diff options
Diffstat (limited to 'gnu/usr.bin/cc/cc_int/reload1.c')
-rw-r--r-- | gnu/usr.bin/cc/cc_int/reload1.c | 7122 |
1 files changed, 7122 insertions, 0 deletions
diff --git a/gnu/usr.bin/cc/cc_int/reload1.c b/gnu/usr.bin/cc/cc_int/reload1.c new file mode 100644 index 0000000..e46d764 --- /dev/null +++ b/gnu/usr.bin/cc/cc_int/reload1.c @@ -0,0 +1,7122 @@ +/* Reload pseudo regs into hard regs for insns that require hard regs. + Copyright (C) 1987, 88, 89, 92, 93, 1994 Free Software Foundation, Inc. + +This file is part of GNU CC. + +GNU CC is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +GNU CC is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with GNU CC; see the file COPYING. If not, write to +the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ + + +#include <stdio.h> +#include "config.h" +#include "rtl.h" +#include "obstack.h" +#include "insn-config.h" +#include "insn-flags.h" +#include "insn-codes.h" +#include "flags.h" +#include "expr.h" +#include "regs.h" +#include "hard-reg-set.h" +#include "reload.h" +#include "recog.h" +#include "basic-block.h" +#include "output.h" + +/* This file contains the reload pass of the compiler, which is + run after register allocation has been done. It checks that + each insn is valid (operands required to be in registers really + are in registers of the proper class) and fixes up invalid ones + by copying values temporarily into registers for the insns + that need them. + + The results of register allocation are described by the vector + reg_renumber; the insns still contain pseudo regs, but reg_renumber + can be used to find which hard reg, if any, a pseudo reg is in. + + The technique we always use is to free up a few hard regs that are + called ``reload regs'', and for each place where a pseudo reg + must be in a hard reg, copy it temporarily into one of the reload regs. + + All the pseudos that were formerly allocated to the hard regs that + are now in use as reload regs must be ``spilled''. This means + that they go to other hard regs, or to stack slots if no other + available hard regs can be found. Spilling can invalidate more + insns, requiring additional need for reloads, so we must keep checking + until the process stabilizes. + + For machines with different classes of registers, we must keep track + of the register class needed for each reload, and make sure that + we allocate enough reload registers of each class. + + The file reload.c contains the code that checks one insn for + validity and reports the reloads that it needs. This file + is in charge of scanning the entire rtl code, accumulating the + reload needs, spilling, assigning reload registers to use for + fixing up each insn, and generating the new insns to copy values + into the reload registers. */ + + +#ifndef REGISTER_MOVE_COST +#define REGISTER_MOVE_COST(x, y) 2 +#endif + +#ifndef MEMORY_MOVE_COST +#define MEMORY_MOVE_COST(x) 4 +#endif + +/* During reload_as_needed, element N contains a REG rtx for the hard reg + into which reg N has been reloaded (perhaps for a previous insn). */ +static rtx *reg_last_reload_reg; + +/* Elt N nonzero if reg_last_reload_reg[N] has been set in this insn + for an output reload that stores into reg N. */ +static char *reg_has_output_reload; + +/* Indicates which hard regs are reload-registers for an output reload + in the current insn. */ +static HARD_REG_SET reg_is_output_reload; + +/* Element N is the constant value to which pseudo reg N is equivalent, + or zero if pseudo reg N is not equivalent to a constant. + find_reloads looks at this in order to replace pseudo reg N + with the constant it stands for. */ +rtx *reg_equiv_constant; + +/* Element N is a memory location to which pseudo reg N is equivalent, + prior to any register elimination (such as frame pointer to stack + pointer). Depending on whether or not it is a valid address, this value + is transferred to either reg_equiv_address or reg_equiv_mem. */ +rtx *reg_equiv_memory_loc; + +/* Element N is the address of stack slot to which pseudo reg N is equivalent. + This is used when the address is not valid as a memory address + (because its displacement is too big for the machine.) */ +rtx *reg_equiv_address; + +/* Element N is the memory slot to which pseudo reg N is equivalent, + or zero if pseudo reg N is not equivalent to a memory slot. */ +rtx *reg_equiv_mem; + +/* Widest width in which each pseudo reg is referred to (via subreg). */ +static int *reg_max_ref_width; + +/* Element N is the insn that initialized reg N from its equivalent + constant or memory slot. */ +static rtx *reg_equiv_init; + +/* During reload_as_needed, element N contains the last pseudo regno + reloaded into the Nth reload register. This vector is in parallel + with spill_regs. If that pseudo reg occupied more than one register, + reg_reloaded_contents points to that pseudo for each spill register in + use; all of these must remain set for an inheritance to occur. */ +static int reg_reloaded_contents[FIRST_PSEUDO_REGISTER]; + +/* During reload_as_needed, element N contains the insn for which + the Nth reload register was last used. This vector is in parallel + with spill_regs, and its contents are significant only when + reg_reloaded_contents is significant. */ +static rtx reg_reloaded_insn[FIRST_PSEUDO_REGISTER]; + +/* Number of spill-regs so far; number of valid elements of spill_regs. */ +static int n_spills; + +/* In parallel with spill_regs, contains REG rtx's for those regs. + Holds the last rtx used for any given reg, or 0 if it has never + been used for spilling yet. This rtx is reused, provided it has + the proper mode. */ +static rtx spill_reg_rtx[FIRST_PSEUDO_REGISTER]; + +/* In parallel with spill_regs, contains nonzero for a spill reg + that was stored after the last time it was used. + The precise value is the insn generated to do the store. */ +static rtx spill_reg_store[FIRST_PSEUDO_REGISTER]; + +/* This table is the inverse mapping of spill_regs: + indexed by hard reg number, + it contains the position of that reg in spill_regs, + or -1 for something that is not in spill_regs. */ +static short spill_reg_order[FIRST_PSEUDO_REGISTER]; + +/* This reg set indicates registers that may not be used for retrying global + allocation. The registers that may not be used include all spill registers + and the frame pointer (if we are using one). */ +HARD_REG_SET forbidden_regs; + +/* This reg set indicates registers that are not good for spill registers. + They will not be used to complete groups of spill registers. This includes + all fixed registers, registers that may be eliminated, and, if + SMALL_REGISTER_CLASSES is not defined, registers explicitly used in the rtl. + + (spill_reg_order prevents these registers from being used to start a + group.) */ +static HARD_REG_SET bad_spill_regs; + +/* Describes order of use of registers for reloading + of spilled pseudo-registers. `spills' is the number of + elements that are actually valid; new ones are added at the end. */ +static short spill_regs[FIRST_PSEUDO_REGISTER]; + +/* Describes order of preference for putting regs into spill_regs. + Contains the numbers of all the hard regs, in order most preferred first. + This order is different for each function. + It is set up by order_regs_for_reload. + Empty elements at the end contain -1. */ +static short potential_reload_regs[FIRST_PSEUDO_REGISTER]; + +/* 1 for a hard register that appears explicitly in the rtl + (for example, function value registers, special registers + used by insns, structure value pointer registers). */ +static char regs_explicitly_used[FIRST_PSEUDO_REGISTER]; + +/* Indicates if a register was counted against the need for + groups. 0 means it can count against max_nongroup instead. */ +static HARD_REG_SET counted_for_groups; + +/* Indicates if a register was counted against the need for + non-groups. 0 means it can become part of a new group. + During choose_reload_regs, 1 here means don't use this reg + as part of a group, even if it seems to be otherwise ok. */ +static HARD_REG_SET counted_for_nongroups; + +/* Indexed by pseudo reg number N, + says may not delete stores into the real (memory) home of pseudo N. + This is set if we already substituted a memory equivalent in some uses, + which happens when we have to eliminate the fp from it. */ +static char *cannot_omit_stores; + +/* Nonzero if indirect addressing is supported on the machine; this means + that spilling (REG n) does not require reloading it into a register in + order to do (MEM (REG n)) or (MEM (PLUS (REG n) (CONST_INT c))). The + value indicates the level of indirect addressing supported, e.g., two + means that (MEM (MEM (REG n))) is also valid if (REG n) does not get + a hard register. */ + +static char spill_indirect_levels; + +/* Nonzero if indirect addressing is supported when the innermost MEM is + of the form (MEM (SYMBOL_REF sym)). It is assumed that the level to + which these are valid is the same as spill_indirect_levels, above. */ + +char indirect_symref_ok; + +/* Nonzero if an address (plus (reg frame_pointer) (reg ...)) is valid. */ + +char double_reg_address_ok; + +/* Record the stack slot for each spilled hard register. */ + +static rtx spill_stack_slot[FIRST_PSEUDO_REGISTER]; + +/* Width allocated so far for that stack slot. */ + +static int spill_stack_slot_width[FIRST_PSEUDO_REGISTER]; + +/* Indexed by register class and basic block number, nonzero if there is + any need for a spill register of that class in that basic block. + The pointer is 0 if we did stupid allocation and don't know + the structure of basic blocks. */ + +char *basic_block_needs[N_REG_CLASSES]; + +/* First uid used by insns created by reload in this function. + Used in find_equiv_reg. */ +int reload_first_uid; + +/* Flag set by local-alloc or global-alloc if anything is live in + a call-clobbered reg across calls. */ + +int caller_save_needed; + +/* Set to 1 while reload_as_needed is operating. + Required by some machines to handle any generated moves differently. */ + +int reload_in_progress = 0; + +/* These arrays record the insn_code of insns that may be needed to + perform input and output reloads of special objects. They provide a + place to pass a scratch register. */ + +enum insn_code reload_in_optab[NUM_MACHINE_MODES]; +enum insn_code reload_out_optab[NUM_MACHINE_MODES]; + +/* This obstack is used for allocation of rtl during register elimination. + The allocated storage can be freed once find_reloads has processed the + insn. */ + +struct obstack reload_obstack; +char *reload_firstobj; + +#define obstack_chunk_alloc xmalloc +#define obstack_chunk_free free + +/* List of labels that must never be deleted. */ +extern rtx forced_labels; + +/* This structure is used to record information about register eliminations. + Each array entry describes one possible way of eliminating a register + in favor of another. If there is more than one way of eliminating a + particular register, the most preferred should be specified first. */ + +static struct elim_table +{ + int from; /* Register number to be eliminated. */ + int to; /* Register number used as replacement. */ + int initial_offset; /* Initial difference between values. */ + int can_eliminate; /* Non-zero if this elimination can be done. */ + int can_eliminate_previous; /* Value of CAN_ELIMINATE in previous scan over + insns made by reload. */ + int offset; /* Current offset between the two regs. */ + int max_offset; /* Maximum offset between the two regs. */ + int previous_offset; /* Offset at end of previous insn. */ + int ref_outside_mem; /* "to" has been referenced outside a MEM. */ + rtx from_rtx; /* REG rtx for the register to be eliminated. + We cannot simply compare the number since + we might then spuriously replace a hard + register corresponding to a pseudo + assigned to the reg to be eliminated. */ + rtx to_rtx; /* REG rtx for the replacement. */ +} reg_eliminate[] = + +/* If a set of eliminable registers was specified, define the table from it. + Otherwise, default to the normal case of the frame pointer being + replaced by the stack pointer. */ + +#ifdef ELIMINABLE_REGS + ELIMINABLE_REGS; +#else + {{ FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}}; +#endif + +#define NUM_ELIMINABLE_REGS (sizeof reg_eliminate / sizeof reg_eliminate[0]) + +/* Record the number of pending eliminations that have an offset not equal + to their initial offset. If non-zero, we use a new copy of each + replacement result in any insns encountered. */ +static int num_not_at_initial_offset; + +/* Count the number of registers that we may be able to eliminate. */ +static int num_eliminable; + +/* For each label, we record the offset of each elimination. If we reach + a label by more than one path and an offset differs, we cannot do the + elimination. This information is indexed by the number of the label. + The first table is an array of flags that records whether we have yet + encountered a label and the second table is an array of arrays, one + entry in the latter array for each elimination. */ + +static char *offsets_known_at; +static int (*offsets_at)[NUM_ELIMINABLE_REGS]; + +/* Number of labels in the current function. */ + +static int num_labels; + +struct hard_reg_n_uses { int regno; int uses; }; + +static int possible_group_p PROTO((int, int *)); +static void count_possible_groups PROTO((int *, enum machine_mode *, + int *)); +static int modes_equiv_for_class_p PROTO((enum machine_mode, + enum machine_mode, + enum reg_class)); +static void spill_failure PROTO((rtx)); +static int new_spill_reg PROTO((int, int, int *, int *, int, + FILE *)); +static void delete_dead_insn PROTO((rtx)); +static void alter_reg PROTO((int, int)); +static void mark_scratch_live PROTO((rtx)); +static void set_label_offsets PROTO((rtx, rtx, int)); +static int eliminate_regs_in_insn PROTO((rtx, int)); +static void mark_not_eliminable PROTO((rtx, rtx)); +static int spill_hard_reg PROTO((int, int, FILE *, int)); +static void scan_paradoxical_subregs PROTO((rtx)); +static int hard_reg_use_compare PROTO((struct hard_reg_n_uses *, + struct hard_reg_n_uses *)); +static void order_regs_for_reload PROTO((void)); +static int compare_spill_regs PROTO((short *, short *)); +static void reload_as_needed PROTO((rtx, int)); +static void forget_old_reloads_1 PROTO((rtx, rtx)); +static int reload_reg_class_lower PROTO((short *, short *)); +static void mark_reload_reg_in_use PROTO((int, int, enum reload_type, + enum machine_mode)); +static void clear_reload_reg_in_use PROTO((int, int, enum reload_type, + enum machine_mode)); +static int reload_reg_free_p PROTO((int, int, enum reload_type)); +static int reload_reg_free_before_p PROTO((int, int, enum reload_type)); +static int reload_reg_reaches_end_p PROTO((int, int, enum reload_type)); +static int reloads_conflict PROTO((int, int)); +static int allocate_reload_reg PROTO((int, rtx, int, int)); +static void choose_reload_regs PROTO((rtx, rtx)); +static void merge_assigned_reloads PROTO((rtx)); +static void emit_reload_insns PROTO((rtx)); +static void delete_output_reload PROTO((rtx, int, rtx)); +static void inc_for_reload PROTO((rtx, rtx, int)); +static int constraint_accepts_reg_p PROTO((char *, rtx)); +static int count_occurrences PROTO((rtx, rtx)); + +/* Initialize the reload pass once per compilation. */ + +void +init_reload () +{ + register int i; + + /* Often (MEM (REG n)) is still valid even if (REG n) is put on the stack. + Set spill_indirect_levels to the number of levels such addressing is + permitted, zero if it is not permitted at all. */ + + register rtx tem + = gen_rtx (MEM, Pmode, + gen_rtx (PLUS, Pmode, + gen_rtx (REG, Pmode, LAST_VIRTUAL_REGISTER + 1), + GEN_INT (4))); + spill_indirect_levels = 0; + + while (memory_address_p (QImode, tem)) + { + spill_indirect_levels++; + tem = gen_rtx (MEM, Pmode, tem); + } + + /* See if indirect addressing is valid for (MEM (SYMBOL_REF ...)). */ + + tem = gen_rtx (MEM, Pmode, gen_rtx (SYMBOL_REF, Pmode, "foo")); + indirect_symref_ok = memory_address_p (QImode, tem); + + /* See if reg+reg is a valid (and offsettable) address. */ + + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + { + tem = gen_rtx (PLUS, Pmode, + gen_rtx (REG, Pmode, HARD_FRAME_POINTER_REGNUM), + gen_rtx (REG, Pmode, i)); + /* This way, we make sure that reg+reg is an offsettable address. */ + tem = plus_constant (tem, 4); + + if (memory_address_p (QImode, tem)) + { + double_reg_address_ok = 1; + break; + } + } + + /* Initialize obstack for our rtl allocation. */ + gcc_obstack_init (&reload_obstack); + reload_firstobj = (char *) obstack_alloc (&reload_obstack, 0); +} + +/* Main entry point for the reload pass. + + FIRST is the first insn of the function being compiled. + + GLOBAL nonzero means we were called from global_alloc + and should attempt to reallocate any pseudoregs that we + displace from hard regs we will use for reloads. + If GLOBAL is zero, we do not have enough information to do that, + so any pseudo reg that is spilled must go to the stack. + + DUMPFILE is the global-reg debugging dump file stream, or 0. + If it is nonzero, messages are written to it to describe + which registers are seized as reload regs, which pseudo regs + are spilled from them, and where the pseudo regs are reallocated to. + + Return value is nonzero if reload failed + and we must not do any more for this function. */ + +int +reload (first, global, dumpfile) + rtx first; + int global; + FILE *dumpfile; +{ + register int class; + register int i, j, k; + register rtx insn; + register struct elim_table *ep; + + int something_changed; + int something_needs_reloads; + int something_needs_elimination; + int new_basic_block_needs; + enum reg_class caller_save_spill_class = NO_REGS; + int caller_save_group_size = 1; + + /* Nonzero means we couldn't get enough spill regs. */ + int failure = 0; + + /* The basic block number currently being processed for INSN. */ + int this_block; + + /* Make sure even insns with volatile mem refs are recognizable. */ + init_recog (); + + /* Enable find_equiv_reg to distinguish insns made by reload. */ + reload_first_uid = get_max_uid (); + + for (i = 0; i < N_REG_CLASSES; i++) + basic_block_needs[i] = 0; + +#ifdef SECONDARY_MEMORY_NEEDED + /* Initialize the secondary memory table. */ + clear_secondary_mem (); +#endif + + /* Remember which hard regs appear explicitly + before we merge into `regs_ever_live' the ones in which + pseudo regs have been allocated. */ + bcopy (regs_ever_live, regs_explicitly_used, sizeof regs_ever_live); + + /* We don't have a stack slot for any spill reg yet. */ + bzero ((char *) spill_stack_slot, sizeof spill_stack_slot); + bzero ((char *) spill_stack_slot_width, sizeof spill_stack_slot_width); + + /* Initialize the save area information for caller-save, in case some + are needed. */ + init_save_areas (); + + /* Compute which hard registers are now in use + as homes for pseudo registers. + This is done here rather than (eg) in global_alloc + because this point is reached even if not optimizing. */ + + for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++) + mark_home_live (i); + + for (i = 0; i < scratch_list_length; i++) + if (scratch_list[i]) + mark_scratch_live (scratch_list[i]); + + /* Make sure that the last insn in the chain + is not something that needs reloading. */ + emit_note (NULL_PTR, NOTE_INSN_DELETED); + + /* Find all the pseudo registers that didn't get hard regs + but do have known equivalent constants or memory slots. + These include parameters (known equivalent to parameter slots) + and cse'd or loop-moved constant memory addresses. + + Record constant equivalents in reg_equiv_constant + so they will be substituted by find_reloads. + Record memory equivalents in reg_mem_equiv so they can + be substituted eventually by altering the REG-rtx's. */ + + reg_equiv_constant = (rtx *) alloca (max_regno * sizeof (rtx)); + bzero ((char *) reg_equiv_constant, max_regno * sizeof (rtx)); + reg_equiv_memory_loc = (rtx *) alloca (max_regno * sizeof (rtx)); + bzero ((char *) reg_equiv_memory_loc, max_regno * sizeof (rtx)); + reg_equiv_mem = (rtx *) alloca (max_regno * sizeof (rtx)); + bzero ((char *) reg_equiv_mem, max_regno * sizeof (rtx)); + reg_equiv_init = (rtx *) alloca (max_regno * sizeof (rtx)); + bzero ((char *) reg_equiv_init, max_regno * sizeof (rtx)); + reg_equiv_address = (rtx *) alloca (max_regno * sizeof (rtx)); + bzero ((char *) reg_equiv_address, max_regno * sizeof (rtx)); + reg_max_ref_width = (int *) alloca (max_regno * sizeof (int)); + bzero ((char *) reg_max_ref_width, max_regno * sizeof (int)); + cannot_omit_stores = (char *) alloca (max_regno); + bzero (cannot_omit_stores, max_regno); + +#ifdef SMALL_REGISTER_CLASSES + CLEAR_HARD_REG_SET (forbidden_regs); +#endif + + /* Look for REG_EQUIV notes; record what each pseudo is equivalent to. + Also find all paradoxical subregs and find largest such for each pseudo. + On machines with small register classes, record hard registers that + are used for user variables. These can never be used for spills. */ + + for (insn = first; insn; insn = NEXT_INSN (insn)) + { + rtx set = single_set (insn); + + if (set != 0 && GET_CODE (SET_DEST (set)) == REG) + { + rtx note = find_reg_note (insn, REG_EQUIV, NULL_RTX); + if (note +#ifdef LEGITIMATE_PIC_OPERAND_P + && (! CONSTANT_P (XEXP (note, 0)) || ! flag_pic + || LEGITIMATE_PIC_OPERAND_P (XEXP (note, 0))) +#endif + ) + { + rtx x = XEXP (note, 0); + i = REGNO (SET_DEST (set)); + if (i > LAST_VIRTUAL_REGISTER) + { + if (GET_CODE (x) == MEM) + reg_equiv_memory_loc[i] = x; + else if (CONSTANT_P (x)) + { + if (LEGITIMATE_CONSTANT_P (x)) + reg_equiv_constant[i] = x; + else + reg_equiv_memory_loc[i] + = force_const_mem (GET_MODE (SET_DEST (set)), x); + } + else + continue; + + /* If this register is being made equivalent to a MEM + and the MEM is not SET_SRC, the equivalencing insn + is one with the MEM as a SET_DEST and it occurs later. + So don't mark this insn now. */ + if (GET_CODE (x) != MEM + || rtx_equal_p (SET_SRC (set), x)) + reg_equiv_init[i] = insn; + } + } + } + + /* If this insn is setting a MEM from a register equivalent to it, + this is the equivalencing insn. */ + else if (set && GET_CODE (SET_DEST (set)) == MEM + && GET_CODE (SET_SRC (set)) == REG + && reg_equiv_memory_loc[REGNO (SET_SRC (set))] + && rtx_equal_p (SET_DEST (set), + reg_equiv_memory_loc[REGNO (SET_SRC (set))])) + reg_equiv_init[REGNO (SET_SRC (set))] = insn; + + if (GET_RTX_CLASS (GET_CODE (insn)) == 'i') + scan_paradoxical_subregs (PATTERN (insn)); + } + + /* Does this function require a frame pointer? */ + + frame_pointer_needed = (! flag_omit_frame_pointer +#ifdef EXIT_IGNORE_STACK + /* ?? If EXIT_IGNORE_STACK is set, we will not save + and restore sp for alloca. So we can't eliminate + the frame pointer in that case. At some point, + we should improve this by emitting the + sp-adjusting insns for this case. */ + || (current_function_calls_alloca + && EXIT_IGNORE_STACK) +#endif + || FRAME_POINTER_REQUIRED); + + num_eliminable = 0; + + /* Initialize the table of registers to eliminate. The way we do this + depends on how the eliminable registers were defined. */ +#ifdef ELIMINABLE_REGS + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++) + { + ep->can_eliminate = ep->can_eliminate_previous + = (CAN_ELIMINATE (ep->from, ep->to) + && ! (ep->to == STACK_POINTER_REGNUM && frame_pointer_needed)); + } +#else + reg_eliminate[0].can_eliminate = reg_eliminate[0].can_eliminate_previous + = ! frame_pointer_needed; +#endif + + /* Count the number of eliminable registers and build the FROM and TO + REG rtx's. Note that code in gen_rtx will cause, e.g., + gen_rtx (REG, Pmode, STACK_POINTER_REGNUM) to equal stack_pointer_rtx. + We depend on this. */ + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++) + { + num_eliminable += ep->can_eliminate; + ep->from_rtx = gen_rtx (REG, Pmode, ep->from); + ep->to_rtx = gen_rtx (REG, Pmode, ep->to); + } + + num_labels = max_label_num () - get_first_label_num (); + + /* Allocate the tables used to store offset information at labels. */ + offsets_known_at = (char *) alloca (num_labels); + offsets_at + = (int (*)[NUM_ELIMINABLE_REGS]) + alloca (num_labels * NUM_ELIMINABLE_REGS * sizeof (int)); + + offsets_known_at -= get_first_label_num (); + offsets_at -= get_first_label_num (); + + /* Alter each pseudo-reg rtx to contain its hard reg number. + Assign stack slots to the pseudos that lack hard regs or equivalents. + Do not touch virtual registers. */ + + for (i = LAST_VIRTUAL_REGISTER + 1; i < max_regno; i++) + alter_reg (i, -1); + + /* Round size of stack frame to BIGGEST_ALIGNMENT. This must be done here + because the stack size may be a part of the offset computation for + register elimination. */ + assign_stack_local (BLKmode, 0, 0); + + /* If we have some registers we think can be eliminated, scan all insns to + see if there is an insn that sets one of these registers to something + other than itself plus a constant. If so, the register cannot be + eliminated. Doing this scan here eliminates an extra pass through the + main reload loop in the most common case where register elimination + cannot be done. */ + for (insn = first; insn && num_eliminable; insn = NEXT_INSN (insn)) + if (GET_CODE (insn) == INSN || GET_CODE (insn) == JUMP_INSN + || GET_CODE (insn) == CALL_INSN) + note_stores (PATTERN (insn), mark_not_eliminable); + +#ifndef REGISTER_CONSTRAINTS + /* If all the pseudo regs have hard regs, + except for those that are never referenced, + we know that no reloads are needed. */ + /* But that is not true if there are register constraints, since + in that case some pseudos might be in the wrong kind of hard reg. */ + + for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++) + if (reg_renumber[i] == -1 && reg_n_refs[i] != 0) + break; + + if (i == max_regno && num_eliminable == 0 && ! caller_save_needed) + return; +#endif + + /* Compute the order of preference for hard registers to spill. + Store them by decreasing preference in potential_reload_regs. */ + + order_regs_for_reload (); + + /* So far, no hard regs have been spilled. */ + n_spills = 0; + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + spill_reg_order[i] = -1; + + /* On most machines, we can't use any register explicitly used in the + rtl as a spill register. But on some, we have to. Those will have + taken care to keep the life of hard regs as short as possible. */ + +#ifndef SMALL_REGISTER_CLASSES + COPY_HARD_REG_SET (forbidden_regs, bad_spill_regs); +#endif + + /* Spill any hard regs that we know we can't eliminate. */ + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++) + if (! ep->can_eliminate) + spill_hard_reg (ep->from, global, dumpfile, 1); + +#if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM + if (frame_pointer_needed) + spill_hard_reg (HARD_FRAME_POINTER_REGNUM, global, dumpfile, 1); +#endif + + if (global) + for (i = 0; i < N_REG_CLASSES; i++) + { + basic_block_needs[i] = (char *) alloca (n_basic_blocks); + bzero (basic_block_needs[i], n_basic_blocks); + } + + /* From now on, we need to emit any moves without making new pseudos. */ + reload_in_progress = 1; + + /* This loop scans the entire function each go-round + and repeats until one repetition spills no additional hard regs. */ + + /* This flag is set when a pseudo reg is spilled, + to require another pass. Note that getting an additional reload + reg does not necessarily imply any pseudo reg was spilled; + sometimes we find a reload reg that no pseudo reg was allocated in. */ + something_changed = 1; + /* This flag is set if there are any insns that require reloading. */ + something_needs_reloads = 0; + /* This flag is set if there are any insns that require register + eliminations. */ + something_needs_elimination = 0; + while (something_changed) + { + rtx after_call = 0; + + /* For each class, number of reload regs needed in that class. + This is the maximum over all insns of the needs in that class + of the individual insn. */ + int max_needs[N_REG_CLASSES]; + /* For each class, size of group of consecutive regs + that is needed for the reloads of this class. */ + int group_size[N_REG_CLASSES]; + /* For each class, max number of consecutive groups needed. + (Each group contains group_size[CLASS] consecutive registers.) */ + int max_groups[N_REG_CLASSES]; + /* For each class, max number needed of regs that don't belong + to any of the