diff options
Diffstat (limited to 'lib/libusb/libusb20.3')
| -rw-r--r-- | lib/libusb/libusb20.3 | 940 |
1 files changed, 940 insertions, 0 deletions
diff --git a/lib/libusb/libusb20.3 b/lib/libusb/libusb20.3 new file mode 100644 index 0000000..403ddba --- /dev/null +++ b/lib/libusb/libusb20.3 @@ -0,0 +1,940 @@ +.\" +.\" Copyright (c) 2008 Hans Petter Selasky +.\" +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.Dd June 22, 2009 +.Dt LIBUSB20 3 +.Os +.Sh NAME +.Nm libusb20 +. +.Nd "USB access library" +. +. +.Sh LIBRARY +. +. +USB access library (libusb -lusb) +. +. +. +.Sh SYNOPSIS +.In libusb20.h +.Ft int +.Fn libusb20_tr_close "struct libusb20_transfer *xfer" +.Ft int +.Fn libusb20_tr_open "struct libusb20_transfer *xfer" "uint32_t max_buf_size" "uint32_t max_frame_count" "uint8_t ep_no" +.Ft struct libusb20_transfer* +.Fn libusb20_tr_get_pointer "struct libusb20_device *pdev" "uint16_t tr_index" +.Ft uint16_t +.Fn libusb20_tr_get_time_complete "struct libusb20_transfer *xfer" +.Ft uint32_t +.Fn libusb20_tr_get_actual_frames "struct libusb20_transfer *xfer" +.Ft uint32_t +.Fn libusb20_tr_get_actual_length "struct libusb20_transfer *xfer" +.Ft uint32_t +.Fn libusb20_tr_get_max_frames "struct libusb20_transfer *xfer" +.Ft uint32_t +.Fn libusb20_tr_get_max_packet_length "struct libusb20_transfer *xfer" +.Ft uint32_t +.Fn libusb20_tr_get_max_total_length "struct libusb20_transfer *xfer" +.Ft uint8_t +.Fn libusb20_tr_get_status "struct libusb20_transfer *xfer" +.Ft uint8_t +.Fn libusb20_tr_pending "struct libusb20_transfer *xfer" +.Ft void +.Fn libusb20_tr_callback_wrapper "struct libusb20_transfer *xfer" +.Ft void +.Fn libusb20_tr_clear_stall_sync "struct libusb20_transfer *xfer" +.Ft void +.Fn libusb20_tr_drain "struct libusb20_transfer *xfer" +.Ft void +.Fn libusb20_tr_set_buffer "struct libusb20_transfer *xfer" "void *buffer" "uint16_t fr_index" +.Ft void +.Fn libusb20_tr_set_callback "struct libusb20_transfer *xfer" "libusb20_tr_callback_t *cb" +.Ft void +.Fn libusb20_tr_set_flags "struct libusb20_transfer *xfer" "uint8_t flags" +.Ft uint32_t +.Fn libusb20_tr_get_length "struct libusb20_transfer *xfer" "uint16_t fr_index" +.Ft void +.Fn libusb20_tr_set_length "struct libusb20_transfer *xfer" "uint32_t length" "uint16_t fr_index" +.Ft void +.Fn libusb20_tr_set_priv_sc0 "struct libusb20_transfer *xfer" "void *sc0" +.Ft void +.Fn libusb20_tr_set_priv_sc1 "struct libusb20_transfer *xfer" "void *sc1" +.Ft void +.Fn libusb20_tr_set_timeout "struct libusb20_transfer *xfer" "uint32_t timeout" +.Ft void +.Fn libusb20_tr_set_total_frames "struct libusb20_transfer *xfer" "uint32_t nframes" +.Ft void +.Fn libusb20_tr_setup_bulk "struct libusb20_transfer *xfer" "void *pbuf" "uint32_t length" "uint32_t timeout" +.Ft void +.Fn libusb20_tr_setup_control "struct libusb20_transfer *xfer" "void *psetup" "void *pbuf" "uint32_t timeout" +.Ft void +.Fn libusb20_tr_setup_intr "struct libusb20_transfer *xfer" "void *pbuf" "uint32_t length" "uint32_t timeout" +.Ft void +.Fn libusb20_tr_setup_isoc "struct libusb20_transfer *xfer" "void *pbuf" "uint32_t length" "uint61_t fr_index" +.Ft void +.Fn libusb20_tr_start "struct libusb20_transfer *xfer" +.Ft void +.Fn libusb20_tr_stop "struct libusb20_transfer *xfer" +.Ft void +.Fn libusb20_tr_submit "struct libusb20_transfer *xfer" +.Ft void * +.Fn libusb20_tr_get_priv_sc0 "struct libusb20_transfer *xfer" +.Ft void * +.Fn libusb20_tr_get_priv_sc1 "struct libusb20_transfer *xfer" +.Ft const char * +.Fn libusb20_dev_get_backend_name "struct libusb20_device *" +.Ft int +.Fn libusb20_dev_get_info "struct libusb20_device *pdev" "struct