15 files changed, 0 insertions, 24 deletions
diff --git a/share/man/man4/man4.i386/ar.4 b/share/man/man4/man4.i386/ar.4
index 6d75828..2a27081 100644
--- a/share/man/man4/man4.i386/ar.4
+++ b/share/man/man4/man4.i386/ar.4
@@ -69,7 +69,6 @@ start at ar2.
 The card only supports IRQ 3, 5, 7, 10, 11, 12 and 15.
 .Pp
 The iomem area is a 16Kb block and must start at a 16Kb boundary.
-.Pp
 .Sh NETGRAPH SUPPORT
 If the kernel is compiled with
 .Dv "options NETGRAPH"
diff --git a/share/man/man4/man4.i386/ep.4 b/share/man/man4/man4.i386/ep.4
index b186f1a..5a4add8 100644
--- a/share/man/man4/man4.i386/ep.4
+++ b/share/man/man4/man4.i386/ep.4
@@ -73,7 +73,6 @@ Use the UTP port.
 .Pp
 If there are multiple cards in the computer, they are searched for
 in the following order: bus, slot, then ethernet address.
-.Pp
 .Sh NOTES
 The 3c509 card has no jumpers to set the address.
 3Com supplies software to set the address of the card in software.
diff --git a/share/man/man4/man4.i386/ex.4 b/share/man/man4/man4.i386/ex.4
index 718bdc2..4af46f9 100644
--- a/share/man/man4/man4.i386/ex.4
+++ b/share/man/man4/man4.i386/ex.4
@@ -43,7 +43,6 @@ If the port start address isn't found, the card will be searched for in the
 I/O address range 0x200 - 0x3a0.  If the IRQ isn't specified, it will be
 read from the EEPROM on the card.  For correct operation on newer
 cards the Plug-N-Play support should be disabled.
-.Pp
 .Sh DIAGNOSTICS
 .Bl -diag
 .It "ex%d: Intel EtherExpress Pro/10, address %6D, connector %s"
@@ -55,10 +54,8 @@ interrupt than the one specified in the kernel configuration file.
 .It "ex%d: invalid IRQ."
 The device probe detected an invalid IRQ setting.
 .El
-.Pp
 .Sh BUGS
 Currently the driver does not support multicast.
-.Pp
 .Sh SEE ALSO
 .Xr arp 4 ,
 .Xr netintro 4 ,
diff --git a/share/man/man4/man4.i386/fe.4 b/share/man/man4/man4.i386/fe.4
index ff7661e..0bcc72d 100644
--- a/share/man/man4/man4.i386/fe.4
+++ b/share/man/man4/man4.i386/fe.4
@@ -265,7 +265,6 @@ and it will not affect long term kernel memory usage.
 Although XNS and IPX supports are included in the driver,
 they are never be tested and must have a lot of bugs. 
 .Sh AUTHORS, COPYRIGHT AND DISCLAIMER
-.Pp
 The
 .Nm
 driver was originally written and contributed by
diff --git a/share/man/man4/man4.i386/gsc.4 b/share/man/man4/man4.i386/gsc.4
index b28ff88..a4360fe 100644
--- a/share/man/man4/man4.i386/gsc.4
+++ b/share/man/man4/man4.i386/gsc.4
@@ -60,7 +60,6 @@ vs. portable
 .Em pnm
 output
 .El
-.Pp
 .Sh DESCRIPTION
 The
 .Nm
diff --git a/share/man/man4/man4.i386/ie.4 b/share/man/man4/man4.i386/ie.4
index 35a2446..01f35a7 100644
--- a/share/man/man4/man4.i386/ie.4
+++ b/share/man/man4/man4.i386/ie.4
@@ -20,7 +20,6 @@ the Intel i82586 chip.
 It supports the AT&T Starlan 10 and Starlan Fiber, 
 the EN100, the Intel EtherExpress 16, the 3COM 3C507 and the RACAL Interlan 
 NI5210.
-.Pp
 .Sh DIAGNOSTICS
 .Bl -diag
 .It "ie%d: unknown board type code %d"
@@ -71,7 +70,6 @@ shared memory.
 It is strongly advisable to use the 16 kbyte variant. 
 You can upgrade your 8 kbyte card to 16 kbyte by adding an additional
 RAM chip. 
-.Pp
 .Sh SEE ALSO
 .Xr arp 4 ,
 .Xr netintro 4 ,
diff --git a/share/man/man4/man4.i386/le.4 b/share/man/man4/man4.i386/le.4
index 4eeee24..b2e0afe 100644
--- a/share/man/man4/man4.i386/le.4
+++ b/share/man/man4/man4.i386/le.4
@@ -43,7 +43,6 @@ and DE205) NICs.
 The valid IRQ settings for the
 .Nm
 driver are 5, 10, 11, and 15.
-.Pp
 .Sh DIAGNOSTICS
 .Bl -diag
 .It "le%d: not configured -- too many devices"
@@ -72,7 +71,6 @@ An overly high number of Ethernet collisions were detected.  It may be the
 case that the network is overly busy.  Or this may suggest a problem with
 the EtherWORKS card.
 .El
-.Pp
 .Sh SEE ALSO
 .Xr arp 4 ,
 .Xr netintro 4 ,
diff --git a/share/man/man4/man4.i386/longrun.4 b/share/man/man4/man4.i386/longrun.4
index ee418ee..2b331e8 100644
--- a/share/man/man4/man4.i386/longrun.4
+++ b/share/man/man4/man4.i386/longrun.4
@@ -49,7 +49,6 @@ MIBs control the different CPU modes:
 .It "hw.crusoe.voltage    integer no         Current voltage (mV).
 .It "hw.crusoe.percentage integer no         Processing performance (%).
