summaryrefslogtreecommitdiffstats
path: root/etc
diff options
context:
space:
mode:
Diffstat (limited to 'etc')
-rw-r--r--etc/Makefile2
-rw-r--r--etc/etc.alpha/MAKEDEV1402
-rw-r--r--etc/etc.i386/MAKEDEV1442
3 files changed, 1 insertions, 2845 deletions
diff --git a/etc/Makefile b/etc/Makefile
index a4e199e..9760fed 100644
--- a/etc/Makefile
+++ b/etc/Makefile
@@ -62,7 +62,7 @@ distribution:
( cd ${.CURDIR}/isdn; ${MAKE} install );\
pwd_mkdb -p -d ${DESTDIR}/etc ${DESTDIR}/etc/master.passwd; \
${INSTALL} -c -o ${BINOWN} -g ${BINGRP} -m 555 \
- MAKEDEV.local etc.${MACHINE_ARCH}/MAKEDEV ${DESTDIR}/dev )
+ MAKEDEV.local MAKEDEV ${DESTDIR}/dev )
(cd ${DESTDIR}/dev; sh MAKEDEV all) ;
(cd ${.CURDIR}/root; \
${INSTALL} -c -o ${BINOWN} -g ${BINGRP} -m 644 dot.cshrc \
diff --git a/etc/etc.alpha/MAKEDEV b/etc/etc.alpha/MAKEDEV
deleted file mode 100644
index ffd8fcb..0000000
--- a/etc/etc.alpha/MAKEDEV
+++ /dev/null
@@ -1,1402 +0,0 @@
-#!/bin/sh -
-#
-# Copyright (c) 1990 The Regents of the University of California.
-# All rights reserved.
-#
-# Written and contributed by W. Jolitz 12/90
-#
-# Redistribution and use in source and binary forms are permitted provided
-# that: (1) source distributions retain this entire copyright notice and
-# comment, and (2) distributions including binaries display the following
-# acknowledgement: ``This product includes software developed by the
-# University of California, Berkeley and its contributors'' in the
-# documentation or other materials provided with the distribution and in
-# all advertising materials mentioning features or use of this software.
-# Neither the name of the University nor the names of its contributors may
-# be used to endorse or promote products derived from this software without
-# specific prior written permission.
-# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-#
-# @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
-#
-# Device "make" file. Valid arguments:
-# all makes all known devices, standard number of units (or close)
-# std standard devices
-# local configuration specific devices
-# mach-4 mach4&lites+devices for Mach's XFree86 distribution
-# (see http://www.cs.hut.fi/lites.html for more info on LITES)
-#
-# Tapes:
-# wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
-# sa* SCSI Sequential Access Devices
-# ft* QIC-40/QIC-80 3M cartridge tape (interfaced
-# via the floppy disk controller)
-#
-# Disks:
-# wd* "Winchester" disk drives (ST506,IDE,ESDI,RLL,...)
-# wfd* "IDE floppy" disk drives (LS-120)
-# fd* "floppy" disk drives (3 1/2", 5 1/4")
-# da* "SCSI Direct Access Devices"
-# cd* "SCSI CD-ROM disks"
-# sd* "SCSI disk", antiquated, use da* instead
-# mcd* "Mitsumi CD-ROM disks"
-# scd* "Sony CD-ROM disks"
-# matcd* "Matsushita (Panasonic) CD-ROM disks"
-# acd* "ATAPI CD-ROM disks"
-# vn* "vnode disks"
-# fla* "M-Systems DiskOnChip"
-#
-# Console ports:
-# vty* virtual console devices for syscons/pcvt/codrv
-#
-# Pointing devices:
-# mse* Logitech and ATI Inport bus mouse
-# psm* PS/2 mouse
-# sysmouse Mousesystems mouse emulator for syscons
-#
-# Time devices:
-# refclock-* serial ports used by xntpd parse refclocks
-#
-# Terminal ports:
-# tty* general purpose serial ports
-# cua* dialout serial ports
-# ttyA* Specialix SI/XIO dialin ports ('*' = number of devices)
-# cuaA* Specialix SI/XIO dialout ports
-# ttyD* Digiboard - 16 dialin ports
-# cuaD* Digiboard - 16 dialout ports
-# ttyR* Rocketport dialin ports
-# cuaR* Rocketport dialout ports
-#
-# Pseudo terminals:
-# pty* set of 32 master and slave pseudo terminals
-# vty* virtual terminals using syscons/pcvt/codrv console
-#
-# Parallel port:
-# lpt* Printer
-# ppi* Parallel port i/o
-# pps* Pulse per second timing interface
-#
-# I2C and SMBus:
-# iic* I2C devices
-# smb* SMBUS devices
-#
-# USB devices:
-# usb* USB bus control device
-# ums* mouse
-# ulpt* printer
-# ugen* generic USB device
-#
-# SCSI devices (other than CD-ROM, tape and disk):
-# ssc The ``super scsi'' device
-# worm* WORM driver
-# pt* Processor Type (HP scanner, as one example)
-# pass* CAM Passthrough device
-#
-# PC-CARD (previously called PCMCIA) support
-# card* PC-CARD slots
-#
-# ISDN devices:
-# i4b isdnd call control device
-# i4bctl debugging control device
-# i4btrc* trace data interface(s), one per passive card
-# i4btel* telephony interface(s)
-# i4bteld* telephony dialout interface(s)
-# i4brbch* raw b channel access device(s)
-#
-# Special purpose devices:
-# apm Advanced Power Management BIOS
-# bpf* packet filter
-# speaker pc speaker
-# tw* xten power controller
-# snd* various sound cards
-# pcaudio PCM audio driver
-# socksys iBCS2 socket system driver
-# vat VAT compatibility audio driver (requires snd*)
-# gsc Genius GS-4500 hand scanner
-# joy pc joystick
-# tun* Tunneling IP device
-# snp* tty snoop devices
-# spigot Video Spigot video acquisition card
-# ctx* Cortex-I video acquisition card
-# meteor* Matrox Meteor video acquisition card (pci)
-# bktr* Bt848 based video acquisition card (pci)
-# labpc* National Instrument's Lab-PC and LAB-PC+
-# perfmon CPU performance-monitoring counters
-# pci PCI configuration-space access from user mode
-# kbd keyboard devices
-#
-# $FreeBSD$
-# from etc.i386 MAKEDEV,v 1.199 1999/05/29 19:36:55 phk Exp
-#
-
-PATH=/sbin:/bin/:/usr/bin:/usr/sbin:$PATH
-umask 77
-
-# Usage: die exitcode msg
-die() {
- echo $2
- exit $1
-}
-
-# Convert integer to partition name
-dkitop() {
- local p
-
- case $1 in
- 0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
- *) p="?";;
- esac
- echo $p
-}
-
-# Convert integer to slice name
-dkitos() {
- local s
-
- case $1 in
- 0) s="";;
- 1) s="";;
- *) s=s$(($1-1));;
- esac
- echo $s
-}
-
-# Convert disk (type, unit, slice, partition) to minor number
-dkminor()
-{
- echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4))
-}
-# Convert tape (ctrl, unit, mode, access) to minor number
-saminor()
-{
- echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
-}
-
-# Override mknod(2) to add extra handling to it.
