summaryrefslogtreecommitdiffstats
path: root/sys/conf/NOTES
diff options
context:
space:
mode:
Diffstat (limited to 'sys/conf/NOTES')
-rw-r--r--sys/conf/NOTES203
1 files changed, 203 insertions, 0 deletions
diff --git a/sys/conf/NOTES b/sys/conf/NOTES
new file mode 100644
index 0000000..75ff641
--- /dev/null
+++ b/sys/conf/NOTES
@@ -0,0 +1,203 @@
+#
+# LINT -- config file for checking all the sources, tries to pull in
+# as much of the source tree as it can.
+#
+# This kernel is NOT MEANT to be runnable!
+#
+# $Id: LINT,v 1.71 1994/05/18 16:23:25 jkh Exp $
+#
+
+machine "i386"
+cpu "I386_CPU"
+cpu "I486_CPU"
+ident LINT
+timezone 8 dst
+maxusers 10
+maxfdescs 2048 #Max file descriptors per process
+options MATH_EMULATE #Support for x87 emulation
+
+# Do not use in binary distributions
+#options GPL_MATH_EMULATE #Support for x87 emualtion via
+ #new math emulator
+
+config "386bsd" root on wd0 swap on wd0 and sd0 dumps on wd0
+
+#
+# options that appear as inline #ifdef's
+#
+options "COM_BIDIR" #Bidirectional support in sys/isa/sio.c
+options "COM_MULTIPORT" #Multiport support in sys/isa/sio.c
+options "FIFO_TRIGGER=FIFO_TRIGGER_1" #Use this fifo value in sio.c
+
+options "COMPAT_43" #compatible with BSD 4.3
+options "SYMTAB_SPACE=113498" #This kernel needs LOTS of symtable
+options GATEWAY #internetwork gateway
+options KTRACE #kernel tracing
+
+options "NCONS=8" #number of syscons virtual consoles
+options "FAT_CURSOR" #block cursor in syscons or pccons
+options "STAR_SAVER" #syscons "stars" screen saver
+options "FADE_SAVER" #syscons "fade" screen saver
+options "SNAKE_SAVER" #syscons "snake" screen saver
+options "BLANK_SAVER" #syscons "blank" screen saver
+
+#options ALLOW_CONFLICT_IOADDR #no IO addr conflict checks (PS/2 mice)
+#options ALLOW_CONFLICT_IRQ #no IRQ conflict checks (mport serial)
+
+options "TCP_COMPAT_42" #tcp/ip compatible with 4.2
+ # ^^^ NOT RECOMMENDED FOR NORMAL USE
+options UCONSOLE #x console support
+options XSERVER #xserver
+options DECBIT #here because clnp.h wanted it here
+ #support for CLNP ``congestion
+ #experienced'' bit in ISO-TP
+options TROLL #CLNP network error simulator
+options ICMPPRINTFS #ICMP packet dump by printf()
+options NSERRPRINTFS #ditto for XNS Error protocol
+ #^^above three NOT RECOMMENTED
+options FASTLINKS #support for fast symbolic links
+options MACHVMCOMPAT #support for Mach-style vm calls
+options IPBROADCASTECHO=1 #send reply to broadcast pings
+options IPMASKAGENT=1 #send reply to icmp mask requests
+options TPCONS #support X.25 network-layer service
+options USER_LDT #allow user-level control of i386 ldt
+
+# See /sys/i386/doc/sound.doc for information about EXCLUDE options for
+# the sound drivers.
+
+# Multicast support.
+options MULTICAST # Multicast code
+options MROUTING # Multicast routing
+
+#
+# options that are in sys/conf/files
+#
+pseudo-device bpfilter 4 #berkeley packet filter
+options CCITT
+device cd0 #Only need one of these, the code dynamically grows
+device ch0
+pseudo-device ddb
+pseudo-device devpager
+options EON
+pseudo-device ether
+options FIFO
+#pseudo-device imp
+options INET #Internet communications protocols
+options ISO
+options ISOFS #ISO 9660 File System
+pseudo-device loop
+options MFS #Memory File System
+options NFS #Network File System
+options NS #Xerox NS communications protocols
+options NSIP #XNS over IP
+options PCFS #PC (MSDOS) File System
+pseudo-device ppp 2
+pseudo-device pty 4
+options QUOTA #enable disk quotas
+options RMP #HP remote maint protocol
+controller scbus0
+device sd0
+device sd1
+device sd2
+device sd3
+pseudo-device sl 2
+device st0
+device st1
+pseudo-device swappager
+options SYSVSHM
+options "SHMMAXPGS=64" # 256Kb of sharable memory
+options SYSVSEM
+options SYSVMSG
+#pseudo-device tb #tablet line discipline.
