diff options
Diffstat (limited to 'sbin')
43 files changed, 345 insertions, 345 deletions
diff --git a/sbin/adjkerntz/adjkerntz.8 b/sbin/adjkerntz/adjkerntz.8 index 84e8491..fc2a064 100644 --- a/sbin/adjkerntz/adjkerntz.8 +++ b/sbin/adjkerntz/adjkerntz.8 @@ -171,6 +171,13 @@ Empty file. Its presence indicates that the machine's CMOS clock is set to local time, while its absence indicates a UTC CMOS clock. .El +.Sh DIAGNOSTICS +No diagnostics. +If an error occurs, +.Nm +logs an error message via +.Xr syslog 3 +and exits with a nonzero return code. .Sh SEE ALSO .Xr tzset 3 , .Xr crontab 5 , @@ -179,17 +186,10 @@ time, while its absence indicates a UTC CMOS clock. .Xr sysctl 8 , .Xr tzsetup 8 , .Xr zic 8 -.Sh DIAGNOSTICS -No diagnostics. -If an error occurs, -.Nm -logs an error message via -.Xr syslog 3 -and exits with a nonzero return code. -.Sh AUTHORS -.An Andrey A. Chernov Aq ache@astral.msk.su .Sh HISTORY The .Nm utility appeared in .Fx 1.0 . +.Sh AUTHORS +.An Andrey A. Chernov Aq ache@astral.msk.su diff --git a/sbin/atm/fore_dnld/fore_dnld.8 b/sbin/atm/fore_dnld/fore_dnld.8 index 7ffd0d2..f98bed9 100644 --- a/sbin/atm/fore_dnld/fore_dnld.8 +++ b/sbin/atm/fore_dnld/fore_dnld.8 @@ -98,8 +98,6 @@ adapters. .It Pa ~harp/doc/Install HARP installation instructions. .El -.Sh BUGS -None known. .Sh COPYRIGHT Copyright (c) 1994-1998, Network Computing Services, Inc. .Sh AUTHORS @@ -113,3 +111,5 @@ Minnesota Supercomputer Center, Inc. This software was developed under the sponsorship of the Defense Advanced Research Projects Agency (DARPA) under contract numbers F19628-92-C-0072 and F19628-95-C-0215. +.Sh BUGS +None known. diff --git a/sbin/atm/ilmid/ilmid.8 b/sbin/atm/ilmid/ilmid.8 index a3b5265..59629c1 100644 --- a/sbin/atm/ilmid/ilmid.8 +++ b/sbin/atm/ilmid/ilmid.8 @@ -94,9 +94,6 @@ The ATM Forum, .%T "ATM User-Network Interface, Version 3.1 (UNI 3.1) Specification" for details on the ILMI protocols and address registration procedures. -.Sh BUGS -Please report any bugs to -.Aq harp\-bugs@magic.net . .Sh COPYRIGHT Copyright (c) 1994-1998, Network Computing Services, Inc. .Sh AUTHORS @@ -109,3 +106,6 @@ Network Computing Services, Inc. .Sh ACKNOWLEDGMENTS This software was developed with the support of the Defense Advanced Research Projects Agency (DARPA). +.Sh BUGS +Please report any bugs to +.Aq harp\-bugs@magic.net . diff --git a/sbin/badsect/badsect.8 b/sbin/badsect/badsect.8 index be24feb..10812b6 100644 --- a/sbin/badsect/badsect.8 +++ b/sbin/badsect/badsect.8 @@ -112,22 +112,22 @@ it will ask A positive response will cause .Xr fsck 8 to convert the inode to a regular file containing the bad block. -.Sh SEE ALSO -.Xr fsck 8 .Sh DIAGNOSTICS The .Nm utility refuses to attach a block that resides in a critical area or is out of range of the file system. A warning is issued if the block is already in use. +.Sh SEE ALSO +.Xr fsck 8 +.Sh HISTORY +The +.Nm +utility appeared in +.Bx 4.1 . .Sh BUGS If more than one sector which comprise a file system fragment are bad, you should specify only one of them to .Nm , as the blocks in the bad sector files actually cover all the sectors in a file system fragment. -.Sh HISTORY -The -.Nm -utility appeared in -.Bx 4.1 . diff --git a/sbin/ccdconfig/ccdconfig.8 b/sbin/ccdconfig/ccdconfig.8 index 63de938..6b4a331 100644 --- a/sbin/ccdconfig/ccdconfig.8 +++ b/sbin/ccdconfig/ccdconfig.8 @@ -129,6 +129,11 @@ The component devices need to name partitions of type .Dq 4.2BSD as shown by .Xr disklabel 8 ) . +.Sh FILES +.Bl -tag -width /etc/ccd.conf -compact +.It Pa /etc/ccd.conf +default ccd configuration file +.El .Sh EXAMPLES A number of .Nm @@ -209,11 +214,6 @@ or software RAID systems such as .Xr geom 8 and .Xr vinum 8 . -.Sh FILES -.Bl -tag -width /etc/ccd.conf -compact -.It Pa /etc/ccd.conf -default ccd configuration file -.El .Sh SEE ALSO .Xr dd 1 , .Xr ccd 4 , @@ -222,6 +222,11 @@ default ccd configuration file .Xr fdisk 8 , .Xr rc 8 , .Xr vinum 8 +.Sh HISTORY +The +.Nm +utility first appeared in +.Nx 1.0a . .Sh BUGS The initial disklabel returned by .Xr ccd 4 @@ -231,8 +236,3 @@ One needs to change the number of paritions to 8 using to get the usual .Bx expectations. -.Sh HISTORY -The -.Nm -utility first appeared in -.Nx 1.0a . diff --git a/sbin/comcontrol/comcontrol.8 b/sbin/comcontrol/comcontrol.8 index 6ca6420..87a7630 100644 --- a/sbin/comcontrol/comcontrol.8 +++ b/sbin/comcontrol/comcontrol.8 @@ -45,9 +45,6 @@ The standard way to use is to put invocations of it in the .Pa /etc/rc.d/serial startup script. -.Sh SEE ALSO -.Xr stty 1 , -.Xr sio 4 .Sh FILES .Bl -tag -width /dev/ttyd? -compact .It Pa /dev/ttyd? @@ -55,11 +52,14 @@ dialin devices, hardwired terminals .It Pa /dev/cuad? dialout devices .El -.Sh AUTHORS -.An Christopher G. Demetriou +.Sh SEE ALSO +.Xr stty 1 , +.Xr sio 4 .Sh HISTORY Originally part of cgd's com package patches, version 0.2.1, to .Bx 386 0.1 . Once controlled bidirectional capabilities. Little is left to control now that these capabilities are standard. +.Sh AUTHORS +.An Christopher G. Demetriou diff --git a/sbin/dump/dump.8 b/sbin/dump/dump.8 