diff options
Diffstat (limited to 'lib/Target/X86/X86InstrInfo.h')
| -rw-r--r-- | lib/Target/X86/X86InstrInfo.h | 136 |
1 files changed, 70 insertions, 66 deletions
diff --git a/lib/Target/X86/X86InstrInfo.h b/lib/Target/X86/X86InstrInfo.h index fcb5a25..8da68b5 100644 --- a/lib/Target/X86/X86InstrInfo.h +++ b/lib/Target/X86/X86InstrInfo.h @@ -33,15 +33,15 @@ namespace X86 { AddrScaleAmt = 1, AddrIndexReg = 2, AddrDisp = 3, - + /// AddrSegmentReg - The operand # of the segment in the memory operand. AddrSegmentReg = 4, /// AddrNumOperands - Total number of operands in a memory reference. AddrNumOperands = 5 }; - - + + // X86 specific condition code. These correspond to X86_*_COND in // X86InstrInfo.td. They must be kept in synch. enum CondCode { @@ -72,16 +72,16 @@ namespace X86 { COND_INVALID }; - + // Turn condition code into conditional branch opcode. unsigned GetCondBranchFromCond(CondCode CC); - + /// GetOppositeBranchCondition - Return the inverse of the specified cond, /// e.g. turning COND_E to COND_NE. CondCode GetOppositeBranchCondition(X86::CondCode CC); } - + /// X86II - This namespace holds all of the target specific flags that /// instruction info tracks. /// @@ -90,14 +90,14 @@ namespace X86II { enum TOF { //===------------------------------------------------------------------===// // X86 Specific MachineOperand flags. - + MO_NO_FLAG, - + /// MO_GOT_ABSOLUTE_ADDRESS - On a symbol operand, this represents a /// relocation of: /// SYMBOL_LABEL + [. - PICBASELABEL] MO_GOT_ABSOLUTE_ADDRESS, - + /// MO_PIC_BASE_OFFSET - On a symbol operand this indicates that the /// immediate should get the value of the symbol minus the PIC base label: /// SYMBOL_LABEL - PICBASELABEL @@ -106,77 +106,77 @@ namespace X86II { /// MO_GOT - On a symbol operand this indicates that the immediate is the /// offset to the GOT entry for the symbol name from the base of the GOT. /// - /// See the X86-64 ELF ABI supplement for more details. + /// See the X86-64 ELF ABI supplement for more details. /// SYMBOL_LABEL @GOT MO_GOT, - + /// MO_GOTOFF - On a symbol operand this indicates that the immediate is - /// the offset to the location of the symbol name from the base of the GOT. + /// the offset to the location of the symbol name from the base of the GOT. /// - /// See the X86-64 ELF ABI supplement for more details. + /// See the X86-64 ELF ABI supplement for more details. /// SYMBOL_LABEL @GOTOFF MO_GOTOFF, - + /// MO_GOTPCREL - On a symbol operand this indicates that the immediate is /// offset to the GOT entry for the symbol name from the current code - /// location. + /// location. /// - /// See the X86-64 ELF ABI supplement for more details. + /// See the X86-64 ELF ABI supplement for more details. /// SYMBOL_LABEL @GOTPCREL MO_GOTPCREL, - + /// MO_PLT - On a symbol operand this indicates that the immediate is - /// offset to the PLT entry of symbol name from the current code location. + /// offset to the PLT entry of symbol name from the current code location. /// - /// See the X86-64 ELF ABI supplement for more details. + /// See the X86-64 ELF ABI supplement for more details. /// SYMBOL_LABEL @PLT MO_PLT, - + /// MO_TLSGD - On a symbol operand this indicates that the immediate is /// some TLS offset. /// - /// See 'ELF Handling for Thread-Local Storage' for more details. + /// See 'ELF Handling for Thread-Local Storage' for more details. /// SYMBOL_LABEL @TLSGD MO_TLSGD, - + /// MO_GOTTPOFF - On a symbol operand this indicates that the immediate