diff options
Diffstat (limited to 'rules/BASIC_2.FW')
| -rw-r--r-- | rules/BASIC_2.FW | 72 |
1 files changed, 72 insertions, 0 deletions
diff --git a/rules/BASIC_2.FW b/rules/BASIC_2.FW new file mode 100644 index 0000000..46564f0 --- /dev/null +++ b/rules/BASIC_2.FW @@ -0,0 +1,72 @@ +#!/sbin/ipf -f - +# +# SAMPLE: PERMISSIVE FILTER RULES +# +# THIS EXAMPLE IS WRITTEN FOR IP FILTER 3.3 +# +# ppp0 - (external) PPP connection to ISP, address a.b.c.d/32 +# +# ed0 - (internal) network interface, address w.x.y.z/32 +# +# This file contains the basic rules needed to construct a firewall for the +# above situation. +# +#------------------------------------------------------- +# *Nasty* packets we don't want to allow near us at all! +# short packets which are packets fragmented too short to be real. +block in log quick all with short +#------------------------------------------------------- +# Group setup. +# ============ +# By default, block and log everything. This maybe too much logging +# (especially for ed0) and needs to be further refined. +# +block in log on ppp0 all head 100 +block out log on ppp0 all head 150 +block in log on ed0 from w.x.y.z/24 to any head 200 +block out log on ed0 all head 250 +#------------------------------------------------------- +# Invalid Internet packets. +# ========================= +# +# Deny reserved addresses. +# +block in log quick from 10.0.0.0/8 to any group 100 +block in log quick from 192.168.0.0/16 to any group 100 +block in log quick from 172.16.0.0/12 to any group 100 +# +# Prevent IP spoofing. +# +block in log quick from a.b.c.d/24 to any group 100 +# +#------------------------------------------------------- +# Localhost packets. +# ================== +# packets going in/out of network interfaces that aren't on the loopback +# interface should *NOT* exist. +block in log quick from 127.0.0.0/8 to any group 100 +block in log quick from any to 127.0.0.0/8 group 100 +block in log quick from 127.0.0.0/8 to any group 200 +block in log quick from any to 127.0.0.0/8 group 200 +# And of course, make sure the loopback allows packets to traverse it. +pass in quick on lo0 all +pass out quick on lo0 all +#------------------------------------------------------- +# Allow any communication between the inside network and the outside only. +# +# Allow all outgoing connections (SSH, TELNET, FTP, WWW, gopher, etc) +# +pass in log quick proto tcp all flags S/SA keep state group 200 +# +# Support all UDP `connections' initiated from inside. +# +# Allow ping out +# +pass in log quick proto icmp all keep state group 200 +#------------------------------------------------------- +# Log these: +# ========== +# * return RST packets for invalid SYN packets to help the other end close +block return-rst in log proto tcp from any to any flags S/SA group 100 +# * return ICMP error packets for invalid UDP packets +block return-icmp(net-unr) in proto udp all group 100 |