-mknod() {
- rm -f "$1" || exit 1
- /sbin/mknod "$@" || die 2 "/sbin/mknod $@ failed"
- chown root:wheel "$1" || exit 1
-}
-
-# Convert the last character of a tty name to a minor number.
-ttyminor()
-{
- case $unit in
- [0-9]) m=$unit;;
- a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
- h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
- o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
- v) m=31;;
- *) m="?";;
- esac
- echo $m
-}
-
-# Raw partition for disks
-dkrawpart=2
-
-# Compatibility slice for disks
-dkcompatslice=0
-
-# Raw slice for disks
-dkrawslice=1
-
-# Standard umasks
-disk_umask=037 # allow group operator to read disks
-tape_umask=017 # allow group operator to read/write tapes
-
-for i in $*; do
-case $i in
-
-all)
- sh MAKEDEV std # standard
- sh MAKEDEV fd0 fd1 # bdev, floppy disk
- sh MAKEDEV da0 da1 da2 da3 wd0 wd1 wd2 wd3 # bdev, ordinary disk
- sh MAKEDEV wfd0 # bdev, LS-120 floppy
- sh MAKEDEV vn0 # bdev, virtual disk
- sh MAKEDEV cd0 matcd0 mcd0 scd0 wcd0 # bdev, cdrom
- sh MAKEDEV ft0 sa0 wt0 wst0 # bdev, tape
- sh MAKEDEV vty4 # cdev, virtual tty
- sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty
- sh MAKEDEV pty0 # cdev, pseudo tty
- sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty
- sh MAKEDEV kbd0 # cdev, keyboard
- sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse
- sh MAKEDEV pcaudio speaker # cdev, noise
- sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer
- sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port
- sh MAKEDEV iic0 iic1 # cdev, I2C device
- sh MAKEDEV smb0 smb1 # cdev, SMBus device
- sh MAKEDEV usb usb0 ums0 ulpt0 ugen0 # cdev, USB devices
- sh MAKEDEV bpf0 tun0 # cdev, network
- sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous
- sh MAKEDEV apm card0 card1 card2 card3 # cdev, laptop
- sh MAKEDEV pass4 xpt2 # cdev, CAM
- sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
- sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN
- sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN
- ;;
-
-std)
- mknod console c 0 0; chmod 600 console
- mknod drum c 4 0; chmod 640 drum; chgrp kmem drum
- mknod kmem c 2 1; chmod 640 kmem; chgrp kmem kmem
- mknod mem c 2 0; chmod 640 mem; chgrp kmem mem
- mknod null c 2 2; chmod 666 null
- mknod random c 2 3; chmod 644 random
- mknod urandom c 2 4; chmod 644 urandom
- mknod zero c 2 12; chmod 666 zero
- mknod io c 2 14; chmod 600 io
- mknod tty c 1 0; chmod 666 tty
- mknod klog c 7 0; chmod 600 klog
- mknod stdin c 22 0; chmod 666 stdin
- mknod stdout c 22 1; chmod 666 stdout
- mknod stderr c 22 2; chmod 666 stderr
- mknod pci c 78 0; chmod 644 pci
- mkdir -p fd
- (cd fd && eval `echo "" | awk ' BEGIN { \
- for (i = 0; i < 64; i++) \
- printf("mknod %d c 22 %d;", i, i)}'`)
- chown -R root:wheel fd
- chmod 555 fd
- chmod 666 fd/*
- ;;
-
-mach-4)
- mknod iopl c 22 0
- mknod kbd c 23 0
- mknod mouse c 24 0
- mknod time c 25 0
- mknod timezone c 26 0
- ;;
-
-# Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
-wt*)
- umask $tape_umask
- u=`expr $i : '..\(.*\)'`
- if [ -z "${u}" ]; then u=0; fi
- mknod rwt${u} c 10 `expr 0 + $u` # default density, 512b blocks
- mknod nrwt${u} c 10 `expr 4 + $u`
-# mknod rWt${u} c 10 `expr 64 + $u` # default density, 1024b blocks
-# mknod nrWt${u} c 10 `expr 68 + $u`
- mknod rwt${u}b c 10 `expr 16 + $u` # 60 megabytes
- mknod nrwt${u}b c 10 `expr 20 + $u`
- mknod rwt${u}c c 10 `expr 24 + $u` # 120 megabytes
- mknod nrwt${u}c c 10 `expr 28 + $u`
- mknod rwt${u}d c 10 `expr 32 + $u` # 150 megabytes
- mknod nrwt${u}d c 10 `expr 36 + $u`
-# mknod rwt${u}e c 10 `expr 40 + $u` # 300 megabytes?
-# mknod nrwt${u}e c 10 `expr 44 + $u`
-# mknod rwt${u}f c 10 `expr 48 + $u` # 600 megabytes?
-# mknod nrwt${u}f c 10 `expr 52 + $u`
- chgrp operator r[Ww]t$u nr[Ww]t$u r[Ww]t$u[a-f] nr[Ww]t$u[a-f]
- umask 77
- ;;
-
-# Individual slices.
