diff options
Diffstat (limited to 'share/man/man4/netgraph.4')
-rw-r--r-- | share/man/man4/netgraph.4 | 876 |
1 files changed, 876 insertions, 0 deletions
diff --git a/share/man/man4/netgraph.4 b/share/man/man4/netgraph.4 new file mode 100644 index 0000000..c90650e0 --- /dev/null +++ b/share/man/man4/netgraph.4 @@ -0,0 +1,876 @@ +.\" Copyright (c) 1996-1999 Whistle Communications, Inc. +.\" All rights reserved. +.\" +.\" Subject to the following obligations and disclaimer of warranty, use and +.\" redistribution of this software, in source or object code forms, with or +.\" without modifications are expressly permitted by Whistle Communications; +.\" provided, however, that: +.\" 1. Any and all reproductions of the source or object code must include the +.\" copyright notice above and the following disclaimer of warranties; and +.\" 2. No rights are granted, in any manner or form, to use Whistle +.\" Communications, Inc. trademarks, including the mark "WHISTLE +.\" COMMUNICATIONS" on advertising, endorsements, or otherwise except as +.\" such appears in the above copyright notice or in the software. +.\" +.\" THIS SOFTWARE IS BEING PROVIDED BY WHISTLE COMMUNICATIONS "AS IS", AND +.\" TO THE MAXIMUM EXTENT PERMITTED BY LAW, WHISTLE COMMUNICATIONS MAKES NO +.\" REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, REGARDING THIS SOFTWARE, +.\" INCLUDING WITHOUT LIMITATION, ANY AND ALL IMPLIED WARRANTIES OF +.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. +.\" WHISTLE COMMUNICATIONS DOES NOT WARRANT, GUARANTEE, OR MAKE ANY +.\" REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THE USE OF THIS +.\" SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE. +.\" IN NO EVENT SHALL WHISTLE COMMUNICATIONS BE LIABLE FOR ANY DAMAGES +.\" RESULTING FROM OR ARISING OUT OF ANY USE OF THIS SOFTWARE, INCLUDING +.\" WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, +.\" PUNITIVE, OR CONSEQUENTIAL DAMAGES, PROCUREMENT OF SUBSTITUTE GOODS OR +.\" SERVICES, LOSS OF USE, DATA OR PROFITS, HOWEVER CAUSED AND UNDER ANY +.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF +.\" THIS SOFTWARE, EVEN IF WHISTLE COMMUNICATIONS IS ADVISED OF THE POSSIBILITY +.\" OF SUCH DAMAGE. +.\" +.\" Authors: Julian Elischer <julian@whistle.com> +.\" Archie Cobbs <archie@whistle.com> +.\" +.\" $FreeBSD$ +.\" $Whistle: netgraph.4,v 1.7 1999/01/28 23:54:52 julian Exp $ +.\" +.Dd January 19, 1999 +.Dt NETGRAPH 4 +.Os FreeBSD +.Sh NAME +.Nm netgraph +.Nd graph based kernel networking subsystem +.Sh DESCRIPTION +The +.Nm +system provides a uniform and modular system for the implementation +of kernel objects which perform various networking functions. The objects, +known as +.Em nodes , +can be arranged into arbitrarily complicated graphs. Nodes have +.Em hooks +which are used to connect two nodes together, forming the edges in the graph. +Nodes communicate along the edges to process data, implement protocols, etc. +.Pp +The aim of +.Nm +is to supplement rather than replace the existing kernel networking +infrastructure. It provides: +.Pp +.Bl -bullet -compact -offset 2n +.It +A flexible way of combining protocol and link level drivers +.It +A modular way to implement new protocols +.It +A common framework for kernel entities to inter-communicate +.It +A reasonably fast, kernel-based implementation +.El +.Sh Nodes and Types +The most fundamental concept in +.Nm +is that of a +.Em node . +All nodes implement a number of predefined methods which allow them +to interact with other nodes in a well defined manner. +.Pp +Each node has a +.Em type , +which is a static property of the node determined at node creation time. +A node's type is described by a unique ASCII type name. +The type implies what the node does and how it may be connected +to other nodes. +.Pp +In object-oriented language, types are classes and nodes are instances +of their respective class. All node types are subclasses of the generic node +type, and hence inherit certain common functionality and capabilities +(e.g., the ability to have an ASCII name). +.Pp +Nodes may be assigned a globally unique ASCII name which can be +used to refer to the node. +The name must not contain the characters ``.'' or ``:'' and is limited to +.Dv "NG_NODELEN + 1" +characters (including NUL byte). +.Pp +Each node instance has a unique +.Em ID number +which is expressed as a 32-bit hex value. This value may be used to +refer to a node when there is no ASCII name assigned to it. +.Sh Hooks +Nodes are connected to other nodes by connecting a pair of +.Em hooks , +one from each node. Data flows bidirectionally