diff options
Diffstat (limited to 'lib/libc/rpc/rpc_clnt_create.3')
-rw-r--r-- | lib/libc/rpc/rpc_clnt_create.3 | 514 |
1 files changed, 514 insertions, 0 deletions
diff --git a/lib/libc/rpc/rpc_clnt_create.3 b/lib/libc/rpc/rpc_clnt_create.3 new file mode 100644 index 0000000..34c90ed --- /dev/null +++ b/lib/libc/rpc/rpc_clnt_create.3 @@ -0,0 +1,514 @@ +.\" @(#)rpc_clnt_create.3n 1.36 93/08/31 SMI; from SVr4 +.\" Copyright 1989 AT&T +.\" @(#)rpc_clnt_create 1.5 89/07/24 SMI; +.\" Copyright (c) 1988 Sun Microsystems, Inc. - All Rights Reserved. +.\" $NetBSD: rpc_clnt_create.3,v 1.2 2000/06/20 00:53:08 fvdl Exp $ +.\" $FreeBSD$ +.Dd May 7, 1993 +.Dt RPC_CLNT_CREATE 3 +.Os +.Sh NAME +.Nm rpc_clnt_create , +.Nm clnt_control , +.Nm clnt_create , +.Nm clnt_create_timed , +.Nm clnt_create_vers , +.Nm clnt_create_vers_timed , +.Nm clnt_destroy , +.Nm clnt_dg_create , +.Nm clnt_pcreateerror , +.Nm clnt_raw_create , +.Nm clnt_spcreateerror , +.Nm clnt_tli_create , +.Nm clnt_tp_create , +.Nm clnt_tp_create_timed , +.Nm clnt_vc_create , +.Nm rpc_createerr +.Nd "library routines for dealing with creation and manipulation of" +.Vt CLIENT +handles +.Sh LIBRARY +.Lb libc +.Sh SYNOPSIS +.In rpc/rpc.h +.Ft bool_t +.Fn clnt_control "CLIENT *clnt" "const u_int req" "char *info" +.Ft "CLIENT *" +.Fn clnt_create "const char * host" "const rpcprog_t prognum" "const rpcvers_t versnum" "const char *nettype" +.Ft "CLIENT *" +.Fn clnt_create_timed "const char * host" "const rpcprog_t prognum" "const rpcvers_t versnum" "const char *nettype" "const struct timeval *timeout" +.Ft "CLIENT *" +.Fn clnt_create_vers "const char * host" "const rpcprog_t prognum" "rpcvers_t *vers_outp" "const rpcvers_t vers_low" "const rpcvers_t vers_high" "const char *nettype" +.Ft "CLIENT *" +.Fn clnt_create_vers_timed "const char * host" "const rpcprog_t prognum" "rpcvers_t *vers_outp" "const rpcvers_t vers_low" "const rpcvers_t vers_high" "const char *nettype" "const struct timeval *timeout" +.Ft void +.Fn clnt_destroy "CLIENT *clnt" +.Ft "CLIENT *" +.Fn clnt_dg_create "const int fildes" "const struct netbuf *svcaddr" "const rpcprog_t prognum" "const rpcvers_t versnum" "const u_int sendsz" "const u_int recvsz" +.Ft void +.Fn clnt_pcreateerror "const char *s" +.Ft "char *" +.Fn clnt_spcreateerror "const char *s" +.Ft "CLIENT *" +.Fn clnt_raw_create "const rpcprog_t prognum" "const rpcvers_t versnum" +.Ft "CLIENT *" +.Fn clnt_tli_create "const int fildes" "const struct netconfig *netconf" "struct netbuf *svcaddr" "const rpcprog_t prognum" "const rpcvers_t versnum" "const u_int sendsz" "const u_int recvsz" +.Ft "CLIENT *" +.Fn clnt_tp_create "const char * host" "const rpcprog_t prognum" "const rpcvers_t versnum" "const struct netconfig *netconf" +.Ft "CLIENT *" +.Fn clnt_tp_create_timed "const char * host" "const rpcprog_t prognum" "const rpcvers_t versnum" "const struct netconfig *netconf" "const struct timeval *timeout" +.Ft "CLIENT *" +.Fn clnt_vc_create "const int fildes" "const struct netbuf *svcaddr" "const rpcprog_t prognum" "const rpcvers_t versnum" "u_int sendsz" "u_int recvsz" +.Sh DESCRIPTION +RPC library routines allow C language programs to make procedure +calls on other machines across the network. +First a +.Vt CLIENT +handle is created and then the client calls a procedure to send a +request to the server. +On receipt of the request, the server calls a dispatch routine +to perform the requested service, and then sends a reply. +.Sh Routines +.Bl -tag -width YYYYYYY +.It Fn clnt_control +A function macro to change or retrieve various information +about a client object. +The +.Fa req +argument +indicates the type of operation, and +.Fa info +is a pointer to the information. +For both connectionless and connection-oriented transports, +the supported values of +.Fa req +and their argument types and what they do are: +.Bl -column "CLSET_FD_NCLOSE" "struct timeval *" "set total timeout" +.It Dv CLSET_TIMEOUT Ta "struct timeval *" Ta "set total timeout" +.It Dv CLGET_TIMEOUT Ta "struct timeval *" Ta "get total timeout" +.El +.Pp +Note: +if you set the timeout using +.Fn clnt_control , +the timeout argument passed by +.Fn clnt_call +is ignored in all subsequent calls. +.Pp +Note: +If you set the timeout value to 0, +.Fn clnt_control +immediately returns an error +.Pq Dv RPC_TIMEDOUT . +Set the timeout argument to 0 for batching calls. +.Bl -column CLSET_FD_NCLOSE "struct timeval *" +.It Dv CLGET_SVC_ADDR Ta "struct netbuf *" Ta "get servers address" +.It Dv CLGET_FD Ta "int *" Ta "get fd from handle" +.It Dv CLSET_FD_CLOSE Ta "void" Ta "close fd on destroy" +.It Dv CLSET_FD_NCLOSE Ta void Ta "do not close fd on destroy" +.It Dv CLGET_VERS Ta "u_int32_t *" Ta "get RPC program version" +.It Dv CLSET_VERS Ta "u_int32_t *" Ta "set RPC program version" +.It Dv CLGET_XID Ta "u_int32_t *" Ta "get XID of previous call" +.It Dv CLSET_XID Ta "u_int32_t *" Ta "set XID of next call" +.El +.Pp +The following operations are valid for connectionless transports only: +.Bl -column CLSET_RETRY_TIMEOUT "struct timeval *" "set total timeout" +.It Dv CLSET_RETRY_TIMEOUT Ta "struct timeval *" Ta "set the retry timeout" +.It Dv CLGET_RETRY_TIMEOUT Ta "struct timeval *" Ta "get the retry timeout" +.It Dv CLSET_CONNECT Ta Vt "int *" Ta use Xr connect 2 +.El +.Pp +The retry timeout is the time that RPC +waits for the server to reply before retransmitting the request. +The +.Fn clnt_control +function +returns +.Dv TRUE +on success and +.Dv FALSE +on failure. +.It Fn clnt_create +Generic client creation routine for program +.Fa prognum +and version +.Fa versnum . +The +.Fa host +argument +identifies the name of the remote host where the server +is located. +The +.Fa nettype +argument +indicates the class of transport protocol to use. +The transports are tried in left to right order in +.Ev NETPATH +environment variable or in top to bottom order in +the netconfig database. +The +.Fn clnt_create +function +tries all the transports of the +.Fa nettype +class available from the +.Ev NETPATH +environment variable and the netconfig database, +and chooses the first successful one. +A default timeout is set and can be modified using +.Fn clnt_control . +This routine returns +.Dv NULL +if it fails. +The +.Fn clnt_pcreateerror +routine can be used to print the reason for failure. +.Pp +Note: +.Fn clnt_create +returns a valid client handle even +if the particular version number supplied to +.Fn clnt_create +is not registered with the +.Xr rpcbind 8 +service. +This mismatch will be discovered by a +.Fn clnt_call +later (see +.Xr rpc_clnt_calls 3 ) . +.It Fn clnt_create_timed +Generic client creation routine which is similar to +.Fn clnt_create +but which also has the additional argument +.Fa timeout +that specifies the maximum amount of time allowed for +each transport class tried. +In all other respects, the +.Fn clnt_create_timed +call behaves exactly like the +.Fn clnt_create +call. +.It Fn clnt_create_vers +Generic client creation routine which is similar to +.Fn clnt_create +but which also checks for the +version availability. +The +.Fa host +argument +identifies the name of the remote host where the server +is located. +The +.Fa nettype +argument +indicates the class transport