diff options
Diffstat (limited to 'gnu/usr.bin/cc/doc/rtl.texi')
-rw-r--r-- | gnu/usr.bin/cc/doc/rtl.texi | 2800 |
1 files changed, 2800 insertions, 0 deletions
diff --git a/gnu/usr.bin/cc/doc/rtl.texi b/gnu/usr.bin/cc/doc/rtl.texi new file mode 100644 index 0000000..6da63f2 --- /dev/null +++ b/gnu/usr.bin/cc/doc/rtl.texi @@ -0,0 +1,2800 @@ +@c Copyright (C) 1988, 1989, 1992, 1994 Free Software Foundation, Inc. +@c This is part of the GCC manual. +@c For copying conditions, see the file gcc.texi. + +@node RTL +@chapter RTL Representation +@cindex RTL representation +@cindex representation of RTL +@cindex Register Transfer Language (RTL) + +Most of the work of the compiler is done on an intermediate representation +called register transfer language. In this language, the instructions to be +output are described, pretty much one by one, in an algebraic form that +describes what the instruction does. + +RTL is inspired by Lisp lists. It has both an internal form, made up of +structures that point at other structures, and a textual form that is used +in the machine description and in printed debugging dumps. The textual +form uses nested parentheses to indicate the pointers in the internal form. + +@menu +* RTL Objects:: Expressions vs vectors vs strings vs integers. +* Accessors:: Macros to access expression operands or vector elts. +* Flags:: Other flags in an RTL expression. +* Machine Modes:: Describing the size and format of a datum. +* Constants:: Expressions with constant values. +* Regs and Memory:: Expressions representing register contents or memory. +* Arithmetic:: Expressions representing arithmetic on other expressions. +* Comparisons:: Expressions representing comparison of expressions. +* Bit Fields:: Expressions representing bitfields in memory or reg. +* Conversions:: Extending, truncating, floating or fixing. +* RTL Declarations:: Declaring volatility, constancy, etc. +* Side Effects:: Expressions for storing in registers, etc. +* Incdec:: Embedded side-effects for autoincrement addressing. +* Assembler:: Representing @code{asm} with operands. +* Insns:: Expression types for entire insns. +* Calls:: RTL representation of function call insns. +* Sharing:: Some expressions are unique; others *must* be copied. +* Reading RTL:: Reading textual RTL from a file. +@end menu + +@node RTL Objects, Accessors, RTL, RTL +@section RTL Object Types +@cindex RTL object types + +@cindex RTL integers +@cindex RTL strings +@cindex RTL vectors +@cindex RTL expression +@cindex RTX (See RTL) +RTL uses five kinds of objects: expressions, integers, wide integers, +strings and vectors. Expressions are the most important ones. An RTL +expression (``RTX'', for short) is a C structure, but it is usually +referred to with a pointer; a type that is given the typedef name +@code{rtx}. + +An integer is simply an @code{int}; their written form uses decimal digits. +A wide integer is an integral object whose type is @code{HOST_WIDE_INT} +(@pxref{Config}); their written form uses decimal digits. + +A string is a sequence of characters. In core it is represented as a +@code{char *} in usual C fashion, and it is written in C syntax as well. +However, strings in RTL may never be null. If you write an empty string in +a machine description, it is represented in core as a null pointer rather +than as a pointer to a null character. In certain contexts, these null +pointers instead of strings are valid. Within RTL code, strings are most +commonly found inside @code{symbol_ref} expressions, but they appear in +other contexts in the RTL expressions that make up machine descriptions. + +A vector contains an arbitrary number of pointers to expressions. The +number of elements in the vector is explicitly present in the vector. +The written form of a vector consists of square brackets +(@samp{[@dots{}]}) surrounding the elements, in sequence and with +whitespace separating them. Vectors of length zero are not created; +null pointers are used instead. + +@cindex expression codes +@cindex codes, RTL expression +@findex GET_CODE +@findex PUT_CODE +Expressions are classified by @dfn{expression codes} (also called RTX +codes). The expression code is a name defined in @file{rtl.def}, which is +also (in upper case) a C enumeration constant. The possible expression +codes and their meanings are machine-independent. The code of an RTX can +be extracted with the macro @code{GET_CODE (@var{x})} and altered with +@code{PUT_CODE (@var{x}, @var{newcode})}. + +The expression code determines how many operands the expression contains, +and what kinds of objects they are. In RTL, unlike Lisp, you cannot tell +by looking at an operand what kind of object it is. Instead, you must know +from its context---from the expression code of the containing expression. +For example, in an expression of code @code{subreg}, the first operand is +to be regarded as an expression and the second operand as an integer. In +an expression of code @code{plus}, there are two operands, both of which +are to be regarded as expressions. In a @code{symbol_ref} expression, +there is one operand, which is to be regarded as a string. + +Expressions are written as parentheses containing the name of the +expression type, its flags and machine mode if any, and then the operands +of the expression (separated by spaces). + +Expression code names in the @samp{md} file are written in lower case, +but when they appear in C code they are written in upper case. In this +manual, they are shown as follows: @code{const_int}. + +@cindex (nil) +@cindex nil +In a few contexts a null pointer is valid where an expression is normally +wanted. The written form of this is @code{(nil)}. + +@node Accessors, Flags, RTL Objects, RTL +@section Access to Operands +@cindex accessors +@cindex access to operands +@cindex operand access + +@cindex RTL format +For each expression type @file{rtl.def} specifies the number of +contained objects and their kinds, with four possibilities: @samp{e} for +expression (actually a pointer to an expression), @samp{i} for integer, +@samp{w} for wide integer, @samp{s} for string, and @samp{E} for vector +of expressions. The sequence of letters for an expression code is +called its @dfn{format}. Thus, the format of @code{subreg} is +@samp{ei}.@refill + +@cindex RTL format characters +A few other format characters are used occasionally: + +@table @code +@item u +@samp{u} is equivalent to @samp{e} except that it is printed differently +in debugging dumps. It is used for pointers to insns. + +@item n +@samp{n} is equivalent to @samp{i} except that it is printed differently +in debugging dumps. It is used for the line number or code number of a +@code{note} insn. + +@item S +@samp{S} indicates a string which is optional. In the RTL objects in +core, @samp{S} is equivalent to @samp{s}, but when the object is read, +from an @samp{md} file, the string value of this operand may be omitted. +An omitted string is taken to be the null string. + +@item V +@samp{V} indicates a vector which is optional. In the RTL objects in +core, @samp{V} is equivalent to @samp{E}, but when the object is read +from an @samp{md} file, the vector value of this operand may be omitted. +An omitted vector is effectively the same as a vector of no elements. + +@item 0 +@samp{0} means a slot whose contents do not fit any normal category. +@samp{0} slots are not printed at all in dumps, and are often used in +special ways by small parts of the compiler. +@end table + +There are macros to get the number of operands, the format, and the +class of an expression code: + +@table @code +@findex GET_RTX_LENGTH +@item GET_RTX_LENGTH (@var{code}) +Number of operands of an RTX of code @var{code}. + +@findex GET_RTX_FORMAT +@item GET_RTX_FORMAT (@var{code}) +The format of an RTX of code @var{code}, as a C string. + +@findex GET_RTX_CLASS +@cindex classes of RTX codes +@item GET_RTX_CLASS (@var{code}) +A single character representing the type of RTX operation that code +@var{code} performs. + +The following classes are defined: + +@table @code +@item o +An RTX code that represents an actual object, such as @code{reg} or +@code{mem}. @code{subreg} is not in this class. + +@item < +An RTX code for a comparison. The codes in this class are +@code{NE}, @code{EQ}, @code{LE}, @code{LT}, @code{GE}, @code{GT}, +@code{LEU}, @code{LTU}, @code{GEU}, @code{GTU}.@refill + +@item 1 +An RTX code for a unary arithmetic operation, such as @code{neg}. + +@item c +An RTX code for a commutative binary operation, other than @code{NE} +and @code{EQ} (which have class @samp{<}). + +@item 2 +An RTX code for a noncommutative binary operation, such as @code{MINUS}. + +@item b +An RTX code for a bitfield operation, either @code{ZERO_EXTRACT} or +@code{SIGN_EXTRACT}. + +@item 3 +An RTX code for other three input operations, such as @code{IF_THEN_ELSE}. + +@item i +An RTX code for a machine insn (@code{INSN}, @code{JUMP_INSN}, and +@code{CALL_INSN}).@refill + +@item m +An RTX code for something that matches in insns, such as @code{MATCH_DUP}. + +@item x +All other RTX codes. +@end table +@end table + +@findex XEXP +@findex XINT +@findex XWINT +@findex XSTR +Operands of expressions are accessed using the macros @code{XEXP}, +@code{XINT}, @code{XWINT} and @code{XSTR}. Each of these macros takes +two arguments: an expression-pointer (RTX) and an operand number +(counting from zero). Thus,@refill + +@example +XEXP (@var{x}, 2) +@end example + +@noindent +accesses operand 2 of expression @var{x}, as an expression. + +@example +XINT (@var{x}, 2) +@end example + +@noindent +accesses the same operand as an integer. @code{XSTR}, used in the same +fashion, would access it as a string. + +Any operand can be accessed as an integer, as an expression or as a string. +You must choose the correct method of access for the kind of value actually +stored in the operand. You would do this based on the expression code of +the containing expression. That is also how you would know how many +operands there are. + +For example, if @var{x} is a @code{subreg} expression, you know that it has +two operands which can be correctly accessed as @code{XEXP (@var{x}, 0)} +and @code{XINT (@var{x}, 1)}. If you did @code{XINT (@var{x}, 0)}, you +would get the address of the expression operand but cast as an integer; +that might occasionally be useful, but it would be cleaner to write +@code{(int) XEXP (@var{x}, 0)}. @code{XEXP (@var{x}, 1)} would also +compile without error, and would return the second, integer operand cast as +an expression pointer, which would probably result in a crash when +accessed. Nothing stops you from writing @code{XEXP (@var{x}, 28)} either, +but this will access memory past the end of the expression with +unpredictable results.@refill + +Access to operands which are vectors is more complicated. You can use the +macro @code{XVEC} to get the vector-pointer itself, or the macros +@code{XVECEXP} and @code{XVECLEN} to access the elements and length of a +vector. + +@table @code +@findex XVEC +@item XVEC (@var{exp}, @var{idx}) +Access the vector-pointer which is operand number @var{idx} in @var{exp}. + +@findex XVECLEN +@item XVECLEN (@var{exp}, @var{idx}) +Access the length (number of elements) in the vector which is +in operand number @var{idx} in @var{exp}. This value is an @code{int}. + +@findex XVECEXP +@item XVECEXP (@var{exp}, @var{idx}, @var{eltnum}) +Access element number @var{eltnum} in the vector which is +in operand number @var{idx} in @var{exp}. This value is an RTX. + +It is up to you to make sure that @var{eltnum} is not negative +and is less than @code{XVECLEN (@var{exp}, @var{idx})}. +@end table + +All the macros defined in this section expand into lvalues and therefore +can be used to assign the operands, lengths and vector elements as well as +to access them. + +@node Flags, Machine Modes, Accessors, RTL +@section Flags in an RTL Expression +@cindex flags in RTL expression + +RTL expressions contain several flags (one-bit bitfields) that are used +in certain types of expression. Most often they are accessed with the +following macros: + +@table @code +@findex MEM_VOLATILE_P +@cindex @code{mem} and @samp{/v} +@cindex @code{volatil}, in @code{mem} +@cindex @samp{/v} in RTL dump +@item MEM_VOLATILE_P (@var{x}) +In @code{mem} expressions, nonzero for volatile memory references. +Stored in the @code{volatil} field and printed as @samp{/v}. + +@findex MEM_IN_STRUCT_P +@cindex @code{mem} and @samp{/s} +@cindex @code{in_struct}, in @code{mem} +@cindex @samp{/s} in RTL dump +@item MEM_IN_STRUCT_P (@var{x}) +In @code{mem} expressions, nonzero for reference to an entire +structure, union or array, or to a component of one. Zero for +references to a scalar variable or through a pointer to a scalar. +Stored in the @code{in_struct} field and printed as @samp{/s}. + +@findex REG_LOOP_TEST_P +@cindex @code{reg} and @samp{/s} +@cindex @code{in_struct}, in @code{reg} +@item REG_LOOP_TEST_P +In @code{reg} expressions, nonzero if this register's entire life is +contained in the exit test code for some loop. Stored in the +@code{in_struct} field and printed as @samp{/s}. + +@findex REG_USERVAR_P +@cindex @code{reg} and @samp{/v} +@cindex @code{volatil}, in @code{reg} +@item REG_USERVAR_P (@var{x}) +In a @code{reg}, nonzero if it corresponds to a variable present in +the user's source code. Zero for temporaries generated internally by +the compiler. Stored in the @code{volatil} field and printed as +@samp{/v}. + +@cindex @samp{/i} in RTL dump +@findex REG_FUNCTION_VALUE_P +@cindex @code{reg} and @samp{/i} +@cindex @code{integrated}, in @code{reg} +@item REG_FUNCTION_VALUE_P (@var{x}) +Nonzero in a @code{reg} if it is the place in which this function's +value is going to be returned. (This happens only in a hard +register.) Stored in the @code{integrated} field and printed as +@samp{/i}. + +The same hard register may be used also for collecting the values of +functions called by this one, but @code{REG_FUNCTION_VALUE_P} is zero +in this kind of use. + +@findex SUBREG_PROMOTED_VAR_P +@cindex @code{subreg} and @samp{/s} +@cindex @code{in_struct}, in @code{subreg} +@item SUBREG_PROMOTED_VAR_P +Nonzero in a @code{subreg} if it was made when accessing an object that +was promoted to a wider mode in accord with the @code{PROMOTED_MODE} machine +description macro (@pxref{Storage Layout}). In this case, the mode of +the @code{subreg} is the declared mode of the object and the mode of +@code{SUBREG_REG} is the mode of the register that holds the object. +Promoted variables are always either sign- or zero-extended to the wider +mode on every assignment. Stored in the @code{in_struct} field