groups. */ + int max_nongroups[N_REG_CLASSES]; + /* For each class, the machine mode which requires consecutive + groups of regs of that class. + If two different modes ever require groups of one class, + they must be the same size and equally restrictive for that class, + otherwise we can't handle the complexity. */ + enum machine_mode group_mode[N_REG_CLASSES]; + /* Record the insn where each maximum need is first found. */ + rtx max_needs_insn[N_REG_CLASSES]; + rtx max_groups_insn[N_REG_CLASSES]; + rtx max_nongroups_insn[N_REG_CLASSES]; + rtx x; + int starting_frame_size = get_frame_size (); + int previous_frame_pointer_needed = frame_pointer_needed; + static char *reg_class_names[] = REG_CLASS_NAMES; + + something_changed = 0; + bzero ((char *) max_needs, sizeof max_needs); + bzero ((char *) max_groups, sizeof max_groups); + bzero ((char *) max_nongroups, sizeof max_nongroups); + bzero ((char *) max_needs_insn, sizeof max_needs_insn); + bzero ((char *) max_groups_insn, sizeof max_groups_insn); + bzero ((char *) max_nongroups_insn, sizeof max_nongroups_insn); + bzero ((char *) group_size, sizeof group_size); + for (i = 0; i < N_REG_CLASSES; i++) + group_mode[i] = VOIDmode; + + /* Keep track of which basic blocks are needing the reloads. */ + this_block = 0; + + /* Remember whether any element of basic_block_needs + changes from 0 to 1 in this pass. */ + new_basic_block_needs = 0; + + /* Reset all offsets on eliminable registers to their initial values. */ +#ifdef ELIMINABLE_REGS + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++) + { + INITIAL_ELIMINATION_OFFSET (ep->from, ep->to, ep->initial_offset); + ep->previous_offset = ep->offset + = ep->max_offset = ep->initial_offset; + } +#else +#ifdef INITIAL_FRAME_POINTER_OFFSET + INITIAL_FRAME_POINTER_OFFSET (reg_eliminate[0].initial_offset); +#else + if (!FRAME_POINTER_REQUIRED) + abort (); + reg_eliminate[0].initial_offset = 0; +#endif + reg_eliminate[0].previous_offset = reg_eliminate[0].max_offset + = reg_eliminate[0].offset = reg_eliminate[0].initial_offset; +#endif + + num_not_at_initial_offset = 0; + + bzero ((char *) &offsets_known_at[get_first_label_num ()], num_labels); + + /* Set a known offset for each forced label to be at the initial offset + of each elimination. We do this because we assume that all + computed jumps occur from a location where each elimination is + at its initial offset. */ + + for (x = forced_labels; x; x = XEXP (x, 1)) + if (XEXP (x, 0)) + set_label_offsets (XEXP (x, 0), NULL_RTX, 1); + + /* For each pseudo register that has an equivalent location defined, + try to eliminate any eliminable registers (such as the frame pointer) + assuming initial offsets for the replacement register, which + is the normal case. + + If the resulting location is directly addressable, substitute + the MEM we just got directly for the old REG. + + If it is not addressable but is a constant or the sum of a hard reg + and constant, it is probably not addressable because the constant is + out of range, in that case record the address; we will generate + hairy code to compute the address in a register each time it is + needed. Similarly if it is a hard register, but one that is not + valid as an address register. + + If the location is not addressable, but does not have one of the + above forms, assign a stack slot. We have to do this to avoid the + potential of producing lots of reloads if, e.g., a location involves + a pseudo that didn't get a hard register and has an equivalent memory + location that also involves a pseudo that didn't get a hard register. + + Perhaps at some point we will improve reload_when_needed handling + so this problem goes away. But that's very hairy. */ + + for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++) + if (reg_renumber[i] < 0 && reg_equiv_memory_loc[i]) + { + rtx x = eliminate_regs (reg_equiv_memory_loc[i], 0, NULL_RTX); + + if (strict_memory_address_p (GET_MODE (regno_reg_rtx[i]), + XEXP (x, 0))) + reg_equiv_mem[i] = x, reg_equiv_address[i] = 0; + else if (CONSTANT_P (XEXP (x, 0)) + || (GET_CODE (XEXP (x, 0)) == REG + && REGNO (XEXP (x, 0)) < FIRST_PSEUDO_REGISTER) + || (GET_CODE (XEXP (x, 0)) == PLUS + && GET_CODE (XEXP (XEXP (x, 0), 0)) == REG + && (REGNO (XEXP (XEXP (x, 0), 0)) + < FIRST_PSEUDO_REGISTER) + && CONSTANT_P (XEXP (XEXP (x, 0), 1)))) + reg_equiv_address[i] = XEXP (x, 0), reg_equiv_mem[i] = 0; + else + { + /* Make a new stack slot. Then indicate that something + changed so we go back and recompute offsets for + eliminable registers because the allocation of memory + below might change some offset. reg_equiv_{mem,address} + will be set up for this pseudo on the next pass around + the loop. */ + reg_equiv_memory_loc[i] = 0; + reg_equiv_init[i] = 0; + alter_reg (i, -1); + something_changed = 1; + } + } + + /* If we allocated another pseudo to the stack, redo elimination + bookkeeping. */ + if (something_changed) + continue; + + /* If caller-saves needs a group, initialize the group to include + the size and mode required for caller-saves. */ + + if (caller_save_group_size > 1) + { + group_mode[(int) caller_save_spill_class] = Pmode; + group_size[(int) caller_save_spill_class] = caller_save_group_size; + } + + /* Compute the most additional registers needed by any instruction. + Collect information separately for each class of regs. */ + + for (insn = first; insn; insn = NEXT_INSN (insn)) + { + if (global && this_block + 1 < n_basic_blocks + && insn == basic_block_head[this_block+1]) + ++this_block; + + /* If this is a label, a JUMP_INSN, or has REG_NOTES (which + might include REG_LABEL), we need to see what effects this + has on the known offsets at labels. */ + + if (GET_CODE (insn) == CODE_LABEL || GET_CODE (insn) == JUMP_INSN + || (GET_RTX_CLASS (GET_CODE (insn)) == 'i' + && REG_NOTES (insn) != 0)) + set_label_offsets (insn, insn, 0); + + if (GET_RTX_CLASS (GET_CODE (insn)) == 'i') + { + /* Nonzero means don't use a reload reg that overlaps + the place where a function value can be returned. */ + rtx avoid_return_reg = 0; + + rtx old_body = PATTERN (insn); + int old_code = INSN_CODE (insn); + rtx old_notes = REG_NOTES (insn); + int did_elimination = 0; + + /* To compute the number of reload registers of each class + needed for an insn, we must similate what choose_reload_regs + can do. We do this by splitting an insn into an "input" and + an "output" part. RELOAD_OTHER reloads are used in both. + The input part uses those reloads, RELOAD_FOR_INPUT reloads, + which must be live over the entire input section of reloads, + and the maximum of all the RELOAD_FOR_INPUT_ADDRESS and + RELOAD_FOR_OPERAND_ADDRESS reloads, which conflict with the + inputs. + + The registers needed for output are RELOAD_OTHER and + RELOAD_FOR_OUTPUT, which are live for the entire output + portion, and the maximum of all the RELOAD_FOR_OUTPUT_ADDRESS + reloads for each operand. + + The total number of registers needed is the maximum of the + inputs and outputs. */ + + struct needs + { + /* [0] is normal, [1] is nongroup. */ + int regs[2][N_REG_CLASSES]; + int groups[N_REG_CLASSES]; + }; + + /* Each `struct needs' corresponds to one RELOAD_... type. */ + struct { + struct needs other; + struct needs input; + struct needs output; + struct needs insn; + struct needs other_addr; + struct needs op_addr; + struct needs op_addr_reload; + struct needs in_addr[MAX_RECOG_OPERANDS]; + struct needs out_addr[MAX_RECOG_OPERANDS]; + } insn_needs; + + /* If needed, eliminate any eliminable registers. */ + if (num_eliminable) + did_elimination = eliminate_regs_in_insn (insn, 0); + +#ifdef SMALL_REGISTER_CLASSES + /* Set avoid_return_reg if this is an insn + that might use the value of a function call. */ + if (GET_CODE (insn) == CALL_INSN) + { + if (GET_CODE (PATTERN (insn)) == SET) + after_call = SET_DEST (PATTERN (insn)); + else if (GET_CODE (PATTERN (insn)) == PARALLEL + && GET_CODE (XVECEXP (PATTERN (insn), 0, 0)) == SET) + after_call = SET_DEST (XVECEXP (PATTERN (insn), 0, 0)); + else + after_call = 0; + } + else if (after_call != 0 + && !(GET_CODE (PATTERN (insn)) == SET + && SET_DEST (PATTERN (insn)) == stack_pointer_rtx)) + { + if (reg_referenced_p (after_call, PATTERN (insn))) + avoid_return_reg = after_call; + after_call = 0; + } +#endif /* SMALL_REGISTER_CLASSES */ + + /* Analyze the instruction. */ + find_reloads (insn, 0, spill_indirect_levels, global, + spill_reg_order); + + /* Remember for later shortcuts which insns had any reloads or + register eliminations. + + One might think that it would be worthwhile to mark insns + that need register replacements but not reloads, but this is + not safe because find_reloads may do some manipulation of + the insn (such as swapping commutative operands), which would + be lost when we restore the old pattern after register + replacement. So the actions of find_reloads must be redone in + subsequent passes or in reload_as_needed. + + However, it is safe to mark insns that need reloads + but not register replacement. */ + + PUT_MODE (insn, (did_elimination ? QImode + : n_reloads ? HImode + : GET_MODE (insn) == DImode ? DImode + : VOIDmode)); + + /* Discard any register replacements done. */ + if (did_elimination) + { + obstack_free (&reload_obstack, reload_firstobj); + PATTERN (insn) = old_body; + INSN_CODE (insn) = old_code; + REG_NOTES (insn) = old_notes; + something_needs_elimination = 1; + } + + /* If this insn has no reloads, we need not do anything except + in the case of a CALL_INSN when we have caller-saves and + caller-save needs reloads. */ + + if (n_reloads == 0 + && ! (GET_CODE (insn) == CALL_INSN + && caller_save_spill_class != NO_REGS)) + continue; + + something_needs_reloads = 1; + bzero ((char *) &insn_needs, sizeof insn_needs); + + /* Count each reload once in every class + containing the reload's own class. */ + + for (i = 0; i < n_reloads; i++) + { + register enum reg_class *p; + enum reg_class class = reload_reg_class[i]; + int size; + enum machine_mode mode; + int nongroup_need; + struct needs *this_needs; + + /* Don't count the dummy reloads, for which one of the + regs mentioned in the insn can be used for reloading. + Don't count optional reloads. + Don't count reloads that got combined with others. */ + if (reload_reg_rtx[i] != 0 + || reload_optional[i] != 0 + || (reload_out[i] == 0 && reload_in[i] == 0 + && ! reload_secondary_p[i])) + continue; + + /* Show that a reload register of this class is needed + in this basic block. We do not use insn_needs and + insn_groups because they are overly conservative for + this purpose. */ + if (global && ! basic_block_needs[(int) class][this_block]) + { + basic_block_needs[(int) class][this_block] = 1; + new_basic_block_needs = 1; + } + + + mode = reload_inmode[i]; + if (GET_MODE_SIZE (reload_outmode[i]) > GET_MODE_SIZE (mode)) + mode = reload_outmode[i]; + size = CLASS_MAX_NREGS (class, mode); + + /* If this class doesn't want a group, determine if we have + a nongroup need or a regular need. We have a nongroup + need if this reload conflicts with a group reload whose + class intersects with this reload's class. */ + + nongroup_need = 0; + if (size == 1) + for (j = 0; j < n_reloads; j++) + if ((CLASS_MAX_NREGS (reload_reg_class[j], + (GET_MODE_SIZE (reload_outmode[j]) + > GET_MODE_SIZE (reload_inmode[j])) + ? reload_outmode[j] + : reload_inmode[j]) + > 1) + && (!reload_optional[j]) + && (reload_in[j] != 0 || reload_out[j] != 0 + || reload_secondary_p[j]) + && reloads_conflict (i, j) + && reg_classes_intersect_p (class, + reload_reg_class[j])) + { + nongroup_need = 1; + break; + } + + /* Decide which time-of-use to count this reload for. */ + switch (reload_when_needed[i]) + { + case RELOAD_OTHER: + this_needs = &insn_needs.other; + break; + case RELOAD_FOR_INPUT: + this_needs = &insn_needs.input; + break; + case RELOAD_FOR_OUTPUT: + this_needs = &insn_needs.output; + break; + case RELOAD_FOR_INSN: + this_needs = &insn_needs.insn; + break; + case RELOAD_FOR_OTHER_ADDRESS: + this_needs = &insn_needs.other_addr; + break; + case RELOAD_FOR_INPUT_ADDRESS: + this_needs = &insn_needs.in_addr[reload_opnum[i]]; + break; + case RELOAD_FOR_OUTPUT_ADDRESS: + this_needs = &insn_needs.out_addr[reload_opnum[i]]; + break; + case RELOAD_FOR_OPERAND_ADDRESS: + this_needs = &insn_needs.op_addr; + break; + case RELOAD_FOR_OPADDR_ADDR: + this_needs = &insn_needs.op_addr_reload; + break; + } + + if (size > 1) + { + enum machine_mode other_mode, allocate_mode; + + /* Count number of groups needed separately from + number of individual regs needed. */ + this_needs->groups[(int) class]++; + p = reg_class_superclasses[(int) class]; + while (*p != LIM_REG_CLASSES) + this_needs->groups[(int) *p++]++; + + /* Record size and mode of a group of this class. */ + /* If more than one size group is needed, + make all groups the largest needed size. */ + if (group_size[(int) class] < size) + { + other_mode = group_mode[(int) class]; + allocate_mode = mode; + + group_size[(int) class] = size; + group_mode[(int) class] = mode; + } + else + { + other_mode = mode; + allocate_mode = group_mode[(int) class]; + } + + /* Crash if two dissimilar machine modes both need + groups of consecutive regs of the same class. */ + + if (other_mode != VOIDmode && other_mode != allocate_mode + && ! modes_equiv_for_class_p (allocate_mode, + other_mode, class)) + abort (); + } + else if (size == 1) + { + this_needs->regs[nongroup_need][(int) class] += 1; + p = reg_class_superclasses[(int) class]; + while (*p != LIM_REG_CLASSES) + this_needs->regs[nongroup_need][(int) *p++] += 1; + } + else + abort (); + } + + /* All reloads have been counted for this insn; + now merge the various times of use. + This sets insn_needs, etc., to the maximum total number + of registers needed at any point in this insn. */ + + for (i = 0; i < N_REG_CLASSES; i++) + { + int in_max, out_max; + + /* Compute normal and nongroup needs. */ + for (j = 0; j <= 1; j++) + { + for (in_max = 0, out_max = 0, k = 0; + k < reload_n_operands; k++) + { + in_max + = MAX (in_max, insn_needs.in_addr[k].regs[j][i]); + out_max + = MAX (out_max, insn_needs.out_addr[k].regs[j][i]); + } + + /* RELOAD_FOR_INSN reloads conflict with inputs, outputs, + and operand addresses but not things used to reload + them. Similarly, RELOAD_FOR_OPERAND_ADDRESS reloads + don't conflict with things needed to reload inputs or + outputs. */ + + in_max = MAX (MAX (insn_needs.op_addr.regs[j][i], + insn_needs.op_addr_reload.regs[j][i]), + in_max); + + out_max = MAX (out_max, insn_needs.insn.regs[j][i]); + + insn_needs.input.regs[j][i] + = MAX (insn_needs.input.regs[j][i] + + insn_needs.op_addr.regs[j][i] + + insn_needs.insn.regs[j][i], + in_max + insn_needs.input.regs[j][i]); + + insn_needs.output.regs[j][i] += out_max; + insn_needs.other.regs[j][i] + += MAX (MAX (insn_needs.input.regs[j][i], + insn_needs.output.regs[j][i]), + insn_needs.other_addr.regs[j][i]); + + } + + /* Now compute group needs. */ + for (in_max = 0, out_max = 0, j = 0; + j < reload_n_operands; j++) + { + in_max = MAX (in_max, insn_needs.in_addr[j].groups[i]); + out_max + = MAX (out_max, insn_needs.out_addr[j].groups[i]); + } + + in_max = MAX (MAX (insn_needs.op_addr.groups[i], + insn_needs.op_addr_reload.groups[i]), + in_max); + out_max = MAX (out_max, insn_needs.insn.groups[i]); + + insn_needs.input.groups[i] + = MAX (insn_needs.input.groups[i] + + insn_needs.op_addr.groups[i] + + insn_needs.insn.groups[i], + in_max + insn_needs.input.groups[i]); + + insn_needs.output.groups[i] += out_max; + insn_needs.other.groups[i] + += MAX (MAX (insn_needs.input.groups[i], + insn_needs.output.groups[i]), + insn_needs.other_addr.groups[i]); + } + + /* If this is a CALL_INSN and caller-saves will need + a spill register, act as if the spill register is + needed for this insn. However, the spill register + can be used by any reload of this insn, so we only + need do something if no need for that class has + been recorded. + + The assumption that every CALL_INSN will trigger a + caller-save is highly conservative, however, the number + of cases where caller-saves will need a spill register but + a block containing a CALL_INSN won't need a spill register + of that class should be quite rare. + + If a group is needed, the size and mode of the group will + have been set up at the beginning of this loop. */ + + if (GET_CODE (insn) == CALL_INSN + && caller_save_spill_class != NO_REGS) + { + /* See if this register would conflict with any reload + that needs a group. */ + int nongroup_need = 0; + int *caller_save_needs; + + for (j = 0; j < n_reloads; j++) + if ((CLASS_MAX_NREGS (reload_reg_class[j], + (GET_MODE_SIZE (reload_outmode[j]) + > GET_MODE_SIZE (reload_inmode[j])) + ? reload_outmode[j] + : reload_inmode[j]) + > 1) + && reg_classes_intersect_p (caller_save_spill_class, + reload_reg_class[j])) + { + nongroup_need = 1; + break; + } + + caller_save_needs + = (caller_save_group_size > 1 + ? insn_needs.other.groups + : insn_needs.other.regs[nongroup_need]); + + if (caller_save_needs[(int) caller_save_spill_class] == 0) + { + register enum reg_class *p + = reg_class_superclasses[(int) caller_save_spill_class]; + + caller_save_needs[(int) caller_save_spill_class]++; + + while (*p != LIM_REG_CLASSES) + caller_save_needs[(int) *p++] += 1; + } + + /* Show that this basic block will need a register of + this class. */ + + if (global + && ! (basic_block_needs[(int) caller_save_spill_class] + [this_block])) + { + basic_block_needs[(int) caller_save_spill_class] + [this_block] = 1; + new_basic_block_needs = 1; + } + } + +#ifdef SMALL_REGISTER_CLASSES + /* If this insn stores the value of a function call, + and that value is in a register that has been spilled, + and if the insn needs a reload in a class + that might use that register as the reload register, + then add add an extra need in that class. + This makes sure we have a register available that does + not overlap the return value. */ + + if (avoid_return_reg) + { + int regno = REGNO (avoid_return_reg); + int nregs + = HARD_REGNO_NREGS (regno, GET_MODE (avoid_return_reg)); + int r; + int basic_needs[N_REG_CLASSES], basic_groups[N_REG_CLASSES]; + + /* First compute the "basic needs", which counts a + need only in the smallest class in which it + is required. */ + + bcopy (insn_needs.other.regs[0], basic_needs, + sizeof basic_needs); + bcopy (insn_needs.other.groups, basic_groups, + sizeof basic_groups); + + for (i = 0; i < N_REG_CLASSES; i++) + { + enum reg_class *p; + + if (basic_needs[i] >= 0) + for (p = reg_class_superclasses[i]; + *p != LIM_REG_CLASSES; p++) + basic_needs[(int) *p] -= basic_needs[i]; + + if (basic_groups[i] >= 0) + for (p = reg_class_superclasses[i]; + *p != LIM_REG_CLASSES; p++) + basic_groups[(int) *p] -= basic_groups[i]; + } + + /* Now count extra regs if there might be a conflict with + the return value register. + + ??? This is not quite correct because we don't properly + handle the case of groups, but if we end up doing + something wrong, it either will end up not mattering or + we will abort elsewhere. */ + + for (r = regno; r < regno + nregs; r++) + if (spill_reg_order[r] >= 0) + for (i = 0; i < N_REG_CLASSES; i++) + if (TEST_HARD_REG_BIT (reg_class_contents[i], r)) + { + if (basic_needs[i] > 0 || basic_groups[i] > 0) + { + enum reg_class *p; + + insn_needs.other.regs[0][i]++; + p = reg_class_superclasses[i]; + while (*p != LIM_REG_CLASSES) + insn_needs.other.regs[0][(int) *p++]++; + } + } + } +#endif /* SMALL_REGISTER_CLASSES */ + + /* For each class, collect maximum need of any insn. */ + + for (i = 0; i < N_REG_CLASSES; i++) + { + if (max_needs[i] < insn_needs.other.regs[0][i]) + { + max_needs[i] = insn_needs.other.regs[0][i]; + max_needs_insn[i] = insn; + } + if (max_groups[i] < insn_needs.other.groups[i]) + { + max_groups[i] = insn_needs.other.groups[i]; + max_groups_insn[i] = insn; + } + if (max_nongroups[i] < insn_needs.other.regs[1][i]) + { + max_nongroups[i] = insn_needs.other.regs[1][i]; + max_nongroups_insn[i] = insn; + } + } + } + /* Note that there is a continue statement above. */ + } + + /* If we allocated any new memory locations, make another pass + since it might have changed elimination offsets. */ + if (starting_frame_size != get_frame_size ()) + something_changed = 1; + + if (dumpfile) + for (i = 0; i < N_REG_CLASSES; i++) + { + if (max_needs[i] > 0) + fprintf (dumpfile, + ";; Need %d reg%s of class %s (for insn %d).\n", + max_needs[i], max_needs[i] == 1 ? "" : "s", + reg_class_names[i], INSN_UID (max_needs_insn[i])); + if (max_nongroups[i] > 0) + fprintf (dumpfile, + ";; Need %d nongroup reg%s of class %s (for insn %d).\n", + max_nongroups[i], max_nongroups[i] == 1 ? "" : "s", + reg_class_names[i], INSN_UID (max_nongroups_insn[i])); + if (max_groups[i] > 0) + fprintf (dumpfile, + ";; Need %d group%s (%smode) of class %s (for insn %d).\n", + max_groups[i], max_groups[i] == 1 ? "" : "s", + mode_name[(int) group_mode[i]], + reg_class_names[i], INSN_UID (max_groups_insn[i])); + } + + /* If we have caller-saves, set up the save areas and see if caller-save + will need a spill register. */ + + if (caller_save_needed + && ! setup_save_areas (&something_changed) + && caller_save_spill_class == NO_REGS) + { + /* The class we will need depends on whether the machine + supports the sum of two registers for an address; see + find_address_reloads for details. */ + + caller_save_spill_class + = double_reg_address_ok ? INDEX_REG_CLASS : BASE_REG_CLASS; + caller_save_group_size + = CLASS_MAX_NREGS (caller_save_spill_class, Pmode); + something_changed = 1; + } + + /* See if anything that happened changes which eliminations are valid. + For example, on the Sparc, whether or not the frame pointer can + be eliminated can depend on what registers have been used. We need + not check some conditions again (such as flag_omit_frame_pointer) + since they can't have changed. */ + + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++) + if ((ep->from == HARD_FRAME_POINTER_REGNUM && FRAME_POINTER_REQUIRED) +#ifdef ELIMINABLE_REGS + || ! CAN_ELIMINATE (ep->from, ep->to) +#endif + ) + ep->can_eliminate = 0; + + /* Look for the case where we have discovered that we can't replace + register A with register B and that means that we will now be + trying to replace register A with register C. This means we can + no longer replace register C with register B and we need to disable + such an elimination, if it exists. This occurs often with A == ap, + B == sp, and C == fp. */ + + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++) + { + struct elim_table *op; + register int new_to = -1; + + if (! ep->can_eliminate && ep->can_eliminate_previous) + { + /* Find the current elimination for ep->from, if there is a + new one. */ + for (op = reg_eliminate; + op < ®_eliminate[NUM_ELIMINABLE_REGS]; op++) + if (op->from == ep->from && op->can_eliminate) + { + new_to = op->to; + break; + } + + /* See if there is an elimination of NEW_TO -> EP->TO. If so, + disable it. */ + for (op = reg_eliminate; + op < ®_eliminate[NUM_ELIMINABLE_REGS]; op++) + if (op->from == new_to && op->to == ep->to) + op->can_eliminate = 0; + } + } + + /* See if any registers that we thought we could eliminate the previous + time are no longer eliminable. If so, something has changed and we + must spill the register. Also, recompute the number of eliminable + registers and see if the frame pointer is needed; it is if there is + no elimination of the frame pointer that we can perform. */ + + frame_pointer_needed = 1; + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++) + { + if (ep->can_eliminate && ep->from == FRAME_POINTER_REGNUM + && ep->to != HARD_FRAME_POINTER_REGNUM) + frame_pointer_needed = 0; + + if (! ep->can_eliminate && ep->can_eliminate_previous) + { + ep->can_eliminate_previous = 0; + spill_hard_reg (ep->from, global, dumpfile, 1); + something_changed = 1; + num_eliminable--; + } + } + +#if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM + /* If we didn't need a frame pointer last time, but we do now, spill + the hard frame pointer. */ + if (frame_pointer_needed && ! previous_frame_pointer_needed) + { + spill_hard_reg (HARD_FRAME_POINTER_REGNUM, global, dumpfile, 1); + something_changed = 1; + } +#endif + + /* If all needs are met, we win. */ + + for (i = 0; i < N_REG_CLASSES; i++) + if (max_needs[i] > 0 || max_groups[i] > 0 || max_nongroups[i] > 0) + break; + if (i == N_REG_CLASSES && !new_basic_block_needs && ! something_changed) + break; + + /* Not all needs are met; must spill some hard regs. */ + + /* Put all registers spilled so far back in potential_reload_regs, but + put them at the front, since we've already spilled most of the + psuedos in them (we might have left some pseudos unspilled if they + were in a block that didn't need any spill registers of a conflicting + class. We used to try to mark off the need for those registers, + but doing so properly is very complex and reallocating them is the + simpler approach. First, "pack" potential_reload_regs by pushing + any nonnegative entries towards the end. That will leave room + for the registers we already spilled. + + Also, undo the marking of the spill registers from the last time + around in FORBIDDEN_REGS since we will be probably be allocating + them again below. + + ??? It is theoretically possible that we might end up not using one + of our previously-spilled registers in this allocation, even though + they are at the head of the list. It's not clear what to do about + this, but it was no better before, when we marked off the needs met + by the previously-spilled registers. With the current code, globals + can be allocated into these registers, but locals cannot. */ + + if (n_spills) + { + for (i = j = FIRST_PSEUDO_REGISTER - 1; i >= 0; i--) + if (potential_reload_regs[i] != -1) + potential_reload_regs[j--] = potential_reload_regs[i]; + + for (i = 0; i < n_spills; i++) + { + potential_reload_regs[i] = spill_regs[i]; + spill_reg_order[spill_regs[i]] = -1; + CLEAR_HARD_REG_BIT (forbidden_regs, spill_regs[i]); + } + + n_spills = 0; + } + + /* Now find more reload regs to satisfy the remaining need + Do it by ascending class number, since otherwise a reg + might be spilled for a big class and might fail to count + for a smaller class even though it belongs to that class. + + Count spilled regs in `spills', and add entries to + `spill_regs' and `spill_reg_order'. + + ??? Note there is a problem here. + When there is a need for a group in a high-numbered class, + and also need for non-group regs that come from a lower class, + the non-group regs are chosen first. If there aren't many regs, + they might leave no room for a group. + + This was happening on the 386. To fix it, we added the code + that calls possible_group_p, so that the lower class won't + break up the last possible group. + + Really fixing the problem would require changes above + in counting the regs already spilled, and in choose_reload_regs. + It might be hard to avoid introducing bugs there. */ + + CLEAR_HARD_REG_SET (counted_for_groups); + CLEAR_HARD_REG_SET (counted_for_nongroups); + + for (class = 0; class < N_REG_CLASSES; class++) + { + /* First get the groups of registers. + If we got single registers first, we might fragment + possible groups. */ + while (max_groups[class] > 0) + { + /* If any single spilled regs happen to form groups, + count them now. Maybe we don't really need + to spill another group. */ + count_possible_groups (group_size, group_mode, max_groups); + + if (max_groups[class] <= 0) + break; + + /* Groups of size 2 (the only groups used on most machines) + are treated specially. */ + if (group_size[class] == 2) + { + /* First, look for a register that will complete a group. */ + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + { + int other; + + j = potential_reload_regs[i]; + if (j >= 0 && ! TEST_HARD_REG_BIT (bad_spill_regs, j) + && + ((j > 0 && (other = j - 1, spill_reg_order[other] >= 0) + && TEST_HARD_REG_BIT (reg_class_contents[class], j) + && TEST_HARD_REG_BIT (reg_class_contents[class], other) + && HARD_REGNO_MODE_OK (other, group_mode[class]) + && ! TEST_HARD_REG_BIT (counted_for_nongroups, + other) + /* We don't want one part of another group. + We could get "two groups" that overlap! */ + && ! TEST_HARD_REG_BIT (counted_for_groups, other)) + || + (j < FIRST_PSEUDO_REGISTER - 1 + && (other = j + 1, spill_reg_order[other] >= 0) + && TEST_HARD_REG_BIT (reg_class_contents[class], j) + && TEST_HARD_REG_BIT (reg_class_contents[class], other) + && HARD_REGNO_MODE_OK (j, group_mode[class]) + && ! TEST_HARD_REG_BIT (counted_for_nongroups, + other) + && ! TEST_HARD_REG_BIT (counted_for_groups, + other)))) + { + register enum reg_class *p; + + /* We have found one that will complete a group, + so count off one group as provided. */ + max_groups[class]--; + p = reg_class_superclasses[class]; + while (*p != LIM_REG_CLASSES) + max_groups[(int) *p++]--; + + /* Indicate both these regs are part of a group. */ + SET_HARD_REG_BIT (counted_for_groups, j); + SET_HARD_REG_BIT (counted_for_groups, other); + break; + } + } + /* We can't complete a group, so start one. */ +#ifdef SMALL_REGISTER_CLASSES + /* Look for a pair neither of which is explicitly used. */ + if (i == FIRST_PSEUDO_REGISTER) + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + { + int k; + j = potential_reload_regs[i]; + /* Verify that J+1 is a potential reload reg. */ + for (k = 0; k < FIRST_PSEUDO_REGISTER; k++) + if (potential_reload_regs[k] == j + 1) + break; + if (j >= 0 && j + 1 < FIRST_PSEUDO_REGISTER + && k < FIRST_PSEUDO_REGISTER + && spill_reg_order[j] < 0 && spill_reg_order[j + 1] < 0 + && TEST_HARD_REG_BIT (reg_class_contents[class], j) + && TEST_HARD_REG_BIT (reg_class_contents[class], j + 1) + && HARD_REGNO_MODE_OK (j, group_mode[class]) + && ! TEST_HARD_REG_BIT (counted_for_nongroups, + j + 1) + && ! TEST_HARD_REG_BIT (bad_spill_regs, j + 1) + /* Reject J at this stage + if J+1 was explicitly used. */ + && ! regs_explicitly_used[j + 1]) + break; + } +#endif + /* Now try any group at all + whose registers are not in bad_spill_regs. */ + if (i == FIRST_PSEUDO_REGISTER) + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + { + int k; + j = potential_reload_regs[i]; + /* Verify that J+1 is a potential reload reg. */ + for (k = 0; k < FIRST_PSEUDO_REGISTER; k++) + if (potential_reload_regs[k] == j + 1) + break; + if (j >= 0 && j + 1 < FIRST_PSEUDO_REGISTER + && k < FIRST_PSEUDO_REGISTER + && spill_reg_order[j] < 0 && spill_reg_order[j + 1] < 0 + && TEST_HARD_REG_BIT (reg_class_contents[class], j) + && TEST_HARD_REG_BIT (reg_class_contents[class], j + 1) + && HARD_REGNO_MODE_OK (j, group_mode[class]) + && ! TEST_HARD_REG_BIT (counted_for_nongroups, + j + 1) + && ! TEST_HARD_REG_BIT (bad_spill_regs, j + 1)) + break; + } + + /* I should be the index in potential_reload_regs + of the new reload reg we have found. */ + + if (i >= FIRST_PSEUDO_REGISTER) + { + /* There are no groups left to spill. */ + spill_failure (max_groups_insn[class]); + failure = 1; + goto failed; + } + else + something_changed + |= new_spill_reg (i, class, max_needs, NULL_PTR, + global, dumpfile); + } + else + { + /* For groups of more than 2 registers, + look for a sufficient sequence of unspilled registers, + and spill them all at once. */ + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + { + int k; + + j = potential_reload_regs[i]; + if (j >= 0 + && j + group_size[class] <= FIRST_PSEUDO_REGISTER + && HARD_REGNO_MODE_OK (j, group_mode[class])) + { + /* Check each reg in the sequence. */ + for (k = 0; k < group_size[class]; k++) + if (! (spill_reg_order[j + k] < 0 + && ! TEST_HARD_REG_BIT (bad_spill_regs, j + k) + && TEST_HARD_REG_BIT (reg_class_contents[class], j + k))) + break; + /* We got a full sequence, so spill them all. */ + if (k == group_size[class]) + { + register enum reg_class *p; + for (k = 0; k < group_size[class]; k++) + { + int idx; + SET_HARD_REG_BIT (counted_for_groups, j + k); + for (idx = 0; idx < FIRST_PSEUDO_REGISTER; idx++) + if (potential_reload_regs[idx] == j + k) + break; + something_changed + |= new_spill_reg (idx, class, + max_needs, NULL_PTR, + global, dumpfile); + } + + /* We have found one that will complete a group, + so count off one group as provided. */ + max_groups[class]--; + p = reg_class_superclasses[class]; + while (*p != LIM_REG_CLASSES) + max_groups[(int) *p++]--; + + break; + } + } + } + /* We couldn't find any registers for this reload. + Avoid going into an infinite loop. */ + if (i >= FIRST_PSEUDO_REGISTER) + { + /* There are no groups left. */ + spill_failure (max_groups_insn[class]); + failure = 1; + goto failed; + } + } + } + + /* Now similarly satisfy all need for single registers. */ + + while (max_needs[class] > 0 || max_nongroups[class] > 0) + { +#ifdef SMALL_REGISTER_CLASSES + /* This should be right for all machines, but only the 386 + is known to need it, so this conditional plays safe. + ??? For 2.5, try making this unconditional. */ + /* If we spilled enough regs, but they weren't counted + against the non-group need, see if we can count them now. + If so, we can avoid some actual spilling. */ + if (max_needs[class] <= 0 && max_nongroups[class] > 0) + for (i = 0; i < n_spills; i++) + if (TEST_HARD_REG_BIT (reg_class_contents[class], + spill_regs[i]) + && !TEST_HARD_REG_BIT (counted_for_groups, + spill_regs[i]) + && !TEST_HARD_REG_BIT (counted_for_nongroups, + spill_regs[i]) + && max_nongroups[class] > 0) + { + register enum reg_class *p; + + SET_HARD_REG_BIT (counted_for_nongroups, spill_regs[i]); + max_nongroups[class]--; + p = reg_class_superclasses[class]; + while (*p != LIM_REG_CLASSES) + max_nongroups[(int) *p++]--; + } + if (max_needs[class] <= 0 && max_nongroups[class] <= 0) + break; +#endif + + /* Consider the potential reload regs that aren't + yet in use as reload regs, in order of preference. + Find the most preferred one that's in this class. */ + + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + if (potential_reload_regs[i] >= 0 + && TEST_HARD_REG_BIT (reg_class_contents[class], + potential_reload_regs[i]) + /* If this reg will not be available for groups, + pick one that does not foreclose possible groups. + This is a kludge, and not very general, + but it should be sufficient to make the 386 work, + and the problem should not occur on machines with + more registers. */ + && (max_nongroups[class] == 0 + || possible_group_p (potential_reload_regs[i], max_groups))) + break; + + /* If we couldn't get a register, try to get one even if we + might foreclose possible groups. This may cause problems + later, but that's better than aborting now, since it is + possible that we will, in fact, be able to form the needed + group even with this allocation. */ + + if (i >= FIRST_PSEUDO_REGISTER + && (asm_noperands (max_needs[class] > 0 + ? max_needs_insn[class] + : max_nongroups_insn[class]) + < 0)) + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + if (potential_reload_regs[i] >= 0 + && TEST_HARD_REG_BIT (reg_class_contents[class], + potential_reload_regs[i])) + break; + + /* I should be the index in potential_reload_regs + of the new reload reg we have found. */ + + if (i >= FIRST_PSEUDO_REGISTER) + { + /* There are no possible registers left to spill. */ + spill_failure (max_needs[class] > 0 ? max_needs_insn[class] + : max_nongroups_insn[class]); + failure = 1; + goto failed; + } + else + something_changed + |= new_spill_reg (i, class, max_needs, max_nongroups, + global, dumpfile); + } + } + } + + /* If global-alloc was run, notify it of any register eliminations we have + done. */ + if (global) + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++) + if (ep->can_eliminate) + mark_elimination (ep->from, ep->to); + + /* Insert code to save and restore call-clobbered hard regs + around calls. Tell if what mode to use so that we will process + those insns in reload_as_needed if we have to. */ + + if (caller_save_needed) + save_call_clobbered_regs (num_eliminable ? QImode + : caller_save_spill_class != NO_REGS ? HImode + : VOIDmode); + + /* If a pseudo has no hard reg, delete the insns that made the equivalence. + If that insn didn't set the register (i.e., it copied the register to + memory), just delete that insn instead of the equivalencing insn plus + anything now dead. If we call delete_dead_insn on that insn, we may + delete the insn that actually sets the register if the register die + there and that is incorrect. */ + + for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++) + if (reg_renumber[i] < 0 && reg_equiv_init[i] != 0 + && GET_CODE (reg_equiv_init[i]) != NOTE) + { + if (reg_set_p (regno_reg_rtx[i], PATTERN (reg_equiv_init[i]))) + delete_dead_insn (reg_equiv_init[i]); + else + { + PUT_CODE (reg_equiv_init[i], NOTE); + NOTE_SOURCE_FILE (reg_equiv_init[i]) = 0; + NOTE_LINE_NUMBER (reg_equiv_init[i]) = NOTE_INSN_DELETED; + } + } + + /* Use the reload registers where necessary + by generating move instructions to move the must-be-register + values into or out of the reload registers. */ + + if (something_needs_reloads || something_needs_elimination + || (caller_save_needed && num_eliminable) + || caller_save_spill_class != NO_REGS) + reload_as_needed (first, global); + + /* If we were able to eliminate the frame pointer, show that it is no + longer live at the start of any basic block. If it ls live by + virtue of being in a pseudo, that pseudo will be marked live + and hence the frame pointer will be known to be live via that + pseudo. */ + + if (! frame_pointer_needed) + for (i = 0; i < n_basic_blocks; i++) + basic_block_live_at_start[i][HARD_FRAME_POINTER_REGNUM / REGSET_ELT_BITS] + &= ~ ((REGSET_ELT_TYPE) 1 << (HARD_FRAME_POINTER_REGNUM + % REGSET_ELT_BITS)); + + /* Come here (with failure set nonzero) if we can't get enough spill regs + and we decide not to abort about it. */ + failed: + + reload_in_progress = 0; + + /* Now eliminate all pseudo regs by modifying them into + their equivalent memory references. + The REG-rtx's for the pseudos are modified in place, + so all insns that used to refer to them now refer to memory. + + For a reg that has a reg_equiv_address, all those insns + were changed by reloading so that no insns refer to it any longer; + but the DECL_RTL of a variable decl may refer to it, + and if so this causes the debugging info to mention the variable. */ + + for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++) + { + rtx addr = 0; + int in_struct = 0; + if (reg_equiv_mem[i]) + { + addr = XEXP (reg_equiv_mem[i], 0); + in_struct = MEM_IN_STRUCT_P (reg_equiv_mem[i]); + } + if (reg_equiv_address[i]) + addr = reg_equiv_address[i]; + if (addr) + { + if (reg_renumber[i] < 0) + { + rtx reg = regno_reg_rtx[i]; + XEXP (reg, 0) = addr; + REG_USERVAR_P (reg) = 0; + MEM_IN_STRUCT_P (reg) = in_struct; + PUT_CODE (reg, MEM); + } + else if (reg_equiv_mem[i]) + XEXP (reg_equiv_mem[i], 0) = addr; + } + } + +#ifdef PRESERVE_DEATH_INFO_REGNO_P + /* Make a pass over all the insns and remove death notes for things that + are no longer registers or no longer die in the insn (e.g., an input + and output pseudo being tied). */ + + for (insn = first; insn; insn = NEXT_INSN (insn)) + if (GET_RTX_CLASS (GET_CODE (insn)) == 'i') + { + rtx note, next; + + for (note = REG_NOTES (insn); note; note = next) + { + next = XEXP (note, 1); + if (REG_NOTE_KIND (note) == REG_DEAD + && (GET_CODE (XEXP (note, 0)) != REG + || reg_set_p (XEXP (note, 0), PATTERN (insn)))) + remove_note (insn, note); + } + } +#endif + + /* Indicate that we no longer have known memory locations or constants. */ + reg_equiv_constant = 0; + reg_equiv_memory_loc = 0; + + if (scratch_list) + free (scratch_list); + scratch_list = 0; + if (scratch_block) + free (scratch_block); + scratch_block = 0; + + return failure; +} + +/* Nonzero if, after spilling reg REGNO for non-groups, + it will still be possible to find a group if we still need one. */ + +static int +possible_group_p (regno, max_groups) + int regno; + int *max_groups; +{ + int i; + int class = (int) NO_REGS; + + for (i = 0; i < (int) N_REG_CLASSES; i++) + if (max_groups[i] > 0) + { + class = i; + break; + } + + if (class == (int) NO_REGS) + return 1; + + /* Consider each pair of consecutive registers. */ + for (i = 0; i < FIRST_PSEUDO_REGISTER - 1; i++) + { + /* Ignore pairs that include reg REGNO. */ + if (i == regno || i + 1 == regno) + continue; + + /* Ignore pairs that are outside the class that needs the group. + ??? Here we fail to handle the case where two different classes + independently need groups. But this never happens with our + current machine descriptions. */ + if (! (TEST_HARD_REG_BIT (reg_class_contents[class], i) + && TEST_HARD_REG_BIT (reg_class_contents[class], i + 1))) + continue; + + /* A pair of consecutive regs we can still spill does the trick. */ + if (spill_reg_order[i] < 0 && spill_reg_order[i + 1] < 0 + && ! TEST_HARD_REG_BIT (bad_spill_regs, i) + && ! TEST_HARD_REG_BIT (bad_spill_regs, i + 1)) + return 1; + + /* A pair of one already spilled and one we can spill does it + provided the one already spilled is not otherwise reserved. */ + if (spill_reg_order[i] < 0 + && ! TEST_HARD_REG_BIT (bad_spill_regs, i) + && spill_reg_order[i + 1] >= 0 + && ! TEST_HARD_REG_BIT (counted_for_groups, i + 1) + && ! TEST_HARD_REG_BIT (counted_for_nongroups, i + 1)) + return 1; + if (spill_reg_order[i + 1] < 0 + && ! TEST_HARD_REG_BIT (bad_spill_regs, i + 1) + && spill_reg_order[i] >= 0 + && ! TEST_HARD_REG_BIT (counted_for_groups, i) + && ! TEST_HARD_REG_BIT (counted_for_nongroups, i)) + return 1; + } + + return 0; +} + +/* Count any groups that can be formed from the registers recently spilled. + This is done class by class, in order of ascending class number. */ + +static void +count_possible_groups (group_size, group_mode, max_groups) + int *group_size; + enum machine_mode *group_mode; + int *max_groups; +{ + int i; + /* Now find all consecutive groups of spilled registers + and mark each group off against the need for such groups. + But don't count them against ordinary need, yet. */ + + for (i = 0; i < N_REG_CLASSES; i++) + if (group_size[i] > 1) + { + HARD_REG_SET new; + int j; + + CLEAR_HARD_REG_SET (new); + + /* Make a mask of all the regs that are spill regs in class I. */ + for (j = 0; j < n_spills; j++) + if (TEST_HARD_REG_BIT (reg_class_contents[i], spill_regs[j]) + && ! TEST_HARD_REG_BIT (counted_for_groups, spill_regs[j]) + && ! TEST_HARD_REG_BIT (counted_for_nongroups, + spill_regs[j])) + SET_HARD_REG_BIT (new, spill_regs[j]); + + /* Find each consecutive group of them. */ + for (j = 0; j < FIRST_PSEUDO_REGISTER && max_groups[i] > 0; j++) + if (TEST_HARD_REG_BIT (new, j) + && j + group_size[i] <= FIRST_PSEUDO_REGISTER + /* Next line in case group-mode for this class + demands an even-odd pair. */ + && HARD_REGNO_MODE_OK (j, group_mode[i])) + { + int k; + for (k = 1; k < group_size[i]; k++) + if (! TEST_HARD_REG_BIT (new, j + k)) + break; + if (k == group_size[i]) + { + /* We found a group. Mark it off against this class's + need for groups, and against each superclass too. */ + register enum reg_class *p; + max_groups[i]--; + p = reg_class_superclasses[i]; + while (*p != LIM_REG_CLASSES) + max_groups[(int) *p++]--; + /* Don't count these registers again. */ + for (k = 0; k < group_size[i]; k++) + SET_HARD_REG_BIT (counted_for_groups, j + k); + } + /* Skip to the last reg in this group. When j is incremented + above, it will then point to the first reg of the next + possible group. */ + j += k - 1; + } + } + +} + +/* ALLOCATE_MODE is a register mode that needs to be reloaded. OTHER_MODE is + another mode that needs to be reloaded for the same register class CLASS. + If any reg in CLASS allows ALLOCATE_MODE but not OTHER_MODE, fail. + ALLOCATE_MODE will never be smaller than OTHER_MODE. + + This code used to also fail if any reg in CLASS allows OTHER_MODE but not + ALLOCATE_MODE. This test is unnecessary, because we will never try to put + something of mode ALLOCATE_MODE into an OTHER_MODE register. Testing this + causes unnecessary failures on machines requiring alignment of register + groups when the two modes are different sizes, because the larger mode has + more strict alignment rules than the smaller mode. */ + +static int +modes_equiv_for_class_p (allocate_mode, other_mode, class) + enum machine_mode allocate_mode, other_mode; + enum reg_class class; +{ + register int regno; + for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) + { + if (TEST_HARD_REG_BIT (reg_class_contents[(int) class], regno) + && HARD_REGNO_MODE_OK (regno, allocate_mode) + && ! HARD_REGNO_MODE_OK (regno, other_mode)) + return 0; + } + return 1; +} + +/* Handle the failure to find a register to spill. + INSN should be one of the insns which needed this particular spill reg. */ + +static void +spill_failure (insn) + rtx insn; +{ + if (asm_noperands (PATTERN (insn)) >= 0) + error_for_asm (insn, "`asm' needs too many reloads"); + else + abort (); +} + +/* Add a new register to the tables of available spill-registers + (as well as spilling all pseudos allocated to the register). + I is the index of this register in potential_reload_regs. + CLASS is the regclass whose need is being satisfied. + MAX_NEEDS and MAX_NONGROUPS are the vectors of needs, + so that this register can count off against them. + MAX_NONGROUPS is 0 if this register is part of a group. + GLOBAL and DUMPFILE are the same as the args that `reload' got. */ + +static int +new_spill_reg (i, class, max_needs, max_nongroups, global, dumpfile) + int i; + int class; + int *max_needs; + int *max_nongroups; + int global; + FILE *dumpfile; +{ + register enum reg_class *p; + int val; + int regno = potential_reload_regs[i]; + + if (i >= FIRST_PSEUDO_REGISTER) + abort (); /* Caller failed to find any register. */ + + if (fixed_regs[regno] || TEST_HARD_REG_BIT (forbidden_regs, regno)) + fatal ("fixed or forbidden register was spilled.\n\ +This may be due to a compiler bug or to impossible asm\n\ +statements or clauses."); + + /* Make reg REGNO an additional reload reg. */ + + potential_reload_regs[i] = -1; + spill_regs[n_spills] = regno; + spill_reg_order[regno] = n_spills; + if (dumpfile) + fprintf (dumpfile, "Spilling reg %d.\n", spill_regs[n_spills]); + + /* Clear off the needs we just satisfied. */ + + max_needs[class]--; + p = reg_class_superclasses[class]; + while (*p != LIM_REG_CLASSES) + max_needs[(int) *p++]--; + + if (max_nongroups && max_nongroups[class] > 0) + { + SET_HARD_REG_BIT (counted_for_nongroups, regno); + max_nongroups[class]--; + p = reg_class_superclasses[class]; + while (*p != LIM_REG_CLASSES) + max_nongroups[(int) *p++]--; + } + + /* Spill every pseudo reg that was allocated to this reg + or to something that overlaps this reg. */ + + val = spill_hard_reg (spill_regs[n_spills], global, dumpfile, 0); + + /* If there are some registers still to eliminate and this register + wasn't ever used before, additional stack space may have to be + allocated to store this register. Thus, we may have changed the offset + between the stack and frame pointers, so mark that something has changed. + (If new pseudos were spilled, thus requiring more space, VAL would have + been set non-zero by the call to spill_hard_reg above since additional + reloads may be needed in that case. + + One might think that we need only set VAL to 1 if this is a call-used + register. However, the set of registers that must be saved by the + prologue is not identical to the call-used set. For example, the + register used by the call insn for the return PC is a call-used register, + but must be saved by the prologue. */ + if (num_eliminable && ! regs_ever_live[spill_regs[n_spills]]) + val = 1; + + regs_ever_live[spill_regs[n_spills]] = 1; + n_spills++; + + return val; +} + +/* Delete an unneeded INSN and any previous insns who sole purpose is loading + data that is dead in INSN. */ + +static void +delete_dead_insn (insn) + rtx insn; +{ + rtx prev = prev_real_insn (insn); + rtx prev_dest; + + /* If the previous insn sets a register that dies in our insn, delete it + too. */ + if (prev && GET_CODE (PATTERN (prev)) == SET + && (prev_dest = SET_DEST (PATTERN (prev)), GET_CODE (prev_dest) == REG) + && reg_mentioned_p (prev_dest, PATTERN (insn)) + && find_regno_note (insn, REG_DEAD, REGNO (prev_dest))) + delete_dead_insn (prev); + + PUT_CODE (insn, NOTE); + NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED; + NOTE_SOURCE_FILE (insn) = 0; +} + +/* Modify the home of pseudo-reg I. + The new home is present in reg_renumber[I]. + + FROM_REG may be the hard reg that the pseudo-reg is being spilled from; + or it may be -1, meaning there is none or it is not relevant. + This is used so that all pseudos spilled from a given hard reg + can share one stack slot. */ + +static void +alter_reg (i, from_reg) + register int i; + int from_reg; +{ + /* When outputting an inline function, this can happen + for a reg that isn't actually used. */ + if (regno_reg_rtx[i] == 0) + return; + + /* If the reg got changed to a MEM at rtl-generation time, + ignore it. */ + if (GET_CODE (regno_reg_rtx[i]) != REG) + return; + + /* Modify the reg-rtx to contain the new hard reg + number or else to contain its pseudo reg number. */ + REGNO (regno_reg_rtx[i]) + = reg_renumber[i] >= 0 ? reg_renumber[i] : i; + + /* If we have a pseudo that is needed but has no hard reg or equivalent, + allocate a stack slot for it. */ + + if (reg_renumber[i] < 0 + && reg_n_refs[i] > 0 + && reg_equiv_constant[i] == 0 + && reg_equiv_memory_loc[i] == 0) + { + register rtx x; + int inherent_size = PSEUDO_REGNO_BYTES (i); + int total_size = MAX (inherent_size, reg_max_ref_width[i]); + int adjust = 0; + + /* Each pseudo reg has an inherent size which comes from its own mode, + and a total size which provides room for paradoxical subregs + which refer to the pseudo reg in wider modes. + + We can use a slot already allocated if it provides both + enough inherent space and enough total space. + Otherwise, we allocate a new slot, making sure that it has no less + inherent space, and no less total space, then the previous slot. */ + if (from_reg == -1) + { + /* No known place to spill from => no slot to reuse. */ + x = assign_stack_local (GET_MODE (regno_reg_rtx[i]), total_size, -1); +#if BYTES_BIG_ENDIAN + /* Cancel the big-endian correction done in assign_stack_local. + Get the address of the beginning of the slot. + This is so we can do a big-endian correction unconditionally + below. */ + adjust = inherent_size - total_size; +#endif + } + /* Reuse a stack slot if possible. */ + else if (spill_stack_slot[from_reg] != 0 + && spill_stack_slot_width[from_reg] >= total_size + && (GET_MODE_SIZE (GET_MODE (spill_stack_slot[from_reg])) + >= inherent_size)) + x = spill_stack_slot[from_reg]; + /* Allocate a bigger slot. */ + else + { + /* Compute maximum size needed, both for inherent size + and for total size. */ + enum machine_mode mode = GET_MODE (regno_reg_rtx[i]); + if (spill_stack_slot[from_reg]) + { + if (GET_MODE_SIZE (GET_MODE (spill_stack_slot[from_reg])) + > inherent_size) + mode = GET_MODE (spill_stack_slot[from_reg]); + if (spill_stack_slot_width[from_reg] > total_size) + total_size = spill_stack_slot_width[from_reg]; + } + /* Make a slot with that size. */ + x = assign_stack_local (mode, total_size, -1); +#if BYTES_BIG_ENDIAN + /* Cancel the big-endian correction done in assign_stack_local. + Get the address of the beginning of the slot. + This is so we can do a big-endian correction unconditionally + below. */ + adjust = GET_MODE_SIZE (mode) - total_size; +#endif + spill_stack_slot[from_reg] = x; + spill_stack_slot_width[from_reg] = total_size; + } + +#if BYTES_BIG_ENDIAN + /* On a big endian machine, the "address" of the slot + is the address of the low part that fits its inherent mode. */ + if (inherent_size < total_size) + adjust += (total_size - inherent_size); +#endif /* BYTES_BIG_ENDIAN */ + + /* If we have any adjustment to make, or if the stack slot is the + wrong mode, make a new stack slot. */ + if (adjust != 0 || GET_MODE (x) != GET_MODE (regno_reg_rtx[i])) + { + x = gen_rtx (MEM, GET_MODE (regno_reg_rtx[i]), + plus_constant (XEXP (x, 0), adjust)); + RTX_UNCHANGING_P (x) = RTX_UNCHANGING_P (regno_reg_rtx[i]); + } + + /* Save the stack slot for later. */ + reg_equiv_memory_loc[i] = x; + } +} + +/* Mark the slots in regs_ever_live for the hard regs + used by pseudo-reg number REGNO. */ + +void +mark_home_live (regno) + int regno; +{ + register int i, lim; + i = reg_renumber[regno]; + if (i < 0) + return; + lim = i + HARD_REGNO_NREGS (i, PSEUDO_REGNO_MODE (regno)); + while (i < lim) + regs_ever_live[i++] = 1; +} + +/* Mark the registers used in SCRATCH as being live. */ + +static void +mark_scratch_live (scratch) + rtx scratch; +{ + register int i; + int regno = REGNO (scratch); + int lim = regno + HARD_REGNO_NREGS (regno, GET_MODE (scratch)); + + for (i = regno; i < lim; i++) + regs_ever_live[i] = 1; +} + +/* This function handles the tracking of elimination offsets around branches. + + X is a piece of RTL being scanned. + + INSN is the insn that it came from, if any. + + INITIAL_P is non-zero if we are to set the offset to be the initial + offset and zero if we are setting the offset of the label to be the + current offset. */ + +static void +set_label_offsets (x, insn, initial_p) + rtx x; + rtx insn; + int initial_p; +{ + enum rtx_code code = GET_CODE (x); + rtx tem; + int i; + struct elim_table *p; + + switch (code) + { + case LABEL_REF: + if (LABEL_REF_NONLOCAL_P (x)) + return; + + x = XEXP (x, 0); + + /* ... fall through ... */ + + case CODE_LABEL: + /* If we know nothing about this label, set the desired offsets. Note + that this sets the offset at a label to be the offset before a label + if we don't know anything about the label. This is not correct for + the label after a BARRIER, but is the best guess we can make. If + we guessed wrong, we will suppress an elimination that might have + been possible had we been able to guess correctly. */ + + if (! offsets_known_at[CODE_LABEL_NUMBER (x)]) + { + for (i = 0; i < NUM_ELIMINABLE_REGS; i++) + offsets_at[CODE_LABEL_NUMBER (x)][i] + = (initial_p ? reg_eliminate[i].initial_offset + : reg_eliminate[i].offset); + offsets_known_at[CODE_LABEL_NUMBER (x)] = 1; + } + + /* Otherwise, if this is the definition of a label and it is + preceded by a BARRIER, set our offsets to the known offset of + that label. */ + + else if (x == insn + && (tem = prev_nonnote_insn (insn)) != 0 + && GET_CODE (tem) == BARRIER) + { + num_not_at_initial_offset = 0; + for (i = 0; i < NUM_ELIMINABLE_REGS; i++) + { + reg_eliminate[i].offset = reg_eliminate[i].previous_offset + = offsets_at[CODE_LABEL_NUMBER (x)][i]; + if (reg_eliminate[i].can_eliminate + && (reg_eliminate[i].offset + != reg_eliminate[i].initial_offset)) + num_not_at_initial_offset++; + } + } + + else + /* If neither of the above cases is true, compare each offset + with those previously recorded and suppress any eliminations + where the offsets disagree. */ + + for (i = 0; i < NUM_ELIMINABLE_REGS; i++) + if (offsets_at[CODE_LABEL_NUMBER (x)][i] + != (initial_p ? reg_eliminate[i].initial_offset + : reg_eliminate[i].offset)) + reg_eliminate[i].can_eliminate = 0; + + return; + + case JUMP_INSN: + set_label_offsets (PATTERN (insn), insn, initial_p); + + /* ... fall through ... */ + + case INSN: + case CALL_INSN: + /* Any labels mentioned in REG_LABEL notes can be branched to indirectly + and hence must have all eliminations at their initial offsets. */ + for (tem = REG_NOTES (x); tem; tem = XEXP (tem, 1)) + if (REG_NOTE_KIND (tem) == REG_LABEL) + set_label_offsets (XEXP (tem, 0), insn, 1); + return; + + case ADDR_VEC: + case ADDR_DIFF_VEC: + /* Each of the labels in the address vector must be at their initial + offsets. We want the first first for ADDR_VEC and the second + field for ADDR_DIFF_VEC. */ + + for (i = 0; i < XVECLEN (x, code == ADDR_DIFF_VEC); i++) + set_label_offsets (XVECEXP (x, code == ADDR_DIFF_VEC, i), + insn, initial_p); + return; + + case SET: + /* We only care about setting PC. If the source is not RETURN, + IF_THEN_ELSE, or a label, disable any eliminations not at + their initial offsets. Similarly if any arm of the IF_THEN_ELSE + isn't one of those possibilities. For branches to a label, + call ourselves recursively. + + Note that this can disable elimination unnecessarily when we have + a non-local goto since it will look like a non-constant jump to + someplace in the current function. This isn't a significant + problem since such jumps will normally be when all elimination + pairs are back to their initial offsets. */ + + if (SET_DEST (x) != pc_rtx) + return; + + switch (GET_CODE (SET_SRC (x))) + { + case PC: + case RETURN: + return; + + case LABEL_REF: + set_label_offsets (XEXP (SET_SRC (x), 0), insn, initial_p); + return; + + case