-ad*s*|sd*s*|da*s*|vn*s*|wd*s*|afd*s*|wfd*s*|fla*s*)
- umask $disk_umask
- case $i in
- ad*s*) name=ad; blk=30; chr=116;;
- afd*s*) name=afd; blk=32; chr=118;;
- fla*s*) name=fla; blk=28; chr=102;;
- sd*s*) name=sd; blk=4; chr=13;;
- da*s*) name=da; blk=4; chr=13;;
- vn*s*) name=vn; blk=15; chr=43;;
- wd*s*) name=wd; blk=0; chr=3;;
- wfd*s*) name=wfd; blk=1; chr=87;;
- esac
- case $i in
- afd*s*|fla*s*|wfd*s*)
- unit=`expr $i : '...\([0-9]*\)s'`
- slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
- part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
- ;;
- *)
- unit=`expr $i : '..\([0-9]*\)s'`
- slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
- part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
- ;;
- esac
- case $unit in
- [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
- case $slice in
- [0-9]|[1-2][0-9]|30)
- oldslice=$slice
- slice=$(($slice+1))
- slicename=`dkitos $slice`
- minor=`dkminor 0 $unit $slice $dkrawpart`
- mknod $name$unit$slicename b $blk $minor
- mknod r$name$unit$slicename c $chr $minor
- case $part in
- [a-h])
- case $oldslice in
- 0) slice=$oldslice ;;
- esac
- for part in 0 1 2 3 4 5 6 7
- do
- minor=`dkminor 0 $unit $slice $part`
- partname=`dkitop $part`
- mknod $name$unit$slicename$partname \
- b $blk $minor
- mknod r$name$unit$slicename$partname \
- c $chr $minor
- done
- ;;
- "")
- ;;
- *)
- echo bad partition for disk in: $i
- ;;
- esac
- chgrp operator $name$unit$slicename* \
- r$name$unit$slicename*
- ;;
- *)
- echo bad slice for disk in: $i
- ;;
- esac
- ;;
- *)
- echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
- ;;
- esac
- umask 77
- ;;
-
-fd*)
- umask $disk_umask
- unit=`expr $i : '..\(.*\)'`
- name=fd; blk=2; chr=9
- case $unit in
- 0|1|2|3)
- mknod ${name}${unit} b $blk `expr $unit '*' 64`
- mknod r${name}${unit} c $chr `expr $unit '*' 64`
- # Fake BSD partitions
- for i in a b c d e f g h
- do
- ln -f ${name}${unit} ${name}${unit}$i
- ln -f r${name}${unit} r${name}${unit}$i
- done
- # User-readable and programmer-readable name sets
-
- mknod ${name}${unit}.1720 b $blk `expr $unit '*' 64 + 1`
- mknod r${name}${unit}.1720 c $chr `expr $unit '*' 64 + 1`
- # ln -f ${name}${unit}.1720 ${name}${unit}135hs21
- # ln -f r${name}${unit}.1720 r${name}${unit}135hs21
-
- mknod ${name}${unit}.1480 b $blk `expr $unit '*' 64 + 2`
- mknod r${name}${unit}.1480 c $chr `expr $unit '*' 64 + 2`
- # ln -f ${name}${unit}.1480 ${name}${unit}135hs18
- # ln -f r${name}${unit}.1480 r${name}${unit}135hs18
- # ln -f ${name}${unit}.1480 ${name}${unit}96hs18
- # ln -f r${name}${unit}.1480 r${name}${unit}96hs18
-
- mknod ${name}${unit}.1440 b $blk `expr $unit '*' 64 + 3`
- mknod r${name}${unit}.1440 c $chr `expr $unit '*' 64 + 3`
- # ln -f ${name}${unit}.1440 ${name}${unit}135
- # ln -f r${name}${unit}.1440 r${name}${unit}135
- # ln -f ${name}${unit}.1440 ${name}${unit}135ds18
- # ln -f r${name}${unit}.1440 r${name}${unit}135ds18
- # ln -f ${name}${unit}.1440 ${name}${unit}96ds18
- # ln -f r${name}${unit}.1440 r${name}${unit}96ds18
-
- mknod ${name}${unit}.1200 b $blk `expr $unit '*' 64 + 4`
- mknod r${name}${unit}.1200 c $chr `expr $unit '*' 64 + 4`
- # ln -f ${name}${unit}.1200 ${name}${unit}96
- # ln -f r${name}${unit}.1200 r${name}${unit}96
- # ln -f ${name}${unit}.1200 ${name}${unit}96ds15
- # ln -f r${name}${unit}.1200 r${name}${unit}96ds15
- # ln -f ${name}${unit}.1200 ${name}${unit}135ds15
- # ln -f r${name}${unit}.1200 r${name}${unit}135ds15
-
- mknod ${name}${unit}.820 b $blk `expr $unit '*' 64 + 5`
- mknod r${name}${unit}.820 c $chr `expr $unit '*' 64 + 5`
- # ln -f ${name}${unit}.820 ${name}${unit}96hs10
- # ln -f r${name}${unit}.820 r${name}${unit}96hs10
- # ln -f ${name}${unit}.820 ${name}${unit}135hs10
- # ln -f r${name}${unit}.820 r${name}${unit}135hs10
-
- mknod ${name}${unit}.800 b $blk `expr $unit '*' 64 + 6`
- mknod r${name}${unit}.800 c $chr `expr $unit '*' 64 + 6`
- # ln -f ${name}${unit}.800 ${name}${unit}96ds10
- # ln -f r${name}${unit}.800 r${name}${unit}96ds10
- # ln -f ${name}${unit}.800 ${name}${unit}135ds10
- # ln -f r${name}${unit}.800 r${name}${unit}135ds10
