diff options
Diffstat (limited to 'sys/conf')
-rw-r--r-- | sys/conf/Makefile.mips | 74 | ||||
-rw-r--r-- | sys/conf/files.mips | 105 | ||||
-rw-r--r-- | sys/conf/ldscript.mips | 270 | ||||
-rw-r--r-- | sys/conf/ldscript.mips.cfe | 277 | ||||
-rw-r--r-- | sys/conf/options.mips | 29 |
5 files changed, 755 insertions, 0 deletions
diff --git a/sys/conf/Makefile.mips b/sys/conf/Makefile.mips new file mode 100644 index 0000000..443065a --- /dev/null +++ b/sys/conf/Makefile.mips @@ -0,0 +1,74 @@ +# Makefile.mips +# $FreeBSD$ +# +# Makefile for FreeBSD +# +# This makefile is constructed from a machine description: +# config machineid +# Most changes should be made in the machine description +# /sys/mips/conf/``machineid'' +# after which you should do +# config machineid +# Generic makefile changes should be made in +# /sys/conf/Makefile.mips +# after which config should be rerun for all machines. +# + +# Which version of config(8) is required. +%VERSREQ= 600004 + +STD8X16FONT?= iso + +.if !defined(S) +.if exists(./@/.) +S= ./@ +.else +S= ../../.. +.endif +.endif +.include "$S/conf/kern.pre.mk" + +# XXX: Such sweeping assumptions... +MACHINE=mips +MACHINE_ARCH=mips + +MKMODULESENV+= MACHINE=${MACHINE} MACHINE_ARCH=${MACHINE_ARCH} + +# We default to the MIPS32 ISA, if none specified in the +# kernel configuration file. +ARCH_FLAGS?=-march=mips32 + +HACK_EXTRA_FLAGS=-shared +.if defined(TARGET_BIG_ENDIAN) +CFLAGS+=-EB +SYSTEM_LD+=-EB +HACK_EXTRA_FLAGS+=-EB -Wl,-EB +.else +CFLAGS+=-EL +SYSTEM_LD+=-EL +HACK_EXTRA_FLAGS+=-EL -Wl,-EL +.endif + +# We add the -fno-pic flag to kernels because otherwise performance +# is extremely poor, as well as -mno-abicalls to force no ABI usage. +CFLAGS+=-fno-pic -mno-abicalls -G0 $(ARCH_FLAGS) +HACK_EXTRA_FLAGS+=-fno-pic -mno-abicalls -G0 $(ARCH_FLAGS) + +# XXX hardcoded kernel entry point +ASM_CFLAGS+=${CFLAGS} -D_LOCORE -DLOCORE + +%BEFORE_DEPEND + +%OBJS + +%FILES.c + +%FILES.s + +%FILES.m + +%CLEAN + +%RULES + +.include "$S/conf/kern.post.mk" diff --git a/sys/conf/files.mips b/sys/conf/files.mips new file mode 100644 index 0000000..3e21ed3 --- /dev/null +++ b/sys/conf/files.mips @@ -0,0 +1,105 @@ +# This file tells config what files go into building a kernel, +# files marked standard are always included. +# +# Copyright (c) 2001, 2004-2005, Juniper Networks, Inc. +# All rights reserved. +# JNPR: files.mips,v 1.11 2007/08/09 12:25:35 katta +# +# The long compile-with and dependency lines are required because of +# limitations in config: backslash-newline doesn't work in strings, and +# dependency lines other than the first are silently ignored. +# +# ---------------------------------------------------------------------- +# Phase 2 +# ---------------------------------------------------------------------- +# This file tells config what files go into building a kernel, +# files marked standard are always included. +# +# Copyright (c) 2001, 2004-2005, Juniper Networks, Inc. +# All rights reserved. +# JNPR: files.mips,v 1.11 2007/08/09 12:25:35 katta +# $FreeBSD$ +# +# The long compile-with and dependency lines are required because of +# limitations in config: backslash-newline doesn't work in strings, and +# dependency lines other than the first are silently ignored. +# +# ---------------------------------------------------------------------- +# Phase 2 +# ---------------------------------------------------------------------- + +# Juniper didn't include this in their code drop. +#mips/mips/cpuconf.c standard +mips/mips/machdep.c standard +mips/mips/mp_machdep.c optional smp +mips/mips/mips_subr.c standard +mips/mips/psraccess.S standard +# +# ---------------------------------------------------------------------- +# Phase 3 +# ---------------------------------------------------------------------- +mips/mips/autoconf.c standard +mips/mips/cpu.c standard +mips/mips/elf_machdep.c standard +mips/mips/exception.S standard +mips/mips/gdb_machdep.c standard +mips/mips/mainbus.c standard +mips/mips/pmap.c standard +mips/mips/trap.c standard +mips/mips/vm_machdep.c standard +# +# ---------------------------------------------------------------------- +# Phase 4 +# ---------------------------------------------------------------------- +# +mips/mips/tick.c standard +#mips/mips/queue.c standard +# ---------------------------------------------------------------------- +# Phase 5 +# ---------------------------------------------------------------------- +mips/mips/fp.S standard +mips/mips/pm_machdep.c standard +mips/mips/swtch.S standard +mips/mips/tlb.S standard + +mips/mips/busdma_machdep.c standard +mips/mips/cache.c standard +mips/mips/cache_mipsNN.c standard +#mips/mips/copystr.S standard +mips/mips/db_disasm.c optional ddb +mips/mips/db_interface.c optional ddb +mips/mips/db_trace.c optional ddb +mips/mips/dump_machdep.c standard +mips/mips/in_cksum.c optional inet +mips/mips/intr_machdep.c standard +mips/mips/locore.S standard no-obj +mips/mips/mem.c optional mem +mips/mips/nexus.c standard +mips/mips/stack_machdep.c optional ddb | stack +mips/mips/support.S standard +mips/mips/swtch.S standard +mips/mips/uio_machdep.c standard +geom/geom_bsd.c standard +geom/geom_bsd_enc.c standard +geom/geom_mbr.c standard +geom/geom_mbr_enc.c standard +libkern/ashldi3.c standard +libkern/ashrdi3.c standard +libkern/divdi3.c standard +libkern/ffsl.c standard +libkern/fls.c standard +libkern/flsl.c standard +libkern/lshrdi3.c standard +libkern/moddi3.c standard +libkern/qdivrem.c standard +libkern/udivdi3.c standard +libkern/umoddi3.c standard + +#XXX: We can't use these versions, as strcmp.c is included conf/files +#libkern/mips/strcmp.S standard +#libkern/mips/strncmp.S standard + +dev/cfe/cfe_api.c optional cfe +dev/cfe/cfe_console.c optional cfe_console +#dev/cfe/cfe_resource.c optional cfe # not yet needed + diff --git a/sys/conf/ldscript.mips b/sys/conf/ldscript.mips new file mode 100644 index 0000000..c85785d --- /dev/null +++ b/sys/conf/ldscript.mips @@ -0,0 +1,270 @@ +/* $FreeBSD$ */ +OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-littlemips") +OUTPUT_ARCH(mips) +ENTRY(_start) +SEARCH_DIR(/usr/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; +PROVIDE (_DYNAMIC = 0); +*/ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = 0x80100000 + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .gnu.version : { *(.gnu.version) } + .gnu.version_d : { *(.gnu.version_d) } + .gnu.version_r : { *(.gnu.version_r) } + .rel.init : { *(.rel.init) } + .rela.init : { *(.rela.init) } + .rel.text : + { + *(.rel.text) + *(.rel.text.