and +printed as @samp{/s}. + +@findex SUBREG_PROMOTED_UNSIGNED_P +@cindex @code{subreg} and @samp{/u} +@cindex @code{unchanging}, in @code{subreg} +@item SUBREG_PROMOTED_UNSIGNED_P +Nonzero in a @code{subreg} that has @code{SUBREG_PROMOTED_VAR_P} nonzero +if the object being referenced is kept zero-extended and zero if it +is kept sign-extended. Stored in the @code{unchanging} field and +printed as @samp{/u}. + +@findex RTX_UNCHANGING_P +@cindex @code{reg} and @samp{/u} +@cindex @code{mem} and @samp{/u} +@cindex @code{unchanging}, in @code{reg} and @code{mem} +@cindex @samp{/u} in RTL dump +@item RTX_UNCHANGING_P (@var{x}) +Nonzero in a @code{reg} or @code{mem} if the value is not changed. +(This flag is not set for memory references via pointers to constants. +Such pointers only guarantee that the object will not be changed +explicitly by the current function. The object might be changed by +other functions or by aliasing.) Stored in the +@code{unchanging} field and printed as @samp{/u}. + +@findex RTX_INTEGRATED_P +@cindex @code{integrated}, in @code{insn} +@item RTX_INTEGRATED_P (@var{insn}) +Nonzero in an insn if it resulted from an in-line function call. +Stored in the @code{integrated} field and printed as @samp{/i}. This +may be deleted; nothing currently depends on it. + +@findex SYMBOL_REF_USED +@cindex @code{used}, in @code{symbol_ref} +@item SYMBOL_REF_USED (@var{x}) +In a @code{symbol_ref}, indicates that @var{x} has been used. This is +normally only used to ensure that @var{x} is only declared external +once. Stored in the @code{used} field. + +@findex SYMBOL_REF_FLAG +@cindex @code{symbol_ref} and @samp{/v} +@cindex @code{volatil}, in @code{symbol_ref} +@item SYMBOL_REF_FLAG (@var{x}) +In a @code{symbol_ref}, this is used as a flag for machine-specific purposes. +Stored in the @code{volatil} field and printed as @samp{/v}. + +@findex LABEL_OUTSIDE_LOOP_P +@cindex @code{label_ref} and @samp{/s} +@cindex @code{in_struct}, in @code{label_ref} +@item LABEL_OUTSIDE_LOOP_P +In @code{label_ref} expressions, nonzero if this is a reference to a +label that is outside the innermost loop containing the reference to the +label. Stored in the @code{in_struct} field and printed as @samp{/s}. + +@findex INSN_DELETED_P +@cindex @code{volatil}, in @code{insn} +@item INSN_DELETED_P (@var{insn}) +In an insn, nonzero if the insn has been deleted. Stored in the +@code{volatil} field and printed as @samp{/v}. + +@findex INSN_ANNULLED_BRANCH_P +@cindex @code{insn} and @samp{/u} +@cindex @code{unchanging}, in @code{insn} +@item INSN_ANNULLED_BRANCH_P (@var{insn}) +In an @code{insn} in the delay slot of a branch insn, indicates that an +annulling branch should be used. See the discussion under +@code{sequence} below. Stored in the @code{unchanging} field and printed +as @samp{/u}. + +@findex INSN_FROM_TARGET_P +@cindex @code{insn} and @samp{/s} +@cindex @code{in_struct}, in @code{insn} +@cindex @samp{/s} in RTL dump +@item INSN_FROM_TARGET_P (@var{insn}) +In an @code{insn} in a delay slot of a branch, indicates that the insn +is from the target of the branch. If the branch insn has +@code{INSN_ANNULLED_BRANCH_P} set, this insn should only be executed if +the branch is taken. For annulled branches with this bit clear, the +insn should be executed only if the branch is not taken. Stored in the +@code{in_struct} field and printed as @samp{/s}. + +@findex CONSTANT_POOL_ADDRESS_P +@cindex @code{symbol_ref} and @samp{/u} +@cindex @code{unchanging}, in @code{symbol_ref} +@item CONSTANT_POOL_ADDRESS_P (@var{x}) +Nonzero in a @code{symbol_ref} if it refers to part of the current +function's ``constants pool''. These are addresses close to the +beginning of the function, and GNU CC assumes they can be addressed +directly (perhaps with the help of base registers). Stored in the +@code{unchanging} field and printed as @samp{/u}. + +@findex CONST_CALL_P +@cindex @code{call_insn} and @samp{/u} +@cindex @code{unchanging}, in @code{call_insn} +@item CONST_CALL_P (@var{x}) +In a @code{call_insn}, indicates that the insn represents a call to a const +function. Stored in the @code{unchanging} field and printed as @samp{/u}. + +@findex LABEL_PRESERVE_P +@cindex @code{code_label} and @samp{/i} +@cindex @code{in_struct}, in @code{code_label} +@item LABEL_PRESERVE_P (@var{x}) +In a @code{code_label}, indicates that the label can never be deleted. +Labels referenced by a non-local goto will have this bit set. Stored +in the @code{in_struct} field and printed as @samp{/s}. + +@findex SCHED_GROUP_P +@cindex @code{insn} and @samp{/i} +@cindex @code{in_struct}, in @code{insn} +@item SCHED_GROUP_P (@var{insn}) +During instruction scheduling, in an insn, indicates that the previous insn +must be scheduled together with this insn. This is used to ensure that +certain groups of instructions will not be split up by the instruction +scheduling pass, for example, @code{use} insns before a @code{call_insn} may +not be separated from the @code{call_insn}. Stored in the @code{in_struct} +field and printed as @samp{/s}. +@end table + +These are the fields which the above macros refer to: + +@table @code +@findex used +@item used +Normally, this flag is used only momentarily, at the end of RTL +generation for a function, to count the number of times an expression +appears in insns. Expressions that appear more than once are copied, +according to the rules for shared structure (@pxref{Sharing}). + +In a @code{symbol_ref}, it indicates that an external declaration for +the symbol has already been written. + +In a @code{reg}, it is used by the leaf register renumbering code to ensure +that each register is only renumbered once. + +@findex volatil +@item volatil +This flag is used in @code{mem}, @code{symbol_ref} and @code{reg} +expressions and in insns. In RTL dump files, it is printed as +@samp{/v}. + +@cindex volatile memory references +In a @code{mem} expression, it is 1 if the memory reference is volatile. +Volatile memory references may not be deleted, reordered or combined. + +In a @code{symbol_ref} expression, it is used for machine-specific +purposes. + +In a @code{reg} expression, it is 1 if the value is a user-level variable. +0 indicates an internal compiler temporary. + +In an insn, 1 means the insn has been deleted. + +@findex in_struct +@item in_struct +In @code{mem} expressions, it is 1 if the memory datum referred to is +all or part of a structure or array; 0 if it is (or might be) a scalar +variable. A reference through a C pointer has 0 because the pointer +might point to a scalar variable. This information allows the compiler +to determine something about possible cases of aliasing. + +In an insn in the delay slot of a branch, 1 means that this insn is from +the target of the branch. + +During instruction scheduling, in an insn, 1 means that this insn must be +scheduled as part of a group together with the previous insn. + +In @code{reg} expressions, it is 1 if the register has its entire life +contained within the test expression of some loop. + +In @code{subreg} expressions, 1 means that the @code{subreg} is accessing +an object that has had its mode promoted from a wider mode. + +In @code{label_ref} expressions, 1 means that the referenced label is +outside the innermost loop containing the insn in which the @code{label_ref} +was found. + +In @code{code_label} expressions, it is 1 if the label may never be deleted. +This is used for labels which are the target of non-local gotos. + +In an RTL dump, this flag is represented as @samp{/s}. + +@findex unchanging +@item unchanging +In @code{reg} and @code{mem} expressions, 1 means +that the value of the expression never changes. + +In @code{subreg} expressions, it is 1 if the @code{subreg} references an +unsigned object whose mode has been promoted to a wider mode. + +In an insn, 1 means that this is an annulling branch. + +In a @code{symbol_ref} expression, 1 means that this symbol addresses +something in the per-function constants pool. + +In a @code{call_insn}, 1 means that this instruction is a call to a +const function. + +In an RTL dump, this flag is represented as @samp{/u}. + +@findex integrated +@item integrated +In some kinds of expressions, including insns, this flag means the +rtl was produced by procedure integration. + +In a @code{reg} expression, this flag indicates the register +containing the value to be returned by the current function. On +machines that pass parameters in registers, the same register number +may be used for parameters as well, but this flag is not set on such +uses. +@end table + +@node Machine Modes, Constants, Flags, RTL +@section Machine Modes +@cindex machine modes + +@findex enum machine_mode +A machine mode describes a size of data object and the representation used +for it. In the C code, machine modes are represented by an enumeration +type, @code{enum machine_mode}, defined in @file{machmode.def}. Each RTL +expression has room for a machine mode and so do certain kinds of tree +expressions (declarations and types, to be precise). + +In debugging dumps and machine descriptions, the machine mode of an RTL +expression is written after the expression code with a colon to separate +them. The letters @samp{mode} which appear at the end of each machine mode +name are omitted. For example, @code{(reg:SI 38)} is a @code{reg} +expression with machine mode @code{SImode}. If the mode is +@code{VOIDmode}, it is not written at all. + +Here is a table of machine modes. The term ``byte'' below refers to an +object of @code{BITS_PER_UNIT} bits (@pxref{Storage Layout}). + +@table @code +@findex QImode +@item QImode +``Quarter-Integer'' mode represents a single byte treated as an integer. + +@findex HImode +@item HImode +``Half-Integer'' mode represents a two-byte integer. + +@findex PSImode +@item PSImode +``Partial Single Integer'' mode represents an integer which occupies +four bytes but which doesn't really use all four. On some machines, +this is the right mode to use for pointers. + +@findex SImode +@item SImode +``Single Integer'' mode represents a four-byte integer. + +@findex PDImode +@item PDImode +``Partial Double Integer'' mode represents an integer which occupies +eight bytes but which doesn't really use all eight. On some machines, +this is the right mode to use for certain pointers. + +@findex DImode +@item DImode +``Double Integer'' mode represents an eight-byte integer. + +@findex TImode +@item TImode +``Tetra Integer'' (?) mode represents a sixteen-byte integer. + +@findex SFmode +@item SFmode +``Single Floating'' mode represents a single-precision (four byte) floating +point number. + +@findex DFmode +@item DFmode +``Double Floating'' mode represents a double-precision (eight byte) floating +point number. + +@findex XFmode +@item XFmode +``Extended Floating'' mode represents a triple-precision (twelve byte) +floating point number. This mode is used for IEEE extended floating +point. + +@findex TFmode +@item TFmode +``Tetra Floating'' mode represents a quadruple-precision (sixteen byte) +floating point number. + +@findex CCmode +@item CCmode +``Condition Code'' mode represents the value of a condition code, which +is a machine-specific set of bits used to represent the result of a +comparison operation. Other machine-specific modes may also be used for +the condition code. These modes are not used on machines that use +@code{cc0} (see @pxref{Condition Code}). + +@findex BLKmode +@item BLKmode +``Block'' mode represents values that are aggregates to which none of +the other modes apply. In RTL, only memory references can have this mode, +and only if they appear in string-move or vector instructions. On machines +which have no such instructions, @code{BLKmode} will not appear in RTL. + +@findex VOIDmode +@item VOIDmode +Void mode means the absence of a mode or an unspecified mode. +For example, RTL expressions of code @code{const_int} have mode +@code{VOIDmode} because they can be taken to have whatever mode the context +requires. In debugging dumps of RTL, @code{VOIDmode} is expressed by +the absence of any mode. + +@findex SCmode +@findex DCmode +@findex XCmode +@findex TCmode +@item SCmode, DCmode, XCmode, TCmode +These modes stand for a complex number represented as a pair of floating +point values. The floating point values are in @code{SFmode}, +@code{DFmode}, @code{XFmode}, and @code{TFmode}, respectively. + +@findex CQImode +@findex CHImode +@findex CSImode +@findex CDImode +@findex CTImode +@findex COImode +@item CQImode, CHImode, CSImode, CDImode, CTImode, COImode +These modes stand for a complex number represented as a pair of integer +values. The integer values are in @code{QImode}, @code{HImode}, +@code{SImode}, @code{DImode}, @code{TImode}, and @code{OImode}, +respectively. +@end table + +The machine description defines @code{Pmode} as a C macro which expands +into the machine mode used for addresses. Normally this is the mode +whose size is @code{BITS_PER_WORD}, @code{SImode} on 32-bit machines. + +The only modes which a machine description @i{must} support are +@code{QImode}, and the modes corresponding to @code{BITS_PER_WORD}, +@code{FLOAT_TYPE_SIZE} and @code{DOUBLE_TYPE_SIZE}. +The compiler will attempt to use @code{DImode} for 8-byte structures and +unions, but this can be prevented by overriding the definition of +@code{MAX_FIXED_MODE_SIZE}. Alternatively, you can have the compiler +use @code{TImode} for 16-byte structures and unions. Likewise, you can +arrange for the C type @code{short int} to avoid using @code{HImode}. + +@cindex mode classes +Very few explicit references to machine modes remain in the compiler and +these few references will soon be removed. Instead, the machine modes +are divided into mode classes. These are represented by the enumeration +type @code{enum mode_class} defined in @file{machmode.h}. The possible +mode classes are: + +@table @code +@findex MODE_INT +@item MODE_INT +Integer modes. By default these are @code{QImode}, @code{HImode}, +@code{SImode}, @code{DImode}, and @code{TImode}. + +@findex MODE_PARTIAL_INT +@item MODE_PARTIAL_INT +The ``partial integer'' modes, @code{PSImode} and @code{PDImode}. + +@findex MODE_FLOAT +@item MODE_FLOAT +floating point modes. By default these are @code{SFmode}, @code{DFmode}, +@code{XFmode} and @code{TFmode}. + +@findex MODE_COMPLEX_INT +@item MODE_COMPLEX_INT +Complex integer modes. (These are not currently implemented). + +@findex MODE_COMPLEX_FLOAT +@item MODE_COMPLEX_FLOAT +Complex floating point modes. By default these are @code{SCmode}, +@code{DCmode}, @code{XCmode}, and @code{TCmode}. + +@findex MODE_FUNCTION +@item MODE_FUNCTION +Algol or Pascal