-
- mknod ${name}${unit}.720 b $blk `expr $unit '*' 64 + 7`
- mknod r${name}${unit}.720 c $chr `expr $unit '*' 64 + 7`
- # ln -f ${name}${unit}.720 ${name}${unit}96ds9
- # ln -f r${name}${unit}.720 r${name}${unit}96ds9
- # ln -f ${name}${unit}.720 ${name}${unit}135ds9
- # ln -f r${name}${unit}.720 r${name}${unit}135ds9
-
- mknod ${name}${unit}.360 b $blk `expr $unit '*' 64 + 8`
- mknod r${name}${unit}.360 c $chr `expr $unit '*' 64 + 8`
- # ln -f ${name}${unit}.360 ${name}${unit}48
- # ln -f r${name}${unit}.360 r${name}${unit}48
- # ln -f ${name}${unit}.360 ${name}${unit}48ds9
- # ln -f r${name}${unit}.360 r${name}${unit}48ds9
-
- chgrp operator ${name}${unit}* r${name}${unit}*
- ;;
- *)
- echo bad unit for disk in: $i
- ;;
- esac
- umask 77
- ;;
-
-ft*)
- umask $tape_umask
- unit=`expr $i : '..\(.*\)'`
- name=ft; blk=2; chr=9
- case $unit in
- 0|1|2|3)
- mknod ${name}${unit} b $blk `expr $unit '*' 64 + 32`
- mknod r${name}${unit} c $chr `expr $unit '*' 64 + 32`
- ln -f ${name}${unit} ${name}${unit}a
- ln -f r${name}${unit} r${name}${unit}a
- chgrp operator ${name}${unit}* r${name}${unit}*
- ;;
- *)
- echo bad unit for tape in: $i
- ;;
- esac
- umask 77
- ;;
-
-ad*|sd*|od*|da*|vn*|wd*|afd*|wfd*|fla*)
- umask $disk_umask
- case $i in
- ad*) name=ad; blk=30; chr=116;;
- afd*) name=afd; blk=32; chr=118;;
- fla*) name=fla; blk=28; chr=102;;
- sd*) name=sd; blk=4; chr=13;;
- od*) name=od; blk=4; chr=13;;
- da*) name=da; blk=4; chr=13;;
- vn*) name=vn; blk=15; chr=43;;
- wd*) name=wd; blk=0; chr=3;;
- wfd*) name=wfd; blk=1; chr=87;;
- esac
- case $i in
- afd*|fla*|wfd*)
- unit=`expr $i : '...\(.*\)'`
- ;;
- *)
- unit=`expr $i : '..\(.*\)'`
- ;;
- esac
- case $unit in
- [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
- for slicepartname in s0h s1 s2 s3 s4
- do
- sh MAKEDEV $name$unit$slicepartname
- done
- ;;
- *)
- echo bad unit for disk in: $i
- ;;
- esac
- umask 77
- ;;
-
-ccd*)
- umask $disk_umask
- name=ccd
- blk=21; chr=74
- unit=`expr $i : '...\(.*\)'`
- case $unit in
- [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
- for part in 0 1 2 3 4 5 6 7
- do
- minor=`dkminor 0 $unit 0 $part`
- partname=`dkitop $part`
- mknod $name$unit$partname b $blk $minor
- mknod r$name$unit$partname c $chr $minor
- done
- chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h]
- ;;
- *)
- echo bad unit for disk in: $i
- ;;
- esac
- umask 77
- ;;
-
-ssc*)
- mknod ssc c 49 0
- ;;
-
-# SCSI processor type driver
-pt[0-9]*)
- chr=61
- name=pt
- unit=`expr $i : 'pt\([0-9][0-9]*\)'`
- if [ -z "${unit}" ]; then
- unit=0
- fi
- unit=`expr $unit + 1 - 1`
- mknod ${name}${unit} c $chr $unit
- ;;
-
-# SCSI target mode sample driver
-targ[0-9]*)
- chr=65
- name=targ
- unit=`expr $i : 'targ\([0-9][0-9]*\)'`
- if [ -z "${unit}" ]; then
- unit=0
- fi
- unit=`expr $unit + 1 - 1`
- mknod ${name}${unit} c $chr $unit
- mknod ${name}.ctl c $chr 0xffff00ff
- ;;
-
-# CAM transport layer device
-xpt*)
- umask 077
- # This major number is temporary
- chr=104
- name=xpt
- units=`expr $i : 'xpt\(.*\)'`
- if [ -z "${units}" ]; then
- units=1
- fi
- eval `echo ${chr} ${units} ${name} |awk \
- '{ c=$1; n=$2; name=$3;} END {
- for (i = 0; i < n; i++)
- printf("rm -f %s%d r%s%d; mknod %s%d c %d %d; \
- chgrp operator %s%d;", \
- name, i, name, i, name, i, c, i, \
- name, i); }'`
- ;;
-# CAM passthrough device
-pass*|uk*)
- umask 077
- # This major number is temporary
- chr=31
- name=pass
- units=`expr $i : 'pass\(.*\)'`
- if [ -z "${units}" ]; then
- units=1
- fi
- eval `echo ${chr} ${units} ${name} |awk \
- '{ c=$1; n=$2; name=$3;} END {
- for (i = 0; i < n; i++)
- printf("rm -f %s%d r%s%d; mknod %s%d c %d %d; \
- chgrp operator %s%d;", \
- name, i, name, i, name, i, c, i, \
- name, i); }'`
- ;;
-pty*)
- class=`expr $i : 'pty\(.*\)'`
- case $class in
- 0) offset=0 name=p;;
- 1) offset=32 name=q;;
- 2) offset=64 name=r;;
- 3) offset=96 name=s;;
-# Note that xterm (at least) only look at p-s.
- 4) offset=128 name=P;;
- 5) offset=160 name=Q;;
- 6) offset=192 name=R;;
- 7) offset=224 name=S;;
- # This still leaves [tuTU].
