diff options
Diffstat (limited to 'gnu/usr.bin/gdb/Makefile.dist')
| -rw-r--r-- | gnu/usr.bin/gdb/Makefile.dist | 371 |
1 files changed, 0 insertions, 371 deletions
diff --git a/gnu/usr.bin/gdb/Makefile.dist b/gnu/usr.bin/gdb/Makefile.dist deleted file mode 100644 index 3cbc91f..0000000 --- a/gnu/usr.bin/gdb/Makefile.dist +++ /dev/null @@ -1,371 +0,0 @@ -/* This file should be run through the C preprocessor by config.gdb - to produce the Makefile. */ - -/* Define this to xgdb if you want to compile xgdb as well as gdb. */ -XGDB= -/* Place to install binaries. */ -bindir=/usr/local/bin -/* Place to install X binaries. */ -xbindir=$(bindir) - -/* System V: If you compile gdb with a compiler which uses the coff - encapsulation feature (this is a function of the compiler used, NOT - of the m-?.h file selected by config.gdb), you must make sure that - the GNU nm is the one that is used by munch. */ - -/* If you are compiling with GCC, make sure that either 1) You use the - -traditional flag, or 2) You have the fixed include files where GCC - can reach them. Otherwise the ioctl calls in inflow.c and readline.c - will be incorrectly compiled. The "fixincludes" script in the gcc - distribution will fix your include files up. */ -/* CC=gcc -traditional */ -CC=cc - -/* It is also possible that you will need to add -I/usr/include/sys to the - CFLAGS section if your system doesn't have fcntl.h in /usr/include (which - is where it should be according to Posix). */ - -YACC=bison -y -v -/* YACC=yacc */ -SHELL=/bin/sh -MAKE=make - -/* Set this up with gcc if you have gnu ld and the loader will print out - line numbers for undefinded refs. */ -/* CC-LD=gcc -static */ -CC-LD=${CC} - -/* If you are using the GNU C library, uncomment the following line. */ -/* HAVE_VPRINTF_DEFINE = -DHAVE_VPRINTF */ - -/* -I. for "#include <obstack.h>". Possibly regex.h also. */ - -/* M_CFLAGS, if defined, has system-dependent CFLAGS. */ -#if !defined(M_CFLAGS) -#define M_CFLAGS -#endif - -/* CFLAGS for both GDB and readline. */ -GLOBAL_CFLAGS = -g M_CFLAGS -CFLAGS = -I. ${HAVE_VPRINTF_DEFINE} ${GLOBAL_CFLAGS} -/* None of the things in CFLAGS will do any harm, and on some systems - (e.g. SunOS4) it is important to use the M_CFLAGS. */ -LDFLAGS = $(CFLAGS) - -/* - define this to be "obstack.o" if you don't have the obstack library installed - you must at the same time define OBSTACK1 as "obstack.o" - so that the dependencies work right. Similarly with REGEX and "regex.o". - You must define REGEX and REGEX1 on USG machines. - If your sysyem is missing alloca(), or, more likely, it's there but - it doesn't work, define ALLOCA & ALLOCA1 */ -OBSTACK = obstack.o -OBSTACK1 = obstack.o - -#ifdef M_REGEX -REGEX = M_REGEX -REGEX1 = M_REGEX -#else -REGEX = -REGEX1 = -#endif - -#ifdef M_ALLOCA -ALLOCA = M_ALLOCA -ALLOCA1 = M_ALLOCA -#else -ALLOCA = -ALLOCA1 = -#endif - -/* - define this to be "malloc.o" if you want to use the gnu malloc routine - (useful for debugging memory allocation problems in gdb). Otherwise, leave - it blank. */ -/* GNU_MALLOC = */ -GNU_MALLOC = malloc.o - -/* Flags to be used in compiling malloc.o - Specify range checking for storage allocation. */ -/* MALLOC_FLAGS = ${CFLAGS} */ -MALLOC_FLAGS = ${CFLAGS} -Drcheck -Dbotch=fatal_dump_core -DMSTATS - -/* Define SYSV if compiling on a system V or HP machine. */ -#ifdef M_SYSV -SYSV_DEFINE = -DSYSV -#else -SYSV_DEFINE = -#endif - -/* MUNCH_DEFINE should be -DSYSV if have System V-style nm, - or null if have BSD-style nm. */ -#ifdef M_BSD_NM -MUNCH_DEFINE = -#else -MUNCH_DEFINE = ${SYSV_DEFINE} -#endif - -/* Flags that describe where you can find the termcap library. - You may need to make other arrangements for USG. */ -TERMCAP = -ltermcap - -/* M_CLIBS, if defined, has system-dependent libs - For example, -lPW for System V to get alloca(). */ -#ifndef M_CLIBS -#define M_CLIBS -#endif -CLIBS = ${ADD_FILES} ${TERMCAP} M_CLIBS - -ADD_FILES = ${OBSTACK} ${REGEX} ${ALLOCA} ${GNU_MALLOC} -ADD_DEPS = ${OBSTACK1} ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} - -SFILES = blockframe.c breakpoint.c dbxread.c coffread.c command.c core.c \ - environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \ - kdb-start.c main.c printcmd.c \ - remote.c source.c stack.c standalone.c stuff.c symmisc.c symtab.c \ - utils.c valarith.c valops.c valprint.c values.c version.c expread.y \ - xgdb.c - -DEPFILES = umax-dep.c gould-dep.c default-dep.c sun3-dep.c \ - sparc-dep.c hp9k320-dep.c hp300bsd-dep.c news-dep.c i386-dep.c \ - symmetry-dep.c convex-dep.c altos-dep.c isi-dep.c pyr-dep.c - -PINSNS = gld-pinsn.c i386-pinsn.c sparc-pinsn.c vax-pinsn.c m68k-pinsn.c \ - ns32k-pinsn.c convex-pinsn.c pyr-pinsn.c - -HFILES = command.h defs.h environ.h expression.h frame.h getpagesize.h \ - inferior.h symseg.h symtab.h value.h wait.h \ - a.out.encap.h a.out.gnu.h stab.gnu.h - -OPCODES = m68k-opcode.h pn-opcode.h sparc-opcode.h npl-opcode.h vax-opcode.h \ - ns32k-opcode.h convex-opcode.h pyr-opcode.h - -MFILES = m-hp9k320.h m-hp300bsd.h m-i386.h m-i386gas.h \ - m-i386-sv32.h m-i386g-sv32.h m-isi.h m-merlin.h \ - m-altos.h m-news.h m-newsos3.h m-npl.h m-pn.h \ - m-sparc.h m-sun2.h m-sun3.h m-sun2os4.h \ - m-sun3os4.h m-sun4os4.h m-umax.h m-vax.h m-symmetry.h m-convex.h \ - m-pyr.h - -/* This list of files really shouldn't be in this makefile, but I can't think - of any good way to get the readline makefile to tell us what files - to put in our tarfile. */ -READLINE = readline.c history.c funmap.c \ - emacs_keymap.c vi_keymap.c vi_mode.c keymaps.c \ - readline.h history.h keymaps.h chardefs.h \ - inc-readline.texinfo inc-history.texinfo \ - readline.texinfo history.texinfo \ - Makefile ChangeLog - -REMOTE_EXAMPLES = remote-sa.m68k.shar remote-multi.shar - -POSSLIBS = obstack.h obstack.c regex.c regex.h malloc.c alloca.c - -TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c - -OTHERS = Makefile.dist createtags munch config.gdb ChangeLog README TAGS \ - gdb.texinfo .gdbinit COPYING expread.tab.c stab.def \ - XGDB-README copying.c Projects Convex.notes copying.awk hp-include - -TAGFILES = ${SFILES} ${DEPFILES} ${PINSNS} ${HFILES} ${OPCODES} ${MFILES} \ - ${POSSLIBS} -TARFILES = ${TAGFILES} ${OTHERS} ${REMOTE_EXAMPLES} - -OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \ - values.o eval.o valops.o valarith.o valprint.o printcmd.o \ - symtab.o symmisc.o coffread.o dbxread.o infcmd.o infrun.o remote.o \ - command.o utils.o expread.o expprint.o pinsn.o environ.o version.o \ - copying.o ${READLINEOBS} - -TSOBS = core.o inflow.o dep.o - -NTSOBS = standalone.o - -TSSTART = /lib/crt0.o - -NTSSTART = kdb-start.o - -RL_LIB = readline/libreadline.a - -/* Do some fancy trickery to produce a line like - -DM_MAKEDEFINE="-DM_SYSV -DM_BSD_NM". -*/ -MD=M_MAKEDEFINE - -/* Avoid funny