diff options
Diffstat (limited to 'sys/conf/NOTES')
-rw-r--r-- | sys/conf/NOTES | 21 |
1 files changed, 20 insertions, 1 deletions
diff --git a/sys/conf/NOTES b/sys/conf/NOTES index e470f53..669dcff 100644 --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -2,7 +2,7 @@ # LINT -- config file for checking all the sources, tries to pull in # as much of the source tree as it can. # -# $Id: LINT,v 1.363 1997/09/09 12:40:53 jmg Exp $ +# $Id: LINT,v 1.364 1997/09/10 03:07:13 peter Exp $ # # NB: You probably don't want to try running a kernel built from this # file. Instead, you should start from GENERIC, and add options from @@ -950,6 +950,22 @@ options NATM #native ATM # i386/isa/sound/sound_config.h. If you change the values here, you # must also change the values in the include file. # +# pcm: PCM audio through various sound cards. +# +# This is the work in progress from Luigi Rizzo. This has support for +# CS423x based cards, OPTi931, SB16 PnP, GusPnP. For more information +# about this driver, take a look at sys/i386/isa/snd/README. +# +# The flags of the device tells the device a bit more info about the +# device that normally is obtained through the PnP interface. +# bit 2..0 secondary DMA channel; +# bit 4 set if the board uses two dma channels; +# bit 15..8 board type, overrides autodetection; leave it +# zero if don't know what to put in (and you don't, +# since this is unsupported at the moment...). +# +# This driver will use the new PnP code if it's available. +# # pca: PCM audio through your PC speaker # # If you don't have a lpt0 device at IRQ 7, you can remove the @@ -989,6 +1005,9 @@ device uart0 at isa? port 0x330 irq 5 vector "m6850intr" #device sscape0 at isa? port 0x330 irq 6 drq 0 #device trix0 at isa? port 0x330 irq 6 drq 0 vector sscapeintr +# Luigi's snd code +# device pcm0 at isa? port ? tty irq 10 drq 1 flags 0x0 vector pcmintr + # Not controlled by `snd' device pca0 at isa? port IO_TIMER1 tty |