diff options
Diffstat (limited to 'release/doc/fr_FR.ISO8859-1/installation/sparc64')
3 files changed, 0 insertions, 605 deletions
diff --git a/release/doc/fr_FR.ISO8859-1/installation/sparc64/Makefile b/release/doc/fr_FR.ISO8859-1/installation/sparc64/Makefile deleted file mode 100644 index f8f6448..0000000 --- a/release/doc/fr_FR.ISO8859-1/installation/sparc64/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# The FreeBSD Documentation Project -# The FreeBSD French Documentation Project -# $Id$ -# -# $FreeBSD$ -# Original revision: 1.1 -# - - -RELN_ROOT?= ${.CURDIR}/../../.. - -DOC?= article -FORMATS?= html -INSTALL_COMPRESSED?= gz -INSTALL_ONLY_COMPRESSED?= - -# SGML content -SRCS+= article.xml -SRCS+= install.xml -SRCS+= ../common/artheader.xml -SRCS+= ../common/install.xml -SRCS+= ../common/layout.xml - -.include "${RELN_ROOT}/share/mk/doc.relnotes.mk" -.include "${DOC_PREFIX}/share/mk/doc.project.mk" diff --git a/release/doc/fr_FR.ISO8859-1/installation/sparc64/article.xml b/release/doc/fr_FR.ISO8859-1/installation/sparc64/article.xml deleted file mode 100644 index d016283..0000000 --- a/release/doc/fr_FR.ISO8859-1/installation/sparc64/article.xml +++ /dev/null @@ -1,25 +0,0 @@ -<?xml version="1.0" encoding="iso-8859-1"?> -<!DOCTYPE article PUBLIC "-//FreeBSD//DTD DocBook XML V5.0-Based Extension//EN" - "../../../share/xml/freebsd50.dtd" [ -<!ENTITY % release PUBLIC "-//FreeBSD//ENTITIES Release Specification//EN" "release.ent"> - %release; -<!ENTITY % sections SYSTEM "../common/install.ent"> %sections; - -<!-- Architecture-specific customization --> - -<!ENTITY arch "sparc64"> -<!ENTITY arch.print "UltraSPARC"> -<!ENTITY sect.sparc64.install SYSTEM "./install.xml"> -]> -<!-- - The FreeBSD Documentation Project - The FreeBSD French Documentation Project - - $Id$ - $FreeBSD$ - Original revision: 1.3 ---> -<article xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" version="5.0"> -&artheader; -§.sparc64.install; -</article> diff --git a/release/doc/fr_FR.ISO8859-1/installation/sparc64/install.xml b/release/doc/fr_FR.ISO8859-1/installation/sparc64/install.xml deleted file mode 100644 index b42e57f..0000000 --- a/release/doc/fr_FR.ISO8859-1/installation/sparc64/install.xml +++ /dev/null @@ -1,554 +0,0 @@ -<!-- - The FreeBSD Documentation Project - The FreeBSD French Documentation Project - - $Id$ - $FreeBSD$ - Original revision: 1.12 - Ce fichier contient les instructions pour l'installation - specifique aux systemes sparc64. - ---> -<sect1 xmlns="http://docbook.org/ns/docbook" xmlns:xlink="http://www.w3.org/1999/xlink" version="5.0"> - <title>***Non traduit***Installing &os;</title> - - <para>This text describes how to install and boot the &arch; port. - Users of this port are encouraged to subscribe to the - &a.sparc;.</para> - - <warning> - <para>The kernel and userland binaries mentioned below are highly - experimental (for example, the kernel contains some ATA changes - and EEPROM handling code which could potentially be dangerous). - Unless you know what you are doing and are willing to cope with - any damage that might arise, you should probably not be trying - this.</para> - </warning> - - <para>Unlike &os;/i386 or &os;/alpha, there is no version of - &man.sysinstall.8; for &os;/&arch;. The installation procedure - consists of loading a kernel (either from CDROM or the network) - onto the &arch; machine, with a root filesystem on CDROM or - exported via NFS. The utilities on the root filesystem can then - be used to partition the local disk on the &arch; machine and - optionally to copy the &os; distribution to the local disk to make - a stand-alone machine.</para> - - <para>Currently, there are two ways to install &os;/&arch; on a new - machine. By far the easier of the two is to install from CDROM; - this method allows you to install &os; without any dependencies on - any other computers.</para> - - <para>If installing from CDROM is impossible or undesirable, the - alternative is to install over the network. This requires another - machine, suitably configured, to serve the boot loader, kernel, - and root filesystem to the new machine, via a combination of - RARP, TFTP, and either BOOTP or DHCP. This netboot server can be - another &os; machine, but is not required to be.