function variables including a static chain. +(These are not currently implemented). + +@findex MODE_CC +@item MODE_CC +Modes representing condition code values. These are @code{CCmode} plus +any modes listed in the @code{EXTRA_CC_MODES} macro. @xref{Jump Patterns}, +also see @ref{Condition Code}. + +@findex MODE_RANDOM +@item MODE_RANDOM +This is a catchall mode class for modes which don't fit into the above +classes. Currently @code{VOIDmode} and @code{BLKmode} are in +@code{MODE_RANDOM}. +@end table + +Here are some C macros that relate to machine modes: + +@table @code +@findex GET_MODE +@item GET_MODE (@var{x}) +Returns the machine mode of the RTX @var{x}. + +@findex PUT_MODE +@item PUT_MODE (@var{x}, @var{newmode}) +Alters the machine mode of the RTX @var{x} to be @var{newmode}. + +@findex NUM_MACHINE_MODES +@item NUM_MACHINE_MODES +Stands for the number of machine modes available on the target +machine. This is one greater than the largest numeric value of any +machine mode. + +@findex GET_MODE_NAME +@item GET_MODE_NAME (@var{m}) +Returns the name of mode @var{m} as a string. + +@findex GET_MODE_CLASS +@item GET_MODE_CLASS (@var{m}) +Returns the mode class of mode @var{m}. + +@findex GET_MODE_WIDER_MODE +@item GET_MODE_WIDER_MODE (@var{m}) +Returns the next wider natural mode. For example, the expression +@code{GET_MODE_WIDER_MODE (QImode)} returns @code{HImode}. + +@findex GET_MODE_SIZE +@item GET_MODE_SIZE (@var{m}) +Returns the size in bytes of a datum of mode @var{m}. + +@findex GET_MODE_BITSIZE +@item GET_MODE_BITSIZE (@var{m}) +Returns the size in bits of a datum of mode @var{m}. + +@findex GET_MODE_MASK +@item GET_MODE_MASK (@var{m}) +Returns a bitmask containing 1 for all bits in a word that fit within +mode @var{m}. This macro can only be used for modes whose bitsize is +less than or equal to @code{HOST_BITS_PER_INT}. + +@findex GET_MODE_ALIGNMENT +@item GET_MODE_ALIGNMENT (@var{m)}) +Return the required alignment, in bits, for an object of mode @var{m}. + +@findex GET_MODE_UNIT_SIZE +@item GET_MODE_UNIT_SIZE (@var{m}) +Returns the size in bytes of the subunits of a datum of mode @var{m}. +This is the same as @code{GET_MODE_SIZE} except in the case of complex +modes. For them, the unit size is the size of the real or imaginary +part. + +@findex GET_MODE_NUNITS +@item GET_MODE_NUNITS (@var{m}) +Returns the number of units contained in a mode, i.e., +@code{GET_MODE_SIZE} divided by @code{GET_MODE_UNIT_SIZE}. + +@findex GET_CLASS_NARROWEST_MODE +@item GET_CLASS_NARROWEST_MODE (@var{c}) +Returns the narrowest mode in mode class @var{c}. +@end table + +@findex byte_mode +@findex word_mode +The global variables @code{byte_mode} and @code{word_mode} contain modes +whose classes are @code{MODE_INT} and whose bitsizes are either +@code{BITS_PER_UNIT} or @code{BITS_PER_WORD}, respectively. On 32-bit +machines, these are @code{QImode} and @code{SImode}, respectively. + +@node Constants, Regs and Memory, Machine Modes, RTL +@section Constant Expression Types +@cindex RTL constants +@cindex RTL constant expression types + +The simplest RTL expressions are those that represent constant values. + +@table @code +@findex const_int +@item (const_int @var{i}) +This type of expression represents the integer value @var{i}. @var{i} +is customarily accessed with the macro @code{INTVAL} as in +@code{INTVAL (@var{exp})}, which is equivalent to @code{XWINT (@var{exp}, 0)}. + +@findex const0_rtx +@findex const1_rtx +@findex const2_rtx +@findex constm1_rtx +There is only one expression object for the integer value zero; it is +the value of the variable @code{const0_rtx}. Likewise, the only +expression for integer value one is found in @code{const1_rtx}, the only +expression for integer value two is found in @code{const2_rtx}, and the +only expression for integer value negative one is found in +@code{constm1_rtx}. Any attempt to create an expression of code +@code{const_int} and value zero, one, two or negative one will return +@code{const0_rtx}, @code{const1_rtx}, @code{const2_rtx} or +@code{constm1_rtx} as appropriate.@refill + +@findex const_true_rtx +Similarly, there is only one object for the integer whose value is +@code{STORE_FLAG_VALUE}. It is found in @code{const_true_rtx}. If +@code{STORE_FLAG_VALUE} is one, @code{const_true_rtx} and +@code{const1_rtx} will point to the same object. If +@code{STORE_FLAG_VALUE} is -1, @code{const_true_rtx} and +@code{constm1_rtx} will point to the same object.@refill + +@findex const_double +@item (const_double:@var{m} @var{addr} @var{i0} @var{i1} @dots{}) +Represents either a floating-point constant of mode @var{m} or an +integer constant too large to fit into @code{HOST_BITS_PER_WIDE_INT} +bits but small enough to fit within twice that number of bits (GNU CC +does not provide a mechanism to represent even larger constants). In +the latter case, @var{m} will be @code{VOIDmode}. + +@findex CONST_DOUBLE_MEM +@findex CONST_DOUBLE_CHAIN +@var{addr} is used to contain the @code{mem} expression that corresponds +to the location in memory that at which the constant can be found. If +it has not been allocated a memory location, but is on the chain of all +@code{const_double} expressions in this compilation (maintained using an +undisplayed field), @var{addr} contains @code{const0_rtx}. If it is not +on the chain, @var{addr} contains @code{cc0_rtx}. @var{addr} is +customarily accessed with the macro @code{CONST_DOUBLE_MEM} and the +chain field via @code{CONST_DOUBLE_CHAIN}.@refill + +@findex CONST_DOUBLE_LOW +If @var{m} is @code{VOIDmode}, the bits of the value are stored in +@var{i0} and @var{i1}. @var{i0} is customarily accessed with the macro +@code{CONST_DOUBLE_LOW} and @var{i1} with @code{CONST_DOUBLE_HIGH}. + +If the constant is floating point (regardless of its precision), then +the number of integers used to store the value depends on the size of +@code{REAL_VALUE_TYPE} (@pxref{Cross-compilation}). The integers +represent a floating point number, but not precisely in the target +machine's or host machine's floating point format. To convert them to +the precise bit pattern used by the target machine, use the macro +@code{REAL_VALUE_TO_TARGET_DOUBLE} and friends (@pxref{Data Output}). + +@findex CONST0_RTX +@findex CONST1_RTX +@findex CONST2_RTX +The macro @code{CONST0_RTX (@var{mode})} refers to an expression with +value 0 in mode @var{mode}. If mode @var{mode} is of mode class +@code{MODE_INT}, it returns @code{const0_rtx}. Otherwise, it returns a +@code{CONST_DOUBLE} expression in mode @var{mode}. Similarly, the macro +@code{CONST1_RTX (@var{mode})} refers to an expression with value 1 in +mode @var{mode} and similarly for @code{CONST2_RTX}. + +@findex const_string +@item (const_string @var{str}) +Represents a constant string with value @var{str}. Currently this is +used only for insn attributes (@pxref{Insn Attributes}) since constant +strings in C are placed in memory. + +@findex symbol_ref +@item (symbol_ref:@var{mode} @var{symbol}) +Represents the value of an assembler label for data. @var{symbol} is +a string that describes the name of the assembler label. If it starts +with a @samp{*}, the label is the rest of @var{symbol} not including +the @samp{*}. Otherwise, the label is @var{symbol}, usually prefixed +with @samp{_}. + +The @code{symbol_ref} contains a mode, which is usually @code{Pmode}. +Usually that is the only mode for which a symbol is directly valid. + +@findex label_ref +@item (label_ref @var{label}) +Represents the value of an assembler label for code. It contains one +operand, an expression, which must be a @code{code_label} that appears +in the instruction sequence to identify the place where the label +should go. + +The reason for using a distinct expression type for code label +references is so that jump optimization can distinguish them. + +@item (const:@var{m} @var{exp}) +Represents a constant that is the result of an assembly-time +arithmetic computation. The operand, @var{exp}, is an expression that +contains only constants (@code{const_int}, @code{symbol_ref} and +@code{label_ref} expressions) combined with @code{plus} and +@code{minus}. However, not all combinations are valid, since the +assembler cannot do arbitrary arithmetic on relocatable symbols. + +@var{m} should be @code{Pmode}. + +@findex high +@item (high:@var{m} @var{exp}) +Represents the high-order bits of @var{exp}, usually a +@code{symbol_ref}. The number of bits is machine-dependent and is +normally the number of bits specified in an instruction that initializes +the high order bits of a register. It is used with @code{lo_sum} to +represent the typical two-instruction sequence used in RISC machines to +reference a global memory location. + +@var{m} should be @code{Pmode}. +@end table + +@node Regs and Memory, Arithmetic, Constants, RTL +@section Registers and Memory +@cindex RTL register expressions +@cindex RTL memory expressions + +Here are the RTL expression types for describing access to machine +registers and to main memory. + +@table @code +@findex reg +@cindex hard registers +@cindex pseudo registers +@item (reg:@var{m} @var{n}) +For small values of the integer @var{n} (those that are less than +@code{FIRST_PSEUDO_REGISTER}), this stands for a reference to machine +register number @var{n}: a @dfn{hard register}. For larger values of +@var{n}, it stands for a temporary value or @dfn{pseudo register}. +The compiler's strategy is to generate code assuming an unlimited +number of such pseudo registers, and later convert them into hard +registers or into memory references. + +@var{m} is the machine mode of the reference. It is necessary because +machines can generally refer to each register in more than one mode. +For example, a register may contain a full word but there may be +instructions to refer to it as a half word or as a single byte, as +well as instructions to refer to it as a floating point number of +various precisions. + +Even for a register that the machine can access in only one mode, +the mode must always be specified. + +The symbol @code{FIRST_PSEUDO_REGISTER} is defined by the machine +description, since the number of hard registers on the machine is an +invariant characteristic of the machine. Note, however, that not +all of the machine registers must be general registers. All the +machine registers that can be used for storage of data are given +hard register numbers, even those that can be used only in certain +instructions or can hold only certain types of data. + +A hard register may be accessed in various modes throughout one +function, but each pseudo register is given a natural mode +and is accessed only in that mode. When it is necessary to describe +an access to a pseudo register using a nonnatural mode, a @code{subreg} +expression is used. + +A @code{reg} expression with a machine mode that specifies more than +one word of data may actually stand for several consecutive registers. +If in addition the register number specifies a hardware register, then +it actually represents several consecutive hardware registers starting +with the specified one. + +Each pseudo register number used in a function's RTL code is +represented by a unique @code{reg} expression. + +@findex FIRST_VIRTUAL_REGISTER +@findex LAST_VIRTUAL_REGISTER +Some pseudo register numbers, those within the range of +@code{FIRST_VIRTUAL_REGISTER} to @code{LAST_VIRTUAL_REGISTER} only +appear during the RTL generation phase and are eliminated before the +optimization phases. These represent locations in the stack frame that +cannot be determined until RTL generation for the function has been +completed. The following virtual register numbers are defined: + +@table @code +@findex VIRTUAL_INCOMING_ARGS_REGNUM +@item VIRTUAL_INCOMING_ARGS_REGNUM +This points to the first word of the incoming arguments passed on the +stack. Normally these arguments are placed there by the caller, but the +callee may have pushed some arguments that were previously passed in +registers. + +@cindex @code{FIRST_PARM_OFFSET} and virtual registers +@cindex @code{ARG_POINTER_REGNUM} and virtual registers +When RTL generation is complete, this virtual register is replaced +by the sum of the register given by @code{ARG_POINTER_REGNUM} and the +value of @code{FIRST_PARM_OFFSET}. + +@findex VIRTUAL_STACK_VARS_REGNUM +@cindex @code{FRAME_GROWS_DOWNWARD} and virtual registers +@item VIRTUAL_STACK_VARS_REGNUM +If @code{FRAME_GROWS_DOWNWARD} is defined, this points to immediately +above the first variable on the stack. Otherwise, it points to the +first variable on the stack. + +@cindex @code{STARTING_FRAME_OFFSET} and virtual registers +@cindex @code{FRAME_POINTER_REGNUM} and virtual registers +@code{VIRTUAL_STACK_VARS_REGNUM} is replaced with the sum of the +register given by @code{FRAME_POINTER_REGNUM} and the value +@code{STARTING_FRAME_OFFSET}. + +@findex VIRTUAL_STACK_DYNAMIC_REGNUM +@item VIRTUAL_STACK_DYNAMIC_REGNUM +This points to the location of dynamically allocated memory on the stack +immediately after the stack pointer has been adjusted by the amount of +memory desired. + +@cindex @code{STACK_DYNAMIC_OFFSET} and virtual registers +@cindex @code{STACK_POINTER_REGNUM} and virtual registers +This virtual register is replaced by the sum of the register given by +@code{STACK_POINTER_REGNUM} and the value @code{STACK_DYNAMIC_OFFSET}. + +@findex VIRTUAL_OUTGOING_ARGS_REGNUM +@item VIRTUAL_OUTGOING_ARGS_REGNUM +This points to the location in the stack at which outgoing arguments +should be written when the stack is pre-pushed (arguments pushed using +push insns should always use @code{STACK_POINTER_REGNUM}). + +@cindex @code{STACK_POINTER_OFFSET} and virtual registers +This virtual register is replaced by the sum of the register given by +@code{STACK_POINTER_REGNUM} and the value @code{STACK_POINTER_OFFSET}. +@end table + +@findex subreg +@item (subreg:@var{m} @var{reg} @var{wordnum}) +@code{subreg} expressions are used to refer to a register in a machine +mode other than its natural one, or to refer to one register of +a multi-word @code{reg} that actually refers to several registers. + +Each pseudo-register has a natural mode. If it is necessary to +operate on it in a different mode---for example, to perform a fullword +move instruction on a pseudo-register that contains a single +byte---the pseudo-register must be enclosed in a @code{subreg}. In +such a case, @var{wordnum} is zero. + +Usually @var{m} is at least as narrow as the mode of @var{reg}, in which +case it is restricting consideration to only the bits of @var{reg} that +are in @var{m}. + +Sometimes @var{m} is wider than the mode of @var{reg}. These +@code{subreg} expressions are often called @dfn{paradoxical}. They are +used in cases where we want to refer to an object in a wider mode but do +not care what value the additional bits have. The reload pass ensures +that paradoxical references are only made to hard registers. + +The other use of @code{subreg} is to extract the individual registers of +a multi-register value. Machine modes such as @code{DImode} and +@code{TImode} can indicate values longer than a word, values which +usually require two or more consecutive registers. To access one of the +registers, use a @code{subreg} with mode @code{SImode} and a +@var{wordnum} that says which register. + +Storing in a non-paradoxical @code{subreg} has undefined results for +bits belonging to the same word as the @code{subreg}. This laxity makes +it easier to generate efficient code for such instructions. To +represent an instruction that preserves all the bits outside of those in +the @code{subreg}, use @code{strict_low_part} around the @code{subreg}. + +@cindex @code{WORDS_BIG_ENDIAN}, effect on @code{subreg} +The compilation parameter @code{WORDS_BIG_ENDIAN}, if set to 1, says +that word number zero is the most significant part; otherwise, it is +the least significant part. + +@cindex combiner pass +@cindex reload pass +@cindex @code{subreg}, special reload handling +Between the combiner pass and the reload pass, it is possible to have a +paradoxical @code{subreg} which contains a @code{mem} instead of a +@code{reg} as its first operand. After the reload pass, it is also +possible to have a non-paradoxical @code{subreg} which contains a +@code{mem}; this usually occurs when the @code{mem} is a stack slot +which replaced a pseudo register. + +Note that it is not valid to access a @code{DFmode} value in @code{SFmode} +using a @code{subreg}. On some machines the most significant part of a +@code{DFmode} value does not have the same format as a single-precision +floating value. + +It is also not valid to access a single word of a multi-word value in a +hard register when less registers can hold the value than would be +expected from its size. For example, some 32-bit machines have +floating-point registers that can hold an entire @code{DFmode} value. +If register 10 were such a register @code{(subreg:SI (reg:DF 10) 1)} +would be invalid because there is no way to convert that reference to +a single machine register. The reload pass prevents @code{subreg} +expressions such as these from being formed. + +@findex SUBREG_REG +@findex SUBREG_WORD +The first operand of a @code{subreg} expression is customarily accessed +with the @code{SUBREG_REG} macro and the second operand is customarily +accessed with the @code{SUBREG_WORD} macro. + +@findex scratch +@cindex scratch operands +@item (scratch:@var{m}) +This represents a scratch register that will be required for the +execution of a single instruction and not used subsequently. It is +converted into a @code{reg} by either the local register allocator or +the reload pass. + +@code{scratch} is usually present inside a @code{clobber} operation +(@pxref{Side Effects}). + +@findex cc0 +@cindex condition code register +@item (cc0) +This refers to the machine's condition code register. It has no +operands and may not have a machine mode. There are two ways to use it: + +@itemize @bullet +@item +To stand for a complete set of condition code flags. This is best on +most machines, where each comparison sets the entire series of flags. + +With this technique, @code{(cc0)} may be validly used in only two +contexts: as the destination of an assignment (in test and compare +instructions) and in comparison operators comparing against zero +(@code{const_int} with value zero; that is to say, @code{const0_rtx}). + +@item +To stand for a single flag that is the result of a single condition. +This is useful on machines that have only a single flag bit, and in +which comparison instructions must specify the condition to test. + +With this technique, @code{(cc0)} may be validly used in only two +contexts: as the destination of an assignment (in test and compare +instructions) where the source is a comparison operator, and as the +first operand of @code{if_then_else} (in a conditional branch). +@end itemize + +@findex cc0_rtx +There is only one expression object of code @code{cc0}; it is the +value of the variable @code{cc0_rtx}. Any attempt to create an +expression of code @code{cc0} will return @code{cc0_rtx}. + +Instructions can set the condition code implicitly. On many machines, +nearly all instructions set the condition code based on the value that +they compute or store. It is not necessary to record these actions +explicitly in the RTL because the machine description includes a +prescription for recognizing the instructions that do so (by means of +the macro @code{NOTICE_UPDATE_CC}). @xref{Condition Code}. Only +instructions whose sole purpose is to set the condition code, and +instructions that use the condition code, need mention @code{(cc0)}. + +On some machines, the condition code register is given a register number +and a @code{reg} is used instead of @code{(cc0)}. This is usually the +preferable approach if only a small subset of instructions modify the +condition code. Other machines store condition codes in general +registers; in such cases a pseudo register should be used. + +Some machines, such as the Sparc and RS/6000, have two sets of +arithmetic instructions, one that sets and one that does not set the +condition code. This is best handled by normally generating the +instruction that does not set the condition code, and making a pattern +that both performs the arithmetic and sets the condition code register +(which would not be @code{(cc0)} in this case). For examples, search +for @samp{addcc} and @samp{andcc} in @file{sparc.md}. + +@findex pc +@item (pc) +@cindex program counter +This represents the machine's program counter. It has no operands and +may not have a machine mode. @code{(pc)} may be validly used only in +certain specific contexts in jump instructions. + +@findex pc_rtx +There is only one expression object of code @code{pc}; it is the value +of the variable @code{pc_rtx}. Any attempt to create an expression of +code @code{pc} will return @code{pc_rtx}. + +All instructions that do not jump alter the program counter implicitly +by incrementing it, but there is no need to mention this in the RTL. + +@findex mem +@item (mem:@var{m} @var{addr}) +This RTX represents a reference to main memory at an address +represented by the expression @var{addr}. @var{m} specifies how large +a unit of memory is accessed. +@end table + +@node Arithmetic, Comparisons, Regs and Memory, RTL +@section RTL Expressions for Arithmetic +@cindex arithmetic, in RTL +@cindex math, in RTL +@cindex RTL expressions for arithmetic + +Unless otherwise specified, all the operands of arithmetic expressions +must be valid for mode @var{m}. An operand is valid for mode @var{m} +if it has mode @var{m}, or if it is a @code{const_int} or +@code{const_double} and @var{m} is a mode of class @code{MODE_INT}. + +For commutative binary operations, constants should be placed in the +second operand. + +@table @code +@findex plus +@cindex RTL addition +@cindex RTL sum +@item (plus:@var{m} @var{x} @var{y}) +Represents the sum of the values represented by @var{x} and @var{y} +carried out in machine mode @var{m}. + +@findex lo_sum +@item (lo_sum:@var{m} @var{x} @var{y}) +Like @code{plus}, except that it represents that sum of @var{x} and the +low-order bits of @var{y}. The number of low order bits is +machine-dependent but is normally the number of bits in a @code{Pmode} +item minus the number of bits set by the @code{high} code +(@pxref{Constants}). + +@var{m} should be @code{Pmode}. + +@findex minus +@cindex RTL subtraction +@cindex RTL difference +@item (minus:@var{m} @var{x} @var{y}) +Like @code{plus} but represents subtraction. + +@findex compare +@cindex RTL comparison +@item (compare:@var{m} @var{x} @var{y}) +Represents the result of subtracting @var{y} from @var{x} for purposes +of comparison. The result is computed without overflow, as if with +infinite precision. + +Of course, machines can't really subtract with infinite precision. +However, they can pretend to do so when only the sign of the +result will be used, which is the case when the result is stored +in the condition code. And that is the only way this kind of expression +may validly be used: as a value to be stored in the condition codes. + +The mode @var{m} is not related to the modes of @var{x} and @var{y}, +but instead is the mode of the condition code value. If @code{(cc0)} +is used, it is @code{VOIDmode}. Otherwise it is some mode in class +@code{MODE_CC}, often @code{CCmode}. @xref{Condition Code}. + +Normally, @var{x} and @var{y} must have the same mode. Otherwise, +@code{compare} is valid only if the mode of @var{x} is in class +@code{MODE_INT} and @var{y} is a @code{const_int} or +@code{const_double} with mode @code{VOIDmode}. The mode of @var{x} +determines what mode the comparison is to be done in; thus it must not +be @code{VOIDmode}. + +If one of the operands is a constant, it should be placed in the +second operand and the comparison code adjusted as appropriate. + +A @code{compare} specifying two @code{VOIDmode} constants is not valid +since there is no way to know in what mode the comparison is to be +performed; the comparison must either be folded during the compilation +or the first operand must be loaded into a register while its mode is +still known. + +@findex neg +@item (neg:@var{m} @var{x}) +Represents the negation (subtraction from zero) of the value represented +by @var{x}, carried out in mode @var{m}. + +@findex mult +@cindex multiplication +@cindex product +@item (mult:@var{m} @var{x} @var{y}) +Represents the signed product of the values represented by @var{x} and +@var{y} carried out in machine mode @var{m}. + +Some machines support a multiplication that generates a product wider +than the operands. Write the pattern for this as + +@example +(mult:@var{m} (sign_extend:@var{m} @var{x}) (sign_extend:@var{m} @var{y})) +@end example + +where @var{m} is wider than the modes of @var{x} and @var{y}, which need +not be the same. + +Write patterns for unsigned widening multiplication similarly using +@code{zero_extend}. + +@findex div +@cindex division +@cindex signed division +@cindex quotient +@item (div:@var{m} @var{x} @var{y}) +Represents the quotient in signed division of @var{x} by @var{y}, +carried out in machine mode @var{m}. If @var{m} is a floating point +mode, it represents the exact quotient; otherwise, the integerized +quotient. + +Some machines have division instructions in which the operands and +quotient widths are not all the same; you should represent +such instructions using @code{truncate} and @code{sign_extend} as in, + +@example +(truncate:@var{m1} (div:@var{m2} @var{x} (sign_extend:@var{m2} @var{y}))) +@end example + +@findex udiv +@cindex unsigned division +@cindex division +@item (udiv:@var{m} @var{x} @var{y}) +Like @code{div} but represents unsigned division. + +@findex mod +@findex umod +@cindex remainder +@cindex division +@item (mod:@var{m} @var{x} @var{y}) +@itemx (umod:@var{m} @var{x} @var{y}) +Like @code{div} and @code{udiv} but represent the remainder instead of +the quotient. + +@findex smin +@findex smax +@cindex signed minimum +@cindex signed maximum +@item (smin:@var{m} @var{x} @var{y}) +@itemx (smax:@var{m} @var{x} @var{y}) +Represents the smaller (for @code{smin}) or larger (for @code{smax}) of +@var{x} and @var{y}, interpreted as signed integers in mode @var{m}. + +@findex umin +@findex umax +@cindex unsigned minimum and maximum +@item (umin:@var{m} @var{x} @var{y}) +@itemx (umax:@var{m} @var{x} @var{y}) +Like @code{smin} and @code{smax}, but the values are interpreted as unsigned +integers. + +@findex not +@cindex complement, bitwise +@cindex bitwise complement +@item (not:@var{m} @var{x}) +Represents the bitwise complement of the value represented by @var{x}, +carried out in mode @var{m}, which must be a fixed-point machine mode. + +@findex and +@cindex logical-and, bitwise +@cindex bitwise logical-and +@item (and:@var{m} @var{x} @var{y}) +Represents the bitwise logical-and of the values represented by +@var{x} and @var{y}, carried out in machine mode @var{m}, which must be +a fixed-point machine mode. + +@findex ior +@cindex inclusive-or, bitwise +@cindex bitwise inclusive-or +@item (ior:@var{m} @var{x} @var{y}) +Represents the bitwise inclusive-or of the values represented by @var{x} +and @var{y}, carried out in machine mode @var{m}, which must be a +fixed-point mode. + +@findex xor +@cindex exclusive-or, bitwise +@cindex bitwise exclusive-or +@item (xor:@var{m} @var{x} @var{y}) +Represents the bitwise exclusive-or of the values represented by @var{x} +and @var{y}, carried out in machine mode @var{m}, which must be a +fixed-point mode. + +@findex ashift +@cindex left shift +@cindex shift +@cindex arithmetic shift +@item (ashift:@var{m} @var{x} @var{c}) +Represents the result of arithmetically shifting @var{x} left by @var{c} +places. @var{x} have mode @var{m}, a fixed-point machine mode. @var{c} +be a fixed-point mode or be a constant with mode @code{VOIDmode}; which +mode is determined by the mode called for in the machine description +entry for the left-shift instruction. For example, on the Vax, the mode +of @var{c} is @code{QImode} regardless of @var{m}. + +@findex lshiftrt +@cindex right shift +@findex ashiftrt +@item (lshiftrt:@var{m} @var{x} @var{c}) +@itemx (ashiftrt:@var{m} @var{x} @var{c}) +Like @code{ashift} but for right shift. Unlike the case for left shift, +these two operations are distinct. + +@findex rotate +@cindex rotate +@cindex left rotate +@findex rotatert +@cindex right rotate +@item (rotate:@var{m} @var{x} @var{c}) +@itemx (rotatert:@var{m} @var{x} @var{c}) +Similar but represent left and right rotate. If @var{c} is a constant, +use @code{rotate}. + +@findex abs +@cindex absolute value +@item (abs:@var{m} @var{x}) +Represents the absolute value of @var{x}, computed in mode @var{m}. + +@findex sqrt +@cindex square root +@item (sqrt:@var{m} @var{x}) +Represents the square root of @var{x}, computed in mode @var{m}. +Most often @var{m} will be a floating point mode. + +@findex ffs +@item (ffs:@var{m} @var{x}) +Represents one plus the index of the least significant 1-bit in +@var{x}, represented as an integer of mode @var{m}. (The value is +zero if @var{x} is zero.) The mode of @var{x} need not be @var{m}; +depending on the target machine, various mode combinations may be +valid. +@end table + +@node