usb_device_info *pinfo" +.Ft int +.Fn libusb20_dev_get_iface_desc "struct libusb20_device *pdev" "uint8_t iface_index" "char *buf" "uint8_t len" +.Ft const char * +.Fn libusb20_dev_get_desc "struct libusb20_device *pdev" +.Ft int +.Fn libusb20_dev_close "struct libusb20_device *pdev" +.Ft int +.Fn libusb20_dev_detach_kernel_driver "struct libusb20_device *pdev" "uint8_t iface_index" +.Ft int +.Fn libusb20_dev_set_config_index "struct libusb20_device *pdev" "uint8_t configIndex" +.Ft int +.Fn libusb20_dev_get_debug "struct libusb20_device *pdev" +.Ft int +.Fn libusb20_dev_get_fd "struct libusb20_device *pdev" +.Ft int +.Fn libusb20_dev_kernel_driver_active "struct libusb20_device *pdev" "uint8_t iface_index" +.Ft int +.Fn libusb20_dev_open "struct libusb20_device *pdev" "uint16_t transfer_max" +.Ft int +.Fn libusb20_dev_process "struct libusb20_device *pdev" +.Ft int +.Fn libusb20_dev_request_sync "struct libusb20_device *pdev" "struct LIBUSB20_CONTROL_SETUP_DECODED *setup" "void *data" "uint16_t *pactlen" "uint32_t timeout" "uint8_t flags" +.Ft int +.Fn libusb20_dev_req_string_sync "struct libusb20_device *pdev" "uint8_t index" "uint16_t langid" "void *ptr" "uint16_t len" +.Ft int +.Fn libusb20_dev_req_string_simple_sync "struct libusb20_device *pdev" "uint8_t index" "void *ptr" "uint16_t len" +.Ft int +.Fn libusb20_dev_reset "struct libusb20_device *pdev" +.Ft int +.Fn libusb20_dev_set_power_mode "struct libusb20_device *pdev" "uint8_t power_mode" +.Ft uint8_t +.Fn libusb20_dev_get_power_mode "struct libusb20_device *pdev" +.Ft int +.Fn libusb20_dev_set_alt_index "struct libusb20_device *pdev" "uint8_t iface_index" "uint8_t alt_index" +.Ft struct LIBUSB20_DEVICE_DESC_DECODED * +.Fn libusb20_dev_get_device_desc "struct libusb20_device *pdev" +.Ft struct libusb20_config * +.Fn libusb20_dev_alloc_config "struct libusb20_device *pdev" "uint8_t config_index" +.Ft struct libusb20_device * +.Fn libusb20_dev_alloc "void" +.Ft uint8_t +.Fn libusb20_dev_get_address "struct libusb20_device *pdev" +.Ft uint8_t +.Fn libusb20_dev_get_bus_number "struct libusb20_device *pdev" +.Ft uint8_t +.Fn libusb20_dev_get_mode "struct libusb20_device *pdev" +.Ft uint8_t +.Fn libusb20_dev_get_speed "struct libusb20_device *pdev" +.Ft uint8_t +.Fn libusb20_dev_get_config_index "struct libusb20_device *pdev" +.Ft void +.Fn libusb20_dev_free "struct libusb20_device *pdev" +.Ft void +.Fn libusb20_dev_set_debug "struct libusb20_device *pdev" "int debug" +.Ft void +.Fn libusb20_dev_wait_process "struct libusb20_device *pdev" "int timeout" +.Ft int +.Fn libusb20_be_get_template "struct libusb20_backend *pbe" "int *ptemp" +.Ft int +.Fn libusb20_be_set_template "struct libusb20_backend *pbe" "int temp" +.Ft int +.Fn libusb20_be_get_dev_quirk "struct libusb20_backend *pber", "uint16_t index" "struct libusb20_quirk *pq" +.Ft int +.Fn libusb20_be_get_quirk_name "struct libusb20_backend *pbe" "uint16_t index" "struct libusb20_quirk *pq" +.Ft int +.Fn libusb20_be_add_dev_quirk "struct libusb20_backend *pbe" "struct libusb20_quirk *pq" +.Ft int +.Fn libusb20_be_remove_dev_quirk "struct libusb20_backend *pbe" "struct libusb20_quirk *pq" +.Ft struct libusb20_backend * +.Fn libusb20_be_alloc_default "void" +.Ft struct libusb20_backend * +.Fn libusb20_be_alloc_freebsd "void" +.Ft struct libusb20_backend * +.Fn libusb20_be_alloc_linux "void" +.Ft struct libusb20_device * +.Fn libusb20_be_device_foreach "struct libusb20_backend *pbe" "struct libusb20_device *pdev" +.Ft void +.Fn libusb20_be_dequeue_device "struct libusb20_backend *pbe" "struct libusb20_device *pdev" +.Ft void +.Fn