diff options
Diffstat (limited to 'sys/arm/s3c2xx0/s3c24x0reg.h')
-rw-r--r-- | sys/arm/s3c2xx0/s3c24x0reg.h | 672 |
1 files changed, 672 insertions, 0 deletions
diff --git a/sys/arm/s3c2xx0/s3c24x0reg.h b/sys/arm/s3c2xx0/s3c24x0reg.h new file mode 100644 index 0000000..3b8dc6e --- /dev/null +++ b/sys/arm/s3c2xx0/s3c24x0reg.h @@ -0,0 +1,672 @@ +/* $NetBSD: s3c24x0reg.h,v 1.7 2004/02/12 03:52:46 bsh Exp $ */ + +/*- + * Copyright (c) 2003 Genetec corporation All rights reserved. + * Written by Hiroyuki Bessho for Genetec corporation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of Genetec corporation may not be used to endorse + * or promote products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY GENETEC CORP. ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL GENETEC CORP. + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD$ + */ + + +/* + * Samsung S3C2410X/2400 processor is ARM920T based integrated CPU + * + * Reference: + * S3C2410X User's Manual + * S3C2400 User's Manual + */ +#ifndef _ARM_S3C2XX0_S3C24X0REG_H_ +#define _ARM_S3C2XX0_S3C24X0REG_H_ + +/* common definitions for S3C2800, S3C2410 and S3C2440 */ +#include <arm/s3c2xx0/s3c2xx0reg.h> + +/* + * Map the device registers into kernel space + */ +#define S3C24X0_DEV_START 0x48000000 +#define S3C24X0_DEV_STOP 0x60000000 +#define S3C24X0_DEV_VA_OFFSET 0xD0000000 +#define S3C24X0_DEV_VA_SIZE (S3C24X0_DEV_STOP - S3C24X0_DEV_START) +#define S3C24X0_DEV_PA_TO_VA(x) (x - S3C24X0_DEV_START + S3C24X0_DEV_VA_OFFSET) + +/* + * Physical address of integrated peripherals + */ +#define S3C24X0_MEMCTL_PA_BASE 0x48000000 /* memory controller */ +#define S3C24X0_MEMCTL_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_MEMCTL_PA_BASE) +#define S3C24X0_USBHC_PA_BASE 0x49000000 /* USB Host controller */ +#define S3C24X0_USBHC_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_USBHC_PA_BASE) +#define S3C24X0_INTCTL_PA_BASE 0x4a000000 /* Interrupt controller */ +#define S3C24X0_INTCTL_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_INTCTL_PA_BASE) +#define S3C24X0_INTCTL_SIZE 0x20 +#define S3C24X0_DMAC_PA_BASE 0x4b000000 +#define S3C24X0_DMAC_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_DMAC_PA_BASE) +#define S3C24X0_DMAC_SIZE 0xe4 +#define S3C24X0_CLKMAN_PA_BASE 0x4c000000 /* clock & power management */ +#define S3C24X0_CLKMAN_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_CLKMAN_PA_BASE) +#define S3C24X0_LCDC_PA_BASE 0x4d000000 /* LCD controller */ +#define S3C24X0_LCDC_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_LCDC_PA_BASE) +#define S3C24X0_LCDC_SIZE 0x64 +#define S3C24X0_NANDFC_PA_BASE 0x4e000000 /* NAND Flash controller */ +#define S3C24X0_NANDFC_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_NANDFC_PA_BASE) +#define S3C24X0_UART0_PA_BASE 0x50000000 +#define S3C24X0_UART0_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_UART0_PA_BASE) +#define S3C24X0_UART_PA_BASE(n) (S3C24X0_UART0_PA_BASE+0x4000*(n)) +#define S3C24X0_UART_BASE(n) S3C24X0_DEV_PA_TO_VA(S3C24X0_UART_PA_BASE(n)) +#define S3C24X0_TIMER_PA_BASE 0x51000000 +#define S3C24X0_TIMER_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_TIMER_PA_BASE) +#define S3C24X0_USBDC_PA_BASE 0x5200140 +#define