diff options
Diffstat (limited to 'share/man/man8/rc.subr.8')
| -rw-r--r-- | share/man/man8/rc.subr.8 | 881 |
1 files changed, 881 insertions, 0 deletions
diff --git a/share/man/man8/rc.subr.8 b/share/man/man8/rc.subr.8 new file mode 100644 index 0000000..7c3b654 --- /dev/null +++ b/share/man/man8/rc.subr.8 @@ -0,0 +1,881 @@ +.\" $NetBSD: rc.subr.8,v 1.12 2004/01/06 00:52:24 lukem Exp $ +.\" +.\" Copyright (c) 2002-2004 The NetBSD Foundation, Inc. +.\" All rights reserved. +.\" +.\" This code is derived from software contributed to The NetBSD Foundation +.\" by Luke Mewburn. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS +.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED +.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +.\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS +.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +.\" POSSIBILITY OF SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.Dd September 23, 2012 +.Dt RC.SUBR 8 +.Os +.Sh NAME +.Nm rc.subr +.Nd functions used by system shell scripts +.Sh SYNOPSIS +.Bl -item -compact +.It +.Ic .\& Pa /etc/rc.subr +.Pp +.It +.Ic backup_file Ar action Ar file Ar current Ar backup +.It +.Ic checkyesno Ar var +.It +.Ic check_pidfile Ar pidfile Ar procname Op Ar interpreter +.It +.Ic check_process Ar procname Op Ar interpreter +.It +.Ic debug Ar message +.It +.Ic err Ar exitval Ar message +.It +.Ic force_depend Ar name +.It +.Ic info Ar message +.It +.Ic load_kld Oo Fl e Ar regex Oc Oo Fl m Ar module Oc Ar file +.It +.Ic load_rc_config Ar name +.It +.Ic load_rc_config_var Ar name Ar var +.It +.Ic mount_critical_filesystems Ar type +.It +.Ic rc_usage Ar command ... +.It +.Ic reverse_list Ar item ... +.It +.Ic run_rc_command Ar argument +.It +.Ic run_rc_script Ar file Ar argument +.It +.Ic wait_for_pids Op Ar pid ... +.It +.Ic warn Ar message +.El +.Sh DESCRIPTION +The +.Nm +script +contains commonly used shell script functions and variable +definitions which are used by various scripts such as +.Xr rc 8 . +Scripts required by ports in +.Pa /usr/local/etc/rc.d +will also eventually +be rewritten to make use of it. +.Pp +The +.Nm +functions were mostly imported from +.Nx . +.Pp +They are accessed by sourcing +.Pa /etc/rc.subr +into the current shell. +.Pp +The following shell functions are available: +.Bl -tag -width 4n +.It Ic backup_file Ar action file current backup +Make a backup copy of +.Ar file +into +.Ar current . +If the +.Xr rc.conf 5 +variable +.Va backup_uses_rcs +is +.Dq Li YES , +use +.Xr rcs 1 +to archive the previous version of +.Ar current , +otherwise save the previous version of +.Ar current +as +.Ar backup . +.Pp +The +.Ar action +argument +may be one of the following: +.Bl -tag -width ".Cm remove" +.It Cm add +.Ar file +is now being backed up by or possibly re-entered into this backup mechanism. +.Ar current +is created, and if necessary, the +.Xr rcs 1 +files are created as well. +.It Cm update +.Ar file +has changed and needs to be backed up. +If +.Ar current +exists, it is copied to +.Ar backup +or checked into +.Xr rcs 1 +(if the repository file is old), +and then +.Ar file +is copied to +.Ar current . +.It Cm remove +.Ar file +is no longer being tracked by this backup mechanism. +If +.Xr rcs 1 +is being used, an empty file is checked in and +.Ar current +is removed, +otherwise +.Ar current +is moved to +.Ar backup . +.El +.It Ic checkyesno Ar var +Return 0 if +.Ar var +is defined to +.Dq Li YES , +.Dq Li TRUE , +.Dq Li ON , +or +.Ql 1 . +Return 1 if +.Ar var +is defined to +.Dq Li NO , +.Dq Li FALSE , +.Dq Li OFF , +or +.Ql 0 . +Otherwise, warn that +.Ar var +is not set correctly. +The values are case insensitive. +.Sy Note : +.Ar var +should be a variable name, not its value; +.Ic