- *) echo bad unit for pty in: $i;;
- esac
- case $class in
- 0|1|2|3|4|5|6|7)
- umask 0
- eval `echo $offset $name | awk ' { b=0+$1; n=$2 } END { \
- for (i = 0; i < 32; i++) {
- c = substr("0123456789abcdefghijklmnopqrstuv", i + 1, 1); \
- printf("mknod tty%s%s c 5 %d; \
- mknod pty%s%s c 6 %d;", \
- n, c, b+i, \
- n, c, b+i); \
- } \
- }'`
- umask 77
- ;;
- esac
- ;;
-
-sa*)
- umask $tape_umask
- unit=`expr $i : '..\(.*\)'`
- chr=14
-
- case $unit in
- [0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
- mknod rsa${unit}.ctl c $chr `saminor 1 ${unit} 0 0`
- for m in 0 1 2 3
- do
- mknod rsa${unit}.${m} c $chr `saminor 0 ${unit} ${m} 0`
- mknod nrsa${unit}.${m} c $chr `saminor 0 ${unit} ${m} 1`
- mknod ersa${unit}.${m} c $chr `saminor 0 ${unit} ${m} 2`
- chgrp operator rsa${unit}.${m} nrsa${unit}.${m} \
- ersa${unit}.${m}
- done
- ln -f rsa${unit}.0 rsa${unit}
- ln -f nrsa${unit}.0 nrsa${unit}
- ln -f ersa${unit}.0 ersa${unit}
- ;;
- *)
- echo bad unit for tape in: $i
- ;;
- esac
- umask 77
- ;;
-
-ch*)
- umask 37
- unit=`expr $i : '..\(.*\)'`
- case $i in
- ch*) name=ch; chr=17;;
- esac
- case $unit in
- 0|1|2|3|4|5|6)
- mknod ${name}${unit} c $chr $unit
- chgrp operator ${name}${unit}
- ;;
- *)
- echo bad unit for media changer in: $i
- ;;
- esac
- umask 77
- ;;
-
-ast*)
- umask 2 ;
- unit=`expr $i : '...\(.*\)'`
- chr=119
- case $unit in
- 0|1|2|3)
- mknod rast${unit} c $chr `expr $unit '*' 8 + 0`
- chgrp operator rast${unit}
- chmod 640 rast${unit}
- ;;
- *)
- echo bad unit for tape in: $i
- ;;
- esac
- umask 77
- ;;
-
-acd*|cd*|mcd*|scd*)
- umask $disk_umask
- case $i in
- acd*) units=`expr $i : '...\(.*\)'`; name=acd; blk=31; chr=117;;
- cd*) units=`expr $i : '..\(.*\)'`; name=cd; blk=6; chr=15;;
- mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; blk=7; chr=29;;
- scd*) units=`expr $i : '...\(.*\)'`; name=scd; blk=16; chr=45;;
- esac
- if [ -z "${units}" -o "${units}" -le 0 ]; then
- units=1
- fi
- if [ "${units}" -le 31 ]; then
- eval `echo ${chr} ${blk} ${units} ${name} |awk \
- '{ c=$1; b=$2; n=$3; name=$4;} END{
- for (i = 0; i < n; i++){
- printf("rm -f %s%d* r%s%d*; \
- mknod %s%da b %d %d; \
- mknod %s%dc b %d %d; \
- mknod r%s%da c %d %d; \
- mknod r%s%dc c %d %d; \
- chgrp operator %s%d* r%s%d*;",
- name, i, name, i,
- name, i, b, (i * 8),
- name, i, b, (i * 8) + 2,
- name, i, c, (i * 8),
- name, i, c, (i * 8) + 2,
- name, i, name, i); }}'`
- else
- echo "$i is invalid -- can't have more than 32 cd devices"
- fi
- umask 77
- ;;
-
-matcd*)
- umask 2
- case $i in
- matcd*) unit=`expr $i : '.....\(.*\)'`; name=matcd; blk=17; chr=46;;
- esac
- case $unit in
- 0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15)
- mknod ${name}${unit}a b $blk `expr $unit '*' 8 + 0`
- mknod ${name}${unit}c b $blk `expr $unit '*' 8 + 2`
- mknod r${name}${unit}a c $chr `expr $unit '*' 8 + 0`
- mknod r${name}${unit}c c $chr `expr $unit '*' 8 + 2`
- chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h]
- chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h]
-
- mknod ${name}${unit}la b $blk `expr $unit '*' 8 + 128`
- mknod ${name}${unit}lc b $blk `expr $unit '*' 8 + 130`
- mknod r${name}${unit}la c $chr `expr $unit '*' 8 + 128`
- mknod r${name}${unit}lc c $chr `expr $unit '*' 8 + 130`
- chgrp operator ${name}${unit}l[a-h] r${name}${unit}l[a-h]
- chmod 640 ${name}${unit}l[a-h] r${name}${unit}l[a-h]
- ;;
- *)
- echo bad unit for disk in: $i
- ;;
- esac
- umask 77
- ;;
-
-wcd?)
- umask 2 ;
- unit=`expr $i : '...\(.*\)'`
- blk=19
- chr=69
- case $unit in
- 0|1|2|3|4|5|6|7)
- mknod wcd${unit}a b $blk `expr $unit '*' 8 + 0`
- mknod rwcd${unit}a c $chr `expr $unit '*' 8 + 0`
- mknod wcd${unit}c b $blk `expr $unit '*' 8 + 2`
- mknod rwcd${unit}c c $chr `expr $unit '*' 8 + 2`
- chgrp operator wcd${unit}[a-h] rwcd${unit}[a-h]
- chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h]
- ;;
- *)
- echo bad unit for disk in: $i
- ;;
- esac
- umask 77
- ;;
-
-wst*)
- umask 2 ;
- unit=`expr $i : '...\(.*\)'`
- chr=90
- case $unit in
- 0|1|2|3)
- mknod rwst${unit} c $chr `expr $unit '*' 8 + 0`
- chgrp operator rwst${unit}
- chmod 640 rwst${unit}
- ;;
- esac
- umask 77
- ;;
-
-iic*)
- unit=`expr $i : 'iic\(.*\)'`
- mknod iic$unit c 105 $unit
- ;;
-
-smb*)
- unit=`expr $i : 'smb\(.*\)'`
- mknod smb$unit c 106 $unit
- ;;
-
-ppi*)
- unit=`expr $i : 'ppi\(.*\)'`
- mknod ppi$unit c 82 $unit
- ;;
-
-pps*)
- unit=`expr $i : 'pps\(.*\)'`
- mknod pps$unit c 89 $unit
- ;;
-
-usb)
- mknod usb c 108 255
- ;;
-
-usb*)
- unit=`expr $i : 'usb\(.*\)'`
- mknod usb$unit c 108 $unit
- ;;
-
-ums*)
- unit=`expr $i : 'ums\(.*\)'`
- mknod ums$unit c 111 $unit
- ;;
-
-ulpt*)
- unit=`expr $i : 'ulpt\(.*\)'`
- mknod ulpt$unit c 113 $unit
- ;;
-
-ugen*)
- unit=`expr $i : 'ugen\([0-9][0-9]*\)'`
- endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
- if [ -z "${unit}" ]; then
- echo $i - Invalid unit number
- fi
- if [ -z "${endpoint}" ]; then
- minor=`expr $unit \* 16`
- mknod ugen$unit c 114 $minor
- else
- minor=`expr $unit \* 16 + $endpoint`
- mknod ugen$unit.$endpoint c 114 $minor
- fi
- ;;
-
-lpt*)
- unit=`expr $i : 'lpt\(.*\)'`
- mknod lpt$unit c 16 $unit
- mknod lpctl$unit c 16 `expr $unit + 128`
- ;;
-
-tw*)
- unit=`expr $i : 'tw\(.*\)'`
- mknod tw$unit c 19 $unit
- chgrp operator tw$unit
- ;;
-
-# Use this to create virtual consoles for syscons, pcvt or codrv
-# ttyv0-b
-# use as MAKEDEV vtyNN to create NN entries
-vty*)
- chr=12
- units=`expr $i : 'vty\(.*\)'`
- eval `echo ${chr} ${units} | awk ' { c=0+$1; n=0+$2 } END {
- for (i = 0; i < n; i++)
- printf("mknod ttyv%01x c %d %d;", i, c, i); }'`
- ln -fs ttyv0 vga # XXX X still needs this pccons relic
- ;;
-
-bpf*)
- nbpf=`expr $i : 'bpf\(.*\)$'`
- unit=0
- while [ $unit -le $nbpf ]; do
- mknod bpf$unit c 23 $unit
- unit=`expr $unit + 1`
- done
- ;;
-
-speaker)
- mknod speaker c 26 0
- ;;
-
-cuaa?|cua?)
