diff options
Diffstat (limited to 'source/components/hardware/hwsleep.c')
| -rw-r--r-- | source/components/hardware/hwsleep.c | 384 |
1 files changed, 384 insertions, 0 deletions
diff --git a/source/components/hardware/hwsleep.c b/source/components/hardware/hwsleep.c new file mode 100644 index 0000000..0d31143 --- /dev/null +++ b/source/components/hardware/hwsleep.c @@ -0,0 +1,384 @@ +/****************************************************************************** + * + * Name: hwsleep.c - ACPI Hardware Sleep/Wake Support functions for the + * original/legacy sleep/PM registers. + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include "acpi.h" +#include "accommon.h" + +#define _COMPONENT ACPI_HARDWARE + ACPI_MODULE_NAME ("hwsleep") + + +#if (!ACPI_REDUCED_HARDWARE) /* Entire module */ +/******************************************************************************* + * + * FUNCTION: AcpiHwLegacySleep + * + * PARAMETERS: SleepState - Which sleep state to enter + * + * RETURN: Status + * + * DESCRIPTION: Enter a system sleep state via the legacy FADT PM registers + * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED + * + ******************************************************************************/ + +ACPI_STATUS +AcpiHwLegacySleep ( + UINT8 SleepState) +{ + ACPI_BIT_REGISTER_INFO *SleepTypeRegInfo; + ACPI_BIT_REGISTER_INFO *SleepEnableRegInfo; + UINT32 Pm1aControl; + UINT32 Pm1bControl; + UINT32 InValue; + ACPI_STATUS Status; + + + ACPI_FUNCTION_TRACE (HwLegacySleep); + + + SleepTypeRegInfo = AcpiHwGetBitRegisterInfo (ACPI_BITREG_SLEEP_TYPE); + SleepEnableRegInfo = AcpiHwGetBitRegisterInfo (ACPI_BITREG_SLEEP_ENABLE); + + /* Clear wake status */ + + Status = AcpiWriteBitRegister (ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + /* Clear all fixed and general purpose status bits */ + + Status = AcpiHwClearAcpiStatus (); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + if (SleepState != ACPI_STATE_S5) + { + /* + * Disable BM arbitration. This feature is contained within an + * optional register (PM2 Control), so ignore a BAD_ADDRESS + * exception. + */ + Status = AcpiWriteBitRegister (ACPI_BITREG_ARB_DISABLE, 1); + if (ACPI_FAILURE (Status) && (Status != AE_BAD_ADDRESS)) + { + return_ACPI_STATUS (Status); + } + } + + /* + * 1) Disable/Clear all GPEs + * 2) Enable all wakeup GPEs + */ + Status = AcpiHwDisableAllGpes (); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + AcpiGbl_SystemAwakeAndRunning = FALSE; + + Status = AcpiHwEnableAllWakeupGpes (); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + /* Execute the _GTS method (Going To Sleep) */ + + AcpiHwExecuteSleepMethod (METHOD_NAME__GTS, SleepState); + + /* Get current value of PM1A control */ + + Status = AcpiHwRegisterRead (ACPI_REGISTER_PM1_CONTROL, + &Pm1aControl); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + ACPI_DEBUG_PRINT ((ACPI_DB_INIT, + "Entering sleep state [S%u]\n", SleepState)); + + /* Clear the SLP_EN and SLP_TYP fields */ + + Pm1aControl &= ~(SleepTypeRegInfo->AccessBitMask | + SleepEnableRegInfo->AccessBitMask); + Pm1bControl = Pm1aControl; + + /* Insert the SLP_TYP bits */ + + Pm1aControl |= (AcpiGbl_SleepTypeA << SleepTypeRegInfo->BitPosition); + Pm1bControl |= (AcpiGbl_SleepTypeB << SleepTypeRegInfo->BitPosition); + + /* + * We split the writes of SLP_TYP and SLP_EN to workaround + * poorly implemented hardware. + */ + + /* Write #1: write the SLP_TYP data to the PM1 Control registers */ + + Status = AcpiHwWritePm1Control (Pm1aControl, Pm1bControl); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + /* Insert the sleep enable (SLP_EN) bit */ + + Pm1aControl |= SleepEnableRegInfo->AccessBitMask; + Pm1bControl |= SleepEnableRegInfo->AccessBitMask; + + /* Flush caches, as per ACPI specification */ + + ACPI_FLUSH_CPU_CACHE (); + + /* Write #2: Write both SLP_TYP + SLP_EN */ + + Status = AcpiHwWritePm1Control (Pm1aControl, Pm1bControl); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + if (SleepState > ACPI_STATE_S3) + { + /* + * We wanted to sleep > S3, but it didn't happen (by virtue of the + * fact that we are still executing!) + * + * Wait ten seconds, then try again. This is to get S4/S5 to work on + * all machines. + * + * We wait so long to allow chipsets that poll this reg very slowly + * to still read the right value. Ideally, this block would