diff options
Diffstat (limited to 'share')
| -rw-r--r-- | share/man/man4/mly.4 | 19 |
1 files changed, 11 insertions, 8 deletions
diff --git a/share/man/man4/mly.4 b/share/man/man4/mly.4 index be968ab..681be41 100644 --- a/share/man/man4/mly.4 +++ b/share/man/man4/mly.4 @@ -40,7 +40,8 @@ The .Nm driver provides support for Mylex AcceleRAID and eXtremeRAID-family PCI to SCSI RAID controllers with version 6.00 and later -firmware. Supported controllers include: +firmware. +Supported controllers include: .Bl -bullet .It AcceleRAID 160 @@ -59,7 +60,8 @@ verified. .Pp Logical devices (array drives) attached to the controller are presented to the SCSI subsystem as though they were direct-access devices on a -virtual SCSI bus. Physical devices which are not claimed by a logical +virtual SCSI bus. +Physical devices which are not claimed by a logical device are presented on SCSI channels which match the physical channels on the controller. .Sh DIAGNOSTICS @@ -69,8 +71,9 @@ Controller initialisation phase: .It "mly%d: initialisation complete" .El .Pp -The controller firmware has started initialisation. Normally this -process is performed by the controller BIOS, but the driver may need +The controller firmware has started initialisation. +Normally this process is performed by the controller BIOS, +but the driver may need to do this in cases where the BIOS has failed, or is not compatible (eg. on non-x86 systems). .Bl -diag @@ -126,8 +129,8 @@ controller. .It "mly%d: BTL rescan result corrupted" .El .Pp -The results of a scan for an attached device were corrupted. One or -more devices may not be correctly reported. +The results of a scan for an attached device were corrupted. +One or more devices may not be correctly reported. .Bl -diag .It "mly%d: flushing cache..." .El @@ -242,8 +245,8 @@ attached to the device if possible. .It "mly%d: enclosure %d unit %d access offline" .El .Pp -These events refer to external enclosures by number. The driver -does not attempt to name the enclosures. +These events refer to external enclosures by number. +The driver does not attempt to name the enclosures. .Bl -diag .It "mly%d: controller cache write back error" .It "mly%d: controller battery backup unit found" |