Comparisons, Bit Fields, Arithmetic, RTL +@section Comparison Operations +@cindex RTL comparison operations + +Comparison operators test a relation on two operands and are considered +to represent a machine-dependent nonzero value described by, but not +necessarily equal to, @code{STORE_FLAG_VALUE} (@pxref{Misc}) +if the relation holds, or zero if it does not. The mode of the +comparison operation is independent of the mode of the data being +compared. If the comparison operation is being tested (e.g., the first +operand of an @code{if_then_else}), the mode must be @code{VOIDmode}. +If the comparison operation is producing data to be stored in some +variable, the mode must be in class @code{MODE_INT}. All comparison +operations producing data must use the same mode, which is +machine-specific. + +@cindex condition codes +There are two ways that comparison operations may be used. The +comparison operators may be used to compare the condition codes +@code{(cc0)} against zero, as in @code{(eq (cc0) (const_int 0))}. Such +a construct actually refers to the result of the preceding instruction +in which the condition codes were set. The instructing setting the +condition code must be adjacent to the instruction using the condition +code; only @code{note} insns may separate them. + +Alternatively, a comparison operation may directly compare two data +objects. The mode of the comparison is determined by the operands; they +must both be valid for a common machine mode. A comparison with both +operands constant would be invalid as the machine mode could not be +deduced from it, but such a comparison should never exist in RTL due to +constant folding. + +In the example above, if @code{(cc0)} were last set to +@code{(compare @var{x} @var{y})}, the comparison operation is +identical to @code{(eq @var{x} @var{y})}. Usually only one style +of comparisons is supported on a particular machine, but the combine +pass will try to merge the operations to produce the @code{eq} shown +in case it exists in the context of the particular insn involved. + +Inequality comparisons come in two flavors, signed and unsigned. Thus, +there are distinct expression codes @code{gt} and @code{gtu} for signed and +unsigned greater-than. These can produce different results for the same +pair of integer values: for example, 1 is signed greater-than -1 but not +unsigned greater-than, because -1 when regarded as unsigned is actually +@code{0xffffffff} which is greater than 1. + +The signed comparisons are also used for floating point values. Floating +point comparisons are distinguished by the machine modes of the operands. + +@table @code +@findex eq +@cindex equal +@item (eq:@var{m} @var{x} @var{y}) +1 if the values represented by @var{x} and @var{y} are equal, +otherwise 0. + +@findex ne +@cindex not equal +@item (ne:@var{m} @var{x} @var{y}) +1 if the values represented by @var{x} and @var{y} are not equal, +otherwise 0. + +@findex gt +@cindex greater than +@item (gt:@var{m} @var{x} @var{y}) +1 if the @var{x} is greater than @var{y}. If they are fixed-point, +the comparison is done in a signed sense. + +@findex gtu +@cindex greater than +@cindex unsigned greater than +@item (gtu:@var{m} @var{x} @var{y}) +Like @code{gt} but does unsigned comparison, on fixed-point numbers only. + +@findex lt +@cindex less than +@findex ltu +@cindex unsigned less than +@item (lt:@var{m} @var{x} @var{y}) +@itemx (ltu:@var{m} @var{x} @var{y}) +Like @code{gt} and @code{gtu} but test for ``less than''. + +@findex ge +@cindex greater than +@findex geu +@cindex unsigned greater than +@item (ge:@var{m} @var{x} @var{y}) +@itemx (geu:@var{m} @var{x} @var{y}) +Like @code{gt} and @code{gtu} but test for ``greater than or equal''. + +@findex le +@cindex less than or equal +@findex leu +@cindex unsigned less than +@item (le:@var{m} @var{x} @var{y}) +@itemx (leu:@var{m} @var{x} @var{y}) +Like @code{gt} and @code{gtu} but test for ``less than or equal''. + +@findex if_then_else +@item (if_then_else @var{cond} @var{then} @var{else}) +This is not a comparison operation but is listed here because it is +always used in conjunction with a comparison operation. To be +precise, @var{cond} is a comparison expression. This expression +represents a choice, according to @var{cond}, between the value +represented by @var{then} and the one represented by @var{else}. + +On most machines, @code{if_then_else} expressions are valid only +to express conditional jumps. + +@findex cond +@item (cond [@var{test1} @var{value1} @var{test2} @var{value2} @dots{}] @var{default}) +Similar to @code{if_then_else}, but more general. Each of @var{test1}, +@var{test2}, @dots{} is performed in turn. The result of this expression is +the @var{value} corresponding to the first non-zero test, or @var{default} if +none of the tests are non-zero expressions. + +This is currently not valid for instruction patterns and is supported only +for insn attributes. @xref{Insn Attributes}. +@end table + +@node Bit Fields, Conversions, Comparisons, RTL +@section Bit Fields +@cindex bit fields + +Special expression codes exist to represent bitfield instructions. +These types of expressions are lvalues in RTL; they may appear +on the left side of an assignment, indicating insertion of a value +into the specified bit field. + +@table @code +@findex sign_extract +@cindex @code{BITS_BIG_ENDIAN}, effect on @code{sign_extract} +@item (sign_extract:@var{m} @var{loc} @var{size} @var{pos}) +This represents a reference to a sign-extended bit field contained or +starting in @var{loc} (a memory or register reference). The bit field +is @var{size} bits wide and starts at bit @var{pos}. The compilation +option @code{BITS_BIG_ENDIAN} says which end of the memory unit +@var{pos} counts from. + +If @var{loc} is in memory, its mode must be a single-byte integer mode. +If @var{loc} is in a register, the mode to use is specified by the +operand of the @code{insv} or @code{extv} pattern +(@pxref{Standard Names}) and is usually a full-word integer mode. + +The mode of @var{pos} is machine-specific and is also specified +in the @code{insv} or @code{extv} pattern. + +The mode @var{m} is the same as the mode that would be used for +@var{loc} if it were a register. + +@findex zero_extract +@item (zero_extract:@var{m} @var{loc} @var{size} @var{pos}) +Like @code{sign_extract} but refers to an unsigned or zero-extended +bit field. The same sequence of bits are extracted, but they +are filled to an entire word with zeros instead of by sign-extension. +@end table + +@node Conversions, RTL Declarations, Bit Fields, RTL +@section Conversions +@cindex conversions +@cindex machine mode conversions + +All conversions between machine modes must be represented by +explicit conversion operations. For example, an expression +which is the sum of a byte and a full word cannot be written as +@code{(plus:SI (reg:QI 34) (reg:SI 80))} because the @code{plus} +operation requires two operands of the same machine mode. +Therefore, the byte-sized operand is enclosed in a conversion +operation, as in + +@example +(plus:SI (sign_extend:SI (reg:QI 34)) (reg:SI 80)) +@end example + +The conversion operation is not a mere placeholder, because there +may be more than one way of converting from a given starting mode +to the desired final mode. The conversion operation code says how +to do it. + +For all conversion operations, @var{x} must not be @code{VOIDmode} +because the mode in which to do the conversion would not be known. +The conversion must either be done at compile-time or @var{x} +must be placed into a register. + +@table @code +@findex sign_extend +@item (sign_extend:@var{m} @var{x}) +Represents the result of sign-extending the value @var{x} +to machine mode @var{m}. @var{m} must be a fixed-point mode +and @var{x} a fixed-point value of a mode narrower than @var{m}. + +@findex zero_extend +@item (zero_extend:@var{m} @var{x}) +Represents the result of zero-extending the value @var{x} +to machine mode @var{m}. @var{m} must be a fixed-point mode +and @var{x} a fixed-point value of a mode narrower than @var{m}. + +@findex float_extend +@item (float_extend:@var{m} @var{x}) +Represents the result of extending the value @var{x} +to machine mode @var{m}. @var{m} must be a floating point mode +and @var{x} a floating point value of a mode narrower than @var{m}. + +@findex truncate +@item (truncate:@var{m} @var{x}) +Represents the result of truncating the value @var{x} +to machine mode @var{m}. @var{m} must be a fixed-point mode +and @var{x} a fixed-point value of a mode wider than @var{m}. + +@findex float_truncate +@item (float_truncate:@var{m} @var{x}) +Represents the result of truncating the value @var{x} +to machine mode @var{m}. @var{m} must be a floating point mode +and @var{x} a floating point value of a mode wider than @var{m}. + +@findex float +@item (float:@var{m} @var{x}) +Represents the result of converting fixed point value @var{x}, +regarded as signed, to floating point mode @var{m}. + +@findex unsigned_float +@item (unsigned_float:@var{m} @var{x}) +Represents the result of converting fixed point value @var{x}, +regarded as unsigned, to floating point mode @var{m}. + +@findex fix +@item (fix:@var{m} @var{x}) +When @var{m} is a fixed point mode, represents the result of +converting floating point value @var{x} to mode @var{m}, regarded as +signed. How rounding is done is not specified, so this operation may +be used validly in compiling C code only for integer-valued operands. + +@findex unsigned_fix +@item (unsigned_fix:@var{m} @var{x}) +Represents the result of converting floating point value @var{x} to +fixed point mode @var{m}, regarded as unsigned. How rounding is done +is not specified. + +@findex fix +@item (fix:@var{m} @var{x}) +When @var{m} is a floating point mode, represents the result of +converting floating point value @var{x} (valid for mode @var{m}) to an +integer, still represented in floating point mode @var{m}, by rounding +towards zero. +@end table + +@node RTL Declarations, Side Effects, Conversions, RTL +@section Declarations +@cindex RTL declarations +@cindex declarations, RTL + +Declaration expression codes do not represent arithmetic operations +but rather state assertions about their operands. + +@table @code +@findex strict_low_part +@cindex @code{subreg}, in @code{strict_low_part} +@item (strict_low_part (subreg:@var{m} (reg:@var{n} @var{r}) 0)) +This expression code is used in only one context: as the destination operand of a +@code{set} expression. In addition, the operand of this expression +must be a non-paradoxical @code{subreg} expression. + +The presence of @code{strict_low_part} says that the part of the +register which is meaningful in mode @var{n}, but is not part of +mode @var{m}, is not to be altered. Normally, an assignment to such +a subreg is allowed to have undefined effects on the rest of the +register when @var{m} is less than a word. +@end table + +@node Side Effects, Incdec, RTL Declarations, RTL +@section Side Effect Expressions +@cindex RTL side effect expressions + +The expression codes described so far represent values, not actions. +But machine instructions never produce values; they are meaningful +only for their side effects on the state of the machine. Special +expression codes are used to represent side effects. + +The body of an instruction is always one of these side effect codes; +the codes described above, which represent values, appear only as +the operands of these. + +@table @code +@findex set +@item (set @var{lval} @var{x}) +Represents the action of storing the value of @var{x} into the place +represented by @var{lval}. @var{lval} must be an expression +representing a place that can be stored in: @code{reg} (or +@code{subreg} or @code{strict_low_part}), @code{mem}, @code{pc} or +@code{cc0}.@refill + +If @var{lval} is a @code{reg}, @code{subreg} or @code{mem}, it has a +machine mode; then @var{x} must be valid for that mode.@refill + +If @var{lval} is a @code{reg} whose machine mode is less than the full +width of the register, then it means that the part of the register +specified by the machine mode is given the specified value and the +rest of the register receives an undefined value. Likewise, if +@var{lval} is a @code{subreg} whose machine mode is narrower than +the mode of the register, the rest of the register can be changed in +an undefined way. + +If @var{lval} is a @code{strict_low_part} of a @code{subreg}, then the +part of the register specified by the machine mode of the +@code{subreg} is given the value @var{x} and the rest of the register +is not changed.@refill + +If @var{lval} is @code{(cc0)}, it has no machine mode, and @var{x} may +be either a @code{compare} expression or a value that may have any mode. +The latter case represents a ``test'' instruction. The expression +@code{(set (cc0) (reg:@var{m} @var{n}))} is equivalent to +@code{(set (cc0) (compare (reg:@var{m} @var{n}) (const_int 0)))}. +Use the former expression to save space during the compilation. + +@cindex jump instructions and @code{set} +@cindex @code{if_then_else} usage +If @var{lval} is @code{(pc)}, we have a jump instruction, and the +possibilities for @var{x} are very limited. It may be a +@code{label_ref} expression (unconditional jump). It may be an +@code{if_then_else} (conditional jump), in which case either the +second or the third operand must be @code{(pc)} (for the case which +does not jump) and the other of the two must be a @code{label_ref} +(for the case which does jump). @var{x} may also be a @code{mem} or +@code{(plus:SI (pc) @var{y})}, where @var{y} may be a @code{reg} or a +@code{mem}; these unusual patterns are used to represent jumps through +branch tables.