summaryrefslogtreecommitdiffstats
path: root/share/man/man4/nve.4
diff options
context:
space:
mode:
Diffstat (limited to 'share/man/man4/nve.4')
-rw-r--r--share/man/man4/nve.4150
1 files changed, 0 insertions, 150 deletions
diff --git a/share/man/man4/nve.4 b/share/man/man4/nve.4
deleted file mode 100644
index becade3..0000000
--- a/share/man/man4/nve.4
+++ /dev/null
@@ -1,150 +0,0 @@
-.\" Copyright (c) 2003 Quinton Dolan
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $Id: nvnet.4,v 1.1 2003/10/09 16:48:01 q Exp $
-.\"
-.\" $FreeBSD$
-.\"
-.Dd February 13, 2014
-.Dt NVE 4
-.Os
-.Sh NAME
-.Nm nve
-.Nd "NVIDIA nForce MCP Networking Adapter device driver"
-.Sh SYNOPSIS
-.Sy Warning:
-This driver is deprecated and will not be available in
-.Fx 11.0
-and later.
-Please consider using the
-.Xr nfe 4
-driver instead.
-.Pp
-To compile this driver into the kernel,
-place the following lines in your
-kernel configuration file:
-.Bd -ragged -offset indent
-.Cd "device miibus"
-.Cd "device nve"
-.Ed
-.Pp
-Alternatively, to load the driver as a
-module at boot time, place the following line in
-.Xr loader.conf 5 :
-.Bd -literal -offset indent
-if_nve_load="YES"
-.Ed
-.Sh DESCRIPTION
-The
-.Nm
-driver provides support for the NVIDIA nForce MCP and nForce2 MCP2
-networking adapter that is embedded in the southbridge of most
-nForce and nForce2 motherboards.
-.Pp
-This driver is a reimplementation of the NVIDIA supported Linux
-.Nm nvnet
-driver and uses the same closed source API library to access
-the underlying hardware.
-There is currently no programming documentation available for this
-device, and therefore little is known about the internal architecture
-of the MAC engine itself.
-.Pp
-The
-.Nm
-driver supports the following media types:
-.Bl -tag -width ".Cm 10baseT/UTP"
-.It Cm autoselect
-Enable autoselection of the media type and options.
-.It Cm 10baseT/UTP
-Set 10Mbps operation.
-.It Cm 100baseTX
-Set 100Mbps (Fast Ethernet) operation.
-.It Cm 1000baseTX
-Set 1000Mbps (Gigabit Ethernet) operation.
-.El
-.Pp
-The
-.Nm
-driver supports the following media options:
-.Bl -tag -width ".Cm 10baseT/UTP"
-.It Cm full-duplex
-Set full duplex operation.
-.El
-.Pp
-For more information on configuring this device, see
-.Xr ifconfig 8 .
-.Sh HARDWARE
-The
-.Nm
-driver supports the NVIDIA MCP onboard adapters of mainboards with
-the following chipsets:
-.Pp
-.Bl -bullet -compact
-.It
-nForce
-.It
-nForce2
-.It
-nForce3
-.It
-nForce4
-.El
-.Sh DIAGNOSTICS
-.Bl -diag
-.It "nve%d: couldn't map memory"
-A fatal initialization error has occurred.
-.It "nve%d: couldn't map interrupt"
-A fatal initialization error has occurred.
-.It "nve%d: failed to allocate memory"
-There are not enough mbufs available for allocation.
-.It "nve%d: device timeout"
-The device has stopped responding to the network, or there is a problem with
-the network connection (cable).
-.El
-.Sh SEE ALSO
-.Xr altq 4 ,
-.Xr arp 4 ,
-.Xr miibus 4 ,
-.Xr netintro 4 ,
-.Xr nfe 4 ,
-.Xr ng_ether 4 ,
-.Xr rgephy 4 ,
-.Xr ifconfig 8
-.Sh HISTORY
-The
-.Nm
-driver first appeared in
-.Fx 6.0 .
-.Sh AUTHORS
-.An -nosplit
-The
-.Nm
-driver was written by
-.An Quinton Dolan Aq q@onthenet.com.au
-and
-.An "David E. O'Brien" Aq obrien@FreeBSD.org .
-.Sh BUGS
-There are reports that when the card is in auto select mode,
-ifconfig output reports a 10baseT/UTP output while the LEDs and
-bandwidth show that the card is actually in 100baseTX mode.
OpenPOWER on IntegriCloud