+options TPIP # ISO TP class 4 over IP
+#pseudo-device tun
+device uk0 #unknown scsi devices
+pseudo-device vnodepager
+
+#
+# options that are in sys/i386/conf/files.i386
+#
+#This is needed here so the isa? below will work
+controller isa0
+
+# driver for the Adaptec 154x SCSI cards.
+controller aha0 at isa? port "IO_AHA0" bio irq 11 drq 5 vector ahaintr
+# driver for the Adaptec 174x SCSI cards.
+controller ahb0 at isa? bio irq 11 vector ahbintr
+# driver for the Bustek 742.
+controller bt0 at isa? port "IO_BT0" bio irq 12 vector btintr
+# driver for the Seagate ST01/ST02 card, not yet finished.
+#controller sg0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector sgintr
+controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
+disk fd0 at fdc0 drive 0
+disk fd1 at fdc0 drive 1
+tape ft0 at fdc0 drive 2
+
+# driver for the Western Digital and SMCC WD80xx cards, for the Novell
+# NE1000/2000 card and the 3COM 3C503 card.
+device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
+# driver for the AT&T Starlan card.
+device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
+#driver for the Isolan AT 4114-0 and the Isolink 4110 ethernet card.
+device is0 at isa? port 0x280 net irq 10 drq 7 vector isintr
+#device ix0 at isa? port 0x320 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
+# driver for the Etherlink III ( 3C509 ) card, beta version.
+device ep0 at isa? port 0x300 net irq 10 vector epintr
+#driver for the 3c501
+device el0 at isa? port 0x300 net irq 9 vector elintr
+
+#special cased above:
+#controller isa0
+# interruptless parallel printer port driver
+device lpa0 at isa? port "IO_LPT1" tty
+device lpa1 at isa? port "IO_LPT2" tty
+# interrupt driven parallel printer port driver
+device lpt0 at isa? port "IO_LPT3" tty irq 7 vector lptintr
+# Driver for Mitsumi CD-ROM players
+device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
+# Driver for Logitech and ATI inport bus mice
+device mse0 at isa? port 0x23c tty irq 5 vector mseintr
+device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
+# Driver for ProAudioSpectrum SCSI, on cards with NCR 5380 chips.
+# The four units correspond to the HW-jumpers. No intr, No DMA, very slow.
+device pas0 at isa? port 0x1f88
+device pas1 at isa? port 0x1f84
+device pas2 at isa? port 0x1f8c
+device pas3 at isa? port 0x1e88
+device pc0 at isa? port "IO_KBD" tty irq 1 vector pcrint
+#only one of pc0 or sc0 allowed
+#device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
+device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
+device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
+device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr
+device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr
+#PS/2 mouse driver (must follow pc0 or sc0 if enabled). Also enable
+#ALLOW_CONFLICT_IOADDR option (see above) if you want to use this.
+#device psm0 at isa? port "IO_KBD" tty irq 12 vector psmintr
+
+pseudo-device speaker
+#tw device-driver
+controller uha0 at isa? port "IO_UHA0" bio irq 14 drq 5 vector uhaintr
+controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
+disk wd0 at wdc0 drive 0
+disk wd1 at wdc0 drive 1
+controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
+disk wd2 at wdc1 drive 0
+disk wd3 at wdc1 drive 1
+device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
+
+# Various sound card drivers.
+# See /sys/doc/sound.doc for more information.
+device snd5 at isa? port 0x330 irq 6 vector mpuintr
+device snd4 at isa? port 0x220 irq 15 drq 6 vector gusintr
+device snd3 at isa? port 0x388 irq 10 drq 6 vector pasintr
+device snd2 at isa? port 0x220 irq 7 drq 1 vector sbintr
+device snd6 at isa? port 0x220 irq 7 drq 5 vector sbintr
+device snd7 at isa? port 0x300
+device snd1 at isa? port 0x388
+
+# The digital speaker driver (/dev/pcaudio).
+device pca0 at isa? tty
+
+# options that have not been resolved yet
+pseudo-device log
OpenPOWER on IntegriCloud