index b7be5ef..adf1708 100644 --- a/sbin/dump/dump.8 +++ b/sbin/dump/dump.8 @@ -464,17 +464,22 @@ dump table: file systems and frequency to find group .Em operator .El +.Sh EXIT STATUS +Dump exits with zero status on success. +Startup errors are indicated with an exit code of 1; +abnormal termination is indicated with an exit code of 3. +.Sh DIAGNOSTICS +Many, and verbose. .Sh SEE ALSO .Xr chflags 1 , .Xr fstab 5 , .Xr restore 8 , .Xr rmt 8 -.Sh DIAGNOSTICS -Many, and verbose. -.Sh EXIT STATUS -Dump exits with zero status on success. -Startup errors are indicated with an exit code of 1; -abnormal termination is indicated with an exit code of 3. +.Sh HISTORY +A +.Nm +utility appeared in +.At v6 . .Sh BUGS Fewer than 32 read errors on the file system are ignored, though all errors will generate a warning message. @@ -526,8 +531,3 @@ This will be fixed in a later version of .Fx . Presently, it works if you set it setuid (like it used to be), but this might constitute a security risk. -.Sh HISTORY -A -.Nm -utility appeared in -.At v6 . diff --git a/sbin/dumpon/dumpon.8 b/sbin/dumpon/dumpon.8 index ff364e1..096cbde 100644 --- a/sbin/dumpon/dumpon.8 +++ b/sbin/dumpon/dumpon.8 @@ -116,6 +116,13 @@ variable of .Xr loader 8 must be used to enable dumps for system panics which occur during kernel initialization. +.Sh FILES +.Bl -tag -width "/dev/{ad,da}?s?b" -compact +.It Pa /dev/{ad,da}?s?b +standard swap areas +.It Pa /etc/rc.conf +boot-time system configuration +.El .Sh SEE ALSO .Xr fstab 5 , .Xr rc.conf 5 , @@ -126,18 +133,11 @@ during kernel initialization. .Xr savecore 8 , .Xr swapon 8 , .Xr panic 9 -.Sh FILES -.Bl -tag -width "/dev/{ad,da}?s?b" -compact -.It Pa /dev/{ad,da}?s?b -standard swap areas -.It Pa /etc/rc.conf -boot-time system configuration -.El -.Sh BUGS -Because the file system layer is already dead by the time a crash dump -is taken, it is not possible to send crash dumps directly to a file. .Sh HISTORY The .Nm utility appeared in .Fx 2.1 . +.Sh BUGS +Because the file system layer is already dead by the time a crash dump +is taken, it is not possible to send crash dumps directly to a file. diff --git a/sbin/ffsinfo/ffsinfo.8 b/sbin/ffsinfo/ffsinfo.8 index 4508c5f..99636ea0 100644 --- a/sbin/ffsinfo/ffsinfo.8 +++ b/sbin/ffsinfo/ffsinfo.8 @@ -119,12 +119,6 @@ is provided, output will be sent to stdout. will dump .Pa /dev/vinum/testvol with all available information. -.Sh BUGS -Snapshots are handled like plain files. -They should get their own level to provide for independent control of the -amount of what gets dumped. -It probably also makes sense to some extend to dump the snapshot as a -file system. .Sh SEE ALSO .Xr disklabel 8 , .Xr dumpfs 8 , @@ -133,12 +127,18 @@ file system. .Xr newfs 8 , .Xr tunefs 8 , .Xr vinum 8 -.Sh AUTHORS -.An Christoph Herrmann Aq chm@FreeBSD.org -.An Thomas-Henning von Kamptz Aq tomsoft@FreeBSD.org -.An The GROWFS team Aq growfs@Tomsoft.COM .Sh HISTORY The .Nm utility first appeared in .Fx 4.4 . +.Sh AUTHORS +.An Christoph Herrmann Aq chm@FreeBSD.org +.An Thomas-Henning von Kamptz Aq tomsoft@FreeBSD.org +.An The GROWFS team Aq growfs@Tomsoft.COM +.Sh BUGS +Snapshots are handled like plain files. +They should get their own level to provide for independent control of the +amount of what gets dumped. +It probably also makes sense to some extend to dump the snapshot as a +file system. diff --git a/sbin/fsck_msdosfs/fsck_msdosfs.8 b/sbin/fsck_msdosfs/fsck_msdosfs.8 index 4899064..4880c5b 100644 --- a/sbin/fsck_msdosfs/fsck_msdosfs.8 +++ b/sbin/fsck_msdosfs/fsck_msdosfs.8 @@ -114,13 +114,13 @@ as the answer to all operator questions. .Xr fsck 8 , .Xr fsck_ffs 8 , .Xr mount_msdosfs 8 -.Sh BUGS -The -.Nm -utility is -.Ud . .Sh HISTORY The .Nm utility first appeared in .Fx 4.4 . +.Sh BUGS +The +.Nm +utility is +.Ud . diff --git a/sbin/fsdb/fsdb.8 b/sbin/fsdb/fsdb.8 index 194ba83..a8f52f7 100644 --- a/sbin/fsdb/fsdb.8 +++ b/sbin/fsdb/fsdb.8 @@ -225,15 +225,6 @@ Exit the program. .Xr fs 5 , .Xr clri 8 , .Xr fsck 8 -.Sh BUGS -Manipulation of ``short'' symlinks doesn't work (in particular, don't -try changing a symlink's type). -.Pp -You must specify modes as numbers rather than symbolic names. -.Pp -There are a bunch of other things that you might want to do which -.Nm -doesn't implement. .Sh HISTORY The .Nm @@ -250,6 +241,15 @@ written by .An Peter Wemm ported it to .Fx . +.Sh BUGS +Manipulation of ``short'' symlinks doesn't work (in particular, don't +try changing a symlink's type). +.Pp +You must specify modes as numbers rather than symbolic names. +.Pp +There are a bunch of other things that you might want to do which +.Nm +doesn't implement. .Sh WARNING Use this tool with extreme caution--you can damage an FFS file system beyond what diff --git a/sbin/geom/class/concat/gconcat.8 b/sbin/geom/class/concat/gconcat.8 index 4e729a2..f13a789 100644 --- a/sbin/geom/class/concat/gconcat.8 +++ b/sbin/geom/class/concat/gconcat.8 @@ -153,6 +153,8 @@ This can be set to a number between 0 and 3 inclusive. If set to 0 minimal debug information is printed, and if set to 3 the maximum