diff options
Diffstat (limited to 'share/FAQ/FreeBSD-1.X/Systems-1.1.FAQ')
| -rw-r--r-- | share/FAQ/FreeBSD-1.X/Systems-1.1.FAQ | 266 |
1 files changed, 0 insertions, 266 deletions
diff --git a/share/FAQ/FreeBSD-1.X/Systems-1.1.FAQ b/share/FAQ/FreeBSD-1.X/Systems-1.1.FAQ deleted file mode 100644 index 29b2c06..0000000 --- a/share/FAQ/FreeBSD-1.X/Systems-1.1.FAQ +++ /dev/null @@ -1,266 +0,0 @@ - Systems FAQ - For FreeBSD - Last Modified: $Id: Systems-1.1.FAQ,v 1.1 1994/09/16 18:24:40 gclarkii Exp $ - -This FAQ is a list of systems that people have sent to the FAQ maintnance -person for inclusion. If you have a system you would like to be included -please send it to FreeBSD-FAQ@freefall.cdrom.com. - -Disclaimer: This document is composed of systems that people have sent to -the FAQ maintnance person. It is the not to be taken as an endorsement -for any system or manufacture. - - -1. - -386DX/20 real AMI, ISA -Oak SVGA (no X) -8MB -Adaptec 1542B, WD1007V ESDI -Wren VI and Miniscribe 660MB 20Mbit/sec ESDI -WD 8013EBT - -2. - -486DX/25 clone, AMI BIOS, ISA -Orchid PCIII gas plasma (yes, VGA16) -8MB -Adaptec 1542B -Micropolis 1684 SCSI -SMC 8013EEWC - -3. - - ??? OPTI chipset AMI BIOS 486/50 ISA -ISA ET4000 w/ X11 (not so slow) -16 Mb - 48 Mb swap -ISA aha1542 B -ISA no-name IDE w/ floppies -FUJITSU M2623S-512 405MB set to SCSI2 -SEAGATE ST3283N 237MB SCSI2 -SANYO CRD-400I SCSI2 cdromcdrom - -4. - -Lipizzan LDO-1 486DX-33 motherboard -Orchid ProIIs (1M) video -8 MB memory -Generic 2S/1P/2FD/IDE controller: -Maxtor 7213 AT -WDC AC2420H -PAS-16 + Sony CDU31A CD drive (Fusion 16 package). - *** The CD drive does not currently work with FreeBSD. - -5. - -Asus VL/ISA-486SV2 (ISA-VLB as you can see) -Orchid Fahrenheit 1280+ VLB (yes) -20MB -Some no-name IDE VLB controller -Conner CP30504 (I think....the 540MB IDE one) -Zoltrix 14.4/14.4 Fax/Modem on tty01 -Intel 486DX2/66 CPU + fan -Conner CP30104 (120MB....for DOS) - -6. - -AIR 486El (running with AMD486/40) -ATI Graphics Ultra Pro running XFree862.1 -16M -Adaptec 1742 -Micropolis 2217 -Wangtec 6130FS DAT drive (Some problems) - -7. - -Compudyne 486 DX2/66 -ATI Local Bus GUP w/ 2megs -16 Megs Memory -504 IDE Hard Drive -Colorado 250 meg QIC-80 tape drive - -8. - -American Megatrends Enterprise III, 486DX2-66 -ATI VLB Mach 32 (with X) -16 meg -Adaptec 1742 EISA SCSI with floppy -Toshiba 5030 SCSI-II -Toshiba 5157 SCSI-II -SMC Elite16T ISA Ethernet (ISA) - -9. - -American Megatrends Enterprise III, 486DX -ATI VLB Mach 32 (with X) -32 meg -Adaptec 1742 EISA SCSI with floppy -Maxtor P0-12S SCSI -Digital DSP5200S SCSI-II -Pro Audio Spectrum 16 -Wonder Board, 4 serial (16550), 3 parallel, each on a different interrupt - -10. - -NoName 486DX/33, Intel Chipset, EISA-Bus -ATI Graphics Ultra Pro EISA, -17" Nanao (Eizo) F550-i Monitor -Running the Mach32 X-Server XFree86-2.1.1 with fonts created from source. -16 MB RAM (planning to add another 8 MB). -AHA1742A -Conner CP3100 -Fujitsu 520 MB -Archive 525MB streamer tape. -Gravis UltraSound - works for mod-files. - -11. - -ASUS SP3 PCI Board with i486 DX/2 66 MHz -ISA ET4000 (I already tested a S3 805 PCI card successfully) -Adaptec 1542B -Toshiba XM3301TA CD-Rom -CDC Harddisk, 572 MB (I don't know the exact specs) - -12. - -Mylex MAE486/33 EISA Motherboard -16MB memory -Actix GE32+ S3 801 gfx -Adaptec 1742A controller -Seagate ST3160 drive -Seagate ST5120 drive -Archive Viper 150MB tape -Roland SCC-1 sound card -Gravis Ultrasound card -Longshine SMC/Novell compatable ethernet card - -13. - -Model: DECpc LPv 466d2 -Config: Local (Motherboard) S3 801 gfx, IDE controller, PS/2 mouse, 12MB memory - -14. - - -??? 