summaryrefslogtreecommitdiffstats
path: root/sys/arm/conf/uFW-base
diff options
context:
space:
mode:
Diffstat (limited to 'sys/arm/conf/uFW-base')
-rw-r--r--sys/arm/conf/uFW-base141
1 files changed, 141 insertions, 0 deletions
diff --git a/sys/arm/conf/uFW-base b/sys/arm/conf/uFW-base
new file mode 100644
index 0000000..9f160ff
--- /dev/null
+++ b/sys/arm/conf/uFW-base
@@ -0,0 +1,141 @@
+#
+# uFW -- Custom configuration for the microFirewall kit, check out
+# https://netgate.com/products/sg-1000.html
+#
+# For more information on this file, please read the config(5) manual page,
+# and/or the handbook section on Kernel Configuration Files:
+#
+# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
+#
+# The handbook is also available locally in /usr/share/doc/handbook
+# if you've installed the doc distribution, otherwise always see the
+# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
+# latest information.
+#
+# An exhaustive list of options and more detailed explanations of the
+# device lines is also present in the ../../conf/NOTES and NOTES files.
+# If you are in doubt as to the purpose or necessity of a line, check first
+# in NOTES.
+#
+# $FreeBSD$
+
+ident uFW
+
+include "std.armv6"
+include "../ti/am335x/std.am335x"
+
+makeoptions MODULES_EXTRA="dtb/am335x am335x_dmtpps"
+
+options INTRNG
+
+options SCHED_4BSD # 4BSD scheduler
+options PLATFORM
+
+# MMC/SD/SDIO Card slot support
+device mmc # mmc/sd bus
+device mmcsd # mmc/sd flash cards
+device sdhci # mmc/sd host controller
+
+# I2C support
+device iicbus
+device iic
+device ti_i2c
+
+# eeprom
+device icee
+
+#define am335x_dmtpps # Pulse Per Second capture driver
+
+# Console and misc
+device uart
+device uart_ns8250
+device pty
+device snp
+
+# GPIO
+device gpio
+#device gpioled
+
+# ADC support
+device ti_adc
+
+# Watchdog support
+# If we don't enable the watchdog driver, the system could potentially
+# reboot automatically because the boot loader might have enabled the
+# watchdog.
+device ti_wdt
+
+# Mailbox support
+device ti_mbox
+
+# PMU support (for CCNT).
+device pmu
+
+# Wireless NIC cards
+device wlan # 802.11 support
+options IEEE80211_DEBUG # enable debug msgs
+options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
+options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
+device wlan_wep # 802.11 WEP support
+device wlan_ccmp # 802.11 CCMP support
+device wlan_tkip # 802.11 TKIP support
+device wlan_amrr # AMRR transmit rate control algorithm
+device an # Aironet 4500/4800 802.11 wireless NICs.
+device ath # Atheros NICs
+device ath_pci # Atheros pci/cardbus glue
+device ath_hal # pci/cardbus chip support
+options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
+options AH_AR5416_INTERRUPT_MITIGATION # AR5416 interrupt mitigation
+options ATH_ENABLE_11N # Enable 802.11n support for AR5416 and later
+device ath_rate_sample # SampleRate tx rate control for ath
+#device bwi # Broadcom BCM430x/BCM431x wireless NICs.
+#device bwn # Broadcom BCM43xx wireless NICs.
+device ipw # Intel 2100 wireless NICs.
+device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs.
+device iwn # Intel 4965/1000/5000/6000 wireless NICs.
+device malo # Marvell Libertas wireless NICs.
+device mwl # Marvell 88W8363 802.11n wireless NICs.
+device ral # Ralink Technology RT2500 wireless NICs.
+device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
+device wpi # Intel 3945ABG wireless NICs.
+
+# Pseudo devices.
+device loop # Network loopback
+device random # Entropy device
+device ether # Ethernet support
+device vlan # 802.1Q VLAN support
+device tun # Packet tunnel.
+device md # Memory "disks"
+device gif # IPv6 and IPv4 tunneling
+device firmware # firmware assist module
+
+# USB support
+device usb
+options USB_HOST_ALIGN=64 # Align usb buffers to cache line size.
+device musb
+device umass
+device scbus # SCSI bus (required for ATA/SCSI)
+device da # Direct Access (disks)
+
+# USB ethernet support, requires miibus
+device miibus
+
+# Ethernet
+device micphy
+device cpsw
+options CPSW_ETHERSWITCH
+device etherswitch
+device bpf
+
+# Netmap provides direct access to TX/RX rings on supported NICs
+#device netmap # netmap(4) support
+
+# Device mode support and USFS template
+#device usb_template # Control of the gadget
+#device usfs
+
+# Pinmux
+device fdt_pinctrl
+
+# Flattened Device Tree
+options FDT # Configure using FDT/DTB data
OpenPOWER on IntegriCloud