diff options
Diffstat (limited to 'sys/contrib/dev/acpica/components/resources/rscalc.c')
-rw-r--r-- | sys/contrib/dev/acpica/components/resources/rscalc.c | 750 |
1 files changed, 750 insertions, 0 deletions
diff --git a/sys/contrib/dev/acpica/components/resources/rscalc.c b/sys/contrib/dev/acpica/components/resources/rscalc.c new file mode 100644 index 0000000..7fadb41 --- /dev/null +++ b/sys/contrib/dev/acpica/components/resources/rscalc.c @@ -0,0 +1,750 @@ +/******************************************************************************* + * + * Module Name: rscalc - Calculate stream and list lengths + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2013, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#define __RSCALC_C__ + +#include <contrib/dev/acpica/include/acpi.h> +#include <contrib/dev/acpica/include/accommon.h> +#include <contrib/dev/acpica/include/acresrc.h> +#include <contrib/dev/acpica/include/acnamesp.h> + + +#define _COMPONENT ACPI_RESOURCES + ACPI_MODULE_NAME ("rscalc") + + +/* Local prototypes */ + +static UINT8 +AcpiRsCountSetBits ( + UINT16 BitField); + +static ACPI_RS_LENGTH +AcpiRsStructOptionLength ( + ACPI_RESOURCE_SOURCE *ResourceSource); + +static UINT32 +AcpiRsStreamOptionLength ( + UINT32 ResourceLength, + UINT32 MinimumTotalLength); + + +/******************************************************************************* + * + * FUNCTION: AcpiRsCountSetBits + * + * PARAMETERS: BitField - Field in which to count bits + * + * RETURN: Number of bits set within the field + * + * DESCRIPTION: Count the number of bits set in a resource field. Used for + * (Short descriptor) interrupt and DMA lists. + * + ******************************************************************************/ + +static UINT8 +AcpiRsCountSetBits ( + UINT16 BitField) +{ + UINT8 BitsSet; + + + ACPI_FUNCTION_ENTRY (); + + + for (BitsSet = 0; BitField; BitsSet++) + { + /* Zero the least significant bit that is set */ + + BitField &= (UINT16) (BitField - 1); + } + + return (BitsSet); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiRsStructOptionLength + * + * PARAMETERS: ResourceSource - Pointer to optional descriptor field + * + * RETURN: Status + * + * DESCRIPTION: Common code to handle optional ResourceSourceIndex and + * ResourceSource fields in some Large descriptors. Used during + * list-to-stream conversion + * + ******************************************************************************/ + +static ACPI_RS_LENGTH +AcpiRsStructOptionLength ( + ACPI_RESOURCE_SOURCE *ResourceSource) +{ + ACPI_FUNCTION_ENTRY (); + + + /* + * If the ResourceSource string is valid, return the size of the string + * (StringLength includes the NULL terminator) plus the size of the + * ResourceSourceIndex (1). + */ + if (ResourceSource->StringPtr) + { + return ((ACPI_RS_LENGTH) (ResourceSource->StringLength + 1)); + } + + return (0); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiRsStreamOptionLength + * + * PARAMETERS: ResourceLength - Length from the resource header + * MinimumTotalLength - Minimum length of this resource, before + * any optional fields. Includes header size + * + * RETURN: Length of optional string (0 if no string present) + * + * DESCRIPTION: Common code to handle optional ResourceSourceIndex and + * ResourceSource fields in some Large descriptors. Used during + * stream-to-list conversion + * + ******************************************************************************/ + +static UINT32 +AcpiRsStreamOptionLength ( + UINT32 