diff options
Diffstat (limited to 'sys/contrib/dev/acpica/components/events/evgpeblk.c')
| -rw-r--r-- | sys/contrib/dev/acpica/components/events/evgpeblk.c | 550 |
1 files changed, 550 insertions, 0 deletions
diff --git a/sys/contrib/dev/acpica/components/events/evgpeblk.c b/sys/contrib/dev/acpica/components/events/evgpeblk.c new file mode 100644 index 0000000..6a1c04a --- /dev/null +++ b/sys/contrib/dev/acpica/components/events/evgpeblk.c @@ -0,0 +1,550 @@ +/****************************************************************************** + * + * Module Name: evgpeblk - GPE block creation and initialization. + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <contrib/dev/acpica/include/acpi.h> +#include <contrib/dev/acpica/include/accommon.h> +#include <contrib/dev/acpica/include/acevents.h> +#include <contrib/dev/acpica/include/acnamesp.h> + +#define _COMPONENT ACPI_EVENTS + ACPI_MODULE_NAME ("evgpeblk") + +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ + +/* Local prototypes */ + +static ACPI_STATUS +AcpiEvInstallGpeBlock ( + ACPI_GPE_BLOCK_INFO *GpeBlock, + UINT32 InterruptNumber); + +static ACPI_STATUS +AcpiEvCreateGpeInfoBlocks ( + ACPI_GPE_BLOCK_INFO *GpeBlock); + + +/******************************************************************************* + * + * FUNCTION: AcpiEvInstallGpeBlock + * + * PARAMETERS: GpeBlock - New GPE block + * InterruptNumber - Xrupt to be associated with this + * GPE block + * + * RETURN: Status + * + * DESCRIPTION: Install new GPE block with mutex support + * + ******************************************************************************/ + +static ACPI_STATUS +AcpiEvInstallGpeBlock ( + ACPI_GPE_BLOCK_INFO *GpeBlock, + UINT32 InterruptNumber) +{ + ACPI_GPE_BLOCK_INFO *NextGpeBlock; + ACPI_GPE_XRUPT_INFO *GpeXruptBlock; + ACPI_STATUS Status; + ACPI_CPU_FLAGS Flags; + + + ACPI_FUNCTION_TRACE (EvInstallGpeBlock); + + + Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + GpeXruptBlock = AcpiEvGetGpeXruptBlock (InterruptNumber); + if (!GpeXruptBlock) + { + Status = AE_NO_MEMORY; + goto UnlockAndExit; + } + + /* Install the new block at the end of the list with lock */ + + Flags = AcpiOsAcquireLock (AcpiGbl_GpeLock); + if (GpeXruptBlock->GpeBlockListHead) + { + NextGpeBlock = GpeXruptBlock->GpeBlockListHead; + while (NextGpeBlock->Next) + { + NextGpeBlock = NextGpeBlock->Next; + } + + NextGpeBlock->Next = GpeBlock; + GpeBlock->Previous = NextGpeBlock; + } + else + { + GpeXruptBlock->GpeBlockListHead = GpeBlock; + } + + GpeBlock->XruptBlock = GpeXruptBlock; + AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags); + + +UnlockAndExit: + Status = AcpiUtReleaseMutex (ACPI_MTX_EVENTS); + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiEvDeleteGpeBlock + * + * PARAMETERS: GpeBlock - Existing GPE block + * + * RETURN: Status + * + * DESCRIPTION: Remove a GPE block + * + ******************************************************************************/ + +ACPI_STATUS +AcpiEvDeleteGpeBlock ( + ACPI_GPE_BLOCK_INFO *GpeBlock) +{ + ACPI_STATUS Status; + ACPI_CPU_FLAGS Flags; + + + ACPI_FUNCTION_TRACE (EvInstallGpeBlock); + + + Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + /* Disable all GPEs in this block */ + + Status = AcpiHwDisableGpeBlock (GpeBlock->XruptBlock, GpeBlock, NULL); + + if (!GpeBlock->Previous && !GpeBlock->Next) + { + /* This is the last GpeBlock on this interrupt */ + + Status = AcpiEvDeleteGpeXrupt (GpeBlock->XruptBlock); + if (ACPI_FAILURE (Status)) + { + goto UnlockAndExit; + } + } + else + { + /* Remove the block on this interrupt with lock */ + + Flags = AcpiOsAcquireLock (AcpiGbl_GpeLock); + if (GpeBlock->Previous) + { + GpeBlock->Previous->Next = GpeBlock->Next; + } + else + { + GpeBlock->XruptBlock->GpeBlockListHead = GpeBlock->Next; + } + + if (GpeBlock->Next) + { + GpeBlock->Next->Previous = GpeBlock->Previous; + } + AcpiOsReleaseLock (AcpiGbl_GpeLock, Flags); + } + + AcpiCurrentGpeCount -= GpeBlock->GpeCount; + + /* Free the GpeBlock */ + + ACPI_FREE (GpeBlock->RegisterInfo); + ACPI_FREE (GpeBlock->EventInfo); + ACPI_FREE (GpeBlock); + +UnlockAndExit: + Status = AcpiUtReleaseMutex (ACPI_MTX_EVENTS); + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiEvCreateGpeInfoBlocks + * + * PARAMETERS: GpeBlock - New GPE block + * + * RETURN: Status + * + * DESCRIPTION: Create the RegisterInfo and EventInfo blocks for this GPE block + * + ******************************************************************************/ + +static ACPI_STATUS +AcpiEvCreateGpeInfoBlocks ( + ACPI_GPE_BLOCK_INFO *GpeBlock) +{ + ACPI_GPE_REGISTER_INFO *GpeRegisterInfo = NULL; + ACPI_GPE_EVENT_INFO *GpeEventInfo = NULL; + ACPI_GPE_EVENT_INFO *ThisEvent; + ACPI_GPE_REGISTER_INFO *ThisRegister; + UINT32 i; + UINT32 j; + ACPI_STATUS Status; + + + ACPI_FUNCTION_TRACE (EvCreateGpeInfoBlocks); + + + /* Allocate the GPE register information block */ + + GpeRegisterInfo = ACPI_ALLOCATE_ZEROED ( + (ACPI_SIZE) GpeBlock->RegisterCount * + sizeof (ACPI_GPE_REGISTER_INFO)); + if (!GpeRegisterInfo) + { + ACPI_ERROR ((AE_INFO, + "Could not allocate the GpeRegisterInfo table")); + return_ACPI_STATUS (AE_NO_MEMORY); + } + + /* + * Allocate the GPE EventInfo block. There are eight distinct GPEs + * per register. Initialization to zeros is sufficient. + */ + GpeEventInfo = ACPI_ALLOCATE_ZEROED ((ACPI_SIZE) GpeBlock->GpeCount * + sizeof (ACPI_GPE_EVENT_INFO)); + if (!GpeEventInfo) + { + ACPI_ERROR ((AE_INFO, + "Could not allocate the GpeEventInfo table")); + Status = AE_NO_MEMORY; + goto ErrorExit; + } + + /* Save the new Info arrays in the GPE block */ + + GpeBlock->RegisterInfo = GpeRegisterInfo; + GpeBlock->EventInfo = GpeEventInfo; + + /* + * Initialize the GPE Register and Event structures. A goal of these + * tables is to hide the fact that there are two separate GPE register + * sets in a given GPE hardware block, the status registers occupy the + * first half, and the enable registers occupy the second half. + */ + ThisRegister = GpeRegisterInfo; + ThisEvent = GpeEventInfo; + + for (i = 0; i < GpeBlock->RegisterCount; i++) + { + /* Init the RegisterInfo for this GPE register (8 GPEs) */ + + ThisRegister->BaseGpeNumber = (UINT8) (GpeBlock->BlockBaseNumber + + (i * ACPI_GPE_REGISTER_WIDTH)); + + ThisRegister->StatusAddress.Address = + GpeBlock->BlockAddress.Address + i; + + ThisRegister->EnableAddress.Address = + GpeBlock->BlockAddress.Address + i + GpeBlock->RegisterCount; + + ThisRegister->StatusAddress.SpaceId = GpeBlock->BlockAddress.SpaceId; + ThisRegister->EnableAddress.SpaceId = GpeBlock->BlockAddress.SpaceId; + ThisRegister->StatusAddress.BitWidth = ACPI_GPE_REGISTER_WIDTH; + ThisRegister->EnableAddress.BitWidth = ACPI_GPE_REGISTER_WIDTH; + ThisRegister->StatusAddress.BitOffset = 0; + ThisRegister->EnableAddress.BitOffset = 0; + + /* Init the EventInfo for each GPE within this register */ + + for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) + { + ThisEvent->GpeNumber = (UINT8) (ThisRegister->BaseGpeNumber + j); + ThisEvent->RegisterInfo = ThisRegister; + ThisEvent++; + } + + /* Disable all GPEs within this register */ + + Status = AcpiHwWrite (0x00, &ThisRegister->EnableAddress); + if (ACPI_FAILURE (Status)) + { + goto ErrorExit; + } + + /* Clear any pending GPE events within this register */ + + Status = AcpiHwWrite (0xFF, &ThisRegister->StatusAddress); + if (ACPI_FAILURE (Status)) + { + goto ErrorExit; + } + + ThisRegister++; + } + + return_ACPI_STATUS (AE_OK); + + +ErrorExit: + if (GpeRegisterInfo) + { + ACPI_FREE (GpeRegisterInfo); + } + if (GpeEventInfo) + { + ACPI_FREE (GpeEventInfo); + } + + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiEvCreateGpeBlock + * + * PARAMETERS: GpeDevice - Handle to the parent GPE block + * GpeBlockAddress - Address and SpaceID + * RegisterCount - Number of GPE register pairs in the block + * GpeBlockBaseNumber - Starting GPE number for the block + * InterruptNumber - H/W interrupt for the block + * ReturnGpeBlock - Where the new block descriptor is returned + * + * RETURN: Status + * + * DESCRIPTION: Create and Install a block of GPE registers. All GPEs within + * the block are disabled at exit. + * Note: Assumes namespace is locked. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiEvCreateGpeBlock ( + ACPI_NAMESPACE_NODE *GpeDevice, + ACPI_GENERIC_ADDRESS *GpeBlockAddress, + UINT32 RegisterCount, + UINT8 GpeBlockBaseNumber, + UINT32 InterruptNumber, + ACPI_GPE_BLOCK_INFO **ReturnGpeBlock) +{ + ACPI_STATUS Status; + ACPI_GPE_BLOCK_INFO *GpeBlock; + ACPI_GPE_WALK_INFO WalkInfo; + + + ACPI_FUNCTION_TRACE (EvCreateGpeBlock); + + + if (!RegisterCount) + { + return_ACPI_STATUS (AE_OK); + } + + /* Allocate a new GPE block */ + + GpeBlock = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_GPE_BLOCK_INFO)); + if (!GpeBlock) + { + return_ACPI_STATUS (AE_NO_MEMORY); + } + + /* Initialize the new GPE block */ + + GpeBlock->Node = GpeDevice; + GpeBlock->GpeCount = (UINT16) (RegisterCount * ACPI_GPE_REGISTER_WIDTH); + GpeBlock->Initialized = FALSE; + GpeBlock->RegisterCount = RegisterCount; + GpeBlock->BlockBaseNumber = GpeBlockBaseNumber; + + ACPI_MEMCPY (&GpeBlock->BlockAddress, GpeBlockAddress, + sizeof (ACPI_GENERIC_ADDRESS)); + + /* + * Create the RegisterInfo and EventInfo sub-structures + * Note: disables and clears all GPEs in the block + */ + Status = AcpiEvCreateGpeInfoBlocks (GpeBlock); + if (ACPI_FAILURE (Status)) + { + ACPI_FREE (GpeBlock); + return_ACPI_STATUS (Status); + } + + /* Install the new block in the global lists */ + + Status = AcpiEvInstallGpeBlock (GpeBlock, InterruptNumber); + if (ACPI_FAILURE (Status)) + { + ACPI_FREE (GpeBlock); + return_ACPI_STATUS (Status); + } + + AcpiGbl_AllGpesInitialized = FALSE; + + /* Find all GPE methods (_Lxx or_Exx) for this block */ + + WalkInfo.GpeBlock = GpeBlock; + WalkInfo.GpeDevice = GpeDevice; + WalkInfo.ExecuteByOwnerId = FALSE; + + Status = AcpiNsWalkNamespace (ACPI_TYPE_METHOD, GpeDevice, + ACPI_UINT32_MAX, ACPI_NS_WALK_NO_UNLOCK, + AcpiEvMatchGpeMethod, NULL, &WalkInfo, NULL); + + /* Return the new block */ + + if (ReturnGpeBlock) + { + (*ReturnGpeBlock) = GpeBlock; + } + + ACPI_DEBUG_PRINT ((ACPI_DB_INIT, + "GPE %02X to %02X [%4.4s] %u regs on int 0x%X\n", + (UINT32) GpeBlock->BlockBaseNumber, + (UINT32) (GpeBlock->BlockBaseNumber + (GpeBlock->GpeCount - 1)), + GpeDevice->Name.Ascii, GpeBlock->RegisterCount, + InterruptNumber)); + + /* Update global count of currently available GPEs */ + + AcpiCurrentGpeCount += GpeBlock->GpeCount; + return_ACPI_STATUS (AE_OK); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiEvInitializeGpeBlock + * + * PARAMETERS: ACPI_GPE_CALLBACK + * + * RETURN: Status + * + * DESCRIPTION: Initialize and enable a GPE block. Enable GPEs that have + * associated methods. + * Note: Assumes namespace is locked. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiEvInitializeGpeBlock ( + ACPI_GPE_XRUPT_INFO *GpeXruptInfo, + ACPI_GPE_BLOCK_INFO *GpeBlock, + void *Ignored) +{ + ACPI_STATUS Status; + ACPI_GPE_EVENT_INFO *GpeEventInfo; + UINT32 GpeEnabledCount; + UINT32 GpeIndex; + UINT32 i; + UINT32 j; + + + ACPI_FUNCTION_TRACE (EvInitializeGpeBlock); + + + /* + * Ignore a null GPE block (e.g., if no GPE block 1 exists), and + * any GPE blocks that have been initialized already. + */ + if (!GpeBlock || GpeBlock->Initialized) + { + return_ACPI_STATUS (AE_OK); + } + + /* + * Enable all GPEs that have a corresponding method and have the + * ACPI_GPE_CAN_WAKE flag unset. Any other GPEs within this block + * must be enabled via the acpi_enable_gpe() interface. + */ + GpeEnabledCount = 0; + + for (i = 0; i < GpeBlock->RegisterCount; i++) + { + for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) + { + /* Get the info block for this particular GPE */ + + GpeIndex = (i * ACPI_GPE_REGISTER_WIDTH) + j; + GpeEventInfo = &GpeBlock->EventInfo[GpeIndex]; + + /* + * Ignore GPEs that have no corresponding _Lxx/_Exx method + * and GPEs that are used to wake the system + */ + if (((GpeEventInfo->Flags & ACPI_GPE_DISPATCH_MASK) == ACPI_GPE_DISPATCH_NONE) || + ((GpeEventInfo->Flags & ACPI_GPE_DISPATCH_MASK) == ACPI_GPE_DISPATCH_HANDLER) || + (GpeEventInfo->Flags & ACPI_GPE_CAN_WAKE)) + { + continue; + } + + Status = AcpiEvAddGpeReference (GpeEventInfo); + if (ACPI_FAILURE (Status)) + { + ACPI_EXCEPTION ((AE_INFO, Status, + "Could not enable GPE 0x%02X", + GpeIndex + GpeBlock->BlockBaseNumber)); + continue; + } + + GpeEnabledCount++; + } + } + + if (GpeEnabledCount) + { + ACPI_DEBUG_PRINT ((ACPI_DB_INIT, + "Enabled %u GPEs in this block\n", GpeEnabledCount)); + } + + GpeBlock->Initialized = TRUE; + return_ACPI_STATUS (AE_OK); +} + +#endif /* !ACPI_REDUCED_HARDWARE */ |