between nodes along +connected pairs of hooks. A node may have as many hooks as it +needs, and may assign whatever meaning it wants to a hook. +.Pp +Hooks have these properties: +.Pp +.Bl -bullet -compact -offset 2n +.It +A hook has an ASCII name which is unique among all hooks +on that node (other hooks on other nodes may have the same name). +The name must not contain a ``.'' or a ``:'' and is +limited to +.Dv "NG_HOOKLEN + 1" +characters (including NUL byte). +.It +A hook is always connected to another hook. That is, hooks are +created at the time they are connected, and breaking an edge by +removing either hook destroys both hooks. +.El +.Pp +A node may decide to assign special meaning to some hooks. +For example, connecting to the hook named ``debug'' might trigger +the node to start sending debugging information to that hook. +.Sh Data Flow +Two types of information flow between nodes: data messages and +control messages. Data messages are passed in mbuf chains along the edges +in the graph, one edge at a time. The first mbuf in a chain must have the +.Dv M_PKTHDR +flag set. Each node decides how to handle data coming in on its hooks. +.Pp +Control messages are type-specific structures sent from one node directly +to an arbitrary other node. There are two ways to address such a message. If +there is a sequence of edges connecting the two nodes, the message +may be ``source routed'' by specifying the corresponding sequence +of hooks as the destination address for the message (relative +addressing). Otherwise, the recipient node global ASCII name +(or equivalent ID based name) is used as the destination address +for the message (absolute addressing). The two types of addressing +may be combined, by specifying an absolute start node and a sequence +of hooks. +.Pp +Messages often represent commands that are followed by a reply message +in the reverse direction. To facilitate this, the recipient of a +control message is supplied with a ``return address'' that is suitable +for addressing a reply. +.Pp +Each control message contains a 32 bit value called a +.Em typecookie +indicating the type of the message, i.e., how to interpret it. +Typically each type defines a unique typecookie for the messages +that it understands. However, a node may choose to recognize and +implement more than one type of message. +.Sh Netgraph is Functional +In order to minimize latency, most +.Nm netgraph +operations are functional. +That is, data and control messages are delivered by making function +calls rather than by using queues and mailboxes. For example, if node +A wishes to send a data mbuf to neighboring node B, it calls the +generic +.Nm +data delivery function. This function in turn locates +node B and calls B's ``receive data'' method. While this mode of operation +results in good performance, it has a few implications for node +developers: +.Pp +.Bl -bullet -compact -offset 2n +.It +Whenever a node delivers a data or control message, the node +may need to allow for the possibility of receiving a returning message +before the original delivery function call returns. +.It +Netgraph nodes and support routines generally run at +.Dv "splnet()" . +However, some nodes may want to send data and control messages +from a different priority level. Netgraph supplies queueing routines which +utilize the NETISR system to move message delivery to +.Dv "splnet()" . +Note that messages are always received at +.Dv "splnet()" . +.It +It's possible for an infinite loop to occur if the graph contains cycles. +.El +.Pp +So far, these issues have not proven problematical in practice. +.Sh Interaction With Other Parts of the Kernel +A node may have a hidden interaction with other components of the +kernel outside of the +.Nm +subsystem, such as device hardware, +kernel protocol stacks, etc. In fact, one of the benefits of +.Nm +is the ability to join disparate kernel networking entities together in a +consistent communication framework. +.Pp +An example is the node type +.Em socket +which is both a netgraph node and a +.Xr socket 2 +BSD socket in the protocol family +.Dv PF_NETGRAPH . +Socket nodes allow user processes to participate in +.Nm netgraph . +Other nodes communicate with socket nodes using the usual methods, and the +node hides the fact that it is also passing information to and from a +cooperating user process. +.Pp +Another example is a device driver that presents +a node interface to the hardware. +.Sh Node Methods +Nodes are notified of the following actions via function calls +to the following node methods (all at +.Dv "splnet()" ) +and