diff options
Diffstat (limited to 'gnu/usr.bin/as/config/i386.h')
| -rw-r--r-- | gnu/usr.bin/as/config/i386.h | 296 |
1 files changed, 0 insertions, 296 deletions
diff --git a/gnu/usr.bin/as/config/i386.h b/gnu/usr.bin/as/config/i386.h deleted file mode 100644 index c569c1c..0000000 --- a/gnu/usr.bin/as/config/i386.h +++ /dev/null @@ -1,296 +0,0 @@ -/* i386.h -- Header file for i386.c - Copyright (C) 1989, Free Software Foundation. - -This file is part of GAS, the GNU Assembler. - -GAS is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GAS is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GAS; see the file COPYING. If not, write to -the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ - -#define MAX_OPERANDS 3 /* max operands per insn */ -#define MAX_PREFIXES 4 /* max prefixes per opcode */ -#define MAX_IMMEDIATE_OPERANDS 2 /* max immediates per insn */ -#define MAX_MEMORY_OPERANDS 2 /* max memory ref per insn - * lcall uses 2 - */ -/* we define the syntax here (modulo base,index,scale syntax) */ -#define REGISTER_PREFIX '%' -#define IMMEDIATE_PREFIX '$' -#define ABSOLUTE_PREFIX '*' -#define PREFIX_SEPERATOR '/' - -#define TWO_BYTE_OPCODE_ESCAPE 0x0f - -/* register numbers */ -#define EBP_REG_NUM 5 -#define ESP_REG_NUM 4 - -/* modrm_byte.regmem for twobyte escape */ -#define ESCAPE_TO_TWO_BYTE_ADDRESSING ESP_REG_NUM -/* index_base_byte.index for no index register addressing */ -#define NO_INDEX_REGISTER ESP_REG_NUM -/* index_base_byte.base for no base register addressing */ -#define NO_BASE_REGISTER EBP_REG_NUM - -/* these are the att as opcode suffixes, making movl --> mov, for example */ -#define DWORD_OPCODE_SUFFIX 'l' -#define WORD_OPCODE_SUFFIX 'w' -#define BYTE_OPCODE_SUFFIX 'b' - -/* modrm.mode = REGMEM_FIELD_HAS_REG when a register is in there */ -#define REGMEM_FIELD_HAS_REG 0x3 /* always = 0x3 */ -#define REGMEM_FIELD_HAS_MEM (~REGMEM_FIELD_HAS_REG) - -#define END_OF_INSN '\0' - -/* -When an operand is read in it is classified by its type. This type includes -all the possible ways an operand can be used. Thus, '%eax' is both 'register -# 0' and 'The Accumulator'. In our language this is expressed by OR'ing -'Reg32' (any 32 bit register) and 'Acc' (the accumulator). -Operands are classified so that we can match given operand types with -the opcode table in i386-opcode.h. - */ -#define Unknown 0x0 -/* register */ -#define Reg8 0x1 /* 8 bit reg */ -#define Reg16 0x2 /* 16 bit reg */ -#define Reg32 0x4 /* 32 bit reg */ -#define Reg (Reg8|Reg16|Reg32) /* gen'l register */ -#define WordReg (Reg16|Reg32) /* for push/pop operands */ -/* immediate */ -#define Imm8 0x8 /* 8 bit immediate */ -#define Imm8S 0x10 /* 8 bit immediate sign extended */ -#define Imm16 0x20 /* 16 bit immediate */ -#define Imm32 0x40 /* 32 bit immediate */ -#define Imm1 0x80 /* 1 bit immediate */ -#define ImmUnknown Imm32 /* for unknown expressions */ -#define Imm (Imm8|Imm8S|Imm16|Imm32) /* gen'l immediate */ -/* memory */ -#define Disp8 0x200 /* 8 bit displacement (for jumps) */ -#define Disp16 0x400 /* 16 bit displacement */ -#define Disp32 0x800 /* 32 bit displacement */ -#define Disp (Disp8|Disp16|Disp32) /* General displacement */ -#define DispUnknown Disp32 /* for unknown size displacements */ -#define Mem8 0x1000 -#define Mem16 0x2000 -#define Mem32 0x4000 -#define BaseIndex 0x8000 -#define Mem (Disp|Mem8|Mem16|Mem32|BaseIndex) /* General memory */ -#define WordMem (Mem16|Mem32|Disp|BaseIndex) -#define ByteMem (Mem8|Disp|BaseIndex) -/* specials */ -#define InOutPortReg 0x10000 /* register to hold in/out port addr = dx */ -#define ShiftCount 0x20000 /* register to hold shift cound = cl */ -#define Control 0x40000 /* Control register */ -#define Debug 0x80000 /* Debug register */ -#define Test 0x100000 /* Test register */ -#define FloatReg 0x200000 /* Float register */ -#define FloatAcc 0x400000 /* Float stack top %st(0) */ -#define SReg2 0x800000 /* 2 bit segment register */ -#define SReg3 0x1000000 /* 3 bit segment register */ -#define Acc 0x2000000 /* Accumulator %al or %ax or %eax */ -#define ImplicitRegister (InOutPortReg|ShiftCount|Acc|FloatAcc) -#define JumpAbsolute 0x4000000 -#define Abs8 0x08000000 -#define Abs16 0x10000000 -#define Abs32 0x20000000 -#define Abs (Abs8|Abs16|Abs32) - -#define MODE_FROM_DISP_SIZE(t) \ - ((t&(Disp8)) ? 1 : \ - ((t&(Disp32)) ? 2 : 0)) - -#define Byte (Reg8|Imm8|Imm8S) -#define Word (Reg16|Imm16) -#define DWord (Reg32|Imm32) - -/* convert opcode suffix ('b' 'w' 'l' typically) into type specifyer */ -#define OPCODE_SUFFIX_TO_TYPE(s) \ - (s == BYTE_OPCODE_SUFFIX ? Byte : \ - (s == WORD_OPCODE_SUFFIX ? Word : DWord)) - -#define FITS_IN_SIGNED_BYTE(num) ((num) >= -128 && (num) <= 127) -#define FITS_IN_UNSIGNED_BYTE(num) ((num) >= 0 && (num) <= 255) -#define FITS_IN_UNSIGNED_WORD(num) ((num) >= 0 && (num) <= 65535) -#define FITS_IN_SIGNED_WORD(num) ((num) >= -32768 && (num) <= 32767) - -#define SMALLEST_DISP_TYPE(num) \ - FITS_IN_SIGNED_BYTE(num) ? (Disp8|Disp32|Abs8|Abs32) : (Disp32|Abs32) - -#define SMALLEST_IMM_TYPE(num) \ - (num == 1) ? (Imm1|Imm8|Imm8S|Imm16|Imm32): \ - FITS_IN_SIGNED_BYTE(num) ? (Imm8S|Imm8|Imm16|Imm32) : \ - FITS_IN_UNSIGNED_BYTE(num) ? (Imm8|Imm16|Imm32): \ - (FITS_IN_SIGNED_WORD(num)||FITS_IN_UNSIGNED_WORD(num)) ? (Imm16|Imm32) : \ - (Imm32) - -typedef unsigned char uchar; -typedef unsigned int uint; - -typedef struct { - /* instruction name sans width suffix ("mov" for movl insns) */ - char *name; - - /* how many operands */ - uint operands; - - /* base_opcode is the fundamental opcode byte with a optional prefix(es). */ - uint base_opcode; - - /* extension_opcode is the 3 bit extension for group <n> insns. - If this template has no extension opcode (the usual case) use None */ - uchar extension_opcode; -#define None 0xff /* If no extension_opcode is possible. */ - - /* the bits in opcode_modifier are used to generate the final opcode from - the base_opcode. These bits also are used to detect alternate forms of - the same instruction */ - uint opcode_modifier; - -/* opcode_modifier bits: */ -#define W 0x1 /* set if operands are words or dwords */ -#define D 0x2 /* D = 0 if Reg --> Regmem; D = 1 if Regmem --> Reg */ -/* direction flag for floating insns: MUST BE 0x400 */ -#define FloatD 0x400 -/* shorthand */ -#define DW (D|W) -#define ShortForm 0x10 /* register is in low 3 bits of opcode */ -#define ShortFormW 0x20 /* ShortForm and W bit is 0x8 */ -#define Seg2ShortForm 0x40 /* encoding of load segment reg insns */ -#define Seg3ShortForm 0x80 /* fs/gs segment register insns. */ -#define Jump 0x100 /* special case for jump insns. */ -#define JumpInterSegment 0x200 /* special case for intersegment leaps/calls */ -/* 0x400 CANNOT BE USED since it's already used by FloatD above */ -#define DONT_USE 0x400 -#define NoModrm 0x800 -#define Modrm 0x1000 -#define imulKludge 0x2000 -#define JumpByte 0x4000 -#define JumpDword 0x8000 -#define ReverseRegRegmem 0x10000 - - /* (opcode_modifier & COMES_IN_ALL_SIZES) is true if the - instuction comes in byte, word, and dword sizes and is encoded into - machine code in the canonical way. */ -#define COMES_IN_ALL_SIZES (W) - - /* (opcode_modifier & COMES_IN_BOTH_DIRECTIONS) indicates that the - source and destination operands can be reversed by setting either - the D (for integer insns) or the FloatD (for floating insns) bit - in base_opcode. */ -#define COMES_IN_BOTH_DIRECTIONS (D|FloatD) - - /* operand_types[i] describes the type of operand i. This is made - by OR'ing together all of the possible type masks. (e.g. - 'operand_types[i] = Reg|Imm' specifies that operand i can be - either a register or an immediate operand */ - uint operand_types[3]; -} template; - -/* - 'templates' is for grouping together 'template' structures for opcodes - of the same name. This is only used for storing the insns in the grand - ole hash table of insns. - The templates themselves start at START and range up to (but not including) - END. -*/ -typedef struct { - template *start; - template *end; -} templates; - -/* these are for register name --> number & type hash lookup */ -typedef struct { - char * reg_name; - uint reg_type; - uint reg_num; -} reg_entry; - -typedef struct { - char * seg_name; - uint seg_prefix; -} seg_entry; - -/* these are for prefix name --> prefix code hash lookup */ -typedef struct { - char * prefix_name; - uchar prefix_code; -} prefix_entry; - -/* 386 operand encoding bytes: see 386 book for details of this. */ -typedef struct { - unsigned regmem:3; /* codes register or memory operand */ - unsigned reg:3; /* codes register operand (or extended opcode) */ - unsigned mode:2; /* how to interpret regmem & reg */ -} modrm_byte; - -/* 386 opcode byte to code indirect addressing. */ -typedef struct { - unsigned base:3; - unsigned index:3; - unsigned scale:2; -} base_index_byte; - -/* 'md_assemble ()' gathers together information and puts it into a - i386_insn. */ - -typedef struct { - /* TM holds the template for the insn were currently assembling. */ - template tm; - /* SUFFIX holds the opcode suffix (e.g. 'l' for 'movl') if given. */ - char suffix; - /* Operands are coded with OPERANDS, TYPES, DISPS, IMMS, and REGS. */ - - /* OPERANDS gives the number of given operands. */ - uint operands; - - /* REG_OPERANDS, DISP_OPERANDS, MEM_OPERANDS, IMM_OPERANDS give the number of - given register, displacement, memory operands and immediate operands. */ - uint reg_operands, disp_operands, mem_operands, imm_operands; - - /* TYPES [i] is the type (see above #defines) which tells us how to - search through DISPS [i] & IMMS [i] & REGS [i] for the required - operand. */ - uint types [MAX_OPERANDS]; - - /* Displacements (if given) for each operand. */ - expressionS * disps [MAX_OPERANDS]; - - /* Immediate operands (if given) for each operand. */ - expressionS * imms [MAX_OPERANDS]; - - /* Register operands (if given) for each operand. */ - reg_entry * regs [MAX_OPERANDS]; - - /* BASE_REG, INDEX_REG, and LOG2_SCALE_FACTOR are used to encode - the base index byte below. */ - reg_entry * base_reg; - reg_entry * index_reg; - uint log2_scale_factor; - - /* SEG gives the seg_entry of this insn. It is equal to zero unless - an explicit segment override is given. */ - seg_entry * seg; /* segment for memory operands (if given) */ - - /* PREFIX holds all the given prefix opcodes (usually null). - PREFIXES is the size of PREFIX. */ - char prefix [MAX_PREFIXES]; - uint prefixes; - - /* RM and IB are the modrm byte and the base index byte where the addressing - modes of this insn are encoded. */ - - modrm_byte rm; - base_index_byte bi; -} i386_insn; |