amount of debug information is printed. .El +.Sh EXIT STATUS +Exit status is 0 on success, and 1 if the command fails. .Sh EXAMPLES The following example shows how to configure four disks for automatic concatenation, create a file system on it, and mount it: @@ -165,8 +167,6 @@ umount /mnt gconcat stop data gconcat unload .Ed -.Sh EXIT STATUS -Exit status is 0 on success, and 1 if the command fails. .Sh SEE ALSO .Xr geom 4 , .Xr loader.conf 5 , diff --git a/sbin/geom/class/label/glabel.8 b/sbin/geom/class/label/glabel.8 index 0fb4d95..5af9572 100644 --- a/sbin/geom/class/label/glabel.8 +++ b/sbin/geom/class/label/glabel.8 @@ -178,6 +178,8 @@ This can be set to a number between 0 and 2 inclusive. If set to 0 minimal debug information is printed, and if set to 2 the maximum amount of debug information is printed. .El +.Sh EXIT STATUS +Exit status is 0 on success, and 1 if the command fails. .Sh EXAMPLES The following example shows how to set up a label for disk .Dq Li da2 , @@ -197,8 +199,6 @@ The next example shows how to set up a label for a UFS file system: tunefs -L data /dev/da4s1a mount /dev/ufs/data /mnt/data .Ed -.Sh EXIT STATUS -Exit status is 0 on success, and 1 if the command fails. .Sh SEE ALSO .Xr geom 4 , .Xr loader.conf 5 , diff --git a/sbin/geom/class/mirror/gmirror.8 b/sbin/geom/class/mirror/gmirror.8 index 350df8e..a90634c 100644 --- a/sbin/geom/class/mirror/gmirror.8 +++ b/sbin/geom/class/mirror/gmirror.8 @@ -220,6 +220,8 @@ Additional options include: .It Fl v Be more verbose. .El +.Sh EXIT STATUS +Exit status is 0 on success, and 1 if the command fails. .Sh EXAMPLES Use 3 disks to setup a mirror. Choose split balance algorithm, split only @@ -268,8 +270,6 @@ gmirror deactivate data da1 dd if=/dev/da1 of=/backup/data.img bs=1m gmirror activate data da1 .Ed -.Sh EXIT STATUS -Exit status is 0 on success, and 1 if the command fails. .Sh SEE ALSO .Xr geom 4 , .Xr geom 8 , diff --git a/sbin/geom/class/nop/gnop.8 b/sbin/geom/class/nop/gnop.8 index dfa209c..90f72bf 100644 --- a/sbin/geom/class/nop/gnop.8 +++ b/sbin/geom/class/nop/gnop.8 @@ -128,6 +128,8 @@ This can be set to a number between 0 and 2 inclusive. If set to 0 minimal debug information is printed, and if set to 2 the maximum amount of debug information is printed. .El +.Sh EXIT STATUS +Exit status is 0 on success, and 1 if the command fails. .Sh EXAMPLES The following example shows how to create a transparent provider for disk .Pa /dev/da0 @@ -136,8 +138,6 @@ with 50% failure probability, and how to destroy it. gnop create -v -f 50 da0 gnop destroy -v da0.nop .Ed -.Sh EXIT STATUS -Exit status is 0 on success, and 1 if the command fails. .Sh SEE ALSO .Xr geom 4 , .Xr geom 8 diff --git a/sbin/geom/class/raid3/graid3.8 b/sbin/geom/class/raid3/graid3.8 index 16669fe..69da6e7 100644 --- a/sbin/geom/class/raid3/graid3.8 +++ b/sbin/geom/class/raid3/graid3.8 @@ -191,6 +191,8 @@ Additional options include: .It Fl v Be more verbose. .El +.Sh EXIT STATUS +Exit status is 0 on success, and 1 if the command fails. .Sh EXAMPLES Use 3 disks to setup a RAID3 array (with the round-robin reading feature). Create a file system, mount it, then unmount it and stop device: @@ -217,8 +219,6 @@ Replace one data disk with a brand new one: graid3 remove -n 0 data graid3 insert -n 0 data da5 .Ed -.Sh EXIT STATUS -Exit status is 0 on success, and 1 if the command fails. .Sh SEE ALSO .Xr geom 4 , .Xr geom 8 , diff --git a/sbin/geom/class/shsec/gshsec.8 b/sbin/geom/class/shsec/gshsec.8 index 14e8a46..2751cdc 100644 --- a/sbin/geom/class/shsec/gshsec.8 +++ b/sbin/geom/class/shsec/gshsec.8 @@ -101,6 +101,8 @@ Hardcode providers' names in metadata. .It Fl v Be more verbose. .El +.Sh EXIT STATUS +Exit status is 0 on success, and 1 if the command fails. .Sh EXAMPLES The following example shows how to created a shared secret device. Secret will be split between a slice on the local disk and a USB Pen drive. @@ -113,8 +115,6 @@ From now on, when USB Pen drive will be inserted, it will be automatically detected and connected making secret available via .Pa /dev/shsec/secret device. -.Sh EXIT STATUS -Exit status is 0 on success, and 1 if the command fails. .Sh SEE ALSO .Xr geom 4 , .Xr gbde 8 , diff --git a/sbin/geom/class/stripe/gstripe.8 b/sbin/geom/class/stripe/gstripe.8 index 9e6b720..b9f10e3 100644 --- a/sbin/geom/class/stripe/gstripe.8 +++ b/sbin/geom/class/stripe/gstripe.8 @@ -190,6 +190,8 @@ If this value is large, you should consider increasing the .Va kern.geom.stripe.maxmem value. .El +.Sh EXIT STATUS +Exit status is 0 on success, and 1 if the command fails. .Sh EXAMPLES The following example shows how to set up a striped device from four disks with a 4 KB stripe size for automatic configuration, @@ -204,8 +206,6 @@ umount /mnt gstripe stop data gstripe unload .Ed -.Sh EXIT STATUS -Exit status is 0 on success, and 1 if the command fails. .Sh COMPATIBILITY The .Nm diff --git a/sbin/geom/core/geom.8 b/sbin/geom/core/geom.8 index 2ac8d413..6e214fb 100644 --- a/sbin/geom/core/geom.8 +++ b/sbin/geom/core/geom.8 @@ -94,6 +94,8 @@ RAID3 .It STRIPE .El +.Sh EXIT