may accept or reject that action (by returning the appropriate +error code): +.Bl -tag -width xxx +.It Creation of a new node +The constructor for the type is called. If creation of a new node is +allowed, the constructor must call the generic node creation +function (in object-oriented terms, the superclass constructor) +and then allocate any special resources it needs. For nodes that +correspond to hardware, this is typically done during the device +attach routine. Often a global ASCII name corresponding to the +device name is assigned here as well. +.It Creation of a new hook +The hook is created and tentatively +linked to the node, and the node is told about the name that will be +used to describe this hook. The node sets up any special data structures +it needs, or may reject the connection, based on the name of the hook. +.It Successful connection of two hooks +After both ends have accepted their +hooks, and the links have been made, the nodes get a chance to +find out who their peer is across the link and can then decide to reject +the connection. Tear-down is automatic. +.It Destruction of a hook +The node is notified of a broken connection. The node may consider some hooks +to be critical to operation and others to be expendable: the disconnection +of one hook may be an acceptable event while for another it +may effect a total shutdown for the node. +.It Shutdown of a node +This method allows a node to clean up +and to ensure that any actions that need to be performed +at this time are taken. The method must call the generic (i.e., superclass) +node destructor to get rid of the generic components of the node. +Some nodes (usually associated with a piece of hardware) may be +.Em persistent +in that a shutdown breaks all edges and resets the node, +but doesn't remove it, in which case the generic destructor is not called. +.El +.Sh Sending and Receiving Data +Three other methods are also supported by all nodes: +.Bl -tag -width xxx +.It Receive data message +An mbuf chain is passed to the node. +The node is notified on which hook the data arrived, +and can use this information in its processing decision. +The node must must always +.Dv m_freem() +the mbuf chain on completion or error, or pass it on to another node +(or kernel module) which will then be responsible for freeing it. +.Pp +In addition to the mbuf chain itself there is also a pointer to a +structure describing meta-data about the message +(e.g. priority information). This pointer may be +.Dv NULL +if there is no additional information. The format for this information is +described in +.Dv netgraph.h . +The memory for meta-data must allocated via +.Dv malloc() +with type +.Dv M_NETGRAPH . +As with the data itself, it is the receiver's responsibility to +.Dv free() +the meta-data. If the mbuf chain is freed the meta-data must +be freed at the same time. If the meta-data is freed but the +real data on is passed on, then a +.Dv NULL +pointer must be substituted. +.Pp +The receiving node may decide to defer the data by queueing it in the +.Nm +NETISR system (see below). +.Pp +The structure and use of meta-data is still experimental, but is presently used in +frame-relay to indicate that management packets should be queued for transmission +at a higher priority than data packets. This is required for +conformance with Frame Relay standards. +.Pp +.It Receive queued data message +Usually this will be the same function as +.Em Receive data message. +This is the entry point called when a data message is being handed to +the node after having been queued in the NETISR system. +This allows a node to decide in the +.Em Receive data message +method that a message should be defered and queued, +and be sure that when it is processed from the queue, +it will not be queued again. +.It Receive control message +This method is called when a control message is addressed to the node. +A return address is always supplied, giving the address of the node +that originated the message so a reply message can be sent anytime later. +.Pp +It is possible for a synchronous reply to be made, and in fact this +is more common in practice. +This is done by setting a pointer (supplied as an extra function parameter) +to point to the reply. +Then when the control message delivery function returns, +the caller can check if this pointer has been made non-NULL, +and if so then it points to the reply message allocated via +.Dv malloc() +and containing the synchronous response. In both directions, +(request and response) it is up to the +receiver of that message to +.Dv free() +the