14 files changed, 18 insertions, 18 deletions
diff --git a/share/man/man4/audit.4 b/share/man/man4/audit.4
index bcdad54..e57b4bc 100644
--- a/share/man/man4/audit.4
+++ b/share/man/man4/audit.4
@@ -72,7 +72,7 @@ This device is not intended for use by applications.
 Audit pipe special devices, discussed in
 .Xr auditpipe 4 ,
 provide a configurable live tracking mechanism to allow applications to
-tee the audit trail, as well as to configure custom preselection paramaters
+tee the audit trail, as well as to configure custom preselection parameters
 to track users and events in a fine-grained manner.
 .Sh SEE ALSO
 .Xr auditreduce 1 ,
diff --git a/share/man/man4/auditpipe.4 b/share/man/man4/auditpipe.4
index 3a639dc..8d62e7e 100644
--- a/share/man/man4/auditpipe.4
+++ b/share/man/man4/auditpipe.4
@@ -247,7 +247,7 @@ The configurable preselection mechanism mirrors the selection model present
 for the global audit trail.
 It might be desirable to provided a more flexible selection model.
 .Pp
-The per-pipe audit event queue is fifo, with drops occuring if either the
+The per-pipe audit event queue is fifo, with drops occurring if either the
 user thread provides in sufficient for the record on the queue head, or on
 enqueue if there is insufficient room.
 It might be desirable to support partial reads of records, which would be
diff --git a/share/man/man4/bce.4 b/share/man/man4/bce.4
index 458f83f..a400ab7 100644
--- a/share/man/man4/bce.4
+++ b/share/man/man4/bce.4
@@ -237,7 +237,7 @@ The driver was not able to synchronize with the firmware running on the
 controller.
 The firmware may be stopped or hung.
 .It "bce%d: Invalid Ethernet address!"
-The driver was not able to read a vaild Ethernet MAC address from NVRAM.
+The driver was not able to read a valid Ethernet MAC address from NVRAM.
 .It "bce%d: Reset failed!"
 The driver has encountered a fatal initialization error.
 .It "bce%d: Byte swap is incorrect!"
diff --git a/share/man/man4/fast_ipsec.4 b/share/man/man4/fast_ipsec.4
index 0c693d3..336cdbf 100644
--- a/share/man/man4/fast_ipsec.4
+++ b/share/man/man4/fast_ipsec.4
@@ -72,7 +72,7 @@ The user should refer to
 for basic information on setting up and using these protocols.
 Note that it is not currently possible to use
 .Nm
-in conjuction with the
+in conjunction with the
 .Tn "KAME IPsec"
 implementation.
 .Pp
diff --git a/share/man/man4/fdc.4 b/share/man/man4/fdc.4
index d13b008..9ee9561 100644
--- a/share/man/man4/fdc.4
+++ b/share/man/man4/fdc.4
@@ -157,7 +157,7 @@ drives.
 In that case, the CMOS configuration memory will be
 consulted to obtain the value for that drive.
 The ACPI probe automatically determines these values via the _FDE and
-_FDI methods, but this can be overriden by specifying a drive type hint.
+_FDI methods, but this can be overridden by specifying a drive type hint.
 .Pp
 Normally, each configured drive will be probed at initialization
 time, using a short seek sequence.
diff --git a/share/man/man4/iic.4 b/share/man/man4/iic.4
index dc1ceb3..0112ff8 100644
--- a/share/man/man4/iic.4
+++ b/share/man/man4/iic.4
@@ -102,7 +102,7 @@ Short reads on the bus produce undefined results.
 Generic read/write interface.
 Allows for an arbitrary number of commands to be sent to
 an arbitrary number of devices on the bus.
-A read transfer is speficied if
+A read transfer is specified if
 .Dv IIC_M_RD
 is set in
 .Va flags .
diff --git a/share/man/man4/inet.4 b/share/man/man4/inet.4
index 74e5cfe..b1878d5 100644
--- a/share/man/man4/inet.4
+++ b/share/man/man4/inet.4
@@ -229,7 +229,7 @@ accordingly.
 By setting to 2, an
 .Tn ICMP
 .Dq "prohibited by filter"
-message will be sent back in respose to incoming packets with IP options.
+message will be sent back in response to incoming packets with IP options.
 Default is 1.
 This
 .Xr sysctl 8
diff --git a/share/man/man4/ipmi.4 b/share/man/man4/ipmi.4
index 11b78ca..a061df2 100644
--- a/share/man/man4/ipmi.4
+++ b/share/man/man4/ipmi.4
@@ -110,7 +110,7 @@ Get the slave LUN for source messages.
 .Ss Unimplemented Ioctls
 .Bl -tag -width indent
 .It Dv IPMICTL_REGISTER_FOR_CMD Pq Vt "struct ipmi_cmdspec"
-Register to receive a specfic command
+Register to receive a specific command
 Possible error values:
 .Bl -tag -width Er
 .It Bq Er EFAULT
diff --git a/share/man/man4/lmc.4 b/share/man/man4/lmc.4
index 6606df6..dc8e47b 100644
--- a/share/man/man4/lmc.4
+++ b/share/man/man4/lmc.4
@@ -700,7 +700,7 @@ DCEs (modems) drive ST, Send Timing, the first transmit clock.
