1 files changed, 287 insertions, 0 deletions
diff --git a/sys/cddl/contrib/opensolaris/common/zfs/zfs_namecheck.c b/sys/cddl/contrib/opensolaris/common/zfs/zfs_namecheck.c
new file mode 100644
index 0000000..2004d86
--- /dev/null
+++ b/sys/cddl/contrib/opensolaris/common/zfs/zfs_namecheck.c
@@ -0,0 +1,287 @@
+/*
+ * CDDL HEADER START
+ *
+ * The contents of this file are subject to the terms of the
+ * Common Development and Distribution License (the "License").
+ * You may not use this file except in compliance with the License.
+ *
+ * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+ * or http://www.opensolaris.org/os/licensing.
+ * See the License for the specific language governing permissions
+ * and limitations under the License.
+ *
+ * When distributing Covered Code, include this CDDL HEADER in each
+ * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+ * If applicable, add the following below this CDDL HEADER, with the
+ * fields enclosed by brackets "[]" replaced with your own identifying
+ * information: Portions Copyright [yyyy] [name of copyright owner]
+ *
+ * CDDL HEADER END
+ */
+/*
+ * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
+ * Use is subject to license terms.
+ */
+
+#pragma ident	"%Z%%M%	%I%	%E% SMI"
+
+/*
+ * Common name validation routines for ZFS.  These routines are shared by the
+ * userland code as well as the ioctl() layer to ensure that we don't
+ * inadvertently expose a hole through direct ioctl()s that never gets tested.
+ * In userland, however, we want significantly more information about _why_ the
+ * name is invalid.  In the kernel, we only care whether it's valid or not.
+ * Each routine therefore takes a 'namecheck_err_t' which describes exactly why
+ * the name failed to validate.
+ *
+ * Each function returns 0 on success, -1 on error.
+ */
+
+#if defined(_KERNEL)
+#include <sys/systm.h>
+#else
+#include <string.h>
+#endif
+
+#include <sys/param.h>
+#include "zfs_namecheck.h"
+
+static int
+valid_char(char c)
+{
+	return ((c >= 'a' && c <= 'z') ||
+	    (c >= 'A' && c <= 'Z') ||
+	    (c >= '0' && c <= '9') ||
+	    c == '-' || c == '_' || c == '.' || c == ':');
+}
+
+/*
+ * Snapshot names must be made up of alphanumeric characters plus the following
+ * characters:
+ *
+ * 	[-_.:]
+ */
+int
+snapshot_namecheck(const char *path, namecheck_err_t *why, char *what)
+{
+	const char *loc;
+
+	if (strlen(path) >= MAXNAMELEN) {
+		if (why)
+			*why = NAME_ERR_TOOLONG;
+		return (-1);
+	}
+
+	if (path[0] == '\0') {
+		if (why)
+			*why = NAME_ERR_EMPTY_COMPONENT;
+		return (-1);
+	}
+
+	for (loc = path; *loc; loc++) {
+		if (!valid_char(*loc)) {
+			if (why) {
+				*why = NAME_ERR_INVALCHAR;
+				*what = *loc;
+			}
+			return (-1);
+		}
+	}
+	return (0);
+}
+
+/*
+ * Dataset names must be of the following form:
+ *
+ * 	[component][/]*[component][@component]
+ *
+ * Where each component is made up of alphanumeric characters plus the following
+ * characters:
+ *
+ * 	[-_.:]
+ */
+int
+dataset_namecheck(const char *path, namecheck_err_t *why, char *what)
+{
+	const char *loc, *end;
+	int found_snapshot;
+
+	/*
+	 * Make sure the name is not too long.
+	 *
+	 * ZFS_MAXNAMELEN is the maximum dataset length used in the userland
+	 * which is the same as MAXNAMELEN used in the kernel.
+	 * If ZFS_MAXNAMELEN value is changed, make sure to cleanup all
+	 * places using MAXNAMELEN.
