diff options
Diffstat (limited to 'sbin/ipfw/README')
-rw-r--r-- | sbin/ipfw/README | 610 |
1 files changed, 610 insertions, 0 deletions
diff --git a/sbin/ipfw/README b/sbin/ipfw/README new file mode 100644 index 0000000..1cc296c --- /dev/null +++ b/sbin/ipfw/README @@ -0,0 +1,610 @@ +***************************************************************************** +27 Oct 94 +Hi again! +So thanx to Brian McGovern , i'v took this piece of code in hands again +and made some changes: + 1) Port to FreeBSD 2.0 , so we will not go after time. + 2) Some minor changes in kernel part to improve speed and such.. + 3) Chane in behaviour: now any recently added firewall definition + preferred on other matching but older firewalls. + REMEMBER: in any case universal IP firewall has larger preference + then special TCP/UDP/ICMP firewalls. + 4) Cosmetical changes to control programm. Now it is called ipfw. + 5) Changed ip_firewall.* to ip_fw.* in kernel,and shortened some long + variable names. + 6) From now on we have user defined *policy*,which is DENY/ACCEPT for + every packet which does not matches any of firewalls.I.e.: if any + firewall defined and packet does not match them you may set it up + so it will be anyway throwed or anyway accepted. +Mostly that's all. +Bye! + +-- + -= Ugen J.S.Antsilevich =- + NetVision - Commercial Internet Provider +-----------------------------------------------------[C]--- +NetVision - Home of Israeli Commercial Internet + E-mail: ugen@NetVision.net.il + HTTP: http://www.NetVision.net.il/~ugen/ + Phone: +972-4-550330 Fax: +972-4-550122 + +***************************************************************************** +10 Jul 94 +Hi again...So i sitted and stared at this nice working tool and thought to +myself that it's nice but something there it needs and have not.. +So i took a piece of file and a keyboard and typed some strings. +What it was is: + +o List facility improved...Now listing of currently installed firewall + entries does not go through kernel printf's ,which is really unnice to + one who runs it NOT from console:) + +o Really important facility of deleting entries added..Yes , till this + day you had to remove all entries and then add them one by one again + to remove actually just one.Now it's over:) + +o All this changes documented in this readme,while you will see where i + added my words just by vast number of mistaces in English.Well,i hope + you will forgive one Russian guy like me:) + +So enjoy this new code and if you think it needs some additions - you +are welcome to suggest.Also i made some more warnings , while compiling +this code,i have no a clue where do they come from,however they does not +make any bad to programm.But if you will find way to remove them,feel free +to do it and post anywhere(and notify me as i also need this:) + + Bye! Ugen J.S.Antsilevich + + +########################################################################## +# Ugen J.S.Antsilevich NetVision (Israel) System Staff Member # +#------------------------------------------------------------------------# +# Email: ugen@NetVision.net.il | Phone: 972-4-550330 # +# ugen@NetManage.co.il | Fax: 972-4-550122 # +#------------------------------------------------------------------------# +# WWW HomePage: http://www.NetVision.net.il/~ugen # +# Special : Volk@Les.Tambov.SU # +########################################################################## + + +***************************************************************************** +8 Jul 94 +OK..so first of all,this is simple port to FreeBSD by Ugen J.S.Antsilevich +Actually all i had to do is to find appropriate place in kernel source files +for ipfirewall stuff..so all your thanks should go to the author... +Anyway i am porting it now to 1.1.5 (not much job though..:) so if you want +to ask something about write to me: + +ugen@NetVision.net.il + +That's it and let the --==REAL==-- author speak... +***************************************************************************** + +Here's my ipfirewall facility. I consider it to still be beta quality mostly +because the various interfaces are pretty crude. Here's some information that +you'll probably find useful (in roughly the order in which you'll need to know +it). Some of this will be absurdly simplistic. Better safe than sorry... + +This software was written for BSD/386. The current version has been ported +to BSD/386 v1.1. The context diffs are with respect to that version of +BSD/386. If you don't have access to BSD/386 v1.1 and can't make sense out of +the diffs, contact me and I'll send you the entire files (they are copyrighted +by UC-Berkeley with very 'friendly' conditions). + +Speaking of copyrights, here's mine: + +/* + * Copyright (c) 1993 Daniel Boulet + * Copyright (c) 1994 Ugen J.S.Antsilevich + * + * Redistribution and use in source forms, with and without modification, + * are permitted provided that this entire comment appears intact. + * + * Redistribution in binary form may