*) + *(.rel.gnu.linkonce.t.*) + } + .rela.text : + { + *(.rela.text) + *(.rela.text.*) + *(.rela.gnu.linkonce.t.*) + } + .rel.fini : { *(.rel.fini) } + .rela.fini : { *(.rela.fini) } + .rel.rodata : + { + *(.rel.rodata) + *(.rel.rodata.*) + *(.rel.gnu.linkonce.r.*) + } + .rela.rodata : + { + *(.rela.rodata) + *(.rela.rodata.*) + *(.rela.gnu.linkonce.r.*) + } + .rel.data : + { + *(.rel.data) + *(.rel.data.*) + *(.rel.gnu.linkonce.d.*) + } + .rela.data : + { + *(.rela.data) + *(.rela.data.*) + *(.rela.gnu.linkonce.d.*) + } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.sdata : + { + *(.rel.sdata) + *(.rel.sdata.*) + *(.rel.gnu.linkonce.s.*) + } + .rela.sdata : + { + *(.rela.sdata) + *(.rela.sdata.*) + *(.rela.gnu.linkonce.s.*) + } + .rel.sbss : + { + *(.rel.sbss) + *(.rel.sbss.*) + *(.rel.gnu.linkonce.sb.*) + } + .rela.sbss : + { + *(.rela.sbss) + *(.rela.sbss.*) + *(.rel.gnu.linkonce.sb.*) + } + .rel.sdata2 : + { + *(.rel.sdata2) + *(.rel.sdata2.*) + *(.rel.gnu.linkonce.s2.*) + } + .rela.sdata2 : + { + *(.rela.sdata2) + *(.rela.sdata2.*) + *(.rela.gnu.linkonce.s2.*) + } + .rel.sbss2 : + { + *(.rel.sbss2) + *(.rel.sbss2.*) + *(.rel.gnu.linkonce.sb2.*) + } + .rela.sbss2 : + { + *(.rela.sbss2) + *(.rela.sbss2.*) + *(.rela.gnu.linkonce.sb2.*) + } + .rel.bss : + { + *(.rel.bss) + *(.rel.bss.*) + *(.rel.gnu.linkonce.b.*) + } + .rela.bss : + { + *(.rela.bss) + *(.rela.bss.*) + *(.rela.gnu.linkonce.b.*) + } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : + { + KEEP (*(.init)) + } =0x1000000 + .text : + { + *(.trap) + *(.text) + *(.text.*) + *(.stub) + /* .gnu.warning sections are handled specially by elf32.em. */ + *(.gnu.warning) + *(.gnu.linkonce.t.*) + } =0x1000000 + .fini : + { + KEEP (*(.fini)) + } =0x1000000 + PROVIDE (__etext = .); + PROVIDE (_etext = .); + PROVIDE (etext = .); + .rodata : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } + .rodata1 : { *(.rodata1) } + .reginfo : { *(.reginfo) } + .sdata2 : { *(.sdata2) *(.sdata2.*) *(.gnu.linkonce.s2.*) } + .sbss2 : { *(.sbss2) *(.sbss2.*) *(.gnu.linkonce.sb2.*) } + . = ALIGN(0x2000) + (. & (0x2000 - 1)); + .data : + { + *(.data) + *(.data.*) + *(.gnu.linkonce.d.*) + SORT(CONSTRUCTORS) + } + .data1 : { *(.data1) } + .eh_frame : { KEEP (*(.eh_frame)) } + .gcc_except_table : { *(.gcc_except_table) } + .ctors : + { + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + /* We don't want to include the .ctor section from + from the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + } + .dtors : + { + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + } + .plt : { *(.plt) } + _gp = ALIGN(16) + 0x7ff0; + .got : { *(.got.plt) *(.got) } + .dynamic : { *(.dynamic) } + /* We want the small data sections together, so single-instruction offsets + can access them all, and initialized data all before uninitialized, so + we can shorten the on-disk segment size. */ + .sdata : + { + *(.sdata) + *(.sdata.*) + *(.gnu.linkonce.s.