diff options
Diffstat (limited to 'sys/contrib/dev/acpica/components/dispatcher/dsobject.c')
| -rw-r--r-- | sys/contrib/dev/acpica/components/dispatcher/dsobject.c | 867 |
1 files changed, 867 insertions, 0 deletions
diff --git a/sys/contrib/dev/acpica/components/dispatcher/dsobject.c b/sys/contrib/dev/acpica/components/dispatcher/dsobject.c new file mode 100644 index 0000000..16585ae --- /dev/null +++ b/sys/contrib/dev/acpica/components/dispatcher/dsobject.c @@ -0,0 +1,867 @@ +/****************************************************************************** + * + * Module Name: dsobject - Dispatcher object management routines + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#define __DSOBJECT_C__ + +#include <contrib/dev/acpica/include/acpi.h> +#include <contrib/dev/acpica/include/accommon.h> +#include <contrib/dev/acpica/include/acparser.h> +#include <contrib/dev/acpica/include/amlcode.h> +#include <contrib/dev/acpica/include/acdispat.h> +#include <contrib/dev/acpica/include/acnamesp.h> +#include <contrib/dev/acpica/include/acinterp.h> + +#define _COMPONENT ACPI_DISPATCHER + ACPI_MODULE_NAME ("dsobject") + +/* Local prototypes */ + +static ACPI_STATUS +AcpiDsBuildInternalObject ( + ACPI_WALK_STATE *WalkState, + ACPI_PARSE_OBJECT *Op, + ACPI_OPERAND_OBJECT **ObjDescPtr); + + +#ifndef ACPI_NO_METHOD_EXECUTION +/******************************************************************************* + * + * FUNCTION: AcpiDsBuildInternalObject + * + * PARAMETERS: WalkState - Current walk state + * Op - Parser object to be translated + * ObjDescPtr - Where the ACPI internal object is returned + * + * RETURN: Status + * + * DESCRIPTION: Translate a parser Op object to the equivalent namespace object + * Simple objects are any objects other than a package object! + * + ******************************************************************************/ + +static ACPI_STATUS +AcpiDsBuildInternalObject ( + ACPI_WALK_STATE *WalkState, + ACPI_PARSE_OBJECT *Op, + ACPI_OPERAND_OBJECT **ObjDescPtr) +{ + ACPI_OPERAND_OBJECT *ObjDesc; + ACPI_STATUS Status; + ACPI_OBJECT_TYPE Type; + + + ACPI_FUNCTION_TRACE (DsBuildInternalObject); + + + *ObjDescPtr = NULL; + if (Op->Common.AmlOpcode == AML_INT_NAMEPATH_OP) + { + /* + * This is a named object reference. If this name was + * previously looked up in the namespace, it was stored in this op. + * Otherwise, go ahead and look it up now + */ + if (!Op->Common.Node) + { + Status = AcpiNsLookup (WalkState->ScopeInfo, + Op->Common.Value.String, + ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, + ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE, NULL, + ACPI_CAST_INDIRECT_PTR (ACPI_NAMESPACE_NODE, &(Op->Common.Node))); + if (ACPI_FAILURE (Status)) + { + /* Check if we are resolving a named reference within a package */ + + if ((Status == AE_NOT_FOUND) && (AcpiGbl_EnableInterpreterSlack) && + + ((Op->Common.Parent->Common.AmlOpcode == AML_PACKAGE_OP) || + (Op->Common.Parent->Common.AmlOpcode == AML_VAR_PACKAGE_OP))) + { + /* + * We didn't find the target and we are populating elements + * of a package - ignore if slack enabled. Some ASL code + * contains dangling invalid references in packages and + * expects that no exception will be issued. Leave the + * element as a null element. It cannot be used, but it + * can be overwritten by subsequent ASL code - this is + * typically the case. + */ + ACPI_DEBUG_PRINT ((ACPI_DB_INFO, + "Ignoring unresolved reference in package [%4.4s]\n", + WalkState->ScopeInfo->Scope.Node->Name.Ascii)); + + return_ACPI_STATUS (AE_OK); + } + else + { + ACPI_ERROR_NAMESPACE (Op->Common.Value.String, Status); + } + + return_ACPI_STATUS (Status); + } + } + + /* Special object resolution for elements of a package */ + + if ((Op->Common.Parent->Common.AmlOpcode == AML_PACKAGE_OP) || + (Op->Common.Parent->Common.AmlOpcode == AML_VAR_PACKAGE_OP)) + { + /* + * Attempt to resolve the node to a value before we insert it into + * the package. If this is a reference to a common data type, + * resolve it immediately. According to the ACPI spec, package + * elements can only be "data objects" or method references. + * Attempt to resolve to an Integer, Buffer, String or Package. + * If cannot, return the named reference (for things like Devices, + * Methods, etc.) Buffer Fields and Fields will resolve to simple + * objects (int/buf/str/pkg). + * + * NOTE: References to things like Devices, Methods, Mutexes, etc. + * will remain as named references. This behavior is not described + * in the ACPI spec, but it appears to be an oversight. + */ + ObjDesc = ACPI_CAST_PTR (ACPI_OPERAND_OBJECT, Op->Common.Node); + + Status = AcpiExResolveNodeToValue ( + ACPI_CAST_INDIRECT_PTR (ACPI_NAMESPACE_NODE, &ObjDesc), + WalkState); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + /* + * Special handling for Alias objects. We need to setup the type + * and the Op->Common.Node to point to the Alias target. Note, + * Alias has at most one level of indirection internally. + */ + Type = Op->Common.Node->Type; + if (Type == ACPI_TYPE_LOCAL_ALIAS) + { + Type = ObjDesc->Common.Type; + Op->Common.Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, + Op->Common.Node->Object); + } + + switch (Type) + { + /* + * For these types, we need the actual node, not the subobject. + * However, the subobject did not get an extra reference count above. + * + * TBD: should ExResolveNodeToValue be changed to fix this? + */ + case ACPI_TYPE_DEVICE: + case ACPI_TYPE_THERMAL: + + AcpiUtAddReference (Op->Common.Node->Object); + + /*lint -fallthrough */ + /* + * For these types, we need the actual node, not the subobject. + * The subobject got an extra reference count in ExResolveNodeToValue. + */ + case ACPI_TYPE_MUTEX: + case ACPI_TYPE_METHOD: + case ACPI_TYPE_POWER: + case ACPI_TYPE_PROCESSOR: + case ACPI_TYPE_EVENT: + case ACPI_TYPE_REGION: + + /* We will create a reference object for these types below */ + break; + + default: + /* + * All other types - the node was resolved to an actual + * object, we are done. + */ + goto Exit; + } + } + } + + /* Create and init a new internal ACPI object */ + + ObjDesc = AcpiUtCreateInternalObject ( + (AcpiPsGetOpcodeInfo (Op->Common.AmlOpcode))->ObjectType); + if (!ObjDesc) + { + return_ACPI_STATUS (AE_NO_MEMORY); + } + + Status = AcpiDsInitObjectFromOp (WalkState, Op, Op->Common.AmlOpcode, + &ObjDesc); + if (ACPI_FAILURE (Status)) + { + AcpiUtRemoveReference (ObjDesc); + return_ACPI_STATUS (Status); + } + +Exit: + *ObjDescPtr = ObjDesc; + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiDsBuildInternalBufferObj + * + * PARAMETERS: WalkState - Current walk state + * Op - Parser object to be translated + * BufferLength - Length of the buffer + * ObjDescPtr - Where the ACPI internal object is returned + * + * RETURN: Status + * + * DESCRIPTION: Translate a parser Op package object to the equivalent + * namespace object + * + ******************************************************************************/ + +ACPI_STATUS +AcpiDsBuildInternalBufferObj ( + ACPI_WALK_STATE *WalkState, + ACPI_PARSE_OBJECT *Op, + UINT32 BufferLength, + ACPI_OPERAND_OBJECT **ObjDescPtr) +{ + ACPI_PARSE_OBJECT *Arg; + ACPI_OPERAND_OBJECT *ObjDesc; + ACPI_PARSE_OBJECT *ByteList; + UINT32 