STATUS +Exit status is 0 on success, and 1 if the command fails. .Sh EXAMPLES The following example shows how to set up a stripe on three disks for automatic configuration: @@ -112,8 +114,6 @@ Unload a kernel module which implements the MD class: .Bd -literal -offset indent geom md unload .Ed -.Sh EXIT STATUS -Exit status is 0 on success, and 1 if the command fails. .Sh SEE ALSO .Xr geom 4 , .Xr gconcat 8 , diff --git a/sbin/ggate/ggatec/ggatec.8 b/sbin/ggate/ggatec/ggatec.8 index 52c2cd5..dd7d7cc 100644 --- a/sbin/ggate/ggatec/ggatec.8 +++ b/sbin/ggate/ggatec/ggatec.8 @@ -150,6 +150,13 @@ Remote host to connect to. .It Ar path Path to a regular file or device. .El +.Sh EXIT STATUS +Exit status is 0 on success, or 1 if the command fails. +To get details about the failure, +.Nm +should be called with the +.Fl v +option. .Sh EXAMPLES Made use of CD-ROM device from remote host. .Bd -literal -offset indent @@ -161,13 +168,6 @@ client# ggatec create -o ro server /dev/acd0 ggate0 client# mount_cd9660 /dev/ggate0 /cdrom .Ed -.Sh EXIT STATUS -Exit status is 0 on success, or 1 if the command fails. -To get details about the failure, -.Nm -should be called with the -.Fl v -option. .Sh SEE ALSO .Xr geom 4 , .Xr ggated 8 , diff --git a/sbin/ggate/ggated/ggated.8 b/sbin/ggate/ggated/ggated.8 index c1fd976..3024a04 100644 --- a/sbin/ggate/ggated/ggated.8 +++ b/sbin/ggate/ggated/ggated.8 @@ -86,13 +86,6 @@ The format of an exports file is as follows: 1.2.3.0/24 RW /tmp/test.img hostname WO /tmp/image .Ed -.Sh EXAMPLES -Export CD-ROM device and a file: -.Bd -literal -offset indent -# echo "1.2.3.0/24 RO /dev/acd0" > /etc/gg.exports -# echo "client RW /image" >> /etc/gg.exports -# ggated -.Ed .Sh EXIT STATUS Exit status is 0 on success, or 1 if the command fails. To get details about the failure, @@ -100,6 +93,13 @@ To get details about the failure, should be called with the .Fl v option. +.Sh EXAMPLES +Export CD-ROM device and a file: +.Bd -literal -offset indent +# echo "1.2.3.0/24 RO /dev/acd0" > /etc/gg.exports +# echo "client RW /image" >> /etc/gg.exports +# ggated +.Ed .Sh SEE ALSO .Xr geom 4 , .Xr ggatec 8 , diff --git a/sbin/ggate/ggatel/ggatel.8 b/sbin/ggate/ggatel/ggatel.8 index b28abbb..01b964a 100644 --- a/sbin/ggate/ggatel/ggatel.8 +++ b/sbin/ggate/ggatel/ggatel.8 @@ -121,6 +121,13 @@ output. .It Ar path Path to a regular file or device. .El +.Sh EXIT STATUS +Exit status is 0 on success, or 1 if the command fails. +To get details about the failure, +.Nm +should be called with the +.Fl v +option. .Sh EXAMPLES .Dq GEOMify the @@ -139,13 +146,6 @@ umount /secret gbde detach ggate5 ggatel destroy -u 5 .Ed -.Sh EXIT STATUS -Exit status is 0 on success, or 1 if the command fails. -To get details about the failure, -.Nm -should be called with the -.Fl v -option. .Sh SEE ALSO .Xr geom 4 , .Xr gbde 8 , diff --git a/sbin/growfs/growfs.8 b/sbin/growfs/growfs.8 index 7c5e1cf..387e511 100644 --- a/sbin/growfs/growfs.8 +++ b/sbin/growfs/growfs.8 @@ -116,6 +116,24 @@ will enlarge .Pa /dev/vinum/testvol up to 2GB if there is enough space in .Pa /dev/vinum/testvol . +.Sh SEE ALSO +.Xr bsdlabel 8 , +.Xr dumpfs 8 , +.Xr fdisk 8 , +.Xr ffsinfo 8 , +.Xr fsck 8 , +.Xr newfs 8 , +.Xr tunefs 8 , +.Xr vinum 8 +.Sh HISTORY +The +.Nm +utility first appeared in +.Fx 4.4 . +.Sh AUTHORS +.An Christoph Herrmann Aq chm@FreeBSD.org +.An Thomas-Henning von Kamptz Aq tomsoft@FreeBSD.org +.An The GROWFS team Aq growfs@Tomsoft.COM .Sh BUGS The .Nm @@ -176,21 +194,3 @@ This read operation will provide unexpected data when using .Fl N . Therefore, this part cannot really be simulated and will be skipped in test mode. -.Sh SEE ALSO -.Xr bsdlabel 8 , -.Xr dumpfs 8 , -.Xr fdisk 8 , -.Xr ffsinfo 8 , -.Xr fsck 8 , -.Xr newfs 8 , -.Xr tunefs 8 , -.Xr vinum 8 -.Sh AUTHORS -.An Christoph Herrmann Aq chm@FreeBSD.org -.An Thomas-Henning von Kamptz Aq tomsoft@FreeBSD.org -.An The GROWFS team Aq growfs@Tomsoft.COM -.Sh HISTORY -The -.Nm -utility first appeared in -.Fx 4.4 . diff --git a/sbin/ifconfig/ifconfig.8 b/sbin/ifconfig/ifconfig.8 index d0da69d..b85a7a7 100644 --- a/sbin/ifconfig/ifconfig.8 +++ b/sbin/ifconfig/ifconfig.8 @@ -934,19 +934,6 @@ it (or have need for it). Messages indicating the specified interface does not exist, the requested address is unknown, or the user is not privileged and tried to alter an interface's configuration. -.Sh BUGS -Basic IPv6 node operation requires a link-local address on each -interface configured for IPv6. -Normally, such an address is automatically configured by the -kernel on each interface added to the system; this behaviour may -be disabled by setting the sysctl MIB variable -.Va net.inet6.ip6.auto_linklocal -to 0. -.Pp -If you delete such an address using -.Nm , -the kernel may act very oddly. -Do this at your own risk. .Sh SEE ALSO .Xr netstat 1 , .Xr netintro 4 , @@ -960,3 +947,16 @@ The .Nm utility appeared in .Bx 4.2 . +.Sh BUGS +Basic IPv6 node operation requires a link-local address on each +interface configured for IPv6. +Normally, such an address is automatically configured by the +kernel on each interface