diff options
Diffstat (limited to 'sbin/camcontrol/camcontrol.8')
-rw-r--r-- | sbin/camcontrol/camcontrol.8 | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/sbin/camcontrol/camcontrol.8 b/sbin/camcontrol/camcontrol.8 index 453999e..abd30e0 100644 --- a/sbin/camcontrol/camcontrol.8 +++ b/sbin/camcontrol/camcontrol.8 @@ -285,7 +285,7 @@ argument), the given bus (XPT_SCAN_BUS), or bus:target:lun The user may specify a scan of all busses, a single bus, or a lun. Scanning all luns -on a target isn't supported. +on a target is not supported. .It Ic reset Tell the kernel to reset all busses in the system (with the .Ar all @@ -313,14 +313,14 @@ required. Most drives support the physical sector format. Some drives support the logical block format. -Many drives, if they don't support the +Many drives, if they do not support the requested format, return the data in an alternate format, along with sense -information indicating that the requested data format isn't supported. +information indicating that the requested data format is not supported. The .Nm utility attempts to detect this, and print out whatever format the drive returns. -If the drive uses a non-standard sense code to report that it doesn't +If the drive uses a non-standard sense code to report that it does not support the requested format, .Nm will probably see the error as a failure to complete the request. @@ -492,7 +492,7 @@ switch for this .Nm subcommand is described below. .It Fl q -Be quiet, and don't report the number of tags. +Be quiet, and do not report the number of tags. This is generally used when setting the number of tags. .It Fl v @@ -566,7 +566,7 @@ The meaning of the flag for the .Ic negotiate command is described below. -Also, some controller drivers don't support +Also, some controller drivers do not support setting negotiation parameters, even if the underlying controller supports negotiation changes. Some controllers, such as the Advansys wide @@ -584,9 +584,9 @@ Enable or disable disconnection. .It Fl O Ar offset Set the command delay offset. .It Fl q -Be quiet, don't print anything. +Be quiet, do not print anything. This is generally useful when you want to -set a parameter, but don't want any status information. +set a parameter, but do not want any status information. .It Fl R Ar syncrate Change the synchronization rate for a device. The sync rate is a floating @@ -655,7 +655,7 @@ Some hard disks will complete a format operation in a very short period of time (on the order of 5 minutes or less). This is often because the drive -doesn't really support the FORMAT UNIT command -- it just accepts the +does not really support the FORMAT UNIT command -- it just accepts the command, waits a few minutes and then returns it. .Pp The @@ -669,7 +669,7 @@ arguments can be useful for scripts. .Pp .Bl -tag -width 6n .It Fl q -Be quiet, don't print any status messages. +Be quiet, do not print any status messages. This option will not disable the questions, however. To disable questions, use the @@ -697,7 +697,7 @@ will issue a non-immediate format command, and will be unable to print any information to let the user know what percentage of the disk has been formatted. .It Fl y -Don't ask any questions. +Do not ask any questions. By default, .Nm will ask the user if he/she really wants to format the disk in question, @@ -853,7 +853,7 @@ in .Sh AUTHORS .An Kenneth Merry Aq ken@FreeBSD.org .Sh BUGS -The code that parses the generic command line arguments doesn't know that +The code that parses the generic command line arguments does not know that some of the subcommands take multiple arguments. So if, for instance, you tried something like this: |