diff options
Diffstat (limited to 'sys/contrib/dev/acpica/dsopcode.c')
-rw-r--r-- | sys/contrib/dev/acpica/dsopcode.c | 1344 |
1 files changed, 1344 insertions, 0 deletions
diff --git a/sys/contrib/dev/acpica/dsopcode.c b/sys/contrib/dev/acpica/dsopcode.c new file mode 100644 index 0000000..7760ac6 --- /dev/null +++ b/sys/contrib/dev/acpica/dsopcode.c @@ -0,0 +1,1344 @@ +/****************************************************************************** + * + * Module Name: dsopcode - Dispatcher Op Region support and handling of + * "control" opcodes + * $Revision: 1.111 $ + * + *****************************************************************************/ + +/****************************************************************************** + * + * 1. Copyright Notice + * + * Some or all of this work - Copyright (c) 1999 - 2007, Intel Corp. + * All rights reserved. + * + * 2. License + * + * 2.1. This is your license from Intel Corp. under its intellectual property + * rights. You may have additional license terms from the party that provided + * you this software, covering your right to use that party's intellectual + * property rights. + * + * 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a + * copy of the source code appearing in this file ("Covered Code") an + * irrevocable, perpetual, worldwide license under Intel's copyrights in the + * base code distributed originally by Intel ("Original Intel Code") to copy, + * make derivatives, distribute, use and display any portion of the Covered + * Code in any form, with the right to sublicense such rights; and + * + * 2.3. Intel grants Licensee a non-exclusive and non-transferable patent + * license (with the right to sublicense), under only those claims of Intel + * patents that are infringed by the Original Intel Code, to make, use, sell, + * offer to sell, and import the Covered Code and derivative works thereof + * solely to the minimum extent necessary to exercise the above copyright + * license, and in no event shall the patent license extend to any additions + * to or modifications of the Original Intel Code. No other license or right + * is granted directly or by implication, estoppel or otherwise; + * + * The above copyright and patent license is granted only if the following + * conditions are met: + * + * 3. Conditions + * + * 3.1. Redistribution of Source with Rights to Further Distribute Source. + * Redistribution of source code of any substantial portion of the Covered + * Code or modification with rights to further distribute source must include + * the above Copyright Notice, the above License, this list of Conditions, + * and the following Disclaimer and Export Compliance provision. In addition, + * Licensee must cause all Covered Code to which Licensee contributes to + * contain a file documenting the changes Licensee made to create that Covered + * Code and the date of any change. Licensee must include in that file the + * documentation of any changes made by any predecessor Licensee. Licensee + * must include a prominent statement that the modification is derived, + * directly or indirectly, from Original Intel Code. + * + * 3.2. Redistribution of Source with no Rights to Further Distribute Source. + * Redistribution of source code of any substantial portion of the Covered + * Code or modification without rights to further distribute source must + * include the following Disclaimer and Export Compliance provision in the + * documentation and/or other materials provided with distribution. In + * addition, Licensee may not authorize further sublicense of source of any + * portion of the Covered Code, and must include terms to the effect that the + * license from Licensee to its licensee is limited to the intellectual + * property embodied in the software Licensee provides to its licensee, and + * not to intellectual property embodied in modifications its licensee may + * make. + * + * 3.3. Redistribution of Executable. Redistribution in executable form of any + * substantial portion of the Covered Code or modification must reproduce the + * above Copyright Notice, and the following Disclaimer and Export Compliance + * provision in the documentation and/or other materials provided with the + * distribution. + * + * 3.4. Intel retains all right, title, and interest in and