checkyesno +will expand the variable by itself. +.It Ic check_pidfile Ar pidfile procname Op Ar interpreter +Parses the first word of the first line of +.Ar pidfile +for a PID, and ensures that the process with that PID +is running and its first argument matches +.Ar procname . +Prints the matching PID if successful, otherwise nothing. +If +.Ar interpreter +is provided, parse the first line of +.Ar procname , +ensure that the line is of the form: +.Pp +.Dl "#! interpreter [...]" +.Pp +and use +.Ar interpreter +with its optional arguments and +.Ar procname +appended as the process string to search for. +.It Ic check_process Ar procname Op Ar interpreter +Prints the PIDs of any processes that are running with a first +argument that matches +.Ar procname . +.Ar interpreter +is handled as per +.Ic check_pidfile . +.It Ic debug Ar message +Display a debugging message to +.Va stderr , +log it to the system log using +.Xr logger 1 , +and +return to the caller. +The error message consists of the script name +(from +.Va $0 ) , +followed by +.Dq Li ": DEBUG: " , +and then +.Ar message . +This function is intended to be used by developers +as an aid to debugging scripts. +It can be turned on or off +by the +.Xr rc.conf 5 +variable +.Va rc_debug . +.It Ic err Ar exitval message +Display an error message to +.Va stderr , +log it to the system log +using +.Xr logger 1 , +and +.Ic exit +with an exit value of +.Ar exitval . +The error message consists of the script name +(from +.Va $0 ) , +followed by +.Dq Li ": ERROR: " , +and then +.Ar message . +.It Ic force_depend Ar name +Output an advisory message and force the +.Ar name +service to start. +The +.Ar name +argument is the +.Xr basename 1 +component of the path to the script, usually +.Pa /etc/rc.d/name . +If the script fails for any reason it will output a warning +and return with a return value of 1. +If it was successful +it will return 0. +.It Ic info Ar message +Display an informational message to +.Va stdout , +and log it to the system log using +.Xr logger 1 . +The message consists of the script name +(from +.Va $0 ) , +followed by +.Dq Li ": INFO: " , +and then +.Ar message . +The display of this informational output can be +turned on or off by the +.Xr rc.conf 5 +variable +.Va rc_info . +.It Ic load_kld Oo Fl e Ar regex Oc Oo Fl m Ar module Oc Ar file +Load +.Ar file +as a kernel module unless it is already loaded. +For the purpose of checking the module status, +either the exact module name can be specified using +.Fl m , +or an +.Xr egrep 1 +regular expression matching the module name can be supplied via +.Fl e . +By default, the module is assumed to have the same name as +.Ar file , +which is not always the case. +.It Ic load_rc_config Ar name +Source in the configuration files for +.Ar name . +First, +.Pa /etc/rc.conf +is sourced if it has not yet been read in. +Then, +.Pa /etc/rc.conf.d/ Ns Ar name +is sourced if it is an existing file. +The latter may also contain other variable assignments to override +.Ic run_rc_command +arguments defined by the calling script, to provide an easy +mechanism for an administrator to override the behaviour of a given +.Xr rc.d 8 +script without requiring the editing of that script. +.It Ic load_rc_config_var Ar name Ar var +Read the +.Xr rc.conf 5 +variable +.Ar var +for +.Ar name +and set in the current shell, using +.Ic load_rc_config +in a sub-shell to prevent unwanted side effects from other variable +assignments. +.It Ic mount_critical_filesystems Ar type +Go through a list of critical file systems, +as found in the +.Xr rc.conf 5 +variable +.Va critical_filesystems_ Ns Ar type , +mounting each one that +is not currently mounted. +.It Ic rc_usage Ar command ... +Print a usage message for +.Va $0 , +with +.Ar commands +being the list of valid arguments +prefixed by +.Sm off +.Dq Bq Li fast | force | one | quiet . +.Sm on +.It Ic reverse_list Ar item ... +Print the list of +.Ar items +in reverse order. +.It Ic run_rc_command Ar argument +Run the +.Ar argument +method for the current +.Xr rc.d 8 +script, based on the settings of various shell variables. +.Ic run_rc_command +is extremely flexible, and allows fully functional +.Xr rc.d 8 +scripts to be implemented in a small amount of shell code. +.Pp +.Ar argument +is searched for in the list of supported commands, which may be one +of: +.Bl -tag -width ".Cm restart" -offset indent +.It Cm start +Start the service. +This should check that the service is to be started as specified by +.Xr rc.conf 5 . +Also checks if the service is already running and refuses to start if +it is. +This latter check is not performed by standard +.Fx +scripts if the system is starting directly to multi-user mode, to +speed up the boot process. +.It Cm stop +If the service is to be started as specified by +.Xr rc.conf 5 , +stop the service. +This should check that the service is running and complain if it is not. +.It Cm restart +Perform a +.Cm stop +then a +.Cm start . +Defaults to displaying the process ID of the program (if running). +.It Cm enabled +Return 0 if the service is enabled and 1 if it is not. +This command does not print anything. +.It Cm rcvar +Display which +.Xr rc.conf 5 +variables are used to control the startup of the service (if any). +.El +.Pp +If +.Va pidfile +or +.Va procname +is set, also support: +.Bl -tag -width ".Cm restart" -offset indent +.It Cm poll +Wait for the command to exit. +.It Cm status +Show the status of the process. +.El +.Pp +Other supported commands are listed in the optional variable +.Va extra_commands . +.Pp +.Ar argument +may have one of the following prefixes which alters its operation: +.Bl -tag -width ".Li force" -offset indent +.It Li fast +Skip the check for an existing running process, +and sets +.Va rc_fast Ns = Ns Li YES . +.It Li force +Skip the checks for +.Va rcvar +being set to +.Dq Li YES , +and sets +.Va rc_force Ns = Ns Li YES . +This ignores +.Ar argument Ns Va _precmd +returning non-zero, and ignores any of the +.Va required_* +tests failing, and always returns a zero exit status. +.It Li one +Skip the checks for +.Va rcvar +being set to +.Dq Li YES , +but performs all the other prerequisite tests. +.It Li quiet +Inhibits some verbose diagnostics. +Currently, this includes messages +.Qq Starting ${name} +(as checked by +.Ic check_startmsgs +inside +.Nm ) +and errors about usage of services that are not enabled in +.Xr rc.conf 5 . +This prefix also sets +.Va rc_quiet Ns = Ns Li YES . +.Em Please, note: +.Va rc_quiet +is not intended to completely mask all debug and warning messages, +but only certain small classes of them. +.El +.Pp +.Ic run_rc_command +uses the following shell variables to control its behaviour. +Unless otherwise stated, these are optional. +.Bl -tag -width ".Va procname" -offset indent +.It Va name +The name of this script. +This is not optional. +.It Va rcvar +The value of +.Va rcvar +is checked with +.Ic checkyesno +to determine if this method should be run. +.It Va command +Full path to the command. +Not required if +.Ar argument Ns Va _cmd +is defined for each supported keyword. +Can be overridden by +.Va ${name}_program . +.It Va command_args +Optional arguments and/or shell directives for +.Va command . +.It Va command_interpreter +.Va command +is started with: +.Pp +.Dl "#! command_interpreter [...]" +.Pp +which results in its +.Xr ps 1 +command being: +.Pp +.Dl "command_interpreter [...] command" +.Pp +so use that string to find the PID(s) of the running