things that Sun's make throws in for us. */ -/* TARGET_ARCH is supposed to get around it putting in the machine type. - If the "things" up there really is plural, we'll need to do something - else as well. */ -/*.c.o: - ${CC} -c ${CFLAGS} $< */ -TARGET_ARCH= - -all: gdb $(XGDB) - -install: gdb $(XGDB) - cp gdb $(bindir)/gdb.new - mv $(bindir)/gdb.new $(bindir)/gdb - -if [ "$(XGDB)" = xgdb ]; then \ - cp xgdb $(xbindir)/xgdb.new; \ - mv $(xbindir)/xgdb.new $(xbindir)xgdb; \ - fi - -gdb : $(OBS) $(TSOBS) ${ADD_DEPS} ${RL_LIB} - rm -f init.c - ./munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c - ${CC-LD} $(LDFLAGS) -o gdb init.c $(OBS) $(TSOBS) ${RL_LIB} $(CLIBS) - -/* This is useful when debugging GDB, because Unix doesn't let you run GDB - on itself without copying the executable. So "make gdb1" will make - gdb and put a copy in gdb1, and you can run it with "gdb gdb1". */ -gdb1 : gdb - cp gdb gdb1 - -Makefile : Makefile.dist - cp Makefile.dist tmp.c - $(CC) -E >Makefile tmp.c $(MD) "-DM_MAKEDEFINE=$(MD)" - -rm tmp.c -/* This did not work-- -Usparc became "-Usparc" became "-Usparc. - Or something like that. */ -/* $(CC) -E >Makefile tmp.c $(MD) "-DM_MAKEDEFINE=\"$(MD)\"" */ - -xgdb : $(OBS) $(TSOBS) xgdb.o ${ADD_DEPS} ${RL_LIB} - rm -f init.c - ./munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) xgdb.o > init.c - $(CC-LD) $(LDFLAGS) -o xgdb init.c $(OBS) $(TSOBS) xgdb.o \ - -lXaw -lXmu -lXt -lX11 ${RL_LIB} $(CLIBS) - -/* Old (pre R3) xgdb comp. - $(CC-LD) $(LDFLAGS) -o xgdb init.c $(OBS) $(TSOBS) xgdb.o \ - -lXaw -lXt -lX11 $(CLIBS) */ - -kdb : $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${RL_LIB} - rm -f init.c - ./munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c - $(CC) $(LDFLAGS) -c init.c $(CLIBS) - ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o ${RL_LIB} -lc $(CLIBS) - -/* If it can figure out the appropriate order, createtags will make sure - that the proper m-*, *-dep, *-pinsn, and *-opcode files come first - in the tags list. It will attempt to do the same for dbxread.c and - coffread.c. This makes using M-. on machine dependent routines much - easier. */ - -TAGS: ${TAGFILES} - createtags ${TAGFILES} -tags: TAGS - -gdb.tar: ${TARFILES} - rm -f gdb.tar - mkdir dist-gdb - cd dist-gdb ; for i in ${TARFILES} ; do ln -s ../$$i . ; done - mkdir dist-gdb/readline - cd dist-gdb/readline ; for i in ${READLINE} ; do ln -s ../../readline/$$i . ; done - tar chf gdb.tar dist-gdb - rm -rf dist-gdb - -/* Remove gdb.tar.Z so stupid compress doesn't ask whether we want to - overwrite it. compress -f is not what we want, because we do want - to know if compress would not make it smaller. */ -gdb.tar.Z: gdb.tar - if [ -f gdb.tar.Z ]; then rm -f gdb.tar.Z; else true; fi - compress gdb.tar - -clean: - rm -f ${OBS} ${TSOBS} ${NTSOBS} ${OBSTACK} ${REGEX} ${GNU_MALLOC} - rm -f init.c init.o - rm -f xgdb.o xgdb - rm -f gdb core gdb.tar gdb.tar.Z make.log - rm -f gdb[0-9] - cd readline ; make clean - -distclean: clean expread.tab.c TAGS - rm -f dep.c opcode.h param.h pinsn.c config.status - rm -f y.output yacc.acts yacc.tmp - rm -f ${TESTS} Makefile - -realclean: clean - rm -f expread.tab.c TAGS - rm -f dep.c opcode.h param.h pinsn.c config.status - rm -f Makefile - -xgdb.o : defs.h param.h symtab.h frame.h - -/* Make copying.c from COPYING */ -copying.c : COPYING copying.awk - awk -f copying.awk < COPYING > copying.c - -expread.tab.c : expread.y - @echo 'Expect 4 shift/reduce conflict.' - ${YACC} expread.y - mv y.tab.c expread.tab.c - -expread.o : expread.tab.c defs.h param.h symtab.h frame.h expression.h - $(CC) -c ${CFLAGS} expread.tab.c - mv expread.tab.o expread.o - -readline/libreadline.a : force_update - cd readline ; ${MAKE} "SYSV=${SYSV_DEFINE}" \ - "DEBUG_FLAGS=${GLOBAL_CFLAGS}" "CC=${CC}" libreadline.a - -force_update : - -/* Only useful if you are using the gnu malloc routines. */ -malloc.o : malloc.c - ${CC} -c ${MALLOC_FLAGS} malloc.c - -/* dep.o depends on config.status in case someone reconfigures gdb out - from under an already compiled gdb. */ -dep.o : dep.c config.status defs.h param.h frame.h inferior.h obstack.h \ - a.out.encap.h - -/* pinsn.o depends on config.status in case someone reconfigures gdb out - from under an already compiled gdb. */ -pinsn.o : pinsn.c config.status defs.h param.h symtab.h obstack.h symseg.h \ - frame.h opcode.h - -/* The rest of this is a standard dependencies list (hand edited output of - cpp -M). It does not include dependencies of .o files on .c files. */ -/* All files which depend on config.status also depend on param.h in case - someone reconfigures gdb out from under an already compiled gdb. */ -blockframe.o : defs.h param.h config.status symtab.h obstack.h symseg.h frame.h -breakpoint.o : defs.h param.h config.status symtab.h obstack.h symseg.h frame.h -coffread.o : defs.h param.h config.status -command.o : command.h defs.h -core.o : defs.h param.h config.status a.out.encap.h -dbxread.o : param.h config.status defs.h symtab.h obstack.h symseg.h a.out.encap.h \ - stab.gnu.h -environ.o : environ.h -eval.o : defs.h param.h config.status symtab.h obstack.h symseg.h value.h expression.h -expprint.o : defs.h symtab.h obstack.h symseg.h param.h config.status expression.h -findvar.o : defs.h param.h config.status symtab.h obstack.h symseg.h frame.h value.h -infcmd.o : defs.h param.h config.status symtab.h obstack.h symseg.h frame.h inferior.h \ - environ.h value.h -inflow.o : defs.h param.h config.status frame.h inferior.h -infrun.o : defs.h param.h config.status symtab.h obstack.h symseg.h frame.h inferior.h \ - wait.h -kdb-start.o : defs.h param.h config.status -main.o : defs.h command.h param.h config.status -malloc.o : getpagesize.h -obstack.o : obstack.h -printcmd.o : defs.h param.h config.status frame.h symtab.h obstack.h symseg.h value.h \ - expression.h -regex.o : regex.h -remote.o : defs.h param.h config.status frame.h inferior.h wait.h -source.o : defs.h symtab.h obstack.h symseg.h param.h config.status -stack.o : defs.h param.h config.status symtab.h obstack.h symseg.h frame.h -standalone.o : defs.h param.h config.status symtab.h obstack.h symseg.h frame.h \ - inferior.h wait.h -symmisc.o : defs.h symtab.h obstack.h symseg.h obstack.h -symtab.o : defs.h symtab.h obstack.h symseg.h param.h config.status obstack.h -utils.o : defs.h param.h config.status -valarith.o : defs.h param.h config.status symtab.h obstack.h symseg.h value.h expression.h -valops.o : defs.h param.h config.status symtab.h obstack.h symseg.h value.h frame.h \ - inferior.h -valprint.o : defs.h param.h config.status symtab.h obstack.h symseg.h value.h -values.o : defs.h param.h config.status symtab.h obstack.h symseg.h value.h - -robotussin.h : getpagesize.h -symtab.h : obstack.h symseg.h -a.out.encap.h : a.out.gnu.h - |