libusb20_be_enqueue_device "struct libusb20_backend *pbe" "struct libusb20_device *pdev" +.Ft void +.Fn libusb20_be_free "struct libusb20_backend *pbe" +.Ft uint8_t +.Fn libusb20_me_get_1 "const struct libusb20_me_struct *me" "uint16_t off" +.Ft uint16_t +.Fn libusb20_me_get_2 "const struct libusb20_me_struct *me" "uint16_t off" +.Ft uint16_t +.Fn libusb20_me_encode "void *pdata" "uint16_t len" "const void *pdecoded" +.Ft uint16_t +.Fn libusb20_me_decode "const void *pdata" "uint16_t len" "void *pdecoded" +.Ft "const uint8_t *" +.Fn libusb20_desc_foreach "const struct libusb20_me_struct *me" "const uint8_t *pdesc" +. +. +.Sh DESCRIPTION +. +The +.Nm +library implements functions to be able to easily access and control +USB through the USB file system interface. +The +.Nm +interfaces are specific to the +.Fx +usb stack and are not available on other operating systems, portable +applications should consider using +.Xr libusb 3 . +. +. +.Sh USB TRANSFER OPERATIONS +. +.Pp +. +.Fn libusb20_tr_close +will release all kernel resources associated with an USB +.Fa xfer . +. +This function returns zero upon success. +. +Non-zero return values indicate a LIBUSB20_ERROR value. +. +.Pp +. +.Fn libusb20_tr_open +will allocate kernel buffer resources according to +.Fa max_buf_size +and +.Fa max_frame_count +associated with an USB +.Fa pxfer +and bind the transfer to the specified +.Fa ep_no . +.Fa max_buf_size +is the minimum buffer size which the data transport layer has to support. +If +.Fa max_buf_size +is zero, the +.Nm +library will use wMaxPacketSize to compute the buffer size. +This can be useful for isochronous transfers. +The actual buffer size can be greater than +.Fa max_buf_size +and is returned by +.Fn libusb20_tr_get_max_total_length . +. +This function returns zero upon success. +. +Non-zero return values indicate a LIBUSB20_ERROR value. +. +.Pp +. +.Fn libusb20_tr_get_pointer +will return a pointer to the allocated USB transfer according to the +.Fa pdev +and +.Fa tr_index +arguments. +. +This function returns NULL in case of failure. +. +.Pp +. +.Fn libusb20_tr_get_time_complete +will return the completion time of an USB transfer in +millisecond units. This function is most useful for isochronous USB +transfers when doing echo cancelling. +. +.Pp +. +.Fn libusb20_tr_get_actual_frames +will return the actual number of USB frames after an USB +transfer completed. A value of zero means that no data was transferred. +. +.Pp +. +.Fn libusb20_tr_get_actual_length +will return the sum of the actual length for all +transferred USB frames for the given USB transfer. +. +.Pp +. +.Fn libusb20_tr_get_max_frames +will return the maximum number of USB frames that were +allocated when an USB transfer was setup for the given USB transfer. +. +.Pp +. +.Fn libusb20_tr_get_max_packet_length +will return the maximum packet length in bytes +associated with the given USB transfer. +. +The packet length can be used round up buffer sizes so that short USB +packets are avoided for proxy buffers. +. +. +.Pp +. +.Fn libusb20_tr_get_max_total_length +function will return the maximum value for the length sum of all +USB frames associated with an USB transfer. +. +.Pp +. +.Fn libusb20_tr_get_status +will return the status of an USB transfer. +. +Status values are defined by a set of LIBUSB20_TRANSFER_XXX enums. +. +.Pp +. +.Fn libusb20_tr_pending +will return non-zero if the given USB transfer is +pending for completion. +. +Else this function returns zero. +. +.Pp +. +.Fn libusb20_tr_callback_wrapper +This is an internal function used to wrap asynchronous USB callbacks. +. +.Pp +. +.Fn