 DTEs (hosts) receive ST and use it to clock transmit data, TD,
 onto the modem cable.
 DTEs also drive a copy of ST back towards the DCE and call it TT,
-Transmit Timing, the second trasmit clock.
+Transmit Timing, the second transmit clock.
 DCEs receive TT and TD and use TT to clock TD into a flip flop.
 TT experiences the same delay as (and has no
 .Em skew
@@ -736,7 +736,7 @@ designed the Ethernet-to-HDLC gate array and PC cards.
 We did this at our company, LAN Media Corporation
 .Tn (LMC) .
 .Tn SBE
-Corp.\& aquired
+Corp.\& acquired
 .Tn LMC
 and continues to make the cards.
 .Pp
diff --git a/share/man/man4/ng_tag.4 b/share/man/man4/ng_tag.4
index a94700c..98cfa24 100644
--- a/share/man/man4/ng_tag.4
+++ b/share/man/man4/ng_tag.4
@@ -207,7 +207,7 @@ option.
 The reason for this is that statistics is rarely used in practice,
 but still consumes CPU cycles for every packet.
 Moreover, it is even not accurate on SMP systems due to lack of
-syncronization between threads, as this is very expensive.
+synchronization between threads, as this is very expensive.
 .Sh SHUTDOWN
 This node shuts down upon receipt of a
 .Dv NGM_SHUTDOWN
diff --git a/share/man/man4/pty.4 b/share/man/man4/pty.4
index 0880d0c..aa4a51f 100644
--- a/share/man/man4/pty.4
+++ b/share/man/man4/pty.4
@@ -196,7 +196,7 @@ which can be allocated at the same time with the
 .Va kern.pts.max
 sysctl.
 It defaults to 1000.
-It is not recommanded to use more than 1000 pseudo-terminals, as all software
+It is not recommended to use more than 1000 pseudo-terminals, as all software
 which use
 .Xr utmp 5
 will not be able to handle pseudo-terminals with number superior to 999.
diff --git a/share/man/man4/snd_emu10kx.4 b/share/man/man4/snd_emu10kx.4
index 4cd733c..9c8ccab 100644
--- a/share/man/man4/snd_emu10kx.4
+++ b/share/man/man4/snd_emu10kx.4
@@ -113,7 +113,7 @@ as
 All other cards with -DAT chipsets.
 .El
 .Sh MULTICHANNEL PLAYBACK
-It is possible to build this driver with multichannel playback capabilites.
+It is possible to build this driver with multichannel playback capabilities.
 If you enable the
 .Dv EMU10KX_MULTICHANNEL
 option in your kernel configuration (or
@@ -138,7 +138,7 @@ mixer control is overall sound volume.
 .It Qq pcm
 mixer control is PCM playback volume.
 It controls only front output
-volume in multichannel mode and all output volume in single chennel mode.
+volume in multichannel mode and all output volume in single channel mode.
 .It Qq rec
 mixer control acts very different on EMU10K1 and other cards.
 On EMU10K1 cards it controls the AC97 codec recording level.
@@ -204,7 +204,7 @@ device driver and this manual page were written by
 .An Yuriy Tsibizov .
 .Sh BUGS
 8kHz/8bit/mono recording does not work.
-8kHz recording was removed from the driver capabilites.
+8kHz recording was removed from the driver capabilities.
 .Pp
 The driver does not detect lost S/PDIF signal and produces noise when S/PDIF
 is not connected and S/PDIF volume is not zero.
diff --git a/share/man/man4/syscons.4 b/share/man/man4/syscons.4
index 88f9bb5..3f6e9ca 100644
--- a/share/man/man4/syscons.4
+++ b/share/man/man4/syscons.4
@@ -288,7 +288,7 @@ It will prevent users from
 entering the kernel debugger (KDB) by pressing the key combination.
 KDB will still be invoked when the kernel panics or hits a break point
 if it is included in the kernel.
-If this option is not defined, this behavior may be controled at runtime
+If this option is not defined, this behavior may be controlled at runtime
 by the
 .Xr sysctl 8
 variable
@@ -297,7 +297,7 @@ variable
 This option disables the ``reboot'' key (by default, it is
 .Dv Ctl-Alt-Del ) ,
 so that the casual user may not accidentally reboot the system.
-If this option is not defined, this behavior may be controled at runtime
+If this option is not defined, this behavior may be controlled at runtime
 by the
 .Xr sysctl 8
 variable
diff --git a/share/man/man4/ubtbcmfw.4 b/share/man/man4/ubtbcmfw.4
index 46aa228..8451c6f 100644
--- a/share/man/man4/ubtbcmfw.4
+++ b/share/man/man4/ubtbcmfw.4
@@ -74,7 +74,7 @@ To perform I/O on a bulk endpoint,
 .Xr write 2
 should be used.
 All I/O operations on a bulk endpoint are unbuffered.
-Outgoing bulk endpoint is always enpoint 2.
+Outgoing bulk endpoint is always endpoint 2.
 .Pp
 The control endpoint (endpoint 0) handles the following
 .Xr ioctl 2