added to the system; this behaviour may +be disabled by setting the sysctl MIB variable +.Va net.inet6.ip6.auto_linklocal +to 0. +.Pp +If you delete such an address using +.Nm , +the kernel may act very oddly. +Do this at your own risk. diff --git a/sbin/init/init.8 b/sbin/init/init.8 index 4f08683..563f3c0 100644 --- a/sbin/init/init.8 +++ b/sbin/init/init.8 @@ -353,23 +353,6 @@ as follows: .Xr ttys 5 file .El -.Sh DIAGNOSTICS -.Bl -diag -.It "getty repeating too quickly on port %s, sleeping." -A process being started to service a line is exiting quickly -each time it is started. -This is often caused by a ringing or noisy terminal line. -.Bf -emphasis -Init will sleep for 30 seconds, -then continue trying to start the process. -.Ef -.It "some processes would not die; ps axl advised." -A process -is hung and could not be killed when the system was shutting down. -This condition is usually caused by a process -that is stuck in a device driver because of -a persistent device error condition. -.El .Sh FILES .Bl -tag -width /etc/rc.shutdown -compact .It Pa /dev/console @@ -388,6 +371,23 @@ system startup commands .It Pa /etc/rc.shutdown system shutdown commands .El +.Sh DIAGNOSTICS +.Bl -diag +.It "getty repeating too quickly on port %s, sleeping." +A process being started to service a line is exiting quickly +each time it is started. +This is often caused by a ringing or noisy terminal line. +.Bf -emphasis +Init will sleep for 30 seconds, +then continue trying to start the process. +.Ef +.It "some processes would not die; ps axl advised." +A process +is hung and could not be killed when the system was shutting down. +This condition is usually caused by a process +that is stuck in a device driver because of +a persistent device error condition. +.El .Sh SEE ALSO .Xr kill 1 , .Xr login 1 , diff --git a/sbin/ip6fw/ip6fw.8 b/sbin/ip6fw/ip6fw.8 index dbc9084..bce358c 100644 --- a/sbin/ip6fw/ip6fw.8 +++ b/sbin/ip6fw/ip6fw.8 @@ -553,6 +553,21 @@ or in short form without timestamps: .Xr reboot 8 , .Xr sysctl 8 , .Xr syslogd 8 +.Sh HISTORY +A +.Nm +utility first appeared in +.Fx 4.0 . +.Sh AUTHORS +.An Ugen J. S. Antsilevich , +.An Poul-Henning Kamp , +.An Alex Nash , +.An Archie Cobbs . +.Pp +.An -nosplit +API based upon code written by +.An Daniel Boulet +for BSDI. .Sh BUGS .Em WARNING!!WARNING!!WARNING!!WARNING!!WARNING!!WARNING!!WARNING!! .Pp @@ -565,18 +580,3 @@ do anything you don't understand. .Pp When manipulating/adding chain entries, service and protocol names are not accepted. -.Sh AUTHORS -.An Ugen J. S. Antsilevich , -.An Poul-Henning Kamp , -.An Alex Nash , -.An Archie Cobbs . -.Pp -.An -nosplit -API based upon code written by -.An Daniel Boulet -for BSDI. -.Sh HISTORY -A -.Nm -utility first appeared in -.Fx 4.0 . diff --git a/sbin/ipfw/ipfw.8 b/sbin/ipfw/ipfw.8 index cfceeb0..620f32c 100644 --- a/sbin/ipfw/ipfw.8 +++ b/sbin/ipfw/ipfw.8 @@ -2334,6 +2334,33 @@ the sleep terminates thus restoring the previous situation. .Xr reboot 8 , .Xr sysctl 8 , .Xr syslogd 8 +.Sh HISTORY +The +.Nm +utility first appeared in +.Fx 2.0 . +.Xr dummynet 4 +was introduced in +.Fx 2.2.8 . +Stateful extensions were introduced in +.Fx 4.0 . +.Nm ipfw2 +was introduced in Summer 2002. +.Sh AUTHORS +.An Ugen J. S. Antsilevich , +.An Poul-Henning Kamp , +.An Alex Nash , +.An Archie Cobbs , +.An Luigi Rizzo . +.Pp +.An -nosplit +API based upon code written by +.An Daniel Boulet +for BSDI. +.Pp +Work on +.Xr dummynet 4 +traffic shaper supported by Akamba Corp. .Sh BUGS The syntax has grown over the years and sometimes it might be confusing. Unfortunately, backward compatibility prevents cleaning up mistakes @@ -2363,30 +2390,3 @@ If a packet is reinserted in this manner, later rules may be incorrectly applied, making the order of .Cm divert rules in the rule sequence very important. -.Sh AUTHORS -.An Ugen J. S. Antsilevich , -.An Poul-Henning Kamp , -.An Alex Nash , -.An Archie Cobbs , -.An Luigi Rizzo . -.Pp -.An -nosplit -API based upon code written by -.An Daniel Boulet -for BSDI. -.Pp -Work on -.Xr dummynet 4 -traffic shaper supported by Akamba Corp. -.Sh HISTORY -The -.Nm -utility first appeared in -.Fx 2.0 . -.Xr dummynet 4 -was introduced in -.Fx 2.2.8 . -Stateful extensions were introduced in -.Fx 4.0 . -.Nm ipfw2 -was introduced in Summer 2002. diff --git a/sbin/mount/mount.8 b/sbin/mount/mount.8 index fe5c802..afefb25 100644 --- a/sbin/mount/mount.8 +++ b/sbin/mount/mount.8 @@ -412,16 +412,6 @@ Verbose mode. .It Fl w The file system object is to be read and write. .El -.Sh DIAGNOSTICS -Various, most of them are self-explanatory. -.Pp -.Dl XXXXX file system is not available -.Pp -The kernel does not support the respective file system type. -Note that -support for a particular file system might be provided either on a static -(kernel compile-time), or dynamic basis (loaded as a kernel module by -.Xr kldload 8 ) . .Sh ENVIRONMENT .Bl -tag -width ".Ev PATH_FSTAB" .It Ev PATH_FSTAB @@ -441,6 +431,16 @@ for more information.) .It Pa /etc/fstab file system table .El +.Sh DIAGNOSTICS +Various, most of them are