IF_THEN_ELSE: + tem = XEXP (SET_SRC (x), 1); + if (GET_CODE (tem) == LABEL_REF) + set_label_offsets (XEXP (tem, 0), insn, initial_p); + else if (GET_CODE (tem) != PC && GET_CODE (tem) != RETURN) + break; + + tem = XEXP (SET_SRC (x), 2); + if (GET_CODE (tem) == LABEL_REF) + set_label_offsets (XEXP (tem, 0), insn, initial_p); + else if (GET_CODE (tem) != PC && GET_CODE (tem) != RETURN) + break; + return; + } + + /* If we reach here, all eliminations must be at their initial + offset because we are doing a jump to a variable address. */ + for (p = reg_eliminate; p < ®_eliminate[NUM_ELIMINABLE_REGS]; p++) + if (p->offset != p->initial_offset) + p->can_eliminate = 0; + } +} + +/* Used for communication between the next two function to properly share + the vector for an ASM_OPERANDS. */ + +static struct rtvec_def *old_asm_operands_vec, *new_asm_operands_vec; + +/* Scan X and replace any eliminable registers (such as fp) with a + replacement (such as sp), plus an offset. + + MEM_MODE is the mode of an enclosing MEM. We need this to know how + much to adjust a register for, e.g., PRE_DEC. Also, if we are inside a + MEM, we are allowed to replace a sum of a register and the constant zero + with the register, which we cannot do outside a MEM. In addition, we need + to record the fact that a register is referenced outside a MEM. + + If INSN is an insn, it is the insn containing X. If we replace a REG + in a SET_DEST with an equivalent MEM and INSN is non-zero, write a + CLOBBER of the pseudo after INSN so find_equiv_regs will know that + that the REG is being modified. + + Alternatively, INSN may be a note (an EXPR_LIST or INSN_LIST). + That's used when we eliminate in expressions stored in notes. + This means, do not set ref_outside_mem even if the reference + is outside of MEMs. + + If we see a modification to a register we know about, take the + appropriate action (see case SET, below). + + REG_EQUIV_MEM and REG_EQUIV_ADDRESS contain address that have had + replacements done assuming all offsets are at their initial values. If + they are not, or if REG_EQUIV_ADDRESS is nonzero for a pseudo we + encounter, return the actual location so that find_reloads will do + the proper thing. */ + +rtx +eliminate_regs (x, mem_mode, insn) + rtx x; + enum machine_mode mem_mode; + rtx insn; +{ + enum rtx_code code = GET_CODE (x); + struct elim_table *ep; + int regno; + rtx new; + int i, j; + char *fmt; + int copied = 0; + + switch (code) + { + case CONST_INT: + case CONST_DOUBLE: + case CONST: + case SYMBOL_REF: + case CODE_LABEL: + case PC: + case CC0: + case ASM_INPUT: + case ADDR_VEC: + case ADDR_DIFF_VEC: + case RETURN: + return x; + + case REG: + regno = REGNO (x); + + /* First handle the case where we encounter a bare register that + is eliminable. Replace it with a PLUS. */ + if (regno < FIRST_PSEUDO_REGISTER) + { + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; + ep++) + if (ep->from_rtx == x && ep->can_eliminate) + { + if (! mem_mode + /* Refs inside notes don't count for this purpose. */ + && ! (insn != 0 && (GET_CODE (insn) == EXPR_LIST + || GET_CODE (insn) == INSN_LIST))) + ep->ref_outside_mem = 1; + return plus_constant (ep->to_rtx, ep->previous_offset); + } + + } + else if (reg_equiv_memory_loc && reg_equiv_memory_loc[regno] + && (reg_equiv_address[regno] || num_not_at_initial_offset)) + { + /* In this case, find_reloads would attempt to either use an + incorrect address (if something is not at its initial offset) + or substitute an replaced address into an insn (which loses + if the offset is changed by some later action). So we simply + return the replaced stack slot (assuming it is changed by + elimination) and ignore the fact that this is actually a + reference to the pseudo. Ensure we make a copy of the + address in case it is shared. */ + new = eliminate_regs (reg_equiv_memory_loc[regno], + mem_mode, insn); + if (new != reg_equiv_memory_loc[regno]) + { + cannot_omit_stores[regno] = 1; + return copy_rtx (new); + } + } + return x; + + case PLUS: + /* If this is the sum of an eliminable register and a constant, rework + the sum. */ + if (GET_CODE (XEXP (x, 0)) == REG + && REGNO (XEXP (x, 0)) < FIRST_PSEUDO_REGISTER + && CONSTANT_P (XEXP (x, 1))) + { + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; + ep++) + if (ep->from_rtx == XEXP (x, 0) && ep->can_eliminate) + { + if (! mem_mode + /* Refs inside notes don't count for this purpose. */ + && ! (insn != 0 && (GET_CODE (insn) == EXPR_LIST + || GET_CODE (insn) == INSN_LIST))) + ep->ref_outside_mem = 1; + + /* The only time we want to replace a PLUS with a REG (this + occurs when the constant operand of the PLUS is the negative + of the offset) is when we are inside a MEM. We won't want + to do so at other times because that would change the + structure of the insn in a way that reload can't handle. + We special-case the commonest situation in + eliminate_regs_in_insn, so just replace a PLUS with a + PLUS here, unless inside a MEM. */ + if (mem_mode != 0 && GET_CODE (XEXP (x, 1)) == CONST_INT + && INTVAL (XEXP (x, 1)) == - ep->previous_offset) + return ep->to_rtx; + else + return gen_rtx (PLUS, Pmode, ep->to_rtx, + plus_constant (XEXP (x, 1), + ep->previous_offset)); + } + + /* If the register is not eliminable, we are done since the other + operand is a constant. */ + return x; + } + + /* If this is part of an address, we want to bring any constant to the + outermost PLUS. We will do this by doing register replacement in + our operands and seeing if a constant shows up in one of them. + + We assume here this is part of an address (or a "load address" insn) + since an eliminable register is not likely to appear in any other + context. + + If we have (plus (eliminable) (reg)), we want to produce + (plus (plus (replacement) (reg) (const))). If this was part of a + normal add insn, (plus (replacement) (reg)) will be pushed as a + reload. This is the desired action. */ + + { + rtx new0 = eliminate_regs (XEXP (x, 0), mem_mode, insn); + rtx new1 = eliminate_regs (XEXP (x, 1), mem_mode, insn); + + if (new0 != XEXP (x, 0) || new1 != XEXP (x, 1)) + { + /* If one side is a PLUS and the other side is a pseudo that + didn't get a hard register but has a reg_equiv_constant, + we must replace the constant here since it may no longer + be in the position of any operand. */ + if (GET_CODE (new0) == PLUS && GET_CODE (new1) == REG + && REGNO (new1) >= FIRST_PSEUDO_REGISTER + && reg_renumber[REGNO (new1)] < 0 + && reg_equiv_constant != 0 + && reg_equiv_constant[REGNO (new1)] != 0) + new1 = reg_equiv_constant[REGNO (new1)]; + else if (GET_CODE (new1) == PLUS && GET_CODE (new0) == REG + && REGNO (new0) >= FIRST_PSEUDO_REGISTER + && reg_renumber[REGNO (new0)] < 0 + && reg_equiv_constant[REGNO (new0)] != 0) + new0 = reg_equiv_constant[REGNO (new0)]; + + new = form_sum (new0, new1); + + /* As above, if we are not inside a MEM we do not want to + turn a PLUS into something else. We might try to do so here + for an addition of 0 if we aren't optimizing. */ + if (! mem_mode && GET_CODE (new) != PLUS) + return gen_rtx (PLUS, GET_MODE (x), new, const0_rtx); + else + return new; + } + } + return x; + + case MULT: + /* If this is the product of an eliminable register and a + constant, apply the distribute law and move the constant out + so that we have (plus (mult ..) ..). This is needed in order + to keep load-address insns valid. This case is pathalogical. + We ignore the possibility of overflow here. */ + if (GET_CODE (XEXP (x, 0)) == REG + && REGNO (XEXP (x, 0)) < FIRST_PSEUDO_REGISTER + && GET_CODE (XEXP (x, 1)) == CONST_INT) + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; + ep++) + if (ep->from_rtx == XEXP (x, 0) && ep->can_eliminate) + { + if (! mem_mode + /* Refs inside notes don't count for this purpose. */ + && ! (insn != 0 && (GET_CODE (insn) == EXPR_LIST + || GET_CODE (insn) == INSN_LIST))) + ep->ref_outside_mem = 1; + + return + plus_constant (gen_rtx (MULT, Pmode, ep->to_rtx, XEXP (x, 1)), + ep->previous_offset * INTVAL (XEXP (x, 1))); + } + + /* ... fall through ... */ + + case CALL: + case COMPARE: + case MINUS: + case DIV: case UDIV: + case MOD: case UMOD: + case AND: case IOR: case XOR: + case ROTATERT: case ROTATE: + case ASHIFTRT: case LSHIFTRT: case ASHIFT: + case NE: case EQ: + case GE: case GT: case GEU: case GTU: + case LE: case LT: case LEU: case LTU: + { + rtx new0 = eliminate_regs (XEXP (x, 0), mem_mode, insn); + rtx new1 + = XEXP (x, 1) ? eliminate_regs (XEXP (x, 1), mem_mode, insn) : 0; + + if (new0 != XEXP (x, 0) || new1 != XEXP (x, 1)) + return gen_rtx (code, GET_MODE (x), new0, new1); + } + return x; + + case EXPR_LIST: + /* If we have something in XEXP (x, 0), the usual case, eliminate it. */ + if (XEXP (x, 0)) + { + new = eliminate_regs (XEXP (x, 0), mem_mode, insn); + if (new != XEXP (x, 0)) + x = gen_rtx (EXPR_LIST, REG_NOTE_KIND (x), new, XEXP (x, 1)); + } + + /* ... fall through ... */ + + case INSN_LIST: + /* Now do eliminations in the rest of the chain. If this was + an EXPR_LIST, this might result in allocating more memory than is + strictly needed, but it simplifies the code. */ + if (XEXP (x, 1)) + { + new = eliminate_regs (XEXP (x, 1), mem_mode, insn); + if (new != XEXP (x, 1)) + return gen_rtx (GET_CODE (x), GET_MODE (x), XEXP (x, 0), new); + } + return x; + + case PRE_INC: + case POST_INC: + case PRE_DEC: + case POST_DEC: + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++) + if (ep->to_rtx == XEXP (x, 0)) + { + int size = GET_MODE_SIZE (mem_mode); + + /* If more bytes than MEM_MODE are pushed, account for them. */ +#ifdef PUSH_ROUNDING + if (ep->to_rtx == stack_pointer_rtx) + size = PUSH_ROUNDING (size); +#endif + if (code == PRE_DEC || code == POST_DEC) + ep->offset += size; + else + ep->offset -= size; + } + + /* Fall through to generic unary operation case. */ + case USE: + case STRICT_LOW_PART: + case NEG: case NOT: + case SIGN_EXTEND: case ZERO_EXTEND: + case TRUNCATE: case FLOAT_EXTEND: case FLOAT_TRUNCATE: + case FLOAT: case FIX: + case UNSIGNED_FIX: case UNSIGNED_FLOAT: + case ABS: + case SQRT: + case FFS: + new = eliminate_regs (XEXP (x, 0), mem_mode, insn); + if (new != XEXP (x, 0)) + return gen_rtx (code, GET_MODE (x), new); + return x; + + case SUBREG: + /* Similar to above processing, but preserve SUBREG_WORD. + Convert (subreg (mem)) to (mem) if not paradoxical. + Also, if we have a non-paradoxical (subreg (pseudo)) and the + pseudo didn't get a hard reg, we must replace this with the + eliminated version of the memory location because push_reloads + may do the replacement in certain circumstances. */ + if (GET_CODE (SUBREG_REG (x)) == REG + && (GET_MODE_SIZE (GET_MODE (x)) + <= GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)))) + && reg_equiv_memory_loc != 0 + && reg_equiv_memory_loc[REGNO (SUBREG_REG (x))] != 0) + { + new = eliminate_regs (reg_equiv_memory_loc[REGNO (SUBREG_REG (x))], + mem_mode, insn); + + /* If we didn't change anything, we must retain the pseudo. */ + if (new == reg_equiv_memory_loc[REGNO (SUBREG_REG (x))]) + new = XEXP (x, 0); + else + /* Otherwise, ensure NEW isn't shared in case we have to reload + it. */ + new = copy_rtx (new); + } + else + new = eliminate_regs (SUBREG_REG (x), mem_mode, insn); + + if (new != XEXP (x, 0)) + { + if (GET_CODE (new) == MEM + && (GET_MODE_SIZE (GET_MODE (x)) + <= GET_MODE_SIZE (GET_MODE (new))) +#ifdef LOAD_EXTEND_OP + /* On these machines we will be reloading what is + inside the SUBREG if it originally was a pseudo and + the inner and outer modes are both a word or + smaller. So leave the SUBREG then. */ + && ! (GET_CODE (SUBREG_REG (x)) == REG + && GET_MODE_SIZE (GET_MODE (x)) <= UNITS_PER_WORD + && GET_MODE_SIZE (GET_MODE (new)) <= UNITS_PER_WORD) +#endif + ) + { + int offset = SUBREG_WORD (x) * UNITS_PER_WORD; + enum machine_mode mode = GET_MODE (x); + +#if BYTES_BIG_ENDIAN + offset += (MIN (UNITS_PER_WORD, + GET_MODE_SIZE (GET_MODE (new))) + - MIN (UNITS_PER_WORD, GET_MODE_SIZE (mode))); +#endif + + PUT_MODE (new, mode); + XEXP (new, 0) = plus_constant (XEXP (new, 0), offset); + return new; + } + else + return gen_rtx (SUBREG, GET_MODE (x), new, SUBREG_WORD (x)); + } + + return x; + + case CLOBBER: + /* If clobbering a register that is the replacement register for an + elimination we still think can be performed, note that it cannot + be performed. Otherwise, we need not be concerned about it. */ + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++) + if (ep->to_rtx == XEXP (x, 0)) + ep->can_eliminate = 0; + + new = eliminate_regs (XEXP (x, 0), mem_mode, insn); + if (new != XEXP (x, 0)) + return gen_rtx (code, GET_MODE (x), new); + return x; + + case ASM_OPERANDS: + { + rtx *temp_vec; + /* Properly handle sharing input and constraint vectors. */ + if (ASM_OPERANDS_INPUT_VEC (x) != old_asm_operands_vec) + { + /* When we come to a new vector not seen before, + scan all its elements; keep the old vector if none + of them changes; otherwise, make a copy. */ + old_asm_operands_vec = ASM_OPERANDS_INPUT_VEC (x); + temp_vec = (rtx *) alloca (XVECLEN (x, 3) * sizeof (rtx)); + for (i = 0; i < ASM_OPERANDS_INPUT_LENGTH (x); i++) + temp_vec[i] = eliminate_regs (ASM_OPERANDS_INPUT (x, i), + mem_mode, insn); + + for (i = 0; i < ASM_OPERANDS_INPUT_LENGTH (x); i++) + if (temp_vec[i] != ASM_OPERANDS_INPUT (x, i)) + break; + + if (i == ASM_OPERANDS_INPUT_LENGTH (x)) + new_asm_operands_vec = old_asm_operands_vec; + else + new_asm_operands_vec + = gen_rtvec_v (ASM_OPERANDS_INPUT_LENGTH (x), temp_vec); + } + + /* If we had to copy the vector, copy the entire ASM_OPERANDS. */ + if (new_asm_operands_vec == old_asm_operands_vec) + return x; + + new = gen_rtx (ASM_OPERANDS, VOIDmode, ASM_OPERANDS_TEMPLATE (x), + ASM_OPERANDS_OUTPUT_CONSTRAINT (x), + ASM_OPERANDS_OUTPUT_IDX (x), new_asm_operands_vec, + ASM_OPERANDS_INPUT_CONSTRAINT_VEC (x), + ASM_OPERANDS_SOURCE_FILE (x), + ASM_OPERANDS_SOURCE_LINE (x)); + new->volatil = x->volatil; + return new; + } + + case SET: + /* Check for setting a register that we know about. */ + if (GET_CODE (SET_DEST (x)) == REG) + { + /* See if this is setting the replacement register for an + elimination. + + If DEST is the hard frame pointer, we do nothing because we + assume that all assignments to the frame pointer are for + non-local gotos and are being done at a time when they are valid + and do not disturb anything else. Some machines want to + eliminate a fake argument pointer (or even a fake frame pointer) + with either the real frame or the stack pointer. Assignments to + the hard frame pointer must not prevent this elimination. */ + + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; + ep++) + if (ep->to_rtx == SET_DEST (x) + && SET_DEST (x) != hard_frame_pointer_rtx) + { + /* If it is being incremented, adjust the offset. Otherwise, + this elimination can't be done. */ + rtx src = SET_SRC (x); + + if (GET_CODE (src) == PLUS + && XEXP (src, 0) == SET_DEST (x) + && GET_CODE (XEXP (src, 1)) == CONST_INT) + ep->offset -= INTVAL (XEXP (src, 1)); + else + ep->can_eliminate = 0; + } + + /* Now check to see we are assigning to a register that can be + eliminated. If so, it must be as part of a PARALLEL, since we + will not have been called if this is a single SET. So indicate + that we can no longer eliminate this reg. */ + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; + ep++) + if (ep->from_rtx == SET_DEST (x) && ep->can_eliminate) + ep->can_eliminate = 0; + } + + /* Now avoid the loop below in this common case. */ + { + rtx new0 = eliminate_regs (SET_DEST (x), 0, insn); + rtx new1 = eliminate_regs (SET_SRC (x), 0, insn); + + /* If SET_DEST changed from a REG to a MEM and INSN is an insn, + write a CLOBBER insn. */ + if (GET_CODE (SET_DEST (x)) == REG && GET_CODE (new0) == MEM + && insn != 0 && GET_CODE (insn) != EXPR_LIST + && GET_CODE (insn) != INSN_LIST) + emit_insn_after (gen_rtx (CLOBBER, VOIDmode, SET_DEST (x)), insn); + + if (new0 != SET_DEST (x) || new1 != SET_SRC (x)) + return gen_rtx (SET, VOIDmode, new0, new1); + } + + return x; + + case MEM: + /* Our only special processing is to pass the mode of the MEM to our + recursive call and copy the flags. While we are here, handle this + case more efficiently. */ + new = eliminate_regs (XEXP (x, 0), GET_MODE (x), insn); + if (new != XEXP (x, 0)) + { + new = gen_rtx (MEM, GET_MODE (x), new); + new->volatil = x->volatil; + new->unchanging = x->unchanging; + new->in_struct = x->in_struct; + return new; + } + else + return x; + } + + /* Process each of our operands recursively. If any have changed, make a + copy of the rtx. */ + fmt = GET_RTX_FORMAT (code); + for (i = 0; i < GET_RTX_LENGTH (code); i++, fmt++) + { + if (*fmt == 'e') + { + new = eliminate_regs (XEXP (x, i), mem_mode, insn); + if (new != XEXP (x, i) && ! copied) + { + rtx new_x = rtx_alloc (code); + bcopy ((char *) x, (char *) new_x, + (sizeof (*new_x) - sizeof (new_x->fld) + + sizeof (new_x->fld[0]) * GET_RTX_LENGTH (code))); + x = new_x; + copied = 1; + } + XEXP (x, i) = new; + } + else if (*fmt == 'E') + { + int copied_vec = 0; + for (j = 0; j < XVECLEN (x, i); j++) + { + new = eliminate_regs (XVECEXP (x, i, j), mem_mode, insn); + if (new != XVECEXP (x, i, j) && ! copied_vec) + { + rtvec new_v = gen_rtvec_v (XVECLEN (x, i), + &XVECEXP (x, i, 0)); + if (! copied) + { + rtx new_x = rtx_alloc (code); + bcopy ((char *) x, (char *) new_x, + (sizeof (*new_x) - sizeof (new_x->fld) + + (sizeof (new_x->fld[0]) + * GET_RTX_LENGTH (code)))); + x = new_x; + copied = 1; + } + XVEC (x, i) = new_v; + copied_vec = 1; + } + XVECEXP (x, i, j) = new; + } + } + } + + return x; +} + +/* Scan INSN and eliminate all eliminable registers in it. + + If REPLACE is nonzero, do the replacement destructively. Also + delete the insn as dead it if it is setting an eliminable register. + + If REPLACE is zero, do all our allocations in reload_obstack. + + If no eliminations were done and this insn doesn't require any elimination + processing (these are not identical conditions: it might be updating sp, + but not referencing fp; this needs to be seen during reload_as_needed so + that the offset between fp and sp can be taken into consideration), zero + is returned. Otherwise, 1 is returned. */ + +static int +eliminate_regs_in_insn (insn, replace) + rtx insn; + int replace; +{ + rtx old_body = PATTERN (insn); + rtx old_set = single_set (insn); + rtx new_body; + int val = 0; + struct elim_table *ep; + + if (! replace) + push_obstacks (&reload_obstack, &reload_obstack); + + if (old_set != 0 && GET_CODE (SET_DEST (old_set)) == REG + && REGNO (SET_DEST (old_set)) < FIRST_PSEUDO_REGISTER) + { + /* Check for setting an eliminable register. */ + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++) + if (ep->from_rtx == SET_DEST (old_set) && ep->can_eliminate) + { +#if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM + /* If this is setting the frame pointer register to the + hardware frame pointer register and this is an elimination + that will be done (tested above), this insn is really + adjusting the frame pointer downward to compensate for + the adjustment done before a nonlocal goto. */ + if (ep->from == FRAME_POINTER_REGNUM + && ep->to == HARD_FRAME_POINTER_REGNUM) + { + rtx src = SET_SRC (old_set); + int offset, ok = 0; + + if (src == ep->to_rtx) + offset = 0, ok = 1; + else if (GET_CODE (src) == PLUS + && GET_CODE (XEXP (src, 0)) == CONST_INT) + offset = INTVAL (XEXP (src, 0)), ok = 1; + + if (ok) + { + if (replace) + { + rtx src + = plus_constant (ep->to_rtx, offset - ep->offset); + + /* First see if this insn remains valid when we + make the change. If not, keep the INSN_CODE + the same and let reload fit it up. */ + validate_change (insn, &SET_SRC (old_set), src, 1); + validate_change (insn, &SET_DEST (old_set), + ep->to_rtx, 1); + if (! apply_change_group ()) + { + SET_SRC (old_set) = src; + SET_DEST (old_set) = ep->to_rtx; + } + } + + val = 1; + goto done; + } + } +#endif + + /* In this case this insn isn't serving a useful purpose. We + will delete it in reload_as_needed once we know that this + elimination is, in fact, being done. + + If REPLACE isn't set, we can't delete this insn, but neededn't + process it since it won't be used unless something changes. */ + if (replace) + delete_dead_insn (insn); + val = 1; + goto done; + } + + /* Check for (set (reg) (plus (reg from) (offset))) where the offset + in the insn is the negative of the offset in FROM. Substitute + (set (reg) (reg to)) for the insn and change its code. + + We have to do this here, rather than in eliminate_regs, do that we can + change the insn code. */ + + if (GET_CODE (SET_SRC (old_set)) == PLUS + && GET_CODE (XEXP (SET_SRC (old_set), 0)) == REG + && GET_CODE (XEXP (SET_SRC (old_set), 1)) == CONST_INT) + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; + ep++) + if (ep->from_rtx == XEXP (SET_SRC (old_set), 0) + && ep->can_eliminate) + { + /* We must stop at the first elimination that will be used. + If this one would replace the PLUS with a REG, do it + now. Otherwise, quit the loop and let eliminate_regs + do its normal replacement. */ + if (ep->offset == - INTVAL (XEXP (SET_SRC (old_set), 1))) + { + /* We assume here that we don't need a PARALLEL of + any CLOBBERs for this assignment. There's not + much we can do if we do need it. */ + PATTERN (insn) = gen_rtx (SET, VOIDmode, + SET_DEST (old_set), ep->to_rtx); + INSN_CODE (insn) = -1; + val = 1; + goto done; + } + + break; + } + } + + old_asm_operands_vec = 0; + + /* Replace the body of this insn with a substituted form. If we changed + something, return non-zero. + + If we are replacing a body that was a (set X (plus Y Z)), try to + re-recognize the insn. We do this in case we had a simple addition + but now can do this as a load-address. This saves an insn in this + common case. */ + + new_body = eliminate_regs (old_body, 0, replace ? insn : NULL_RTX); + if (new_body != old_body) + { + /* If we aren't replacing things permanently and we changed something, + make another copy to ensure that all the RTL is new. Otherwise + things can go wrong if find_reload swaps commutative operands + and one is inside RTL that has been copied while the other is not. */ + + /* Don't copy an asm_operands because (1) there's no need and (2) + copy_rtx can't do it properly when there are multiple outputs. */ + if (! replace && asm_noperands (old_body) < 0) + new_body = copy_rtx (new_body); + + /* If we had a move insn but now we don't, rerecognize it. This will + cause spurious re-recognition if the old move had a PARALLEL since + the new one still will, but we can't call single_set without + having put NEW_BODY into the insn and the re-recognition won't + hurt in this rare case. */ + if (old_set != 0 + && ((GET_CODE (SET_SRC (old_set)) == REG + && (GET_CODE (new_body) != SET + || GET_CODE (SET_SRC (new_body)) != REG)) + /* If this was a load from or store to memory, compare + the MEM in recog_operand to the one in the insn. If they + are not equal, then rerecognize the insn. */ + || (old_set != 0 + && ((GET_CODE (SET_SRC (old_set)) == MEM + && SET_SRC (old_set) != recog_operand[1]) + || (GET_CODE (SET_DEST (old_set)) == MEM + && SET_DEST (old_set) != recog_operand[0]))) + /* If this was an add insn before, rerecognize. */ + || GET_CODE (SET_SRC (old_set)) == PLUS)) + { + if (! validate_change (insn, &PATTERN (insn), new_body, 0)) + /* If recognition fails, store the new body anyway. + It's normal to have recognition failures here + due to bizarre memory addresses; reloading will fix them. */ + PATTERN (insn) = new_body; + } + else + PATTERN (insn) = new_body; + + val = 1; + } + + /* Loop through all elimination pairs. See if any have changed and + recalculate the number not at initial offset. + + Compute the maximum offset (minimum offset if the stack does not + grow downward) for each elimination pair. + + We also detect a cases where register elimination cannot be done, + namely, if a register would be both changed and referenced outside a MEM + in the resulting insn since such an insn is often undefined and, even if + not, we cannot know what meaning will be given to it. Note that it is + valid to have a register used in an address in an insn that changes it + (presumably with a pre- or post-increment or decrement). + + If anything changes, return nonzero. */ + + num_not_at_initial_offset = 0; + for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++) + { + if (ep->previous_offset != ep->offset && ep->ref_outside_mem) + ep->can_eliminate = 0; + + ep->ref_outside_mem = 0; + + if (ep->previous_offset != ep->offset) + val = 1; + + ep->previous_offset = ep->offset; + if (ep->can_eliminate && ep->offset != ep->initial_offset) + num_not_at_initial_offset++; + +#ifdef STACK_GROWS_DOWNWARD + ep->max_offset = MAX (ep->max_offset, ep->offset); +#else + ep->max_offset = MIN (ep->max_offset, ep->offset); +#endif + } + + done: + /* If we changed something, perform elmination in REG_NOTES. This is + needed even when REPLACE is zero because a REG_DEAD note might refer + to a register that we eliminate and could cause a different number + of spill registers to be needed in the final reload pass than in + the pre-passes. */ + if (val && REG_NOTES (insn) != 0) + REG_NOTES (insn) = eliminate_regs (REG_NOTES (insn), 0, REG_NOTES (insn)); + + if (! replace) + pop_obstacks (); + + return val; +} + +/* Given X, a SET or CLOBBER of DEST, if DEST is the target of a register + replacement we currently believe is valid, mark it as not eliminable if X + modifies DEST in any way other than by adding a constant integer to it. + + If DEST is the frame pointer, we do nothing because we assume that + all assignments to the hard frame pointer are nonlocal gotos and are being + done at a time when they are valid and do not disturb anything else. + Some machines want to eliminate a fake argument pointer with either the + frame or stack pointer. Assignments to the hard frame pointer must not + prevent this elimination. + + Called via note_stores from reload before starting its passes to scan + the insns of the function. */ + +static void +mark_not_eliminable (dest, x) + rtx dest; + rtx x; +{ + register int i; + + /* A SUBREG of a hard register here is just changing its mode. We should + not see a SUBREG of an eliminable hard register, but check just in + case. */ + if (GET_CODE (dest) == SUBREG) + dest = SUBREG_REG (dest); + + if (dest == hard_frame_pointer_rtx) + return; + + for (i = 0; i < NUM_ELIMINABLE_REGS; i++) + if (reg_eliminate[i].can_eliminate && dest == reg_eliminate[i].to_rtx + && (GET_CODE (x) != SET + || GET_CODE (SET_SRC (x)) != PLUS + || XEXP (SET_SRC (x), 0) != dest + || GET_CODE (XEXP (SET_SRC (x), 1)) != CONST_INT)) + { + reg_eliminate[i].can_eliminate_previous + = reg_eliminate[i].can_eliminate = 0; + num_eliminable--; + } +} + +/* Kick all pseudos out of hard register REGNO. + If GLOBAL is nonzero, try to find someplace else to put them. + If DUMPFILE is nonzero, log actions taken on that file. + + If CANT_ELIMINATE is nonzero, it means that we are doing this spill + because we found we can't eliminate some register. In the case, no pseudos + are allowed to be in the register, even if they are only in a block that + doesn't require spill registers, unlike the case when we are spilling this + hard reg to produce another spill register. + + Return nonzero if any pseudos needed to be kicked out. */ + +static int +spill_hard_reg (regno, global, dumpfile, cant_eliminate) + register int regno; + int global; + FILE *dumpfile; + int cant_eliminate; +{ + enum reg_class class = REGNO_REG_CLASS (regno); + int something_changed = 0; + register int i; + + SET_HARD_REG_BIT (forbidden_regs, regno); + + if (cant_eliminate) + regs_ever_live[regno] = 1; + + /* Spill every pseudo reg that was allocated to this reg + or to something that overlaps this reg. */ + + for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++) + if (reg_renumber[i] >= 0 + && reg_renumber[i] <= regno + && (reg_renumber[i] + + HARD_REGNO_NREGS (reg_renumber[i], + PSEUDO_REGNO_MODE (i)) + > regno)) + { + /* If this register belongs solely to a basic block which needed no + spilling of any class that this register is contained in, + leave it be, unless we are spilling this register because + it was a hard register that can't be eliminated. */ + + if (! cant_eliminate + && basic_block_needs[0] + && reg_basic_block[i] >= 0 + && basic_block_needs[(int) class][reg_basic_block[i]] == 0) + { + enum reg_class *p; + + for (p = reg_class_superclasses[(int) class]; + *p != LIM_REG_CLASSES; p++) + if (basic_block_needs[(int) *p][reg_basic_block[i]] > 0) + break; + + if (*p == LIM_REG_CLASSES) + continue; + } + + /* Mark it as no longer having a hard register home. */ + reg_renumber[i] = -1; + /* We will need to scan everything again. */ + something_changed = 1; + if (global) + retry_global_alloc (i, forbidden_regs); + + alter_reg (i, regno); + if (dumpfile) + { + if (reg_renumber[i] == -1) + fprintf (dumpfile, " Register %d now on stack.