to the Original + * Intel Code. + * + * 3.5. Neither the name Intel nor any other trademark owned or controlled by + * Intel shall be used in advertising or otherwise to promote the sale, use or + * other dealings in products derived from or relating to the Covered Code + * without prior written authorization from Intel. + * + * 4. Disclaimer and Export Compliance + * + * 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED + * HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE + * IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE, + * INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY + * UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY + * IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A + * PARTICULAR PURPOSE. + * + * 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES + * OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR + * COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT, + * SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY + * CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL + * HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS + * SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY + * LIMITED REMEDY. + * + * 4.3. Licensee shall not export, either directly or indirectly, any of this + * software or system incorporating such software without first obtaining any + * required license or other approval from the U. S. Department of Commerce or + * any other agency or department of the United States Government. In the + * event Licensee exports any such software from the United States or + * re-exports any such software from a foreign destination, Licensee shall + * ensure that the distribution and export/re-export of the software is in + * compliance with all laws, regulations, orders, or other restrictions of the + * U.S. Export Administration Regulations. Licensee agrees that neither it nor + * any of its subsidiaries will export/re-export any technical data, process, + * software, or service, directly or indirectly, to any country for which the + * United States government or any agency thereof requires an export license, + * other governmental approval, or letter of assurance, without first obtaining + * such license, approval or letter. + * + *****************************************************************************/ + +#define __DSOPCODE_C__ + +#include <contrib/dev/acpica/acpi.h> +#include <contrib/dev/acpica/acparser.h> +#include <contrib/dev/acpica/amlcode.h> +#include <contrib/dev/acpica/acdispat.h> +#include <contrib/dev/acpica/acinterp.h> +#include <contrib/dev/acpica/acnamesp.h> +#include <contrib/dev/acpica/acevents.h> + +#define _COMPONENT ACPI_DISPATCHER + ACPI_MODULE_NAME ("dsopcode") + +/* Local prototypes */ + +static ACPI_STATUS +AcpiDsExecuteArguments ( + ACPI_NAMESPACE_NODE *Node, + ACPI_NAMESPACE_NODE *ScopeNode, + UINT32 AmlLength, + UINT8 *AmlStart); + +static ACPI_STATUS +AcpiDsInitBufferField ( + UINT16 AmlOpcode, + ACPI_OPERAND_OBJECT *ObjDesc, + ACPI_OPERAND_OBJECT *BufferDesc, + ACPI_OPERAND_OBJECT *OffsetDesc, + ACPI_OPERAND_OBJECT *LengthDesc, + ACPI_OPERAND_OBJECT *ResultDesc); + + +/******************************************************************************* + * + * FUNCTION: AcpiDsExecuteArguments + * + * PARAMETERS: Node - Object NS node + * ScopeNode - Parent NS node + * AmlLength - Length of executable AML + * AmlStart - Pointer to the AML + * + * RETURN: Status. + * + * DESCRIPTION: Late (deferred) execution of region or field arguments + * + ******************************************************************************/ + +static ACPI_STATUS +AcpiDsExecuteArguments ( + ACPI_NAMESPACE_NODE *Node, + ACPI_NAMESPACE_NODE *ScopeNode, + UINT32 AmlLength, + UINT8 *AmlStart) +{ + ACPI_STATUS Status; + ACPI_PARSE_OBJECT *Op; + ACPI_WALK_STATE *WalkState; + + + ACPI_FUNCTION_TRACE (DsExecuteArguments); + + + /* + * Allocate a new parser op to be the root of the parsed tree + */ + Op = AcpiPsAllocOp (AML_INT_EVAL_SUBTREE_OP); + if (!Op) + { + return_ACPI_STATUS (AE_NO_MEMORY); + } + + /* Save the Node for use in AcpiPsParseAml */ + + Op->Common.Node = ScopeNode; + + /* Create and initialize a new parser state */ + + WalkState = AcpiDsCreateWalkState (0, NULL, NULL, NULL); + if (!WalkState) + { + Status = AE_NO_MEMORY; + goto