diff options
Diffstat (limited to 'share/man/man4/usb_quirk.4')
-rw-r--r-- | share/man/man4/usb_quirk.4 | 196 |
1 files changed, 196 insertions, 0 deletions
diff --git a/share/man/man4/usb_quirk.4 b/share/man/man4/usb_quirk.4 new file mode 100644 index 0000000..eb45eaa --- /dev/null +++ b/share/man/man4/usb_quirk.4 @@ -0,0 +1,196 @@ +.\" +.\" Copyright (c) 2010 AnyWi Technologies +.\" All rights reserved. +.\" +.\" Permission to use, copy, modify, and distribute this software for any +.\" purpose with or without fee is hereby granted, provided that the above +.\" copyright notice and this permission notice appear in all copies. +.\" +.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF +.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +.\" +.\" $FreeBSD$ +.\" +.Dd April 21, 2013 +.Dt USB_QUIRK 4 +.Os +.Sh NAME +.Nm usb_quirk +.Nd USB quirks module +.Sh SYNOPSIS +To compile this module into the kernel, +place the following line in your +kernel configuration file: +.Bd -ragged -offset indent +.Cd "device usb" +.Ed +.Pp +Alternatively, to load the module at boot +time, place the following line in +.Xr loader.conf 5 : +.Bd -literal -offset indent +usb_quirk_load="YES" +.Ed +.Sh DESCRIPTION +The +.Nm +module provides support for dynamically adding and removing quirks for +USB devices with +.Xr usbconfig 8 . +.Sh General quirks: +.Bl -tag -width Ds +.It UQ_AUDIO_SWAP_LR +swap left and right channels +.It UQ_AU_INP_ASYNC +input is async despite claim of adaptive +.It UQ_AU_NO_FRAC +do not adjust for fractional samples +.It UQ_AU_NO_XU +audio device has broken extension unit +.It UQ_BAD_ADC +bad audio spec version number +.It UQ_BAD_AUDIO +device claims audio class, but is not +.It UQ_BROKEN_BIDIR +printer has broken bidir mode +.It UQ_BUS_POWERED +device is bus powered, despite claim +.It UQ_HID_IGNORE +device should be ignored by hid class +.It UQ_KBD_IGNORE +device should be ignored by kbd class +.It UQ_KBD_BOOTPROTO +device should set the boot protocol +.It UQ_UMS_IGNORE +device should be ignored by ums class +.It UQ_MS_BAD_CLASS +does not identify properly +.It UQ_MS_LEADING_BYTE +mouse sends an unknown leading byte +.It UQ_MS_REVZ +mouse has Z-axis reversed +.It UQ_NO_STRINGS +string descriptors are broken +.It UQ_POWER_CLAIM +hub lies about power status +.It UQ_SPUR_BUT_UP +spurious mouse button up events +.It UQ_SWAP_UNICODE +has some Unicode strings swapped +.It UQ_CFG_INDEX_1 +select configuration index 1 by default +.It UQ_CFG_INDEX_2 +select configuration index 2 by default +.It UQ_CFG_INDEX_3 +select configuration index 3 by default +.It UQ_CFG_INDEX_4 +select configuration index 4 by default +.It UQ_CFG_INDEX_0 +select configuration index 0 by default +.It UQ_ASSUME_CM_OVER_DATA +assume cm over data feature +.El +.Sh USB Mass Storage quirks: +.Bl -tag -width Ds +.It UQ_MSC_NO_TEST_UNIT_READY +send start/stop instead of TUR +.It UQ_MSC_NO_RS_CLEAR_UA +does not reset Unit Att. +.It UQ_MSC_NO_START_STOP +does not support start/stop +.It UQ_MSC_NO_GETMAXLUN +does not support get max LUN +.It UQ_MSC_NO_INQUIRY +fake generic inq response +.It UQ_MSC_NO_INQUIRY_EVPD +does not support inq EVPD +.It UQ_MSC_NO_SYNC_CACHE +does not support sync cache +.It UQ_MSC_SHUTTLE_INIT +requires Shuttle init sequence +.It UQ_MSC_ALT_IFACE_1 +switch to alternate interface 1 +.It UQ_MSC_FLOPPY_SPEED +does floppy speeds (20kb/s) +.It UQ_MSC_IGNORE_RESIDUE +gets residue wrong +.It UQ_MSC_WRONG_CSWSIG +uses wrong CSW signature +.It UQ_MSC_RBC_PAD_TO_12 +pad RBC requests to 12 bytes +.It UQ_MSC_READ_CAP_OFFBY1 +reports sector count, not max sec. +.It UQ_MSC_FORCE_SHORT_INQ +does not support full inq. +.It UQ_MSC_FORCE_WIRE_BBB +force BBB wire protocol +.It UQ_MSC_FORCE_WIRE_CBI +force CBI wire protocol +.It UQ_MSC_FORCE_WIRE_CBI_I +force CBI with int. wire protocol +.It UQ_MSC_FORCE_PROTO_SCSI +force SCSI command protocol +.It UQ_MSC_FORCE_PROTO_ATAPI +force ATAPI command protocol +.It UQ_MSC_FORCE_PROTO_UFI +force UFI command protocol +.It UQ_MSC_FORCE_PROTO_RBC +force RBC command protocol +.El +.Sh 3G Datacard (u3g) quirks: +.Bl -tag -width Ds +.It UQ_MSC_EJECT_HUAWEI +ejects after Huawei USB command +.It UQ_MSC_EJECT_SIERRA +ejects after Sierra USB command +.It UQ_MSC_EJECT_SCSIEJECT +ejects after SCSI eject command +.Dv 0x1b0000000200 +.It UQ_MSC_EJECT_REZERO +ejects after SCSI rezero command +.Dv 0x010000000000 +.It UQ_MSC_EJECT_ZTESTOR +ejects after ZTE SCSI command +.Dv 0x850101011801010101010000 +.It UQ_MSC_EJECT_CMOTECH +ejects after C-motech SCSI command +.Dv 0xff52444556434847 +.It UQ_MSC_EJECT_WAIT +wait for the device to eject +.It UQ_MSC_EJECT_SAEL_M460 +ejects after Sael USB commands +.It UQ_MSC_EJECT_HUAWEISCSI +ejects after Huawei SCSI command +.Dv 0x11060000000000000000000000000000 +.It UQ_MSC_EJECT_TCT +ejects after TCT SCSI command +.Dv 0x06f504025270 +.El +.Pp +See +.Pa /sys/dev/usb/quirk/usb_quirk.h +for the complete list of supported quirks. +.Sh EXAMPLES +After attaching a +.Nm u3g +device which appears as a USB device on +.Pa ugen0.3 : +.Bd -literal -offset indent +usbconfig -d ugen0.3 add_quirk UQ_MSC_EJECT_WAIT +.Ed +.Sh SEE ALSO +.Xr usbconfig 8 +.Sh HISTORY +The +.Nm +module appeared in +.Fx 8.0 , +and was written by +.An Hans Petter Selasky Aq hselasky@FreeBSD.org . +This manual page was written by +.An Nick Hibma Aq n_hibma@FreeBSD.org . |