libusb20_tr_clear_stall_sync +This is an internal function used to synchronously clear the stall on +the given USB transfer. +. +Please see the USB specification for more information on stall +clearing. +. +If the given USB transfer is pending when this function is called, the +USB transfer will complete with an error after that this function has +been called. +. +.Pp +. +.Fn libusb20_tr_drain +will stop the given USB transfer and will not return +until the USB transfer has been stopped in hardware. +. +.Pp +. +.Fn libusb20_tr_set_buffer +is used to set the +.Fa buffer +pointer for the given USB transfer and +.Fa fr_index . +. +Typically the frame index is zero. +. +. +.Pp +. +.Fn libusb20_tr_set_callback +is used to set the USB callback for asynchronous USB +transfers. +. +The callback type is defined by libusb20_tr_callback_t. +. +.Pp +. +.Fn libusb20_tr_set_flags +is used to set various USB flags for the given USB transfer. +.Bl -tag +.It LIBUSB20_TRANSFER_SINGLE_SHORT_NOT_OK +Report a short frame as error. +.It LIBUSB20_TRANSFER_MULTI_SHORT_NOT_OK +Multiple short frames are not allowed. +.It LIBUSB20_TRANSFER_FORCE_SHORT +All transmitted frames are short terminated. +.It LIBUSB20_TRANSFER_DO_CLEAR_STALL +Will do a clear-stall before starting the transfer. +.El +. +.Pp +. +.Fn libusb20_tr_get_length +returns the length of the given USB frame by index. +After an USB transfer is complete the USB frame length will get updated to the actual transferred length. +. +.Pp +. +.Fn libusb20_tr_set_length +sets the length of the given USB frame by index. +. +.Pp +. +.Fn libusb20_tr_set_priv_sc0 +sets private driver pointer number zero. +. +.Pp +. +.Fn libusb20_tr_set_priv_sc1 +sets private driver pointer number one. +. +.Pp +. +.Fn libusb20_tr_set_timeout +sets the timeout for the given USB transfer. +. +A timeout value of zero means no timeout. +. +The timeout is given in milliseconds. +. +.Pp +. +.Fn libusb20_tr_set_total_frames +sets the total number of frames that should be executed when the USB transfer is submitted. +. +The total number of USB frames must be less than the maximum number of USB frames associated with the given USB transfer. +. +.Pp +. +.Fn libusb20_tr_setup_bulk +is a helper function for setting up a single frame USB BULK transfer. +. +.Pp +. +.Fn libusb20_tr_setup_control +is a helper function for setting up a single or dual +frame USB CONTROL transfer depending on the control transfer length. +. +.Pp +. +.Fn libusb20_tr_setup_intr +is a helper function for setting up a single frame USB INTERRUPT transfer. +. +.Pp +. +.Fn libusb20_tr_setup_isoc +is a helper function for setting up a multi frame USB ISOCHRONOUS transfer. +. +.Pp +. +.Fn libusb20_tr_start +will get the USB transfer started, if not already +started. +. +This function will not get the transfer queued in hardware. +. +This function is non-blocking. +. +.Pp +. +.Fn libusb20_tr_stop +will get the USB transfer stopped, if not already stopped. +. +This function is non-blocking, which means that the actual stop can +happen after the return of this function. +. +.Pp +. +.Fn libusb20_tr_submit +will get the USB transfer queued in hardware. +. +. +.Pp +. +.Fn libusb20_tr_get_priv_sc0 +returns private driver pointer number zero associated +with an USB transfer. +. +. +.Pp +. +.Fn libusb20_tr_get_priv_sc1 +returns private driver pointer number one associated +with an USB transfer. +. +. +.Sh USB DEVICE OPERATIONS +. +.Pp +. +.Fn libusb20_dev_get_backend_name +returns a zero terminated string describing the backend used. +. +.Pp +. +.Fn libusb20_dev_get_info +retrives the BSD specific