@refill + +If @var{lval} is neither @code{(cc0)} nor @code{(pc)}, the mode of +@var{lval} must not be @code{VOIDmode} and the mode of @var{x} must be +valid for the mode of @var{lval}. + +@findex SET_DEST +@findex SET_SRC +@var{lval} is customarily accessed with the @code{SET_DEST} macro and +@var{x} with the @code{SET_SRC} macro. + +@findex return +@item (return) +As the sole expression in a pattern, represents a return from the +current function, on machines where this can be done with one +instruction, such as Vaxes. On machines where a multi-instruction +``epilogue'' must be executed in order to return from the function, +returning is done by jumping to a label which precedes the epilogue, and +the @code{return} expression code is never used. + +Inside an @code{if_then_else} expression, represents the value to be +placed in @code{pc} to return to the caller. + +Note that an insn pattern of @code{(return)} is logically equivalent to +@code{(set (pc) (return))}, but the latter form is never used. + +@findex call +@item (call @var{function} @var{nargs}) +Represents a function call. @var{function} is a @code{mem} expression +whose address is the address of the function to be called. +@var{nargs} is an expression which can be used for two purposes: on +some machines it represents the number of bytes of stack argument; on +others, it represents the number of argument registers. + +Each machine has a standard machine mode which @var{function} must +have. The machine description defines macro @code{FUNCTION_MODE} to +expand into the requisite mode name. The purpose of this mode is to +specify what kind of addressing is allowed, on machines where the +allowed kinds of addressing depend on the machine mode being +addressed. + +@findex clobber +@item (clobber @var{x}) +Represents the storing or possible storing of an unpredictable, +undescribed value into @var{x}, which must be a @code{reg}, +@code{scratch} or @code{mem} expression. + +One place this is used is in string instructions that store standard +values into particular hard registers. It may not be worth the +trouble to describe the values that are stored, but it is essential to +inform the compiler that the registers will be altered, lest it +attempt to keep data in them across the string instruction. + +If @var{x} is @code{(mem:BLK (const_int 0))}, it means that all memory +locations must be presumed clobbered. + +Note that the machine description classifies certain hard registers as +``call-clobbered''. All function call instructions are assumed by +default to clobber these registers, so there is no need to use +@code{clobber} expressions to indicate this fact. Also, each function +call is assumed to have the potential to alter any memory location, +unless the function is declared @code{const}. + +If the last group of expressions in a @code{parallel} are each a +@code{clobber} expression whose arguments are @code{reg} or +@code{match_scratch} (@pxref{RTL Template}) expressions, the combiner +phase can add the appropriate @code{clobber} expressions to an insn it +has constructed when doing so will cause a pattern to be matched. + +This feature can be used, for example, on a machine that whose multiply +and add instructions don't use an MQ register but which has an +add-accumulate instruction that does clobber the MQ register. Similarly, +a combined instruction might require a temporary register while the +constituent instructions might not. + +When a @code{clobber} expression for a register appears inside a +@code{parallel} with other side effects, the register allocator +guarantees that the register is unoccupied both before and after that +insn. However, the reload phase may allocate a register used for one of +the inputs unless the @samp{&} constraint is specified for the selected +alternative (@pxref{Modifiers}). You can clobber either a specific hard +register, a pseudo register, or a @code{scratch} expression; in the +latter two cases, GNU CC will allocate a hard register that is available +there for use as a temporary. + +For instructions that require a temporary register, you should use +@code{scratch} instead of a pseudo-register because this will allow the +combiner phase to add the @code{clobber} when required. You do this by +coding (@code{clobber} (@code{match_scratch} @dots{})). If you do +clobber a pseudo register, use one which appears nowhere else---generate +a new one each time. Otherwise, you may confuse CSE. + +There is one other known use for clobbering a pseudo register in a +@code{parallel}: when one of the input operands of the insn is also +clobbered by the insn. In this case, using the same pseudo register in +the clobber and elsewhere in the insn produces the expected results. + +@findex use +@item (use @var{x}) +Represents the use of the value of @var{x}. It indicates that the +value in @var{x} at this point in the program is needed, even though +it may not be apparent why this is so. Therefore, the compiler will +not attempt to delete previous instructions whose only effect is to +store a value in @var{x}. @var{x} must be a @code{reg} expression. + +During the delayed branch scheduling phase, @var{x} may be an insn. +This indicates that @var{x} previously was located at this place in the +code and its data dependencies need to be taken into account. These +@code{use} insns will be deleted before the delayed branch scheduling +phase exits. + +@findex parallel +@item (parallel [@var{x0} @var{x1} @dots{}]) +Represents several side effects performed in parallel. The square +brackets stand for a vector; the operand of @code{parallel} is a +vector of expressions. @var{x0}, @var{x1} and so on are individual +side effect expressions---expressions of code @code{set}, @code{call}, +@code{return}, @code{clobber} or @code{use}.@refill + +``In parallel'' means that first all the values used in the individual +side-effects are computed, and second all the actual side-effects are +performed. For example, + +@example +(parallel [(set (reg:SI 1) (mem:SI (reg:SI 1))) + (set (mem:SI (reg:SI 1)) (reg:SI 1))]) +@end example + +@noindent +says unambiguously that the values of hard register 1 and the memory +location addressed by it are interchanged. In both places where +@code{(reg:SI 1)} appears as a memory address it refers to the value +in register 1 @emph{before} the execution of the insn. + +It follows that it is @emph{incorrect} to use @code{parallel} and +expect the result of one @code{set} to be available for the next one. +For example, people sometimes attempt to represent a jump-if-zero +instruction this way: + +@example +(parallel [(set (cc0) (reg:SI 34)) + (set (pc) (if_then_else + (eq (cc0) (const_int 0)) + (label_ref @dots{}) + (pc)))]) +@end example + +@noindent +But this is incorrect, because it says that the jump condition depends +on the condition code value @emph{before} this instruction, not on the +new value that is set by this instruction. + +@cindex peephole optimization, RTL representation +Peephole optimization, which takes place together with final assembly +code output, can produce insns whose patterns consist of a @code{parallel} +whose elements are the operands needed to output the resulting +assembler code---often @code{reg}, @code{mem} or constant expressions. +This would not be well-formed RTL at any other stage in compilation, +but it is ok then because no further optimization remains to be done. +However, the definition of the macro @code{NOTICE_UPDATE_CC}, if +any, must deal with such insns if you define any peephole optimizations. + +@findex sequence +@item (sequence [@var{insns} @dots{}]) +Represents a sequence of insns. Each of the @var{insns} that appears +in the vector is suitable for appearing in the chain of insns, so it +must be an @code{insn}, @code{jump_insn}, @code{call_insn}, +@code{code_label}, @code{barrier} or @code{note}. + +A @code{sequence} RTX is never placed in an actual insn during RTL +generation. It represents the sequence of insns that result from a +@code{define_expand} @emph{before} those insns are passed to +@code{emit_insn} to insert them in the chain of insns. When actually +inserted, the individual sub-insns are separated out and the +@code{sequence} is forgotten. + +After delay-slot scheduling is completed, an insn and all the insns that +reside in its delay slots are grouped together into a @code{sequence}. +The insn requiring the delay slot is the first insn in the vector; +subsequent insns are to be placed in the delay slot. + +@code{INSN_ANNULLED_BRANCH_P} is set on an insn in a delay slot to +indicate that a branch insn should be used that will conditionally annul +the effect of the insns in the delay slots. In such a case, +@code{INSN_FROM_TARGET_P} indicates that the insn is from the target of +the branch and should be executed only if the branch is taken; otherwise +the insn should be executed only if the branch is not taken. +@xref{Delay Slots}. +@end table + +These expression codes appear in place of a side effect, as the body of +an insn, though strictly speaking they do not always describe side +effects as such: + +@table @code +@findex asm_input +@item (asm_input @var{s}) +Represents literal assembler code as described by the string @var{s}. + +@findex unspec +@findex unspec_volatile +@item (unspec [@var{operands} @dots{}] @var{index}) +@itemx (unspec_volatile [@var{operands} @dots{}] @var{index}) +Represents a machine-specific operation on @var{operands}. @var{index} +selects between multiple machine-specific operations. +@code{unspec_volatile} is used for volatile operations and operations +that may trap; @code{unspec} is used for other operations. + +These codes may appear inside a @code{pattern} of an +insn, inside a @code{parallel}, or inside an expression. + +@findex addr_vec +@item (addr_vec:@var{m} [@var{lr0} @var{lr1} @dots{}]) +Represents a table of jump addresses. The vector elements @var{lr0}, +etc., are @code{label_ref} expressions. The mode @var{m} specifies +how much space is given to each address; normally @var{m} would be +@code{Pmode}. + +@findex addr_diff_vec +@item (addr_diff_vec:@var{m} @var{base} [@var{lr0} @var{lr1} @dots{}]) +Represents a table of jump addresses expressed as offsets from +@var{base}. The vector elements @var{lr0}, etc., are @code{label_ref} +expressions and so is @var{base}. The mode @var{m} specifies how much +space is given to each address-difference.@refill +@end table + +@node Incdec, Assembler, Side Effects, RTL +@section Embedded Side-Effects on Addresses +@cindex RTL preincrement +@cindex RTL postincrement +@cindex RTL predecrement +@cindex RTL postdecrement + +Four special side-effect expression codes appear as memory addresses. + +@table @code +@findex pre_dec +@item (pre_dec:@var{m} @var{x}) +Represents the side effect of decrementing @var{x} by a standard +amount and represents also the value that @var{x} has after being +decremented. @var{x} must be a @code{reg} or @code{mem}, but most +machines allow only a @code{reg}. @var{m} must be the machine mode +for pointers on the machine in use. The amount @var{x} is decremented +by is the length in bytes of the machine mode of the containing memory +reference of which this expression serves as the address. Here is an +example of its use:@refill + +@example +(mem:DF (pre_dec:SI (reg:SI 39))) +@end example + +@noindent +This says to decrement pseudo register 39 by the length of a @code{DFmode} +value and use the result to address a @code{DFmode} value. + +@findex pre_inc +@item (pre_inc:@var{m} @var{x}) +Similar, but specifies incrementing @var{x} instead of decrementing it. + +@findex post_dec +@item (post_dec:@var{m} @var{x}) +Represents the same side effect as @code{pre_dec} but a different +value. The value represented here is the value @var{x} has @i{before} +being decremented. + +@findex post_inc +@item (post_inc:@var{m} @var{x}) +Similar, but specifies incrementing @var{x} instead of decrementing it. +@end table + +These embedded side effect expressions must be used with care. Instruction +patterns may not use them. Until the @samp{flow} pass of the compiler, +they may occur only to represent pushes onto the stack. The @samp{flow} +pass finds cases where registers are incremented or decremented in one +instruction and used as an address shortly before or after; these cases are +then transformed to use pre- or post-increment or -decrement. + +If a register used as the operand of these expressions is used in +another address in an insn, the original value of the register is used. +Uses of the register outside of an address are not permitted within the +same insn as a use in an embedded side effect expression because such +insns behave differently on different machines and hence must be treated +as ambiguous and disallowed. + +An instruction that can be represented with an embedded side effect +could also be represented using @code{parallel} containing an additional +@code{set} to describe how the address register is altered. This is not +done because machines that allow these operations at all typically +allow them wherever a memory address is called for. Describing them as +additional parallel stores would require doubling the number of entries +in the machine description. + +@node Assembler, Insns, Incdec, RTL +@section Assembler Instructions as Expressions +@cindex assembler instructions in RTL + +@cindex @code{asm_operands}, usage +The RTX code @code{asm_operands} represents a value produced by a +user-specified assembler instruction. It is used to represent +an @code{asm} statement with arguments. An @code{asm} statement with +a single output operand, like this: + +@smallexample +asm ("foo %1,%2,%0" : "=a" (outputvar) : "g" (x + y), "di" (*z)); +@end smallexample + +@noindent +is represented using a single @code{asm_operands} RTX which represents +the value that is stored in @code{outputvar}: + +@smallexample +(set @var{rtx-for-outputvar} + (asm_operands "foo %1,%2,%0" "a" 0 + [@var{rtx-for-addition-result} @var{rtx-for-*z}] + [(asm_input:@var{m1} "g") + (asm_input:@var{m2} "di")])) +@end smallexample + +@noindent +Here the operands of the @code{asm_operands} RTX are the assembler +template string, the output-operand's constraint, the index-number of the +output operand among the output operands specified, a vector of input +operand RTX's, and a vector of input-operand modes and constraints. The +mode @var{m1} is the mode of the sum @code{x+y}; @var{m2} is that of +@code{*z}. + +When an @code{asm} statement has multiple output values, its insn has +several such @code{set} RTX's inside of a @code{parallel}. Each @code{set} +contains a @code{asm_operands}; all of these share the same assembler +template and vectors, but each contains the constraint for the respective +output operand. They are also distinguished by the output-operand index +number, which is 0, 1, @dots{} for successive output operands. + +@node Insns, Calls, Assembler, RTL +@section Insns +@cindex insns + +The RTL representation of the code for a function is a doubly-linked +chain of objects called @dfn{insns}. Insns are expressions with +special codes that are used for no other purpose. Some insns are +actual instructions; others represent dispatch tables for @code{switch} +statements; others represent labels to jump to or various sorts of +declarative information. + +In addition to its own specific data, each insn must have a unique +id-number that distinguishes it from all other insns in the current +function (after delayed branch scheduling, copies of an insn with the +same id-number may be present in multiple places in a function, but +these