is /// some TLS offset. /// - /// See 'ELF Handling for Thread-Local Storage' for more details. + /// See 'ELF Handling for Thread-Local Storage' for more details. /// SYMBOL_LABEL @GOTTPOFF MO_GOTTPOFF, - + /// MO_INDNTPOFF - On a symbol operand this indicates that the immediate is /// some TLS offset. /// - /// See 'ELF Handling for Thread-Local Storage' for more details. + /// See 'ELF Handling for Thread-Local Storage' for more details. /// SYMBOL_LABEL @INDNTPOFF MO_INDNTPOFF, - + /// MO_TPOFF - On a symbol operand this indicates that the immediate is /// some TLS offset. /// - /// See 'ELF Handling for Thread-Local Storage' for more details. + /// See 'ELF Handling for Thread-Local Storage' for more details. /// SYMBOL_LABEL @TPOFF MO_TPOFF, - + /// MO_NTPOFF - On a symbol operand this indicates that the immediate is /// some TLS offset. /// - /// See 'ELF Handling for Thread-Local Storage' for more details. + /// See 'ELF Handling for Thread-Local Storage' for more details. /// SYMBOL_LABEL @NTPOFF MO_NTPOFF, - + /// MO_DLLIMPORT - On a symbol operand "FOO", this indicates that the /// reference is actually to the "__imp_FOO" symbol. This is used for /// dllimport linkage on windows. MO_DLLIMPORT, - + /// MO_DARWIN_STUB - On a symbol operand "FOO", this indicates that the /// reference is actually to the "FOO$stub" symbol. This is used for calls /// and jumps to external functions on Tiger and earlier. MO_DARWIN_STUB, - + /// MO_DARWIN_NONLAZY - On a symbol operand "FOO", this indicates that the /// reference is actually to the "FOO$non_lazy_ptr" symbol, which is a /// non-PIC-base-relative reference to a non-hidden dyld lazy pointer stub. @@ -186,19 +186,19 @@ namespace X86II { /// that the reference is actually to "FOO$non_lazy_ptr - PICBASE", which is /// a PIC-base-relative reference to a non-hidden dyld lazy pointer stub. MO_DARWIN_NONLAZY_PIC_BASE, - + /// MO_DARWIN_HIDDEN_NONLAZY_PIC_BASE - On a symbol operand "FOO", this /// indicates that the reference is actually to "FOO$non_lazy_ptr -PICBASE", /// which is a PIC-base-relative reference to a hidden dyld lazy pointer /// stub. MO_DARWIN_HIDDEN_NONLAZY_PIC_BASE, - + /// MO_TLVP - On a symbol operand this indicates that the immediate is /// some TLS offset. /// /// This is the TLS offset for the Darwin TLS mechanism. MO_TLVP, - + /// MO_TLVP_PIC_BASE - On a symbol operand this indicates that the immediate /// is some TLS offset from the picbase. /// @@ -239,7 +239,7 @@ inline static bool isGlobalRelativeToPICBase(unsigned char TargetFlag) { return false; } } - + /// X86II - This namespace holds all of the target specific flags that /// instruction info tracks. /// @@ -299,7 +299,7 @@ namespace X86II { // MRMInitReg - This form is used for instructions whose source and // destinations are the same register. MRMInitReg = 32, - + //// MRM_C1 - A mod/rm byte of exactly 0xC1. MRM_C1 = 33, MRM_C2 = 34, @@ -318,7 +318,7 @@ namespace X86II { /// immediates, the first of which is a 16-bit immediate (specified by /// the imm encoding) and the second is a 8-bit fixed value. RawFrmImm8 = 43, - + /// RawFrmImm16 - This is used for CALL FAR instructions, which have two /// immediates, the first of which is a 16 or 32-bit immediate (specified by /// the imm encoding) and the second is a 16-bit fixed value. In the AMD @@ -347,7 +347,7 @@ namespace X86II { // set, there is no prefix byte for obtaining a multibyte opcode. // Op0Shift = 8, - Op0Mask = 0xF << Op0Shift, + Op0Mask = 