</para> - - <para>You will need to decide which of these methods you want to use - for installation, as this will determine the set of files you need - to download (if any), as well as the steps required to do the - installation.</para> - -<!-- this should read "in this document" after the re-structure --> - - <important> - <para>The URLs in this section are provisional and subject to - change. Please see the archives of the &a.sparc; for the most - recent locations of files. This notice will be removed when - more permanent URLs have been determined.</para> - </important> - - <sect2 xml:id="getting-to-prom-prompt"> - <title>Getting to the PROM Prompt</title> - - <para>Most &arch; systems are set up to boot automatically from - disk. To install &os;, you need to boot over the network or - from a CDROM, which requires you to break into the PROM - (OpenFirmware).</para> - - <para>To do this, reboot the system, and wait until the boot - message appears. It depends on the model, but should look about - like:</para> - - <screen>Sun Blade 100 (UltraSPARC-IIe), Keyboard Present -Copyright 1998-2001 Sun Microsystems, Inc. All rights reserved. -OpenBoot 4.2, 128 MB memory installed, Serial #51090132. -Ethernet address 0:3:ba:b:92:d4, Host ID: 830b92d4.</screen> - - <para>If your system proceeds to boot from disk at this point, you - need to press <keycombo action="simul"><keycap>L1</keycap><keycap>A</keycap></keycombo> - or <keycombo action="simul"><keycap>Stop</keycap><keycap>A</keycap></keycombo> - on the keyboard, or send a <command>BREAK</command> over the - serial console (using for example <command>~#</command> in - &man.tip.1; or &man.cu.1;) to get to the PROM prompt. It looks - like this:</para> - - <screenco> - <areaspec> - <area xml:id="prompt-single" coords="1 5"/> - <area xml:id="prompt-smp" coords="2 5"/> - </areaspec> - - <screen><prompt>ok </prompt> -<prompt>ok {0} </prompt></screen> - - <calloutlist> - <callout arearefs="prompt-single"> - <para>This is the prompt used on systems with just one - CPU.</para> - </callout> - - <callout arearefs="prompt-smp"> - <para>This is the prompt used on SMP systems, the digit - indicates the number of the active CPU.</para> - </callout> - </calloutlist> - </screenco> - </sect2> - - <sect2 xml:id="prepare-cd"> - <title>Preparing for a CDROM Installation</title> - - <para>If you want to do a CDROM installation, an ISO image with a - snapshot of &os;/&arch; can be found at <uri xlink:href="&release.url;">&release.url;</uri>. This file can be used to create a - bootable CDROM which contains everything necessary to boot and - load at least a minimal &os; installation.</para> - -<!-- XXX ISO location?--> - <para>Place the CDROM into your drive, and break into the PROM as - described above. On the PROM prompt, type <command>boot - cdrom</command>. The system should boot into single-user mode - now, and you can create the disk label and install the base - system archive as described in <xref linkend="creating-disk-label"/> and <xref linkend="creating-root-filesystem"/>.</para> - </sect2> - - <sect2 xml:id="prepare-network"> - <title>Preparing for a Network Installation</title> - - <para>A &os;/&arch; kernel is booted by having the firmware - retrieve and execute a <application>loader</application>, which - in turn fetches and executes the actual kernel. For this boot - process, you need to set up &man.rarpd.8; and &man.tftpd.8; (for - the firmware) and &man.bootpd.8; (for the - <application>loader</application>) on another networked system. - The loader can fetch a kernel using TFTP or NFS. All of this is - covered in detail below.