diff options
Diffstat (limited to 'sys/conf/Makefile.ia64')
| -rw-r--r-- | sys/conf/Makefile.ia64 | 340 |
1 files changed, 340 insertions, 0 deletions
diff --git a/sys/conf/Makefile.ia64 b/sys/conf/Makefile.ia64 new file mode 100644 index 0000000..c75c199 --- /dev/null +++ b/sys/conf/Makefile.ia64 @@ -0,0 +1,340 @@ +# Makefile.ia64 -- with config changes. +# Copyright 1990 W. Jolitz +# from: src/sys/conf/Makefile.alpha,v 1.76 +# $FreeBSD$ +# +# Makefile for FreeBSD +# +# This makefile is constructed from a machine description: +# config machineid +# Most changes should be made in the machine description +# /sys/alpha/conf/``machineid'' +# after which you should do +# config machineid +# Generic makefile changes should be made in +# /sys/alpha/conf/Makefile.alpha +# after which config should be rerun for all machines. +# + +# The Linux cross tools don't understand -fformat-extensions +CWARNFLAGS= -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes \ + -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual \ + -ansi +CC= ia64-unknown-linux-gcc -D__FreeBSD__ -U__linux__ +LD= ia64-unknown-linux-ld +SIZE= ia64-unknown-linux-size +OBJCOPY= ia64-unknown-linux-objcopy +MACHINE_ARCH= ia64 + +# Which version of config(8) is required. +%VERSREQ= 500003 + +# Can be overridden by makeoptions or /etc/make.conf +KERNEL_KO?= kernel +KERNEL?= kernel +KODIR?= /boot/${KERNEL} +STD8X16FONT?= iso + +.if !defined(S) +.if exists(./@/.) +S= ./@ +.else +S= ../.. +.endif +.endif +M= ${MACHINE_ARCH} + +SIZE?= size +OBJCOPY?= objcopy + +COPTFLAGS?=-O +INCLUDES= -nostdinc -I- -I. -I$S +# This hack is to allow kernel compiles to succeed on machines w/out srcdist +.if exists($S/../include) +INCLUDES+= -I$S/../include +.else +INCLUDES+= -I/usr/include +.endif +COPTS= ${INCLUDES} ${IDENT} -D_KERNEL -include opt_global.h +CFLAGS= ${COPTFLAGS} ${CWARNFLAGS} ${DEBUG} ${COPTS} + +# XXX LOCORE means "don't declare C stuff" not "for locore.s". +ASM_CFLAGS= -x assembler-with-cpp -Wa,-x -DLOCORE ${CFLAGS} + +# Select the correct set of tools. Can't set OBJFORMAT here because it +# doesn't get exported into the environment, and if it were exported +# then it might break building of utilities. +#FMT= -elf +CFLAGS+= ${FMT} + +DEFINED_PROF= ${PROF} +.if defined(PROF) +CFLAGS+= -malign-functions=4 +.if ${PROFLEVEL} >= 2 +IDENT+= -DGPROF4 -DGUPROF +PROF+= -mprofiler-epilogue +.endif +.endif + +# Put configuration-specific C flags last (except for ${PROF}) so that they +# can override the others. +CFLAGS+= ${CONF_CFLAGS} + +NORMAL_C= ${CC} -c ${CFLAGS} ${PROF} ${.IMPSRC} +NORMAL_C_C= ${CC} -c ${CFLAGS} ${PROF} ${.IMPSRC} +NORMAL_S= ${CC} -c ${ASM_CFLAGS} ${.IMPSRC} +PROFILE_C= ${CC} -c ${CFLAGS} ${.IMPSRC} + +NORMAL_M= perl5 $S/kern/makeobjops.pl -c $<; \ + ${CC} -c ${CFLAGS} ${PROF} ${.PREFIX}.c + +GEN_CFILES= $S/$M/$M/genassym.c +# setdef0.c and setdef1.c are intentionally +# omitted from SYSTEM_CFILES. They include setdefs.h, a header which +# is generated from all of ${OBJS}. We don't want to have to compile +# everything just to do a make depend. +SYSTEM_CFILES= param.c vnode_if.c hints.c config.c +SYSTEM_SFILES= $S/$M/$M/locore.s +SYSTEM_DEP= Makefile ${SYSTEM_OBJS} +SYSTEM_OBJS= locore.o setdef0.o vnode_if.o ${OBJS} param.o hints.o config.o \ + setdef1.o # hack.So ski can't cope with dynamic relocs +SYSTEM_LD= @${LD} ${FMT} -Bdynamic -T $S/conf/ldscript.