S3C24X0_USBDC_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_USBDC_PA_BASE) +#define S3C24X0_USBDC_SIZE 0x130 +#define S3C24X0_WDT_PA_BASE 0x53000000 +#define S3C24X0_WDT_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_WDT_PA_BASE) +#define S3C24X0_IIC_PA_BASE 0x54000000 +#define S3C24X0_IIC_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_IIC_PA_BASE) +#define S3C24X0_IIS_PA_BASE 0x55000000 +#define S3C24X0_IIS_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_IIS_PA_BASE) +#define S3C24X0_GPIO_PA_BASE 0x56000000 +#define S3C24X0_GPIO_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_GPIO_PA_BASE) +#define S3C24X0_ADC_PA_BASE 0x58000000 +#define S3C24X0_ADC_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_ADC_PA_BASE) +#define S3C24X0_SPI0_PA_BASE 0x59000000 +#define S3C24X0_SPI0_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_SPI0_PA_BASE) +#define S3C24X0_SPI1_PA_BASE 0x59000020 +#define S3C24X0_SPI1_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_SPI1_PA_BASE) +#define S3C24X0_SDI_PA_BASE 0x5a000000 /* SD Interface */ +#define S3C24X0_SDI_BASE S3C24X0_DEV_PA_TO_VA(S3C24X0_SDI_PA_BASE) + +#define S3C24X0_REG_BASE 0x48000000 +#define S3C24X0_REG_SIZE 0x13000000 + +/* Memory controller */ +#define MEMCTL_BWSCON 0x00 /* Bus width and wait status */ +#define BWSCON_DW0_SHIFT 1 /* bank0 is odd */ +#define BWSCON_BANK_SHIFT(n) (4*(n)) /* for bank 1..7 */ +#define BWSCON_DW_MASK 0x03 +#define BWSCON_DW_8 0 +#define BWSCON_DW_16 1 +#define BWSCON_DW_32 2 +#define BWSCON_WS 0x04 /* WAIT enable for the bank */ +#define BWSCON_ST 0x08 /* SRAM use UB/LB for the bank */ + +#define MEMCTL_BANKCON0 0x04 /* Boot ROM control */ +#define MEMCTL_BANKCON(n) (0x04+4*(n)) /* BANKn control */ +#define BANKCON_MT_SHIFT 15 +#define BANKCON_MT_ROM (0<<BANKCON_MT_SHIFT) +#define BANKCON_MT_DRAM (3<<BANKCON_MT_SHIFT) +#define BANKCON_TACS_SHIFT 13 /* address set-up time to nGCS */ +#define BANKCON_TCOS_SHIFT 11 /* CS set-up to nOE */ +#define BANKCON_TACC_SHIFT 8 /* CS set-up to nOE */ +#define BANKCON_TOCH_SHIFT 6 /* CS hold time from OE */ +#define BANKCON_TCAH_SHIFT 4 /* address hold time from OE */ +#define BANKCON_TACP_SHIFT 2 /* page mode access cycle */ +#define BANKCON_TACP_2 (0<<BANKCON_TACP_SHIFT) +#define BANKCON_TACP_3 (1<<BANKCON_TACP_SHIFT) +#define BANKCON_TACP_4 (2<<BANKCON_TACP_SHIFT) +#define BANKCON_TACP_6 (3<<BANKCON_TACP_SHIFT) +#define BANKCON_PMC_4 (1<<0) +#define BANKCON_PMC_8 (2<<0) +#define BANKCON_PMC_16 (3<<0) +#define BANKCON_TRCD_SHIFT 2 /* RAS to CAS delay */ +#define BANKCON_TRCD_2 (0<<2) +#define BANKCON_TRCD_3 (1<<2) +#define BANKCON_TRCD_4 (2<<2) +#define BANKCON_SCAN_8 (0<<0) /* Column address number */ +#define BANKCON_SCAN_9 (1<<0) +#define BANKCON_SCAN_10 (2<<0) +#define MEMCTL_REFRESH 0x24 /* DRAM?SDRAM Refresh */ +#define REFRESH_REFEN (1<<23) +#define REFRESH_TREFMD (1<<22) /* 1=self refresh */ +#define REFRESH_TRP_2 (0<<20) +#define REFRESH_TRP_3 (1<<20) +#define REFRESH_TRP_4 (2<<20) +#define REFRESH_TRC_4 (0<<18) +#define REFRESH_TRC_5 (1<<18) +#define REFRESH_TRC_6 (2<<18) +#define REFRESH_TRC_7 (3<<18) +#define REFRESH_COUNTER_MASK 0x3ff +#define MEMCTL_BANKSIZE 0x28 /* Flexible Bank size */ +#define MEMCTL_MRSRB6 0x2c /* SDRAM Mode register */ +#define MEMCTL_MRSRB7 0x30 +#define MRSR_CL_SHIFT 4 /* CAS Latency */ + +#define S3C24X0_MEMCTL_SIZE 0x34 + +/* USB Host controller */ +#define S3C24X0_USBHC_SIZE 0x5c + +/* Interrupt controller */ +#define INTCTL_PRIORITY 0x0c /* IRQ Priority control */ +#define INTCTL_INTPND 0x10 /* Interrupt request status */ +#define INTCTL_INTOFFSET 0x14 /* Interrupt request source */ +#define INTCTL_SUBSRCPND 0x18 /* sub source pending */ +#define INTCTL_INTSUBMSK 0x1c /* sub mask */ + +/* Interrupt source */ +#define S3C24X0_INT_ADCTC 31 /* ADC (and TC for 2410) */ +#define S3C24X0_INT_RTC 30 /* RTC alarm */ +#define S3C24X0_INT_SPI1 29 /* SPI 1 */ +#define S3C24X0_INT_UART0 28 /* UART0 */ +#define S3C24X0_INT_IIC 27 +#define S3C24X0_INT_USBH 26 /* USB Host */ +#define S3C24X0_INT_USBD 25 /* USB Device */ +#define S3C24X0_INT_UART1 23 /* UART0 (2410 only) */ +#define S3C24X0_INT_SPI0 22 /* SPI 0 */ +#define S3C24X0_INT_SDI 21 +#define S3C24X0_INT_DMA3 20 +#define S3C24X0_INT_DMA2 19 +#define S3C24X0_INT_DMA1 18 +#define S3C24X0_INT_DMA0 17 +#define S3C24X0_INT_LCD 16 + +#define S3C24X0_INT_UART2 15 /* UART2 int (2410) */ +#define S3C24X0_INT_TIMER4 14 +#define S3C24X0_INT_TIMER3 13 +#define S3C24X0_INT_TIMER2 12 +#define S3C24X0_INT_TIMER1 11 +#define S3C24X0_INT_TIMER0 10 +#define S3C24X0_INT_TIMER(n) (10+(n)) /* timer interrupt [4:0] */ +#define S3C24X0_INT_WDT 9 /* Watch dog timer */ +#define S3C24X0_INT_TICK 8 +#define S3C24X0_INT_BFLT 7 /* Battery fault */ +#define S3C24X0_INT_8_23 5 /* Ext int 8..23 */ +#define S3C24X0_INT_4_7 4 /* Ext int 4..7 */ +#define S3C24X0_INT_EXT(n) (n) /* External interrupt [3:0] for 24{1,4}0 */ + +/* 24{1,4}0 has more than 32 interrupt sources. These are sub-sources + * that are OR-ed into main interrupt sources, and controlled via + * SUBSRCPND and SUBSRCMSK registers */ +#define S3C24X0_SUBIRQ_MIN 32 + +/* cascaded to INT_ADCTC */ +#define S3C24X0_INT_ADC (S3C24X0_SUBIRQ_MIN+10) /* AD converter */ +#define S3C24X0_INT_TC (S3C24X0_SUBIRQ_MIN+9) /* Touch screen */ +/* cascaded to INT_UART2 */ +#define S3C24X0_INT_ERR2 (S3C24X0_SUBIRQ_MIN+8) /* UART2 Error */ +#define S3C24X0_INT_TXD2 (S3C24X0_SUBIRQ_MIN+7) /* UART2 Tx */ +#define S3C24X0_INT_RXD2 (S3C24X0_SUBIRQ_MIN+6) /* UART2 Rx */ +/* cascaded to INT_UART1 */ +#define S3C24X0_INT_ERR1 (S3C24X0_SUBIRQ_MIN+5) /* UART1 Error */ +#define S3C24X0_INT_TXD1 (S3C24X0_SUBIRQ_MIN+4) /* UART1 Tx */ +#define S3C24X0_INT_RXD1 (S3C24X0_SUBIRQ_MIN+3) /* UART1 Rx */ +/* cascaded to INT_UART0 */ +#define S3C24X0_INT_ERR0 (S3C24X0_SUBIRQ_MIN+2) /* UART0 Error */ +#define S3C24X0_INT_TXD0 (S3C24X0_SUBIRQ_MIN+1) /* UART0 Tx */ +#define S3C24X0_INT_RXD0 (S3C24X0_SUBIRQ_MIN+0) /* UART0 Rx */ + +/* DMA controller */ +/* XXX */ + +/* Clock & power manager */ +#define CLKMAN_LOCKTIME 0x00 /* PLL lock time */ +#define CLKMAN_MPLLCON 0x04 /* MPLL control */ +#define CLKMAN_UPLLCON 0x08 /* UPLL control */ +#define PLLCON_MDIV_SHIFT 12 +#define PLLCON_MDIV_MASK (0xff<<PLLCON_MDIV_SHIFT) +#define PLLCON_PDIV_SHIFT 4 +#define PLLCON_PDIV_MASK (0x3f<<PLLCON_PDIV_SHIFT) +#define PLLCON_SDIV_SHIFT 0 +#define PLLCON_SDIV_MASK (0x03<<PLLCON_SDIV_SHIFT) +#define CLKMAN_CLKCON 0x0c +#define CLKCON_SPI (1<<18) +#define