go + * away entirely. + */ + AcpiOsStall (10000000); + + Status = AcpiHwRegisterWrite (ACPI_REGISTER_PM1_CONTROL, + SleepEnableRegInfo->AccessBitMask); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + } + + /* Wait for transition back to Working State */ + + do + { + Status = AcpiReadBitRegister (ACPI_BITREG_WAKE_STATUS, &InValue); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + } while (!InValue); + + return_ACPI_STATUS (AE_OK); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiHwLegacyWakePrep + * + * PARAMETERS: SleepState - Which sleep state we just exited + * + * RETURN: Status + * + * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a + * sleep. + * Called with interrupts ENABLED. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiHwLegacyWakePrep ( + UINT8 SleepState) +{ + ACPI_STATUS Status; + ACPI_BIT_REGISTER_INFO *SleepTypeRegInfo; + ACPI_BIT_REGISTER_INFO *SleepEnableRegInfo; + UINT32 Pm1aControl; + UINT32 Pm1bControl; + + + ACPI_FUNCTION_TRACE (HwLegacyWakePrep); + + /* + * Set SLP_TYPE and SLP_EN to state S0. + * This is unclear from the ACPI Spec, but it is required + * by some machines. + */ + Status = AcpiGetSleepTypeData (ACPI_STATE_S0, + &AcpiGbl_SleepTypeA, &AcpiGbl_SleepTypeB); + if (ACPI_SUCCESS (Status)) + { + SleepTypeRegInfo = + AcpiHwGetBitRegisterInfo (ACPI_BITREG_SLEEP_TYPE); + SleepEnableRegInfo = + AcpiHwGetBitRegisterInfo (ACPI_BITREG_SLEEP_ENABLE); + + /* Get current value of PM1A control */ + + Status = AcpiHwRegisterRead (ACPI_REGISTER_PM1_CONTROL, + &Pm1aControl); + if (ACPI_SUCCESS (Status)) + { + /* Clear the SLP_EN and SLP_TYP fields */ + + Pm1aControl &= ~(SleepTypeRegInfo->AccessBitMask | + SleepEnableRegInfo->AccessBitMask); + Pm1bControl = Pm1aControl; + + /* Insert the SLP_TYP bits */ + + Pm1aControl |= (AcpiGbl_SleepTypeA << + SleepTypeRegInfo->BitPosition); + Pm1bControl |= (AcpiGbl_SleepTypeB << + SleepTypeRegInfo->BitPosition); + + /* Write the control registers and ignore any errors */ + + (void) AcpiHwWritePm1Control (Pm1aControl, Pm1bControl); + } + } + + AcpiHwExecuteSleepMethod (METHOD_NAME__BFS, SleepState); + return_ACPI_STATUS (Status); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiHwLegacyWake + * + * PARAMETERS: SleepState - Which sleep state we just exited + * + * RETURN: Status + * + * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep + * Called with interrupts ENABLED. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiHwLegacyWake ( + UINT8 SleepState) +{ + ACPI_STATUS Status; + + + ACPI_FUNCTION_TRACE (HwLegacyWake); + + + /* Ensure EnterSleepStatePrep -> EnterSleepState ordering */ + + AcpiGbl_SleepTypeA = ACPI_SLEEP_TYPE_INVALID; + AcpiHwExecuteSleepMethod (METHOD_NAME__SST, ACPI_SST_WAKING); + + /* + * GPEs must be enabled before _WAK is called as GPEs + * might get fired there + * + * Restore the GPEs: + * 1) Disable/Clear all GPEs + * 2) Enable all runtime GPEs + */ + Status = AcpiHwDisableAllGpes (); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + Status = AcpiHwEnableAllRuntimeGpes (); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + /* + * Now we can execute _WAK, etc. Some machines require that the GPEs + * are enabled before the wake methods are executed. + */ + AcpiHwExecuteSleepMethod (METHOD_NAME__WAK, SleepState); + + /* + * Some BIOS code assumes that WAK_STS will be cleared on resume + * and use it to determine whether the system is rebooting or + * resuming. Clear WAK_STS for compatibility. + */ + (void) AcpiWriteBitRegister (ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS); + AcpiGbl_SystemAwakeAndRunning = TRUE; + + /* Enable power button */ + + (void) AcpiWriteBitRegister( + AcpiGbl_FixedEventInfo[ACPI_EVENT_POWER_BUTTON].EnableRegisterId, + ACPI_ENABLE_EVENT); + + (void) AcpiWriteBitRegister( + AcpiGbl_FixedEventInfo[ACPI_EVENT_POWER_BUTTON].StatusRegisterId, + ACPI_CLEAR_STATUS); + + /* + * Enable BM arbitration. This feature is contained within an + * optional register (PM2 Control), so ignore a BAD_ADDRESS + * exception. + */ + Status = AcpiWriteBitRegister (ACPI_BITREG_ARB_DISABLE, 0); + if (ACPI_FAILURE (Status) && (Status != AE_BAD_ADDRESS)) + { + return_ACPI_STATUS (Status); + } + + AcpiHwExecuteSleepMethod (METHOD_NAME__SST, ACPI_SST_WORKING); + return_ACPI_STATUS (Status); +} + +#endif /* !ACPI_REDUCED_HARDWARE */ |