 .El
-.Pp
 .Sh EXAMPLES
 Print the current status:
 .Bd -literal -offset indent
@@ -61,7 +60,6 @@ To set LongRun mode to performance oriented variable frequency mode
 .Bd -literal -offset indent
 # sysctl -w hw.crusoe.longrun=2
 .Ed
-.Pp
 .Sh AUTHORS
 .An -nosplit
 LongRun support and this manual page were written by
diff --git a/share/man/man4/man4.i386/matcd.4 b/share/man/man4/man4.i386/matcd.4
index e13b021..797b906 100644
--- a/share/man/man4/man4.i386/matcd.4
+++ b/share/man/man4/man4.i386/matcd.4
@@ -254,7 +254,6 @@ host interface implementation.  If you have a board that won't communicate
 with the drives under MS-DOS using the genuine Creative Labs drivers, then
 .Nm
 may not work with that host adapter.
-.Pp
 .Sh SUPPORTED OPERATIONS
 The
 .Nm
@@ -361,7 +360,6 @@ The file \fIoptions.h\fR contains all of the compilation options.
 By default, the driver is configured to run on the current version of
 .Fx .
 .Sh NOTES
-.Pp
 The Creative/Panasonic interface does not use interrupts or DMA
 although the drives themselves are capable of using both.
 .Pp
diff --git a/share/man/man4/man4.i386/pcf.4 b/share/man/man4/man4.i386/pcf.4
index d73473d..3fffcfe 100644
--- a/share/man/man4/man4.i386/pcf.4
+++ b/share/man/man4/man4.i386/pcf.4
@@ -53,7 +53,6 @@ It
 controls all the I2C-bus specific sequences, protocol, arbitration and timing.
 The PCF8584 allows parallel-bus systems to communicate bidirectionally with
 the I2C-bus.
-.Pp
 .Sh SEE ALSO
 .Xr iicbus 4
 .Sh HISTORY
diff --git a/share/man/man4/man4.i386/pnp.4 b/share/man/man4/man4.i386/pnp.4
index fb4976f..7050efa 100644
--- a/share/man/man4/man4.i386/pnp.4
+++ b/share/man/man4/man4.i386/pnp.4
@@ -111,7 +111,6 @@ Modifications to
 the table will be saved to the boot image on the filesystem by the
 .Xr kget 8
 command.
-.Pp
 .Sh DEVICE DRIVER SUPPORT FOR PnP
 PnP devices are automatically recognized and configured by the kernel.
 A PnP device is identified by the following data structure:
@@ -174,7 +173,6 @@ be used in the attach routine
 .Em only ,
 before accessing the card's ISA ports/memory address ranges.
 .El
-.Pp
 .Sh SEE ALSO
 .Xr kget 8
 .Sh BUGS
diff --git a/share/man/man4/man4.i386/rdp.4 b/share/man/man4/man4.i386/rdp.4
index 1de2f6a..d48aa85 100644
--- a/share/man/man4/man4.i386/rdp.4
+++ b/share/man/man4/man4.i386/rdp.4
@@ -95,7 +95,6 @@ driver as well as a
 driver into the same kernel.  If no RTL 8002 hardware is present, probing
 will eventually detect the printer driver.
 .Sh DIAGNOSTICS
-.Pp
 .Dl "rdp0: configured IRQ (7) cannot be asserted by device"
 .Pp
 The probe routine was unable to get the RTL 8002 asserting an interrupt
@@ -119,7 +118,6 @@ should be tried.
 After initiating a packet transmission, the ethernet adapter didn't
 return a notification of the (successful or failed) transmission.  The
 hardware is likely to be wedged, and is being reset.
-.Pp
 .Sh SEE ALSO
 .Xr ng_ether 4 ,
 .Xr ppc 4 ,
diff --git a/share/man/man4/man4.i386/sr.4 b/share/man/man4/man4.i386/sr.4
index bd73598..289811e 100644
--- a/share/man/man4/man4.i386/sr.4
+++ b/share/man/man4/man4.i386/sr.4
@@ -87,7 +87,6 @@ Use separate external clocks for transmit and receive on port 0.
 .It Em 0x40
 Use separate external clocks for transmit and receive on port 1.
 .El
-.Pp
 .Sh NUMBERING
 Only one line for each card is needed in the kernel configuration file.
 The first card's ports will be installed from sr0. The numbering of the
@@ -98,7 +97,6 @@ start at sr2.
 The card only supports IRQ 3, 4, 5, 7, 10, 11, 12 and 15.
 .Pp
 The iomem area is a 16Kb block and must start at a 16Kb boundary.
-.Pp
 .Sh NETGRAPH SUPPORT
 If the kernel is compiled with
 .Dv "options NETGRAPH"
diff --git a/share/man/man4/man4.i386/tx.4 b/share/man/man4/man4.i386/tx.4
index 4ebfec5..7c15c94 100644
--- a/share/man/man4/man4.i386/tx.4
+++ b/share/man/man4/man4.i386/tx.4
@@ -84,7 +84,6 @@ Packet thrown away.
 While reseting, driver failed to stop device correctly. 
 .El
 .Sh BUGS
-.Pp
 The multicast packets filtering is not supported.
 .Sh SEE ALSO
 .Xr arp 4 ,
diff --git a/share/man/man4/man4.i386/wt.4 b/share/man/man4/man4.i386/wt.4
index e204da5..8e726a2 100644
--- a/share/man/man4/man4.i386/wt.4
+++ b/share/man/man4/man4.i386/wt.4
@@ -42,6 +42,5 @@ QIC-02
 .It
 QIC-36 
 .El
-.Pp
 .Sh SEE ALSO
 .Xr intro 4