0x1F << Op0Shift, // TB - TwoByte - Set if this instruction has a two byte opcode, which // starts with a 0x0F byte before the real opcode. @@ -368,11 +368,12 @@ namespace X86II { // floating point operations performed in the SSE registers. XD = 11 << Op0Shift, XS = 12 << Op0Shift, - // T8, TA - Prefix after the 0x0F prefix. + // T8, TA, A6, A7 - Prefix after the 0x0F prefix. T8 = 13 << Op0Shift, TA = 14 << Op0Shift, - + A6 = 15 << Op0Shift, A7 = 16 << Op0Shift, + // TF - Prefix before and after 0x0F - TF = 15 << Op0Shift, + TF = 17 << Op0Shift, //===------------------------------------------------------------------===// // REX_W - REX prefixes are instruction prefixes used in 64-bit mode. @@ -380,13 +381,13 @@ namespace X86II { // etc. We only cares about REX.W and REX.R bits and only the former is // statically determined. // - REXShift = 12, + REXShift = Op0Shift + 5, REX_W = 1 << REXShift, //===------------------------------------------------------------------===// // This three-bit field describes the size of an immediate operand. Zero is // unused so that we can tell if we forgot to set a value. - ImmShift = 13, + ImmShift = REXShift + 1, ImmMask = 7 << ImmShift, Imm8 = 1 << ImmShift, Imm8PCRel = 2 << ImmShift, @@ -400,7 +401,7 @@ namespace X86II { // FP Instruction Classification... Zero is non-fp instruction. // FPTypeMask - Mask for all of the FP types... - FPTypeShift = 16, + FPTypeShift = ImmShift + 3, FPTypeMask = 7 << FPTypeShift, // NotFP - The default, set for instructions that do not use FP registers. @@ -433,25 +434,26 @@ namespace X86II { SpecialFP = 7 << FPTypeShift, // Lock prefix - LOCKShift = 19, + LOCKShift = FPTypeShift + 3, LOCK = 1 << LOCKShift, // Segment override prefixes. Currently we just need ability to address // stuff in gs and fs segments. - SegOvrShift = 20, + SegOvrShift = LOCKShift + 1, SegOvrMask = 3 << SegOvrShift, FS = 1 << SegOvrShift, GS = 2 << SegOvrShift, - // Execution domain for SSE instructions in bits 22, 23. - // 0 in bits 22-23 means normal, non-SSE instruction. - SSEDomainShift = 22, + // Execution domain for SSE instructions in bits 23, 24. + // 0 in bits 23-24 means normal, non-SSE instruction. + SSEDomainShift = SegOvrShift + 2, - OpcodeShift = 24, - OpcodeMask = 0xFF << OpcodeShift, + OpcodeShift = SSEDomainShift + 2, + OpcodeMask = 0xFFULL << OpcodeShift, //===------------------------------------------------------------------===// /// VEX - The opcode prefix used by AVX instructions + VEXShift = OpcodeShift + 8, VEX = 1U << 0, /// VEX_W - Has a opcode specific functionality, but is used in the same @@ -473,7 +475,7 @@ namespace X86II { /// if a VR256 register is used, but some AVX instructions also have this /// field marked when using a f256 memory references. VEX_L = 1U << 4, - + /// Has3DNow0F0FOpcode - This flag indicates that the instruction uses the /// wacky 0x0F 0x0F prefix for 3DNow! instructions. The manual documents /// this as having a 0x0F prefix with a 0x0F opcode, and each instruction @@ -482,18 +484,18 @@ namespace X86II { /// this flag to indicate that the encoder should do the wacky 3DNow! thing. Has3DNow0F0FOpcode = 1U << 5 }; - + // getBaseOpcodeFor - This function returns the "base" X86 opcode for the // specified machine instruction. // static inline unsigned char getBaseOpcodeFor(uint64_t TSFlags) { return TSFlags >> X86II::OpcodeShift; } - + static inline bool hasImm(uint64_t TSFlags) { return (TSFlags & X86II::ImmMask) != 0; } - + /// getSizeOfImm - Decode