diff options
Diffstat (limited to 'sbin/etherswitchcfg/etherswitchcfg.8')
| -rw-r--r-- | sbin/etherswitchcfg/etherswitchcfg.8 | 45 |
1 files changed, 44 insertions, 1 deletions
diff --git a/sbin/etherswitchcfg/etherswitchcfg.8 b/sbin/etherswitchcfg/etherswitchcfg.8 index 88e06f7..0d18638 100644 --- a/sbin/etherswitchcfg/etherswitchcfg.8 +++ b/sbin/etherswitchcfg/etherswitchcfg.8 @@ -11,12 +11,16 @@ .Ar info .Nm .Op Fl "f control file" +.Ar config +.Ar command parameter +.Nm +.Op Fl "f control file" .Ar phy .Ar phy.register[=value] .Nm .Op Fl "f control file" .Ar port%d -.Ar command parameter +.Ar [flags] command parameter .Nm .Op Fl "f control file" .Ar reg @@ -46,6 +50,14 @@ Produce more verbose output. Without this flag, lines that represent inactive or empty configuration options are omitted. .El +.Ss config +The config command provides access to global switch configuration +parameters. +It support the following commands: +.Bl -tag -width ".Ar vlan_mode mode" -compact +.It Ar vlan_mode mode +Sets the switch VLAN mode (depends on the hardware). +.El .Ss phy The phy command provides access to the registers of the PHYs attached to or integrated into the switch controller. @@ -75,6 +87,37 @@ for details on and .Ar mediaopt . .El +And the following flags (please note that not all flags +are supporterd by all switch drivers): +.Bl -tag -width ".Ar addtag" -compact +.It Ar addtag +Add VLAN tag to each packet sent by the port. +.It Ar -addtag +Disable the add VLAN tag option. +.It Ar striptag +Strip the VLAN tags from the packets sent by the port. +.It Ar -striptag +Disable the strip VLAN tag option. +.It Ar firstlock +This options makes the switch port lock on the first MAC address it seems. +After that, usually you need to reset the switch to learn different +MAC addresses. +.It Ar -firstlock +Disable the first lock option. Note that sometimes you need to reset the +switch to really disable this option. +.It Ar dropuntagged +Drop packets without a VLAN tag. +.It Ar -dropuntagged +Disable the drop untagged packets option. +.It Ar doubletag +Enable QinQ for the port. +.It Ar -doubletag +Disable QinQ for the port. +.It Ar ingress +Enable the ingress filter on the port. +.It Ar -ingress +Disable the ingress filter. +.El .Ss reg The reg command provides access to the registers of the switch controller. .Ss vlangroup |