</para> - - <sect3 xml:id="downloading"> - <title>Getting the Required Files</title> - - <para>For a network installation, you will need several files. - First, you will need to download a &os;/&arch; loader for - &man.tftpd.8; to serve to your &arch; client. The loader will - use either TFTP or NFS to retrieve the &os; kernel from the - netboot server. There is a separate loader for each of these - methods (i.e. a loader for TFTP and a loader for NFS). You - should download one of the following files, as - appropriate:</para> - - <itemizedlist> - <listitem> - <para><uri xlink:href="&release.url;loader-tftp.gz">&release.url;loader-tftp.gz</uri></para> - </listitem> - - <listitem> - <para><uri xlink:href="&release.url;loader-nfs.gz">&release.url;loader-nfs.gz</uri></para> - </listitem> - </itemizedlist> - - <para>A network installation also requires a kernel to be served - to the netboot client. A suitable kernel can be found at - <uri xlink:href="&release.url;">&release.url;</uri>.</para> -<!-- XXX kernel filename?--> - - <para>Finally, you will need a &man.tar.1; archive which - contains the binaries and configuration files from the base - system. This file is available from <uri xlink:href="&release.url;distrib.tar.gz">&release.url;distrib.tar.gz</uri>.</para> - </sect3> - -<!-- put the words "netboot server" in here --> - <sect3> - <title>rarpd</title> - - <para>You need to add the Ethernet address of your &os;/&arch; - system to <filename>/etc/ethers</filename> on the netboot - server. An entry looks like:</para> - - <programlisting>0:3:ba:b:92:d4 your.host.name</programlisting> - - <para>The Ethernet address is usually displayed in the boot - message.</para> - - <para>Make sure <systemitem>your.host.name</systemitem> is in - <filename>/etc/hosts</filename> or has a valid DNS entry (or - use an IP address). Then, start &man.rarpd.8; on a network - interface that is on the same subnet as the &os;/&arch; - system.</para> - </sect3> - -<!-- put the words "netboot server" in here --> - <sect3> - <title>tftpd</title> - - <para>Activate &man.tftpd.8; in your &man.inetd.8; - configuration by uncommenting the following line in - <filename>/etc/inetd.conf</filename>:</para> - - <programlisting>tftp dgram udp wait nobody /usr/libexec/tftpd tftpd /tftpboot</programlisting> - - <para>Copy the unpacked loader to your - <filename>/tftpboot</filename> directory, and name it with the - &os;/&arch; host's IP address in upper-case hexadecimal - notation without dots (or use appropriately-named symbolic - links). For example, your setup may look like this, for an IP - address of <systemitem>192.168.0.16</systemitem>:</para> - - <screen> lrwx------ 1 tmm users 9 Jul 24 17:05 /tftpboot/C0A80010 -> boot/loader - -rw-r--r-- 1 tmm users 1643021 Oct 20 18:04 /tftpboot/boot/loader</screen> - - <para>If you have trouble booting, it is very helpful to use - &man.tcpdump.1; to monitor the TFTP requests. This will allow - you to see the file name you need to use for the loader. - Error replies by the TFTP server are most often due to - incorrect file permissions.</para> - </sect3> - -<!-- put the words "netboot server" in here --> - <sect3> - <title>Setting up bootpd/dhcpd</title> - - <para>You can use either BOOTP or DHCP (both not both) to - provide some parameters to the boot loader, such as a - machine's IP address. If you are using another &os; machine - as a netboot server, the BOOTP functionality is provided by - &man.bootpd.8;, which is a part of the &os; base system. - Several DHCP servers are provided in the &os; Ports - Collection.</para> - - <para>If you are going to use &man.bootpd.8;, create entries for - your &os;/&arch; system in the server's - <filename>/etc/bootptab</filename> (see &man.bootptab.5; for - more details):</para> - - <programlisting>.default:\ - :bf="kernel":dn=local:ds=<replaceable>name-server-ip-address</replaceable>:\ - :gw=<replaceable>gateway-ip-address</replaceable>:ht=ether:hd="/tftpboot/boot/kernel":hn:\ - :sa="<replaceable>tftp-server-ip-address</replaceable>":\ - :rp="<replaceable>tftp-server-ip-address</replaceable>:<replaceable>nfs-root-directory</replaceable>":\ - :sm=<replaceable>ip-netmask</replaceable> - -<replaceable>name-of-the-entry</replaceable>:\ - ha=<replaceable>sparc64-ethernet-address</replaceable>:ip=<replaceable>sparc64-ip-address</replaceable>:tc=.default</programlisting> - - <para>The Ethernet address must be the same as the one in the - TFTP example above, but it is specified hexadecimal notation - without colons (for the example above, this would be - <literal>0003ba0b92d4</literal>). NFS/TFTP specific entries - can be omitted if the given method is not used. The strings - given in the <literal>hd</literal> and <literal>bf</literal> - properties are concatenated to give the boot file name. If - your kernel is named differently or you use another directory, - change these values as required. If you are booting using - NFS, remove the <literal>bf</literal> and - <literal>hd</literal> settings (or change them to specify the - directory and file inside the NFS root hierarchy in which the - kernel will reside). The name of the host entry is - conventionally the host name without the domain - appended.</para> - - <para>For a DHCP server, add an entry similar to the following - to your <filename>dhcpd.conf</filename> file. An example - entry for <application>ISC DHCP</application> version 2 - (available in the &os; Ports Collection as <package>net/isc-dhcp2</package>) is shown - below:</para> - - <programlisting>host <replaceable>name-of-entry</replaceable> { - hardware ethernet <replaceable>sparc64-ethernet-address</replaceable>; - option host-name "<replaceable>sparc64-fully-qualified-domain-name</replaceable>"; - fixed-address <replaceable>sparc64-ip-address</replaceable>; - always-reply-rfc1048 on; - filename "kernel"; - option root-path "<replaceable>tftp-server-ip-address</replaceable>:<replaceable>nfs-root-directory</replaceable>"; -}</programlisting> - - <para>The <literal>filename</literal> option corresponds to the - concatenation of <literal>hd</literal> and - <literal>bf</literal> in <filename>/etc/bootptab</filename>. - The Ethernet address is specified in hexadecimal with colons, - just like in the &man.rarpd.8; example above. - <literal>options root-path</literal> corresponds to - <literal>rp</literal> in <filename>/etc/bootptab</filename>. - If the name given in <literal>option host-name</literal> is - resolvable, i.e. has a DNS entry or is associated with an - address in <filename>/etc/hosts</filename>, the - <literal>fixed-address</literal> specification can be - omitted.</para> - </sect3> - - <sect3> - <title>Loading the Kernel</title> - - <para>With the daemons on the netboot server configured, the - next step is to copy the kernel (obtained during the steps of - <xref linkend="downloading"/>) to an appropriate directory. - There are two ways of retrieving a kernel over the network: - TFTP and NFS. (You specified one of these two alternatives by - picking a loader.)</para> - - <para>For both TFTP and NFS, the loader will use the parameters - that it obtained via BOOTP or DHCP to find the kernel.</para> - - <sect4> - <title>Loading the Kernel over TFTP</title> - - <para>Place the kernel in the directory you specified using - <literal>bf</literal> and <literal>hd</literal> in the - <filename>/etc/bootptab</filename> or the - <literal>filename</literal> parameter to - <filename>dhcpd.conf</filename>.</para> - </sect4> - - <sect4> - <title>Loading the Kernel over NFS</title> - - <para>Export the directory that was specified by the - <literal>rp</literal> property in - <filename>/etc/bootptab</filename> or the - <literal>root-path</literal> parameter in - <filename>dhcpd.conf</filename> (see &man.exports.5;). Copy - the kernel to the directory you specified using - <literal>bf</literal> and <literal>hd</literal> in the - <filename>/etc/bootptab</filename> or the - <literal>filename</literal> parameter to - <filename>dhcpd.conf</filename>.</para> - </sect4> - </sect3> - - <sect3> - <title>Loading the Base System to the Netboot Server</title> - - <para>You must extract the base system distribution image to the - NFS root directory specified either by the - <literal>rp</literal> option in - <filename>/etc/bootptab</filename> or the - <literal>root-path</literal> option in - <filename>dhcpd.conf</filename>. This directory tree will - become the &arch;'s root filesystem once the kernel is booted. - Besides providing a normal userland environment, it also - contains all of the necessary utilities for you to install the - distribution on the &arch; client's local disk.