diff options
Diffstat (limited to 'release')
| -rw-r--r-- | release/picobsd/bridge/crunch.conf | 116 |
1 files changed, 48 insertions, 68 deletions
diff --git a/release/picobsd/bridge/crunch.conf b/release/picobsd/bridge/crunch.conf index 3db93ba..d0699fc 100644 --- a/release/picobsd/bridge/crunch.conf +++ b/release/picobsd/bridge/crunch.conf @@ -48,13 +48,13 @@ srcdirs /usr/src/libexec # variables contain the list of sources and objects, and so on. # init is almost always necessary. -progs init # 4KB. +progs init # fsck is almost always necessary, unless you have everything on the # image and use 'tar' or something similar to read/write raw blocks # from the floppy. -progs fsck # 24KB. +progs fsck # ifconfig is needed if you want to configure interfaces... -progs ifconfig # 4KB. +progs ifconfig # # You will also need a shell and a bunch of utilities. # The standard shell is not that large, but you need many @@ -64,114 +64,94 @@ progs ifconfig # 4KB. # no additional memory. # There are a few exceptions such as 'less', which in 4.x is # rather large. -progs sh # 36KB. +progs sh ln sh -sh -progs echo # 0KB. +progs echo progs pwd progs mkdir rmdir progs chmod chown -progs mv ln # 0KB. +progs mv ln progs mount -progs minigzip # 0KB. +progs minigzip ln minigzip gzip -progs cp # 0KB. +progs cp progs rm progs ls progs kill -progs df # 0KB. -progs ps # 4KB. -progs ns # 4KB. +progs df +progs ps +progs ns ln ns netstat -progs vm # 0KB. -progs cat # 0KB. -progs test # 0KB. +progs vm +progs cat +progs test ln test [ -progs hostname # 0KB. -progs login # 4KB. -progs getty # 4KB. -progs stty # 4KB. -progs w # 0KB. -progs msg # 0KB. +progs hostname +progs login +progs getty +progs stty +progs w +progs msg ln msg dmesg -progs reboot # 0KB. -progs less # 36KB +progs reboot +progs less #ln less more -#progs more # 12KB +#progs more special more srcdir /usr/ports/misc/44bsd-more/work progs sysctl -progs swapon # 0KB. -progs pwd_mkdb # 0KB. +progs swapon +progs pwd_mkdb progs umount -progs du # 0KB. -progs tail # 0KB. -progs tee # 0KB. -progs passwd # 0KB. +progs du +progs tail +progs tee +progs passwd -progs route # 8KB +progs route # progs mount_msdosfs # progs comcontrol # # If you want to run natd, remember the alias library -#progs natd # 20KB +#progs natd #libs -lalias # natd # # ppp is rather large. Note that as of Jan.01, RELEASE_CRUNCH # makes ppp not use libalias, so you cannot have aliasing. -#progs ppp # 112KB +#progs ppp # You need an editor. ee is relatively small, though there are # smaller ones. vi is much larger. # The editor also usually need a curses library. -progs ee # 32KB. +progs ee libs -lncurses -# progs vi # ?? +# progs vi # libs -lcurses # for vi -#progs tcpdump # 100KB. +#progs tcpdump special tcpdump srcdir /usr/src/usr.sbin/tcpdump/tcpdump -progs arp # 0KB. +progs arp -progs bsdlabel # 4KB. -progs fdisk # 4KB. -progs vnconfig # 0KB. +progs bsdlabel +progs fdisk +progs mdconfig -#progs grep # 16KB. -progs date # 4KB. -#progs mount_nfs # 0KB. +#progs grep +progs date +#progs mount_nfs ln mount_nfs nfs -progs ping # 4KB. -#progs routed # 32KB. -progs ipfw # 12KB. -progs traceroute # 0KB. -# progs mount_cd9660 # 4KB. +progs ping +#progs routed +progs ipfw +progs traceroute +# progs mount_cd9660 # ln mount_cd9660 cd9660 -# progs newfs # 12KB. +# progs newfs #ln newfs mount_mfs ln chown chgrp # ln mount_msdosfs msdos -# If you need to access the box remotely, and maybe copy files -# from/to it, you can use telnet, rsh or ssh. -# inetd is only needed for telnet and rshd -#progs inetd # 12KB. -#progs telnet # 20KB. -#progs telnetd # 12KB. -#progs ftp # 28KB. -#progs tar # 32KB. - -# Check the ssh license! If you want to use this, -# go to /usr/ports/security/ssh-picobsd, do a make extract configure -# You also need to install /usr/ports/math/libgmp-freebsd -#progs sshd # includes ssh and scp -special sshd objvar SSHD_OBJS -special sshd srcdir /usr/ports/picobsd/ssh-picobsd/work/ssh-1.2.27 -special sshd objdir /usr/ports/picobsd/ssh-picobsd/work/ssh-1.2.27 -ln sshd ssh -ln sshd ssh1 -ln sshd scp -#libs /usr/local/lib/libgmp.a libs -ll # used by sh libs -lufs # used by mount |