occur without any restrictions. + * Obviously, it would be nice if you gave credit where credit is due + * but requiring it would be too onerous. + * + * This software is provided ``AS IS'' without any warranties of any kind. + */ + +Enough introductory stuff, here we go... + + 1) The file IPFIREWALL is the configuration of kernel i use with + IPFIREWALL and GATEWAY options enabled. You may not find it useful. + About the only key things are that it enables the IPFIREWALL + option and the GATEWAY option. IPFIREWALL turns on my + stuff and GATEWAY turns your machine into an IP router. + + There is nothing magical about the name of this file or the + ident name for the kernel. + + 2) The files ip_fw.c and ip_fw.h are new files that should be + placed into the /usr/src/sys/netinet directory. + + 3) The files ip_input.c and raw_ip.c are new patched versions of the + same files , they made up for version 2.0 of FreeBSD,however it was + some pre-Beta release we worked on , so to add it to other releases + just find all parts of code surrounded by: + #ifdef IPFIREWALL + .... + #endif + and place in the appropriate places in the same files. + All those files are in /usr/src/sys/netinet directory of corse. + + 4) Add the line "netinet/ip_fw.c optional ipfirewall" to the + file /usr/src/sys/conf/files. This tells the config program to + include the netinet/ip_fw.c file if the IPFIREWALL option is + defined for a kernel. + + 5) The Makefile and ipfw.c files should go into directory probably + back in your home directory tree somewhere. If this ever becomes a + part of the system then they should go into the (newly created) + directory /usr/src/sbin/ipfw. + + 6) Build yourself a kernel, make a backup of the current kernel and + and install the new one. It should behave in a completely normal + fashion since you won't have defined any firewalls yet. + + 7) Explore the ipfw program. The smartest way to do this is to + compile the program and then run it.To do it you SHOULD be root + as the programm uses setsockopt on RAW sockets to define firewalls, + and also reads kernel symbols.If any other user will run ipw + it will detect that it isn't being run by root and will just + complain and exit. + The ipfw program takes command line parameters + and (assuming they are valid) issues a single appropriate setsockopt + call. If you're defining 5 firewalls then you'll have to run the + program 5 times. See below for a description of the command syntax + of ipfirewall. + + ==================================================================== + WARNING!!! WARNING!!! WARNING!!! WARNING!!! WARNING!!! WARNING!!! + The ipfw program can be used to put your machine into very + disfunctional state.So if you want to test it make sure you + a) Have read carifully this README till it's end. + b) First time run it from machine console,as else you can + simply shut down your own access to it. + ==================================================================== + Make sure that you never setup the program as setuid root!!! Instead, + always run it from the root command line or from "/etc/rc.local" + as part of the boot process. + + 8) Use the "ipfirewall" checkb or checkf command (see below) to pass some + test packets through the firewalls that you've defined. + + 9) You may find it useful to create a file in which the first line is + "ipfirewall flush" to flush any existing firewalls and the remaining + lines are the ipfirewall commands needed to define the firewalls that + you want to use. This will ensure that you're always working from a + known state. + + 10) If you've gotten this far then you're probably ready to let the critter + see prime time. Copy your file of ipfirewall commands into the + /etc/rc.local file and reboot the system. Once you're up, use the + ipfirewall list command to see that you've got the firewalls that you + wanted and try to test the firewall with real packets from trusted + and untrusted hosts. + +Enough of that. Here's the syntax for the ipfirewall command. It is rather +complex and yet simple at the same time (if you know what I mean). There +are seven sub-commands. Probably the easiest way to get into this is to give +you a roughly BNF style grammar for the command (curly brackets are used for +precedence, alternatives are separated by |, optional things are enclosed +in square brackets, white space is required if it appears below and must +not appear if there isn't any between the tokens below (i.e. no white space +around periods, colons or slashes, whitespace required between all other +tokens)): + + command ::= ipfirewall <list> | <flush> | <check> | <add> | <del> + + <list> ::= list + + <flush> ::= flush + + <check> ::= { checkb[locking] | checkf[orwarding] } <chkparms> + + <add> ::= { addb[locking] | addf[orwarding] } <add-del-parms> + + <del> ::= { delb[locking] | delf[orwarding] } <add-del-parms> + + <chkparms> ::= <protocol> from <ipaddr> <port> to <ipaddr> <port> + + <protocol> ::= tcp | udp + + <ipaddr> ::= <int>.