*) + } + _edata = .; + PROVIDE (edata = .); + __bss_start = .; + .sbss : + { + PROVIDE (__sbss_start = .); + PROVIDE (___sbss_start = .); + *(.dynsbss) + *(.sbss) + *(.sbss.*) + *(.gnu.linkonce.sb.*) + *(.scommon) + PROVIDE (__sbss_end = .); + PROVIDE (___sbss_end = .); + } + .bss : + { + *(.dynbss) + *(.bss) + *(.bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + /* Align here to ensure that the .bss section occupies space up to + _end. Align after .bss to ensure correct alignment even if the + .bss section disappears because there are no input sections. */ + . = ALIGN(64 / 8); + } + . = ALIGN(64 / 8); + _end = .; + PROVIDE (end = .); + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + Symbols in the DWARF debugging sections are relative to the beginning + of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info) *(.gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + /* These must appear regardless of . */ +} diff --git a/sys/conf/ldscript.mips.cfe b/sys/conf/ldscript.mips.cfe new file mode 100644 index 0000000..a7dfb61 --- /dev/null +++ b/sys/conf/ldscript.mips.cfe @@ -0,0 +1,277 @@ +/* + * This linker script is needed to build a kernel for use by Broadcom CFE. + */ + +/* $FreeBSD$ */ +OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-littlemips") +OUTPUT_ARCH(mips) +ENTRY(_start) +SEARCH_DIR(/usr/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; +PROVIDE (_DYNAMIC = 0); +*/ +DYNAMIC_LINK = 0; /* XXX */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = 0x80001000; + .text : + { + *(.trap) + *(.text) + *(.text.*) + *(.stub) + /* .gnu.warning sections are handled specially by elf32.em. */ + *(.gnu.warning) + *(.gnu.linkonce.t.*) + } + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .gnu.version : { *(.gnu.version) } + .gnu.version_d : { *(.gnu.version_d) } + .gnu.version_r : { *(.gnu.version_r) } + .rel.init : { *(.rel.init) } + .rela.init : { *(.rela.init) } + .rel.text : + { + *(.rel.text) + *(.rel.text.*) + *(.rel.gnu.linkonce.t.*) + } + .rela.text : + { + *(.rela.text) + *(.rela.text.*) + *(.rela.gnu.linkonce.t.*) + } + .rel.fini : { *(.rel.fini) } + .rela.fini : { *(.rela.fini) } + .rel.rodata : + { + *(.rel.rodata) + *(.rel.rodata.*) + *(.rel.gnu.linkonce.r.*) + } + .rela.rodata : + { + *(.rela.rodata) + *(.rela.rodata.*) + *(.rela.gnu.linkonce.r.*) + } + .rel.data : + { + *(.rel.data) + *(.rel.data.*) + *(.rel.gnu.linkonce.d.*) + } + .rela.data : + { + *(.rela.data) + *(.rela.data.*) + *(.rela.gnu.linkonce.d.*) + } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.sdata : + { + *(.rel.sdata) + *(.rel.sdata.*) + *(.rel.gnu.linkonce.s.*) + } + .rela.sdata : + { + *(.rela.sdata) + *(.rela.sdata.*) + *(.rela.gnu.linkonce.s.*) + } + .rel.sbss : + { + *(.rel.sbss) + *(.rel.sbss.*) + *(.rel.gnu.linkonce.sb.*) + } + .rela.sbss : + { + *(.rela.sbss) + *(.rela.sbss.*) + *(.rel.gnu.linkonce.sb.*) + } + .rel.sdata2 : + { + *(.rel.sdata2) + *(.rel.sdata2.*) + *(.rel.gnu.linkonce.s2.*) + } + .rela.sdata2 : + { + *(.rela.sdata2) + *(.rela.sdata2.*) + *(.rela.gnu.linkonce.s2.*) + } + .rel.sbss2 : + { + *(.rel.sbss2) + *(.rel.sbss2.*) + *(.rel.gnu.linkonce.sb2.*) + } + .rela.sbss2 : + { + *(.rela.sbss2) + *(.rela.sbss2.*) + *(.rela.gnu.linkonce.sb2.