ByteListLength = 0; + + + ACPI_FUNCTION_TRACE (DsBuildInternalBufferObj); + + + /* + * If we are evaluating a Named buffer object "Name (xxxx, Buffer)". + * The buffer object already exists (from the NS node), otherwise it must + * be created. + */ + ObjDesc = *ObjDescPtr; + if (!ObjDesc) + { + /* Create a new buffer object */ + + ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_BUFFER); + *ObjDescPtr = ObjDesc; + if (!ObjDesc) + { + return_ACPI_STATUS (AE_NO_MEMORY); + } + } + + /* + * Second arg is the buffer data (optional) ByteList can be either + * individual bytes or a string initializer. In either case, a + * ByteList appears in the AML. + */ + Arg = Op->Common.Value.Arg; /* skip first arg */ + + ByteList = Arg->Named.Next; + if (ByteList) + { + if (ByteList->Common.AmlOpcode != AML_INT_BYTELIST_OP) + { + ACPI_ERROR ((AE_INFO, + "Expecting bytelist, found AML opcode 0x%X in op %p", + ByteList->Common.AmlOpcode, ByteList)); + + AcpiUtRemoveReference (ObjDesc); + return (AE_TYPE); + } + + ByteListLength = (UINT32) ByteList->Common.Value.Integer; + } + + /* + * The buffer length (number of bytes) will be the larger of: + * 1) The specified buffer length and + * 2) The length of the initializer byte list + */ + ObjDesc->Buffer.Length = BufferLength; + if (ByteListLength > BufferLength) + { + ObjDesc->Buffer.Length = ByteListLength; + } + + /* Allocate the buffer */ + + if (ObjDesc->Buffer.Length == 0) + { + ObjDesc->Buffer.Pointer = NULL; + ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, + "Buffer defined with zero length in AML, creating\n")); + } + else + { + ObjDesc->Buffer.Pointer = ACPI_ALLOCATE_ZEROED ( + ObjDesc->Buffer.Length); + if (!ObjDesc->Buffer.Pointer) + { + AcpiUtDeleteObjectDesc (ObjDesc); + return_ACPI_STATUS (AE_NO_MEMORY); + } + + /* Initialize buffer from the ByteList (if present) */ + + if (ByteList) + { + ACPI_MEMCPY (ObjDesc->Buffer.Pointer, ByteList->Named.Data, + ByteListLength); + } + } + + ObjDesc->Buffer.Flags |= AOPOBJ_DATA_VALID; + Op->Common.Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, ObjDesc); + return_ACPI_STATUS (AE_OK); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiDsBuildInternalPackageObj + * + * PARAMETERS: WalkState - Current walk state + * Op - Parser object to be translated + * ElementCount - Number of elements in the package - this is + * the NumElements argument to Package() + * ObjDescPtr - Where the ACPI internal object is returned + * + * RETURN: Status + * + * DESCRIPTION: Translate a parser Op package object to the equivalent + * namespace object + * + * NOTE: The number of elements in the package will be always be the NumElements + * count, regardless of the number of elements in the package list. If + * NumElements is smaller, only that many package list elements are used. + * if NumElements is larger, the Package object is padded out with + * objects of type Uninitialized (as per ACPI spec.) + * + * Even though the ASL compilers do not allow NumElements to be smaller + * than the Package list length (for the fixed length package opcode), some + * BIOS code modifies the AML on the fly to adjust the NumElements, and + * this code compensates for that. This also provides compatibility with + * other AML interpreters. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiDsBuildInternalPackageObj ( + ACPI_WALK_STATE *WalkState, + ACPI_PARSE_OBJECT *Op, + UINT32 ElementCount, + ACPI_OPERAND_OBJECT **ObjDescPtr) +{ + ACPI_PARSE_OBJECT *Arg; + ACPI_PARSE_OBJECT *Parent; + ACPI_OPERAND_OBJECT *ObjDesc = NULL; + ACPI_STATUS Status = AE_OK; + UINT32 i; + UINT16 Index; + UINT16 ReferenceCount; + + + ACPI_FUNCTION_TRACE (DsBuildInternalPackageObj); + + + /* Find the parent of a possibly nested package */ + + Parent = Op->Common.Parent; + while ((Parent->Common.AmlOpcode == AML_PACKAGE_OP) || + (Parent->Common.AmlOpcode == AML_VAR_PACKAGE_OP)) + { + Parent = Parent->Common.Parent; + } + + /* + * If we are evaluating a Named package object "Name (xxxx, Package)", + * the package object already exists, otherwise it must be created. + */ + ObjDesc = *ObjDescPtr; + if (!ObjDesc) + { + ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_PACKAGE); + *ObjDescPtr = ObjDesc; + if (!ObjDesc) + { + return_ACPI_STATUS (AE_NO_MEMORY); + } + + ObjDesc->Package.Node = Parent->Common.Node; + } + + /* + * Allocate the element array (array of pointers to the individual + * objects) based on the NumElements parameter. Add an extra pointer slot + * so that the list is always null terminated. + */ + ObjDesc->Package.Elements = ACPI_ALLOCATE_ZEROED ( + ((ACPI_SIZE) ElementCount + 1) * sizeof (void *)); + + if (!ObjDesc->Package.Elements) + { + AcpiUtDeleteObjectDesc (ObjDesc); + return_ACPI_STATUS (AE_NO_MEMORY); + } + + ObjDesc->Package.Count = ElementCount; + + /* + * Initialize the elements of the package, up to the NumElements count. + * Package is automatically padded with uninitialized (NULL) elements + * if NumElements is greater than the package list length. Likewise, + * Package is truncated if NumElements is less than the list length. + */ + Arg = Op->Common.Value.Arg; + Arg = Arg->Common.Next; + for (i = 0; Arg && (i < ElementCount); i++) + { + if (Arg->Common.AmlOpcode == AML_INT_RETURN_VALUE_OP) + { + if (Arg->Common.Node->Type == ACPI_TYPE_METHOD) + { + /* + * A method reference "looks" to the parser to be a method + * invocation, so we special case it here + */ + Arg->Common.AmlOpcode = AML_INT_NAMEPATH_OP; + Status = AcpiDsBuildInternalObject (WalkState, Arg, + &ObjDesc->Package.Elements[i]); + } + else + { + /* This package element is already built, just get it */ + + ObjDesc->Package.Elements[i] = + ACPI_CAST_PTR (ACPI_OPERAND_OBJECT, Arg->Common.Node); + } + } + else + { + Status = AcpiDsBuildInternalObject (WalkState, Arg, + &ObjDesc->Package.Elements[i]); + } + + if (*ObjDescPtr) + { + /* Existing package, get existing reference count */ + + ReferenceCount = (*ObjDescPtr)->Common.ReferenceCount; + if (ReferenceCount > 1) + { + /* Make new element ref count match original ref count */ + + for (Index = 0; Index < (ReferenceCount - 1); Index++) + { + AcpiUtAddReference ((ObjDesc->Package.Elements[i])); + } + } + } + + Arg = Arg->Common.Next; + } + + /* Check for match between NumElements and actual length of PackageList */ + + if (Arg) + { + /* + * NumElements was exhausted, but there are remaining elements in the + * PackageList. Truncate the package to NumElements. + * + * Note: technically, this is an error, from ACPI spec: "It is an error + * for NumElements to be less than the number of elements in the + * PackageList". However, we just print a message and + * no exception is returned. This provides Windows compatibility. Some + * BIOSs will alter the NumElements on the fly, creating this type + * of ill-formed package object. + */ + while (Arg) + { + /* + * We must delete any package elements that were created earlier + * and are not going to be used because of the package truncation. + */ + if (Arg->Common.Node) + { + AcpiUtRemoveReference ( + ACPI_CAST_PTR (ACPI_OPERAND_OBJECT, Arg->Common.Node)); + Arg->Common.Node = NULL; + } + + /* Find out how many elements there really are */ + + i++; + Arg = Arg->Common.Next; + } + + ACPI_INFO ((AE_INFO, + "Actual Package length (%u) is larger than NumElements field (%u), truncated\n", + i, ElementCount)); + } + else if (i < ElementCount) + { + /* + * Arg list (elements) was exhausted, but we did not reach NumElements count. + * Note: this is not an error, the package is padded out with NULLs. + */ + ACPI_DEBUG_PRINT ((ACPI_DB_INFO, + "Package List length (%u) smaller than NumElements count (%u), padded with null elements\n", + i, ElementCount)); + } + + ObjDesc->Package.Flags |= AOPOBJ_DATA_VALID; + Op->Common.Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, ObjDesc); + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiDsCreateNode + * + * PARAMETERS: WalkState - Current walk state + * Node - NS Node to be initialized + * Op - Parser object to be translated + * + * RETURN: Status + * + * DESCRIPTION: Create the object to be associated with a namespace node + * + ******************************************************************************/ + +ACPI_STATUS +AcpiDsCreateNode ( + ACPI_WALK_STATE *WalkState, + ACPI_NAMESPACE_NODE *Node, + ACPI_PARSE_OBJECT *Op) +{ + ACPI_STATUS Status; + ACPI_OPERAND_OBJECT *ObjDesc; + + + ACPI_FUNCTION_TRACE_PTR (DsCreateNode, Op); + + + /* + * Because of the execution pass through the non-control-method + * parts of the table, we can arrive here twice. Only init + * the named object node the first time through + */ + if (AcpiNsGetAttachedObject (Node)) + { + return_ACPI_STATUS (AE_OK); + } + + if (!Op->Common.Value.Arg) + { + /* No arguments, there is nothing to do */ + + return_ACPI_STATUS (AE_OK); + } + + /* Build an internal object for the argument(s) */ + + Status = AcpiDsBuildInternalObject (WalkState, Op->Common.Value.Arg, + &ObjDesc); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + /* Re-type the object according to its argument */ + + Node->Type = ObjDesc->Common.Type; + + /* Attach obj to node */ + + Status = AcpiNsAttachObject (Node, ObjDesc, Node->Type); + + /* Remove local reference to the object */ + + AcpiUtRemoveReference (ObjDesc); + return_ACPI_STATUS (Status); +} + +#endif /* ACPI_NO_METHOD_EXECUTION */ + + +/******************************************************************************* + * + * FUNCTION: AcpiDsInitObjectFromOp + * + * PARAMETERS: WalkState - Current walk state + * Op - Parser op used to init the internal object + * Opcode - AML opcode associated with the object + * RetObjDesc - Namespace object to be initialized + * + * RETURN: Status + * + * DESCRIPTION: Initialize a namespace object from a parser Op and its + * associated arguments. The namespace object is a more compact + * representation of the Op and its arguments. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiDsInitObjectFromOp ( + ACPI_WALK_STATE *WalkState, + ACPI_PARSE_OBJECT *Op, + UINT16 Opcode, + ACPI_OPERAND_OBJECT **RetObjDesc) +{ + const ACPI_OPCODE_INFO *OpInfo; + ACPI_OPERAND_OBJECT *ObjDesc; + ACPI_STATUS Status = AE_OK; + + + ACPI_FUNCTION_TRACE (DsInitObjectFromOp); + + + ObjDesc = *RetObjDesc; + OpInfo = AcpiPsGetOpcodeInfo (Opcode); + if (OpInfo->Class == AML_CLASS_UNKNOWN) + { + /* Unknown opcode */ + + return_ACPI_STATUS (AE_TYPE); + } + + /* Perform per-object initialization */ + + switch (ObjDesc->Common.Type) + { + case ACPI_TYPE_BUFFER: + + /* + * Defer evaluation of Buffer TermArg operand + */ + ObjDesc->Buffer.Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, + WalkState->Operands[0]); + ObjDesc->Buffer.AmlStart = Op->Named.Data; + ObjDesc->Buffer.AmlLength = Op->Named.Length; + break; + + + case ACPI_TYPE_PACKAGE: + + /* + * Defer evaluation of Package TermArg operand + */ + ObjDesc->Package.Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, + WalkState->Operands[0]); + ObjDesc->Package.AmlStart = Op->Named.Data; + ObjDesc->Package.AmlLength = Op->Named.Length; + break; + + + case ACPI_TYPE_INTEGER: + + switch (OpInfo->Type) + { + case AML_TYPE_CONSTANT: + /* + * Resolve AML Constants here - AND ONLY HERE! + * All constants are integers. + * We mark the integer with a flag that indicates that it started + * life as a constant -- so that stores to constants will perform + * as expected (noop). ZeroOp is used as a placeholder for optional + * target operands. + */ + ObjDesc->Common.Flags = AOPOBJ_AML_CONSTANT; + + switch (Opcode) + { + case AML_ZERO_OP: + + ObjDesc->Integer.Value = 0; + break; + + case AML_ONE_OP: + + ObjDesc->Integer.Value = 1; + break; + + case AML_ONES_OP: + + ObjDesc->Integer.Value = ACPI_UINT64_MAX; + + /* Truncate value if we are executing from a 32-bit ACPI table */ + +#ifndef ACPI_NO_METHOD_EXECUTION + AcpiExTruncateFor32bitTable (ObjDesc); +#endif + break; + + case AML_REVISION_OP: + + ObjDesc->Integer.Value = ACPI_CA_VERSION; + break; + + default: + + ACPI_ERROR ((AE_INFO, + "Unknown constant opcode 0x%X", Opcode)); + Status = AE_AML_OPERAND_TYPE; + break; + } + break; + + + case AML_TYPE_LITERAL: + + ObjDesc->Integer.Value = Op->Common.Value.Integer; +#ifndef ACPI_NO_METHOD_EXECUTION + AcpiExTruncateFor32bitTable (ObjDesc); +#endif + break; + + + default: + ACPI_ERROR ((AE_INFO, "Unknown Integer type 0x%X", + OpInfo->Type)); + Status = AE_AML_OPERAND_TYPE; + break; + } + break; + + + case ACPI_TYPE_STRING: + + ObjDesc->String.Pointer = Op->Common.Value.String; + ObjDesc->String.Length = (UINT32) ACPI_STRLEN (Op->Common.Value.String); + + /* + * The string is contained in the ACPI table, don't ever try + * to delete it + */ + ObjDesc->Common.Flags |= AOPOBJ_STATIC_POINTER; + break; + + + case ACPI_TYPE_METHOD: + break; + + + case ACPI_TYPE_LOCAL_REFERENCE: + + switch (OpInfo->Type) + { + case AML_TYPE_LOCAL_VARIABLE: + + /* Local ID (0-7) is (AML opcode - base AML_LOCAL_OP) */ + + ObjDesc->Reference.Value = ((UINT32) Opcode) - AML_LOCAL_OP; + ObjDesc->Reference.Class = ACPI_REFCLASS_LOCAL; + +#ifndef ACPI_NO_METHOD_EXECUTION + Status = AcpiDsMethodDataGetNode (ACPI_REFCLASS_LOCAL, + ObjDesc->Reference.Value, WalkState, + ACPI_CAST_INDIRECT_PTR (ACPI_NAMESPACE_NODE, + &ObjDesc->Reference.Object)); +#endif + break; + + + case AML_TYPE_METHOD_ARGUMENT: + + /* Arg ID (0-6) is (AML opcode - base AML_ARG_OP) */ + + ObjDesc->Reference.Value = ((UINT32) Opcode) - AML_ARG_OP; + ObjDesc->Reference.Class = ACPI_REFCLASS_ARG; + +#ifndef ACPI_NO_METHOD_EXECUTION + Status = AcpiDsMethodDataGetNode (ACPI_REFCLASS_ARG, + ObjDesc->Reference.Value, WalkState, + ACPI_CAST_INDIRECT_PTR (ACPI_NAMESPACE_NODE, + &ObjDesc->Reference.Object)); +#endif + break; + + default: /* Object name or Debug object */ + + switch (Op->Common.AmlOpcode) + { + case AML_INT_NAMEPATH_OP: + + /* Node was saved in Op */ + + ObjDesc->Reference.Node = Op->Common.Node; + ObjDesc->Reference.Object = Op->Common.Node->Object; + ObjDesc->Reference.Class = ACPI_REFCLASS_NAME; + break; + + case AML_DEBUG_OP: + + ObjDesc->Reference.Class = ACPI_REFCLASS_DEBUG; + break; + + default: + + ACPI_ERROR ((AE_INFO, + "Unimplemented reference type for AML opcode: 0x%4.4X", Opcode)); + return_ACPI_STATUS (AE_AML_OPERAND_TYPE); + } + break; + } + break; + + + default: + + ACPI_ERROR ((AE_INFO, "Unimplemented data type: 0x%X", + ObjDesc->Common.Type)); + + Status = AE_AML_OPERAND_TYPE; + break; + } + + return_ACPI_STATUS (Status); +} + + |