<int>.<int>.<int> | <hostname> + + <hostname> ::= a host name from /etc/hosts + + <port> ::= <int> | <service> + + <service> ::= a service from /etc/services + + <int> ::= a non-negative integer + + <add-del-parms> ::= { accept | deny } { <universal_firewall> | <protocol_firewall> } + + <universal_firewall> ::= all from <masked_ipaddr> to <masked_ipaddr> + + <masked_ipaddr> ::= { <ipaddr>/<bits> } | { <ipaddr>:<ipaddr> } | <ipaddr> + + <bits> ::= integer in the range 0 to 32 inclusive + + <protocol_firewall> ::= <protocol> from <end_firewall> to <end_firewall> + + <end_firewall> ::= <masked_ipaddr> <port_list> + + <port_list> ::= [ <port>:<port> ] <sub_port_list> + + <sub_port_list> ::= <port> [ <sub_port_list> ] + +Although I think that the above grammar is complete, it isn't exactly what +one would call easy to comprehend! Here's the basic idea along with what +each of the forms mean: + + The "ipfirewall list" command prints a list of the firewalls on both the + forwarding and blocking chain in some more or less understudable format. + + The "ipfirewall flush" command empties the two firewall chains. + + The "ipfirewall addblocking" and "ipfirewall addforwarding" commands take + a firewall description and add the firewall to the appropriate firewall + chain.Take notice,that if you will add some description more then once, + it will take more then one entry in memory.It does not lead to significant + slow down of computer operation though. + + The "ipfirewall delblocking" and "ipfirewall delforwarding" commands take + a firewall description and deletes the firewall from the appropriate + firewall chain.The description must be exactly the same as it was defined + by add command.One delete command removes ALL same entries from firewall + chains. + + There are two basic kinds of firewall descriptions. Universal firewall + descriptions match all IP packets between specified pairs of hosts. + Universal firewalls only check IP addresses (i.e. they match any combination + of protocol and port numbers). Protocol-specific firewalls match either + TCP/IP or UDP/IP packets between specified pairs of hosts. In addition + to host descriptions, protocol-specific firewalls optionally take a + description of which port numbers to match. + + A host description consists of an IP address and a mask. The IP address + is specified as either a domain name or in the familiar + nn.nn.nn.nn format. The mask indicates how much of the IP address + should be looked at when vetting packets. There are two ways to + specify the mask. The first way is to suffix the IP address in the + firewall with a slash and an integer in the range 0 through 32 inclusive. + This integer is taken to be the number of high order bits of the IP + address which are to be checked (for example, 192.153.211.0/24 checks + the top 24 bits of the IP address, 192.153.211.17/32 checks all the + bits and 0.0.0.0/0 checks none of the bits (i.e. all IP addresses are + matched by this example)). The second way to specify a mask is to + suffix the IP address with a colon followed by another IP address. + This second address is the mask. Specifications equivalent to the + above three examples using this syntax would be + + 192.153.211.0:255.255.255.0 + 192.153.211.17:255.255.255.255 + 0.0.0.0:0.0.0.0 + + The first form is taken from the syntax accepted by a Telebit NetBlazer. + The second form is more along the lines of how a netmask is specified + in /etc/netmasks. Finally, if no mask is specified then a mask of all + 1's is supplied (i.e. no mask is equivalent to /32 or :255.255.255.255). + + The optional description of port numbers to mask can take three forms. + The simplest form is to omit the list in which case all port numbers + match. The next form is to specify a list of port numbers (either as + positive integers or service names from /etc/services). The final form + is actually a special case of the second form in which the first pair + of port numbers is separated by a colon instead of white space. This + pair specifies a range of port numbers (i.e. x:y specifies that all + ports between x and y inclusive should match). A port description + matches a particular port number if any of the following is true: + + - the port description is null + - the first pair of port numbers is a range and the port number + is in the range (inclusive) + - the port number is equal to any of the port numbers in the list + + There is a limit of a total of 10 port numbers in the source and + destination port lists. This limit is arbitrary and easy to increase. + It is determined by the value of the IP_FIREWALL_MAX_PORTS #define + variable in ip_firewall.h. Each increase of 1 for this value adds two + bytes to the size of each firewall. Since the size of a firewall is only + slightly over 30 bytes right now, this limit of 10 could probably + be increased by quite a bit before it became a concern. I've been + thinking of increasing it to 20 which would