- umask 7
- unit=`expr $i : 'cua.*\(.\)$'`
- m=`ttyminor $unit`
- mknod cuaa$unit c 28 `expr $m + 128`
- mknod cuaia$unit c 28 `expr $m + 32 + 128`
- mknod cuala$unit c 28 `expr $m + 64 + 128`
- chown uucp:dialer cua*a$unit
- umask 77
- ;;
-
-tty0?|ttyd?|tty?)
- unit=`expr $i : 'tty.*\(.\)$'`
- m=`ttyminor $unit`
- mknod ttyd$unit c 28 $m
- mknod ttyid$unit c 28 `expr $m + 32`
- mknod ttyld$unit c 28 `expr $m + 64`
- ;;
-
-cuac?)
- umask 7
- portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
- g h i j k l m n o p q r s t u v"
- major=48
- card=`expr $i : 'cua.*\(.\)$'`
- for unit in $portlist
- do
- minor=`ttyminor $unit`
- minor=`expr $card \* 65536 + $minor`
- name=$card$unit
- mknod cuac$name c $major `expr $minor + 128`
- mknod cuaic$name c $major `expr $minor + 32 + 128`
- mknod cualc$name c $major `expr $minor + 64 + 128`
- chown uucp:dialer cuac$name cuaic$name cualc$name
- done
- umask 77
- ;;
-
-ttyc?)
- portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
- g h i j k l m n o p q r s t u v"
- major=48
- card=`expr $i : 'tty.*\(.\)$'`
- for unit in $portlist
- do
- minor=`ttyminor $unit`
- minor=`expr $card \* 65536 + $minor`
- name=$card$unit
- mknod ttyc$name c $major $minor
- mknod ttyic$name c $major `expr $minor + 32`
- mknod ttylc$name c $major `expr $minor + 64`
- done
- ;;
-
-# RISCom8 'rc' driver entries
-
-cuam?)
- umask 7
- unit=`expr $i : 'cua.*\(.\)$'`
- m=`ttyminor $unit`
- mknod cuam$unit c 63 `expr $m + 128`
- chown uucp:dialer cuam$unit
- umask 77
- ;;
-
-ttym?)
- unit=`expr $i : 'tty.*\(.\)$'`
- m=`ttyminor $unit`
- mknod ttym$unit c 63 $m
- ;;
-
-# Specialix SI/XIO.
-# Note: these are 'base 1' to match the numbers on the panels, and to match
-# the manual that comes with the system.
-ttyA*)
- major=68
- nports=`expr $i : 'ttyA\(.*\)$'`
- port=1
- while [ $port -le $nports ]; do
- minor=`expr $port - 1`
- name=`expr $port + 1000 | cut -c 3-4`
- mknod ttyA$name c $major $minor
- mknod ttyiA$name c $major `expr $minor + 65536`
- mknod ttylA$name c $major `expr $minor + 131072`
- port=`expr $port + 1`
- done
- # For the user-mode control program, 'sicontrol'
- mknod si_control c 68 262144
- ;;
-
-cuaA*)
- umask 7
- major=68
- nports=`expr $i : 'cuaA\(.*\)$'`
- port=1
- while [ $port -le $nports ]; do
- minor=`expr $port - 1`
- name=`expr $port + 1000 | cut -c 3-4`
- mknod cuaA$name c $major `expr $minor + 128`
- mknod cuaiA$name c $major `expr $minor + 128 + 65536`
- mknod cualA$name c $major `expr $minor + 128 + 131072`
- chown uucp:dialer cuaA$name cuaiA$name cualA$name
- port=`expr $port + 1`
- done
- umask 77
- ;;
-
-# Digiboard PC/?? 16 port card.
-# The current scheme of minor numbering is:
-#
-# unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
-#
-# CARD bitfield in future versions may be extended to 3 bits.
-#
-# See dgb(4)
-#
-ttyD?)
- portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
- major=58
- card=`expr $i : 'tty.*\(.\)$'`
- for unit in $portlist
- do
- minor=`ttyminor $unit`
- minor=`expr $card \* 65536 + $minor`
- name=$card$unit
- mknod ttyD$name c $major $minor
- mknod ttyiD$name c $major `expr $minor + 32`
- mknod ttylD$name c $major `expr $minor + 64`
- done
- ;;
-
-cuaD?)
- umask 7
- portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
- major=58
- card=`expr $i : 'cua.*\(.\)$'`
- for unit in $portlist
- do
- minor=`ttyminor $unit`
- minor=`expr $card \* 65536 + $minor`
- name=$card$unit
- mknod cuaD$name c $major `expr $minor + 128`
- mknod cuaiD$name c $major `expr $minor + 32 + 128`
- mknod cualD$name c $major `expr $minor + 64 + 128`
- chown uucp:dialer cua*D$name
- done
- umask 77
- ;;
-
-ttyM*)
- portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
- modulelist="a b c d"
- major=101
- card=`expr $i : 'tty.*\(.\)$'`
- for unit in $modulelist
- do
- moduleminor=`ttyminor $unit`
- moduleminor=`expr $moduleminor % 10 \* 16`
- modulename=$unit
-
- for unit in $portlist
- do
- minor=`ttyminor $unit`
- minor=`expr $card \* 65536 + $minor + $moduleminor`
- name=$card$modulename$unit
- rm -f tty*M$name
- mknod ttyM$name c $major $minor
- mknod ttyiM$name c $major `expr $minor + 64`
- mknod ttylM$name c $major `expr $minor + 128`
- chown root:wheel tty*M$name
- done
- done
- ;;
-
-cuaM?)