</para> - - <para>Using whatever editing tools you have on the netboot - server, you probably will want to edit the &arch;'s - <filename>/etc/fstab</filename> and - <filename>/etc/rc.conf</filename> and set a - <systemitem class="username">root</systemitem> password.</para> - </sect3> - - <sect3> - <title>Booting</title> - - <para>If all goes well, you can now boot the &os; on your &arch; - machine by dropping into the PROM prompt as described in <xref linkend="getting-to-prom-prompt"/>. Now, just type - <command>boot net</command> and the system should boot. - Specifically, the loader is retrieved via TFTP, it then does a - BOOTP request and will proceed to load the kernel (either - using TFTP or NFS, depending on your choice of loader). Then, - it should wait 10 seconds for user input and proceed to - execute the kernel.</para> - - <para>If something does not work in between, and you suspect - TFTP/NFS/BOOTP problems, <application>Ethereal</application> - (available in the &os; Ports Collection as <package> net/ethereal</package>) is usually helpful. - The most common problems are related to bad file permissions. - Also note that &man.rarpd.8; will not answer to packets under - some circumstances, refer to the manual page for - details.</para> - </sect3> - </sect2> - - <sect2 xml:id="creating-disk-label"> - <title>Creating a Disk Label</title> - - <para>The kernel supports the Sun disk label format, so you can - label the disks you want to use with &os; from Solaris.</para> - - <para>&os; disk labels must currently be created by hand, as - &man.sysinstall.8; is not yet available on &os;/&arch;. Please - refer to the <link xlink:href="http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/">FreeBSD - Handbook</link> for more information about labels and special - partitions.</para> - - <para>On &os;/&arch;, a Sun compatibility label is embedded in the - &os; label; this is needed for the PROM to boot from disk. This - imposes an additional restriction on the disk label format: - partitions are required to start on a cylinder boundary.</para> - - <para>To create a disk label, the following procedure is the - easiest:</para> - - <procedure> - <step> - <para>Run <command>disklabel -w -r - device auto</command> to create a - basic disk label. The third argument you need specify here - is just the name of the device, not the complete path to the - device node (e.g. <filename>ad0</filename> for the first - ATA disk).</para> - </step> - - <step> - <para> Use <command>disklabel -e - device</command> to open an - editor in which you can edit the disk label. The - information presented to you should look like:</para> - - <screen># /dev/ad6c: -type: unknown -disk: amnesiac -label: -flags: -bytes/sector: 512 -sectors/track: 63 -tracks/cylinder: 16 -sectors/cylinder: 1008 -cylinders: 79780 -sectors/unit: 80418240 -rpm: 3600 -interleave: 1 -trackskew: 0 -cylinderskew: 0 -headswitch: 0 # milliseconds -track-to-track seek: 0 # milliseconds -drivedata: 0 - -8 partitions: -# size offset fstype [fsize bsize bps/cpg] - c: 80418240 0 unused 0 0 # (Cyl. 0 - 79779)</screen> - - <para>You can now add new partitions in the same format as the - already present line. Using <literal>*</literal> in the - offset field makes the procedure easier; please refer to the - &man.disklabel.8; manual page for more information.</para> - - <para>To make sure the restriction mentioned above is met, the - size of each partition must be a multiple of the number of - sectors per cylinder as shown in the information that is - presented in the editor (1008 in the example above).</para> - - <para>When you are done, save your changes and quit the - editor.i This will cause the disk label to be - written.</para> - - <warning> - <para>This procedure will overwrite any disk label that may - be already present on the disk. Any existing filesystems - on this disk must have their respective partition entries - in the old and new label match - <emphasis>exactly</emphasis>, or they will be - lost.