be longer than any + reasonable firewall would need and would only consume 20 more bytes + per firewall. The counter argument to any increase is that it is + always possible to construct an equivalent set of two or more firewalls + that behaves like a single firewall with a really long port list. + + This probably all sounds hopelessly complicated. It is actually not + all that tricky (I'm just not very good at explaining it yet). A few + examples will probably help a lot now: + + Block all IP packets originating from the host hackers-den: + + ipfirewall addb deny all from hackers-den to 0.0.0.0/0 + + Block all telnet packets to our telnet server from anywhere: + + ipfirewall addb deny tcp from 0.0.0.0/0 to mymachine/32 telnet + + Don't forward telnet, rlogin and rsh packets onto our local + class C network: + + ipfirewall addf deny tcp from 0.0.0.0/0 to ournetwork/24 telnet login shell + + Don't let anyone on the local machine or any machine inside + our local network ftp access to games.com: + + ipfirewall addb deny tcp from games.com ftp to 0.0.0.0/0 + + This last one might look a little strange. It doesn't prevent + anyone from sending packets to the games.com ftp server. What it + does do is block any packets that the games.com ftp server sends + back! + + The "ipfirewall checkblocking" and "ipfirewall checkforwarding" commands + take a description of an IP packet and check to see if the blocking + or forwarding chain of firewalls respectively accept or reject the packet. + It is used to make sure that the firewalls that you've defined work as + expected. The basic syntax is probably best understood by looking at + a couple of examples: + + ipfirewall checkb from bsdi.com 3001 to mymachine telnet + + checks to see if the blocking firewall will block a telnet packet from + a telnet session originating on bsdi.com to the host mymachine will be + blocked or not. Note that someone connecting to our telnet server + could be using practically any port number. To be really sure, the + firewall used to prevent access should be as simple as possible and/or + you should try a variety of port numbers in addition to the rather + arbitrarily chosen port of 3001. + + One final note on the check* ,add* and del* command syntax. The noise word + "to" exists in the syntax so that I can detect the end of a list of + port numbers in the from description. Since I needed a noise word to + detect this case, I added the noise word "from" in front of the from + case for consistency. + + Finally, have a look at the file "filters". It is the set of filters + that I run at home.<Danny> + Also check "scripts",where individual access restrictions written. + We use those for our dial-in PPP/SLIP users,to allow some of them + to access our internal networks,while disallowing other.This way we + open access to user's IP,when he enters the system ,and shut it + down when he leaves.All those changes may be applyed at any time, + and so entries added and deleted from firewall while system is + is working.No any side effects will arise.<Ugen> + +Now for a bit of a description of how the firewalls are applied (i.e. what +happens in the kernel): + + When an IP packet is received, the ipintr() routine in ip_input.c is + called. This routine does a bit of basic error checking. If it + detects any errors in the packet it generally drops the packet on + the floor. The idea behind the ipfirewall facility is to treat packets + that we don't want to accept as bad packets (i.e. drop them on the + floor). The ipfirewall facility intercedes in the normal processing + at two points. Just after the basic sanity checks are done, we pass + any packets not targeted at the loopback network (127.0.0.0/8) to the + firewall checker along with the chain of blocking firewalls.If the firewall + checker tells us to block the packet then we branch to the "bad:" label + in ipintr() which is where all bad packets are dropped on the floor. + Otherwise, we allow normal processing of the packet to continue. The + exact point at which we intercede was chosen to be after the basic + sanity checking and before the option processing is done. We want to + be after the basic sanity checking so that we don't have to be able + to handle complete garbage. We want to be before the option processing + because option processing is done in separate rather complex routine. + Why bother doing this special processing if we might be dropping the + packet? + + The second point at which we intercede is when a packet is about to be + forwarded to another host. All such packets are passed to the ip_forward + routine. The ipfirewall code is at the very top of this routine. If + the packet isn't targetted at the loopback interface (is it possible + that it could be when we reach this point? I doubt it but safety first) + then pass the packet to the firewall checker along with the forwarding + firewall chain. If the firewall checker indicates that the packet should + not be forwarded then