usb_device_info structure into the memory location given by +.Fa pinfo . +The USB device given by +.Fa pdev +must be opened before this function will succeed. +This function returns zero on success else a LIBUSB20_ERROR value is returned. +. +.Pp +. +.Fn libusb20_dev_get_iface_desc +retrieves the kernel interface description for the given USB +.Fa iface_index . +The format of the USB interface description is: "drivername<unit>: <description>" +The description string is always zero terminated. +A zero length string is written in case no driver is attached to the given interface. +The USB device given by +.Fa pdev +must be opened before this function will succeed. +This function returns zero on success else a LIBUSB20_ERROR value is returned. +. +.Pp +. +.Fn libusb20_dev_get_desc +returns a zero terminated string describing the given USB device. +The format of the string is: "drivername<unit>: <description>" +. +.Pp +. +.Fn libusb20_dev_close +will close the given USB device. +. +This function returns zero on success else a LIBUSB20_ERROR value is +returned. +. +.Pp +. +.Fn libusb20_dev_detach_kernel_driver +will try to detach the kernel driver for the USB interface given by +.Fa iface_index . +. +This function returns zero on success else a LIBUSB20_ERROR value is +returned. +. +.Pp +. +.Fn libusb20_dev_set_config_index +will try to set the configuration index on an USB +device. +. +The first configuration index is zero. +. +The un-configure index is 255. +. +This function returns zero on success else a LIBUSB20_ERROR value is returned. +. +.Pp +. +.Fn libusb20_dev_get_debug +returns the debug level of an USB device. +. +.Pp +. +.Fn libusb20_dev_get_fd +returns the file descriptor of the given USB device. +. +A negative value is returned when no file descriptor is present. +. +The file descriptor can be used for polling purposes. +. +.Pp +. +.Fn libusb20_dev_kernel_driver_active +returns a non-zero value if a kernel driver is active on +the given USB interface. +. +Else zero is returned. +. +.Pp +. +.Fn libusb20_dev_open +opens an USB device so that setting up USB transfers +becomes possible. +. +The number of USB transfers can be zero which means only control +transfers are allowed. +. +This function returns zero on success else a LIBUSB20_ERROR value is +returned. +. +A return value of LIBUSB20_ERROR_BUSY means that the device is already +opened. +. +.Pp +. +.Fn libusb20_dev_process +is called to sync kernel USB transfers with userland USB +transfers. +. +This function returns zero on success else a LIBUSB20_ERROR value is +returned typically indicating that the given USB device has been +detached. +. +.Pp +. +.Fn libusb20_dev_request_sync +will perform a synchronous control request on the given +USB device. +. +Before this call will succeed the USB device must be opened. +. +.Fa setup +is a pointer to a decoded and host endian SETUP packet. +.Fa data +is a pointer to a data transfer buffer associated with the control transaction. This argument can be NULL. +.Fa pactlen +is a pointer to a variable that will hold the actual transfer length after the control transaction is complete. +.Fa timeout +is the transaction timeout given in milliseconds. +A timeout of zero means no timeout. +.Fa flags +is used to specify transaction flags, for example LIBUSB20_TRANSFER_SINGLE_SHORT_NOT_OK. +. +This function returns zero on success else a LIBUSB20_ERROR value is +returned. +. +.Pp +. +.Fn libusb20_dev_req_string_sync +will synchronously request an USB string by language ID +and string index into the given buffer limited by a maximum length. +. +This function