Cleanup; + } + + Status = AcpiDsInitAmlWalk (WalkState, Op, NULL, AmlStart, + AmlLength, NULL, ACPI_IMODE_LOAD_PASS1); + if (ACPI_FAILURE (Status)) + { + AcpiDsDeleteWalkState (WalkState); + goto Cleanup; + } + + /* Mark this parse as a deferred opcode */ + + WalkState->ParseFlags = ACPI_PARSE_DEFERRED_OP; + WalkState->DeferredNode = Node; + + /* Pass1: Parse the entire declaration */ + + Status = AcpiPsParseAml (WalkState); + if (ACPI_FAILURE (Status)) + { + goto Cleanup; + } + + /* Get and init the Op created above */ + + Op->Common.Node = Node; + AcpiPsDeleteParseTree (Op); + + /* Evaluate the deferred arguments */ + + Op = AcpiPsAllocOp (AML_INT_EVAL_SUBTREE_OP); + if (!Op) + { + return_ACPI_STATUS (AE_NO_MEMORY); + } + + Op->Common.Node = ScopeNode; + + /* Create and initialize a new parser state */ + + WalkState = AcpiDsCreateWalkState (0, NULL, NULL, NULL); + if (!WalkState) + { + Status = AE_NO_MEMORY; + goto Cleanup; + } + + /* Execute the opcode and arguments */ + + Status = AcpiDsInitAmlWalk (WalkState, Op, NULL, AmlStart, + AmlLength, NULL, ACPI_IMODE_EXECUTE); + if (ACPI_FAILURE (Status)) + { + AcpiDsDeleteWalkState (WalkState); + goto Cleanup; + } + + /* Mark this execution as a deferred opcode */ + + WalkState->DeferredNode = Node; + Status = AcpiPsParseAml (WalkState); + +Cleanup: + AcpiPsDeleteParseTree (Op); + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiDsGetBufferFieldArguments + * + * PARAMETERS: ObjDesc - A valid BufferField object + * + * RETURN: Status. + * + * DESCRIPTION: Get BufferField Buffer and Index. This implements the late + * evaluation of these field attributes. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiDsGetBufferFieldArguments ( + ACPI_OPERAND_OBJECT *ObjDesc) +{ + ACPI_OPERAND_OBJECT *ExtraDesc; + ACPI_NAMESPACE_NODE *Node; + ACPI_STATUS Status; + + + ACPI_FUNCTION_TRACE_PTR (DsGetBufferFieldArguments, ObjDesc); + + + if (ObjDesc->Common.Flags & AOPOBJ_DATA_VALID) + { + return_ACPI_STATUS (AE_OK); + } + + /* Get the AML pointer (method object) and BufferField node */ + + ExtraDesc = AcpiNsGetSecondaryObject (ObjDesc); + Node = ObjDesc->BufferField.Node; + + ACPI_DEBUG_EXEC(AcpiUtDisplayInitPathname (ACPI_TYPE_BUFFER_FIELD, Node, NULL)); + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "[%4.4s] BufferField Arg Init\n", + AcpiUtGetNodeName (Node))); + + /* Execute the AML code for the TermArg arguments */ + + Status = AcpiDsExecuteArguments (Node, AcpiNsGetParentNode (Node), + ExtraDesc->Extra.AmlLength, ExtraDesc->Extra.AmlStart); + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiDsGetBufferArguments + * + * PARAMETERS: ObjDesc - A valid Buffer object + * + * RETURN: Status. + * + * DESCRIPTION: Get Buffer length and initializer byte list. This implements + * the late evaluation of these attributes. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiDsGetBufferArguments ( + ACPI_OPERAND_OBJECT *ObjDesc) +{ + ACPI_NAMESPACE_NODE *Node; + ACPI_STATUS Status; + + + ACPI_FUNCTION_TRACE_PTR (DsGetBufferArguments, ObjDesc); + + + if (ObjDesc->Common.Flags & AOPOBJ_DATA_VALID) + { + return_ACPI_STATUS (AE_OK); + } + + /* Get the Buffer node */ + + Node = ObjDesc->Buffer.Node; + if (!Node) + { + ACPI_ERROR ((AE_INFO, + "No pointer back to NS node in buffer obj %p", ObjDesc)); + return_ACPI_STATUS (AE_AML_INTERNAL); + } + + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Buffer Arg Init\n")); + + /* Execute the AML code for the TermArg arguments */ + + Status = AcpiDsExecuteArguments (Node, Node, + ObjDesc->Buffer.AmlLength, ObjDesc->Buffer.AmlStart); + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiDsGetPackageArguments + * + * PARAMETERS: ObjDesc - A valid Package object + * + * RETURN: Status. + * + * DESCRIPTION: Get Package length and initializer byte list. This implements + * the late evaluation of these attributes. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiDsGetPackageArguments ( + ACPI_OPERAND_OBJECT *ObjDesc) +{ + ACPI_NAMESPACE_NODE *Node; + ACPI_STATUS Status; + + + ACPI_FUNCTION_TRACE_PTR (DsGetPackageArguments, ObjDesc); + + + if (ObjDesc->Common.Flags & AOPOBJ_DATA_VALID) + { + return_ACPI_STATUS (AE_OK); + } + + /* Get the Package node */ + + Node = ObjDesc->Package.Node; + if (!Node) + { + ACPI_ERROR ((AE_INFO, + "No pointer back to NS node in package %p", ObjDesc)); + return_ACPI_STATUS (AE_AML_INTERNAL); + } + + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Package Arg Init\n")); + + /* Execute the AML code for the TermArg arguments */ + + Status = AcpiDsExecuteArguments (Node, Node, + ObjDesc->Package.AmlLength, ObjDesc->Package.AmlStart); + return_ACPI_STATUS (Status); +} + + +/***************************************************************************** + * + * FUNCTION: AcpiDsGetRegionArguments + * + * PARAMETERS: ObjDesc - A valid region object + * + * RETURN: Status. + * + * DESCRIPTION: Get region address and length. This implements the late + * evaluation of these region attributes. + * + ****************************************************************************/ + +ACPI_STATUS +AcpiDsGetRegionArguments ( + ACPI_OPERAND_OBJECT *ObjDesc) +{ + ACPI_NAMESPACE_NODE *Node; + ACPI_STATUS Status; + ACPI_OPERAND_OBJECT *ExtraDesc; + + + ACPI_FUNCTION_TRACE_PTR (DsGetRegionArguments, ObjDesc); + + + if (ObjDesc->Region.Flags & AOPOBJ_DATA_VALID) + { + return_ACPI_STATUS (AE_OK); + } + + ExtraDesc = AcpiNsGetSecondaryObject (ObjDesc); + if (!ExtraDesc) + { + return_ACPI_STATUS (AE_NOT_EXIST); + } + + /* Get the Region node */ + + Node = ObjDesc->Region.Node; + + ACPI_DEBUG_EXEC (AcpiUtDisplayInitPathname (ACPI_TYPE_REGION, Node, NULL)); + + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "[%4.4s] OpRegion Arg Init at AML %p\n", + AcpiUtGetNodeName (Node), ExtraDesc->Extra.AmlStart)); + + /* Execute the argument AML */ + + Status = AcpiDsExecuteArguments (Node, AcpiNsGetParentNode (Node), + ExtraDesc->Extra.AmlLength, ExtraDesc->Extra.AmlStart); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + /* Validate the region address/length via the host OS */ + + Status = AcpiOsValidateAddress (ObjDesc->Region.SpaceId, + ObjDesc->Region.Address, (ACPI_SIZE) ObjDesc->Region.Length); + if (ACPI_FAILURE (Status)) + { + /* + * Invalid address/length. We will emit an error message and mark + * the region as invalid, so that it will cause an additional error if + * it is ever used. Then return AE_OK. + */ + ACPI_EXCEPTION ((AE_INFO, Status, + "During address validation of OpRegion [%4.4s]", Node->Name.Ascii)); + ObjDesc->Common.Flags |= AOPOBJ_INVALID; + Status = AE_OK; + } + + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiDsInitializeRegion + * + * PARAMETERS: ObjHandle - Region namespace node + * + * RETURN: Status + * + * DESCRIPTION: Front end to EvInitializeRegion + * + ******************************************************************************/ + +ACPI_STATUS +AcpiDsInitializeRegion ( + ACPI_HANDLE ObjHandle) +{ + ACPI_OPERAND_OBJECT *ObjDesc; + ACPI_STATUS Status; + + + ObjDesc = AcpiNsGetAttachedObject (ObjHandle); + + /* Namespace is NOT locked */ + + Status = AcpiEvInitializeRegion (ObjDesc, FALSE); + return (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiDsInitBufferField + * + * PARAMETERS: AmlOpcode - CreateXxxField + * ObjDesc - BufferField object + * BufferDesc - Host Buffer + * OffsetDesc - Offset into buffer + * LengthDesc - Length of field (CREATE_FIELD_OP only) + * ResultDesc - Where to store the result + * + * RETURN: Status + * + * DESCRIPTION: Perform actual initialization of a buffer field + * + ******************************************************************************/ + +static ACPI_STATUS +AcpiDsInitBufferField ( + UINT16 AmlOpcode, + ACPI_OPERAND_OBJECT *ObjDesc, + ACPI_OPERAND_OBJECT *BufferDesc, + ACPI_OPERAND_OBJECT *OffsetDesc, + ACPI_OPERAND_OBJECT *LengthDesc, + ACPI_OPERAND_OBJECT *ResultDesc) +{ + UINT32 Offset; + UINT32 BitOffset; + UINT32 BitCount; + UINT8 FieldFlags; + ACPI_STATUS Status; + + + ACPI_FUNCTION_TRACE_PTR (DsInitBufferField, ObjDesc); + + + /* Host object must be a Buffer */ + + if (ACPI_GET_OBJECT_TYPE (BufferDesc) != ACPI_TYPE_BUFFER) + { + ACPI_ERROR ((AE_INFO, + "Target of Create Field is not a Buffer object - %s", + AcpiUtGetObjectTypeName (BufferDesc))); + + Status = AE_AML_OPERAND_TYPE; + goto Cleanup; + } + + /* + * The last parameter to all of these opcodes (ResultDesc) started + * out as a NameString, and should therefore now be a NS node + * after resolution in AcpiExResolveOperands(). + */ + if (ACPI_GET_DESCRIPTOR_TYPE (ResultDesc) != ACPI_DESC_TYPE_NAMED) + { + ACPI_ERROR ((AE_INFO, + "(%s) destination