we drop in (using code copied from a few lines + further into the routine which drops broadcast packets which are not + to be forwarded). + +There are a couple of consequences of this approach: + + 1) Packets which are blocked are never forwarded (something to keep + in mind when designing firewalls). + 2) Packets targeted at the loopback interface (127.0.0.0/8) are never + blocked. Blocking packets to the loopback interface seems pointless + and potentially quite confusing. It also makes a possibly common + case very cheap. + 3) The sender of a packet which is blocked receives no indication that + the packet was dropped. The Telebit NetBlazer can be configured to + silently drop a blocked packet or to send back a "you can't get there + from here" packet to the sender. Implementing the later would have + been more work (possibly quite a bit more, I don't really know). Also, + I don't see any reason to give a potential hacker any more information + than necessary. Dropping the packet into the bit bucket seems like + the best way to keep a hacker guessing.<Danny> + Well,anyway i working on this feature.It would be made optional and + configurable by some ICMP_UNREACH_ON_DROP or like this.<Ugen> + +Now for some details on how the firewall checker works: + + The firewall checker takes two parameters. The first parameter is a pointer + to the packet in question. The second parameter is a pointer to the + appropriate firewall chain. At the present time, the firewall checker passes + these parameters to a second routine which is the real firewall checker. + If the real checker says NO then an appropriate message is printed + onto the console. This is useful for debugging purposes. Whether or + not it remains in the long term depends on whether it is considered useful + for logging purposes (I'm a little reluctant to leave it in since it + provides a hacker with a way to commit a "denial of service" offense + against you by filling up your /var/log/messages file's file system + with error messages. There are ways of preventing this but ...<Danny>). + In default configuration now no information about dropped packets + printed.You may,however,define it,as i do by adding + option IPFIREWALL_VERBOSE + to your kernel configuration file.Very useful thingy!<Ugen> + + A return value of 0 from this routine (or the real firewall checker) + indicates that the packet is to be dropped. A value of 1 indicates + that the packet is to be accepted. In the early testing stages you + might want to make the top level firewall checker always return 1 even + if the real checker returns 0 just in case the real firewall checker + screws up (or your firewalls aren't as well designed as they should be). + In fact, this might be a useful optional feature (providing a way to + leave a door unlocked doesn't seem all that wise but it has to be + balanced against the inconvenience to legitimate users who might get + screwed up by poorly designed firewalls). + + The real firewall returns 1 (accept the packet) if the chain is empty. If + efficiency is a concern (which it is in this code), this check should + be done in ip_input.c before calling the firewall checker. + + Assuming that there is a firewall chain to scan through, the real firewall + checker picks up the src and dst IP addresses from the IP packet. It + then goes through the firewall chain looking for the first firewall that + matches the packet. Once a matching firewall has been found, a value of + 1 is returned if the firewall is an accept firewall and a value of 0 is + returned otherwise. + + The following processing is done for each firewall on the chain: + + 1) check the src and dst IP addresses. If they don't match then + there isn't any point in looking any further at this firewall. + This check is done by anding the packet's IP addresses the + with appropriate masks and comparing the results to the + appropriate addresses in the firewall. Note that the mask is + NOT applied to the address in the firewall. If it has any 1 + bits that are 0 bits in the mask then the firewall will never + match (this will be checked in ipfirewall soon). If the addresses + match then we continue with the next step. + + 2) If the firewall is a universal firewall then we've got a match. + Return either 0 or 1 as appropriate. Otherwise, continue with + the next step. + + 3) Examine the IP protocol from the packet. If we havn't had to + look at it before then we get it and set a local variable to + IP_FIREWALL_TCP for TCP/IP packets, IP_FIREWALL_UDP for UDP/IP + packets, IP_FIREWALL_ICMP for ICMP packets, and IP_FIREWALL_UNIVERSAL + for all other packet types. Also, if the packet is a TCP/IP or + a UDP/IP packet, save the source and destination port numbers + at this point (taking advantage of the fact that the port numbers + are stored in the same place in either a TCP/IP or a UDP/IP + packet header). If the packet is neither a TCP/IP or a UDP/IP + packet then this firewall won't match it (on