protocols to be used. +If the routine is successful it returns a client handle created for +the highest version between +.Fa vers_low +and +.Fa vers_high +that is supported by the server. +The +.Fa vers_outp +argument +is set to this value. +That is, after a successful return +.Fa vers_low +<= +.Fa *vers_outp +<= +.Fa vers_high . +If no version between +.Fa vers_low +and +.Fa vers_high +is supported by the server then the routine fails and returns +.Dv NULL . +A default timeout is set and can be modified using +.Fn clnt_control . +This routine returns +.Dv NULL +if it fails. +The +.Fn clnt_pcreateerror +routine can be used to print the reason for failure. +Note: +.Fn clnt_create +returns a valid client handle even +if the particular version number supplied to +.Fn clnt_create +is not registered with the +.Xr rpcbind 8 +service. +This mismatch will be discovered by a +.Fn clnt_call +later (see +.Xr rpc_clnt_calls 3 ) . +However, +.Fn clnt_create_vers +does this for you and returns a valid handle +only if a version within +the range supplied is supported by the server. +.It Fn clnt_create_vers_timed +Generic client creation routine which is similar to +.Fn clnt_create_vers +but which also has the additional argument +.Fa timeout +that specifies the maximum amount of time allowed for +each transport class tried. +In all other respects, the +.Fn clnt_create_vers_timed +call behaves exactly like the +.Fn clnt_create_vers +call. +.It Fn clnt_destroy +A function macro that destroys the client's RPC handle. +Destruction usually involves deallocation +of private data structures, including +.Fa clnt +itself. +Use of +.Fa clnt +is undefined after calling +.Fn clnt_destroy . +If the RPC library opened the associated file descriptor, or +.Dv CLSET_FD_CLOSE +was set using +.Fn clnt_control , +the file descriptor will be closed. +The caller should call +.Fn auth_destroy "clnt->cl_auth" +(before calling +.Fn clnt_destroy ) +to destroy the associated +.Vt AUTH +structure (see +.Xr rpc_clnt_auth 3 ) . +.It Fn clnt_dg_create +This routine creates an RPC client for the remote program +.Fa prognum +and version +.Fa versnum ; +the client uses a connectionless transport. +The remote program is located at address +.Fa svcaddr . +The +.Fa fildes +argument +is an open and bound file descriptor. +This routine will resend the call message in intervals of +15 seconds until a response is received or until the +call times out. +The total time for the call to time out is specified by +.Fn clnt_call +(see +.Fn clnt_call +in +.Xr rpc_clnt_calls 3 ) . +The retry time out and the total time out periods can +be changed using +.Fn clnt_control . +The user may set the size of the send and receive +buffers with the +.Fa sendsz +and +.Fa recvsz +arguments; +values of 0 choose suitable defaults. +This routine returns +.Dv NULL +if it fails. +.It Fn clnt_pcreateerror +Print a message to standard error indicating +why a client RPC handle could not be created. +The message is prepended with the string +.Fa s +and a colon, and appended with a newline. +.It Fn clnt_spcreateerror +Like +.Fn clnt_pcreateerror , +except that it returns a string +instead of printing to the standard error. +A newline is not appended to the message in this case. +Warning: +returns a pointer to a buffer that is overwritten +on each call. +.It Fn clnt_raw_create +This routine creates an RPC +client handle for the remote program +.Fa prognum +and version +.Fa versnum . +The transport used to pass messages to the service is +a buffer within the process's address space, +so the corresponding RPC +server should live in the same