CLKCON_IIS (1<<17) +#define CLKCON_IIC (1<<16) +#define CLKCON_ADC (1<<15) +#define CLKCON_RTC (1<<14) +#define CLKCON_GPIO (1<<13) +#define CLKCON_UART2 (1<<12) +#define CLKCON_UART1 (1<<11) +#define CLKCON_UART0 (1<<10) /* PCLK to UART0 */ +#define CLKCON_SDI (1<<9) +#define CLKCON_TIMER (1<<8) /* PCLK to TIMER */ +#define CLKCON_USBD (1<<7) /* PCLK to USB device controller */ +#define CLKCON_USBH (1<<6) /* PCLK to USB host controller */ +#define CLKCON_LCDC (1<<5) /* PCLK to LCD controller */ +#define CLKCON_NANDFC (1<<4) /* PCLK to NAND Flash controller */ +#define CLKCON_IDLE (1<<2) /* 1=transition to IDLE mode */ +#define CLKMAN_CLKSLOW 0x10 +#define CLKMAN_CLKDIVN 0x14 +#define CLKDIVN_PDIVN (1<<0) /* pclk=hclk/2 */ + +#define CLKMAN_CLKSLOW 0x10 /* slow clock controll */ +#define CLKSLOW_UCLK (1<<7) /* 1=UPLL off */ +#define CLKSLOW_MPLL (1<<5) /* 1=PLL off */ +#define CLKSLOW_SLOW (1<<4) /* 1: Enable SLOW mode */ +#define CLKSLOW_VAL_MASK 0x0f /* divider value for slow clock */ + +#define CLKMAN_CLKDIVN 0x14 /* Software reset control */ +#define CLKDIVN_PDIVN (1<<0) + +#define S3C24X0_CLKMAN_SIZE 0x18 + +/* LCD controller */ +#define LCDC_LCDCON1 0x00 /* control 1 */ +#define LCDCON1_ENVID (1<<0) /* enable video */ +#define LCDCON1_BPPMODE_SHIFT 1 +#define LCDCON1_BPPMODE_MASK (0x0f<<LCDCON1_BPPMODE_SHIFT) +#define LCDCON1_BPPMODE_STN1 (0x0<<LCDCON1_BPPMODE_SHIFT) +#define LCDCON1_BPPMODE_STN2 (0x1<<LCDCON1_BPPMODE_SHIFT) +#define LCDCON1_BPPMODE_STN4 (0x2<<LCDCON1_BPPMODE_SHIFT) +#define LCDCON1_BPPMODE_STN8 (0x3<<LCDCON1_BPPMODE_SHIFT) +#define LCDCON1_BPPMODE_STN12 (0x4<<LCDCON1_BPPMODE_SHIFT) +#define LCDCON1_BPPMODE_TFT1 (0x8<<LCDCON1_BPPMODE_SHIFT) +#define LCDCON1_BPPMODE_TFT2 (0x9<<LCDCON1_BPPMODE_SHIFT) +#define LCDCON1_BPPMODE_TFT4 (0xa<<LCDCON1_BPPMODE_SHIFT) +#define LCDCON1_BPPMODE_TFT8 (0xb<<LCDCON1_BPPMODE_SHIFT) +#define LCDCON1_BPPMODE_TFT16 (0xc<<LCDCON1_BPPMODE_SHIFT) +#define LCDCON1_BPPMODE_TFT24 (0xd<<LCDCON1_BPPMODE_SHIFT) +#define LCDCON1_BPPMODE_TFTX (0x8<<LCDCON1_BPPMODE_SHIFT) + +#define LCDCON1_PNRMODE_SHIFT 5 +#define LCDCON1_PNRMODE_MASK (0x3<<LCDCON1_PNRMODE_SHIFT) +#define LCDCON1_PNRMODE_DUALSTN4 (0x0<<LCDCON1_PNRMODE_SHIFT) +#define LCDCON1_PNRMODE_SINGLESTN4 (0x1<<LCDCON1_PNRMODE_SHIFT) +#define LCDCON1_PNRMODE_SINGLESTN8 (0x2<<LCDCON1_PNRMODE_SHIFT) +#define LCDCON1_PNRMODE_TFT (0x3<<LCDCON1_PNRMODE_SHIFT) + +#define LCDCON1_MMODE (1<<7) /* VM toggle rate */ +#define LCDCON1_CLKVAL_SHIFT 8 +#define LCDCON1_CLKVAL_MASK (0x3ff<<LCDCON1_CLKVAL_SHIFT) +#define LCDCON1_LINCNT_SHIFT 18 +#define LCDCON1_LINCNT_MASK (0x3ff<<LCDCON1_LINCNT_SHIFT) + +#define LCDC_LCDCON2 0x04 /* control 2 */ +#define LCDCON2_VPSW_SHIFT 0 /* TFT Vsync pulse width */ +#define LCDCON2_VPSW_MASK (0x3f<<LCDCON2_VPSW_SHIFT) +#define LCDCON2_VFPD_SHIFT 6 /* TFT V front porch */ +#define LCDCON2_VFPD_MASK (0xff<<LCDCON2_VFPD_SHIFT) +#define LCDCON2_LINEVAL_SHIFT 14 /* Vertical size */ +#define LCDCON2_LINEVAL_MASK (0x3ff<<LCDCON2_LINEVAL_SHIFT) +#define LCDCON2_VBPD_SHIFT 24 /* TFT V back porch */ +#define LCDCON2_VBPD_MASK (0xff<<LCDCON2_VBPD_SHIFT) + +#define LCDC_LCDCON3 0x08 /* control 2 */ +#define LCDCON3_HFPD_SHIFT 0 /* TFT H front porch */ +#define