diff options
Diffstat (limited to 'sys/arm/conf/uBMC')
-rw-r--r-- | sys/arm/conf/uBMC | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/sys/arm/conf/uBMC b/sys/arm/conf/uBMC new file mode 100644 index 0000000..d3d45a3 --- /dev/null +++ b/sys/arm/conf/uBMC @@ -0,0 +1,140 @@ +# +# uBMC -- Custom configuration for the micro-BMC development kit, check out +# http://www.netgate.com and http://www.adi.com +# +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: +# +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. +# +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. +# +# $FreeBSD$ + +ident uBMC + +include "std.armv6" +include "../ti/am335x/std.am335x" + +makeoptions MODULES_EXTRA="dtb/am335x am335x_dmtpps" + +options HZ=100 +options SCHED_4BSD # 4BSD scheduler +options PLATFORM + +# Debugging for use in -current +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols +options ALT_BREAK_TO_DEBUGGER +#options VERBOSE_SYSINIT # Enable verbose sysinit messages +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: +options DDB # Enable the kernel debugger +options INVARIANTS # Enable calls of extra sanity checking +options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +options WITNESS # Enable checks to detect deadlocks and cycles +options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed +#options DIAGNOSTIC + +# NFS server support +#options NFSD + +# NFS root from boopt/dhcp +#options BOOTP +#options BOOTP_NFSROOT +#options BOOTP_COMPAT +#options BOOTP_NFSV3 +#options BOOTP_WIRED_TO=cpsw0 + +# Boot device is 2nd slice on eMMC card +options ROOTDEVNAME=\"ufs:mmcsd0s2a\" + +# MMC/SD/SDIO Card slot support +device mmc # mmc/sd bus +device mmcsd # mmc/sd flash cards +device sdhci # mmc/sd host controller + +# I2C support +device iicbus +device iic +device ti_i2c + +# eeprom +device icee + +# lm75 (carrier board) +device lm75 + +#define am335x_dmtpps # Pulse Per Second capture driver + +# Console and misc +device uart +device uart_ns8250 +device pty +device snp +device md +device random # Entropy device + +# GPIO +device gpio +device gpioled + +# ADC support +device ti_adc + +# SPI +device ti_spi +device spibus +device mx25l + +# Watchdog support +# If we don't enable the watchdog driver, the system could potentially +# reboot automatically because the boot loader might have enabled the +# watchdog. +device ti_wdt + +# Mailbox support +device ti_mbox + +# PMU support (for CCNT). +device pmu + +# USB support +device usb +options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. +options USB_DEBUG +#options USB_REQ_DEBUG +#options USB_VERBOSE +device musb +device umass +device scbus # SCSI bus (required for ATA/SCSI) +device da # Direct Access (disks) + +# USB ethernet support, requires miibus +device miibus + +# Ethernet +device loop +device ether +#device micphy +device cpsw +device bpf + +# Device mode support and USFS template +device usb_template # Control of the gadget +device usfs + +# Pinmux +device fdt_pinctrl + +# Flattened Device Tree +options FDT # Configure using FDT/DTB data |