address space; +(see +.Fn svc_raw_create +in +.Xr rpc_svc_create 3 ) . +This allows simulation of RPC and measurement of +RPC overheads, such as round trip times, +without any kernel or networking interference. +This routine returns +.Dv NULL +if it fails. +The +.Fn clnt_raw_create +function +should be called after +.Fn svc_raw_create . +.It Fn clnt_tli_create +This routine creates an RPC +client handle for the remote program +.Fa prognum +and version +.Fa versnum . +The remote program is located at address +.Fa svcaddr . +If +.Fa svcaddr +is +.Dv NULL +and it is connection-oriented, it is assumed that the file descriptor +is connected. +For connectionless transports, if +.Fa svcaddr +is +.Dv NULL , +.Dv RPC_UNKNOWNADDR +error is set. +The +.Fa fildes +argument +is a file descriptor which may be open, bound and connected. +If it is +.Dv RPC_ANYFD , +it opens a file descriptor on the transport specified by +.Fa netconf . +If +.Fa fildes +is +.Dv RPC_ANYFD +and +.Fa netconf +is +.Dv NULL , +a +.Dv RPC_UNKNOWNPROTO +error is set. +If +.Fa fildes +is unbound, then it will attempt to bind the descriptor. +The user may specify the size of the buffers with the +.Fa sendsz +and +.Fa recvsz +arguments; +values of 0 choose suitable defaults. +Depending upon the type of the transport (connection-oriented +or connectionless), +.Fn clnt_tli_create +calls appropriate client creation routines. +This routine returns +.Dv NULL +if it fails. +The +.Fn clnt_pcreateerror +routine can be used to print the reason for failure. +The remote rpcbind +service (see +.Xr rpcbind 8 ) +is not consulted for the address of the remote +service. +.It Fn clnt_tp_create +Like +.Fn clnt_create +except +.Fn clnt_tp_create +tries only one transport specified through +.Fa netconf . +The +.Fn clnt_tp_create +function +creates a client handle for the program +.Fa prognum , +the version +.Fa versnum , +and for the transport specified by +.Fa netconf . +Default options are set, +which can be changed using +.Fn clnt_control +calls. +The remote rpcbind service on the host +.Fa host +is consulted for the address of the remote service. +This routine returns +.Dv NULL +if it fails. +The +.Fn clnt_pcreateerror +routine can be used to print the reason for failure. +.It Fn clnt_tp_create_timed +Like +.Fn clnt_tp_create +except +.Fn clnt_tp_create_timed +has the extra argument +.Fa timeout +which specifies the maximum time allowed for +the creation attempt to succeed. +In all other respects, the +.Fn clnt_tp_create_timed +call behaves exactly like the +.Fn clnt_tp_create +call. +.It Fn clnt_vc_create +This routine creates an RPC +client for the remote program +.Fa prognum +and version +.Fa versnum ; +the client uses a connection-oriented transport. +The remote program is located at address +.Fa svcaddr . +The +.Fa fildes +argument +is an open and bound file descriptor. +The user may specify the size of the send and receive buffers +with the +.Fa sendsz +and +.Fa recvsz +arguments; +values of 0 choose suitable defaults. +This routine returns +.Dv NULL +if it fails. +The address +.Fa svcaddr +should not be +.Dv NULL +and should point to the actual address of the remote program. +The +.Fn clnt_vc_create +function +does not consult the remote rpcbind service for this information. +.It Xo +.Vt "struct rpc_createerr" Va rpc_createerr ; +.Xc +A global variable whose value is set by any RPC +client handle creation routine +that fails. +It is used by the routine +.Fn clnt_pcreateerror +to print the reason for the failure. +.El +.Sh SEE ALSO +.Xr rpc 3 , +.Xr rpc_clnt_auth 3 , +.Xr rpc_clnt_calls 3 , +.Xr rpcbind 8 |