summaryrefslogtreecommitdiffstats
path: root/sys/cam/ctl/ctl.h
diff options
context:
space:
mode:
Diffstat (limited to 'sys/cam/ctl/ctl.h')
-rw-r--r--sys/cam/ctl/ctl.h216
1 files changed, 216 insertions, 0 deletions
diff --git a/sys/cam/ctl/ctl.h b/sys/cam/ctl/ctl.h
new file mode 100644
index 0000000..0f7656f
--- /dev/null
+++ b/sys/cam/ctl/ctl.h
@@ -0,0 +1,216 @@
+/*-
+ * Copyright (c) 2003 Silicon Graphics International Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ * $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl.h#5 $
+ * $FreeBSD$
+ */
+/*
+ * Function definitions used both within CTL and potentially in various CTL
+ * clients.
+ *
+ * Author: Ken Merry <ken@FreeBSD.org>
+ */
+
+#ifndef _CTL_H_
+#define _CTL_H_
+
+#define ctl_min(x,y) (((x) < (y)) ? (x) : (y))
+#define CTL_RETVAL_COMPLETE 0
+#define CTL_RETVAL_QUEUED 1
+#define CTL_RETVAL_ALLOCATED 2
+#define CTL_RETVAL_ERROR 3
+
+typedef enum {
+ CTL_PORT_NONE = 0x00,
+ CTL_PORT_FC = 0x01,
+ CTL_PORT_SCSI = 0x02,
+ CTL_PORT_IOCTL = 0x04,
+ CTL_PORT_INTERNAL = 0x08,
+ CTL_PORT_ALL = 0xff,
+ CTL_PORT_ISC = 0x100 // FC port for inter-shelf communication
+} ctl_port_type;
+
+struct ctl_port_entry {
+ ctl_port_type port_type;
+ char port_name[64];
+ int32_t targ_port;
+ int physical_port;
+ int virtual_port;
+ u_int flags;
+#define CTL_PORT_WWNN_VALID 0x01
+#define CTL_PORT_WWPN_VALID 0x02
+ uint64_t wwnn;
+ uint64_t wwpn;
+ int online;
+};
+
+struct ctl_modepage_header {
+ uint8_t page_code;
+ uint8_t subpage;
+ int32_t len_used;
+ int32_t len_left;
+};
+
+struct ctl_modepage_aps {
+ struct ctl_modepage_header header;
+ uint8_t lock_active;
+};
+
+union ctl_modepage_info {
+ struct ctl_modepage_header header;
+ struct ctl_modepage_aps aps;
+};
+
+/*
+ * Serial number length, for VPD page 0x80.
+ */
+#define CTL_SN_LEN 16
+
+/*
+ * Device ID length, for VPD page 0x83.
+ */
+#define CTL_DEVID_LEN 16
+/*
+ * WWPN length, for VPD page 0x83.
+ */
+#define CTL_WWPN_LEN 8
+
+/*
+ * Unit attention types. ASC/ASCQ values for these should be placed in
+ * ctl_build_ua. These are also listed in order of reporting priority.
+ * i.e. a poweron UA is reported first, bus reset second, etc.
+ */
+typedef enum {
+ CTL_UA_NONE = 0x0000,
+ CTL_UA_POWERON = 0x0001,
+ CTL_UA_BUS_RESET = 0x0002,
+ CTL_UA_TARG_RESET = 0x0004,
+ CTL_UA_LUN_RESET = 0x0008,
+ CTL_UA_LUN_CHANGE = 0x0010,
+ CTL_UA_MODE_CHANGE = 0x0020,
+ CTL_UA_LOG_CHANGE = 0x0040,
+ CTL_UA_LVD = 0x0080,
+ CTL_UA_SE = 0x0100,
+ CTL_UA_RES_PREEMPT = 0x0200,
+ CTL_UA_RES_RELEASE = 0x0400,
+ CTL_UA_REG_PREEMPT = 0x0800,
+ CTL_UA_ASYM_ACC_CHANGE = 0x1000
+} ctl_ua_type;
+
+#ifdef _KERNEL
+
+MALLOC_DECLARE(M_CTL);
+
+typedef enum {
+ CTL_THREAD_NONE = 0x00,
+ CTL_THREAD_WAKEUP = 0x01
+} ctl_thread_flags;
+
+struct ctl_thread {
+ void (*thread_func)(void *arg);
+ void *arg;
+ struct cv wait_queue;
+ const char *thread_name;
+ ctl_thread_flags thread_flags;
+ struct completion *thread_event;
+ struct task_struct *task;
+};
+
+struct ctl_page_index;
+
+#ifdef SYSCTL_DECL /* from sysctl.h */
+SYSCTL_DECL(_kern_cam_ctl);
+#endif
+
+/*
+ * Call these routines to enable or disable front end ports.
+ */
+int ctl_port_enable(ctl_port_type port_type);
+int ctl_port_disable(ctl_port_type port_type);
+/*
+ * This routine grabs a list of frontend ports.
+ */
+int ctl_port_list(struct ctl_port_entry *entries, int num_entries_alloced,
+ int *num_entries_filled, int *num_entries_dropped,
+ ctl_port_type port_type, int no_virtual);
+
+/*
+ * Put a string into an sbuf, escaping characters that are illegal or not
+ * recommended in XML. Note this doesn't escape everything, just > < and &.
+ */
+int ctl_sbuf_printf_esc(struct sbuf *sb, char *str);
+
+int ctl_ffz(uint32_t *mask, uint32_t size);
+int ctl_set_mask(uint32_t *mask, uint32_t bit);
+int ctl_clear_mask(uint32_t *mask, uint32_t bit);
+int ctl_is_set(uint32_t *mask, uint32_t bit);
+int ctl_control_page_handler(struct ctl_scsiio *ctsio,
+ struct ctl_page_index *page_index,
+ uint8_t *page_ptr);
+/**
+int ctl_failover_sp_handler(struct ctl_scsiio *ctsio,
+ struct ctl_page_index *page_index,
+ uint8_t *page_ptr);
+**/
+int ctl_power_sp_handler(struct ctl_scsiio *ctsio,
+ struct ctl_page_index *page_index, uint8_t *page_ptr);
+int ctl_power_sp_sense_handler(struct ctl_scsiio *ctsio,
+ struct ctl_page_index *page_index, int pc);
+int ctl_aps_sp_handler(struct ctl_scsiio *ctsio,
+ struct ctl_page_index *page_index, uint8_t *page_ptr);
+int ctl_debugconf_sp_sense_handler(struct ctl_scsiio *ctsio,
+ struct ctl_page_index *page_index,
+ int pc);
+int ctl_debugconf_sp_select_handler(struct ctl_scsiio *ctsio,
+ struct ctl_page_index *page_index,
+ uint8_t *page_ptr);
+int ctl_config_move_done(union ctl_io *io);
+void ctl_datamove(union ctl_io *io);
+void ctl_done(union ctl_io *io);
+void ctl_config_write_done(union ctl_io *io);
+#if 0
+int ctl_thread(void *arg);
+#endif
+void ctl_wakeup_thread(void);
+#if 0
+struct ctl_thread *ctl_create_thread(void (*thread_func)
+ (void *thread_arg), void *thread_arg, const char *thread_name);
+void ctl_signal_thread(struct ctl_thread *thread);
+void ctl_shutdown_thread(struct ctl_thread *thread);
+#endif
+void ctl_portDB_changed(int portnum);
+void ctl_init_isc_msg(void);
+
+#endif /* _KERNEL */
+
+#endif /* _CTL_H_ */
+
+/*
+ * vim: ts=8
+ */
OpenPOWER on IntegriCloud