control message buffer. All control messages and replies are +allocated with +.Dv malloc() +type +.Dv M_NETGRAPH . +.El +.Pp +Much use has been made of reference counts, so that nodes being +free'd of all references are automatically freed, and this behaviour +has been tested and debugged to present a consistent and trustworthy +framework for the ``type module'' writer to use. +.Sh Addressing +The +.Nm +framework provides an unambiguous and simple to use method of specifically +addressing any single node in the graph. The naming of a node is +independent of its type, in that another node, or external component +need not know anything about the node's type in order to address it so as +to send it a generic message type. Node and hook names should be +chosen so as to make addresses meaningful. +.Pp +Addresses are either absolute or relative. An absolute address begins +with a node name, (or ID), followed by a colon, followed by a sequence of hook +names separated by periods. This addresses the node reached by starting +at the named node and following the specified sequence of hooks. +A relative address includes only the sequence of hook names, implicitly +starting hook traversal at the local node. +.Pp +There are a couple of special possibilities for the node name. +The name ``.'' (refered to as ``.:'') always refers to the local node. +Also, nodes that have no global name may be addressed by their ID numbers, +by enclosing the hex representation of the ID number within square brackets. +Here are some examples of valid netgraph addresses: +.Bd -literal -offset 4n -compact + + .: + foo: + .:hook1 + foo:hook1.hook2 + [f057cd80]:hook1 +.Ed +.Pp +Consider the following set of nodes might be created for a site with +a single physical frame relay line having two active logical DLCI channels, +with RFC-1490 frames on DLCI 16 and PPP frames over DLCI 20: +.Pp +.Bd -literal +[type SYNC ] [type FRAME] [type RFC1490] +[ "Frame1" ](uplink)<-->(data)[<un-named>](dlci16)<-->(mux)[<un-named> ] +[ A ] [ B ](dlci20)<---+ [ C ] + | + | [ type PPP ] + +>(mux)[<un-named>] + [ D ] +.Ed +.Pp +One could always send a control message to node C from anywhere +by using the name +.Em "Frame1:uplink.dlci16" . +Similarly, +.Em "Frame1:uplink.dlci20" +could reliably be used to reach node D, and node A could refer +to node B as +.Em ".:uplink" , +or simply +.Em "uplink" . +Conversely, B can refer to A as +.Em "data" . +The address +.Em "mux.data" +could be used by both nodes C and D to address a message to node A. +.Pp +Note that this is only for +.Em control messages . +Data messages are routed one hop at a time, by specifying the departing +hook, with each node making the next routing decision. So when B +receives a frame on hook +.Em data +it decodes the frame relay header to determine the DLCI, +and then forwards the unwrapped frame to either C or D. +.Pp +A similar graph might be used to represent multi-link PPP running +over an ISDN line: +.Pp +.Bd -literal +[ type BRI ](B1)<--->(link1)[ type MPP ] +[ "ISDN1" ](B2)<--->(link2)[ (no name) ] +[ ](D) <-+ + | + +----------------+ + | + +->(switch)[ type Q.921 ](term1)<---->(datalink)[ type Q.931 ] + [ (no name) ] [ (no name) ] +.Ed +.Sh Netgraph Structures +Interesting members of the node and hook structures are shown below: +.Bd -literal +struct ng_node { + char *name; /* Optional globally unique name */ + void *private; /* Node implementation private info */ + struct ng_type *type; /* The type of this node */ + int refs; /* Number of references to this struct */ + int numhooks; /* Number of connected hooks */ + hook_p hooks; /* Linked list of (connected) hooks */ +}; +typedef struct ng_node *node_p; + +struct ng_hook { + char *name; /* This node's name for this hook */ + void *private; /* Node implementation private info */ + int refs; /* Number of references to this struct */ + struct ng_node *node; /* The node this hook is attached to */ + struct ng_hook *peer; /* The other hook in this connected pair */ + struct ng_hook *next; /* Next in list of hooks for this node */ +}; +typedef struct ng_hook *hook_p; +.Ed +.Pp +The maintenance of the name pointers, reference counts, and linked list +of hooks for each node is handled automatically by the +.Nm +subsystem. +Typically a node's private info contains a back-pointer to the node or hook +structure, which counts as a new reference that must be registered by +incrementing +.Dv "node->refs" . +.Pp +From a hook you can obtain the corresponding node, and from +a node the list of all active hooks. +.Pp +Node types are described by this structure: +.Bd -literal +struct ng_type { + u_int32_t version; /* Must equal NG_VERSION */ + const char *name; /* Unique type name */ + + /* Module event handler */ + modeventhand_t mod_event; /* Handle load/unload (optional) */ + + /* Constructor */ + int (*constructor)(node_p *node); /* Create a new node */ + + /** Methods using the node **/ + int (*rcvmsg)(node_p node, /* Receive control message */ + struct ng_mesg *msg, /* The message */ + const char *retaddr, /* Return address */ + struct ng_mesg **resp); /* Synchronous response */ + int (*shutdown)(node_p node); /* Shutdown this node */ + int (*newhook)(node_p node, /* create a new hook */ + hook_p hook, /* Pre-allocated struct */ + const char *name); /* Name for new hook */ + + /** Methods using the hook **/ + int (*connect)(hook_p hook); /* Confirm new hook attachment */ + int (*rcvdata)(hook_p hook, /* Receive data on a hook */ + struct mbuf *m, /* The data in an mbuf */ + meta_p meta); /* Meta-data, if any */ + int (*disconnect)(hook_p hook); /* Notify disconnection of hook */ +}; +.Ed +.Pp +Control messages have the following structure: +.Bd -literal +#define NG_CMDSTRLEN 15 /* Max command string (16 with null) */ + +struct ng_mesg { + struct ng_msghdr { + u_char version; /* Must equal NG_VERSION */ + u_char spare; /* Pad to 2 bytes */ + u_short arglen; /* Length of cmd/resp data */ + u_long flags; /* Message status flags */ + u_long token; /* Reply should have the same token */ + u_long typecookie; /* Node type understanding this message */ + u_long cmd; /* Command identifier */ + u_char cmdstr[NG_CMDSTRLEN+1]; /* Cmd string (for debug) */ + } header; + char data[0]; /* Start of cmd/resp data */ +}; + +#define NG_VERSION 1 /* Netgraph version */ +#define NGF_ORIG 0x0000 /* Command */ +#define NGF_RESP 0x0001 /* Response */ +.Ed +.Pp +Control messages have the fixed header shown above, followed by a +variable length data section which depends on the type cookie +and the command. Each field is explained below: +.Bl -tag -width xxx +.It Dv version +Indicates the version of netgraph itself. The current version is +.Dv NG_VERSION . +.It Dv arglen +This is the length of any extra arguments, which begin at +.Dv data . +.It Dv flags +Indicates whether this is a command or a response control message. +.It Dv token +The +.Dv token +is a means by which a sender can match a reply message to the +corresponding command message; the reply always has the same token. +.Pp +.It Dv typecookie +The corresponding node type's unique 32-bit value. +If a node doesn't recognize the type cookie it must reject the message +by returning +.Er EINVAL . +.Pp +Each type should have an include file that defines the commands, +argument format, and cookie for its own messages. +The typecookie +insures that the same header file was included by both sender and +receiver; when an incompatible change in the header file is made, +the typecookie +.Em must +be changed. +The de facto method for generating unique type cookies is to take the +seconds from the epoch at the time the header file is written +(i.e., the output of +.Dv "date -u +'%s'" ")." +.Pp +There is a predefined typecookie +.Dv NGM_GENERIC_COOKIE +for the ``generic'' node type, and +a corresponding set of generic messages which all nodes understand. +The handling of these messages is automatic. +.It Dv command +The identifier for the message command. This is type specific, +and is defined in the same header file as the typecookie. +.It Dv cmdstr +Room for a short human readable version of ``command'' (for debugging +purposes only). +.El +.Pp +Some modules may choose to implement messages from more than one +of the header files and thus recognize more than one type cookie. +.Sh Generic Control Messages +There are a number of standard predefined messages that will work +for any node, as they are supported directly by the framework itself. +These are defined in +.Dv ng_message.h +along with the basic layout of messages and other similar information. +.Bl -tag -width xxx +.It Dv NGM_CONNECT +Connect to another node, using the supplied hook names on either end. +.It Dv NGM_MKPEER +Construct a node of the given type and then connect to it using the +supplied hook names. +.It Dv NGM_SHUTDOWN +The target node should disconnect from all its neighbours and shut down. +Persistent nodes such as those representing physical hardware +might not dissappear from the node namespace, but only reset themselves. +The node must disconnect all of its hooks. +This may result in neighbors shutting themselves down, and possibly a +cascading shutdown of the entire connected graph. +.It