to the next firewall). + If this packet's protocol doesn't match this firewall's protocol + (which can't be universal or we wouldn't be here) then on to + the next firewall. Otherwise, continue with the next step. + + 4) We're checking either a TCP/IP or a UDP/IP packet. If the + firewall's source port list is empty or the packet's source + port matches something in the source port list AND if the firewall's + destination port list is empty or the packet's destination + port matches something in the destination port list then + we've got a match (return 0 or 1 as appropriate). Otherwise, + on to the next firewall. + + As indicated above, if no packet on the chain matches the packet then + it is accepted if the first firewall was a deny firewall and it is rejected + if the first firewall was an accept packet. This is equivalent to the + default behaviour of a Telebit NetBlazer. They provide a way to override + this behaviour. I'm not convinced that it is necessary (I'm open to + suggestions). + +That's about it for the firewall checker. The ipfirewall program communicates +with the kernel part of the firewall facility by making setsockopt calls +on RAW IP sockets. Only root is allowed to open a RAW IP socket. This +ensures that only root uses ipfirewall to manipulate the firewall facility. +Also, somewhere in the kernel source or on a man page, I read that the +RAW IP setsockopt calls are intended for manipulating the IP protocol layer +as opposed to manipulating any particular instance of a socket. This seems +like a reasonable description of what the firewall setsockopt command +codes do. + +There are seven setsockopt command codes defined by the firewall facility +(in netinet/in.h). They are: + + IP_FLUSH_FIREWALLS flush (i.e. free) both firewall chains. + + IP_ADD_FORWARDING_FIREWALL add firewall pointed at by optval parm to + the end of the forwarding firewall chain. + + IP_ADD_BLOCKING_FIREWALL add firewall pointed at by optval parm to + the end of the blocking firewall chain. + + IP_DEL_FORWARDING_FIREWALL delete firewall pointed at by optval parm + from the forwarding firewall chain. + + IP_DEL_BLOCKING_FIREWALL delete firewall pointed at by optval parm + from the blocking firewall chain. + + IP_CHECK_FORWARDING_FIREWALL pass the IP packet do the firewall checker + along with the forwarding firewall chain. + Return 0 if packet was accepted, -1 (with + errno set to EACCES) if it wasn't. + + IP_CHECK_BLOCKING_FIREWALL pass the IP packet do the firewall checker + along with the blocking firewall chain. + Return 0 if packet was accepted, -1 (with + errno set to EACCES) if it wasn't. + + The IP_ADD_* and IP_DEL_* command codes do a fair bit of validity checking. + It is quite unlikely that a garbage firewall could get past them that + would cause major problems in the firewall checker. It IS possible for + a garbage packet to get past the checks which causes major grief because + it either blocks or accepts packets according to unusual rules (the rules + will conform to the ones described above but will probably come as quite + a surprise). + + The IP_CHECK_* command codes expect the optval parameter to point + to a struct ip immediately followed by a header appropriate to the protocol + value described in the ip_p field of the ip header. The exact requirements + are as follows: + + - The length of the optval parameter must be at least + + sizeof(struct ip) + 2 * sizeof(u_short) + + since this is the amount of memory that might be referenced by + the firewall checker. + + - The ip_hl field of the ip structure must be equal to + + sizeof(struct ip) / sizeof(int) + + since this value indicates that the tcp/udp/??? header immediately + follows the ip header (appropriate for the purposes that this + interface is intended for). + + Failure to follow these rules (for either the IP_ADD_*,IP_DEL_* or the + IP_CHECK_*_FIREWALL commands) will result in a return value of -1 with + errno set to EINVAL (for now, it will also result in an appropriate + message on the console). + + To read current configuration of firewalls,the kvm_read() function used. + Symbols,which you have to find are : + struct ip_firewall * ip_firewall_blocking_chain ; + struct ip_firewall * ip_firewall_forwarding_chain ; + Both are pointers to the linked list of firewall entries. + Of corse you have to be at least kmem group member,to read kernel symbols. + +That's about all that I can think of for now. There are a couple of details +that are worth reading about in the ip_firewall.h file. Other than that, let +me know how you do. If you have any problems, give me a call at home (403 +449-1835) or send me e-mail at "danny@BouletFermat.ab.ca". If you call, please +keep in mind that I live in the Canadian Mountain timezone (GMT-0600). + +-Danny + +So that's it..if you want to say something to me-call me or mail: +Phone: 972-4-550-330 +E-mail ugen@NetVision.net.il +If you call,remember that i live in Israel timezone which is GMT+02. + +-Ugen + |