command +rather than +.Va command . +.It Va extra_commands +Extra commands/keywords/arguments supported. +.It Va pidfile +Path to PID file. +Used to determine the PID(s) of the running command. +If +.Va pidfile +is set, use: +.Pp +.Dl "check_pidfile $pidfile $procname" +.Pp +to find the PID. +Otherwise, if +.Va command +is set, use: +.Pp +.Dl "check_process $procname" +.Pp +to find the PID. +.It Va procname +Process name to check for. +Defaults to the value of +.Va command . +.It Va required_dirs +Check for the existence of the listed directories +before running the +.Cm start +method. +.It Va required_files +Check for the readability of the listed files +before running the +.Cm start +method. +.It Va required_modules +Ensure that the listed kernel modules are loaded +before running the +.Cm start +method. +This is done after invoking the commands from +.Va start_precmd +so that the missing modules are not loaded in vain +if the preliminary commands indicate a error condition. +A word in the list can have an optional +.Dq Li : Ns Ar modname +or +.Dq Li ~ Ns Ar pattern +suffix. +The +.Ar modname +or +.Ar pattern +parameter is passed to +.Ic load_kld +through a +.Fl m +or +.Fl e +option, respectively. +See the description of +.Ic load_kld +in this document for details. +.It Va required_vars +Perform +.Ic checkyesno +on each of the list variables +before running the +.Cm start +method. +.It Va ${name}_chdir +Directory to +.Ic cd +to before running +.Va command , +if +.Va ${name}_chroot +is not provided. +.It Va ${name}_chroot +Directory to +.Xr chroot 8 +to before running +.Va command . +Only supported after +.Pa /usr +is mounted. +.It Va ${name}_flags +Arguments to call +.Va command +with. +This is usually set in +.Xr rc.conf 5 , +and not in the +.Xr rc.d 8 +script. +The environment variable +.Sq Ev flags +can be used to override this. +.It Va ${name}_nice +.Xr nice 1 +level to run +.Va command +as. +Only supported after +.Pa /usr +is mounted. +.It Va ${name}_program +Full path to the command. +Overrides +.Va command +if both are set, but has no effect if +.Va command +is unset. +As a rule, +.Va command +should be set in the script while +.Va ${name}_program +should be set in +.Xr rc.conf 5 . +.It Va ${name}_user +User to run +.Va command +as, using +.Xr chroot 8 +if +.Va ${name}_chroot +is set, otherwise +uses +.Xr su 1 . +Only supported after +.Pa /usr +is mounted. +.It Va ${name}_group +Group to run the chrooted +.Va command +as. +.It Va ${name}_groups +Comma separated list of supplementary groups to run the chrooted +.Va command +with. +.It Ar argument Ns Va _cmd +Shell commands which override the default method for +.Ar argument . +.It Ar argument Ns Va _precmd +Shell commands to run just before running +.Ar argument Ns Va _cmd +or the default method for +.Ar argument . +If this returns a non-zero exit code, the main method is not performed. +If the default method is being executed, this check is performed after +the +.Va required_* +checks and process (non-)existence checks. +.It Ar argument Ns Va _postcmd +Shell commands to run if running +.Ar argument Ns Va _cmd +or the default method for +.Ar argument +returned a zero exit code. +.It Va sig_stop +Signal to send the processes to stop in the default +.Cm stop +method. +Defaults to +.Dv SIGTERM . +.It Va sig_reload +Signal to send the processes to reload in the default +.Cm reload +method. +Defaults to +.Dv SIGHUP . +.El +.Pp +For a given method +.Ar argument , +if +.Ar argument Ns Va _cmd +is not defined, then a default method is provided by +.Ic run_rc_command : +.Bl -tag -width ".Sy Argument" -offset indent +.It Sy Argument +.Sy Default method +.It Cm start +If +.Va command +is not running and +.Ic checkyesno Va rcvar +succeeds, start +.Va command . +.It Cm stop +Determine the PIDs of +.Va command +with +.Ic check_pidfile +or +.Ic check_process +(as appropriate), +.Ic kill Va sig_stop +those PIDs, and run +.Ic wait_for_pids +on those PIDs. +.It Cm reload +Similar to +.Cm stop , +except that it uses +.Va sig_reload +instead, and does not run +.Ic wait_for_pids . +Another difference from +.Cm stop +is that +.Cm reload +is not provided by default. +It can be enabled via +.Va extra_commands +if appropriate: +.Pp +.Dl "extra_commands=reload" +.It Cm restart +Runs the +.Cm stop +method, then the +.Cm start +method. +.It Cm status +Show the PID of +.Va command , +or some other script specific status operation. +.It Cm poll +Wait for +.Va command +to exit. +.It Cm rcvar +Display which +.Xr rc.conf 5 +variable is used (if any). +This method always works, even if the appropriate +.Xr rc.conf 5 +variable is set to +.Dq Li NO . +.El +.Pp +The following variables are available to the methods +(such as +.Ar argument Ns Va _cmd ) +as well as after +.Ic run_rc_command +has completed: +.Bl -tag -width ".Va rc_flags" -offset indent +.It Va rc_arg +Argument provided to +.Ic run_rc_command , +after fast and force processing has been performed. +.It Va rc_flags +Flags to start the default command with. +Defaults to +.Va ${name}_flags , +unless overridden by the environment variable +.Sq Ev flags . +This variable may be changed by the +.Ar argument Ns Va _precmd +method. +.It Va rc_pid +PID of +.Va command +(if appropriate). +.It Va rc_fast +Not empty if +.Dq Li fast +prefix was used. +.It Va rc_force +Not empty if +.Dq Li force +prefix was used. +.El +.It Ic run_rc_script Ar file argument +Start the script +.Ar file +with an argument of +.Ar argument , +and handle the return value from the script. +.Pp +Various shell variables are unset before +.Ar file +is started: +.Bd -ragged -offset indent +.Va name , +.Va command , +.Va command_args , +.Va command_interpreter , +.Va extra_commands , +.Va pidfile , +.Va rcvar , +.Va required_dirs , +.Va required_files , +.Va required_vars , +.Ar argument Ns Va _cmd , +.Ar argument Ns Va _precmd . +.Ar argument Ns Va _postcmd . +.Ed +.Pp +The startup behaviour of +.Ar file +depends upon the following checks: +.Bl -enum +.It +If +.Ar file +ends in +.Pa .sh , +it is sourced into the current shell. +.It +If +.Ar file +appears to be a backup or scratch file +(e.g., with a suffix of +.Pa ~ , # , .OLD , +or +.Pa .orig ) , +ignore it. +.It +If +.Ar file +is not executable, ignore it. +.It +If the +.Xr rc.conf 5 +variable +.Va rc_fast_and_loose +is empty, +source +.Ar file +in a sub shell, +otherwise source +.Ar file +into the current shell. +.El +.It Ic stop_boot Op Ar always +Prevent booting to multiuser mode. +If the +.Va autoboot +variable is set to +.Ql yes , +or +.Ic checkyesno Ar always +indicates a truth value, then a +.Dv SIGTERM +signal is sent to the parent +process, which is assumed to be +.Xr rc 8 . +Otherwise, the shell exits with a non-zero status. +.It Ic wait_for_pids Op Ar pid ... +Wait until all of the provided +.Ar pids +do not exist any more, printing the list of outstanding +.Ar pids +every two seconds. +.It Ic warn Ar message +Display a warning message to +.Va stderr +and log it to the system log +using +.Xr logger 1 . +The warning message consists of the script name +(from +.Va $0 ) , +followed by +.Dq Li ": WARNING: " , +and then +.Ar message . +.El +.Sh FILES +.Bl -tag -width ".Pa /etc/rc.subr" -compact +.It Pa /etc/rc.subr +The +.Nm +file resides in +.Pa /etc . +.El +.Sh SEE ALSO +.Xr rc.conf 5 , +.Xr rc 8 +.Sh HISTORY +The +.Nm +script +appeared in +.Nx 1.3 . +The +.Xr rc.d 8 +support functions appeared in +.Nx 1.5 . +The +.Nm +script +first appeared in +.Fx 5.0 . |