Dv NGM_NAME +Assign a name to a node. Nodes can exist without having a name, and this +is the default for nodes created using the +.Dv NGM_MKPEER +method. Such nodes can only be addressed relatively or by their ID number. +.It Dv NGM_RMHOOK +Ask the node to break a hook connection to one of its neighbours. +Both nodes will have their ``disconnect'' method invoked. +Either node may elect to totally shut down as a result. +.It Dv NGM_NODEINFO +Asks the target node to describe itself. The four returned fields +are the node name (if named), the node type, the node ID and the +number of hooks attached. The ID is an internal number unique to that node. +.It Dv NGM_LISTHOOKS +This returns the information given by +.Dv NGM_NODEINFO , +but in addition +includes an array of fields describing each link, and the desription for +the node at the far end of that link. +.It Dv NGM_LISTNAMES +This returns an array of node descriptions (as for +.Dv NGM_NODEINFO ")" +where each entry of the array describes a named node. +All named nodes will be described. +.It Dv NGM_LISTNODES +This is the same as +.Dv NGM_LISTNAMES +except that all nodes are listed regardless of whether they have a name or not. +.It Dv NGM_LISTTYPES +This returns a list of all currently installed netgraph types. +.It Dv NGM_TEXT_STATUS +The node may return a text formatted status message. +The status information is determined entirely by the node type. +It is the only "generic" message +that requires any support within the node itself and as such the node may +elect to not support this message. The text response must be less than +.Dv NG_TEXTRESPONSE +bytes in length (presently 1024). This can be used to return general +status information in human readable form. +.El +.Sh Metadata +Data moving through the +.Nm +system can be accompanied by meta-data that describes some +aspect of that data. The form of the meta-data is a fixed header, +which contains enough information for most uses, and can optionally +be suplemented by trailing +.Em option +structures, which contain a +.Em cookie +(see the section on control messages), an identifier, a length and optional +data. If a node does not recognize the cookie associated with an option, +it should ignore that option. +.Pp +Meta data might include such things as priority, discard eligibility, +or special processing requirements. It might also mark a packet for +debug status, etc. The use of meta-data is still experimental. +.Sh INITIALIZATION +The base +.Nm +code may either be statically compiled +into the kernel or else loaded dynamically as a KLD via +.Xr kldload 8 . +In the former case, include +.Bd -literal -offset 4n -compact + + options NETGRAPH + +.Ed +in your kernel configuration file. You may also include selected +node types in the kernel compilation, for example: +.Bd -literal -offset 4n -compact + + options NETGRAPH + options NETGRAPH_SOCKET + options NETGRAPH_ECHO + +.Ed +.Pp +Once the +.Nm +subsystem is loaded, individual node types may be loaded at any time +as KLD modules via +.Xr kldload 8 . +Moreover, +.Nm +knows how to automatically do this; when a request to create a new +node of unknown type +.Em type +is made, +.Nm +will attempt to load the KLD module +.Dv ng_type.ko . +.Pp +Types can also be installed at boot time, as certain device drivers +may want to export each instance of the device as a netgraph node. +.Pp +In general, new types can be installed at any time from within the +kernel by calling +.Dv ng_newtype() , +supplying a pointer to the type's +.Dv struct ng_type +structure. +.Pp +The +.Dv "NETGRAPH_INIT()" +macro automates this process by using a linker set. +.Sh EXISTING NODE TYPES +Several node types currently exist. Each is fully documented +in its own man page: +.Bl -tag -width xxx +.It SOCKET +The socket type implements two new sockets in the new protocol domain +.Dv PF_NETGRAPH . +The new sockets protocols are +.Dv NG_DATA +and +.Dv NG_CONTROL , +both of type +.Dv SOCK_DGRAM . +Typically one of each is associated with a socket node. +When both sockets have closed, the node will shut down. The +.Dv NG_DATA +socket is used for sending and receiving data, while the +.Dv NG_CONTROL +socket is used for sending and receiving control messages. +Data and control messages are passed using the +.Xr sendto 2 +and +.Xr recvfrom 2 +calls, using a +.Dv struct sockaddr_ng +socket address. +.Pp +.It HOLE +Responds only to generic messages and is a ``black hole'' for data, +Useful for testing. Always accepts new hooks. +.Pp +.It ECHO +Responds only to generic messages and always echoes data back through