self-explanatory. +.Pp +.Dl XXXXX file system is not available +.Pp +The kernel does not support the respective file system type. +Note that +support for a particular file system might be provided either on a static +(kernel compile-time), or dynamic basis (loaded as a kernel module by +.Xr kldload 8 ) . .Sh SEE ALSO .Xr getfacl 1 , .Xr setfacl 1 , @@ -468,8 +468,6 @@ file system table .Xr mount_umapfs 8 , .Xr mount_unionfs 8 , .Xr umount 8 -.Sh BUGS -It is possible for a corrupted file system to cause a crash. .Sh CAVEATS After a successful .Nm , @@ -484,3 +482,5 @@ A .Nm utility appeared in .At v1 . +.Sh BUGS +It is possible for a corrupted file system to cause a crash. diff --git a/sbin/mount_cd9660/mount_cd9660.8 b/sbin/mount_cd9660/mount_cd9660.8 index 416d589..7970ddd 100644 --- a/sbin/mount_cd9660/mount_cd9660.8 +++ b/sbin/mount_cd9660/mount_cd9660.8 @@ -140,15 +140,6 @@ The following command can be used to mount a Kodak Photo-CD: .Xr unmount 2 , .Xr fstab 5 , .Xr mount 8 -.Sh BUGS -POSIX device node mapping is currently not supported. -.Pp -Version numbers are not stripped if Rockridge extensions are in use. -In this case, accessing files that don't have Rockridge names without -version numbers gets the one with the lowest version number and not -the one with the highest. -.Pp -There is no ECMA support. .Sh HISTORY The .Nm @@ -158,3 +149,12 @@ utility first appeared in The Unicode conversion routine was added by .An Ryuichiro Imura Aq imura@ryu16.org in 2003. +.Sh BUGS +POSIX device node mapping is currently not supported. +.Pp +Version numbers are not stripped if Rockridge extensions are in use. +In this case, accessing files that don't have Rockridge names without +version numbers gets the one with the lowest version number and not +the one with the highest. +.Pp +There is no ECMA support. diff --git a/sbin/mount_nullfs/mount_nullfs.8 b/sbin/mount_nullfs/mount_nullfs.8 index 03060de..752040f 100644 --- a/sbin/mount_nullfs/mount_nullfs.8 +++ b/sbin/mount_nullfs/mount_nullfs.8 @@ -237,6 +237,11 @@ is that vnode arguments must be manually mapped. .Pp UCLA Technical Report CSD-910056, .Em "Stackable Layers: an Architecture for File System Development" . +.Sh HISTORY +The +.Nm +utility first appeared in +.Bx 4.4 . .Sh BUGS THIS FILE SYSTEM TYPE IS NOT YET FULLY SUPPORTED (READ: IT DOESN'T WORK) AND USING IT MAY, IN FACT, DESTROY DATA ON YOUR SYSTEM. @@ -250,8 +255,3 @@ hackers can apply by sending mail to .Aq hackers@FreeBSD.org and announcing their intent to take it over. -.Sh HISTORY -The -.Nm -utility first appeared in -.Bx 4.4 . diff --git a/sbin/mount_umapfs/mount_umapfs.8 b/sbin/mount_umapfs/mount_umapfs.8 index 1fe4765..1bbaadb 100644 --- a/sbin/mount_umapfs/mount_umapfs.8 +++ b/sbin/mount_umapfs/mount_umapfs.8 @@ -126,6 +126,11 @@ sophisticated. .Sh SEE ALSO .Xr mount 8 , .Xr mount_nullfs 8 +.Sh HISTORY +The +.Nm +utility first appeared in +.Bx 4.4 . .Sh BUGS THIS FILE SYSTEM TYPE IS NOT YET FULLY SUPPORTED (READ: IT DOESN'T WORK) AND USING IT MAY, IN FACT, DESTROY DATA ON YOUR SYSTEM. @@ -139,8 +144,3 @@ hackers can apply by sending mail to .Aq hackers@FreeBSD.org and announcing their intent to take it over. -.Sh HISTORY -The -.Nm -utility first appeared in -.Bx 4.4 . diff --git a/sbin/mount_unionfs/mount_unionfs.8 b/sbin/mount_unionfs/mount_unionfs.8 index 9bdcbe0..20f1451 100644 --- a/sbin/mount_unionfs/mount_unionfs.8 +++ b/sbin/mount_unionfs/mount_unionfs.8 @@ -181,6 +181,13 @@ accessible via .Xr fstab 5 , .Xr mount 8 , .Xr mount_nullfs 8 +.Sh HISTORY +The +.Nm +utility first appeared in +.Bx 4.4 . +It first worked in +.Fx Ns -(fill this in) . .Sh BUGS THIS FILE SYSTEM TYPE IS NOT YET FULLY SUPPORTED (READ: IT DOESN'T WORK) AND USING IT MAY, IN FACT, DESTROY DATA ON YOUR SYSTEM. @@ -207,10 +214,3 @@ Running .Xr find 1 over a union tree has the side-effect of creating a tree of shadow directories in the upper layer. -.Sh HISTORY -The -.Nm -utility first appeared in -.Bx 4.4 . -It first worked in -.Fx Ns -(fill this in) . diff --git a/sbin/newfs_msdos/newfs_msdos.8 b/sbin/newfs_msdos/newfs_msdos.8 index 9c6e002..a7de7ab 100644 --- a/sbin/newfs_msdos/newfs_msdos.8 +++ b/sbin/newfs_msdos/newfs_msdos.8 @@ -162,6 +162,8 @@ struct bsxbpb { u_int16_t bkbs; /* [-k] backup boot sector */ }; .Ed +.Sh EXIT STATUS +Exit status is 0 on success and 1 on error. .Sh EXAMPLES .Bd -literal -offset indent newfs_msdos /dev/ad0s1 @@ -182,8 +184,6 @@ on .Xr disklabel 8 , .Xr fdisk 8 , .Xr newfs 8 -.Sh EXIT STATUS -Exit status is 0 on success and 1 on error. .Sh HISTORY The .Nm diff --git a/sbin/nos-tun/nos-tun.8 b/sbin/nos-tun/nos-tun.8 index 9e7b9ae..f37c428 100644 --- a/sbin/nos-tun/nos-tun.8 +++ b/sbin/nos-tun/nos-tun.8 @@ -79,8 +79,6 @@ tunnel mode nos tunnel destination 192.168.59.34 tunnel source 192.168.56.45 .Ed -.Sh BUGS -We don't allow for setting our source address for multihomed machines. .Sh AUTHORS .An -nosplit .An Nickolay N. Dudorov Aq nnd@itfs.nsk.su @@ -89,3 +87,5 @@ wrote the program, wrote the man-page. .An Isao SEKI Aq iseki@gongon.com added a new flag, IP protocol number. +.Sh BUGS +We don't allow