ResourceLength, + UINT32 MinimumAmlResourceLength) +{ + UINT32 StringLength = 0; + + + ACPI_FUNCTION_ENTRY (); + + + /* + * The ResourceSourceIndex and ResourceSource are optional elements of some + * Large-type resource descriptors. + */ + + /* + * If the length of the actual resource descriptor is greater than the ACPI + * spec-defined minimum length, it means that a ResourceSourceIndex exists + * and is followed by a (required) null terminated string. The string length + * (including the null terminator) is the resource length minus the minimum + * length, minus one byte for the ResourceSourceIndex itself. + */ + if (ResourceLength > MinimumAmlResourceLength) + { + /* Compute the length of the optional string */ + + StringLength = ResourceLength - MinimumAmlResourceLength - 1; + } + + /* + * Round the length up to a multiple of the native word in order to + * guarantee that the entire resource descriptor is native word aligned + */ + return ((UINT32) ACPI_ROUND_UP_TO_NATIVE_WORD (StringLength)); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiRsGetAmlLength + * + * PARAMETERS: Resource - Pointer to the resource linked list + * SizeNeeded - Where the required size is returned + * + * RETURN: Status + * + * DESCRIPTION: Takes a linked list of internal resource descriptors and + * calculates the size buffer needed to hold the corresponding + * external resource byte stream. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiRsGetAmlLength ( + ACPI_RESOURCE *Resource, + ACPI_SIZE *SizeNeeded) +{ + ACPI_SIZE AmlSizeNeeded = 0; + ACPI_RS_LENGTH TotalSize; + + + ACPI_FUNCTION_TRACE (RsGetAmlLength); + + + /* Traverse entire list of internal resource descriptors */ + + while (Resource) + { + /* Validate the descriptor type */ + + if (Resource->Type > ACPI_RESOURCE_TYPE_MAX) + { + return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE); + } + + /* Sanity check the length. It must not be zero, or we loop forever */ + + if (!Resource->Length) + { + return_ACPI_STATUS (AE_AML_BAD_RESOURCE_LENGTH); + } + + /* Get the base size of the (external stream) resource descriptor */ + + TotalSize = AcpiGbl_AmlResourceSizes [Resource->Type]; + + /* + * Augment the base size for descriptors with optional and/or + * variable-length fields + */ + switch (Resource->Type) + { + case ACPI_RESOURCE_TYPE_IRQ: + + /* Length can be 3 or 2 */ + + if (Resource->Data.Irq.DescriptorLength == 2) + { + TotalSize--; + } + break; + + + case ACPI_RESOURCE_TYPE_START_DEPENDENT: + + /* Length can be 1 or 0 */ + + if (Resource->Data.Irq.DescriptorLength == 0) + { + TotalSize--; + } + break; + + + case ACPI_RESOURCE_TYPE_VENDOR: + /* + * Vendor Defined Resource: + * For a Vendor Specific resource, if the Length is between 1 and 7 + * it will be created as a Small Resource data type, otherwise it + * is a Large Resource data type. + */ + if (Resource->Data.Vendor.ByteLength > 7) + { + /* Base size of a Large resource descriptor */ + + TotalSize = sizeof (AML_RESOURCE_LARGE_HEADER); + } + + /* Add the size of the vendor-specific data */ + + TotalSize = (ACPI_RS_LENGTH) + (TotalSize + Resource->Data.Vendor.ByteLength); + break; + + + case ACPI_RESOURCE_TYPE_END_TAG: + /* + * End Tag: + * We are done -- return the accumulated total size. + */ + *SizeNeeded = AmlSizeNeeded + TotalSize; + + /* Normal exit */ + + return_ACPI_STATUS (AE_OK); + + + case ACPI_RESOURCE_TYPE_ADDRESS16: + /* + * 16-Bit Address Resource: + * Add the size of the optional ResourceSource info + */ + TotalSize = (ACPI_RS_LENGTH) + (TotalSize + AcpiRsStructOptionLength ( + &Resource->Data.Address16.ResourceSource)); + break; + + + case ACPI_RESOURCE_TYPE_ADDRESS32: + /* + * 32-Bit Address Resource: + * Add the size of the optional ResourceSource info + */ + TotalSize = (ACPI_RS_LENGTH) + (TotalSize + AcpiRsStructOptionLength ( + &Resource->Data.Address32.ResourceSource)); + break; + + + case ACPI_RESOURCE_TYPE_ADDRESS64: + /* + * 64-Bit Address Resource: + * Add the size of the optional ResourceSource info + */ + TotalSize = (ACPI_RS_LENGTH) + (TotalSize + AcpiRsStructOptionLength ( + &Resource->Data.Address64.ResourceSource)); + break; + + + case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: + /* + * Extended IRQ Resource: + * Add the size of each additional optional interrupt beyond the + * required 1 (4 bytes for each UINT32 interrupt number) + */ + TotalSize = (ACPI_RS_LENGTH) + (TotalSize + + ((Resource->Data.ExtendedIrq.InterruptCount - 1) * 4) + + + /* Add the size of the optional ResourceSource info */ + + AcpiRsStructOptionLength ( + &Resource->Data.ExtendedIrq.ResourceSource)); + break; + + + case ACPI_RESOURCE_TYPE_GPIO: + + TotalSize = (ACPI_RS_LENGTH) (TotalSize + (Resource->Data.Gpio.PinTableLength * 2) + + Resource->Data.Gpio.ResourceSource.StringLength + + Resource->Data.Gpio.VendorLength); + + break; + + + case ACPI_RESOURCE_TYPE_SERIAL_BUS: + + TotalSize = AcpiGbl_AmlResourceSerialBusSizes [Resource->Data.CommonSerialBus.Type]; + + TotalSize = (ACPI_RS_LENGTH) (TotalSize + + Resource->Data.I2cSerialBus.ResourceSource.StringLength + + Resource->Data.I2cSerialBus.VendorLength); + + break; + + default: + + break; + } + + /* Update the total */ + + AmlSizeNeeded += TotalSize; + + /* Point to the next object */ + + Resource = ACPI_ADD_PTR (ACPI_RESOURCE, Resource, Resource->Length); + } + + /* Did not find an EndTag resource descriptor */ + + return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiRsGetListLength + * + * PARAMETERS: AmlBuffer - Pointer to the resource byte stream + * AmlBufferLength - Size of AmlBuffer + * SizeNeeded - Where the size needed is returned + * + * RETURN: Status + * + * DESCRIPTION: Takes an external resource byte stream and calculates the size + * buffer needed to hold the corresponding internal resource + * descriptor linked list. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiRsGetListLength ( + UINT8 *AmlBuffer, + UINT32 AmlBufferLength, + ACPI_SIZE *SizeNeeded) +{ + ACPI_STATUS Status; + UINT8 *EndAml; + UINT8 *Buffer; + UINT32 BufferSize; + UINT16 Temp16; + UINT16 ResourceLength; + UINT32 ExtraStructBytes; + UINT8 ResourceIndex; + UINT8 MinimumAmlResourceLength; + AML_RESOURCE *AmlResource; + + + ACPI_FUNCTION_TRACE (RsGetListLength); + + + *SizeNeeded = ACPI_RS_SIZE_MIN; /* Minimum size is one EndTag */ + EndAml = AmlBuffer + AmlBufferLength; + + /* Walk the list of AML resource descriptors */ + + while (AmlBuffer < EndAml) + { + /* Validate the Resource Type and Resource Length */ + + Status = AcpiUtValidateResource (NULL, AmlBuffer, &ResourceIndex); + if (ACPI_FAILURE (Status)) + { + /* + * Exit on failure. Cannot continue because the descriptor length + * may be bogus also. + */ + return_ACPI_STATUS (Status); + } + + AmlResource = (void *) AmlBuffer; + + /* Get the resource length and base (minimum) AML size */ + + ResourceLength = AcpiUtGetResourceLength (AmlBuffer); + MinimumAmlResourceLength = AcpiGbl_ResourceAmlSizes[ResourceIndex]; + + /* + * Augment the size for descriptors with