486/DX266 EISA/VLB Motherboard -16MB memory -#9 GXE L12 VLB 3MB graphics card -Bt445S VLB disk controller -DEC DSP3105S drive -MAXSTOR P-17S drive -Tandberg 525MB tape drive -Toshiba XM3301 CDROM -Soundblaster 2.0 -Longshine SMC/Novell compatable ethernet card - -15. - -M407 PC chips with 33Mhz 486. -Had to disable external cache due to DMA problems. Board uses write-through -cache unless a second chip is added to allow write-back.write-back. -Orchid ProDesigner II (yes) -16Mb -IDE -Maxtor 7213 AT and Maxtor 7120 AT -2 BICC Isolans (Lance based cards) - -16. - -Gigabyte EISA/VLB motherboard with SIS chipset, AMI bios, 32 MB ram -Adaptec 1742 SCSI 2 controller with floppy controller enabled -Spea/V7 Mirage - S3/805 based localbus graphics card with 1 MB d-ram -no name wd8013 compatible ethernet card -Gravis Ultrasound card with 1 MB ram -2 Fujitsu 400 MB and 1 Seagate 500 MB SCSI 2 harddisks -5 1/4 + 3 1/2 inch floppy drives -Tandberg TDC3600 60 MB + Tandberg TDC3800 525 MB Streamer (these don't work -quite properly yet) - -17. - -i486DX33, 16 Mb RAM, 256 Kb external cache, VLB board -no-name IDE/floppy controller -Western Digital Caviar 2340 (325 Mb) -Kalok KL-343 (40 Mb) -Chips & Technologies 451 SuperVGA card (800x600, 16 colours, 256Kb) - -18. - -no name EISA i486DX/33 board, 16 MB RAM -Adaptec AHA-1540*A* (not knowing if the current -current might cause - problems, my kernel is from end of march) -Maxtor MXT-1240S, 1.2Gig very fast SCSI disk -Seagate ST-1144A, just to boot off the beast (also has a messdos partition yet) -Archive Viper 150 tape; has a firmware braindeadness when appending files, - works very well otherwise -ELSA Winner 1000 ISA/EISA, 1MB VRAM, S3 86C928 (unfortunately, D-step chip) -Nokia 447-B 17in monitor, running ~ 1100x800 resolution, very nice -true `Mouse Systems' optical mouse, fine thing! -sometimes a Toshiba XM-3301 CDROM, rather old, but solid & reliable - -19. - -older south-east Asia made notebook, i386SX/16, 5 MB RAM (where the 384 k hole - can be re-mapped, so all the 5 MB are useable) -Seagate ST-9145AG, 120 MB 2.5in IDE disk, very low power consumption, but - rather slow transfer rate, only about 350 K/s, so paging is a mess -640x480 LCD, ~ 16 gray tones distinguishable, Cirrus Logic CL-GD610/620 - chipset; runs generic VGA-Mono and VGA-16 XFree86[tm] servers; needs - some hacks in rc.local to give full contrast when running with the - pcvt display driver (due to their different default attribute handling) - - -20. - -Data General Dasher 386sx/16, 8 MB RAM -Adaptec AHA-1542B -Seagate ST-3655N, 525 MB SCSI disk -Conner CP-3044, 40 MB IDE disk -has been working with a Western Digital WD-1007V ESDI controller (on - secondary wdc address), and a Micropolis 1664-7 330 MB ESDI disk - - but this beast was terribly slow, loud (& unreliable) and therefore - had to go -ET-3000 based 512 K VGA, slow (wrt. XFree86), but reliable -3Com 3C503 Ethernet adaptor, suffers from the `do not nfs mount with - too large packets' problem, but works well otherwise -`Mouse Systems' optical mouse -Toshiba XM-3301 CDROM -already ran with a Micropolis 1664-3 330 MB SCSI disk (same drive as - above, but different interface) -already ran with an IBM 2Gig SCSI disk (don't remember the type) - - -21. - -Mylex MNA 486/33 EISA Motherboard -16Mb of Memory -1.2 GB Toshiba 538 SCSI disk -400Mb IBM SCSI disk -150/250Mb Tandberg SCSI tape drive -Toshiba 3401 SCSI CD-ROM -Tseng 4000 Video Controller -Logitech Bus Mouse -Mediavision Pro Audio Stereo Sound Card -Adaptech 1742A SCSI controller -WD8013EBT Ethernet Card - -22. - -386DX-40 w/Cyrix math co-processor -ET-4000 running X -16MB -IDE -540MB Western Digital -WD8003EP - - - - - - - - - - - - |