LCDCON3_HFPD_MASK (0xff<<LCDCON3_VPFD_SHIFT) +#define LCDCON3_LINEBLANK_SHIFT 0 /* STN H blank time */ +#define LCDCON3_LINEBLANK_MASK (0xff<<LCDCON3_LINEBLANK_SHIFT) +#define LCDCON3_HOZVAL_SHIFT 8 /* Horizontal size */ +#define LCDCON3_HOZVAL_MASK (0x7ff<<LCDCON3_HOZVAL_SHIFT) +#define LCDCON3_HBPD_SHIFT 19 /* TFT H back porch */ +#define LCDCON3_HBPD_MASK (0x7f<<LCDCON3_HPBD_SHIFT) +#define LCDCON3_WDLY_SHIFT 19 /* STN vline delay */ +#define LCDCON3_WDLY_MASK (0x03<<LCDCON3_WDLY_SHIFT) +#define LCDCON3_WDLY_16 (0x00<<LCDCON3_WDLY_SHIFT) +#define LCDCON3_WDLY_32 (0x01<<LCDCON3_WDLY_SHIFT) +#define LCDCON3_WDLY_64 (0x02<<LCDCON3_WDLY_SHIFT) +#define LCDCON3_WDLY_128 (0x03<<LCDCON3_WDLY_SHIFT) + +#define LCDC_LCDCON4 0x0c /* control 4 */ +#define LCDCON4_HPSW_SHIFT 0 /* TFT Hsync pulse width */ +#define LCDCON4_HPSW_MASK (0xff<<LCDCON4_HPSW_SHIFT) +#define LCDCON4_WLH_SHIFT 0 /* STN VLINE high width */ +#define LCDCON4_WLH_MASK (0x03<<LCDCON4_WLH_SHIFT) +#define LCDCON4_WLH_16 (0x00<<LCDCON4_WLH_SHIFT) +#define LCDCON4_WLH_32 (0x01<<LCDCON4_WLH_SHIFT) +#define LCDCON4_WLH_64 (0x02<<LCDCON4_WLH_SHIFT) +#define LCDCON4_WLH_128 (0x03<<LCDCON4_WLH_SHIFT) + +#define LCDCON4_MVAL_SHIFT 8 /* STN VM toggle rate */ +#define LCDCON4_MVAL_MASK (0xff<<LCDCON4_MVAL_SHIFT) + +#define LCDC_LCDCON5 0x10 /* control 5 */ +#define LCDCON5_HWSWP (1<<0) /* half-word swap */ +#define LCDCON5_BSWP (1<<1) /* byte swap */ +#define LCDCON5_ENLEND (1<<2) /* TFT: enable LEND signal */ +#define LCDCON5_PWREN (1<<3) /* enable PWREN signale */ +#define LCDCON5_INVLEND (1<<4) /* TFT: LEND signal polarity */ +#define LCDCON5_INVPWREN (1<<5) /* PWREN signal polarity */ +#define LCDCON5_INVVDEN (1<<6) /* VDEN signal polarity */ +#define LCDCON5_INVVD (1<<7) /* video data signal polarity */ +#define LCDCON5_INVVFRAME (1<<8) /* VFRAME/VSYNC signal polarity */ +#define LCDCON5_INVVLINE (1<<9) /* VLINE/HSYNC signal polarity */ +#define LCDCON5_INVVCLK (1<<10) /* VCLK signal polarity */ +#define LCDCON5_INVVCLK_RISING LCDCON5_INVVCLK +#define LCDCON5_INVVCLK_FALLING 0 +#define LCDCON5_FRM565 (1<<11) /* RGB:565 format*/ +#define LCDCON5_FRM555I 0 /* RGBI:5551 format */ +#define LCDCON5_BPP24BL (1<<12) /* bit order for bpp24 */ + +#define LCDCON5_HSTATUS_SHIFT 17 /* TFT: horizontal status */ +#define LCDCON5_HSTATUS_MASK (0x03<<LCDCON5_HSTATUS_SHIFT) +#define LCDCON5_HSTATUS_HSYNC (0x00<<LCDCON5_HSTATUS_SHIFT) +#define LCDCON5_HSTATUS_BACKP (0x01<<LCDCON5_HSTATUS_SHIFT) +#define LCDCON5_HSTATUS_ACTIVE (0x02<<LCDCON5_HSTATUS_SHIFT) +#define LCDCON5_HSTATUS_FRONTP (0x03<<LCDCON5_HSTATUS_SHIFT) + +#define LCDCON5_VSTATUS_SHIFT 19 /* TFT: vertical status */ +#define LCDCON5_VSTATUS_MASK (0x03<<LCDCON5_VSTATUS_SHIFT) +#define LCDCON5_VSTATUS_HSYNC (0x00<<LCDCON5_VSTATUS_SHIFT) +#define LCDCON5_VSTATUS_BACKP (0x01<<LCDCON5_VSTATUS_SHIFT) +#define LCDCON5_VSTATUS_ACTIVE (0x02<<LCDCON5_VSTATUS_SHIFT) +#define LCDCON5_VSTATUS_FRONTP (0x03<<LCDCON5_VSTATUS_SHIFT) + +#define LCDC_LCDSADDR1 0x14 /* frame buffer start address */ +#define LCDC_LCDSADDR2 0x18 +#define LCDC_LCDSADDR3 0x1c +#define LCDSADDR3_OFFSIZE_SHIFT 11 +#define LCDSADDR3_PAGEWIDTH_SHIFT 0 + +#define LCDC_REDLUT 0x20 /* STN: red lookup table */ +#define LCDC_GREENLUT 