</para> - </warning> - - <para>If you want to double-check that your partitions end on - cylinder boundaries, run <command>disklabel -e - device</command> again. The - editor will display the cylinders used by a particular - partition on the right hand side of the output. If any of - the partitions you defined (i.e. anything except partition - <literal>c</literal>) shows an <literal>*</literal> next to - it, the partition does <emphasis>NOT</emphasis> start or end - on a cylinder boundary. You <emphasis>MUST</emphasis> fix - these or your system will not work.</para> - </step> - - <step> - <para>Use <command>disklabel -B</command> if you want to make - the disk bootable for &os;/&arch;.</para> - - <warning> - <para>Using <command>disklabel -B</command> on a disk will - overwrite any preexisting boot block, so it will likely - render any other operating system installed on the same - disk unbootable.</para> - </warning> - - <para>If you do not want to overwrite the boot block, it is - possible to load the <application>loader</application> via - TFTP as described above, but have it boot the kernel from - disk. This requires a special loader binary, which is - available at <uri xlink:href="ftp://ftp.FreeBSD.org/pub/FreeBSD/development/sparc64/loader-ufs.gz">ftp://ftp.FreeBSD.org/pub/FreeBSD/development/sparc64/loader-ufs.gz</uri></para> - </step> - </procedure> - </sect2> - - <sect2 xml:id="creating-root-filesystem"> - <title>Creating the Root Fileystem</title> - - <para>If you want to boot from a local disk, you will need to - create a root filesystem to hold the base system binaries and - configuration files (and optionally other filesystems mounted - in places such as <filename>/usr</filename> and - <filename>/var</filename>).</para> - - <para>The kernel contains support for Sun disklabels, so you can - use Solaris disks, which may even be prepared using - <application>newfs</application> under Solaris. NetBSD disk - labels and filesystems are also usable from &os;.</para> - - <warning> - <para>Do <emphasis>not</emphasis> run Solaris - <application>fsck</application> on filesystems modified by - &os;. Doing so will damage the file permissions.</para> - </warning> - - <para>To create filesystems and to install the base system, boot - from CDROM or via NFS and create a disk label as described in - <xref linkend="creating-disk-label"/>.</para> - - <para>When booting the first time and you have not entered your - root partition into <filename>/etc/fstab</filename> yet, you may - need to specify your root partition on the mountroot prompt when - booting (use a format like - <command>ufs:diskpartition</command>, - i.e. leave the slice specification out). If the kernel does - automatically attempt to boot from another filesystem, press a - key other than <keycap>Enter</keycap> on the - <application>loader</application> prompt:</para> - - <screen>Hit [Enter] to boot immediately, or any other key for command prompt.</screen> - - <para>Then, boot the kernel using <command>boot -a -s</command>, - which will cause the kernel to ask you for the root partition - and then boot into single-user mode. Once the root filesystem - has been entered into <filename>/etc/fstab</filename>, it should - be automatically mounted as <filename>/</filename> on the next - boot.</para> - - <para>If you are booting over the network (via NFS), the above - BOOTP entries should suffice to have the kernel find and mount - the root filesystem via NFS.</para> - </sect2> - - <sect2 xml:id="installing-base-system"> - <title>Installing the Base System</title> - - <para>If you booted the kernel from the network, you downloaded a - &man.tar.1; archive with the base system and exported it from - the netboot server via NFS. You can unpack this same archive to - your local disk to create a stand-alone system (remember to copy - the kernel over as well).</para> - - <para>If you booted from CDROM, the same archive is available in - <filename>/root/</filename> on the CDROM.</para> - - <para>Before booting the system stand-alone, you will want to edit - <filename>/etc/fstab</filename> and - <filename>/etc/rc.conf</filename> and set a - <systemitem class="username">root</systemitem> password.</para> - - <para>Note that some programs from the base system may not be - present in the archive, or may not work properly yet.</para> - </sect2> -</sect1> |