for setting our source address for multihomed machines. diff --git a/sbin/reboot/boot_i386.8 b/sbin/reboot/boot_i386.8 index d7b89c9..625af93 100644 --- a/sbin/reboot/boot_i386.8 +++ b/sbin/reboot/boot_i386.8 @@ -291,17 +291,6 @@ default kernel .It Pa /boot/kernel.old/kernel typical non-default kernel (optional) .El -.Sh SEE ALSO -.Xr ddb 4 , -.Xr ttys 5 , -.Xr boot0cfg 8 , -.Xr bsdlabel 8 , -.Xr btxld 8 , -.Xr config 8 , -.Xr halt 8 , -.Xr loader 8 , -.Xr reboot 8 , -.Xr shutdown 8 .Sh DIAGNOSTICS When disk-related errors occur, these are reported by the second-stage bootstrap using the same error codes returned by the BIOS, for example @@ -341,6 +330,17 @@ When a .Dq Disk error 0x1 is reported by the second-stage bootstrap, it generally means that this requirement has not been adhered to. +.Sh SEE ALSO +.Xr ddb 4 , +.Xr ttys 5 , +.Xr boot0cfg 8 , +.Xr bsdlabel 8 , +.Xr btxld 8 , +.Xr config 8 , +.Xr halt 8 , +.Xr loader 8 , +.Xr reboot 8 , +.Xr shutdown 8 .Sh BUGS The .Xr bsdlabel 5 diff --git a/sbin/restore/restore.8 b/sbin/restore/restore.8 index 1d57760..938de5f 100644 --- a/sbin/restore/restore.8 +++ b/sbin/restore/restore.8 @@ -367,6 +367,24 @@ preceded by its file type. Do not ask the user whether to abort the restore in the event of an error. Always try to skip over the bad block(s) and continue. .El +.Sh ENVIRONMENT +.Bl -tag -width ".Ev TMPDIR" +.It Ev TAPE +Device from which to read backup. +.It Ev TMPDIR +Name of directory where temporary files are to be created. +.El +.Sh FILES +.Bl -tag -width "./restoresymtable" -compact +.It Pa /dev/sa0 +the default tape drive +.It Pa /tmp/rstdir* +file containing directories on the tape. +.It Pa /tmp/rstmode* +owner, mode, and time stamps for directories. +.It Pa \&./restoresymtable +information passed between incremental restores. +.El .Sh DIAGNOSTICS The .Nm @@ -438,29 +456,16 @@ After a dump read error, may have to resynchronize itself. This message lists the number of blocks that were skipped over. .El -.Sh FILES -.Bl -tag -width "./restoresymtable" -compact -.It Pa /dev/sa0 -the default tape drive -.It Pa /tmp/rstdir* -file containing directories on the tape. -.It Pa /tmp/rstmode* -owner, mode, and time stamps for directories. -.It Pa \&./restoresymtable -information passed between incremental restores. -.El -.Sh ENVIRONMENT -.Bl -tag -width ".Ev TMPDIR" -.It Ev TAPE -Device from which to read backup. -.It Ev TMPDIR -Name of directory where temporary files are to be created. -.El .Sh SEE ALSO .Xr dump 8 , .Xr mount 8 , .Xr newfs 8 , .Xr rmt 8 +.Sh HISTORY +The +.Nm +utility appeared in +.Bx 4.2 . .Sh BUGS The .Nm @@ -502,8 +507,3 @@ be the same across different processes. In all other cases, the files are unique because it is possible to have two different dumps started at the same time, and separate operations shouldn't conflict with each other. -.Sh HISTORY -The -.Nm -utility appeared in -.Bx 4.2 . diff --git a/sbin/route/route.8 b/sbin/route/route.8 index 45ffd19..ba17bcc 100644 --- a/sbin/route/route.8 +++ b/sbin/route/route.8 @@ -355,6 +355,8 @@ and .Dv RTM_CHANGE . As such, only the super-user may modify the routing tables. +.Sh EXIT STATUS +.Ex -std .Sh DIAGNOSTICS .Bl -diag .It "add [host \&| network ] %s: gateway %s flags %x" @@ -393,8 +395,6 @@ operation resulted in a route whose gateway uses the same route as the one being changed. The next-hop gateway should be reachable through a different route. .El -.Sh EXIT STATUS -.Ex -std .Sh SEE ALSO .\".Xr esis 4 , .Xr netintro 4 , diff --git a/sbin/routed/routed.8 b/sbin/routed/routed.8 index afee816..25998c9 100644 --- a/sbin/routed/routed.8 +++ b/sbin/routed/routed.8 @@ -720,9 +720,6 @@ for distant gateways .%R XSIS 028112 .%Q Xerox System Integration Standard .Re -.Sh BUGS -It does not always detect unidirectional failures in network interfaces, -for example, when the output side fails. .Sh HISTORY The .Nm @@ -730,3 +727,6 @@ utility appeared in .Bx 4.2 . .\" LocalWords: loopback ICMP rtquery ifconfig multicasting Solicitations RIPv .\" LocalWords: netstat rdisc +.Sh BUGS +It does not always detect unidirectional failures in network interfaces, +for example, when the output side fails. diff --git a/sbin/savecore/savecore.8 b/sbin/savecore/savecore.8 index a17091c..c15c724 100644 --- a/sbin/savecore/savecore.8 +++ b/sbin/savecore/savecore.8 @@ -132,8 +132,6 @@ is meant to be called near the end of the initialization file .Pa /etc/rc (see .Xr rc 8 ) . -.Sh BUGS -The minfree code does not consider the effect of compression or sparse files. .Sh SEE ALSO .Xr gzip 1 , .Xr getbootfile 3 , @@ -144,3 +142,5 @@ The .Nm utility appeared in .Bx 4.1 . +.Sh BUGS +The minfree code does not consider the effect of compression or sparse files. diff --git a/sbin/slattach/slattach.8 b/sbin/slattach/slattach.8 index 616deb6..fbccd71 100644 --- a/sbin/slattach/slattach.8 +++ b/sbin/slattach/slattach.8 @@ -229,6 +229,19 @@ If you use a hard-wired connection rather than a modem, invoke with the .Fl l option in order to ignore carrier on the slip line. +.Sh FILES +.Bl -tag -width /usr/share/examples/slattach/* -compact +.It Pa /var/run/slattach.