- umask 7
- portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
- modulelist="a b c d"
- major=101
- card=`expr $i : 'cua.*\(.\)$'`
- for unit in $modulelist
- do
- moduleminor=`ttyminor $unit`
- moduleminor=`expr $moduleminor % 10 \* 16`
- modulename=$unit
-
- for unit in $portlist
- do
- minor=`ttyminor $unit`
- minor=`expr $card \* 65536 + $minor + $moduleminor`
- name=$card$modulename$unit
- rm -f cua*M$name
- mknod cuaM$name c $major `expr $minor + 262144`
- mknod cuaiM$name c $major `expr $minor + 64 + 262144`
- mknod cualM$name c $major `expr $minor + 128 + 262144`
- chown uucp:dialer cua*M$name
- done
- done
- umask 77
- ;;
-
-ttyR?)
- major=81
- BOARD=1; MINOR=65536; Rnum=0
- MINOR=`expr $BOARD \* 65536`
- dmesg | grep ^RocketPort[0-4] > /tmp/rp_list
- controllers=`awk '{print $1}' < /tmp/rp_list`
- rm -f /dev/ttyR*; rm -f /dev/ttyiR*; rm -f /dev/ttylR*
- for i in $controllers;do
- ndevices=`grep ^$i /tmp/rp_list | sed -e 's/.* \([0-9]*\) ports/\1/'`
- echo -n "Creating $ndevices devices for $i: "
- for dev in `jot $ndevices 0`;do
- mknod /dev/ttyR$Rnum c $major $MINOR
- mknod /dev/ttylR$Rnum c $major `expr $MINOR + 32`
- mknod /dev/ttyiR$Rnum c $major `expr $MINOR + 64`
- Rnum=`expr $Rnum + 1`
- MINOR=`expr $MINOR + 1`
- done
- BOARD=`expr $BOARD + 1`
- MINOR=`expr $BOARD \* 65536`
- echo " "
- done
- ;;
-
-cuaR?)
- major=81
- BOARD=1; MINOR=65536; Rnum=0
- MINOR=`expr $BOARD \* 65536`
- dmesg | grep ^RocketPort[0-4] > /tmp/rp_list
- controllers=`awk '{print $1}' < /tmp/rp_list`
- rm -f /dev/cuaR*; rm -f /dev/cuaiR*; rm -f /dev/cualR*
- for i in $controllers;do
- ndevices=`grep ^$i /tmp/rp_list | sed -e 's/.* \([0-9]*\) ports/\1/'`
- echo -n "Creating $ndevices devices for $i: "
- for dev in `jot $ndevices 0`;do
- mknod /dev/cuaR$Rnum c $major `expr $MINOR + 128`
- mknod /dev/cualR$Rnum c $major `expr $MINOR + 128 + 32`
- mknod /dev/cuaiR$Rnum c $major `expr $MINOR + 128 + 64`
- Rnum=`expr $Rnum + 1`
- MINOR=`expr $MINOR + 1`
- done
- BOARD=`expr $BOARD + 1`
- MINOR=`expr $BOARD \* 65536`
- echo " "
- done
- chown uucp:dialer /dev/cuaR*
- ;;
-
-mse*)
- unit=`expr $i : 'mse\(.*\)'`
- chr=27
- mknod mse$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11
- ;;
-
-psm*)
- unit=`expr $i : 'psm\(.*\)'`
- chr=21
- mknod psm$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11
- ;;
-
-mouse*)
- name=`expr $i : 'mouse\(.*\)'`
- if [ ! -c $name ]; then
- $0 $name # make the appropriate device
- fi
- ln -fs $name mouse
- ;;
-
-pcaudio)
- mknod pcaudio c 24 0
- mknod pcaudioctl c 24 128
- ;;
-
-socksys)
- mknod socksys c 41 0
- mknod spx c 41 1
- ln -fs socksys nfsd
- chmod 666 socksys nfsd spx
- ;;
-
-snd*)
-#
-# changes from Linux voxware
-# minor Linux FreeBSD
-# 8 sequencer2 (aka music0) music0
-# 17 patmgr0 sequencer1
-# 33 patmgr1 sequencer2
-#
-
- unit=`expr $i : 'snd\(.*\)'`
- chr=30
-
- # XXX write this less verbosely, like std
- snd_security_hole=0 # XXX
- umask $snd_security_hole
-
- ln -fs mixer$unit mixer
- ln -fs sequencer$unit sequencer
- ln -fs dsp$unit dsp
- ln -fs audio$unit audio
- ln -fs dspW$unit dspW
- ln -fs music$unit music
- ln -fs pss$unit pss
-
- mknod mixer$unit c $chr `expr $unit '*' 16 + 0`
- mknod sequencer$unit c $chr `expr $unit '*' 16 + 1`
- mknod midi$unit c $chr `expr $unit '*' 16 + 2`
- mknod dsp$unit c $chr `expr $unit '*' 16 + 3`
- mknod audio$unit c $chr `expr $unit '*' 16 + 4`
- mknod dspW$unit c $chr `expr $unit '*' 16 + 5`
- mknod sndstat c $chr 6
- # minor number 7 is unused
- mknod music$unit c $chr `expr $unit '*' 16 + 8`
- mknod pss$unit c $chr `expr $unit '*' 16 + 9`
- # minor numbers 10-15 are unused
- umask 77
- ;;
-
-vat)
- mknod vatio c 25 128
- chmod 660 vatio
- ;;
-
-gsc*)
- unit=`expr $i : 'gsc\(.*\)'`
- mknod gsc${unit} c 47 $unit
- mknod gsc${unit}p c 47 $(($unit + 8))
- mknod gsc${unit}d c 47 $(($unit + 32))
- mknod gsc${unit}pd c 47 $(($unit + 40))
- chmod 666 gsc${unit}*
- ;;
-
-apm*)
- chr=39
- mknod apm c $chr 0
- chgrp operator apm
- chmod 660 apm
- ;;
-
-card*)
- unit=`expr $i : 'card\(.*\)'`
- chr=50
- mknod card$unit c $chr $unit
- chmod 644 card$unit
- ;;
-
-ttyx?|ttyy?|ttyz?)