\n\n", i); + else + fprintf (dumpfile, " Register %d now in %d.\n\n", + i, reg_renumber[i]); + } + } + for (i = 0; i < scratch_list_length; i++) + { + if (scratch_list[i] && REGNO (scratch_list[i]) == regno) + { + if (! cant_eliminate && basic_block_needs[0] + && ! basic_block_needs[(int) class][scratch_block[i]]) + { + enum reg_class *p; + + for (p = reg_class_superclasses[(int) class]; + *p != LIM_REG_CLASSES; p++) + if (basic_block_needs[(int) *p][scratch_block[i]] > 0) + break; + + if (*p == LIM_REG_CLASSES) + continue; + } + PUT_CODE (scratch_list[i], SCRATCH); + scratch_list[i] = 0; + something_changed = 1; + continue; + } + } + + return something_changed; +} + +/* Find all paradoxical subregs within X and update reg_max_ref_width. + Also mark any hard registers used to store user variables as + forbidden from being used for spill registers. */ + +static void +scan_paradoxical_subregs (x) + register rtx x; +{ + register int i; + register char *fmt; + register enum rtx_code code = GET_CODE (x); + + switch (code) + { + case REG: +#ifdef SMALL_REGISTER_CLASSES + if (REGNO (x) < FIRST_PSEUDO_REGISTER && REG_USERVAR_P (x)) + SET_HARD_REG_BIT (forbidden_regs, REGNO (x)); +#endif + return; + + case CONST_INT: + case CONST: + case SYMBOL_REF: + case LABEL_REF: + case CONST_DOUBLE: + case CC0: + case PC: + case USE: + case CLOBBER: + return; + + case SUBREG: + if (GET_CODE (SUBREG_REG (x)) == REG + && GET_MODE_SIZE (GET_MODE (x)) > GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)))) + reg_max_ref_width[REGNO (SUBREG_REG (x))] + = GET_MODE_SIZE (GET_MODE (x)); + return; + } + + fmt = GET_RTX_FORMAT (code); + for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) + { + if (fmt[i] == 'e') + scan_paradoxical_subregs (XEXP (x, i)); + else if (fmt[i] == 'E') + { + register int j; + for (j = XVECLEN (x, i) - 1; j >=0; j--) + scan_paradoxical_subregs (XVECEXP (x, i, j)); + } + } +} + +static int +hard_reg_use_compare (p1, p2) + struct hard_reg_n_uses *p1, *p2; +{ + int tem = p1->uses - p2->uses; + if (tem != 0) return tem; + /* If regs are equally good, sort by regno, + so that the results of qsort leave nothing to chance. */ + return p1->regno - p2->regno; +} + +/* Choose the order to consider regs for use as reload registers + based on how much trouble would be caused by spilling one. + Store them in order of decreasing preference in potential_reload_regs. */ + +static void +order_regs_for_reload () +{ + register int i; + register int o = 0; + int large = 0; + + struct hard_reg_n_uses hard_reg_n_uses[FIRST_PSEUDO_REGISTER]; + + CLEAR_HARD_REG_SET (bad_spill_regs); + + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + potential_reload_regs[i] = -1; + + /* Count number of uses of each hard reg by pseudo regs allocated to it + and then order them by decreasing use. */ + + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + { + hard_reg_n_uses[i].uses = 0; + hard_reg_n_uses[i].regno = i; + } + + for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++) + { + int regno = reg_renumber[i]; + if (regno >= 0) + { + int lim = regno + HARD_REGNO_NREGS (regno, PSEUDO_REGNO_MODE (i)); + while (regno < lim) + hard_reg_n_uses[regno++].uses += reg_n_refs[i]; + } + large += reg_n_refs[i]; + } + + /* Now fixed registers (which cannot safely be used for reloading) + get a very high use count so they will be considered least desirable. + Registers used explicitly in the rtl code are almost as bad. */ + + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + { + if (fixed_regs[i]) + { + hard_reg_n_uses[i].uses += 2 * large + 2; + SET_HARD_REG_BIT (bad_spill_regs, i); + } + else if (regs_explicitly_used[i]) + { + hard_reg_n_uses[i].uses += large + 1; +#ifndef SMALL_REGISTER_CLASSES + /* ??? We are doing this here because of the potential that + bad code may be generated if a register explicitly used in + an insn was used as a spill register for that insn. But + not using these are spill registers may lose on some machine. + We'll have to see how this works out. */ + SET_HARD_REG_BIT (bad_spill_regs, i); +#endif + } + } + hard_reg_n_uses[HARD_FRAME_POINTER_REGNUM].uses += 2 * large + 2; + SET_HARD_REG_BIT (bad_spill_regs, HARD_FRAME_POINTER_REGNUM); + +#ifdef ELIMINABLE_REGS + /* If registers other than the frame pointer are eliminable, mark them as + poor choices. */ + for (i = 0; i < NUM_ELIMINABLE_REGS; i++) + { + hard_reg_n_uses[reg_eliminate[i].from].uses += 2 * large + 2; + SET_HARD_REG_BIT (bad_spill_regs, reg_eliminate[i].from); + } +#endif + + /* Prefer registers not so far used, for use in temporary loading. + Among them, if REG_ALLOC_ORDER is defined, use that order. + Otherwise, prefer registers not preserved by calls. */ + +#ifdef REG_ALLOC_ORDER + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + { + int regno = reg_alloc_order[i]; + + if (hard_reg_n_uses[regno].uses == 0) + potential_reload_regs[o++] = regno; + } +#else + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + { + if (hard_reg_n_uses[i].uses == 0 && call_used_regs[i]) + potential_reload_regs[o++] = i; + } + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + { + if (hard_reg_n_uses[i].uses == 0 && ! call_used_regs[i]) + potential_reload_regs[o++] = i; + } +#endif + + qsort (hard_reg_n_uses, FIRST_PSEUDO_REGISTER, + sizeof hard_reg_n_uses[0], hard_reg_use_compare); + + /* Now add the regs that are already used, + preferring those used less often. The fixed and otherwise forbidden + registers will be at the end of this list. */ + + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + if (hard_reg_n_uses[i].uses != 0) + potential_reload_regs[o++] = hard_reg_n_uses[i].regno; +} + +/* Used in reload_as_needed to sort the spilled regs. */ +static int +compare_spill_regs (r1, r2) + short *r1, *r2; +{ + return *r1 < *r2 ? -1: 1; +} + +/* Reload pseudo-registers into hard regs around each insn as needed. + Additional register load insns are output before the insn that needs it + and perhaps store insns after insns that modify the reloaded pseudo reg. + + reg_last_reload_reg and reg_reloaded_contents keep track of + which registers are already available in reload registers. + We update these for the reloads that we perform, + as the insns are scanned. */ + +static void +reload_as_needed (first, live_known) + rtx first; + int live_known; +{ + register rtx insn; + register int i; + int this_block = 0; + rtx x; + rtx after_call = 0; + + bzero ((char *) spill_reg_rtx, sizeof spill_reg_rtx); + bzero ((char *) spill_reg_store, sizeof spill_reg_store); + reg_last_reload_reg = (rtx *) alloca (max_regno * sizeof (rtx)); + bzero ((char *) reg_last_reload_reg, max_regno * sizeof (rtx)); + reg_has_output_reload = (char *) alloca (max_regno); + for (i = 0; i < n_spills; i++) + { + reg_reloaded_contents[i] = -1; + reg_reloaded_insn[i] = 0; + } + + /* Reset all offsets on eliminable registers to their initial values. */ +#ifdef ELIMINABLE_REGS + for (i = 0; i < NUM_ELIMINABLE_REGS; i++) + { + INITIAL_ELIMINATION_OFFSET (reg_eliminate[i].from, reg_eliminate[i].to, + reg_eliminate[i].initial_offset); + reg_eliminate[i].previous_offset + = reg_eliminate[i].offset = reg_eliminate[i].initial_offset; + } +#else + INITIAL_FRAME_POINTER_OFFSET (reg_eliminate[0].initial_offset); + reg_eliminate[0].previous_offset + = reg_eliminate[0].offset = reg_eliminate[0].initial_offset; +#endif + + num_not_at_initial_offset = 0; + + /* Order the spilled regs, so that allocate_reload_regs can guarantee to + pack registers with group needs. */ + if (n_spills > 1) + { + qsort (spill_regs, n_spills, sizeof (short), compare_spill_regs); + for (i = 0; i < n_spills; i++) + spill_reg_order[spill_regs[i]] = i; + } + + for (insn = first; insn;) + { + register rtx next = NEXT_INSN (insn); + + /* Notice when we move to a new basic block. */ + if (live_known && this_block + 1 < n_basic_blocks + && insn == basic_block_head[this_block+1]) + ++this_block; + + /* If we pass a label, copy the offsets from the label information + into the current offsets of each elimination. */ + if (GET_CODE (insn) == CODE_LABEL) + { + num_not_at_initial_offset = 0; + for (i = 0; i < NUM_ELIMINABLE_REGS; i++) + { + reg_eliminate[i].offset = reg_eliminate[i].previous_offset + = offsets_at[CODE_LABEL_NUMBER (insn)][i]; + if (reg_eliminate[i].can_eliminate + && (reg_eliminate[i].offset + != reg_eliminate[i].initial_offset)) + num_not_at_initial_offset++; + } + } + + else if (GET_RTX_CLASS (GET_CODE (insn)) == 'i') + { + rtx avoid_return_reg = 0; + +#ifdef SMALL_REGISTER_CLASSES + /* Set avoid_return_reg if this is an insn + that might use the value of a function call. */ + if (GET_CODE (insn) == CALL_INSN) + { + if (GET_CODE (PATTERN (insn)) == SET) + after_call = SET_DEST (PATTERN (insn)); + else if (GET_CODE (PATTERN (insn)) == PARALLEL + && GET_CODE (XVECEXP (PATTERN (insn), 0, 0)) == SET) + after_call = SET_DEST (XVECEXP (PATTERN (insn), 0, 0)); + else + after_call = 0; + } + else if (after_call != 0 + && !(GET_CODE (PATTERN (insn)) == SET + && SET_DEST (PATTERN (insn)) == stack_pointer_rtx)) + { + if (reg_referenced_p (after_call, PATTERN (insn))) + avoid_return_reg = after_call; + after_call = 0; + } +#endif /* SMALL_REGISTER_CLASSES */ + + /* If this is a USE and CLOBBER of a MEM, ensure that any + references to eliminable registers have been removed. */ + + if ((GET_CODE (PATTERN (insn)) == USE + || GET_CODE (PATTERN (insn)) == CLOBBER) + && GET_CODE (XEXP (PATTERN (insn), 0)) == MEM) + XEXP (XEXP (PATTERN (insn), 0), 0) + = eliminate_regs (XEXP (XEXP (PATTERN (insn), 0), 0), + GET_MODE (XEXP (PATTERN (insn), 0)), NULL_RTX); + + /* If we need to do register elimination processing, do so. + This might delete the insn, in which case we are done. */ + if (num_eliminable && GET_MODE (insn) == QImode) + { + eliminate_regs_in_insn (insn, 1); + if (GET_CODE (insn) == NOTE) + { + insn = next; + continue; + } + } + + if (GET_MODE (insn) == VOIDmode) + n_reloads = 0; + /* First find the pseudo regs that must be reloaded for this insn. + This info is returned in the tables reload_... (see reload.h). + Also modify the body of INSN by substituting RELOAD + rtx's for those pseudo regs. */ + else + { + bzero (reg_has_output_reload, max_regno); + CLEAR_HARD_REG_SET (reg_is_output_reload); + + find_reloads (insn, 1, spill_indirect_levels, live_known, + spill_reg_order); + } + + if (n_reloads > 0) + { + rtx prev = PREV_INSN (insn), next = NEXT_INSN (insn); + rtx p; + int class; + + /* If this block has not had spilling done for a + particular clas and we have any non-optionals that need a + spill reg in that class, abort. */ + + for (class = 0; class < N_REG_CLASSES; class++) + if (basic_block_needs[class] != 0 + && basic_block_needs[class][this_block] == 0) + for (i = 0; i < n_reloads; i++) + if (class == (int) reload_reg_class[i] + && reload_reg_rtx[i] == 0 + && ! reload_optional[i] + && (reload_in[i] != 0 || reload_out[i] != 0 + || reload_secondary_p[i] != 0)) + abort (); + + /* Now compute which reload regs to reload them into. Perhaps + reusing reload regs from previous insns, or else output + load insns to reload them. Maybe output store insns too. + Record the choices of reload reg in reload_reg_rtx. */ + choose_reload_regs (insn, avoid_return_reg); + +#ifdef SMALL_REGISTER_CLASSES + /* Merge any reloads that we didn't combine for fear of + increasing the number of spill registers needed but now + discover can be safely merged. */ + merge_assigned_reloads (insn); +#endif + + /* Generate the insns to reload operands into or out of + their reload regs. */ + emit_reload_insns (insn); + + /* Substitute the chosen reload regs from reload_reg_rtx + into the insn's body (or perhaps into the bodies of other + load and store insn that we just made for reloading + and that we moved the structure into). */ + subst_reloads (); + + /* If this was an ASM, make sure that all the reload insns + we have generated are valid. If not, give an error + and delete them. */ + + if (asm_noperands (PATTERN (insn)) >= 0) + for (p = NEXT_INSN (prev); p != next; p = NEXT_INSN (p)) + if (p != insn && GET_RTX_CLASS (GET_CODE (p)) == 'i' + && (recog_memoized (p) < 0 + || (insn_extract (p), + ! constrain_operands (INSN_CODE (p), 1)))) + { + error_for_asm (insn, + "`asm' operand requires impossible reload"); + PUT_CODE (p, NOTE); + NOTE_SOURCE_FILE (p) = 0; + NOTE_LINE_NUMBER (p) = NOTE_INSN_DELETED; + } + } + /* Any previously reloaded spilled pseudo reg, stored in this insn, + is no longer validly lying around to save a future reload. + Note that this does not detect pseudos that were reloaded + for this insn in order to be stored in + (obeying register constraints). That is correct; such reload + registers ARE still valid. */ + note_stores (PATTERN (insn), forget_old_reloads_1); + + /* There may have been CLOBBER insns placed after INSN. So scan + between INSN and NEXT and use them to forget old reloads. */ + for (x = NEXT_INSN (insn); x != next; x = NEXT_INSN (x)) + if (GET_CODE (x) == INSN && GET_CODE (PATTERN (x)) == CLOBBER) + note_stores (PATTERN (x), forget_old_reloads_1); + +#ifdef AUTO_INC_DEC + /* Likewise for regs altered by auto-increment in this insn. + But note that the reg-notes are not changed by reloading: + they still contain the pseudo-regs, not the spill regs. */ + for (x = REG_NOTES (insn); x; x = XEXP (x, 1)) + if (REG_NOTE_KIND (x) == REG_INC) + { + /* See if this pseudo reg was reloaded in this insn. + If so, its last-reload info is still valid + because it is based on this insn's reload. */ + for (i = 0; i < n_reloads; i++) + if (reload_out[i] == XEXP (x, 0)) + break; + + if (i == n_reloads) + forget_old_reloads_1 (XEXP (x, 0), NULL_RTX); + } +#endif + } + /* A reload reg's contents are unknown after a label. */ + if (GET_CODE (insn) == CODE_LABEL) + for (i = 0; i < n_spills; i++) + { + reg_reloaded_contents[i] = -1; + reg_reloaded_insn[i] = 0; + } + + /* Don't assume a reload reg is still good after a call insn + if it is a call-used reg. */ + else if (GET_CODE (insn) == CALL_INSN) + for (i = 0; i < n_spills; i++) + if (call_used_regs[spill_regs[i]]) + { + reg_reloaded_contents[i] = -1; + reg_reloaded_insn[i] = 0; + } + + /* In case registers overlap, allow certain insns to invalidate + particular hard registers. */ + +#ifdef INSN_CLOBBERS_REGNO_P + for (i = 0 ; i < n_spills ; i++) + if (INSN_CLOBBERS_REGNO_P (insn, spill_regs[i])) + { + reg_reloaded_contents[i] = -1; + reg_reloaded_insn[i] = 0; + } +#endif + + insn = next; + +#ifdef USE_C_ALLOCA + alloca (0); +#endif + } +} + +/* Discard all record of any value reloaded from X, + or reloaded in X from someplace else; + unless X is an output reload reg of the current insn. + + X may be a hard reg (the reload reg) + or it may be a pseudo reg that was reloaded from. */ + +static void +forget_old_reloads_1 (x, ignored) + rtx x; + rtx ignored; +{ + register int regno; + int nr; + int offset = 0; + + /* note_stores does give us subregs of hard regs. */ + while (GET_CODE (x) == SUBREG) + { + offset += SUBREG_WORD (x); + x = SUBREG_REG (x); + } + + if (GET_CODE (x) != REG) + return; + + regno = REGNO (x) + offset; + + if (regno >= FIRST_PSEUDO_REGISTER) + nr = 1; + else + { + int i; + nr = HARD_REGNO_NREGS (regno, GET_MODE (x)); + /* Storing into a spilled-reg invalidates its contents. + This can happen if a block-local pseudo is allocated to that reg + and it wasn't spilled because this block's total need is 0. + Then some insn might have an optional reload and use this reg. */ + for (i = 0; i < nr; i++) + if (spill_reg_order[regno + i] >= 0 + /* But don't do this if the reg actually serves as an output + reload reg in the current instruction. */ + && (n_reloads == 0 + || ! TEST_HARD_REG_BIT (reg_is_output_reload, regno + i))) + { + reg_reloaded_contents[spill_reg_order[regno + i]] = -1; + reg_reloaded_insn[spill_reg_order[regno + i]] = 0; + } + } + + /* Since value of X has changed, + forget any value previously copied from it. */ + + while (nr-- > 0) + /* But don't forget a copy if this is the output reload + that establishes the copy's validity. */ + if (n_reloads == 0 || reg_has_output_reload[regno + nr] == 0) + reg_last_reload_reg[regno + nr] = 0; +} + +/* For each reload, the mode of the reload register. */ +static enum machine_mode reload_mode[MAX_RELOADS]; + +/* For each reload, the largest number of registers it will require. */ +static int reload_nregs[MAX_RELOADS]; + +/* Comparison function for qsort to decide which of two reloads + should be handled first. *P1 and *P2 are the reload numbers. */ + +static int +reload_reg_class_lower (p1, p2) + short *p1, *p2; +{ + register int r1 = *p1, r2 = *p2; + register int t; + + /* Consider required reloads before optional ones. */ + t = reload_optional[r1] - reload_optional[r2]; + if (t != 0) + return t; + + /* Count all solitary classes before non-solitary ones. */ + t = ((reg_class_size[(int) reload_reg_class[r2]] == 1) + - (reg_class_size[(int) reload_reg_class[r1]] == 1)); + if (t != 0) + return t; + + /* Aside from solitaires, consider all multi-reg groups first. */ + t = reload_nregs[r2] - reload_nregs[r1]; + if (t != 0) + return t; + + /* Consider reloads in order of increasing reg-class number. */ + t = (int) reload_reg_class[r1] - (int) reload_reg_class[r2]; + if (t != 0) + return t; + + /* If reloads are equally urgent, sort by reload number, + so that the results of qsort leave nothing to chance. */ + return r1 - r2; +} + +/* The following HARD_REG_SETs indicate when each hard register is + used for a reload of various parts of the current insn. */ + +/* If reg is in use as a reload reg for a RELOAD_OTHER reload. */ +static HARD_REG_SET reload_reg_used; +/* If reg is in use for a RELOAD_FOR_INPUT_ADDRESS reload for operand I. */ +static HARD_REG_SET reload_reg_used_in_input_addr[MAX_RECOG_OPERANDS]; +/* If reg is in use for a RELOAD_FOR_OUTPUT_ADDRESS reload for operand I. */ +static HARD_REG_SET reload_reg_used_in_output_addr[MAX_RECOG_OPERANDS]; +/* If reg is in use for a RELOAD_FOR_INPUT reload for operand I. */ +static HARD_REG_SET reload_reg_used_in_input[MAX_RECOG_OPERANDS]; +/* If reg is in use for a RELOAD_FOR_OUTPUT reload for operand I. */ +static HARD_REG_SET reload_reg_used_in_output[MAX_RECOG_OPERANDS]; +/* If reg is in use for a RELOAD_FOR_OPERAND_ADDRESS reload. */ +static HARD_REG_SET reload_reg_used_in_op_addr; +/* If reg is in use for a RELOAD_FOR_OPADDR_ADDR reload. */ +static HARD_REG_SET reload_reg_used_in_op_addr_reload; +/* If reg is in use for a RELOAD_FOR_INSN reload. */ +static HARD_REG_SET reload_reg_used_in_insn; +/* If reg is in use for a RELOAD_FOR_OTHER_ADDRESS reload. */ +static HARD_REG_SET reload_reg_used_in_other_addr; + +/* If reg is in use as a reload reg for any sort of reload. */ +static HARD_REG_SET reload_reg_used_at_all; + +/* If reg is use as an inherited reload. We just mark the first register + in the group. */ +static HARD_REG_SET reload_reg_used_for_inherit; + +/* Mark reg REGNO as in use for a reload of the sort spec'd by OPNUM and + TYPE. MODE is used to indicate how many consecutive regs are + actually used. */ + +static void +mark_reload_reg_in_use (regno, opnum, type, mode) + int regno; + int opnum; + enum reload_type type; + enum machine_mode mode; +{ + int nregs = HARD_REGNO_NREGS (regno, mode); + int i; + + for (i = regno; i < nregs + regno; i++) + { + switch (type) + { + case RELOAD_OTHER: + SET_HARD_REG_BIT (reload_reg_used, i); + break; + + case RELOAD_FOR_INPUT_ADDRESS: + SET_HARD_REG_BIT (reload_reg_used_in_input_addr[opnum], i); + break; + + case RELOAD_FOR_OUTPUT_ADDRESS: + SET_HARD_REG_BIT (reload_reg_used_in_output_addr[opnum], i); + break; + + case RELOAD_FOR_OPERAND_ADDRESS: + SET_HARD_REG_BIT (reload_reg_used_in_op_addr, i); + break; + + case RELOAD_FOR_OPADDR_ADDR: + SET_HARD_REG_BIT (reload_reg_used_in_op_addr_reload, i); + break; + + case RELOAD_FOR_OTHER_ADDRESS: + SET_HARD_REG_BIT (reload_reg_used_in_other_addr, i); + break; + + case RELOAD_FOR_INPUT: + SET_HARD_REG_BIT (reload_reg_used_in_input[opnum], i); + break; + + case RELOAD_FOR_OUTPUT: + SET_HARD_REG_BIT (reload_reg_used_in_output[opnum], i); + break; + + case RELOAD_FOR_INSN: + SET_HARD_REG_BIT (reload_reg_used_in_insn, i); + break; + } + + SET_HARD_REG_BIT (reload_reg_used_at_all, i); + } +} + +/* Similarly, but show REGNO is no longer in use for a reload. */ + +static void +clear_reload_reg_in_use (regno, opnum, type, mode) + int regno; + int opnum; + enum reload_type type; + enum machine_mode mode; +{ + int nregs = HARD_REGNO_NREGS (regno, mode); + int i; + + for (i = regno; i < nregs + regno; i++) + { + switch (type) + { + case RELOAD_OTHER: + CLEAR_HARD_REG_BIT (reload_reg_used, i); + break; + + case RELOAD_FOR_INPUT_ADDRESS: + CLEAR_HARD_REG_BIT (reload_reg_used_in_input_addr[opnum], i); + break; + + case RELOAD_FOR_OUTPUT_ADDRESS: + CLEAR_HARD_REG_BIT (reload_reg_used_in_output_addr[opnum], i); + break; + + case RELOAD_FOR_OPERAND_ADDRESS: + CLEAR_HARD_REG_BIT (reload_reg_used_in_op_addr, i); + break; + + case RELOAD_FOR_OPADDR_ADDR: + CLEAR_HARD_REG_BIT (reload_reg_used_in_op_addr_reload, i); + break; + + case RELOAD_FOR_OTHER_ADDRESS: + CLEAR_HARD_REG_BIT (reload_reg_used_in_other_addr, i); + break; + + case RELOAD_FOR_INPUT: + CLEAR_HARD_REG_BIT (reload_reg_used_in_input[opnum], i); + break; + + case RELOAD_FOR_OUTPUT: + CLEAR_HARD_REG_BIT (reload_reg_used_in_output[opnum], i); + break; + + case RELOAD_FOR_INSN: + CLEAR_HARD_REG_BIT (reload_reg_used_in_insn, i); + break; + } + } +} + +/* 1 if reg REGNO is free as a reload reg for a reload of the sort + specified by OPNUM and TYPE. */ + +static int +reload_reg_free_p (regno, opnum, type) + int regno; + int opnum; + enum reload_type type; +{ + int i; + + /* In use for a RELOAD_OTHER means it's not available for anything except + RELOAD_FOR_OTHER_ADDRESS. Recall that RELOAD_FOR_OTHER_ADDRESS is known + to be used only for inputs. */ + + if (type != RELOAD_FOR_OTHER_ADDRESS + && TEST_HARD_REG_BIT (reload_reg_used, regno)) + return 0; + + switch (type) + { + case RELOAD_OTHER: + /* In use for anything except RELOAD_FOR_OTHER_ADDRESS means + we can't use it for RELOAD_OTHER. */ + if (TEST_HARD_REG_BIT (reload_reg_used, regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno)) + return 0; + + for (i = 0; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno)) + return 0; + + return 1; + + case RELOAD_FOR_INPUT: + if (TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno)) + return 0; + + if (TEST_HARD_REG_BIT (reload_reg_used_in_op_addr_reload, regno)) + return 0; + + /* If it is used for some other input, can't use it. */ + for (i = 0; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno)) + return 0; + + /* If it is used in a later operand's address, can't use it. */ + for (i = opnum + 1; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[i], regno)) + return 0; + + return 1; + + case RELOAD_FOR_INPUT_ADDRESS: + /* Can't use a register if it is used for an input address for this + operand or used as an input in an earlier one. */ + if (TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[opnum], regno)) + return 0; + + for (i = 0; i < opnum; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno)) + return 0; + + return 1; + + case RELOAD_FOR_OUTPUT_ADDRESS: + /* Can't use a register if it is used for an output address for this + operand or used as an output in this or a later operand. */ + if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[opnum], regno)) + return 0; + + for (i = opnum; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno)) + return 0; + + return 1; + + case RELOAD_FOR_OPERAND_ADDRESS: + for (i = 0; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno)) + return 0; + + return (! TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno) + && ! TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno)); + + case RELOAD_FOR_OPADDR_ADDR: + for (i = 0; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno)) + return 0; + + return (!TEST_HARD_REG_BIT (reload_reg_used_in_op_addr_reload, regno)); + + case RELOAD_FOR_OUTPUT: + /* This cannot share a register with RELOAD_FOR_INSN reloads, other + outputs, or an operand address for this or an earlier output. */ + if (TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno)) + return 0; + + for (i = 0; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno)) + return 0; + + for (i = 0; i <= opnum; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno)) + return 0; + + return 1; + + case RELOAD_FOR_INSN: + for (i = 0; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno)) + return 0; + + return (! TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno) + && ! TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno)); + + case RELOAD_FOR_OTHER_ADDRESS: + return ! TEST_HARD_REG_BIT (reload_reg_used_in_other_addr, regno); + } + abort (); +} + +/* Return 1 if the value in reload reg REGNO, as used by a reload + needed for the part of the insn specified by OPNUM and TYPE, + is not in use for a reload in any prior part of the insn. + + We can assume that the reload reg was already tested for availability + at the time it is needed, and we should not check this again, + in case the reg has already been marked in use. */ + +static int +reload_reg_free_before_p (regno, opnum, type) + int regno; + int opnum; + enum reload_type type; +{ + int i; + + switch (type) + { + case RELOAD_FOR_OTHER_ADDRESS: + /* These always come first. */ + return 1; + + case RELOAD_OTHER: + return ! TEST_HARD_REG_BIT (reload_reg_used_in_other_addr, regno); + + /* If this use is for part of the insn, + check the reg is not in use for any prior part. It is tempting + to try to do this by falling through from objecs that occur + later in the insn to ones that occur earlier, but that will not + correctly take into account the fact that here we MUST ignore + things that would prevent the register from being allocated in + the first place, since we know that it was allocated. */ + + case RELOAD_FOR_OUTPUT_ADDRESS: + /* Earlier reloads are for earlier outputs or their addresses, + any RELOAD_FOR_INSN reloads, any inputs or their addresses, or any + RELOAD_FOR_OTHER_ADDRESS reloads (we know it can't conflict with + RELOAD_OTHER).. */ + for (i = 0; i < opnum; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno)) + return 0; + + if (TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno)) + return 0; + + for (i = 0; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno)) + return 0; + + return (! TEST_HARD_REG_BIT (reload_reg_used_in_other_addr, regno) + && ! TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno) + && ! TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno)); + + case RELOAD_FOR_OUTPUT: + /* This can't be used in the output address for this operand and + anything that can't be used for it, except that we've already + tested for RELOAD_FOR_INSN objects. */ + + if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[opnum], regno)) + return 0; + + for (i = 0; i < opnum; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno)) + return 0; + + for (i = 0; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno)) + return 0; + + return ! TEST_HARD_REG_BIT (reload_reg_used_in_other_addr, regno); + + case RELOAD_FOR_OPERAND_ADDRESS: + case RELOAD_FOR_OPADDR_ADDR: + case RELOAD_FOR_INSN: + /* These can't conflict with inputs, or each other, so all we have to + test is input addresses and the addresses of OTHER items. */ + + for (i = 0; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[i], regno)) + return 0; + + return ! TEST_HARD_REG_BIT (reload_reg_used_in_other_addr, regno); + + case RELOAD_FOR_INPUT: + /* The only things earlier are the address for this and + earlier inputs, other inputs (which we know we don't conflict + with), and addresses of RELOAD_OTHER objects. */ + + for (i = 0; i <= opnum; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[i], regno)) + return 0; + + return ! TEST_HARD_REG_BIT (reload_reg_used_in_other_addr, regno); + + case RELOAD_FOR_INPUT_ADDRESS: + /* Similarly, all we have to check is for use in earlier inputs' + addresses. */ + for (i = 0; i < opnum; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[i], regno)) + return 0; + + return ! TEST_HARD_REG_BIT (reload_reg_used_in_other_addr, regno); + } + abort (); +} + +/* Return 1 if the value in reload reg REGNO, as used by a reload + needed for the part of the insn specified by OPNUM and TYPE, + is still available in REGNO at the end of the insn. + + We can assume that the reload reg was already tested for availability + at the time it is needed, and we should not check this again, + in case the reg has already been marked in use. */ + +static int +reload_reg_reaches_end_p (regno, opnum, type) + int regno; + int opnum; + enum reload_type type; +{ + int i; + + switch (type) + { + case RELOAD_OTHER: + /* Since a RELOAD_OTHER reload claims the reg for the entire insn, + its value must reach the end. */ + return 1; + + /* If this use is for part of the insn, + its value reaches if no subsequent part uses the same register. + Just like the above function, don't try to do this with lots + of fallthroughs. */ + + case RELOAD_FOR_OTHER_ADDRESS: + /* Here we check for everything else, since these don't conflict + with anything else and everything comes later. */ + + for (i = 0; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno)) + return 0; + + return (! TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno) + && ! TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno) + && ! TEST_HARD_REG_BIT (reload_reg_used, regno)); + + case RELOAD_FOR_INPUT_ADDRESS: + /* Similar, except that we check only for this and subsequent inputs + and the address of only subsequent inputs and we do not need + to check for RELOAD_OTHER objects since they are known not to + conflict. */ + + for (i = opnum; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno)) + return 0; + + for (i = opnum + 1; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[i], regno)) + return 0; + + for (i = 0; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno)) + return 0; + + if (TEST_HARD_REG_BIT (reload_reg_used_in_op_addr_reload, regno)) + return 0; + + return (! TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno) + && ! TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno)); + + case RELOAD_FOR_INPUT: + /* Similar to input address, except we start at the next operand for + both input and input address and we do not check for + RELOAD_FOR_OPERAND_ADDRESS and RELOAD_FOR_INSN since these + would conflict. */ + + for (i = opnum + 1; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_input_addr[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_input[i], regno)) + return 0; + + /* ... fall through ... */ + + case RELOAD_FOR_OPERAND_ADDRESS: + /* Check outputs and their addresses. */ + + for (i = 0; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno)) + return 0; + + return 1; + + case RELOAD_FOR_OPADDR_ADDR: + for (i = 0; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno) + || TEST_HARD_REG_BIT (reload_reg_used_in_output[i], regno)) + return 0; + + return (! TEST_HARD_REG_BIT (reload_reg_used_in_op_addr, regno) + && !TEST_HARD_REG_BIT (reload_reg_used_in_insn, regno)); + + case RELOAD_FOR_INSN: + /* These conflict with other outputs with RELOAD_OTHER. So + we need only check for output addresses. */ + + opnum = -1; + + /* ... fall through ... */ + + case RELOAD_FOR_OUTPUT: + case RELOAD_FOR_OUTPUT_ADDRESS: + /* We already know these can't conflict with a later output. So the + only thing to check are later output addresses. */ + for (i = opnum + 1; i < reload_n_operands; i++) + if (TEST_HARD_REG_BIT (reload_reg_used_in_output_addr[i], regno)) + return 0; + + return 1; + } + + abort (); +} + +/* Return 1 if the reloads denoted by R1 and R2 cannot share a register. + Return 0 otherwise. + + This function uses the same algorithm as reload_reg_free_p above. */ + +static int +reloads_conflict (r1, r2) + int r1, r2; +{ + enum reload_type r1_type = reload_when_needed[r1]; + enum reload_type r2_type = reload_when_needed[r2]; + int r1_opnum = reload_opnum[r1]; + int r2_opnum = reload_opnum[r2]; + + /* RELOAD_OTHER conflicts with everything except RELOAD_FOR_OTHER_ADDRESS. */ + + if (r2_type == RELOAD_OTHER && r1_type != RELOAD_FOR_OTHER_ADDRESS) + return 1; + + /* Otherwise, check conflicts differently for each type. */ + + switch (r1_type) + { + case RELOAD_FOR_INPUT: + return (r2_type == RELOAD_FOR_INSN + || r2_type == RELOAD_FOR_OPERAND_ADDRESS + || r2_type == RELOAD_FOR_OPADDR_ADDR + || r2_type == RELOAD_FOR_INPUT + || (r2_type == RELOAD_FOR_INPUT_ADDRESS && r2_opnum > r1_opnum)); + + case RELOAD_FOR_INPUT_ADDRESS: + return ((r2_type == RELOAD_FOR_INPUT_ADDRESS && r1_opnum == r2_opnum) + || (r2_type == RELOAD_FOR_INPUT && r2_opnum < r1_opnum)); + + case RELOAD_FOR_OUTPUT_ADDRESS: + return ((r2_type == RELOAD_FOR_OUTPUT_ADDRESS && r2_opnum == r1_opnum) + || (r2_type == RELOAD_FOR_OUTPUT && r2_opnum >= r1_opnum)); + + case RELOAD_FOR_OPERAND_ADDRESS: + return (r2_type == RELOAD_FOR_INPUT || r2_type == RELOAD_FOR_INSN + || r2_type == RELOAD_FOR_OPERAND_ADDRESS); + + case RELOAD_FOR_OPADDR_ADDR: + return (r2_type == RELOAD_FOR_INPUT + || r2_type == RELOAD_FOR_OPADDR_ADDR); + + case RELOAD_FOR_OUTPUT: + return (r2_type == RELOAD_FOR_INSN || r2_type == RELOAD_FOR_OUTPUT + || (r2_type == RELOAD_FOR_OUTPUT_ADDRESS + && r2_opnum >= r1_opnum)); + + case RELOAD_FOR_INSN: + return (r2_type == RELOAD_FOR_INPUT || r2_type == RELOAD_FOR_OUTPUT + || r2_type == RELOAD_FOR_INSN + || r2_type == RELOAD_FOR_OPERAND_ADDRESS); + + case RELOAD_FOR_OTHER_ADDRESS: + return r2_type == RELOAD_FOR_OTHER_ADDRESS; + + case RELOAD_OTHER: + return r2_type != RELOAD_FOR_OTHER_ADDRESS; + + default: + abort (); + } +} + +/* Vector of reload-numbers showing the order in which the reloads should + be processed. */ +short reload_order[MAX_RELOADS]; + +/* Indexed by reload number, 1 if incoming value + inherited from previous insns. */ +char reload_inherited[MAX_RELOADS]; + +/* For an inherited reload, this is the insn the reload was inherited from, + if we know it. Otherwise, this is 0. */ +rtx reload_inheritance_insn[MAX_RELOADS]; + +/* If non-zero, this is a place to get the value of the reload, + rather than using reload_in. */ +rtx reload_override_in[MAX_RELOADS]; + +/* For each reload, the index in spill_regs of the spill register used, + or -1 if we did not need one of the spill registers for this reload. */ +int reload_spill_index[MAX_RELOADS]; + +/* Index of last register assigned as a spill register. We allocate in + a round-robin fashio. */ + +static int last_spill_reg = 0; + +/* Find a spill register to use as a reload register for reload R. + LAST_RELOAD is non-zero if this is the last reload for the insn being + processed. + + Set reload_reg_rtx[R] to the register allocated. + + If NOERROR is nonzero, we return 1 if successful, + or 0 if we couldn't find a spill reg and we didn't change anything. */ + +static int +allocate_reload_reg (r, insn, last_reload, noerror) + int r; + rtx insn; + int last_reload; + int noerror; +{ + int i; + int pass; + int count; + rtx new; + int regno; + + /* If we put this reload ahead, thinking it is a group, + then insist on finding a group. Otherwise we can grab a + reg that some other reload needs. + (That can happen when we have a 68000 DATA_OR_FP_REG + which is a group of data regs or one fp reg.) + We need not be so restrictive if there are no more reloads + for this insn. + + ??? Really it would be nicer to have smarter handling + for that kind of reg class, where a problem like this is normal. + Perhaps those classes should be avoided for reloading + by use of more alternatives. */ + + int force_group = reload_nregs[r] > 1 && ! last_reload; + + /* If we want a single register and haven't yet found one, + take any reg in the right class and not in use. + If we want a consecutive group, here is where we look for it. + + We use two passes so we can first look for reload regs to + reuse, which are already in use for other reloads in this insn, + and only then use additional registers. + I think that maximizing reuse is needed to make sure we don't + run out of reload regs. Suppose we have three reloads, and + reloads A and B can share regs. These need two regs. + Suppose A and B are given different regs. + That leaves none for C. */ + for (pass = 0; pass < 2; pass++) + { + /* I is the index in spill_regs. + We advance it round-robin between insns to use all spill regs + equally, so that inherited reloads have a chance + of leapfrogging each other. Don't do this, however, when we have + group needs and failure would be fatal; if we only have a relatively + small number of spill registers, and more than one of them has + group needs, then by starting in the middle, we may end up + allocating the first one in such a way that we are not left with + sufficient groups to handle the rest. */ + + if (noerror || ! force_group) + i = last_spill_reg; + else + i = -1; + + for (count = 0; count < n_spills; count++) + { + int class = (int) reload_reg_class[r]; + + i = (i + 1) % n_spills; + + if (reload_reg_free_p (spill_regs[i], reload_opnum[r], + reload_when_needed[r]) + && TEST_HARD_REG_BIT (reg_class_contents[class], spill_regs[i]) + && HARD_REGNO_MODE_OK (spill_regs[i], reload_mode[r]) + /* Look first for regs to share, then for unshared. But + don't share regs used for inherited reloads; they are + the ones we want to preserve. */ + && (pass + || (TEST_HARD_REG_BIT (reload_reg_used_at_all, + spill_regs[i]) + && ! TEST_HARD_REG_BIT (reload_reg_used_for_inherit, + spill_regs[i])))) + { + int nr = HARD_REGNO_NREGS (spill_regs[i], reload_mode[r]); + /* Avoid the problem where spilling a GENERAL_OR_FP_REG + (on 68000) got us two FP regs. If NR is 1, + we would reject both of them. */ + if (force_group) + nr = CLASS_MAX_NREGS (reload_reg_class[r], reload_mode[r]); + /* If we need only one reg, we have already won. */ + if (nr == 1) + { + /* But reject a single reg if we demand a group. */ + if (force_group) + continue; + break; + } + /* Otherwise check that as many consecutive regs as we need + are available here. + Also, don't use for a group registers that are + needed for nongroups. */ + if (! TEST_HARD_REG_BIT (counted_for_nongroups, spill_regs[i])) + while (nr > 1) + { + regno = spill_regs[i] + nr - 1; + if (!(TEST_HARD_REG_BIT (reg_class_contents[class], regno) + && spill_reg_order[regno] >= 0 + && reload_reg_free_p (regno, reload_opnum[r], + reload_when_needed[r]) + && ! TEST_HARD_REG_BIT (counted_for_nongroups, + regno))) + break; + nr--; + } + if (nr == 1) + break; + } + } + + /* If we found something on pass 1, omit pass 2. */ + if (count < n_spills) + break; + } + + /* We should have found a spill register by now. */ + if (count == n_spills) + { + if (noerror) + return 0; + goto failure; + } + + /* I is the index in SPILL_REG_RTX of the reload register we are to + allocate. Get an rtx for it and find its register number. */ + + new = spill_reg_rtx[i]; + + if (new == 0 || GET_MODE (new) != reload_mode[r]) + spill_reg_rtx[i] = new + = gen_rtx (REG, reload_mode[r], spill_regs[i]); + + regno = true_regnum (new); + + /* Detect when the reload reg can't hold the reload mode. + This used to be one `if', but Sequent compiler can't handle that. */ + if (HARD_REGNO_MODE_OK (regno, reload_mode[r])) + { + enum machine_mode test_mode = VOIDmode; + if (reload_in[r]) + test_mode = GET_MODE (reload_in[r]); + /* If reload_in[r] has VOIDmode, it means we will load it + in whatever mode the reload reg has: to wit, reload_mode[r]. + We have already tested that for validity. */ + /* Aside from that, we need to test that the expressions + to reload from or into have modes which are valid for this + reload register. Otherwise the reload insns would be invalid. */ + if (! (reload_in[r] != 0 && test_mode != VOIDmode + && ! HARD_REGNO_MODE_OK (regno, test_mode))) + if (! (reload_out[r] != 0 + && ! HARD_REGNO_MODE_OK (regno, GET_MODE (reload_out[r])))) + { + /* The reg is OK. */ + last_spill_reg = i; + + /* Mark as in use for this insn the reload regs we use + for this. */ + mark_reload_reg_in_use (spill_regs[i], reload_opnum[r], + reload_when_needed[r], reload_mode[r]); + + reload_reg_rtx[r] = new; + reload_spill_index[r] = i; + return 1; + } + } + + /* The reg is not OK. */ + if (noerror) + return 0; + + failure: + if (asm_noperands (PATTERN (insn)) < 0) + /* It's the compiler's fault. */ + abort (); + + /* It's the user's fault; the operand's mode and constraint + don't match. Disable this reload so we don't crash in final. */ + error_for_asm (insn, + "`asm' operand constraint incompatible with operand size"); + reload_in[r] = 0; + reload_out[r] = 0; + reload_reg_rtx[r] = 0; + reload_optional[r] = 1; + reload_secondary_p[r] = 1; + + return 1; +} + +/* Assign hard reg targets for the pseudo-registers we must reload + into hard regs for this insn. + Also output the instructions to copy them in and out of the hard regs. + + For machines with register classes, we are responsible for + finding a reload reg in the proper class. */ + +static void +choose_reload_regs (insn, avoid_return_reg) + rtx insn; + rtx avoid_return_reg; +{ + register int i, j; + int max_group_size = 1; + enum reg_class group_class = NO_REGS; + int inheritance; + + rtx save_reload_reg_rtx[MAX_RELOADS]; + char save_reload_inherited[MAX_RELOADS]; + rtx save_reload_inheritance_insn[MAX_RELOADS]; + rtx save_reload_override_in[MAX_RELOADS]; + int save_reload_spill_index[MAX_RELOADS]; + HARD_REG_SET save_reload_reg_used; + HARD_REG_SET save_reload_reg_used_in_input_addr[MAX_RECOG_OPERANDS]; + HARD_REG_SET save_reload_reg_used_in_output_addr[MAX_RECOG_OPERANDS]; + HARD_REG_SET save_reload_reg_used_in_input[MAX_RECOG_OPERANDS]; + HARD_REG_SET save_reload_reg_used_in_output[MAX_RECOG_OPERANDS]; + HARD_REG_SET save_reload_reg_used_in_op_addr; + HARD_REG_SET save_reload_reg_used_in_op_addr_reload; + HARD_REG_SET save_reload_reg_used_in_insn; + HARD_REG_SET save_reload_reg_used_in_other_addr; + HARD_REG_SET save_reload_reg_used_at_all; + + bzero (reload_inherited, MAX_RELOADS); + bzero ((char *) reload_inheritance_insn, MAX_RELOADS * sizeof (rtx)); + bzero ((char *) reload_override_in, MAX_RELOADS * sizeof (rtx)); + + CLEAR_HARD_REG_SET (reload_reg_used); + CLEAR_HARD_REG_SET (reload_reg_used_at_all); + CLEAR_HARD_REG_SET (reload_reg_used_in_op_addr); + CLEAR_HARD_REG_SET (reload_reg_used_in_op_addr_reload); + CLEAR_HARD_REG_SET (reload_reg_used_in_insn); + CLEAR_HARD_REG_SET (reload_reg_used_in_other_addr); + + for (i = 0; i < reload_n_operands; i++) + { + CLEAR_HARD_REG_SET (reload_reg_used_in_output[i]); + CLEAR_HARD_REG_SET (reload_reg_used_in_input[i]); + CLEAR_HARD_REG_SET (reload_reg_used_in_input_addr[i]); + CLEAR_HARD_REG_SET (reload_reg_used_in_output_addr[i]); + } + +#ifdef SMALL_REGISTER_CLASSES + /* Don't bother with avoiding the return reg + if we have no mandatory reload that could use it. */ + if (avoid_return_reg) + { + int do_avoid = 0; + int regno = REGNO (avoid_return_reg); + int nregs + = HARD_REGNO_NREGS (regno, GET_MODE (avoid_return_reg)); + int r; + + for (r = regno; r < regno + nregs; r++) + if (spill_reg_order[r] >= 0) + for (j = 0; j < n_reloads; j++) + if (!reload_optional[j] && reload_reg_rtx[j] == 0 + && (reload_in[j] != 0 || reload_out[j] != 0 + || reload_secondary_p[j]) + && + TEST_HARD_REG_BIT (reg_class_contents[(int) reload_reg_class[j]], r)) + do_avoid = 1; + if (!do_avoid) + avoid_return_reg = 0; + } +#endif /* SMALL_REGISTER_CLASSES */ + +#if 0 /* Not needed, now that we can always retry without inheritance. */ + /* See if we have more mandatory reloads than spill regs. + If so, then we cannot risk optimizations that could prevent + reloads from sharing one spill register. + + Since we will try finding a better register than reload_reg_rtx + unless it is equal to reload_in or reload_out, count such reloads. */ + + { + int tem = 0; +#ifdef SMALL_REGISTER_CLASSES + int tem = (avoid_return_reg != 0); +#endif + for (j = 0; j < n_reloads; j++) + if (! reload_optional[j] + && (reload_in[j] != 0 || reload_out[j] != 0 || reload_secondary_p[j]) + && (reload_reg_rtx[j] == 0 + || (! rtx_equal_p (reload_reg_rtx[j], reload_in[j]) + && ! rtx_equal_p (reload_reg_rtx[j], reload_out[j])))) + tem++; + if (tem > n_spills) + must_reuse = 1; + } +#endif + +#ifdef SMALL_REGISTER_CLASSES + /* Don't use the subroutine call return reg for a reload + if we are supposed to avoid it. */ + if (avoid_return_reg) + { + int regno = REGNO (avoid_return_reg); + int nregs + = HARD_REGNO_NREGS (regno, GET_MODE (avoid_return_reg)); + int r; + + for (r = regno; r < regno + nregs; r++) + if (spill_reg_order[r] >= 0) + SET_HARD_REG_BIT (reload_reg_used, r); + } +#endif /* SMALL_REGISTER_CLASSES */ + + /* In order to be certain of getting the registers we need, + we must sort the reloads into order of increasing register class. + Then our grabbing of reload registers will parallel the process + that provided the reload registers. + + Also note whether any of the reloads wants a consecutive group of regs. + If so, record the maximum size of the group desired and what + register class contains all the groups needed by this insn. */ + + for (j = 0; j < n_reloads; j++) + { + reload_order[j] = j; + reload_spill_index[j] = -1; + + reload_mode[j] + = (reload_inmode[j] == VOIDmode + || (GET_MODE_SIZE (reload_outmode[j]) + > GET_MODE_SIZE (reload_inmode[j]))) + ? reload_outmode[j] : reload_inmode[j]; + + reload_nregs[j] = CLASS_MAX_NREGS (reload_reg_class[j], reload_mode[j]); + + if (reload_nregs[j] > 1) + { + max_group_size = MAX (reload_nregs[j], max_group_size); + group_class = reg_class_superunion[(int)reload_reg_class[j]][(int)group_class]; + } + + /* If we have already decided to use a certain register, + don't use it in another way. */ + if (reload_reg_rtx[j]) + mark_reload_reg_in_use (REGNO (reload_reg_rtx[j]), reload_opnum[j], + reload_when_needed[j], reload_mode[j]); + } + + if (n_reloads > 1) + qsort (reload_order, n_reloads, sizeof (short), reload_reg_class_lower); + + bcopy ((char *) reload_reg_rtx, (char *) save_reload_reg_rtx, + sizeof reload_reg_rtx); + bcopy (reload_inherited, save_reload_inherited, sizeof reload_inherited); + bcopy ((char *) reload_inheritance_insn, + (char *) save_reload_inheritance_insn, + sizeof reload_inheritance_insn); + bcopy ((char *) reload_override_in, (char *) save_reload_override_in, + sizeof reload_override_in); + bcopy ((char *) reload_spill_index, (char *) save_reload_spill_index, + sizeof reload_spill_index); + COPY_HARD_REG_SET (save_reload_reg_used, reload_reg_used); + COPY_HARD_REG_SET (save_reload_reg_used_at_all, reload_reg_used_at_all); + COPY_HARD_REG_SET (save_reload_reg_used_in_op_addr, + reload_reg_used_in_op_addr); + + COPY_HARD_REG_SET (save_reload_reg_used_in_op_addr_reload, + reload_reg_used_in_op_addr_reload); + + COPY_HARD_REG_SET (save_reload_reg_used_in_insn, + reload_reg_used_in_insn); + COPY_HARD_REG_SET (save_reload_reg_used_in_other_addr, + reload_reg_used_in_other_addr); + + for (i = 0; i < reload_n_operands; i++) + { + COPY_HARD_REG_SET (save_reload_reg_used_in_output[i], + reload_reg_used_in_output[i]); + COPY_HARD_REG_SET (save_reload_reg_used_in_input[i], + reload_reg_used_in_input[i]); + COPY_HARD_REG_SET (save_reload_reg_used_in_input_addr[i], + reload_reg_used_in_input_addr[i]); + COPY_HARD_REG_SET (save_reload_reg_used_in_output_addr[i], + reload_reg_used_in_output_addr[i]); + } + + /* If -O, try first with inheritance, then turning it off. + If not -O, don't do inheritance. + Using inheritance when not optimizing leads to paradoxes + with fp on the 68k: fp numbers (not NaNs) fail to be equal to themselves + because one side of the comparison might be inherited. */ + + for (inheritance = optimize > 0; inheritance >= 0; inheritance--) + { + /* Process the reloads in order of preference just found. + Beyond this point, subregs can be found in reload_reg_rtx. + + This used to look for an existing reloaded home for all + of the reloads, and only then perform any new reloads. + But that could lose if the reloads were done out of reg-class order + because a later reload with a looser constraint might have an old + home in a register needed by an earlier reload with a tighter constraint. + + To solve this, we make two passes over the reloads, in the order + described above. In the first pass we try to inherit a reload + from a previous insn. If there is a later reload that needs a + class that is a proper subset of the class being processed, we must + also allocate a spill register during the first pass. + + Then make a second pass over the reloads to allocate any reloads + that haven't been given registers yet. */ + + CLEAR_HARD_REG_SET (reload_reg_used_for_inherit); + + for (j = 0; j < n_reloads; j++) + { + register int r = reload_order[j]; + + /* Ignore reloads that got marked inoperative. */ + if (reload_out[r] == 0 && reload_in[r] == 0 && ! reload_secondary_p[r]) + continue; + + /* If find_reloads chose a to use reload_in or reload_out as a reload + register, we don't need to chose one. Otherwise, try even if it found + one since we might save an insn if we find the value lying around. */ + if (reload_in[r] != 0 && reload_reg_rtx[r] != 0 + && (rtx_equal_p (reload_in[r], reload_reg_rtx[r]) + || rtx_equal_p (reload_out[r], reload_reg_rtx[r]))) + continue; + +#if 0 /* No longer needed for correct operation. + It might give better code, or might not; worth an experiment? */ + /* If this is an optional reload, we can't inherit from earlier insns + until we are sure that any non-optional reloads have been allocated. + The following code takes advantage of the fact that optional reloads + are at the end of reload_order. */ + if (reload_optional[r] != 0) + for (i = 0; i < j; i++) + if ((reload_out[reload_order[i]] != 0 + || reload_in[reload_order[i]] != 0 + || reload_secondary_p[reload_order[i]]) + && ! reload_optional[reload_order[i]] + && reload_reg_rtx[reload_order[i]] == 0) + allocate_reload_reg (reload_order[i], insn, 0, inheritance); +#endif + + /* First see if this pseudo is already available as reloaded + for a previous insn. We cannot try to inherit for reloads + that are smaller than the maximum number of registers needed + for groups unless the register we would allocate cannot be used + for the groups. + + We could check here to see if this is a secondary reload for + an object that is already in a register of the desired class. + This would avoid the need for the secondary reload register. + But this is complex because we can't easily determine what + objects might want to be loaded via this reload. So let a register + be allocated here. In `emit_reload_insns' we suppress one of the + loads in the case described above. */ + + if (inheritance) + { + register int regno = -1; + enum machine_mode mode; + + if (reload_in[r] == 0) + ; + else if (GET_CODE (reload_in[r]) == REG) + { + regno = REGNO (reload_in[r]); + mode = GET_MODE (reload_in[r]); + } + else if (GET_CODE (reload_in_reg[r]) == REG) + { + regno = REGNO (reload_in_reg[r]); + mode = GET_MODE (reload_in_reg[r]); + } +#if 0 + /* This won't work, since REGNO can be a pseudo reg number. + Also, it takes much more hair to keep track of all the things + that can invalidate an inherited reload of part of a pseudoreg. */ + else if (GET_CODE (reload_in[r]) == SUBREG + && GET_CODE (SUBREG_REG (reload_in[r])) == REG) + regno = REGNO (SUBREG_REG (reload_in[r])) + SUBREG_WORD (reload_in[r]); +#endif + + if (regno >= 0 && reg_last_reload_reg[regno] != 0) + { + i = spill_reg_order[REGNO (reg_last_reload_reg[regno])]; + + if (reg_reloaded_contents[i] == regno + && (GET_MODE_SIZE (GET_MODE (reg_last_reload_reg[regno])) + >= GET_MODE_SIZE (mode)) + && HARD_REGNO_MODE_OK (spill_regs[i], reload_mode[r]) + && TEST_HARD_REG_BIT (reg_class_contents[(int) reload_reg_class[r]], + spill_regs[i]) + && (reload_nregs[r] == max_group_size + || ! TEST_HARD_REG_BIT (reg_class_contents[(int) group_class], + spill_regs[i])) + && reload_reg_free_p (spill_regs[i], reload_opnum[r], + reload_when_needed[r]) + && reload_reg_free_before_p (spill_regs[i], + reload_opnum[r], + reload_when_needed[r])) + { + /* If a group is needed, verify that all the subsequent + registers still have their values intact. */ + int nr + = HARD_REGNO_NREGS (spill_regs[i], reload_mode[r]); + int k; + + for (k = 1; k < nr; k++) + if (reg_reloaded_contents[spill_reg_order[spill_regs[i] + k]] + != regno) + break; + + if (k == nr) + { + int i1; + + /* We found a register that contains the + value we need. If this register is the + same as an `earlyclobber' operand of the + current insn, just mark it as a place to + reload from since we can't use it as the + reload register itself. */ + + for (i1 = 0; i1 < n_earlyclobbers; i1++) + if (reg_overlap_mentioned_for_reload_p + (reg_last_reload_reg[regno], + reload_earlyclobbers[i1])) + break; + + if (i1 != n_earlyclobbers + /* Don't really use the inherited spill reg + if we need it wider than we've got it. */ + || (GET_MODE_SIZE (reload_mode[r]) + > GET_MODE_SIZE (mode))) + reload_override_in[r] = reg_last_reload_reg[regno]; + else + { + int k; + /* We can use this as a reload reg. */ + /* Mark the register as in use for this part of + the insn. */ + mark_reload_reg_in_use (spill_regs[i], + reload_opnum[r], + reload_when_needed[r], + reload_mode[r]); + reload_reg_rtx[r] = reg_last_reload_reg[regno]; + reload_inherited[r] = 1; + reload_inheritance_insn[r] + = reg_reloaded_insn[i]; + reload_spill_index[r] = i; + for (k = 0; k < nr; k++) + SET_HARD_REG_BIT (reload_reg_used_for_inherit, + spill_regs[i + k]); + } + } + } + } + } + + /* Here's another way to see if the value is already lying around. */ + if (inheritance + && reload_in[r] != 0 + && ! reload_inherited[r] + && reload_out[r] == 0 + && (CONSTANT_P (reload_in[r]) + || GET_CODE (reload_in[r]) == PLUS + || GET_CODE (reload_in[r]) == REG + || GET_CODE (reload_in[r]) == MEM) + && (reload_nregs[r] == max_group_size + || ! reg_classes_intersect_p (reload_reg_class[r], group_class))) + { + register rtx equiv + = find_equiv_reg (reload_in[r], insn, reload_reg_class[r], + -1, NULL_PTR, 0, reload_mode[r]); + int regno; + + if (equiv != 0) + { + if (GET_CODE (equiv) == REG) + regno = REGNO (equiv); + else if (GET_CODE (equiv) == SUBREG) + { + /* This must be a SUBREG of a hard register. + Make a new REG since this might be used in an + address and not all machines support SUBREGs + there. */ + regno = REGNO (SUBREG_REG (equiv)) + SUBREG_WORD (equiv); + equiv = gen_rtx (REG, reload_mode[r], regno); + } + else + abort (); + } + + /* If we found a spill reg, reject it unless it is free + and of the desired class. */ + if (equiv != 0 + && ((spill_reg_order[regno] >= 0 + && ! reload_reg_free_before_p (regno, reload_opnum[r], + reload_when_needed[r])) + || ! TEST_HARD_REG_BIT (reg_class_contents[(int) reload_reg_class[r]], + regno))) + equiv = 0; + + if (equiv != 0 && TEST_HARD_REG_BIT (reload_reg_used_at_all, regno)) + equiv = 0; + + if (equiv != 0 && ! HARD_REGNO_MODE_OK (regno, reload_mode[r])) + equiv = 0; + + /* We found a register that contains the value we need. + If this register is the same as an `earlyclobber' operand + of the current insn, just mark it as a place to reload from + since we can't use it as the reload register itself. */ + + if (equiv != 0) + for (i = 0; i < n_earlyclobbers; i++) + if (reg_overlap_mentioned_for_reload_p (equiv, + reload_earlyclobbers[i])) + { + reload_override_in[r] = equiv; + equiv = 0; + break; + } + + /* JRV: If the equiv register we have found is explicitly + clobbered in the current insn, mark but don't use, as above. */ + + if (equiv != 0 && regno_clobbered_p (regno, insn)) + { + reload_override_in[r] = equiv; + equiv = 0; + } + + /* If we found an equivalent reg, say no code need be generated + to load it, and use it as our reload reg. */ + if (equiv != 0 && regno != HARD_FRAME_POINTER_REGNUM) + { + reload_reg_rtx[r] = equiv; + reload_inherited[r] = 1; + /* If it is a spill reg, + mark the spill reg as in use for this insn. */ + i = spill_reg_order[regno]; + if (i >= 0) + { + int nr = HARD_REGNO_NREGS (regno, reload_mode[r]); + int k; + mark_reload_reg_in_use (regno, reload_opnum[r], + reload_when_needed[r], + reload_mode[r]); + for (k = 0; k < nr; k++) + SET_HARD_REG_BIT (reload_reg_used_for_inherit, regno + k); + } + } + } + + /* If we found a register to use already, or if this is an optional + reload, we are done. */ + if (reload_reg_rtx[r] != 0 || reload_optional[r] != 0) + continue; + +#if 0 /* No longer needed for correct operation. Might or might not + give better code on the average. Want to experiment? */ + + /* See if there is a later reload that has a class different from our + class that intersects our class or that requires less register + than our reload. If so, we must allocate a register to this + reload now, since that reload might inherit a previous reload + and take the only available register in our class. Don't do this + for optional reloads since they will force all previous reloads + to be allocated. Also don't do this for reloads that have been + turned off. */ + + for (i = j + 1; i < n_reloads; i++) + { + int s = reload_order[i]; + + if ((reload_in[s] == 0 && reload_out[s] == 0 + && ! reload_secondary_p[s]) + || reload_optional[s]) + continue; + + if ((reload_reg_class[s] != reload_reg_class[r] + && reg_classes_intersect_p (reload_reg_class[r], + reload_reg_class[s])) + || reload_nregs[s] < reload_nregs[r]) + break; + } + + if (i == n_reloads) + continue; + + allocate_reload_reg (r, insn, j == n_reloads - 1, inheritance); +#endif + } + + /* Now allocate reload registers for anything non-optional that + didn't get one yet. */ + for (j = 0; j < n_reloads; j++) + { + register int r = reload_order[j]; + + /* Ignore reloads that got marked inoperative. */ + if (reload_out[r] == 0 && reload_in[r] == 0 && ! reload_secondary_p[r]) + continue; + + /* Skip reloads that already have a register allocated or are + optional. */ + if (reload_reg_rtx[r] != 0 || reload_optional[r]) + continue; + + if (! allocate_reload_reg (r, insn, j == n_reloads - 1, inheritance)) + break; + } + + /* If that loop got all the way, we have won. */ + if (j == n_reloads) + break; + + fail: + /* Loop around and try without any inheritance. */ + /* First undo everything done by the failed attempt + to allocate with inheritance. */ + bcopy ((char *) save_reload_reg_rtx, (char *) reload_reg_rtx, + sizeof reload_reg_rtx); + bcopy ((char *) save_reload_inherited, (char *) reload_inherited, + sizeof reload_inherited); + bcopy ((char *) save_reload_inheritance_insn, + (char *) reload_inheritance_insn, + sizeof reload_inheritance_insn); + bcopy ((char *) save_reload_override_in, (char *) reload_override_in, + sizeof reload_override_in); + bcopy ((char *) save_reload_spill_index, (char *) reload_spill_index, + sizeof reload_spill_index); + COPY_HARD_REG_SET (reload_reg_used, save_reload_reg_used); + COPY_HARD_REG_SET (reload_reg_used_at_all, save_reload_reg_used_at_all); + COPY_HARD_REG_SET (reload_reg_used_in_op_addr, + save_reload_reg_used_in_op_addr); + COPY_HARD_REG_SET (reload_reg_used_in_op_addr_reload, + save_reload_reg_used_in_op_addr_reload); + COPY_HARD_REG_SET (reload_reg_used_in_insn, + save_reload_reg_used_in_insn); + COPY_HARD_REG_SET (reload_reg_used_in_other_addr, + save_reload_reg_used_in_other_addr); + + for (i = 0; i < reload_n_operands; i++) + { + COPY_HARD_REG_SET (reload_reg_used_in_input[i], + save_reload_reg_used_in_input[i]); + COPY_HARD_REG_SET (reload_reg_used_in_output[i], + save_reload_reg_used_in_output[i]); + COPY_HARD_REG_SET (reload_reg_used_in_input_addr[i], + save_reload_reg_used_in_input_addr[i]); + COPY_HARD_REG_SET (reload_reg_used_in_output_addr[i], + save_reload_reg_used_in_output_addr[i]); + } + } + + /* If we thought we could inherit a reload, because it seemed that + nothing else wanted the same reload register earlier in the insn, + verify that assumption, now that all reloads have been assigned. */ + + for (j = 0; j < n_reloads; j++) + { + register int r = reload_order[j]; + + if (reload_inherited[r] && reload_reg_rtx[r] != 0 + && ! reload_reg_free_before_p (true_regnum (reload_reg_rtx[r]), + reload_opnum[r], + reload_when_needed[r])) + reload_inherited[r] = 0; + + /* If we found a better place to reload from, + validate it in the same fashion, if it is a reload reg. */ + if (reload_override_in[r] + && (GET_CODE (reload_override_in[r]) == REG + || GET_CODE (reload_override_in[r]) == SUBREG)) + { + int regno = true_regnum (reload_override_in[r]); + if (spill_reg_order[regno] >= 0 + && ! reload_reg_free_before_p (regno, reload_opnum[r], + reload_when_needed[r])) + reload_override_in[r] = 0; + } + } + + /* Now that reload_override_in is known valid, + actually override reload_in. */ + for (j = 0; j < n_reloads; j++) + if (reload_override_in[j]) + reload_in[j] = reload_override_in[j]; + + /* If this reload won't be done because it has been cancelled or is + optional and not inherited, clear reload_reg_rtx so other + routines (such as subst_reloads) don't get confused. */ + for (j = 0; j < n_reloads; j++) + if (reload_reg_rtx[j] != 0 + && ((reload_optional[j] && ! reload_inherited[j]) + || (reload_in[j] == 0 && reload_out[j] == 0 + && ! reload_secondary_p[j]))) + { + int regno = true_regnum (reload_reg_rtx[j]); + + if (spill_reg_order[regno] >= 0) + clear_reload_reg_in_use (regno, reload_opnum[j], + reload_when_needed[j], reload_mode[j]); + reload_reg_rtx[j] = 0; + } + + /* Record which pseudos and which spill regs have output reloads. */ + for (j = 0; j < n_reloads; j++) + { + register int r = reload_order[j]; + + i = reload_spill_index[r]; + + /* I is nonneg if this reload used one of the spill regs. + If reload_reg_rtx[r] is 0, this is an optional reload + that we opted to ignore. */ + if (reload_out[r] != 0 && GET_CODE (reload_out[r]) == REG + && reload_reg_rtx[r] != 0) + { + register int nregno = REGNO (reload_out[r]); + int nr = 1; + + if (nregno < FIRST_PSEUDO_REGISTER) + nr = HARD_REGNO_NREGS (nregno, reload_mode[r]); + + while (--nr >= 0) + reg_has_output_reload[nregno + nr] = 1; + + if (i >= 0) + { + nr = HARD_REGNO_NREGS (spill_regs[i], reload_mode[r]); + while (--nr >= 0) + SET_HARD_REG_BIT (reg_is_output_reload, spill_regs[i] + nr); + } + + if (reload_when_needed[r] != RELOAD_OTHER + && reload_when_needed[r] != RELOAD_FOR_OUTPUT + && reload_when_needed[r] != RELOAD_FOR_INSN) + abort (); + } + } +} + +/* If SMALL_REGISTER_CLASSES are defined, we may not have merged two + reloads of the same item for fear that we might not have enough reload + registers. However, normally they will get the same reload register + and hence actually need not be loaded twice. + + Here we check for the most common case of this phenomenon: when we have + a number of reloads for the same object, each of which were allocated + the same reload_reg_rtx, that reload_reg_rtx is not used for any other + reload, and is not modified in the insn itself. If we find such, + merge all the reloads and set the resulting reload to RELOAD_OTHER. + This will not increase the number of spill registers needed and will + prevent redundant code. */ + +#ifdef SMALL_REGISTER_CLASSES + +static void +merge_assigned_reloads (insn) + rtx insn; +{ + int i, j; + + /* Scan all the reloads looking for ones that only load values and + are not already RELOAD_OTHER and ones whose reload_reg_rtx are + assigned and not modified by INSN. */ + + for (i = 0; i < n_reloads; i++) + { + if (reload_in[i] == 0 || reload_when_needed[i] == RELOAD_OTHER + || reload_out[i] != 0 || reload_reg_rtx[i] == 0 + || reg_set_p (reload_reg_rtx[i], insn)) + continue; + + /* Look at all other reloads. Ensure that the only use of this + reload_reg_rtx is in a reload that just loads the same value + as we do. Note that any secondary reloads must be of the identical + class since the values, modes, and result registers are the + same, so we need not do anything with any secondary reloads. */ + + for (j = 0; j < n_reloads; j++) + { + if (i == j || reload_reg_rtx[j] == 0 + || ! reg_overlap_mentioned_p (reload_reg_rtx[j], + reload_reg_rtx[i])) + continue; + + /* If the reload regs aren't exactly the same (e.g, different modes) + or if the values are different, we can't merge anything with this + reload register. */ + + if (! rtx_equal_p (reload_reg_rtx[i], reload_reg_rtx[j]) + || reload_out[j] != 0 || reload_in[j] == 0 + || ! rtx_equal_p (reload_in[i], reload_in[j])) + break; + } + + /* If all is OK, merge the reloads. Only set this to RELOAD_OTHER if + we, in fact, found any matching reloads. */ + + if (j == n_reloads) + { + for (j = 0; j < n_reloads; j++) + if (i != j && reload_reg_rtx[j] != 0 + && rtx_equal_p (reload_reg_rtx[i], reload_reg_rtx[j])) + { + reload_when_needed[i] = RELOAD_OTHER; + reload_in[j] = 0; + transfer_replacements (i, j); + } + + /* If this is now RELOAD_OTHER, look for any reloads that load + parts of this operand and set them to RELOAD_FOR_OTHER_ADDRESS + if they were for inputs, RELOAD_OTHER for outputs. Note that + this test is equivalent to looking for reloads for this operand + number. */ + + if (reload_when_needed[i] == RELOAD_OTHER) + for (j = 0; j < n_reloads; j++) + if (reload_in[j] != 0 + && reload_when_needed[i] != RELOAD_OTHER + && reg_overlap_mentioned_for_reload_p (reload_in[j], + reload_in[i])) + reload_when_needed[j] + = reload_when_needed[i] == RELOAD_FOR_INPUT_ADDRESS + ? RELOAD_FOR_OTHER_ADDRESS : RELOAD_OTHER; + } + } +} +#endif /* SMALL_RELOAD_CLASSES */ + +/* Output insns to reload values in and out of the chosen reload regs. */ + +static void +emit_reload_insns (insn) + rtx insn; +{ + register int j; + rtx input_reload_insns[MAX_RECOG_OPERANDS]; + rtx other_input_address_reload_insns = 0; + rtx other_input_reload_insns = 0; + rtx input_address_reload_insns[MAX_RECOG_OPERANDS]; + rtx output_reload_insns[MAX_RECOG_OPERANDS]; + rtx output_address_reload_insns[MAX_RECOG_OPERANDS]; + rtx operand_reload_insns = 0; + rtx other_operand_reload_insns = 0; + rtx following_insn = NEXT_INSN (insn); + rtx before_insn = insn; + int special; + /* Values to be put in spill_reg_store are put here first. */ + rtx new_spill_reg_store[FIRST_PSEUDO_REGISTER]; + + for (j = 0; j < reload_n_operands; j++) + input_reload_insns[j] = input_address_reload_insns[j] + = output_reload_insns[j] = output_address_reload_insns[j] = 0; + + /* Now output the instructions to copy the data into and out of the + reload registers. Do these in the order that the reloads were reported, + since reloads of base and index registers precede reloads of operands + and the operands may need the base and index registers reloaded. */ + + for (j = 0; j < n_reloads; j++) + { + register rtx old; + rtx oldequiv_reg = 0; + rtx store_insn = 0; + + old = reload_in[j]; + if (old != 0 && ! reload_inherited[j] + && ! rtx_equal_p (reload_reg_rtx[j], old) + && reload_reg_rtx[j] != 0) + { + register rtx reloadreg = reload_reg_rtx[j]; + rtx oldequiv = 0; + enum machine_mode mode; + rtx *where; + + /* Determine the mode to reload in. + This is very tricky because we have three to choose from. + There is the mode the insn operand wants (reload_inmode[J]). + There is the mode of the reload register RELOADREG. + There is the intrinsic mode of the operand, which we could find + by stripping some SUBREGs. + It turns out that RELOADREG's mode is irrelevant: + we can change that arbitrarily. + + Consider (SUBREG:SI foo:QI) as an operand that must be SImode; + then the reload reg may not support QImode moves, so use SImode. + If foo is in memory due to spilling a pseudo reg, this is safe, + because the QImode value is in the least significant part of a + slot big enough for a SImode. If foo is some other sort of + memory reference, then it is impossible to reload this case, + so previous passes had better make sure this never happens. + + Then consider a one-word union which has SImode and one of its + members is a float, being fetched as (SUBREG:SF union:SI). + We must fetch that as SFmode because we could be loading into + a float-only register. In this case OLD's mode is correct. + + Consider an immediate integer: it has VOIDmode. Here we need + to get a mode from something else. + + In some cases, there is a fourth mode, the operand's + containing mode. If the insn specifies a containing mode for + this operand, it overrides all others. + + I am not sure whether the algorithm here is always right, + but it does the right things in those cases. */ + + mode = GET_MODE (old); + if (mode == VOIDmode) + mode = reload_inmode[j]; + +#ifdef SECONDARY_INPUT_RELOAD_CLASS + /* If we need a secondary register for this operation, see if + the value is already in a register in that class. Don't + do this if the secondary register will be used as a scratch + register. */ + + if (reload_secondary_in_reload[j] >= 0 + && reload_secondary_in_icode[j] == CODE_FOR_nothing + && optimize) + oldequiv + = find_equiv_reg (old, insn, + reload_reg_class[reload_secondary_in_reload[j]], + -1, NULL_PTR, 0, mode); +#endif + + /* If reloading from memory, see if there is a register + that already holds the same value. If so, reload from there. + We can pass 0 as the reload_reg_p argument because + any other reload has either already been emitted, + in which case find_equiv_reg will see the reload-insn, + or has yet to be emitted, in which case it doesn't matter + because we will use this equiv reg right away. */ + + if (oldequiv == 0 && optimize + && (GET_CODE (old) == MEM + || (GET_CODE (old) == REG + && REGNO (old) >= FIRST_PSEUDO_REGISTER + && reg_renumber[REGNO (old)] < 0))) + oldequiv = find_equiv_reg (old, insn, ALL_REGS, + -1, NULL_PTR, 0, mode); + + if (oldequiv) + { + int regno = true_regnum (oldequiv); + + /* If OLDEQUIV is a spill register, don't use it for this + if any other reload needs it at an earlier stage of this insn + or at this stage. */ + if (spill_reg_order[regno] >= 0 + && (! reload_reg_free_p (regno, reload_opnum[j], + reload_when_needed[j]) + || ! reload_reg_free_before_p (regno, reload_opnum[j], + reload_when_needed[j]))) + oldequiv = 0; + + /* If OLDEQUIV is not a spill register, + don't use it if any other reload wants it. */ + if (spill_reg_order[regno] < 0) + { + int k; + for (k = 0; k < n_reloads; k++) + if (reload_reg_rtx[k] != 0 && k != j + && reg_overlap_mentioned_for_reload_p (reload_reg_rtx[k], + oldequiv)) + { + oldequiv = 0; + break; + } + } + + /* If it is no cheaper to copy from OLDEQUIV into the + reload register than it would be to move from memory, + don't use it. Likewise, if we need a secondary register + or memory. */ + + if (oldequiv != 0 + && ((REGNO_REG_CLASS (regno) != reload_reg_class[j] + && (REGISTER_MOVE_COST (REGNO_REG_CLASS (regno), + reload_reg_class[j]) + >= MEMORY_MOVE_COST (mode))) +#ifdef SECONDARY_INPUT_RELOAD_CLASS + || (SECONDARY_INPUT_RELOAD_CLASS (reload_reg_class[j], + mode, oldequiv) + != NO_REGS) +#endif +#ifdef SECONDARY_MEMORY_NEEDED + || SECONDARY_MEMORY_NEEDED (reload_reg_class[j], + REGNO_REG_CLASS (regno), + mode) +#endif + )) + oldequiv = 0; + } + + if (oldequiv == 0) + oldequiv = old; + else if (GET_CODE (oldequiv) == REG) + oldequiv_reg = oldequiv; + else if (GET_CODE (oldequiv) == SUBREG) + oldequiv_reg = SUBREG_REG (oldequiv); + + /* If we are reloading from a register that was recently stored in + with an output-reload, see if we can prove there was + actually no need to store the old value in it. */ + + if (optimize && GET_CODE (oldequiv) == REG + && REGNO (oldequiv) < FIRST_PSEUDO_REGISTER + && spill_reg_order[REGNO (oldequiv)] >= 0 + && spill_reg_store[spill_reg_order[REGNO (oldequiv)]] != 0 + && find_reg_note (insn, REG_DEAD, reload_in[j]) + /* This is unsafe if operand occurs more than once in current + insn. Perhaps some occurrences weren't reloaded. */ + && count_occurrences (PATTERN (insn), reload_in[j]) == 1) + delete_output_reload + (insn, j, spill_reg_store[spill_reg_order[REGNO (oldequiv)]]); + + /* Encapsulate both RELOADREG and OLDEQUIV into that mode, + then load RELOADREG from OLDEQUIV. Note that we cannot use + gen_lowpart_common since it can do the wrong thing when + RELOADREG has a multi-word mode. Note that RELOADREG + must always be a REG here. */ + + if (GET_MODE (reloadreg) != mode) + reloadreg = gen_rtx (REG, mode, REGNO (reloadreg)); + while (GET_CODE (oldequiv) == SUBREG && GET_MODE (oldequiv) != mode) + oldequiv = SUBREG_REG (oldequiv); + if (GET_MODE (oldequiv) != VOIDmode + && mode != GET_MODE (oldequiv)) + oldequiv = gen_rtx (SUBREG, mode, oldequiv, 0); + + /* Switch to the right place to emit the reload insns. */ + switch (reload_when_needed[j]) + { + case RELOAD_OTHER: + where = &other_input_reload_insns; + break; + case RELOAD_FOR_INPUT: + where = &input_reload_insns[reload_opnum[j]]; + break; + case RELOAD_FOR_INPUT_ADDRESS: + where = &input_address_reload_insns[reload_opnum[j]]; + break; + case RELOAD_FOR_OUTPUT_ADDRESS: + where = &output_address_reload_insns[reload_opnum[j]]; + break; + case RELOAD_FOR_OPERAND_ADDRESS: + where = &operand_reload_insns; + break; + case RELOAD_FOR_OPADDR_ADDR: + where = &other_operand_reload_insns; + break; + case RELOAD_FOR_OTHER_ADDRESS: + where = &other_input_address_reload_insns; + break; + default: + abort (); + } + + push_to_sequence (*where); + special = 0; + + /* Auto-increment addresses must be reloaded in a special way. */ + if (GET_CODE (oldequiv) == POST_INC + || GET_CODE (oldequiv) == POST_DEC + || GET_CODE (oldequiv) == PRE_INC + || GET_CODE (oldequiv) == PRE_DEC) + { + /* We are not going to bother supporting the case where a + incremented register can't be copied directly from + OLDEQUIV since this seems highly unlikely. */ + if (reload_secondary_in_reload[j] >= 0) + abort (); + /* Prevent normal processing of this reload. */ + special = 1; + /* Output a special code sequence for this case. */ + inc_for_reload (reloadreg, oldequiv, reload_inc[j]); + } + + /* If we are reloading a pseudo-register that was set by the previous + insn, see if we can get rid of that pseudo-register entirely + by redirecting the previous insn into our reload register. */ + + else if (optimize && GET_CODE (old) == REG + && REGNO (old) >= FIRST_PSEUDO_REGISTER + && dead_or_set_p (insn, old) + /* This is unsafe if some other reload + uses the same reg first. */ + && reload_reg_free_before_p (REGNO (reloadreg), + reload_opnum[j], + reload_when_needed[j])) + { + rtx temp = PREV_INSN (insn); + while (temp && GET_CODE (temp) == NOTE) + temp = PREV_INSN (temp); + if (temp + && GET_CODE (temp) == INSN + && GET_CODE (PATTERN (temp)) == SET + && SET_DEST (PATTERN (temp)) == old + /* Make sure we can access insn_operand_constraint. */ + && asm_noperands (PATTERN (temp)) < 0 + /* This is unsafe if prev insn rejects our reload reg. */ + && constraint_accepts_reg_p (insn_operand_constraint[recog_memoized (temp)][0], + reloadreg) + /* This is unsafe if operand occurs more than once in current + insn. Perhaps some occurrences aren't reloaded. */ + && count_occurrences (PATTERN (insn), old) == 1 + /* Don't risk splitting a matching pair of operands. */ + && ! reg_mentioned_p (old, SET_SRC (PATTERN (temp)))) + { + /* Store into the reload register instead of the pseudo. */ + SET_DEST (PATTERN (temp)) = reloadreg; + /* If these are the only uses of the pseudo reg, + pretend for GDB it lives in the reload reg we used. */ + if (reg_n_deaths[REGNO (old)] == 1 + && reg_n_sets[REGNO (old)] == 1) + { + reg_renumber[REGNO (old)] = REGNO (reload_reg_rtx[j]); + alter_reg (REGNO (old), -1); + } + special = 1; + } + } + + /* We can't do that, so output an insn to load RELOADREG. */ + + if (! special) + { +#ifdef SECONDARY_INPUT_RELOAD_CLASS + rtx second_reload_reg = 0; + enum insn_code icode; + + /* If we have a secondary reload, pick up the secondary register + and icode, if any. If OLDEQUIV and OLD are different or + if this is an in-out reload, recompute whether or not we + still need a secondary register and what the icode should + be. If we still need a secondary register and the class or + icode is different, go back to reloading from OLD if using + OLDEQUIV means that we got the wrong type of register. We + cannot have different class or icode due to an in-out reload + because we don't make such reloads when both the input and + output need secondary reload registers. */ + + if (reload_secondary_in_reload[j] >= 0) + { + int secondary_reload = reload_secondary_in_reload[j]; + rtx real_oldequiv = oldequiv; + rtx real_old = old; + + /* If OLDEQUIV is a pseudo with a MEM, get the real MEM + and similarly for OLD. + See comments in get_secondary_reload in reload.c. */ + if (GET_CODE (oldequiv) == REG + && REGNO (oldequiv) >= FIRST_PSEUDO_REGISTER + && reg_equiv_mem[REGNO (oldequiv)] != 0) + real_oldequiv = reg_equiv_mem[REGNO (oldequiv)]; + + if (GET_CODE (old) == REG + && REGNO (old) >= FIRST_PSEUDO_REGISTER + && reg_equiv_mem[REGNO (old)] != 0) + real_old = reg_equiv_mem[REGNO (old)]; + + second_reload_reg = reload_reg_rtx[secondary_reload]; + icode = reload_secondary_in_icode[j]; + + if ((old != oldequiv && ! rtx_equal_p (old, oldequiv)) + || (reload_in[j] != 0 && reload_out[j] != 0)) + { + enum reg_class new_class + = SECONDARY_INPUT_RELOAD_CLASS (reload_reg_class[j], + mode, real_oldequiv); + + if (new_class == NO_REGS) + second_reload_reg = 0; + else + { + enum insn_code new_icode; + enum machine_mode new_mode; + + if (! TEST_HARD_REG_BIT (reg_class_contents[(int) new_class], + REGNO (second_reload_reg))) + oldequiv = old, real_oldequiv = real_old; + else + { + new_icode = reload_in_optab[(int) mode]; + if (new_icode != CODE_FOR_nothing + && ((insn_operand_predicate[(int) new_icode][0] + && ! ((*insn_operand_predicate[(int) new_icode][0]) + (reloadreg, mode))) + || (insn_operand_predicate[(int) new_icode][1] + && ! ((*insn_operand_predicate[(int) new_icode][1]) + (real_oldequiv, mode))))) + new_icode = CODE_FOR_nothing; + + if (new_icode == CODE_FOR_nothing) + new_mode = mode; + else + new_mode = insn_operand_mode[(int) new_icode][2]; + + if (GET_MODE (second_reload_reg) != new_mode) + { + if (!HARD_REGNO_MODE_OK (REGNO (second_reload_reg), + new_mode)) + oldequiv = old, real_oldequiv = real_old; + else + second_reload_reg + = gen_rtx (REG, new_mode, + REGNO (second_reload_reg)); + } + } + } + } + + /* If we still need a secondary reload register, check + to see if it is being used as a scratch or intermediate + register and generate code appropriately. If we need + a scratch register, use REAL_OLDEQUIV since the form of + the insn may depend on the actual address if it is + a MEM. */ + + if (second_reload_reg) + { + if (icode != CODE_FOR_nothing) + { + emit_insn (GEN_FCN (icode) (reloadreg, real_oldequiv, + second_reload_reg)); + special = 1; + } + else + { + /* See if we need a scratch register to load the + intermediate register (a tertiary reload). */ + enum insn_code tertiary_icode + = reload_secondary_in_icode[secondary_reload]; + + if (tertiary_icode != CODE_FOR_nothing) + { + rtx third_reload_reg + = reload_reg_rtx[reload_secondary_in_reload[secondary_reload]]; + + emit_insn ((GEN_FCN (tertiary_icode) + (second_reload_reg, real_oldequiv, + third_reload_reg))); + } + else + gen_input_reload (second_reload_reg, oldequiv, + reload_opnum[j], + reload_when_needed[j]); + + oldequiv = second_reload_reg; + } + } + } +#endif + + if (! special && ! rtx_equal_p (reloadreg, oldequiv)) + gen_input_reload (reloadreg, oldequiv, reload_opnum[j], + reload_when_needed[j]); + +#if defined(SECONDARY_INPUT_RELOAD_CLASS) && defined(PRESERVE_DEATH_INFO_REGNO_P) + /* We may have to make a REG_DEAD note for the secondary reload + register in the insns we just made. Find the last insn that + mentioned the register. */ + if (! special && second_reload_reg + && PRESERVE_DEATH_INFO_REGNO_P (REGNO (second_reload_reg))) + { + rtx prev; + + for (prev = get_last_insn (); prev; + prev = PREV_INSN (prev)) + if (GET_RTX_CLASS (GET_CODE (prev) == 'i') + && reg_overlap_mentioned_for_reload_p (second_reload_reg, + PATTERN (prev))) + { + REG_NOTES (prev) = gen_rtx (EXPR_LIST, REG_DEAD, + second_reload_reg, + REG_NOTES (prev)); + break; + } + } +#endif + } + + /* End this sequence. */ + *where = get_insns (); + end_sequence (); + } + + /* Add a note saying the input reload reg + dies in this insn, if anyone cares. */ +#ifdef PRESERVE_DEATH_INFO_REGNO_P + if (old != 0 + && reload_reg_rtx[j] != old + && reload_reg_rtx[j] != 0 + && reload_out[j] == 0 + && ! reload_inherited[j] + && PRESERVE_DEATH_INFO_REGNO_P (REGNO (reload_reg_rtx[j]))) + { + register rtx reloadreg = reload_reg_rtx[j]; + +#if 0 + /* We can't abort here because we need to support this for sched.c. + It's not terrible to miss a REG_DEAD note, but we should try + to figure out how to do this correctly. */ + /* The code below is incorrect for address-only reloads. */ + if (reload_when_needed[j] != RELOAD_OTHER + && reload_when_needed[j] != RELOAD_FOR_INPUT) + abort (); +#endif + + /* Add a death note to this insn, for an input reload. */ + + if ((reload_when_needed[j] == RELOAD_OTHER + || reload_when_needed[j] == RELOAD_FOR_INPUT) + && ! dead_or_set_p (insn, reloadreg)) + REG_NOTES (insn) + = gen_rtx (EXPR_LIST, REG_DEAD, + reloadreg, REG_NOTES (insn)); + } + + /* When we inherit a reload, the last marked death of the reload reg + may no longer really be a death. */ + if (reload_reg_rtx[j] != 0 + && PRESERVE_DEATH_INFO_REGNO_P (REGNO (reload_reg_rtx[j])) + && reload_inherited[j]) + { + /* Handle inheriting an output reload. + Remove the death note from the output reload insn. */ + if (reload_spill_index[j] >= 0 + && GET_CODE (reload_in[j]) == REG + && spill_reg_store[reload_spill_index[j]] != 0 + && find_regno_note (spill_reg_store[reload_spill_index[j]], + REG_DEAD, REGNO (reload_reg_rtx[j]))) + remove_death (REGNO (reload_reg_rtx[j]), + spill_reg_store[reload_spill_index[j]]); + /* Likewise for input reloads that were inherited. */ + else if (reload_spill_index[j] >= 0 + && GET_CODE (reload_in[j]) == REG + && spill_reg_store[reload_spill_index[j]] == 0 + && reload_inheritance_insn[j] != 0 + && find_regno_note (reload_inheritance_insn[j], REG_DEAD, + REGNO (reload_reg_rtx[j]))) + remove_death (REGNO (reload_reg_rtx[j]), + reload_inheritance_insn[j]); + else + { + rtx prev; + + /* We got this register from find_equiv_reg. + Search back for its last death note and get rid of it. + But don't search back too far. + Don't go past a place where this reg is set, + since a death note before that remains valid. */ + for (prev = PREV_INSN (insn); + prev && GET_CODE (prev) != CODE_LABEL; + prev = PREV_INSN (prev)) + if (GET_RTX_CLASS (GET_CODE (prev)) == 'i' + && dead_or_set_p (prev, reload_reg_rtx[j])) + { + if (find_regno_note (prev, REG_DEAD, + REGNO (reload_reg_rtx[j]))) + remove_death (REGNO (reload_reg_rtx[j]), prev); + break; + } + } + } + + /* We might have used find_equiv_reg above to choose an alternate + place from which to reload. If so, and it died, we need to remove + that death and move it to one of the insns we just made. */ + + if (oldequiv_reg != 0 + && PRESERVE_DEATH_INFO_REGNO_P (true_regnum (oldequiv_reg))) + { + rtx prev, prev1; + + for (prev = PREV_INSN (insn); prev && GET_CODE (prev) != CODE_LABEL; + prev = PREV_INSN (prev)) + if (GET_RTX_CLASS (GET_CODE (prev)) == 'i' + && dead_or_set_p (prev, oldequiv_reg)) + { + if (find_regno_note (prev, REG_DEAD, REGNO (oldequiv_reg))) + { + for (prev1 = this_reload_insn; + prev1; prev1 = PREV_INSN (prev1)) + if (GET_RTX_CLASS (GET_CODE (prev1) == 'i') + && reg_overlap_mentioned_for_reload_p (oldequiv_reg, + PATTERN (prev1))) + { + REG_NOTES (prev1) = gen_rtx (EXPR_LIST, REG_DEAD, + oldequiv_reg, + REG_NOTES (prev1)); + break; + } + remove_death (REGNO (oldequiv_reg), prev); + } + break; + } + } +#endif + + /* If we are reloading a register that was recently stored in with an + output-reload, see if we can prove there was + actually no need to store the old value in it. */ + + if (optimize && reload_inherited[j] && reload_spill_index[j] >= 0 + && reload_in[j] != 0 + && GET_CODE (reload_in[j]) == REG +#if 0 + /* There doesn't seem to be any reason to restrict this to pseudos + and doing so loses in the case where we are copying from a + register of the wrong class. */ + && REGNO (reload_in[j]) >= FIRST_PSEUDO_REGISTER +#endif + && spill_reg_store[reload_spill_index[j]] != 0 + /* This is unsafe if some other reload uses the same reg first. */ + && reload_reg_free_before_p (spill_regs[reload_spill_index[j]], + reload_opnum[j], reload_when_needed[j]) + && dead_or_set_p (insn, reload_in[j]) + /* This is unsafe if operand occurs more than once in current + insn. Perhaps some occurrences weren't reloaded. */ + && count_occurrences (PATTERN (insn), reload_in[j]) == 1) + delete_output_reload (insn, j, + spill_reg_store[reload_spill_index[j]]); + + /* Input-reloading is done. Now do output-reloading, + storing the value from the reload-register after the main insn + if reload_out[j] is nonzero. + + ??? At some point we need to support handling output reloads of + JUMP_INSNs or insns that set cc0. */ + old = reload_out[j]; + if (old != 0 + && reload_reg_rtx[j] != old + && reload_reg_rtx[j] != 0) + { + register rtx reloadreg = reload_reg_rtx[j]; + register rtx second_reloadreg = 0; + rtx note, p; + enum machine_mode mode; + int special = 0; + + /* An output operand that dies right away does need a reload, + but need not be copied from it. Show the new location in the + REG_UNUSED note. */ + if ((GET_CODE (old) == REG || GET_CODE (old) == SCRATCH) + && (note = find_reg_note (insn, REG_UNUSED, old)) != 0) + { + XEXP (note, 0) = reload_reg_rtx[j]; + continue; + } + else if (GET_CODE (old) == SCRATCH) + /* If we aren't optimizing, there won't be a REG_UNUSED note, + but we don't want to make an output reload. */ + continue; + +#if 0 + /* Strip off of OLD any size-increasing SUBREGs such as + (SUBREG:SI foo:QI 0). */ + + while (GET_CODE (old) == SUBREG && SUBREG_WORD (old) == 0 + && (GET_MODE_SIZE (GET_MODE (old)) + > GET_MODE_SIZE (GET_MODE (SUBREG_REG (old))))) + old = SUBREG_REG (old); +#endif + + /* If is a JUMP_INSN, we can't support output reloads yet. */ + if (GET_CODE (insn) == JUMP_INSN) + abort (); + + push_to_sequence (output_reload_insns[reload_opnum[j]]); + + /* Determine the mode to reload in. + See comments above (for input reloading). */ + + mode = GET_MODE (old); + if (mode == VOIDmode) + { + /* VOIDmode should never happen for an output. */ + if (asm_noperands (PATTERN (insn)) < 0) + /* It's the compiler's fault. */ + abort (); + error_for_asm (insn, "output operand is constant in `asm'"); + /* Prevent crash--use something we know is valid. */ + mode = word_mode; + old = gen_rtx (REG, mode, REGNO (reloadreg)); + } + + if (GET_MODE (reloadreg) != mode) + reloadreg = gen_rtx (REG, mode, REGNO (reloadreg)); + +#ifdef SECONDARY_OUTPUT_RELOAD_CLASS + + /* If we need two reload regs, set RELOADREG to the intermediate + one, since it will be stored into OUT. We might need a secondary + register only for an input reload, so check again here. */ + + if (reload_secondary_out_reload[j] >= 0) + { + rtx real_old = old; + + if (GET_CODE (old) == REG && REGNO (old) >= FIRST_PSEUDO_REGISTER + && reg_equiv_mem[REGNO (old)] != 0) + real_old = reg_equiv_mem[REGNO (old)]; + + if((SECONDARY_OUTPUT_RELOAD_CLASS (reload_reg_class[j], + mode, real_old) + != NO_REGS)) + { + second_reloadreg = reloadreg; + reloadreg = reload_reg_rtx[reload_secondary_out_reload[j]]; + + /* See if RELOADREG is to be used as a scratch register + or as an intermediate register. */ + if (reload_secondary_out_icode[j] != CODE_FOR_nothing) + { + emit_insn ((GEN_FCN (reload_secondary_out_icode[j]) + (real_old, second_reloadreg, reloadreg))); + special = 1; + } + else + { + /* See if we need both a scratch and intermediate reload + register. */ + int secondary_reload = reload_secondary_out_reload[j]; + enum insn_code tertiary_icode + = reload_secondary_out_icode[secondary_reload]; + rtx pat; + + if (GET_MODE (reloadreg) != mode) + reloadreg = gen_rtx (REG, mode, REGNO (reloadreg)); + + if (tertiary_icode != CODE_FOR_nothing) + { + rtx third_reloadreg + = reload_reg_rtx[reload_secondary_out_reload[secondary_reload]]; + pat = (GEN_FCN (tertiary_icode) + (reloadreg, second_reloadreg, third_reloadreg)); + } +#ifdef SECONDARY_MEMORY_NEEDED + /* If we need a memory location to do the move, do it that way. */ + else if (GET_CODE (reloadreg) == REG + && REGNO (reloadreg) < FIRST_PSEUDO_REGISTER + && SECONDARY_MEMORY_NEEDED (REGNO_REG_CLASS (REGNO (reloadreg)), + REGNO_REG_CLASS (REGNO (second_reloadreg)), + GET_MODE (second_reloadreg))) + { + /* Get the memory to use and rewrite both registers + to its mode. */ + rtx loc + = get_secondary_mem (reloadreg, + GET_MODE (second_reloadreg), + reload_opnum[j], + reload_when_needed[j]); + rtx tmp_reloadreg; + + if (GET_MODE (loc) != GET_MODE (second_reloadreg)) + second_reloadreg = gen_rtx (REG, GET_MODE (loc), + REGNO (second_reloadreg)); + + if (GET_MODE (loc) != GET_MODE (reloadreg)) + tmp_reloadreg = gen_rtx (REG, GET_MODE (loc), + REGNO (reloadreg)); + else + tmp_reloadreg = reloadreg; + + emit_move_insn (loc, second_reloadreg); + pat = gen_move_insn (tmp_reloadreg, loc); + } +#endif + else + pat = gen_move_insn (reloadreg, second_reloadreg); + + emit_insn (pat); + } + } + } +#endif + + /* Output the last reload insn. */ + if (! special) + { +#ifdef SECONDARY_MEMORY_NEEDED + /* If we need a memory location to do the move, do it that way. */ + if (GET_CODE (old) == REG && REGNO (old) < FIRST_PSEUDO_REGISTER + && SECONDARY_MEMORY_NEEDED (REGNO_REG_CLASS (REGNO (old)), + REGNO_REG_CLASS (REGNO (reloadreg)), + GET_MODE (reloadreg))) + { + /* Get the memory to use and rewrite both registers to + its mode. */ + rtx loc = get_secondary_mem (old, GET_MODE (reloadreg), + reload_opnum[j], + reload_when_needed[j]); + + if (GET_MODE (loc) != GET_MODE (reloadreg)) + reloadreg = gen_rtx (REG, GET_MODE (loc), + REGNO (reloadreg)); + + if (GET_MODE (loc) != GET_MODE (old)) + old = gen_rtx (REG, GET_MODE (loc), REGNO (old)); + + emit_insn (gen_move_insn (loc, reloadreg)); + emit_insn (gen_move_insn (old, loc)); + } + else +#endif + emit_insn (gen_move_insn (old, reloadreg)); + } + +#ifdef PRESERVE_DEATH_INFO_REGNO_P + /* If final will look at death notes for this reg, + put one on the last output-reload insn to use it. Similarly + for any secondary register. */ + if (PRESERVE_DEATH_INFO_REGNO_P (REGNO (reloadreg))) + for (p = get_last_insn (); p; p = PREV_INSN (p)) + if (GET_RTX_CLASS (GET_CODE (p)) == 'i' + && reg_overlap_mentioned_for_reload_p (reloadreg, + PATTERN (p))) + REG_NOTES (p) = gen_rtx (EXPR_LIST, REG_DEAD, + reloadreg, REG_NOTES (p)); + +#ifdef SECONDARY_OUTPUT_RELOAD_CLASS + if (! special + && PRESERVE_DEATH_INFO_REGNO_P (REGNO (second_reloadreg))) + for (p = get_last_insn (); p; p = PREV_INSN (p)) + if (GET_RTX_CLASS (GET_CODE (p)) == 'i' + && reg_overlap_mentioned_for_reload_p (second_reloadreg, + PATTERN (p))) + REG_NOTES (p) = gen_rtx (EXPR_LIST, REG_DEAD, + second_reloadreg, REG_NOTES (p)); +#endif +#endif + /* Look at all insns we emitted, just to be safe. */ + for (p = get_insns (); p; p = NEXT_INSN (p)) + if (GET_RTX_CLASS (GET_CODE (p)) == 'i') + { + /* If this output reload doesn't come from a spill reg, + clear any memory of reloaded copies of the pseudo reg. + If this output reload comes from a spill reg, + reg_has_output_reload will make this do nothing. */ + note_stores (PATTERN (p), forget_old_reloads_1); + + if (reg_mentioned_p (reload_reg_rtx[j], PATTERN (p))) + store_insn = p; + } + + output_reload_insns[reload_opnum[j]] = get_insns (); + end_sequence (); + + } + + if (reload_spill_index[j] >= 0) + new_spill_reg_store[reload_spill_index[j]] = store_insn; + } + + /* Now write all the insns we made for reloads in the order expected by + the allocation functions. Prior to the insn being reloaded, we write + the following reloads: + + RELOAD_FOR_OTHER_ADDRESS reloads for input addresses. + + RELOAD_OTHER reloads. + + For each operand, any RELOAD_FOR_INPUT_ADDRESS reloads followed by + the RELOAD_FOR_INPUT reload for the operand. + + RELOAD_FOR_OPADDR_ADDRS reloads. + + RELOAD_FOR_OPERAND_ADDRESS reloads. + + After the insn being reloaded, we write the following: + + For each operand, any RELOAD_FOR_OUTPUT_ADDRESS reload followed by + the RELOAD_FOR_OUTPUT reload for that operand. */ + + emit_insns_before (other_input_address_reload_insns, before_insn); + emit_insns_before (other_input_reload_insns, before_insn); + + for (j = 0; j < reload_n_operands; j++) + { + emit_insns_before (input_address_reload_insns[j], before_insn); + emit_insns_before (input_reload_insns[j], before_insn); + } + + emit_insns_before (other_operand_reload_insns, before_insn); + emit_insns_before (operand_reload_insns, before_insn); + + for (j = 0; j < reload_n_operands; j++) + { + emit_insns_before (output_address_reload_insns[j], following_insn); + emit_insns_before (output_reload_insns[j], following_insn); + } + + /* Move death notes from INSN + to output-operand-address and output reload insns. */ +#ifdef PRESERVE_DEATH_INFO_REGNO_P + { + rtx insn1; + /* Loop over those insns, last ones first. */ + for (insn1 = PREV_INSN (following_insn); insn1 != insn; + insn1 = PREV_INSN (insn1)) + if (GET_CODE (insn1) == INSN && GET_CODE (PATTERN (insn1)) == SET) + { + rtx source = SET_SRC (PATTERN (insn1)); + rtx dest = SET_DEST (PATTERN (insn1)); + + /* The note we will examine next. */ + rtx reg_notes = REG_NOTES (insn); + /* The place that pointed to this note. */ + rtx *prev_reg_note = ®_NOTES (insn); + + /* If the note is for something used in the source of this + reload insn, or in the output address, move the note. */ + while (reg_notes) + { + rtx next_reg_notes = XEXP (reg_notes, 1); + if (REG_NOTE_KIND (reg_notes) == REG_DEAD + && GET_CODE (XEXP (reg_notes, 0)) == REG + && ((GET_CODE (dest) != REG + && reg_overlap_mentioned_for_reload_p (XEXP (reg_notes, 0), + dest)) + || reg_overlap_mentioned_for_reload_p (XEXP (reg_notes, 0), + source))) + { + *prev_reg_note = next_reg_notes; + XEXP (reg_notes, 1) = REG_NOTES (insn1); + REG_NOTES (insn1) = reg_notes; + } + else + prev_reg_note = &XEXP (reg_notes, 1); + + reg_notes = next_reg_notes; + } + } + } +#endif + + /* For all the spill regs newly reloaded in this instruction, + record what they were reloaded from, so subsequent instructions + can inherit the reloads. + + Update spill_reg_store for the reloads of this insn. + Copy the elements that were updated in the loop above. */ + + for (j = 0; j < n_reloads; j++) + { + register int r = reload_order[j]; + register int i = reload_spill_index[r]; + + /* I is nonneg if this reload used one of the spill regs. + If reload_reg_rtx[r] is 0, this is an optional reload + that we opted to ignore. + + Also ignore reloads that don't reach the end of the insn, + since we will eventually see the one that does. */ + + if (i >= 0 && reload_reg_rtx[r] != 0 + && reload_reg_reaches_end_p (spill_regs[i], reload_opnum[r], + reload_when_needed[r])) + { + /* First, clear out memory of what used to be in this spill reg. + If consecutive registers are used, clear them all. */ + int nr + = HARD_REGNO_NREGS (spill_regs[i], GET_MODE (reload_reg_rtx[r])); + int k; + + for (k = 0; k < nr; k++) + { + reg_reloaded_contents[spill_reg_order[spill_regs[i] + k]] = -1; + reg_reloaded_insn[spill_reg_order[spill_regs[i] + k]] = 0; + } + + /* Maybe the spill reg contains a copy of reload_out. */ + if (reload_out[r] != 0 && GET_CODE (reload_out[r]) == REG) + { + register int nregno = REGNO (reload_out[r]); + int nnr = (nregno >= FIRST_PSEUDO_REGISTER ? 1 + : HARD_REGNO_NREGS (nregno, + GET_MODE (reload_reg_rtx[r]))); + + spill_reg_store[i] = new_spill_reg_store[i]; + reg_last_reload_reg[nregno] = reload_reg_rtx[r]; + + /* If NREGNO is a hard register, it may occupy more than + one register. If it does, say what is in the + rest of the registers assuming that both registers + agree on how many words the object takes. If not, + invalidate the subsequent registers. */ + + if (nregno < FIRST_PSEUDO_REGISTER) + for (k = 1; k < nnr; k++) + reg_last_reload_reg[nregno + k] + = (nr == nnr ? gen_rtx (REG, + reg_raw_mode[REGNO (reload_reg_rtx[r]) + k], + REGNO (reload_reg_rtx[r]) + k) + : 0); + + /* Now do the inverse operation. */ + for (k = 0; k < nr; k++) + { + reg_reloaded_contents[spill_reg_order[spill_regs[i] + k]] + = (nregno >= FIRST_PSEUDO_REGISTER || nr != nnr ? nregno + : nregno + k); + reg_reloaded_insn[spill_reg_order[spill_regs[i] + k]] = insn; + } + } + + /* Maybe the spill reg contains a copy of reload_in. Only do + something if there will not be an output reload for + the register being reloaded. */ + else if (reload_out[r] == 0 + && reload_in[r] != 0 + && ((GET_CODE (reload_in[r]) == REG + && ! reg_has_output_reload[REGNO (reload_in[r])] + || (GET_CODE (reload_in_reg[r]) == REG + && ! reg_has_output_reload[REGNO (reload_in_reg[r])])))) + { + register int nregno; + int nnr; + + if (GET_CODE (reload_in[r]) == REG) + nregno = REGNO (reload_in[r]); + else + nregno = REGNO (reload_in_reg[r]); + + nnr = (nregno >= FIRST_PSEUDO_REGISTER ? 1 + : HARD_REGNO_NREGS (nregno, + GET_MODE (reload_reg_rtx[r]))); + + reg_last_reload_reg[nregno] = reload_reg_rtx[r]; + + if (nregno < FIRST_PSEUDO_REGISTER) + for (k = 1; k < nnr; k++) + reg_last_reload_reg[nregno + k] + = (nr == nnr ? gen_rtx (REG, + reg_raw_mode[REGNO (reload_reg_rtx[r]) + k], + REGNO (reload_reg_rtx[r]) + k) + : 0); + + /* Unless we inherited this reload, show we haven't + recently done a store. */ + if (! reload_inherited[r]) + spill_reg_store[i] = 0; + + for (k = 0; k < nr; k++) + { + reg_reloaded_contents[spill_reg_order[spill_regs[i] + k]] + = (nregno >= FIRST_PSEUDO_REGISTER || nr != nnr ? nregno + : nregno + k); + reg_reloaded_insn[spill_reg_order[spill_regs[i] + k]] + = insn; + } + } + } + + /* The following if-statement was #if 0'd in 1.34 (or before...). + It's reenabled in 1.35 because supposedly nothing else + deals with this problem. */ + + /* If a register gets output-reloaded from a non-spill register, + that invalidates any previous reloaded copy of it. + But forget_old_reloads_1 won't get to see it, because + it thinks only about the original insn. So invalidate it here. */ + if (i < 0 && reload_out[r] != 0 && GET_CODE (reload_out[r]) == REG) + { + register int nregno = REGNO (reload_out[r]); + int num_regs = HARD_REGNO_NREGS (nregno, GET_MODE (reload_out[r])); + + while (num_regs-- > 0) + reg_last_reload_reg[nregno + num_regs] = 0; + } + } +} + +/* Emit code to perform an input reload of IN to RELOADREG. IN is from + operand OPNUM with reload type TYPE. + + Returns first insn emitted. */ + +rtx +gen_input_reload (reloadreg, in, opnum, type) + rtx reloadreg; + rtx in; + int opnum; + enum reload_type type; +{ + rtx last = get_last_insn (); + + /* How to do this reload can get quite tricky. Normally, we are being + asked to reload a simple operand, such as a MEM, a constant, or a pseudo + register that didn't get a hard register. In that case we can just + call emit_move_insn. + + We can also be asked to reload a PLUS that adds a register or a MEM to + another register, constant or MEM. This can occur during frame pointer + elimination and while reloading addresses. This case is handled by + trying to emit a single insn to perform the add. If it is not valid, + we use a two insn sequence. + + Finally, we could be called to handle an 'o' constraint by putting + an address into a register. In that case, we first try to do this + with a named pattern of "reload_load_address". If no such pattern + exists, we just emit a SET insn and hope for the best (it will normally + be valid on machines that use 'o'). + + This entire process is made complex because reload will never + process the insns we generate here and so we must ensure that + they will fit their constraints and also by the fact that parts of + IN might be being reloaded separately and replaced with spill registers. + Because of this, we are, in some sense, just guessing the right approach + here. The one listed above seems to work. + + ??? At some point, this whole thing needs to be rethought. */ + + if (GET_CODE (in) == PLUS + && (GET_CODE (XEXP (in, 0)) == REG + || GET_CODE (XEXP (in, 0)) == MEM) + && (GET_CODE (XEXP (in, 1)) == REG + || CONSTANT_P (XEXP (in, 1)) + || GET_CODE (XEXP (in, 1)) == MEM)) + { + /* We need to compute the sum of a register or a MEM and another + register, constant, or MEM, and put it into the reload + register. The best possible way of doing this is if the machine + has a three-operand ADD insn that accepts the required operands. + + The simplest approach is to try to generate such an insn and see if it + is recognized and matches its constraints. If so, it can be used. + + It might be better not to actually emit the insn unless it is valid, + but we need to pass the insn as an operand to `recog' and + `insn_extract' and it is simpler to emit and then delete the insn if + not valid than to dummy things up. */ + + rtx op0, op1, tem, insn; + int code; + + op0 = find_replacement (&XEXP (in, 0)); + op1 = find_replacement (&XEXP (in, 1)); + + /* Since constraint checking is strict, commutativity won't be + checked, so we need to do that here to avoid spurious failure + if the add instruction is two-address and the second operand + of the add is the same as the reload reg, which is frequently + the case. If the insn would be A = B + A, rearrange it so + it will be A = A + B as constrain_operands expects. */ + + if (GET_CODE (XEXP (in, 1)) == REG + && REGNO (reloadreg) == REGNO (XEXP (in, 1))) + tem = op0, op0 = op1, op1 = tem; + + if (op0 != XEXP (in, 0) || op1 != XEXP (in, 1)) + in = gen_rtx (PLUS, GET_MODE (in), op0, op1); + + insn = emit_insn (gen_rtx (SET, VOIDmode, reloadreg, in)); + code = recog_memoized (insn); + + if (code >= 0) + { + insn_extract (insn); + /* We want constrain operands to treat this insn strictly in + its validity determination, i.e., the way it would after reload + has completed. */ + if (constrain_operands (code, 1)) + return insn; + } + + delete_insns_since (last); + + /* If that failed, we must use a conservative two-insn sequence. + use move to copy constant, MEM, or pseudo register to the reload + register since "move" will be able to handle an arbitrary operand, + unlike add which can't, in general. Then add the registers. + + If there is another way to do this for a specific machine, a + DEFINE_PEEPHOLE should be specified that recognizes the sequence + we emit below. */ + + if (CONSTANT_P (op1) || GET_CODE (op1) == MEM + || (GET_CODE (op1) == REG + && REGNO (op1) >= FIRST_PSEUDO_REGISTER)) + tem = op0, op0 = op1, op1 = tem; + + emit_insn (gen_move_insn (reloadreg, op0)); + + /* If OP0 and OP1 are the same, we can use RELOADREG for OP1. + This fixes a problem on the 32K where the stack pointer cannot + be used as an operand of an add insn. */ + + if (rtx_equal_p (op0, op1)) + op1 = reloadreg; + + insn = emit_insn (gen_add2_insn (reloadreg, op1)); + + /* If that failed, copy the address register to the reload register. + Then add the constant to the reload register. */ + + code = recog_memoized (insn); + + if (code >= 0) + { + insn_extract (insn); + /* We want constrain operands to treat this insn strictly in + its validity determination, i.e., the way it would after reload + has completed. */ + if (constrain_operands (code, 1)) + return insn; + } + + delete_insns_since (last); + + emit_insn (gen_move_insn (reloadreg, op1)); + emit_insn (gen_add2_insn (reloadreg, op0)); + } + +#ifdef SECONDARY_MEMORY_NEEDED + /* If we need a memory location to do the move, do it that way. */ + else if (GET_CODE (in) == REG && REGNO (in) < FIRST_PSEUDO_REGISTER + && SECONDARY_MEMORY_NEEDED (REGNO_REG_CLASS (REGNO (in)), + REGNO_REG_CLASS (REGNO (reloadreg)), + GET_MODE (reloadreg))) + { + /* Get the memory to use and rewrite both registers to its mode. */ + rtx loc = get_secondary_mem (in, GET_MODE (reloadreg), opnum, type); + + if (GET_MODE (loc) != GET_MODE (reloadreg)) + reloadreg = gen_rtx (REG, GET_MODE (loc), REGNO (reloadreg)); + + if (GET_MODE (loc) != GET_MODE (in)) + in = gen_rtx (REG, GET_MODE (loc), REGNO (in)); + + emit_insn (gen_move_insn (loc, in)); + emit_insn (gen_move_insn (reloadreg, loc)); + } +#endif + + /* If IN is a simple operand, use gen_move_insn. */ + else if (GET_RTX_CLASS (GET_CODE (in)) == 'o' || GET_CODE (in) == SUBREG) + emit_insn (gen_move_insn (reloadreg, in)); + +#ifdef HAVE_reload_load_address + else if (HAVE_reload_load_address) + emit_insn (gen_reload_load_address (reloadreg, in)); +#endif + + /* Otherwise, just write (set REGLOADREG IN) and hope for the best. */ + else + emit_insn (gen_rtx (SET, VOIDmode, reloadreg, in)); + + /* Return the first insn emitted. + We can not just return get_last_insn, because there may have + been multiple instructions emitted. Also note that gen_move_insn may + emit more than one insn itself, so we can not assume that there is one + insn emitted per emit_insn_before call. */ + + return last ? NEXT_INSN (last) : get_insns (); +} + +/* Delete a previously made output-reload + whose result we now believe is not needed. + First we double-check. + + INSN is the insn now being processed. + OUTPUT_RELOAD_INSN is the insn of the output reload. + J is the reload-number for this insn. */ + +static void +delete_output_reload (insn, j, output_reload_insn) + rtx insn; + int j; + rtx output_reload_insn; +{ + register rtx i1; + + /* Get the raw pseudo-register referred to. */ + + rtx reg = reload_in[j]; + while (GET_CODE (reg) == SUBREG) + reg = SUBREG_REG (reg); + + /* If the pseudo-reg we are reloading is no longer referenced + anywhere between the store into it and here, + and no jumps or labels intervene, then the value can get + here through the reload reg alone. + Otherwise, give up--return. */ + for (i1 = NEXT_INSN (output_reload_insn); + i1 != insn; i1 = NEXT_INSN (i1)) + { + if (GET_CODE (i1) == CODE_LABEL || GET_CODE (i1) == JUMP_INSN) + return; + if ((GET_CODE (i1) == INSN || GET_CODE (i1) == CALL_INSN) + && reg_mentioned_p (reg, PATTERN (i1))) + return; + } + + if (cannot_omit_stores[REGNO (reg)]) + return; + + /* If this insn will store in the pseudo again, + the previous store can be removed. */ + if (reload_out[j] == reload_in[j]) + delete_insn (output_reload_insn); + + /* See if the pseudo reg has been completely replaced + with reload regs. If so, delete the store insn + and forget we had a stack slot for the pseudo. */ + else if (reg_n_deaths[REGNO (reg)] == 1 + && reg_basic_block[REGNO (reg)] >= 0 + && find_regno_note (insn, REG_DEAD, REGNO (reg))) + { + rtx i2; + + /* We know that it was used only between here + and the beginning of the current basic block. + (We also know that the last use before INSN was + the output reload we are thinking of deleting, but never mind that.) + Search that range; see if any ref remains. */ + for (i2 = PREV_INSN (insn); i2; i2 = PREV_INSN (i2)) + { + rtx set = single_set (i2); + + /* Uses which just store in the pseudo don't count, + since if they are the only uses, they are dead. */ + if (set != 0 && SET_DEST (set) == reg) + continue; + if (GET_CODE (i2) == CODE_LABEL + || GET_CODE (i2) == JUMP_INSN) + break; + if ((GET_CODE (i2) == INSN || GET_CODE (i2) == CALL_INSN) + && reg_mentioned_p (reg, PATTERN (i2))) + /* Some other ref remains; + we can't do anything. */ + return; + } + + /* Delete the now-dead stores into this pseudo. */ + for (i2 = PREV_INSN (insn); i2; i2 = PREV_INSN (i2)) + { + rtx set = single_set (i2); + + if (set != 0 && SET_DEST (set) == reg) + delete_insn (i2); + if (GET_CODE (i2) == CODE_LABEL + || GET_CODE (i2) == JUMP_INSN) + break; + } + + /* For the debugging info, + say the pseudo lives in this reload reg. */ + reg_renumber[REGNO (reg)] = REGNO (reload_reg_rtx[j]); + alter_reg (REGNO (reg), -1); + } +} + +/* Output reload-insns to reload VALUE into RELOADREG. + VALUE is an autoincrement or autodecrement RTX whose operand + is a register or memory location; + so reloading involves incrementing that location. + + INC_AMOUNT is the number to increment or decrement by (always positive). + This cannot be deduced from VALUE. */ + +static void +inc_for_reload (reloadreg, value, inc_amount) + rtx reloadreg; + rtx value; + int inc_amount; +{ + /* REG or MEM to be copied and incremented. */ + rtx incloc = XEXP (value, 0); + /* Nonzero if increment after copying. */ + int post = (GET_CODE (value) == POST_DEC || GET_CODE (value) == POST_INC); + rtx last; + rtx inc; + rtx add_insn; + int code; + + /* No hard register is equivalent to this register after + inc/dec operation. If REG_LAST_RELOAD_REG were non-zero, + we could inc/dec that register as well (maybe even using it for + the source), but I'm not sure it's worth worrying about. */ + if (GET_CODE (incloc) == REG) + reg_last_reload_reg[REGNO (incloc)] = 0; + + if (GET_CODE (value) == PRE_DEC || GET_CODE (value) == POST_DEC) + inc_amount = - inc_amount; + + inc = GEN_INT (inc_amount); + + /* If this is post-increment, first copy the location to the reload reg. */ + if (post) + emit_insn (gen_move_insn (reloadreg, incloc)); + + /* See if we can directly increment INCLOC. Use a method similar to that + in gen_input_reload. */ + + last = get_last_insn (); + add_insn = emit_insn (gen_rtx (SET, VOIDmode, incloc, + gen_rtx (PLUS, GET_MODE (incloc), + incloc, inc))); + + code = recog_memoized (add_insn); + if (code >= 0) + { + insn_extract (add_insn); + if (constrain_operands (code, 1)) + { + /* If this is a pre-increment and we have incremented the value + where it lives, copy the incremented value to RELOADREG to + be used as an address. */ + + if (! post) + emit_insn (gen_move_insn (reloadreg, incloc)); + + return; + } + } + + delete_insns_since (last); + + /* If couldn't do the increment directly, must increment in RELOADREG. + The way we do this depends on whether this is pre- or post-increment. + For pre-increment, copy INCLOC to the reload register, increment it + there, then save back. */ + + if (! post) + { + emit_insn (gen_move_insn (reloadreg, incloc)); + emit_insn (gen_add2_insn (reloadreg, inc)); + emit_insn (gen_move_insn (incloc, reloadreg)); + } + else + { + /* Postincrement. + Because this might be a jump insn or a compare, and because RELOADREG + may not be available after the insn in an input reload, we must do + the incrementation before the insn being reloaded for. + + We have already copied INCLOC to RELOADREG. Increment the copy in + RELOADREG, save that back, then decrement RELOADREG so it has + the original value. */ + + emit_insn (gen_add2_insn (reloadreg, inc)); + emit_insn (gen_move_insn (incloc, reloadreg)); + emit_insn (gen_add2_insn (reloadreg, GEN_INT (-inc_amount))); + } + + return; +} + +/* Return 1 if we are certain that the constraint-string STRING allows + the hard register REG. Return 0 if we can't be sure of this. */ + +static int +constraint_accepts_reg_p (string, reg) + char *string; + rtx reg; +{ + int value = 0; + int regno = true_regnum (reg); + int c; + + /* Initialize for first alternative. */ + value = 0; + /* Check that each alternative contains `g' or `r'. */ + while (1) + switch (c = *string++) + { + case 0: + /* If an alternative lacks `g' or `r', we lose. */ + return value; + case ',': + /* If an alternative lacks `g' or `r', we lose. */ + if (value == 0) + return 0; + /* Initialize for next alternative. */ + value = 0; + break; + case 'g': + case 'r': + /* Any general reg wins for this alternative. */ + if (TEST_HARD_REG_BIT (reg_class_contents[(int) GENERAL_REGS], regno)) + value = 1; + break; + default: + /* Any reg in specified class wins for this alternative. */ + { + enum reg_class class = REG_CLASS_FROM_LETTER (c); + + if (TEST_HARD_REG_BIT (reg_class_contents[(int) class], regno)) + value = 1; + } + } +} + +/* Return the number of places FIND appears within X, but don't count + an occurrence if some SET_DEST is FIND. */ + +static int +count_occurrences (x, find) + register rtx x, find; +{ + register int i, j; + register enum rtx_code code; + register char *format_ptr; + int count; + + if (x == find) + return 1; + if (x == 0) + return 0; + + code = GET_CODE (x); + + switch (code) + { + case REG: + case QUEUED: + case CONST_INT: + case CONST_DOUBLE: + case SYMBOL_REF: + case CODE_LABEL: + case PC: + case CC0: + return 0; + + case SET: + if (SET_DEST (x) == find) + return count_occurrences (SET_SRC (x), find); + break; + } + + format_ptr = GET_RTX_FORMAT (code); + count = 0; + + for (i = 0; i < GET_RTX_LENGTH (code); i++) + { + switch (*format_ptr++) + { + case 'e': + count += count_occurrences (XEXP (x, i), find); + break; + + case 'E': + if (XVEC (x, i) != NULL) + { + for (j = 0; j < XVECLEN (x, i); j++) + count += count_occurrences (XVECEXP (x, i, j), find); + } + break; + } + } + return count; +} |