the +hook from which it arrived. Returns any non generic messages as their +own response. Useful for testing. Always accepts new hooks. +.Pp +.It TEE +This node is useful for ``snooping.'' It has 4 hooks: +.Dv left , +.Dv right , +.Dv left2right , +and +.Dv right2left . +Data entering from the right is passed to the left and duplicated on +.Dv right2left, +and data entering from the left is passed to the right and +duplicated on +.Dv left2right . +Data entering from +.Dv left2right +is sent to the right and data from +.Dv right2left +to left. +.Pp +.It RFC1490 MUX +Encapsulates/de-encapsulates frames encoded according to RFC 1490. +Has a hook for the encapsulated packets (``downstream'') and one hook +for each protocol (i.e., IP, PPP, etc.). +.Pp +.It FRAME RELAY MUX +Encapsulates/de-encapsulates Frame Relay frames. +Has a hook for the encapsulated packets (``downstream'') and one hook +for each DLCI. +.Pp +.It FRAME RELAY LMI +Automatically handles frame relay +``LMI'' (link management interface) operations and packets. +Automatically probes and detects whch of several LMI standards +is in use at the exchange. +.Pp +.It TTY +This node is also a line discipline. It simply converts between mbuf +frames and sequential serial data, allowing a tty to appear as a netgraph +node. It has a programmable ``hotkey'' character. +.Pp +.It ASYNC +This node encapsulates and de-encapsulates asynchronous frames +according to RFC 1662. This is used in conjunction with the TTY node +type for supporting PPP links over asynchronous serial lines. +.Pp +.It INTERFACE +This node is also a system networking interface. It has hooks representing +each protocol family (IP, AppleTalk, IPX, etc.) and appears in the output of +.Xr ifconfig 8 . +The interfaces are named +.Em ng0 , +.Em ng1 , +etc. +.El +.Sh NOTES +Whether a named node exists can be checked by trying to send a control mesage +to it (e.g., +.Dv NGM_NODEINFO +). +If it does not exist, +.Er ENOENT +will be returned. +.Pp +All data messages are mbuf chains with the M_PKTHDR flag set. +.Pp +Nodes are responsible for freeing what they allocate. +There are three exceptions: +.Bl -tag -width xxxx +.It 1 +Mbufs sent across a data link are never to be freed by the sender. +.It 2 +Any meta-data information travelling with the data has the same restriction. +It might be freed by any node the data passes through, and a +.Dv NULL +passed onwards, but the caller will never free it. +Two macros +.Dv "NG_FREE_META(meta)" +and +.Dv "NG_FREE_DATA(m, meta)" +should be used if possible to free data and meta data (see +.Dv netgraph.h ")." +.It 3 +Messages sent using +.Dv ng_send_message() +are freed by the callee. As in the case above, the addresses +associated with the message are freed by whatever allocated them so the +recipient should copy them if it wants to keep that information. +.El +.Sh FILES +.Bl -tag -width xxxxx -compact +.It Pa /sys/netgraph/netgraph.h +Definitions for use soley within the kernel by +.Nm +nodes. +.It Pa /sys/netgraph/ng_message.h +Definitions needed by any file that needs to deal with +.Nm +messages. +.It Pa /sys/netgraph/ng_socket.h +Definitions needed to use +.Nm +socket type nodes. +.It Pa /sys/netgraph/ng_{type}.h +Definitions needed to use +.Nm +{type} +nodes, including the type cookie definition. +.It Pa /modules/netgraph.ko +Netgraph subsystem loadable KLD module. +.It Pa /modules/ng_{type}.ko +Loadable KLD module for node type {type}. +.El +.Sh USER MODE SUPPORT +There is a library for supporting user-mode programs that wish +to interact with the netgraph system. See +.Xr netgraph 3 +for details. +.Pp +Two user-mode support programs, +.Xr ngctl 8 +and +.Xr nghook 8 , +are available to assist manual configuration and debugging. +.Pp +There are a few useful techniques for debugging new node types. +First, implementing new node types in user-mode first +makes debugging easier. +The +.Em tee +node type is also useful for debugging, especially in conjunction with +.Xr ngctl 8 +and +.Xr nghook 8 . +.Sh SEE ALSO +.Xr socket 2 , +.Xr netgraph 3 , +.Xr ngctl 8 , +.Xr nghook 8 , +.Xr ng_async 8 . +.Xr ng_cisco 8 . +.Xr ng_echo 8 . +.Xr ng_frame_relay 8 . +.Xr ng_hole 8 . +.Xr ng_iface 8 . +.Xr ng_lmi 8 . +.Xr ng_rfc1490 8 . +.Xr ng_socket 8 . +.Xr ng_tee 8 . +.Xr ng_tty 8 . +.Xr ng_UI 8 . +.Xr ng_{type} 8 . +.Sh HISTORY +The +.Nm +system was designed and first implemented at Whistle Communications, Inc. +in a version FreeBSD 2.2 customized for the Whistle InterJet. +.Sh AUTHORS +Julian Elischer <julian@whistle.com>, with contributions by +Archie Cobbs <archie@whistle.com>. |