diff options
Diffstat (limited to 'sys/conf/NOTES')
-rw-r--r-- | sys/conf/NOTES | 116 |
1 files changed, 115 insertions, 1 deletions
diff --git a/sys/conf/NOTES b/sys/conf/NOTES index 6730a07..ba4d97b 100644 --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -2,7 +2,7 @@ # LINT -- config file for checking all the sources, tries to pull in # as much of the source tree as it can. # -# $Id: LINT,v 1.519 1998/12/27 14:21:08 sos Exp $ +# $Id: LINT,v 1.520 1998/12/27 19:51:34 phk Exp $ # # NB: You probably don't want to try running a kernel built from this # file. Instead, you should start from GENERIC, and add options from @@ -1533,7 +1533,121 @@ device iicsmb0 at iicbus? controller pcf0 at isa? port 0x320 net irq 5 +# ISDN4BSD section + +# i4b passive ISDN cards support (isic - I4b Siemens Isdn Chipset driver) +# note that the ``options'' and ``device'' lines must BOTH be defined ! +# +# Non-PnP Cards: +# -------------- +# +# Teles S0/8 or Niccy 1008 +options "TEL_S0_8" +#device isic0 at isa? iomem 0xd0000 net irq 5 flags 1 vector isicintr +# +# Teles S0/16 or Creatix ISDN-S0 or Niccy 1016 +options "TEL_S0_16" +#device isic0 at isa? port 0xd80 iomem 0xd0000 net irq 5 flags 2 vector isicintr +# +# Teles S0/16.3 +options "TEL_S0_16_3" +#device isic0 at isa? port 0xd80 net irq 5 flags 3 vector isicintr +# +# AVM A1 or AVM Fritz!Card +options "AVM_A1" +#device isic0 at isa? port 0x340 net irq 5 flags 4 vector isicintr +# +# USRobotics Sportster ISDN TA intern +options "USR_STI" +#device isic0 at isa? port 0x268 net irq 5 flags 7 vector isicintr +# +# ITK ix1 Micro +options "ITKIX1" +#device isic0 at isa? port 0x398 net irq 10 flags 18 vector isicintr +# +# PnP-Cards: +# ---------- +# +# Teles S0/16.3 PnP +options "TEL_S0_16_3_P" +#device isic0 at isa? port ? net irq ? vector isicintr +# +# Creatix ISDN-S0 P&P +options "CRTX_S0_P" +#device isic0 at isa? port ? net irq ? vector isicintr +# +# Dr. Neuhaus Niccy Go@ +options "DRN_NGO" +#device isic0 at isa? port ? net irq ? vector isicintr +# +# Sedlbauer Win Speed +options "SEDLBAUER" +#device isic0 at isa? port ? net irq ? vector isicintr +# +# Dynalink IS64PH +options "DYNALINK" +#device isic0 at isa? port ? net irq ? vector isicintr +# +# ELSA QuickStep 1000pro ISA +options "ELSA_QS1ISA" +#device isic0 at isa? port ? net irq ? vector isicintr +# +# PCI-Cards: +# ---------- +# +# ELSA QuickStep 1000pro PCI +options "ELSA_QS1PCI" +#device isic0 # +# PCMCIA-Cards: +# ------------- +# +# AVM PCMCIA Fritz!Card +options "AVM_A1_PCMCIA" +device isic0 at isa? port 0x340 net irq 5 flags 10 vector isicintr +# +# Active Cards: +# ------------- +# +# Stollmann Tina-dd control device +device tina0 at isa? port 0x260 net irq 10 vector tinaintr +# +# ISDN Protocol Stack +# ------------------- +# +# Q.921 / layer 2 - i4b passive cards D channel handling +pseudo-device "i4bq921" +# +# Q.931 / layer 3 - i4b passive cards D channel handling +pseudo-device "i4bq931" +# +# layer 4 - i4b common passive and active card handling +pseudo-device "i4b" +# +# ISDN devices +# ------------ +# +# userland driver to do ISDN tracing (for passive cards only) +pseudo-device "i4btrc" 4 +# +# userland driver to control the whole thing +pseudo-device "i4bctl" +# +# userland driver for access to raw B channel +pseudo-device "i4brbch" 4 +# +# userland driver for telephony +pseudo-device "i4btel" 2 +# +# network driver for IP over raw HDLC ISDN +pseudo-device "i4bipr" 4 +# enable VJ header compression detection for ipr i/f +options IPR_VJ +# +# network driver for sync PPP over ISDN +pseudo-device "i4bisppp" 4 + + # Parallel-Port Bus # # Parallel port bus support is provided by the `ppbus' device. |