0x24 /* STN: green lookup table */ +#define LCDC_BLUELUT 0x28 /* STN: blue lookup table */ +#define LCDC_DITHMODE 0x4c /* STN: dithering mode */ + +#define LCDC_TPAL 0x50 /* TFT: temporary palette */ +#define TPAL_TPALEN (1<<24) +#define TPAL_RED_SHIFT 16 +#define TPAL_GREEN_SHIFT 8 +#define TPAL_BLUE_SHIFT 0 + +#define LCDC_LCDINTPND 0x54 +#define LCDC_LCDSRCPND 0x58 +#define LCDC_LCDINTMSK 0x5c +#define LCDINT_FICNT (1<<0) /* FIFO trigger interrupt pending */ +#define LCDINT_FRSYN (1<<1) /* frame sync interrupt pending */ +#define LCDINT_FIWSEL (1<<2) /* FIFO trigger level: 1=8 words, 0=4 words*/ + +#define LCDC_LPCSEL 0x60 /* LPC3600 mode */ +#define LPCSEL_LPC_EN (1<<0) /* enable LPC3600 mode */ +#define LPCSEL_RES_SEL (1<<1) /* 1=240x320 0=320x240 */ +#define LPCSEL_MODE_SEL (1<<2) +#define LPCSEL_CPV_SEL (1<<3) + + +#define LCDC_PALETTE 0x0400 +#define LCDC_PALETTE_SIZE 0x0400 + +/* NAND Flash controller */ +#define NANDFC_NFCONF 0x00 /* Configuration */ +/* NANDFC_NFSTAT */ +#define NFSTAT_READY (1<<0) /* NAND flash memory ready/busy status */ + + +/* MMC/SD */ +#define SDI_CON 0x00 +#define CON_BYTEORDER (1<<4) +#define CON_SDIO_INTR (1<<3) +#define CON_READWAIT_EN (1<<2) +#define CON_CLOCK_EN (1<<0) +#define SDI_PRE 0x04 +#define SDI_CARG 0x08 +#define SDI_CCON 0x0c +#define CCON_ABORDCMD (1<<12) /* Abort SDIO CMD12/52 */ +#define CCON_WITHDATA (1<<11) /* CMD with data */ +#define CCON_LONGRSP (1<<10) /* 136 bit response */ +#define CCON_WAITRSP (1<<9) /* Host waits for response */ +#define CCON_CMD_START (1<<8) +#define CCON_CMDINDEX_MASK (0x7F) /* Command number index */ +#define SDI_CSTA 0x10 +#define CSTA_RSPCRCFAIL (1<<12) +#define CSTA_CMDSENT (1<<11) +#define CSTA_CMDTOUT (1<<10) +#define CSTA_RSPFIN (1<<9) +/* All the bits to be cleared */ +#define CSTA_ALL_CLEAR (CSTA_RSPCRCFAIL | CSTA_CMDSENT | \ + CSTA_CMDTOUT | CSTA_RSPFIN) +#define CSTA_ERROR (CSTA_RSPCRCFAIL | CSTA_CMDTOUT) +#define CSTA_CMDON (1<<8) +#define SDI_RSP0 0x14 +#define SDI_RSP1 0x18 +#define SDI_RSP2 0x1c +#define SDI_RSP3 0x20 +#define SDI_DTIMER 0x24 +#define SDI_BSIZE 0x28 +#define SDI_DCON 0x2c +#define DCON_PRDTYPE (1<<21) +#define DCON_TARSP (1<<20) /* Transmit after response */ +#define DCON_RACMD (1<<19) /* Receive after command */ +#define DCON_BACMD (1<<18) /* Busy after command */ +#define DCON_BLKMODE (1<<17) /* Stream/Block mode */ +#define DCON_WIDEBUS (1<<16) /* Standard/Wide bus */ +#define DCON_ENDMA (1<<15) /* DMA Enable */ +/* Determine the direction of the data transfer */ +#define DCON_DATA_READY (0<<12) /* No transfer */ +#define DCON_ONLYBUST (1<<12) /* Check if busy */ +#define DCON_DATA_RECEIVE (2<<12) /* Receive data from SD */ +#define DCON_DATA_TRANSMIT (3<<12) /* Send data to SD */ +#define DCON_BLKNUM_MASK (0x7FF) /* Block number */ +#define SDI_DCNT 0x30 +#define SDI_DSTA 0x34 +#define SDI_FSTA 0x38 +#define FSTA_TX_AVAIL (1<<13) +#define FSTA_RX_AVAIL (1<<12) +#define FSTA_TX_FIFO_HALF_FULL (1<<11) +#define FSTA_TX_FIFO_EMPTY (1<<10) +#define FSTA_RX_FIFO_LAST_DATA (1<<9) +#define FSTA_RX_FIFO_FULL (1<<8) +#define FSTA_RX_FIFO_HALF_FULL (1<<7) +#define FSTA_FIFO_COUNT_MSK (0x7F) + +/* Timer */ +#define TIMER_TCFG0 0x00 /* Timer configuration */ +#define TIMER_TCFG1 0x04 +#define TCFG1_MUX_SHIFT(n) (4*(n)) +#define TCFG1_MUX_MASK(n) (0x0f << TCFG1_MUX_SHIFT(n)) +#define TCFG1_MUX_DIV2 0 +#define TCFG1_MUX_DIV4 1 +#define TCFG1_MUX_DIV8 2 +#define TCFG1_MUX_DIV16 3 +#define TCFG1_MUX_EXT 4 +#define TIMER_TCON 0x08 /* control */ +#define TCON_SHIFT(n) (4 * ((n)==0 ? 