*) + } + .rel.bss : + { + *(.rel.bss) + *(.rel.bss.*) + *(.rel.gnu.linkonce.b.*) + } + .rela.bss : + { + *(.rela.bss) + *(.rela.bss.*) + *(.rela.gnu.linkonce.b.*) + } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + + .init : + { + KEEP (*(.init)) + } + + .fini : + { + KEEP (*(.fini)) + } =0x1000000 + PROVIDE (__etext = .); + PROVIDE (_etext = .); + PROVIDE (etext = .); + .rodata : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } + .rodata1 : { *(.rodata1) } + .reginfo : { *(.reginfo) } + .sdata2 : { *(.sdata2) *(.sdata2.*) *(.gnu.linkonce.s2.*) } + .sbss2 : { *(.sbss2) *(.sbss2.*) *(.gnu.linkonce.sb2.*) } + . = ALIGN(0x2000) + (. & (0x2000 - 1)); + .data : + { + *(.data) + *(.data.*) + *(.gnu.linkonce.d.*) + SORT(CONSTRUCTORS) + } + .data1 : { *(.data1) } + .eh_frame : { KEEP (*(.eh_frame)) } + .gcc_except_table : { *(.gcc_except_table) } + .ctors : + { + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + /* We don't want to include the .ctor section from + from the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + } + .dtors : + { + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + } + .plt : { *(.plt) } + _gp = ALIGN(16) + 0x7ff0; + .got : { *(.got.plt) *(.got) } + .dynamic : { *(.dynamic) } + /* We want the small data sections together, so single-instruction offsets + can access them all, and initialized data all before uninitialized, so + we can shorten the on-disk segment size. */ + .sdata : + { + *(.sdata) + *(.sdata.*) + *(.gnu.linkonce.s.*) + } + _edata = .; + PROVIDE (edata = .); + __bss_start = .; + .sbss : + { + PROVIDE (__sbss_start = .); + PROVIDE (___sbss_start = .); + *(.dynsbss) + *(.sbss) + *(.sbss.*) + *(.gnu.linkonce.sb.*) + *(.scommon) + PROVIDE (__sbss_end = .); + PROVIDE (___sbss_end = .); + } + .bss : + { + *(.dynbss) + *(.bss) + *(.bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + /* Align here to ensure that the .bss section occupies space up to + _end. Align after .bss to ensure correct alignment even if the + .bss section disappears because there are no input sections. */ + . = ALIGN(64 / 8); + } + . = ALIGN(64 / 8); + _end = .; + PROVIDE (end = .); + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + Symbols in the DWARF debugging sections are relative to the beginning + of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info) *(.gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + /* These must appear regardless of . */ +} diff --git a/sys/conf/options.mips b/sys/conf/options.mips new file mode 100644 index 0000000..c67cf19 --- /dev/null +++ b/sys/conf/options.mips @@ -0,0 +1,29 @@ +# $FreeBSD$ + +CPU_MIPS4KC opt_global.h +CPU_MIPS32 opt_global.h +CPU_MIPS64 opt_global.h +CPU_NOFPU opt_global.h +CPU_SENTRY5 opt_global.h + +ISA_MIPS1 opt_cputype.h +ISA_MIPS3 opt_cputype.h +ISA_MIPS32 opt_cputype.h +ISA_MIPS32v2 opt_cputype.h +ISA_MIPS64 opt_cputype.h +ISA_MIPS64v2 opt_cputype.h + +YAMON opt_global.h +CFE opt_global.h +CFE_CONSOLE opt_global.h + +KERNPHYSADDR opt_global.h +KERNVIRTADDR opt_global.h +PHYSADDR opt_global.h +SOFTFLOAT opt_global.h + +TARGET_OCTEON opt_global.h +TARGET_EMULATOR opt_ddb.h + +TICK_USE_YAMON_FREQ opt_global.h +TICK_USE_MALTA_RTC opt_global.h |