returns zero on success else a LIBUSB20_ERROR value is +returned. +. +.Pp +. +.Fn libusb20_dev_req_string_simple_sync +will synchronously request an USB string using the +default language ID and convert the string into ASCII before storing +the string into the given buffer limited by a maximum length which +includes the terminating zero. +. +This function returns zero on success else a LIBUSB20_ERROR value is +returned. +. +. +.Pp +. +.Fn libusb20_dev_reset +will try to BUS reset the given USB device and restore +the last set USB configuration. +. +This function returns zero on success else a LIBUSB20_ERROR value is +returned. +. +.Pp +. +.Fn libusb20_dev_set_power_mode +sets the power mode of the USB device. +. +Valid power modes: +.Bl -tag +.It LIBUSB20_POWER_OFF +.It LIBUSB20_POWER_ON +.It LIBUSB20_POWER_SAVE +.It LIBUSB20_POWER_SUSPEND +.It LIBUSB20_POWER_RESUME +.El +. +This function returns zero on success else a LIBUSB20_ERROR value is +returned. +. +.Pp +. +.Fn libusb20_dev_get_power_mode +returns the currently selected power mode for the given +USB device. +. +.Pp +. +.Fn libusb20_dev_set_alt_index +will try to set the given alternate index for the given +USB interface index. +. +This function returns zero on success else a LIBUSB20_ERROR value is +returned. +. +.Pp +. +.Fn libusb20_dev_get_device_desc +returns a pointer to the decoded and host endian version +of the device descriptor. +. +The USB device need not be opened when calling this function. +. +.Pp +. +.Fn libusb20_dev_alloc_config +will read out and decode the USB config descriptor for +the given USB device and config index. This function returns a pointer +to the decoded configuration which must eventually be passed to +free(). NULL is returned in case of failure. +. +.Pp +. +.Fn libusb20_dev_alloc +is an internal function to allocate a new USB device. +. +.Pp +. +.Fn libusb20_dev_get_address +returns the internal and not necessarily the real +hardware address of the given USB device. +. +.Pp +. +.Fn libusb20_dev_get_bus_number +returns the internal bus number which the given USB +device belongs to. +. +.Pp +. +.Fn libusb20_dev_get_mode +returns the current operation mode of the USB entity. +. +Valid return values are: +.Bl -tag +.It LIBUSB20_MODE_HOST +.It LIBUSB20_MODE_DEVICE +.El +. +.Pp +. +.Fn libusb20_dev_get_speed +returns the current speed of the given USB device. +. +.Bl -tag +.It LIBUSB20_SPEED_UNKNOWN +.It LIBUSB20_SPEED_LOW +.It LIBUSB20_SPEED_FULL +.It LIBUSB20_SPEED_HIGH +.It LIBUSB20_SPEED_VARIABLE +.It LIBUSB20_SPEED_SUPER +.El +. +.Pp +. +.Fn libusb20_dev_get_config_index +This function returns the currently select config index for the given +USB device. +. +.Pp +. +.Fn libusb20_dev_free +will free the given USB device and all associated USB +transfers. +. +.Pp +. +.Fn libusb20_dev_set_debug +will set the debug level for the given USB device. +. +.Pp +. +.Fn libusb20_dev_wait_process +function will wait until a pending USB transfer has completed on +the given USB device. +. +A timeout value can be specified which is passed on to the +.Xr poll 2 +function. +. +.Sh USB BACKEND OPERATIONS +. +.Fn libusb20_be_get_template +will return the currently selected global USB device +side mode template into the integer pointer +.Fa ptemp . +This function returns zero on success else a LIBUSB20_ERROR value is +returned. +. +.Pp +. +.Fn libusb20_be_set_template +will set the global USB device side mode template to +.Fa temp . +The new template is not activated until after the next USB +enumeration. +The template number decides how the USB device will present itself to +the USB