copies will always be identical and will only appear inside a +@code{sequence}), and chain pointers to the preceding and following +insns. These three fields occupy the same position in every insn, +independent of the expression code of the insn. They could be accessed +with @code{XEXP} and @code{XINT}, but instead three special macros are +always used: + +@table @code +@findex INSN_UID +@item INSN_UID (@var{i}) +Accesses the unique id of insn @var{i}. + +@findex PREV_INSN +@item PREV_INSN (@var{i}) +Accesses the chain pointer to the insn preceding @var{i}. +If @var{i} is the first insn, this is a null pointer. + +@findex NEXT_INSN +@item NEXT_INSN (@var{i}) +Accesses the chain pointer to the insn following @var{i}. +If @var{i} is the last insn, this is a null pointer. +@end table + +@findex get_insns +@findex get_last_insn +The first insn in the chain is obtained by calling @code{get_insns}; the +last insn is the result of calling @code{get_last_insn}. Within the +chain delimited by these insns, the @code{NEXT_INSN} and +@code{PREV_INSN} pointers must always correspond: if @var{insn} is not +the first insn, + +@example +NEXT_INSN (PREV_INSN (@var{insn})) == @var{insn} +@end example + +@noindent +is always true and if @var{insn} is not the last insn, + +@example +PREV_INSN (NEXT_INSN (@var{insn})) == @var{insn} +@end example + +@noindent +is always true. + +After delay slot scheduling, some of the insns in the chain might be +@code{sequence} expressions, which contain a vector of insns. The value +of @code{NEXT_INSN} in all but the last of these insns is the next insn +in the vector; the value of @code{NEXT_INSN} of the last insn in the vector +is the same as the value of @code{NEXT_INSN} for the @code{sequence} in +which it is contained. Similar rules apply for @code{PREV_INSN}. + +This means that the above invariants are not necessarily true for insns +inside @code{sequence} expressions. Specifically, if @var{insn} is the +first insn in a @code{sequence}, @code{NEXT_INSN (PREV_INSN (@var{insn}))} +is the insn containing the @code{sequence} expression, as is the value +of @code{PREV_INSN (NEXT_INSN (@var{insn}))} is @var{insn} is the last +insn in the @code{sequence} expression. You can use these expressions +to find the containing @code{sequence} expression.@refill + +Every insn has one of the following six expression codes: + +@table @code +@findex insn +@item insn +The expression code @code{insn} is used for instructions that do not jump +and do not do function calls. @code{sequence} expressions are always +contained in insns with code @code{insn} even if one of those insns +should jump or do function calls. + +Insns with code @code{insn} have four additional fields beyond the three +mandatory ones listed above. These four are described in a table below. + +@findex jump_insn +@item jump_insn +The expression code @code{jump_insn} is used for instructions that may +jump (or, more generally, may contain @code{label_ref} expressions). If +there is an instruction to return from the current function, it is +recorded as a @code{jump_insn}. + +@findex JUMP_LABEL +@code{jump_insn} insns have the same extra fields as @code{insn} insns, +accessed in the same way and in addition contain a field +@code{JUMP_LABEL} which is defined once jump optimization has completed. + +For simple conditional and unconditional jumps, this field contains the +@code{code_label} to which this insn will (possibly conditionally) +branch. In a more complex jump, @code{JUMP_LABEL} records one of the +labels that the insn refers to; the only way to find the others +is to scan the entire body of the insn. + +Return insns count as jumps, but since they do not refer to any labels, +they have zero in the @code{JUMP_LABEL} field. + +@findex call_insn +@item call_insn +The expression code @code{call_insn} is used for instructions that may do +function calls. It is important to distinguish these instructions because +they imply that certain registers and memory locations may be altered +unpredictably. + +@findex CALL_INSN_FUNCTION_USAGE +@code{call_insn} insns have the same extra fields as @code{insn} insns, +accessed in the same way and in addition contain a field +@code{CALL_INSN_FUNCTION_USAGE}, which contains a list (chain of +@code{expr_list} expressions) containing @code{use} and @code{clobber} +expressions that denote hard registers used or clobbered by the called +function. A register specified in a @code{clobber} in this list is +modified @emph{after} the execution of the @code{call_insn}, while a +register in a @code{clobber} in the body of the @code{call_insn} is +clobbered before the insn completes execution. @code{clobber} +expressions in this list augment registers specified in +@code{CALL_USED_REGISTERS} (@pxref{Register Basics}). + +@findex code_label +@findex CODE_LABEL_NUMBER +@item code_label +A @code{code_label} insn represents a label that a jump insn can jump +to. It contains two special fields of data in addition to the three +standard ones. @code{CODE_LABEL_NUMBER} is used to hold the @dfn{label +number}, a number that identifies this label uniquely among all the +labels in the compilation (not just in the current function). +Ultimately, the label is represented in the assembler output as an +assembler label, usually of the form @samp{L@var{n}} where @var{n} is +the label number. + +When a @code{code_label} appears in an RTL expression, it normally +appears within a @code{label_ref} which represents the address of +the label, as a number. + +@findex LABEL_NUSES +The field @code{LABEL_NUSES} is only defined once the jump optimization +phase is completed and contains the number of times this label is +referenced in the current function. + +@findex barrier +@item barrier +Barriers are placed in the instruction stream when control cannot flow +past them. They are placed after unconditional jump instructions to +indicate that the jumps are unconditional and after calls to +@code{volatile} functions, which do not return (e.g., @code{exit}). +They contain no information beyond the three standard fields. + +@findex note +@findex NOTE_LINE_NUMBER +@findex NOTE_SOURCE_FILE +@item note +@code{note} insns are used to represent additional debugging and +declarative information. They contain two nonstandard fields, an +integer which is accessed with the macro @code{NOTE_LINE_NUMBER} and a +string accessed with @code{NOTE_SOURCE_FILE}. + +If @code{NOTE_LINE_NUMBER} is positive, the note represents the +position of a source line and @code{NOTE_SOURCE_FILE} is the source file name +that the line came from. These notes control generation of line +number data in the assembler output. + +Otherwise, @code{NOTE_LINE_NUMBER} is not really a line number but a +code with one of the following values (and @code{NOTE_SOURCE_FILE} +must contain a null pointer): + +@table @code +@findex NOTE_INSN_DELETED +@item NOTE_INSN_DELETED +Such a note is completely ignorable. Some passes of the compiler +delete insns by altering them into notes of this kind. + +@findex NOTE_INSN_BLOCK_BEG +@findex NOTE_INSN_BLOCK_END +@item NOTE_INSN_BLOCK_BEG +@itemx NOTE_INSN_BLOCK_END +These types of notes indicate the position of the beginning and end +of a level of scoping of variable names. They control the output +of debugging information. + +@findex NOTE_INSN_LOOP_BEG +@findex NOTE_INSN_LOOP_END +@item NOTE_INSN_LOOP_BEG +@itemx NOTE_INSN_LOOP_END +These types of notes indicate the position of the beginning and end +of a @code{while} or @code{for} loop. They enable the loop optimizer +to find loops quickly. + +@findex NOTE_INSN_LOOP_CONT +@item NOTE_INSN_LOOP_CONT +Appears at the place in a loop that @code{continue} statements jump to. + +@findex NOTE_INSN_LOOP_VTOP +@item NOTE_INSN_LOOP_VTOP +This note indicates the place in a loop where the exit test begins for +those loops in which the exit test has been duplicated. This position +becomes another virtual start of the loop when considering loop +invariants. + +@findex NOTE_INSN_FUNCTION_END +@item NOTE_INSN_FUNCTION_END +Appears near the end of the function body, just before the label that +@code{return} statements jump to (on machine where a single instruction +does not suffice for returning). This note may be deleted by jump +optimization. + +@findex NOTE_INSN_SETJMP +@item NOTE_INSN_SETJMP +Appears following each call to @code{setjmp} or a related function. +@end table + +These codes are printed symbolically when they appear in debugging dumps. +@end table + +@cindex @code{HImode}, in @code{insn} +@cindex @code{QImode}, in @code{insn} +The machine mode of an insn is normally @code{VOIDmode}, but some +phases use the mode for various purposes; for example, the reload pass +sets it to @code{HImode} if the insn needs reloading but not register +elimination and @code{QImode} if both are required. The common +subexpression elimination pass sets the mode of an insn to @code{QImode} +when it is the first insn in a block that has already been processed. + +Here is a table of the extra fields of @code{insn}, @code{jump_insn} +and @code{call_insn} insns: + +@table @code +@findex PATTERN +@item PATTERN (@var{i}) +An expression for the side effect performed by this insn. This must be +one of the following codes: @code{set}, @code{call}, @code{use}, +@code{clobber}, @code{return}, @code{asm_input}, @code{asm_output}, +@code{addr_vec}, @code{addr_diff_vec}, @code{trap_if}, @code{unspec}, +@code{unspec_volatile}, @code{parallel}, or @code{sequence}. If it is a @code{parallel}, +each element of the @code{parallel} must be one these codes, except that +@code{parallel} expressions cannot be nested and @code{addr_vec} and +@code{addr_diff_vec} are not permitted inside a @code{parallel} expression. + +@findex INSN_CODE +@item INSN_CODE (@var{i}) +An integer that says which pattern in the machine description matches +this insn, or -1 if the matching has not yet been attempted. + +Such matching is never attempted and this field remains -1 on an insn +whose pattern consists of a single @code{use}, @code{clobber}, +@code{asm_input}, @code{addr_vec} or @code{addr_diff_vec} expression. + +@findex asm_noperands +Matching is also never attempted on insns that result from an @code{asm} +statement. These contain at least one @code{asm_operands} expression. +The function @code{asm_noperands} returns a non-negative value for +such insns. + +In the debugging output, this field is printed as a number followed by +a symbolic representation that locates the pattern in the @file{md} +file as some small positive or negative offset from a named pattern. + +@findex LOG_LINKS +@item LOG_LINKS (@var{i}) +A list (chain of @code{insn_list} expressions) giving information about +dependencies between instructions within a basic block. Neither a jump +nor a label may come between the related insns. + +@findex REG_NOTES +@item REG_NOTES (@var{i}) +A list (chain of @code{expr_list} and @code{insn_list} expressions) +giving miscellaneous information about the insn. It is often information +pertaining to the registers used in this insn. +@end table + +The @code{LOG_LINKS} field of an insn is a chain of @code{insn_list} +expressions. Each of these has two operands: the first is an insn, +and the second is another @code{insn_list} expression (the next one in +the chain). The last @code{insn_list} in the chain has a null pointer +as second operand. The significant thing about the chain is which +insns appear in it (as first operands of @code{insn_list} +expressions). Their order is not significant. + +This list is originally set up by the flow analysis pass; it is a null +pointer until then. Flow only adds links for those data dependencies +which can be used for instruction combination. For each insn, the flow +analysis pass adds a link to insns which store into registers values +that are used for the first time in this insn. The instruction +scheduling pass adds extra links so that every dependence will be +represented. Links represent data dependencies, antidependencies and +output dependencies; the machine mode of the link distinguishes these +three types: antidependencies have mode @code{REG_DEP_ANTI}, output +dependencies have mode @code{REG_DEP_OUTPUT}, and data dependencies have +mode @code{VOIDmode}. + +The @code{REG_NOTES} field of an insn is a chain similar to the +@code{LOG_LINKS} field but it includes @code{expr_list} expressions in +addition to @code{insn_list} expressions. There are several kinds +of register notes, which are distinguished by the machine mode, which +in a register note is really understood as being an @code{enum reg_note}. +The first operand @var{op} of the note is data whose meaning depends on +the kind of note. + +@findex REG_NOTE_KIND +@findex PUT_REG_NOTE_KIND +The macro @code{REG_NOTE_KIND (@var{x})} returns the kind of +register note. Its counterpart, the macro @code{PUT_REG_NOTE_KIND +(@var{x}, @var{newkind})} sets the register note type of @var{x} to be +@var{newkind}. + +Register notes are of three classes: They may say something about an +input to an insn, they may say something about an output of an insn, or +they may create a linkage between two insns. There are also a set +of values that are only used in @code{LOG_LINKS}. + +These register notes annotate inputs to an insn: + +@table @code +@findex REG_DEAD +@item REG_DEAD +The value in @var{op} dies in this insn; that is to say, altering the +value immediately after this insn would not affect the future behavior +of the program. + +This does not necessarily mean that the register @var{op} has no useful +value after this insn since it may also be an output of the insn. In +such a case, however, a @code{REG_DEAD} note would be redundant and is +usually not present until after the reload pass, but no code relies on +this fact. + +@findex REG_INC +@item REG_INC +The register @var{op} is incremented (or decremented; at this level +there is no distinction) by an embedded side effect inside this insn. +This means it appears in a @code{post_inc}, @code{pre_inc}, +@code{post_dec} or @code{pre_dec} expression. + +@findex REG_NONNEG +@item REG_NONNEG +The register @var{op} is known to have a nonnegative value when this +insn is reached. This is used so that decrement and branch until zero +instructions, such as the m68k dbra, can be matched. + +The @code{REG_NONNEG} note is added to insns only if the machine +description has a @samp{decrement_and_branch_until_zero} pattern. + +@findex REG_NO_CONFLICT +@item REG_NO_CONFLICT +This insn does not cause a conflict between @var{op} and the item +being set by this insn even though it might appear that it does. +In other words, if the