the "size of immediate" field from the TSFlags field /// of the specified instruction. static inline unsigned getSizeOfImm(uint64_t TSFlags) { @@ -508,7 +510,7 @@ namespace X86II { case X86II::Imm64: return 8; } } - + /// isImmPCRel - Return true if the immediate of the specified instruction's /// TSFlags indicates that it is pc relative. static inline unsigned isImmPCRel(uint64_t TSFlags) { @@ -525,7 +527,7 @@ namespace X86II { return false; } } - + /// getMemoryOperandNo - The function returns the MCInst operand # for the /// first field of the memory operand. If the instruction doesn't have a /// memory operand, this returns -1. @@ -549,11 +551,11 @@ namespace X86II { case X86II::MRMDestMem: return 0; case X86II::MRMSrcMem: { - bool HasVEX_4V = (TSFlags >> 32) & X86II::VEX_4V; + bool HasVEX_4V = (TSFlags >> X86II::VEXShift) & X86II::VEX_4V; unsigned FirstMemOp = 1; if (HasVEX_4V) ++FirstMemOp;// Skip the register source (which is encoded in VEX_VVVV). - + // FIXME: Maybe lea should have its own form? This is a horrible hack. //if (Opcode == X86::LEA64r || Opcode == X86::LEA64_32r || // Opcode == X86::LEA16r || Opcode == X86::LEA32r) @@ -613,7 +615,7 @@ inline static bool isMem(const MachineInstr *MI, unsigned Op) { class X86InstrInfo : public TargetInstrInfoImpl { X86TargetMachine &TM; const X86RegisterInfo RI; - + /// RegOp2MemOpTable2Addr, RegOp2MemOpTable0, RegOp2MemOpTable1, /// RegOp2MemOpTable2 - Load / store folding opcode maps. /// @@ -621,7 +623,7 @@ class X86InstrInfo : public TargetInstrInfoImpl { DenseMap<unsigned, std::pair<unsigned,unsigned> > RegOp2MemOpTable0; DenseMap<unsigned, std::pair<unsigned,unsigned> > RegOp2MemOpTable1; DenseMap<unsigned, std::pair<unsigned,unsigned> > RegOp2MemOpTable2; - + /// MemOp2RegOpTable - Load / store unfolding opcode map. /// DenseMap<unsigned, std::pair<unsigned, unsigned> > MemOp2RegOpTable; @@ -795,7 +797,7 @@ public: virtual unsigned getOpcodeAfterMemoryUnfold(unsigned Opc, bool UnfoldLoad, bool UnfoldStore, unsigned *LoadRegIndex = 0) const; - + /// areLoadsFromSameBasePtr - This is used by the pre-regalloc scheduler /// to determine if two loads are loading from the same base address. It /// should only return true if the base pointers are the same and the @@ -805,7 +807,7 @@ public: int64_t &Offset1, int64_t &Offset2) const; /// shouldScheduleLoadsNear - This is a used by the pre-regalloc scheduler to - /// determine (in conjuction with areLoadsFromSameBasePtr) if two loads should + /// determine (in conjunction with areLoadsFromSameBasePtr) if two loads should /// be scheduled togther. On some targets if two loads are loading from /// addresses in the same cache line, it's better if they are scheduled /// together. This function takes two integers that represent the load offsets @@ -829,7 +831,7 @@ public: return (reg == X86::SPL || reg == X86::BPL || reg == X86::SIL || reg == X86::DIL); } - + static bool isX86_64ExtendedReg(const MachineOperand &MO) { if (!MO.isReg()) return false; return isX86_64ExtendedReg(MO.getReg()); @@ -858,11 +860,13 @@ public: const SmallVectorImpl<MachineOperand> &MOs, unsigned Size, unsigned Alignment) const; + bool isHighLatencyDef(int opc) const; + bool hasHighOperandLatency(const InstrItineraryData *ItinData, const MachineRegisterInfo *MRI, const MachineInstr *DefMI, unsigned DefIdx, const MachineInstr *UseMI, unsigned UseIdx) const; - + private: MachineInstr * convertToThreeAddressWithLEA(unsigned MIOpc, MachineFunction::iterator &MFI, |
