diff options
Diffstat (limited to 'sys/conf/NOTES')
-rw-r--r-- | sys/conf/NOTES | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/sys/conf/NOTES b/sys/conf/NOTES index 06af805..f03279a 100644 --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -1049,6 +1049,62 @@ options MSGBUF_SIZE=40960 # Mandatory devices: # +# The keyboard controller; it controls the keyboard and the PS/2 mouse. +device atkbdc +hint.atkbdc.0.at="isa" +hint.atkbdc.0.port="0x060" + +# The AT keyboard +device atkbd +hint.atkbd.0.at="atkbdc" +hint.atkbd.0.irq="1" + +# Options for atkbd: +options ATKBD_DFLT_KEYMAP # specify the built-in keymap +makeoptions ATKBD_DFLT_KEYMAP=jp.106 + +# These options are valid for other keyboard drivers as well. +options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap +options KBD_INSTALL_CDEV # install a CDEV entry in /dev + +# `flags' for atkbd: +# 0x01 Force detection of keyboard, else we always assume a keyboard +# 0x02 Don't reset keyboard, useful for some newer ThinkPads +# 0x03 Force detection and avoid reset, might help with certain +# dockingstations +# 0x04 Old-style (XT) keyboard support, useful for older ThinkPads + +# PS/2 mouse +device psm +hint.psm.0.at="atkbdc" +hint.psm.0.irq="12" + +# Options for psm: +options PSM_HOOKRESUME #hook the system resume event, useful + #for some laptops +options PSM_RESETAFTERSUSPEND #reset the device at the resume event + +# Video card driver for VGA adapters. +device vga +hint.vga.0.at="isa" + +# Options for vga: +# Try the following option if the mouse pointer is not drawn correctly +# or font does not seem to be loaded properly. May cause flicker on +# some systems. +options VGA_ALT_SEQACCESS + +# If you can dispense with some vga driver features, you may want to +# use the following options to save some memory. +#options VGA_NO_FONT_LOADING # don't save/load font +#options VGA_NO_MODE_CHANGE # don't change video modes + +# Older video cards may require this option for proper operation. +options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs + +# The following option probably won't work with the LCD displays. +options VGA_WIDTH90 # support 90 column modes + options FB_DEBUG # Frame buffer debugging device splash # Splash screen and screen saver support @@ -1113,6 +1169,7 @@ options SC_NO_SUSPEND_VTYSWITCH # # adv: All Narrow SCSI bus AdvanSys controllers. # adw: Second Generation AdvanSys controllers including the ADV940UW. +# aha: Adaptec 154x/1535/1640 # ahb: Adaptec 174x EISA controllers # ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/ # 19160x/29160x, aic7770/aic78xx @@ -1120,6 +1177,8 @@ options SC_NO_SUSPEND_VTYSWITCH # aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS) # amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices # such as the Tekram DC-390(T). +# bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x, +# BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F # isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters, # ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2, # ISP 12160 Ultra3 SCSI, @@ -1134,10 +1193,20 @@ options SC_NO_SUSPEND_VTYSWITCH # 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D, # 53C1010-33, 53C1010-66. # trm: Tekram DC395U/UW/F DC315U adapters. +# wds: WD7000 +# +# Note that the order is important in order for Buslogic ISA/EISA cards to be +# probed correctly. +# +device bt +hint.bt.0.at="isa" +hint.bt.0.port="0x330" device adv hint.adv.0.at="isa" device adw +device aha +hint.aha.0.at="isa" device aic hint.aic.0.at="isa" device ahb @@ -1165,6 +1234,11 @@ device mpt device ncr device sym device trm +device wds +hint.wds.0.at="isa" +hint.wds.0.port="0x350" +hint.wds.0.irq="11" +hint.wds.0.drq="6" # The aic7xxx driver will attempt to use memory mapped I/O for all PCI # controllers that have it configured only if this option is set. Unfortunately, @@ -1211,6 +1285,84 @@ options ISP_TARGET_MODE=1 #options SYM_SETUP_MAX_LUN #-Number of LUNs supported # default:8, range:[1..64] +# The 'asr' driver provides support for current DPT/Adaptec SCSI RAID +# controllers (SmartRAID V and VI and later). +# These controllers require the CAM infrastructure. +# +device asr + +# The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/). +# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O. +# The DPT controllers are commonly re-licensed under other brand-names - +# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and +# Compaq are actually DPT controllers. +# +# See src/sys/dev/dpt for debugging and other subtle options. +# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various +# instruments are enabled. The tools in +# /usr/sbin/dpt_* assume these to be enabled. +# DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT. +# If you ant the driver to handle timeouts, enable +# this option. If your system is very busy, this +# option will create more trouble than solve. +# DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to +# wait when timing out with the above option. +# DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h +# DPT_LOST_IRQ When enabled, will try, once per second, to catch +# any interrupt that got lost. Seems to help in some +# DPT-firmware/Motherboard combinations. Minimal +# cost, great benefit. +# DPT_RESET_HBA Make "reset" actually reset the controller +# instead of fudging it. Only enable this if you +# are 100% certain you need it. + +device dpt + +# DPT options +#!CAM# options DPT_MEASURE_PERFORMANCE +#!CAM# options DPT_HANDLE_TIMEOUTS +options DPT_TIMEOUT_FACTOR=4 +options DPT_LOST_IRQ +options DPT_RESET_HBA +options DPT_ALLOW_MEMIO + +# +# Compaq "CISS" RAID controllers (SmartRAID 5* series) +# These controllers have a SCSI-like interface, and require the +# CAM infrastructure. +# +device ciss + +# +# Intel Integrated RAID controllers. +# This driver was developed and is maintained by Intel. Contacts +# at Intel for this driver are +# "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com> and +# "Leubner, Achim" <achim.leubner@intel.com>. +# +device iir + +# +# Mylex AcceleRAID and eXtremeRAID controllers with v6 and later +# firmware. These controllers have a SCSI-like interface, and require +# the CAM infrastructure. +# +device mly + +# +# Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only +# one entry is needed; the code will find and configure all supported +# controllers. +# +device ida # Compaq Smart RAID +device mlx # Mylex DAC960 +device amr # AMI MegaRAID + +# +# 3ware ATA RAID +# +device twe # 3ware ATA RAID + # # The 'ATA' driver supports all ATA and ATAPI devices, including PC Card # devices. You only need one "device ata" for it to find all @@ -1756,6 +1908,34 @@ device meteor 1 device bktr # +# PC Card/PCMCIA +# (OLDCARD) +# +# card: pccard slots +# pcic: isa/pccard bridge +#device pcic +#hint.pcic.0.at="isa" +#hint.pcic.1.at="isa" +#device card 1 + +# +# PC Card/PCMCIA and Cardbus +# (NEWCARD) +# +# Note that NEWCARD and OLDCARD are incompatible. Do not use both at the same +# time. +# +# pccbb: pci/cardbus bridge implementing YENTA interface +# pccard: pccard slots +# cardbus: cardbus slots +device cbb +device pccard +device cardbus +#device pcic ISA attachment currently busted +#hint.pcic.0.at="isa" +#hint.pcic.1.at="isa" + +# # SMB bus # # System Management Bus support is provided by the 'smbus' device. @@ -2118,3 +2298,6 @@ options MAXFILES=999 options METEOR_TEST_VIDEO options NDEVFSINO=1025 options NDEVFSOVERFLOW=32769 + +# Yet more undocumented options for linting. +options VGA_DEBUG |