destination register and @var{op} could +otherwise be assigned the same register, this insn does not +prevent that assignment. + +Insns with this note are usually part of a block that begins with a +@code{clobber} insn specifying a multi-word pseudo register (which will +be the output of the block), a group of insns that each set one word of +the value and have the @code{REG_NO_CONFLICT} note attached, and a final +insn that copies the output to itself with an attached @code{REG_EQUAL} +note giving the expression being computed. This block is encapsulated +with @code{REG_LIBCALL} and @code{REG_RETVAL} notes on the first and +last insns, respectively. + +@findex REG_LABEL +@item REG_LABEL +This insn uses @var{op}, a @code{code_label}, but is not a +@code{jump_insn}. The presence of this note allows jump optimization to +be aware that @var{op} is, in fact, being used. +@end table + +The following notes describe attributes of outputs of an insn: + +@table @code +@findex REG_EQUIV +@findex REG_EQUAL +@item REG_EQUIV +@itemx REG_EQUAL +This note is only valid on an insn that sets only one register and +indicates that that register will be equal to @var{op} at run time; the +scope of this equivalence differs between the two types of notes. The +value which the insn explicitly copies into the register may look +different from @var{op}, but they will be equal at run time. If the +output of the single @code{set} is a @code{strict_low_part} expression, +the note refers to the register that is contained in @code{SUBREG_REG} +of the @code{subreg} expression. + +For @code{REG_EQUIV}, the register is equivalent to @var{op} throughout +the entire function, and could validly be replaced in all its +occurrences by @var{op}. (``Validly'' here refers to the data flow of +the program; simple replacement may make some insns invalid.) For +example, when a constant is loaded into a register that is never +assigned any other value, this kind of note is used. + +When a parameter is copied into a pseudo-register at entry to a function, +a note of this kind records that the register is equivalent to the stack +slot where the parameter was passed. Although in this case the register +may be set by other insns, it is still valid to replace the register +by the stack slot throughout the function. + +In the case of @code{REG_EQUAL}, the register that is set by this insn +will be equal to @var{op} at run time at the end of this insn but not +necessarily elsewhere in the function. In this case, @var{op} +is typically an arithmetic expression. For example, when a sequence of +insns such as a library call is used to perform an arithmetic operation, +this kind of note is attached to the insn that produces or copies the +final value. + +These two notes are used in different ways by the compiler passes. +@code{REG_EQUAL} is used by passes prior to register allocation (such as +common subexpression elimination and loop optimization) to tell them how +to think of that value. @code{REG_EQUIV} notes are used by register +allocation to indicate that there is an available substitute expression +(either a constant or a @code{mem} expression for the location of a +parameter on the stack) that may be used in place of a register if +insufficient registers are available. + +Except for stack homes for parameters, which are indicated by a +@code{REG_EQUIV} note and are not useful to the early optimization +passes and pseudo registers that are equivalent to a memory location +throughout there entire life, which is not detected until later in +the compilation, all equivalences are initially indicated by an attached +@code{REG_EQUAL} note. In the early stages of register allocation, a +@code{REG_EQUAL} note is changed into a @code{REG_EQUIV} note if +@var{op} is a constant and the insn represents the only set of its +destination register. + +Thus, compiler passes prior to register allocation need only check for +@code{REG_EQUAL} notes and passes subsequent to register allocation +need only check for @code{REG_EQUIV} notes. + +@findex REG_UNUSED +@item REG_UNUSED +The register @var{op} being set by this insn will not be used in a +subsequent insn. This differs from a @code{REG_DEAD} note, which +indicates that the value in an input will not be used subsequently. +These two notes are independent; both may be present for the same +register. + +@findex REG_WAS_0 +@item REG_WAS_0 +The single output of this insn contained zero before this insn. +@var{op} is the insn that set it to zero. You can rely on this note if +it is present and @var{op} has not been deleted or turned into a @code{note}; +its absence implies nothing. +@end table + +These notes describe linkages between insns. They occur in pairs: one +insn has one of a pair of notes that points to a second insn, which has +the inverse note pointing back to the first insn. + +@table @code +@findex REG_RETVAL +@item REG_RETVAL +This insn copies the value of a multi-insn sequence (for example, a +library call), and @var{op} is the first insn of the sequence (for a +library call, the first insn that was generated to set up the arguments +for the library call). + +Loop optimization uses this note to treat such a sequence as a single +operation for code motion purposes and flow analysis uses this note to +delete such sequences whose results are dead. + +A @code{REG_EQUAL} note will also usually be attached to this insn to +provide the expression being computed by the sequence. + +@findex REG_LIBCALL +@item REG_LIBCALL +This is the inverse of @code{REG_RETVAL}: it is placed on the first +insn of a multi-insn sequence, and it points to the last one. + +@findex REG_CC_SETTER +@findex REG_CC_USER +@item REG_CC_SETTER +@itemx REG_CC_USER +On machines that use @code{cc0}, the insns which set and use @code{cc0} +set and use @code{cc0} are adjacent. However, when branch delay slot +filling is done, this may no longer be true. In this case a +@code{REG_CC_USER} note will be placed on the insn setting @code{cc0} to +point to the insn using @code{cc0} and a @code{REG_CC_SETTER} note will +be placed on the insn using @code{cc0} to point to the insn setting +@code{cc0}.@refill +@end table + +These values are only used in the @code{LOG_LINKS} field, and indicate +the type of dependency that each link represents. Links which indicate +a data dependence (a read after write dependence) do not use any code, +they simply have mode @code{VOIDmode}, and are printed without any +descriptive text. + +@table @code +@findex REG_DEP_ANTI +@item REG_DEP_ANTI +This indicates an anti dependence (a write after read dependence). + +@findex REG_DEP_OUTPUT +@item REG_DEP_OUTPUT +This indicates an output dependence (a write after write dependence). +@end table + +For convenience, the machine mode in an @code{insn_list} or +@code{expr_list} is printed using these symbolic codes in debugging dumps. + +@findex insn_list +@findex expr_list +The only difference between the expression codes @code{insn_list} and +@code{expr_list} is that the first operand of an @code{insn_list} is +assumed to be an insn and is printed in debugging dumps as the insn's +unique id; the first operand of an @code{expr_list} is printed in the +ordinary way as an expression. + +@node Calls, Sharing, Insns, RTL +@section RTL Representation of Function-Call Insns +@cindex calling functions in RTL +@cindex RTL function-call insns +@cindex function-call insns + +Insns that call subroutines have the RTL expression code @code{call_insn}. +These insns must satisfy special rules, and their bodies must use a special +RTL expression code, @code{call}. + +@cindex @code{call} usage +A @code{call} expression has two operands, as follows: + +@example +(call (mem:@var{fm} @var{addr}) @var{nbytes}) +@end example + +@noindent +Here @var{nbytes} is an operand that represents the number of bytes of +argument data being passed to the subroutine, @var{fm} is a machine mode +(which must equal as the definition of the @code{FUNCTION_MODE} macro in +the machine description) and @var{addr} represents the address of the +subroutine. + +For a subroutine that returns no value, the @code{call} expression as +shown above is the entire body of the insn, except that the insn might +also contain @code{use} or @code{clobber} expressions. + +@cindex @code{BLKmode}, and function return values +For a subroutine that returns a value whose mode is not @code{BLKmode}, +the value is returned in a hard register. If this register's number is +@var{r}, then the body of the call insn looks like this: + +@example +(set (reg:@var{m} @var{r}) + (call (mem:@var{fm} @var{addr}) @var{nbytes})) +@end example + +@noindent +This RTL expression makes it clear (to the optimizer passes) that the +appropriate register receives a useful value in this insn. + +When a subroutine returns a @code{BLKmode} value, it is handled by +passing to the subroutine the address of a place to store the value. +So the call insn itself does not ``return'' any value, and it has the +same RTL form as a call that returns nothing. + +On some machines, the call instruction itself clobbers some register, +for example to contain the return address. @code{call_insn} insns +on these machines should have a body which is a @code{parallel} +that contains both the @code{call} expression and @code{clobber} +expressions that indicate which registers are destroyed. Similarly, +if the call instruction requires some register other than the stack +pointer that is not explicitly mentioned it its RTL, a @code{use} +subexpression should mention that register. + +Functions that are called are assumed to modify all registers listed in +the configuration macro @code{CALL_USED_REGISTERS} (@pxref{Register +Basics}) and, with the exception of @code{const} functions and library +calls, to modify all of memory. + +Insns containing just @code{use} expressions directly precede the +@code{call_insn} insn to indicate which registers contain inputs to the +function. Similarly, if registers other than those in +@code{CALL_USED_REGISTERS} are clobbered by the called function, insns +containing a single @code{clobber} follow immediately after the call to +indicate which registers. + +@node Sharing +@section Structure Sharing Assumptions +@cindex sharing of RTL components +@cindex RTL structure sharing assumptions + +The compiler assumes that certain kinds of RTL expressions are unique; +there do not exist two distinct objects representing the same value. +In other cases, it makes an opposite assumption: that no RTL expression +object of a certain kind appears in more than one place in the +containing structure. + +These assumptions refer to a single function; except for the RTL +objects that describe global variables and external functions, +and a few standard objects such as small integer constants, +no RTL objects are common to two functions. + +@itemize @bullet +@cindex @code{reg}, RTL sharing +@item +Each pseudo-register has only a single @code{reg} object to represent it, +and therefore only a single machine mode. + +@cindex symbolic label +@cindex @code{symbol_ref}, RTL sharing +@item +For any symbolic label, there is only one @code{symbol_ref} object +referring to it. + +@cindex @code{const_int}, RTL sharing +@item +There is only one @code{const_int} expression with value 0, only +one with value 1, and only one with value @minus{}1. +Some other integer values are also stored uniquely. + +@cindex @code{pc}, RTL sharing +@item +There is only one @code{pc} expression. + +@cindex @code{cc0}, RTL sharing +@item +There is only one @code{cc0} expression. + +@cindex @code{const_double}, RTL sharing +@item +There is only one @code{const_double} expression with value 0 for +each floating point mode. Likewise for values 1 and 2. + +@cindex @code{label_ref}, RTL sharing +@cindex @code{scratch}, RTL sharing +@item +No @code{label_ref} or @code{scratch} appears in more than one place in +the RTL structure; in other words, it is safe to do a tree-walk of all +the insns in the function and assume that each time a @code{label_ref} +or @code{scratch} is seen it is distinct from all others that are seen. + +@cindex @code{mem}, RTL sharing +@item +Only one @code{mem} object is normally created for each static +variable or stack slot, so these objects are frequently shared in all +the places they appear. However, separate but equal objects for these +variables are occasionally made. + +@cindex @code{asm_operands}, RTL sharing +@item +When a single @code{asm} statement has multiple output operands, a +distinct @code{asm_operands} expression is made for each output operand. +However, these all share the vector which contains the sequence of input +operands. This sharing is used later on to test whether two +@code{asm_operands} expressions come from the same statement, so all +optimizations must carefully preserve the sharing if they copy the +vector at all. + +@item +No RTL object appears in more than one place in the RTL structure +except as described above. Many passes of the compiler rely on this +by assuming that they can modify RTL objects in place without unwanted +side-effects on other insns. + +@findex unshare_all_rtl +@item +During initial RTL generation, shared structure is freely introduced. +After all the RTL for a function has been generated, all shared +structure is copied by @code{unshare_all_rtl} in @file{emit-rtl.c}, +after which the above rules are guaranteed to be followed. + +@findex copy_rtx_if_shared +@item +During the combiner pass, shared structure within an insn can exist +temporarily. However, the shared structure is copied before the +combiner is finished with the insn. This is done by calling +@code{copy_rtx_if_shared}, which is a subroutine of +@code{unshare_all_rtl}. +@end itemize + +@node Reading RTL +@section Reading RTL + +To read an RTL object from a file, call @code{read_rtx}. It takes one +argument, a stdio stream, and returns a single RTL object. + +Reading RTL from a file is very slow. This is no currently not a +problem because reading RTL occurs only as part of building the +compiler. + +People frequently have the idea of using RTL stored as text in a file as +an interface between a language front end and the bulk of GNU CC. This +idea is not feasible. + +GNU CC was designed to use RTL internally only. Correct RTL for a given +program is very dependent on the particular target machine. And the RTL +does not contain all the information about the program. + +The proper way to interface GNU CC to a new language front end is with +the ``tree'' data structure. There is no manual for this data +structure, but it is described in the files @file{tree.h} and +@file{tree.def}. |