diff options
Diffstat (limited to 'release/doc/en_US.ISO8859-1/installation/common/install.sgml')
-rw-r--r-- | release/doc/en_US.ISO8859-1/installation/common/install.sgml | 39 |
1 files changed, 18 insertions, 21 deletions
diff --git a/release/doc/en_US.ISO8859-1/installation/common/install.sgml b/release/doc/en_US.ISO8859-1/installation/common/install.sgml index 6feda2d..bc0fa34 100644 --- a/release/doc/en_US.ISO8859-1/installation/common/install.sgml +++ b/release/doc/en_US.ISO8859-1/installation/common/install.sgml @@ -122,10 +122,9 @@ from {alpha,i386}/INSTALL.TXT. installation CDROM, you can boot FreeBSD directly from the CDROM. Insert the CDROM into the drive and type the following command to start the installation (substituting the name of the - appropriate CDROM drive if necessary): + appropriate CDROM drive if necessary):</para> - <screen>>>><userinput>boot dka0</userinput></screen> - </para> + <screen arch="alpha">>>><userinput>boot dka0</userinput></screen> <para arch="alpha">Alternatively you can boot the installation from floppy disk. You should start the installation by building @@ -135,10 +134,9 @@ from {alpha,i386}/INSTALL.TXT. found in <xref linkend="floppies">. From the SRM console prompt (<literal>>>></literal>), just insert the <filename>kern.flp</filename> floppy and type the following - command to start the installation: + command to start the installation:</para> - <screen>>>><userinput>boot dva0</userinput></screen> - </para> + <screen arch="alpha">>>><userinput>boot dva0</userinput></screen> <para arch="alpha">Insert the <filename>mfsroot.flp</filename> floppy when prompted and you will end up at the first screen of @@ -183,15 +181,15 @@ from {alpha,i386}/INSTALL.TXT. <para arch="alpha">Once the install procedure has finished, you will be able to start &os;/&arch; by typing something like this to the SRM - prompt: - <screen>>>><userinput>boot dkc0</userinput></screen> - </para> + prompt:</para> + + <screen arch="alpha">>>><userinput>boot dkc0</userinput></screen> <para arch="alpha">This instructs the firmware to boot the specified disk. To find the SRM names of disks in your machine, use the <literal>show - device</literal> command: + device</literal> command:</para> - <screen>>>><userinput>show device</userinput> + <screen arch="alpha">>>><userinput>show device</userinput> dka0.0.0.4.0 DKA0 TOSHIBA CD-ROM XM-57 3476 dkc0.0.0.1009.0 DKC0 RZ1BB-BS 0658 dkc100.1.0.1009.0 DKC100 SEAGATE ST34501W 0015 @@ -200,7 +198,6 @@ ewa0.0.0.3.0 EWA0 00-00-F8-75-6D-01 pkc0.7.0.1009.0 PKC0 SCSI Bus ID 7 5.27 pqa0.0.0.4.0 PQA0 PCI EIDE pqb0.0.1.4.0 PQB0 PCI EIDE</screen> - </para> <para arch="alpha">This example is from a Digital Personal Workstation 433au and shows three disks attached to the machine. The first is a @@ -210,16 +207,15 @@ pqb0.0.1.4.0 PQB0 PCI EIDE</screen> <para arch="alpha">You can specify which kernel file to load and what boot options to use with the <option>-file</option> and - <option>-flags</option> options, for example: - <screen><prompt>>>></prompt> <userinput>boot -file kernel.old -flags s</userinput></screen> - </para> + <option>-flags</option> options, for example:</para> - <para arch="alpha">To make &os;/&arch; boot automatically, use these commands: + <screen arch="alpha"><prompt>>>></prompt> <userinput>boot -file kernel.old -flags s</userinput></screen> - <screen><prompt>>>></prompt> <userinput>set boot_osflags a</userinput> + <para arch="alpha">To make &os;/&arch; boot automatically, use these commands:</para> + + <screen arch="alpha"><prompt>>>></prompt> <userinput>set boot_osflags a</userinput> <prompt>>>></prompt> <userinput>set bootdef_dev dkc0</userinput> <prompt>>>></prompt> <userinput>set auto_action BOOT</userinput></screen> - </para> <sect3> <title>Installing from a Network CDROM</title> @@ -313,11 +309,12 @@ pqb0.0.1.4.0 PQB0 PCI EIDE</screen> machine, a format is still not a bad idea though you don't need to put a DOS filesystem on each floppy. You can use the &man.disklabel.8; and &man.newfs.8; commands to put a UFS filesystem on a - floppy, as the following sequence of commands illustrates: - <screen>&prompt.root; <userinput>fdformat -f 1440 fd0.1440</userinput> + floppy, as the following sequence of commands + illustrates:</para> + + <screen>&prompt.root; <userinput>fdformat -f 1440 fd0.1440</userinput> &prompt.root; <userinput>disklabel -w -r fd0.1440 floppy3</userinput> &prompt.root; <userinput>newfs -t 2 -u 18 -l 1 -i 65536 /dev/fd0</userinput></screen> - </para> <para>After you've formatted the floppies for DOS or UFS, you'll need to copy the files onto them. The distribution files are |