<tty>.pid +with +.Ar tty +replaced by the terminal path name component of +.Ar ttyname . +This file contains the numerical process ID of the +.Nm +process and can be examined by scripts in order to send a signal to +.Nm +.It Pa /usr/share/examples/slattach/* +.El .Sh EXAMPLES .Bd -literal -offset indent -compact slattach ttyd8 @@ -251,19 +264,6 @@ also logs failure to set the controlling terminal or failure to install signal handlers. Upon connection and redial the ttyname and baud rate are logged and on shutdown the ttyname is logged. -.Sh FILES -.Bl -tag -width /usr/share/examples/slattach/* -compact -.It Pa /var/run/slattach.<tty>.pid -with -.Ar tty -replaced by the terminal path name component of -.Ar ttyname . -This file contains the numerical process ID of the -.Nm -process and can be examined by scripts in order to send a signal to -.Nm -.It Pa /usr/share/examples/slattach/* -.El .Sh SEE ALSO .Xr netstat 1 , .Xr startslip 1 , diff --git a/sbin/swapon/swapon.8 b/sbin/swapon/swapon.8 index 2839122..73e17e1 100644 --- a/sbin/swapon/swapon.8 +++ b/sbin/swapon/swapon.8 @@ -146,16 +146,6 @@ environment variable is used if not specifically overridden. 512 byte blocks are used by default. .El -.Sh DIAGNOSTICS -These utilities may fail for the reasons described in -.Xr swapon 2 . -.Sh SEE ALSO -.Xr swapon 2 , -.Xr fstab 5 , -.Xr init 8 , -.Xr mdconfig 8 , -.Xr pstat 8 , -.Xr rc 8 .Sh FILES .Bl -tag -width ".Pa /dev/{ad,da}?s?b" -compact .It Pa /dev/{ad,da}?s?b @@ -166,6 +156,16 @@ memory disk devices .Tn ASCII file system description table .El +.Sh DIAGNOSTICS +These utilities may fail for the reasons described in +.Xr swapon 2 . +.Sh SEE ALSO +.Xr swapon 2 , +.Xr fstab 5 , +.Xr init 8 , +.Xr mdconfig 8 , +.Xr pstat 8 , +.Xr rc 8 .Sh HISTORY The .Nm swapon diff --git a/sbin/sysctl/sysctl.8 b/sbin/sysctl/sysctl.8 index 44fefa0..31e944a 100644 --- a/sbin/sysctl/sysctl.8 +++ b/sbin/sysctl/sysctl.8 @@ -235,6 +235,25 @@ denote .It "user.stream_max integer no .It "user.tzname_max integer no .El +.Sh FILES +.Bl -tag -width ".In netinet/icmp_var.h" -compact +.It In sys/sysctl.h +definitions for top level identifiers, second level kernel and hardware +identifiers, and user level identifiers +.It In sys/socket.h +definitions for second level network identifiers +.It In sys/gmon.h +definitions for third level profiling identifiers +.It In vm/vm_param.h +definitions for second level virtual memory identifiers +.It In netinet/in.h +definitions for third level Internet identifiers and +fourth level IP identifiers +.It In netinet/icmp_var.h +definitions for fourth level ICMP identifiers +.It In netinet/udp_var.h +definitions for fourth level UDP identifiers +.El .Sh EXAMPLES For example, to retrieve the maximum number of processes allowed in the system, one would use the following request: @@ -265,25 +284,6 @@ Information about the load average history may be obtained with: More variables than these exist, and the best and likely only place to search for their deeper meaning is undoubtedly the source where they are defined. -.Sh FILES -.Bl -tag -width ".In netinet/icmp_var.h" -compact -.It In sys/sysctl.h -definitions for top level identifiers, second level kernel and hardware -identifiers, and user level identifiers -.It In sys/socket.h -definitions for second level network identifiers -.It In sys/gmon.h -definitions for third level profiling identifiers -.It In vm/vm_param.h -definitions for second level virtual memory identifiers -.It In netinet/in.h -definitions for third level Internet identifiers and -fourth level IP identifiers -.It In netinet/icmp_var.h -definitions for fourth level ICMP identifiers -.It In netinet/udp_var.h -definitions for fourth level UDP identifiers -.El .Sh COMPATIBILITY The .Fl w @@ -293,13 +293,6 @@ option has been deprecated and is silently ignored. .Xr loader.conf 5 , .Xr sysctl.conf 5 , .Xr loader 8 -.Sh BUGS -The -.Nm -utility presently exploits an undocumented interface to the kernel -sysctl facility to traverse the sysctl tree and to retrieve format -and name information. -This correct interface is being thought about for the time being. .Sh HISTORY A .Nm @@ -310,3 +303,10 @@ In .Fx 2.2 , .Nm was significantly remodeled. +.Sh BUGS +The +.Nm +utility presently exploits an undocumented interface to the kernel +sysctl facility to traverse the sysctl tree and to retrieve format +and name information. +This correct interface is being thought about for the time being. diff --git a/sbin/tunefs/tunefs.8 b/sbin/tunefs/tunefs.8 index f84ea7b..3a1dd51 100644 --- a/sbin/tunefs/tunefs.8 +++ b/sbin/tunefs/tunefs.8 @@ -155,14 +155,14 @@ specified mount point. .%D August 1984 .%O "(reprinted in the BSD System Manager's Manual, SMM:5)" .Re +.Sh HISTORY +The +.Nm +utility appeared in +.Bx 4.2 . .Sh BUGS This utility should work on active file systems. .\" Take this out and a Unix Daemon will dog your steps from now until .\" the time_t's wrap around. .Pp You can tune a file system, but you can't tune a fish. -.Sh HISTORY -The -.Nm -utility appeared in -.Bx 4.2 . |