0 : (n)+1)) +#define TCON_START(n) (1 << TCON_SHIFT(n)) +#define TCON_MANUALUPDATE(n) (1 << (TCON_SHIFT(n) + 1)) +#define TCON_INVERTER(n) (1 << (TCON_SHIFT(n) + 2)) +#define __TCON_AUTORELOAD(n) (1 << (TCON_SHIFT(n) + 3)) /* n=0..3 */ +#define TCON_AUTORELOAD4 (1<<22) /* stupid hardware design */ +#define TCON_AUTORELOAD(n) \ + ((n)==4 ? TCON_AUTORELOAD4 : __TCON_AUTORELOAD(n)) +#define TCON_MASK(n) (0x0f << TCON_SHIFT(n)) +#define TIMER_TCNTB(n) (0x0c+0x0c*(n)) /* count buffer */ +#define TIMER_TCMPB(n) (0x10+0x0c*(n)) /* compare buffer */ +#define __TIMER_TCNTO(n) (0x14+0x0c*(n)) /* count observation */ +#define TIMER_TCNTO4 0x40 +#define TIMER_TCNTO(n) ((n)==4 ? TIMER_TCNTO4 : __TIMER_TCNTO(n)) + +#define S3C24X0_TIMER_SIZE 0x44 + +/* UART */ +/* diffs to s3c2800 */ +/* SSCOM_UMCON */ +#define UMCON_AFC (1<<4) /* auto flow control */ +/* SSCOM_UMSTAT */ +#define UMSTAT_DCTS (1<<2) /* CTS change */ +/* SSCOM_UMSTAT */ +#define ULCON_IR (1<<6) +#define ULCON_PARITY_SHIFT 3 + +#define S3C24X0_UART_SIZE 0x2c + +/* USB device */ +/* XXX */ + +/* Watch dog timer */ +#define WDT_WTCON 0x00 /* WDT mode */ +#define WTCON_PRESCALE_SHIFT 8 +#define WTCON_PRESCALE (0xff<<WTCON_PRESCALE_SHIFT) +#define WTCON_ENABLE (1<<5) +#define WTCON_CLKSEL (3<<3) +#define WTCON_CLKSEL_16 (0<<3) +#define WTCON_CLKSEL_32 (1<<3) +#define WTCON_CLKSEL_64 (2<<3) +#define WTCON_CLKSEL_128 (3<<3) +#define WTCON_ENINT (1<<2) +#define WTCON_ENRST (1<<0) + +#define WTCON_WDTSTOP 0 + +#define WDT_WTDAT 0x04 /* timer data */ +#define WDT_WTCNT 0x08 /* timer count */ + +#define S3C24X0_WDT_SIZE 0x0c + +/* IIC */ +#define S3C24X0_IIC_SIZE 0x0c + + +/* IIS */ +#define S3C24X0_IIS_SIZE 0x14 + +/* GPIO */ +#define GPIO_PACON 0x00 /* port A configuration */ +#define GPIO_PADAT 0x04 /* port A data */ + +#define GPIO_PBCON 0x10 +/* These are only used on port B-H on 2410 & B-H,J on 2440 */ +#define PCON_INPUT 0 /* Input port */ +#define PCON_OUTPUT 1 /* Output port */ +#define PCON_ALTFUN 2 /* Alternate function */ +#define PCON_ALTFUN2 3 /* Alternate function */ +#define GPIO_PBDAT 0x14 +/* This is different between 2440 and 2442 (pull up vs pull down): */ +#define GPIO_PBUP 0x18 /* 2410 & 2440 */ +#define GPIO_PBDOWN 0x18 /* 2442 */ + +#define GPIO_PCCON 0x20 +#define GPIO_PCDAT 0x24 +#define GPIO_PCUP 0x28 /* 2410 & 2440 */ +#define GPIO_PCDOWN 0x28 /* 2442 */ + +#define GPIO_PDCON 0x30 +#define GPIO_PDDAT 0x34 +#define GPIO_PDUP 0x38 /* 2410 & 2440 */ +#define GPIO_PDDOWN 0x38 /* 2442 */ + +#define GPIO_PECON 0x40 +#define PECON_INPUT(x) (0<<((x)*2)) /* Pin is used for input */ +#define PECON_OUTPUT(x) (1<<((x)*2)) /* Pin is used for output */ +#define PECON_FUNC_A(x) (2<<((x)*2)) /* Pin is used for function 'A' */ +#define PECON_FUNC_B(x) (3<<((x)*2)) /* Pin is used for function 'B' */ +#define PECON_MASK(x) (3<<((x)*2)) +#define GPIO_PEDAT 0x44 +#define GPIO_PEUP 0x48 /* 2410 & 2440 */ +#define GPIO_PEDOWN 