+	 */
+	if (strlen(path) >= MAXNAMELEN) {
+		if (why)
+			*why = NAME_ERR_TOOLONG;
+		return (-1);
+	}
+
+	/* Explicitly check for a leading slash.  */
+	if (path[0] == '/') {
+		if (why)
+			*why = NAME_ERR_LEADING_SLASH;
+		return (-1);
+	}
+
+	if (path[0] == '\0') {
+		if (why)
+			*why = NAME_ERR_EMPTY_COMPONENT;
+		return (-1);
+	}
+
+	loc = path;
+	found_snapshot = 0;
+	for (;;) {
+		/* Find the end of this component */
+		end = loc;
+		while (*end != '/' && *end != '@' && *end != '\0')
+			end++;
+
+		if (*end == '\0' && end[-1] == '/') {
+			/* trailing slashes are not allowed */
+			if (why)
+				*why = NAME_ERR_TRAILING_SLASH;
+			return (-1);
+		}
+
+		/* Zero-length components are not allowed */
+		if (loc == end) {
+			if (why) {
+				/*
+				 * Make sure this is really a zero-length
+				 * component and not a '@@'.
+				 */
+				if (*end == '@' && found_snapshot) {
+					*why = NAME_ERR_MULTIPLE_AT;
+				} else {
+					*why = NAME_ERR_EMPTY_COMPONENT;
+				}
+			}
+
+			return (-1);
+		}
+
+		/* Validate the contents of this component */
+		while (loc != end) {
+			if (!valid_char(*loc)) {
+				if (why) {
+					*why = NAME_ERR_INVALCHAR;
+					*what = *loc;
+				}
+				return (-1);
+			}
+			loc++;
+		}
+
+		/* If we've reached the end of the string, we're OK */
+		if (*end == '\0')
+			return (0);
+
+		if (*end == '@') {
+			/*
+			 * If we've found an @ symbol, indicate that we're in
+			 * the snapshot component, and report a second '@'
+			 * character as an error.
+			 */
+			if (found_snapshot) {
+				if (why)
+					*why = NAME_ERR_MULTIPLE_AT;
+				return (-1);
+			}
+
+			found_snapshot = 1;
+		}
+
+		/*
+		 * If there is a '/' in a snapshot name
+		 * then report an error
+		 */
+		if (*end == '/' && found_snapshot) {
+			if (why)
+				*why = NAME_ERR_TRAILING_SLASH;
+			return (-1);
+		}
+
+		/* Update to the next component */
+		loc = end + 1;
+	}
+}
+
+/*
+ * For pool names, we have the same set of valid characters as described in
+ * dataset names, with the additional restriction that the pool name must begin
+ * with a letter.  The pool names 'raidz' and 'mirror' are also reserved names
+ * that cannot be used.
+ */
+int
+pool_namecheck(const char *pool, namecheck_err_t *why, char *what)
+{
+	const char *c;
+
+	/*
+	 * Make sure the name is not too long.
+	 *
+	 * ZPOOL_MAXNAMELEN is the maximum pool length used in the userland
+	 * which is the same as MAXNAMELEN used in the kernel.
+	 * If ZPOOL_MAXNAMELEN value is changed, make sure to cleanup all
+	 * places using MAXNAMELEN.
+	 */
+	if (strlen(pool) >= MAXNAMELEN) {
+		if (why)
+			*why = NAME_ERR_TOOLONG;
+		return (-1);
+	}
+
+	c = pool;
+	while (*c != '\0') {
+		if (!valid_char(*c)) {
+			if (why) {
+				*why = NAME_ERR_INVALCHAR;
+				*what = *c;
+			}
+			return (-1);
+		}
+		c++;
+	}
+
+	if (!(*pool >= 'a' && *pool <= 'z') &&
+	    !(*pool >= 'A' && *pool <= 'Z')) {
+		if (why)
+			*why = NAME_ERR_NOLETTER;
+		return (-1);
+	}
+
+	if (strcmp(pool, "mirror") == 0 || strcmp(pool, "raidz") == 0) {
+		if (why)
+			*why = NAME_ERR_RESERVED;
+		return (-1);
+	}
+
+	if (pool[0] == 'c' && (pool[1] >= '0' && pool[1] <= '9')) {
+		if (why)
+			*why = NAME_ERR_DISKLIKE;
+		return (-1);
+	}
+
+	return (0);
+}
+
+/*
+ * Check if the dataset name is private for internal usage.
+ * '$' is reserved for internal dataset names. e.g. "$MOS"
+ *
+ * Return 1 if the given name is used internally.
+ * Return 0 if it is not.
+ */
+int
+dataset_name_hidden(const char *name)
+{
+	if (strchr(name, '$') != NULL)
+		return (1);
+
+	return (0);
+}