diff options
Diffstat (limited to 'share/man/man4/ida.4')
-rw-r--r-- | share/man/man4/ida.4 | 84 |
1 files changed, 84 insertions, 0 deletions
diff --git a/share/man/man4/ida.4 b/share/man/man4/ida.4 new file mode 100644 index 0000000..01e0267 --- /dev/null +++ b/share/man/man4/ida.4 @@ -0,0 +1,84 @@ +.\" $FreeBSD$ +.\" Written by Tom Rhodes +.\" This file is public domain +.\" +.Dd August 8, 2004 +.Dt IDA 4 +.Os +.Sh NAME +.Nm ida +.Nd Compaq Intelligent Drive Array Controllers +.Sh SYNOPSIS +To compile this driver into the kernel, +place the following lines in your +kernel configuration file: +.Bd -ragged -offset indent +.Cd "device scbus" +.Cd "device ida" +.Ed +.Pp +Alternatively, to load the driver as a +module at boot time, place the following line in +.Xr loader.conf 5 : +.Bd -literal -offset indent +ida_load="YES" +.Ed +.Sh DESCRIPTION +The Compaq Intelligent Drive Array (IDA) technology is used to +distribute data across an array of hard drives. +It unites these hard drives into one or more high-performance logical drives. +The drive array is managed by an array controller. +.Pp +These controllers have the ability to provide fault tolerance for the connected +drives and optionally provide write cache for the logical drives. +It is also possible for an application to access the SCSI bus subsystem +directly by using the pass-through interface. +.Sh HARDWARE +The following controllers are supported by the +.Nm +driver: +.Pp +.Bl -bullet -compact +.It +Compaq SMART Array 221 +.It +Compaq Integrated SMART Array Controller +.It +Compaq SMART Array 4200 +.It +Compaq SMART Array 4250ES +.It +Compaq SMART 3200 Controller +.It +Compaq SMART 3100ES Controller +.It +Compaq SMART-2/DH Controller +.It +Compaq SMART-2/SL Controller +.It +Compaq SMART-2/P Controller +.It +Compaq SMART-2/E Controller +.It +Compaq SMART Controller +.El +.Sh IMPLEMENTATION NOTES +Extreme caution should be exercised when using the pass-through interface. +It is possible to interfere with normal system I/O and cause hangs if +pass-through is used to an active device. +Pass-through should only be used to a device that is otherwise quiescent. +.Sh SEE ALSO +.Xr cam 4 , +.Xr pass 4 , +.Xr xpt 4 , +.Xr camcontrol 8 +.Sh AUTHORS +.An -nosplit +The +.Nm +driver was written by +.An Jonathan Lemon Aq jlemon@FreeBSD.org +and +.An Matthew N. Dodd Aq mdodd@FreeBSD.org . +This manual page was written by +.An Tom Rhodes Aq trhodes@FreeBSD.org . |