$M \ + -e locorestart \ + -export-dynamic -dynamic-linker /red/herring \ + -o ${.TARGET} -X ${SYSTEM_OBJS} vers.o +SYSTEM_LD_TAIL= @${OBJCOPY} --strip-symbol gcc2_compiled. ${.TARGET} ; \ + ${SIZE} ${FMT} ${.TARGET} ; chmod 755 ${.TARGET} +SYSTEM_DEP+= $S/conf/ldscript.$M + +%BEFORE_DEPEND + +%OBJS + +%CFILES + +%SFILES + +%MFILES + +%CLEAN + +.PHONY: all modules +all: ${KERNEL_KO} + +depend: kernel-depend +clean: kernel-clean +cleandepend: kernel-cleandepend +tags: kernel-tags +install install.debug: kernel-install +reinstall reinstall.debug: kernel-reinstall + +.if !defined(DEBUG) +FULLKERNEL= ${KERNEL_KO} +.else +FULLKERNEL= ${KERNEL_KO}.debug +${KERNEL_KO}: ${FULLKERNEL} + ${OBJCOPY} --strip-debug ${FULLKERNEL} ${KERNEL_KO} +.endif + +${FULLKERNEL}: ${SYSTEM_DEP} vers.o + @rm -f ${.TARGET} + @echo linking ${.TARGET} + ${SYSTEM_LD} + ${SYSTEM_LD_TAIL} + +.if !exists(.depend) +${SYSTEM_OBJS}: vnode_if.h ${BEFORE_DEPEND:M*.h} ${MFILES:T:S/.m$/.h/} +.endif + +.for mfile in ${MFILES} +${mfile:T:S/.m$/.h/}: ${mfile} + perl5 $S/kern/makeobjops.pl -h ${mfile} +.endfor + +kernel-clean: + rm -f *.o *.so *.So *.ko *.s eddep errs \ + ${FULLKERNEL} ${KERNEL_KO} linterrs makelinks param.c \ + setdef[01].c setdefs.h tags \ + vers.c vnode_if.c vnode_if.h \ + ${MFILES:T:S/.m$/.c/} ${MFILES:T:S/.m$/.h/} \ + ${CLEAN} + +#lint: /tmp param.c +# @lint -hbxn -DGENERIC -Dvolatile= ${COPTS} \ +# $S/$M/$M/Locore.c ${CFILES} param.c | \ +# grep -v 'struct/union .* never defined' | \ +# grep -v 'possible pointer alignment problem' + +locore.o: $S/$M/$M/locore.s assym.s + ${NORMAL_S} + +# This is a hack. BFD "optimizes" away dynamic mode if there are no +# dynamic references. We could probably do a '-Bforcedynamic' mode like +# in the a.out ld. For now, this works. +hack.So: Makefile + touch hack.c + ${CC} ${FMT} -shared -nostdlib hack.c -o hack.So + rm -f hack.c + +.ORDER: setdefs.h setdef0.c setdef1.c + +setdef0.o: setdef0.c setdefs.h + ${NORMAL_C} + +setdef1.o: setdef1.c setdefs.h + ${NORMAL_C} + +setdef0.c setdef1.c setdefs.h: Makefile ${OBJS} + @./gensetdefs ${OBJS} + +# this rule stops ./assym.s in .depend from causing problems +./assym.s: assym.s + +assym.s: $S/$M/$M/genassym.sh genassym.o + sh $S/$M/$M/genassym.sh genassym.o > ${.TARGET} + +genassym.o: $S/$M/$M/genassym.c + ${CC} -c ${CFLAGS} $S/$M/$M/genassym.c + +${SYSTEM_OBJS} genassym.o vers.o: opt_global.h + +kernel-depend: assym.s param.c vnode_if.h ${BEFORE_DEPEND} \ + ${CFILES} ${SYSTEM_CFILES} ${GEN_CFILES} ${SFILES} \ + ${SYSTEM_SFILES} ${MFILES:T:S/.m$/.h/} + rm -f .newdep + CC="${CC}" mkdep -a -f .newdep ${CFLAGS} ${CFILES} ${SYSTEM_CFILES} ${GEN_CFILES} + env MKDEP_CPP="${CC} -E" \ + mkdep -a -f .newdep ${ASM_CFLAGS} ${SFILES} ${SYSTEM_SFILES} + rm -f .depend + mv -f .newdep .depend + +kernel-cleandepend: + rm -f .depend + +links: + egrep '#if' ${CFILES} | sed -f $S/conf/defines | \ + sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink + echo ${CFILES} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \ + sort -u | comm -23 - dontlink | \ + sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks + sh makelinks && rm -f dontlink + +kernel-tags: + @[ -f .depend ] || { echo "you must make depend first"; exit 1; } + sh $S/conf/systags.sh + rm -f tags1 + sed -e 's, ../, ,' tags > tags1 + +kernel-install kernel-install.debug: +.if exists(${DESTDIR}/boot) + @if [ ! -f ${DESTDIR}/boot/device.hints ] ; then \ + echo "You must set up a ${DESTDIR}/boot/device.hints file first." ; \ + exit 1 ; \ + fi + @if [ x"`grep device.hints ${DESTDIR}/boot/defaults/loader.conf ${DESTDIR}/boot/loader.conf`" = "x" ]; then \ + echo "You must activate /boot/device.hints in loader.conf." ; \ + exit 1 ; \ + fi +.endif + @if [ ! -f ${KERNEL_KO}${.TARGET:S/kernel-install//} ] ; then \ + echo "You must build a kernel first." ; \ + exit 1 ; \ + fi +.if exists(${DESTDIR}${KODIR}) +.if exists(${DESTDIR}${KODIR}.old) + @-chflags -R noschg ${DESTDIR}${KODIR}.old + -rm -rf ${DESTDIR}${KODIR}.old +.endif + mv ${DESTDIR}${KODIR} ${DESTDIR}${KODIR}.old +.endif + mkdir -p ${DESTDIR}${KODIR} + @if [ -f ${DESTDIR}${KODIR}/${KERNEL_KO} ] ; then \ + chflags noschg ${DESTDIR}${KODIR}/${KERNEL_KO} ; \ + fi + install -c -m 555 -o root -g wheel -fschg \ + ${KERNEL_KO}${.TARGET:S/kernel-install//} ${DESTDIR}${KODIR} + +kernel-reinstall kernel-reinstall.debug: + @if [ -f ${DESTDIR}${KODIR}/${KERNEL_KO} ] ; then \ + chflags noschg ${DESTDIR}${KODIR}/${KERNEL_KO} ; \ + fi + install -c -m 555 -o root -g wheel -fschg \ + ${KERNEL_KO}${.TARGET:S/kernel-reinstall//} ${DESTDIR}${KODIR} + +.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists($S/modules) +all: modules +depend: modules-depend +clean: modules-clean +cleandepend: modules-cleandepend +tags: modules-tags +install install.debug: modules-install +reinstall reinstall.debug: modules-reinstall +.endif + +MKMODULESENV= MAKEOBJDIRPREFIX=${.OBJDIR}/modules KMODDIR=${DESTDIR}${KODIR} + +modules: + @mkdir -p ${.OBJDIR}/modules + cd $S/modules && env ${MKMODULESENV} ${MAKE} obj all + +modules-depend: + @mkdir -p ${.OBJDIR}/modules + cd $S/modules && env ${MKMODULESENV} ${MAKE} obj depend + +modules-clean: + cd $S/modules && env ${MKMODULESENV} ${MAKE} clean + +modules-cleandepend: + cd $S/modules && env ${MKMODULESENV} ${MAKE} cleandepend + +modules-cleandir: + cd $S/modules && env ${MKMODULESENV} ${MAKE} cleandir + +modules-tags: + cd $S/modules && env ${MKMODULESENV} ${MAKE} tags + +modules-install modules-install.debug: + cd $S/modules && env ${MKMODULESENV} ${MAKE} install + +modules-reinstall modules-reinstall.debug: + cd $S/modules && env ${MKMODULESENV} ${MAKE} install + +config.o: + ${NORMAL_C} + +param.c: $S/conf/param.c + -rm -f param.c + cp $S/conf/param.c . + +param.o: + ${NORMAL_C} + +vers.c: $S/conf/newvers.sh $S/sys/param.h ${SYSTEM_DEP} + sh $S/conf/newvers.sh ${KERN_IDENT} ${IDENT} + +# XXX strictly, everything depends on Makefile because changes to ${PROF} +# only appear there, but we don't handle that. +vers.o: + ${NORMAL_C} + +hints.o: hints.c + ${NORMAL_C} + +vnode_if.c: $S/kern/vnode_if.pl $S/kern/vnode_if.src + perl5 $S/kern/vnode_if.pl -c $S/kern/vnode_if.src + +vnode_if.h: $S/kern/vnode_if.pl $S/kern/vnode_if.src + perl5 $S/kern/vnode_if.pl -h $S/kern/vnode_if.src + +vnode_if.o: + ${NORMAL_C} + +.if exists($S/../share/mk) +.include "$S/../share/mk/bsd.kern.mk" +.else +.include <bsd.kern.mk> +.endif + +%RULES + +# DO NOT DELETE THIS LINE -- make depend uses it |