Host, like Mass Storage Device, USB Ethernet Device. Also see +the +.Xr usb2_template 4 +module. +This function returns zero on success else a LIBUSB20_ERROR value is +returned. +. +.Pp +. +.Fn libusb20_be_get_dev_quirk +This function will return the device quirk according to +.Fa index +into the libusb20_quirk structure pointed to by +.Fa pq . +This function returns zero on success else a LIBUSB20_ERROR value is +returned. +. +If the given quirk does not exist LIBUSB20_ERROR_NOT_FOUND is +returned. +. +.Pp +. +.Fn libusb20_be_get_quirk_name +will return the quirk name according to +.Fa index +into the libusb20_quirk structure pointed to by +.Fa pq . +This function returns zero on success else a LIBUSB20_ERROR value is +returned. +. +If the given quirk does not exist LIBUSB20_ERROR_NOT_FOUND is +returned. +. +.Pp +. +.Fn libusb20_be_add_dev_quirk +will add the libusb20_quirk structure pointed to by the +.Fa pq +argument into the device quirk list. +. +This function returns zero on success else a LIBUSB20_ERROR value is +returned. +. +If the given quirk cannot be added LIBUSB20_ERROR_NO_MEM is +returned. +. +.Pp +. +.Fn libusb20_be_remove_dev_quirk +will remove the quirk matching the libusb20_quirk structure pointed to by the +.Fa pq +argument from the device quirk list. +. +This function returns zero on success else a LIBUSB20_ERROR value is +returned. +. +If the given quirk does not exist LIBUSB20_ERROR_NOT_FOUND is +returned. +. +.Pp +. +.Fn libusb20_be_alloc_default +.Fn libusb20_be_alloc_freebsd +.Fn libusb20_be_alloc_linux +These functions are used to allocate a specific USB backend or the +operating system default USB backend. Allocating a backend is a way to +scan for currently present USB devices. +. +.Pp +. +.Fn libusb20_be_device_foreach +is used to iterate USB devices present in a USB backend. +. +The starting value of +.Fa pdev +is NULL. +. +This function returns the next USB device in the list. +. +If NULL is returned the end of the USB device list has been reached. +. +.Pp +. +.Fn libusb20_be_dequeue_device +will dequeue the given USB device pointer from the +backend USB device list. +. +Dequeued USB devices will not be freed when the backend is freed. +. +.Pp +. +.Fn libusb20_be_enqueue_device +This function will enqueue the given USB device pointer in the backend USB device list. +. +Enqueued USB devices will get freed when the backend is freed. +. +.Pp +. +.Fn libusb20_be_free +will free the given backend and all USB devices in its device list. +. +. +.Sh USB DESCRIPTOR PARSING +. +.Fn libusb20_me_get_1 pie offset +This function will return a byte at the given byte offset of a message +entity. +. +This function is safe against invalid offsets. +. +.Pp +. +.Fn libusb20_me_get_2 pie offset +This function will return a little endian 16-bit value at the given byte offset of a message +entity. +. +This function is safe against invalid offsets. +. +.Pp +. +.Fn libusb20_me_encode pbuf len pdecoded +This function will encode a so-called *DECODED structure into binary +format. +. +The total encoded length that will fit in the given buffer is +returned. +. +If the buffer pointer is NULL no data will be written to the buffer +location. +. +.Pp +. +.Fn libusb20_me_decode pbuf len pdecoded +This function will decode a binary structure into a so-called *DECODED +structure. +. +The total decoded length is returned. +. +The buffer pointer cannot be NULL. +. +. +.Sh FILES +. +. +/dev/usb +.Sh SEE ALSO +.Xr usb 4 , +.Xr libusb 3 , +.Xr usbconfig 8 +. +. +.Sh HISTORY +. +. +Some parts of the +.Nm +API derives from the libusb project at sourceforge. |