0x48 /* 2442 */ +#define PEUD_ENABLE(x) (~(1<<(x))) /* Enable the pull Up/Down */ +#define PEUD_DISABLE(x) (1<<(x)) /* Disable the pull Up/Down */ + +#define GPIO_PFCON 0x50 +#define GPIO_PFDAT 0x54 +#define GPIO_PFUP 0x58 /* 2410 & 2440 */ +#define GPIO_PFDOWN 0x58 /* 2442 */ + +#define GPIO_PGCON 0x60 +#define GPIO_PGDAT 0x64 +#define GPIO_PGUP 0x68 /* 2410 & 2440 */ +#define GPIO_PGDOWN 0x68 /* 2442 */ + +#define GPIO_PHCON 0x70 +#define GPIO_PHDAT 0x74 +#define GPIO_PHUP 0x78 /* 2410 & 2440 */ +#define GPIO_PHDOWN 0x78 /* 2442 */ + +#define GPIO_MISCCR 0x80 /* miscellaneous control */ +#define GPIO_DCLKCON 0x84 /* DCLK 0/1 */ +#define GPIO_EXTINT(n) (0x88+4*(n)) /* external int control 0/1/2 */ +#define GPIO_EINTFLT(n) (0x94+4*(n)) /* external int filter control 0..3 */ +#define EXTINTR_LOW 0x00 +#define EXTINTR_HIGH 0x01 +#define EXTINTR_FALLING 0x02 +#define EXTINTR_RISING 0x04 +#define EXTINTR_BOTH 0x06 +#define GPIO_EINTMASK 0xa4 +#define GPIO_EINTPEND 0xa8 +#define GPIO_GSTATUS0 0xac /* external pin status */ +#define GPIO_GSTATUS1 0xb0 /* Chip ID */ +#define CHIPID_S3C2410A 0x32410002 +#define CHIPID_S3C2440A 0x32440001 +#define CHIPID_S3C2442B 0x32440AAB +#define GPIO_GSTATUS2 0xb4 /* Reset status */ +#define GPIO_GSTATUS3 0xb8 +#define GPIO_GSTATUS4 0xbc + +#define GPIO_SET_FUNC(v,port,func) \ + (((v) & ~(3<<(2*(port))))|((func)<<(2*(port)))) + +/* ADC */ +#define ADC_ADCCON 0x00 +#define ADCCON_ENABLE_START (1<<0) +#define ADCCON_READ_START (1<<1) +#define ADCCON_STDBM (1<<2) +#define ADCCON_SEL_MUX_SHIFT 3 +#define ADCCON_SEL_MUX_MASK (0x7<<ADCCON_SEL_MUX_SHIFT) +#define ADCCON_PRSCVL_SHIFT 6 +#define ADCCON_PRSCVL_MASK (0xff<<ADCCON_PRSCVL_SHIFT) +#define ADCCON_PRSCEN (1<<14) +#define ADCCON_ECFLG (1<<15) + +#define ADC_ADCTSC 0x04 +#define ADCTSC_XY_PST 0x03 +#define ADCTSC_AUTO_PST (1<<2) +#define ADCTSC_PULL_UP (1<<3) +#define ADCTSC_XP_SEN (1<<4) +#define ADCTSC_XM_SEN (1<<5) +#define ADCTSC_YP_SEN (1<<6) +#define ADCTSC_YM_SEN (1<<7) +#define ADC_ADCDLY 0x08 +#define ADC_ADCDAT0 0x0c +#define ADC_ADCDAT1 0x10 + +#define ADCDAT_DATAMASK 0x3ff + +/* RTC */ /* XXX */ + +/* SPI */ +#define S3C24X0_SPI_SIZE 0x20 + +#define SPI_SPCON 0x00 +#define SPCON_TAGD (1<<0) /* Tx auto garbage */ +#define SPCON_CPHA (1<<1) +#define SPCON_CPOL (1<<2) +#define SPCON_IDLELOW_RISING (0|0) +#define SPCON_IDLELOW_FALLING (0|SPCON_CPHA) +#define SPCON_IDLEHIGH_FALLING (SPCON_CPOL|0) +#define SPCON_IDLEHIGH_RISING (SPCON_CPOL|SPCON_CPHA) +#define SPCON_MSTR (1<<3) +#define SPCON_ENSCK (1<<4) +#define SPCON_SMOD_SHIFT 5 +#define SPCON_SMOD_MASK (0x03<<SPCON_SMOD_SHIFT) +#define SPCON_SMOD_POLL (0x00<<SPCON_SMOD_SHIFT) +#define SPCON_SMOD_INT (0x01<<SPCON_SMOD_SHIFT) +#define SPCON_SMOD_DMA (0x02<<SPCON_SMOD_SHIFT) + +#define SPI_SPSTA 0x04 /* status register */ +#define SPSTA_REDY (1<<0) /* ready */ +#define SPSTA_MULF (1<<1) /* multi master error */ +#define SPSTA_DCOL (1<<2) /* Data collision error */ + +#define SPI_SPPIN 0x08 +#define SPPIN_KEEP (1<<0) +#define SPPIN_ENMUL (1<<2) /* multi master error detect */ + +#define SPI_SPPRE 0x0c /* prescaler */ +#define SPI_SPTDAT 0x10 /* tx data */ +#define SPI_SPRDAT 0x14 /* rx data */ + + +#endif /* _ARM_S3C2XX0_S3C24X0REG_H_ */ |