not a NS Node [%s]", + AcpiPsGetOpcodeName (AmlOpcode), + AcpiUtGetDescriptorName (ResultDesc))); + + Status = AE_AML_OPERAND_TYPE; + goto Cleanup; + } + + Offset = (UINT32) OffsetDesc->Integer.Value; + + /* + * Setup the Bit offsets and counts, according to the opcode + */ + switch (AmlOpcode) + { + case AML_CREATE_FIELD_OP: + + /* Offset is in bits, count is in bits */ + + FieldFlags = AML_FIELD_ACCESS_BYTE; + BitOffset = Offset; + BitCount = (UINT32) LengthDesc->Integer.Value; + + /* Must have a valid (>0) bit count */ + + if (BitCount == 0) + { + ACPI_ERROR ((AE_INFO, + "Attempt to CreateField of length zero")); + Status = AE_AML_OPERAND_VALUE; + goto Cleanup; + } + break; + + case AML_CREATE_BIT_FIELD_OP: + + /* Offset is in bits, Field is one bit */ + + BitOffset = Offset; + BitCount = 1; + FieldFlags = AML_FIELD_ACCESS_BYTE; + break; + + case AML_CREATE_BYTE_FIELD_OP: + + /* Offset is in bytes, field is one byte */ + + BitOffset = 8 * Offset; + BitCount = 8; + FieldFlags = AML_FIELD_ACCESS_BYTE; + break; + + case AML_CREATE_WORD_FIELD_OP: + + /* Offset is in bytes, field is one word */ + + BitOffset = 8 * Offset; + BitCount = 16; + FieldFlags = AML_FIELD_ACCESS_WORD; + break; + + case AML_CREATE_DWORD_FIELD_OP: + + /* Offset is in bytes, field is one dword */ + + BitOffset = 8 * Offset; + BitCount = 32; + FieldFlags = AML_FIELD_ACCESS_DWORD; + break; + + case AML_CREATE_QWORD_FIELD_OP: + + /* Offset is in bytes, field is one qword */ + + BitOffset = 8 * Offset; + BitCount = 64; + FieldFlags = AML_FIELD_ACCESS_QWORD; + break; + + default: + + ACPI_ERROR ((AE_INFO, + "Unknown field creation opcode %02x", + AmlOpcode)); + Status = AE_AML_BAD_OPCODE; + goto Cleanup; + } + + /* Entire field must fit within the current length of the buffer */ + + if ((BitOffset + BitCount) > + (8 * (UINT32) BufferDesc->Buffer.Length)) + { + ACPI_ERROR ((AE_INFO, + "Field [%4.4s] at %d exceeds Buffer [%4.4s] size %d (bits)", + AcpiUtGetNodeName (ResultDesc), + BitOffset + BitCount, + AcpiUtGetNodeName (BufferDesc->Buffer.Node), + 8 * (UINT32) BufferDesc->Buffer.Length)); + Status = AE_AML_BUFFER_LIMIT; + goto Cleanup; + } + + /* + * Initialize areas of the field object that are common to all fields + * For FieldFlags, use LOCK_RULE = 0 (NO_LOCK), + * UPDATE_RULE = 0 (UPDATE_PRESERVE) + */ + Status = AcpiExPrepCommonFieldObject (ObjDesc, FieldFlags, 0, + BitOffset, BitCount); + if (ACPI_FAILURE (Status)) + { + goto Cleanup; + } + + ObjDesc->BufferField.BufferObj = BufferDesc; + + /* Reference count for BufferDesc inherits ObjDesc count */ + + BufferDesc->Common.ReferenceCount = (UINT16) + (BufferDesc->Common.ReferenceCount + ObjDesc->Common.ReferenceCount); + + +Cleanup: + + /* Always delete the operands */ + + AcpiUtRemoveReference (OffsetDesc); + AcpiUtRemoveReference (BufferDesc); + + if (AmlOpcode == AML_CREATE_FIELD_OP) + { + AcpiUtRemoveReference (LengthDesc); + } + + /* On failure, delete the result descriptor */ + + if (ACPI_FAILURE (Status)) + { + AcpiUtRemoveReference (ResultDesc); /* Result descriptor */ + } + else + { + /* Now the address and length are valid for this BufferField */ + + ObjDesc->BufferField.Flags |= AOPOBJ_DATA_VALID; + } + + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiDsEvalBufferFieldOperands + * + * PARAMETERS: WalkState - Current walk + * Op - A valid BufferField Op object + * + * RETURN: Status + * + * DESCRIPTION: Get BufferField Buffer and Index + * Called from AcpiDsExecEndOp during BufferField parse tree walk + * + ******************************************************************************/ + +ACPI_STATUS +AcpiDsEvalBufferFieldOperands ( + ACPI_WALK_STATE *WalkState, + ACPI_PARSE_OBJECT *Op) +{ + ACPI_STATUS Status; + ACPI_OPERAND_OBJECT *ObjDesc; + ACPI_NAMESPACE_NODE *Node; + ACPI_PARSE_OBJECT *NextOp; + + + ACPI_FUNCTION_TRACE_PTR (DsEvalBufferFieldOperands, Op); + + + /* + * This is where we evaluate the address and length fields of the + * CreateXxxField declaration + */ + Node = Op->Common.Node; + + /* NextOp points to the op that holds the Buffer */ + + NextOp = Op->Common.Value.Arg; + + /* Evaluate/create the address and length operands */ + + Status = AcpiDsCreateOperands (WalkState, NextOp); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + ObjDesc = AcpiNsGetAttachedObject (Node); + if (!ObjDesc) + { + return_ACPI_STATUS (AE_NOT_EXIST); + } + + /* Resolve the operands */ + + Status = AcpiExResolveOperands (Op->Common.AmlOpcode, + ACPI_WALK_OPERANDS, WalkState); + + ACPI_DUMP_OPERANDS (ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE, + AcpiPsGetOpcodeName (Op->Common.AmlOpcode), + WalkState->NumOperands, "after AcpiExResolveOperands"); + + if (ACPI_FAILURE (Status)) + { + ACPI_ERROR ((AE_INFO, "(%s) bad operand(s) (%X)", + AcpiPsGetOpcodeName (Op->Common.AmlOpcode), Status)); + + return_ACPI_STATUS (Status); + } + + /* Initialize the Buffer Field */ + + if (Op->Common.AmlOpcode == AML_CREATE_FIELD_OP) + { + /* NOTE: Slightly different operands for this opcode */ + + Status = AcpiDsInitBufferField (Op->Common.AmlOpcode, ObjDesc, + WalkState->Operands[0], WalkState->Operands[1], + WalkState->Operands[2], WalkState->Operands[3]); + } + else + { + /* All other, CreateXxxField opcodes */ + + Status = AcpiDsInitBufferField (Op->Common.AmlOpcode, ObjDesc, + WalkState->Operands[0], WalkState->Operands[1], + NULL, WalkState->Operands[2]); + } + + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiDsEvalRegionOperands + * + * PARAMETERS: WalkState - Current walk + * Op - A valid region Op object + * + * RETURN: Status + * + * DESCRIPTION: Get region address and length + * Called from AcpiDsExecEndOp during OpRegion parse tree walk + * + ******************************************************************************/ + +ACPI_STATUS +AcpiDsEvalRegionOperands ( + ACPI_WALK_STATE *WalkState, + ACPI_PARSE_OBJECT *Op) +{ + ACPI_STATUS Status; + ACPI_OPERAND_OBJECT *ObjDesc; + ACPI_OPERAND_OBJECT *OperandDesc; + ACPI_NAMESPACE_NODE *Node; + ACPI_PARSE_OBJECT *NextOp; + + + ACPI_FUNCTION_TRACE_PTR (DsEvalRegionOperands, Op); + + + /* + * This is where we evaluate the address and length fields of the + * OpRegion declaration + */ + Node = Op->Common.Node; + + /* NextOp points to the op that holds the SpaceID */ + + NextOp = Op->Common.Value.Arg; + + /* NextOp points to address op */ + + NextOp = NextOp->Common.Next; + + /* Evaluate/create the address and length operands */ + + Status = AcpiDsCreateOperands (WalkState, NextOp); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + /* Resolve the length and address operands to numbers */ + + Status = AcpiExResolveOperands (Op->Common.AmlOpcode, + ACPI_WALK_OPERANDS, WalkState); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + ACPI_DUMP_OPERANDS (ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE, + AcpiPsGetOpcodeName (Op->Common.AmlOpcode), + 1, "after AcpiExResolveOperands"); + + ObjDesc = AcpiNsGetAttachedObject (Node); + if (!ObjDesc) + { + return_ACPI_STATUS (AE_NOT_EXIST); + } + + /* + * Get the length operand and save it + * (at Top of stack) + */ + OperandDesc = WalkState->Operands[WalkState->NumOperands - 1]; + + ObjDesc->Region.Length = (UINT32) OperandDesc->Integer.Value; + AcpiUtRemoveReference (OperandDesc); + + /* + * Get the address and save it + * (at top of stack - 1) + */ + OperandDesc = WalkState->Operands[WalkState->NumOperands - 2]; + + ObjDesc->Region.Address = (ACPI_PHYSICAL_ADDRESS) + OperandDesc->Integer.Value; + AcpiUtRemoveReference (OperandDesc); + + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n", + ObjDesc, + ACPI_FORMAT_UINT64 (ObjDesc->Region.Address), + ObjDesc->Region.Length)); + + /* Now the address and length are valid for this opregion */ + + ObjDesc->Region.Flags |= AOPOBJ_DATA_VALID; + + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiDsEvalDataObjectOperands + * + * PARAMETERS: WalkState - Current walk + * Op - A valid DataObject Op object + * ObjDesc - DataObject + * + * RETURN: Status + * + * DESCRIPTION: Get the operands and complete the following data object types: + * Buffer, Package. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiDsEvalDataObjectOperands ( + ACPI_WALK_STATE *WalkState, + ACPI_PARSE_OBJECT *Op, + ACPI_OPERAND_OBJECT *ObjDesc) +{ + ACPI_STATUS Status; + ACPI_OPERAND_OBJECT *ArgDesc; + UINT32 Length; + + + ACPI_FUNCTION_TRACE (DsEvalDataObjectOperands); + + + /* The first operand (for all of these data objects) is the length */ + + /* + * Set proper index into operand stack for AcpiDsObjStackPush + * invoked inside AcpiDsCreateOperand. + */ + WalkState->OperandIndex = WalkState->NumOperands; + + Status = AcpiDsCreateOperand (WalkState, Op->Common.Value.Arg, 1); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + Status = AcpiExResolveOperands (WalkState->Opcode, + &(WalkState->Operands [WalkState->NumOperands -1]), + WalkState); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + /* Extract length operand */ + + ArgDesc = WalkState->Operands [WalkState->NumOperands - 1]; + Length = (UINT32) ArgDesc->Integer.Value; + + /* Cleanup for length operand */ + + Status = AcpiDsObjStackPop (1, WalkState); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + AcpiUtRemoveReference (ArgDesc); + + /* + * Create the actual data object + */ + switch (Op->Common.AmlOpcode) + { + case AML_BUFFER_OP: + + Status = AcpiDsBuildInternalBufferObj (WalkState, Op, Length, &ObjDesc); + break; + + case AML_PACKAGE_OP: + case AML_VAR_PACKAGE_OP: + + Status = AcpiDsBuildInternalPackageObj (WalkState, Op, Length, &ObjDesc); + break; + + default: + return_ACPI_STATUS (AE_AML_BAD_OPCODE); + } + + if (ACPI_SUCCESS (Status)) + { + /* + * Return the object in the WalkState, unless the parent is a package - + * in this case, the return object will be stored in the parse tree + * for the package. + */ + if ((!Op->Common.Parent) || + ((Op->Common.Parent->Common.AmlOpcode != AML_PACKAGE_OP) && + (Op->Common.Parent->Common.AmlOpcode != AML_VAR_PACKAGE_OP) && + (Op->Common.Parent->Common.AmlOpcode != AML_NAME_OP))) + { + WalkState->ResultObj = ObjDesc; + } + } + + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiDsExecBeginControlOp + * + * PARAMETERS: WalkList - The list that owns the walk stack + * Op - The control Op + * + * RETURN: Status + * + * DESCRIPTION: Handles all control ops encountered during control method + * execution. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiDsExecBeginControlOp ( + ACPI_WALK_STATE *WalkState, + ACPI_PARSE_OBJECT *Op) +{ + ACPI_STATUS Status = AE_OK; + ACPI_GENERIC_STATE *ControlState; + + + ACPI_FUNCTION_NAME (DsExecBeginControlOp); + + + ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p Opcode=%2.2X State=%p\n", Op, + Op->Common.AmlOpcode, WalkState)); + + switch (Op->Common.AmlOpcode) + { + case AML_IF_OP: + case AML_WHILE_OP: + + /* + * IF/WHILE: Create a new control state to manage these + * constructs. We need to manage these as a stack, in order + * to handle nesting. + */ + ControlState = AcpiUtCreateControlState (); + if (!ControlState) + { + Status = AE_NO_MEMORY; + break; + } + /* + * Save a pointer to the predicate for multiple executions + * of a loop + */ + ControlState->Control.AmlPredicateStart = WalkState->ParserState.Aml - 1; + ControlState->Control.PackageEnd = WalkState->ParserState.PkgEnd; + ControlState->Control.Opcode = Op->Common.AmlOpcode; + + + /* Push the control state on this walk's control stack */ + + AcpiUtPushGenericState (&WalkState->ControlState, ControlState); + break; + + case AML_ELSE_OP: + + /* Predicate is in the state object */ + /* If predicate is true, the IF was executed, ignore ELSE part */ + + if (WalkState->LastPredicate) + { + Status = AE_CTRL_TRUE; + } + + break; + + case AML_RETURN_OP: + + break; + + default: + break; + } + + return (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiDsExecEndControlOp + * + * PARAMETERS: WalkList - The list that owns the walk stack + * Op - The control Op + * + * RETURN: Status + * + * DESCRIPTION: Handles all control ops encountered during control method + * execution. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiDsExecEndControlOp ( + ACPI_WALK_STATE *WalkState, + ACPI_PARSE_OBJECT *Op) +{ + ACPI_STATUS Status = AE_OK; + ACPI_GENERIC_STATE *ControlState; + + + ACPI_FUNCTION_NAME (DsExecEndControlOp); + + + switch (Op->Common.AmlOpcode) + { + case AML_IF_OP: + + ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[IF_OP] Op=%p\n", Op)); + + /* + * Save the result of the predicate in case there is an + * ELSE to come + */ + WalkState->LastPredicate = + (BOOLEAN) WalkState->ControlState->Common.Value; + + /* + * Pop the control state that was created at the start + * of the IF and free it + */ + ControlState = AcpiUtPopGenericState (&WalkState->ControlState); + AcpiUtDeleteGenericState (ControlState); + break; + + + case AML_ELSE_OP: + + break; + + + case AML_WHILE_OP: + + ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[WHILE_OP] Op=%p\n", Op)); + + if (WalkState->ControlState->Common.Value) + { + /* Predicate was true, go back and evaluate it again! */ + + Status = AE_CTRL_PENDING; + } + + ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, + "[WHILE_OP] termination! Op=%p\n",Op)); + + /* Pop this control state and free it */ + + ControlState = AcpiUtPopGenericState (&WalkState->ControlState); + + WalkState->AmlLastWhile = ControlState->Control.AmlPredicateStart; + AcpiUtDeleteGenericState (ControlState); + break; + + + case AML_RETURN_OP: + + ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, + "[RETURN_OP] Op=%p Arg=%p\n",Op, Op->Common.Value.Arg)); + + /* + * One optional operand -- the return value + * It can be either an immediate operand or a result that + * has been bubbled up the tree + */ + if (Op->Common.Value.Arg) + { + /* Since we have a real Return(), delete any implicit return */ + + AcpiDsClearImplicitReturn (WalkState); + + /* Return statement has an immediate operand */ + + Status = AcpiDsCreateOperands (WalkState, Op->Common.Value.Arg); + if (ACPI_FAILURE (Status)) + { + return (Status); + } + + /* + * If value being returned is a Reference (such as + * an arg or local), resolve it now because it may + * cease to exist at the end of the method. + */ + Status = AcpiExResolveToValue (&WalkState->Operands [0], WalkState); + if (ACPI_FAILURE (Status)) + { + return (Status); + } + + /* + * Get the return value and save as the last result + * value. This is the only place where WalkState->ReturnDesc + * is set to anything other than zero! + */ + WalkState->ReturnDesc = WalkState->Operands[0]; + } + else if (WalkState->ResultCount) + { + /* Since we have a real Return(), delete any implicit return */ + + AcpiDsClearImplicitReturn (WalkState); + + /* + * The return value has come from a previous calculation. + * + * If value being returned is a Reference (such as + * an arg or local), resolve it now because it may + * cease to exist at the end of the method. + * + * Allow references created by the Index operator to return unchanged. + */ + if ((ACPI_GET_DESCRIPTOR_TYPE (WalkState->Results->Results.ObjDesc[0]) == ACPI_DESC_TYPE_OPERAND) && + (ACPI_GET_OBJECT_TYPE (WalkState->Results->Results.ObjDesc [0]) == ACPI_TYPE_LOCAL_REFERENCE) && + ((WalkState->Results->Results.ObjDesc [0])->Reference.Opcode != AML_INDEX_OP)) + { + Status = AcpiExResolveToValue (&WalkState->Results->Results.ObjDesc [0], WalkState); + if (ACPI_FAILURE (Status)) + { + return (Status); + } + } + + WalkState->ReturnDesc = WalkState->Results->Results.ObjDesc [0]; + } + else + { + /* No return operand */ + + if (WalkState->NumOperands) + { + AcpiUtRemoveReference (WalkState->Operands [0]); + } + + WalkState->Operands [0] = NULL; + WalkState->NumOperands = 0; + WalkState->ReturnDesc = NULL; + } + + + ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, + "Completed RETURN_OP State=%p, RetVal=%p\n", + WalkState, WalkState->ReturnDesc)); + + /* End the control method execution right now */ + + Status = AE_CTRL_TERMINATE; + break; + + + case AML_NOOP_OP: + + /* Just do nothing! */ + break; + + + case AML_BREAK_POINT_OP: + + /* Call up to the OS service layer to handle this */ + + Status = AcpiOsSignal (ACPI_SIGNAL_BREAKPOINT, "Executed AML Breakpoint opcode"); + + /* If and when it returns, all done. */ + + break; + + + case AML_BREAK_OP: + case AML_CONTINUE_OP: /* ACPI 2.0 */ + + + /* Pop and delete control states until we find a while */ + + while (WalkState->ControlState && + (WalkState->ControlState->Control.Opcode != AML_WHILE_OP)) + { + ControlState = AcpiUtPopGenericState (&WalkState->ControlState); + AcpiUtDeleteGenericState (ControlState); + } + + /* No while found? */ + + if (!WalkState->ControlState) + { + return (AE_AML_NO_WHILE); + } + + /* Was: WalkState->AmlLastWhile = WalkState->ControlState->Control.AmlPredicateStart; */ + + WalkState->AmlLastWhile = WalkState->ControlState->Control.PackageEnd; + + /* Return status depending on opcode */ + + if (Op->Common.AmlOpcode == AML_BREAK_OP) + { + Status = AE_CTRL_BREAK; + } + else + { + Status = AE_CTRL_CONTINUE; + } + break; + + + default: + + ACPI_ERROR ((AE_INFO, "Unknown control opcode=%X Op=%p", + Op->Common.AmlOpcode, Op)); + + Status = AE_AML_BAD_OPCODE; + break; + } + + return (Status); +} + |