optional + * and/or variable length fields + */ + ExtraStructBytes = 0; + Buffer = AmlBuffer + AcpiUtGetResourceHeaderLength (AmlBuffer); + + switch (AcpiUtGetResourceType (AmlBuffer)) + { + case ACPI_RESOURCE_NAME_IRQ: + /* + * IRQ Resource: + * Get the number of bits set in the 16-bit IRQ mask + */ + ACPI_MOVE_16_TO_16 (&Temp16, Buffer); + ExtraStructBytes = AcpiRsCountSetBits (Temp16); + break; + + + case ACPI_RESOURCE_NAME_DMA: + /* + * DMA Resource: + * Get the number of bits set in the 8-bit DMA mask + */ + ExtraStructBytes = AcpiRsCountSetBits (*Buffer); + break; + + + case ACPI_RESOURCE_NAME_VENDOR_SMALL: + case ACPI_RESOURCE_NAME_VENDOR_LARGE: + /* + * Vendor Resource: + * Get the number of vendor data bytes + */ + ExtraStructBytes = ResourceLength; + + /* + * There is already one byte included in the minimum + * descriptor size. If there are extra struct bytes, + * subtract one from the count. + */ + if (ExtraStructBytes) + { + ExtraStructBytes--; + } + break; + + + case ACPI_RESOURCE_NAME_END_TAG: + /* + * End Tag: This is the normal exit + */ + return_ACPI_STATUS (AE_OK); + + + case ACPI_RESOURCE_NAME_ADDRESS32: + case ACPI_RESOURCE_NAME_ADDRESS16: + case ACPI_RESOURCE_NAME_ADDRESS64: + /* + * Address Resource: + * Add the size of the optional ResourceSource + */ + ExtraStructBytes = AcpiRsStreamOptionLength ( + ResourceLength, MinimumAmlResourceLength); + break; + + + case ACPI_RESOURCE_NAME_EXTENDED_IRQ: + /* + * Extended IRQ Resource: + * Using the InterruptTableLength, add 4 bytes for each additional + * interrupt. Note: at least one interrupt is required and is + * included in the minimum descriptor size (reason for the -1) + */ + ExtraStructBytes = (Buffer[1] - 1) * sizeof (UINT32); + + /* Add the size of the optional ResourceSource */ + + ExtraStructBytes += AcpiRsStreamOptionLength ( + ResourceLength - ExtraStructBytes, MinimumAmlResourceLength); + break; + + case ACPI_RESOURCE_NAME_GPIO: + + /* Vendor data is optional */ + + if (AmlResource->Gpio.VendorLength) + { + ExtraStructBytes += AmlResource->Gpio.VendorOffset - + AmlResource->Gpio.PinTableOffset + AmlResource->Gpio.VendorLength; + } + else + { + ExtraStructBytes += AmlResource->LargeHeader.ResourceLength + + sizeof (AML_RESOURCE_LARGE_HEADER) - + AmlResource->Gpio.PinTableOffset; + } + break; + + case ACPI_RESOURCE_NAME_SERIAL_BUS: + + MinimumAmlResourceLength = AcpiGbl_ResourceAmlSerialBusSizes[ + AmlResource->CommonSerialBus.Type]; + ExtraStructBytes += AmlResource->CommonSerialBus.ResourceLength - + MinimumAmlResourceLength; + break; + + default: + + break; + } + + /* + * Update the required buffer size for the internal descriptor structs + * + * Important: Round the size up for the appropriate alignment. This + * is a requirement on IA64. + */ + if (AcpiUtGetResourceType (AmlBuffer) == ACPI_RESOURCE_NAME_SERIAL_BUS) + { + BufferSize = AcpiGbl_ResourceStructSerialBusSizes[ + AmlResource->CommonSerialBus.Type] + ExtraStructBytes; + } + else + { + BufferSize = AcpiGbl_ResourceStructSizes[ResourceIndex] + + ExtraStructBytes; + } + BufferSize = (UINT32) ACPI_ROUND_UP_TO_NATIVE_WORD (BufferSize); + + *SizeNeeded += BufferSize; + + ACPI_DEBUG_PRINT ((ACPI_DB_RESOURCES, + "Type %.2X, AmlLength %.2X InternalLength %.2X\n", + AcpiUtGetResourceType (AmlBuffer), + AcpiUtGetDescriptorLength (AmlBuffer), BufferSize)); + + /* + * Point to the next resource within the AML stream using the length + * contained in the resource descriptor header + */ + AmlBuffer += AcpiUtGetDescriptorLength (AmlBuffer); + } + + /* Did not find an EndTag resource descriptor */ + + return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiRsGetPciRoutingTableLength + * + * PARAMETERS: PackageObject - Pointer to the package object + * BufferSizeNeeded - UINT32 pointer of the size buffer + * needed to properly return the + * parsed data + * + * RETURN: Status + * + * DESCRIPTION: Given a package representing a PCI routing table, this + * calculates the size of the corresponding linked list of + * descriptions. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiRsGetPciRoutingTableLength ( + ACPI_OPERAND_OBJECT *PackageObject, + ACPI_SIZE *BufferSizeNeeded) +{ + UINT32 NumberOfElements; + ACPI_SIZE TempSizeNeeded = 0; + ACPI_OPERAND_OBJECT **TopObjectList; + UINT32 Index; + ACPI_OPERAND_OBJECT *PackageElement; + ACPI_OPERAND_OBJECT **SubObjectList; + BOOLEAN NameFound; + UINT32 TableIndex; + + + ACPI_FUNCTION_TRACE (RsGetPciRoutingTableLength); + + + NumberOfElements = PackageObject->Package.Count; + + /* + * Calculate the size of the return buffer. + * The base size is the number of elements * the sizes of the + * structures. Additional space for the strings is added below. + * The minus one is to subtract the size of the UINT8 Source[1] + * member because it is added below. + * + * But each PRT_ENTRY structure has a pointer to a string and + * the size of that string must be found. + */ + TopObjectList = PackageObject->Package.Elements; + + for (Index = 0; Index < NumberOfElements; Index++) + { + /* Dereference the sub-package */ + + PackageElement = *TopObjectList; + + /* We must have a valid Package object */ + + if (!PackageElement || + (PackageElement->Common.Type != ACPI_TYPE_PACKAGE)) + { + return_ACPI_STATUS (AE_AML_OPERAND_TYPE); + } + + /* + * The SubObjectList will now point to an array of the + * four IRQ elements: Address, Pin, Source and SourceIndex + */ + SubObjectList = PackageElement->Package.Elements; + + /* Scan the IrqTableElements for the Source Name String */ + + NameFound = FALSE; + + for (TableIndex = 0; + TableIndex < PackageElement->Package.Count && !NameFound; + TableIndex++) + { + if (*SubObjectList && /* Null object allowed */ + + ((ACPI_TYPE_STRING == + (*SubObjectList)->Common.Type) || + + ((ACPI_TYPE_LOCAL_REFERENCE == + (*SubObjectList)->Common.Type) && + + ((*SubObjectList)->Reference.Class == + ACPI_REFCLASS_NAME)))) + { + NameFound = TRUE; + } + else + { + /* Look at the next element */ + + SubObjectList++; + } + } + + TempSizeNeeded += (sizeof (ACPI_PCI_ROUTING_TABLE) - 4); + + /* Was a String type found? */ + + if (NameFound) + { + if ((*SubObjectList)->Common.Type == ACPI_TYPE_STRING) + { + /* + * The length String.Length field does not include the + * terminating NULL, add 1 + */ + TempSizeNeeded += ((ACPI_SIZE) + (*SubObjectList)->String.Length + 1); + } + else + { + TempSizeNeeded += AcpiNsGetPathnameLength ( + (*SubObjectList)->Reference.Node); + } + } + else + { + /* + * If no name was found, then this is a NULL, which is + * translated as a UINT32 zero. + */ + TempSizeNeeded += sizeof (UINT32); + } + + /* Round up the size since each element must be aligned */ + + TempSizeNeeded = ACPI_ROUND_UP_TO_64BIT (TempSizeNeeded); + + /* Point to the next ACPI_OPERAND_OBJECT */ + + TopObjectList++; + } + + /* + * Add an extra element to the end of the list, essentially a + * NULL terminator + */ + *BufferSizeNeeded = TempSizeNeeded + sizeof (ACPI_PCI_ROUTING_TABLE); + return_ACPI_STATUS (AE_OK); +} |