- case $i in
- *0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;;
- *4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;;
- *8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;;
- *c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;;
- esac
- case $i in
- ttyy?) unit=`expr $unit \+ 16`;;
- ttyz?) unit=`expr $unit \+ 32`;;
- esac
- mknod $i c 42 $unit
- chown uucp:wheel $i
- ;;
-
-cronyx)
- mknod cronyx c 42 63
- ;;
-
-joy)
- mknod joy0 c 51 0
- mknod joy1 c 51 1
- chgrp operator joy0 joy1
- chmod 640 joy0 joy1
- ;;
-
-spigot)
- mknod spigot c 11 0
- chmod 444 spigot
- ;;
-
-ctx?)
- unit=`expr $i : 'ctx\(.*\)'`
- mknod ctx$unit c 40 $unit
- chmod 444 ctx$unit
- ;;
-
-meteor?)
- unit=`expr $i : 'meteor\(.*\)'`
- mknod meteor$unit c 67 $unit
- chmod 444 meteor$unit
- ;;
-
-bktr?)
- unit=`expr $i : 'bktr\(.*\)'`
- mknod bktr$unit c 92 $unit
- mknod tuner$unit c 92 $((16 + $unit ))
- mknod vbi$unit c 92 $((32 + $unit ))
- chmod 444 bktr$unit tuner$unit vbi$unit
- ;;
-
-tun*)
- ntun=`expr $i : 'tun\(.*\)$'`
- unit=0
- while [ $unit -le $ntun ]; do
- mknod tun$unit c 52 $unit
- chown uucp:dialer tun$unit
- unit=`expr $unit + 1`
- done
- ;;
-
-sysmouse)
- mknod sysmouse c 12 128
- mknod consolectl c 12 255
- ;;
-
-snp?)
- unit=`expr $i : 'snp\(.*\)'`
- mknod snp$unit c 53 $unit
- ;;
-
-# dufault@hda.com: If I do much more work on other A-D boards
-# then eventually we'll have a "ad" and "dio" interface and some of these
-# "labpcaio" ones will be gone.
-# labpcaio: D-A and A-D.
-# labpcdio: Digital in and Digital out.
-#
-labpc*)
- umask 7
- case $i in
- labpcaio*)
- name=labpcaio
- unit=`expr $i : 'labpcaio\(.*\)'`
- all="0 1 2 3 4 5 6 7"
- offset=0
- ;;
- labpcdio*)
- name=labpcdio
- unit=`expr $i : 'labpcdio\(.*\)'`
- all="0 1 2 3"
- offset=8
- ;;
- *)
- die 3 "Don't know LabPC type $i"
- ;;
- esac
- if [ -z "${unit}" ]; then
- unit=all
- fi
- case $unit in
- 0|1|2|3|4|5|6|7)
- mknod $name$unit c 66 `expr $offset + $unit `
- ;;
- all)
- for i in $all
- do
- mknod $name$i c 66 `expr $offset + $i `
- done
- ;;
- *)
- echo "No such LabPC unit: $unit"
- ;;
- esac
- umask 77
- ;;
-
-perfmon)
- mknod perfmon c 2 32
- chgrp kmem perfmon
- chmod 640 perfmon
- ;;
-
-kbd*)
- unit=`expr $i : 'kbd\(.*\)'`
- chr=112
- mknod kbd$unit c $chr $unit
- ;;
-
-i4b)
- mknod i4b c 60 0
- chown root:wheel i4b
- chmod 600 i4b
- ;;
-
-i4bctl)
- mknod i4bctl c 55 0
- chown root:wheel i4bctl
- chmod 600 i4bctl
- ;;
-
-i4brbch*)
- unit=`expr $i : 'i4brbch\(.*\)'`
- mknod i4brbch$unit c 57 $unit
- chown root:wheel i4brbch$unit
- chmod 600 i4brbch$unit
- ;;
-
-i4bteld*)
- offset=64
- unit=`expr $i : 'i4bteld\(.*\)'`
- mknod i4bteld$unit c 56 `expr $offset + $unit `
- chown root:wheel i4bteld$unit
- chmod 600 i4bteld$unit
- ;;
-
-i4btel*)
- unit=`expr $i : 'i4btel\(.*\)'`
- mknod i4btel$unit c 56 $unit
- chown root:wheel i4btel$unit
- chmod 600 i4btel$unit
- ;;
-
-i4btrc*)
- unit=`expr $i : 'i4btrc\(.*\)'`
- mknod i4btrc$unit c 59 $unit
- chown root:wheel i4btrc$unit
- chmod 600 i4btrc$unit
- ;;
-
-local)
- umask 0 # XXX should be elsewhere
- sh MAKEDEV.local
- umask 77
- ;;
-
-*)
- echo $i - no such device name
- ;;
-
-esac
-done
diff --git a/etc/etc.i386/MAKEDEV b/etc/etc.i386/MAKEDEV
deleted file mode 100644
index 5e26cc1..0000000
--- a/etc/etc.i386/MAKEDEV
+++ /dev/null
@@ -1,1442 +0,0 @@
-#!/bin/sh -
-#
-# Copyright (c) 1990 The Regents of the University of California.
-# All rights reserved.
-#
-# Written and contributed by W. Jolitz 12/90
-#
-# Redistribution and use in source and binary forms are permitted provided
-# that: (1) source distributions retain this entire copyright notice and
-# comment, and (2) distributions including binaries display the following
-# acknowledgement: ``This product includes software developed by the
-# University of California, Berkeley and its contributors'' in the
-# documentation or other materials provided with the distribution and in
-# all advertising materials mentioning features or use of this software.
-# Neither the name of the University nor the names of its contributors may
-# be used to endorse or promote products derived from this software without
-# specific prior written permission.
-# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-#
-# @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
-#
-# Device "make" file. Valid arguments:
-# all makes all known devices, standard number of units (or close)
-# std standard devices
-# jail suitable for a jail(8)
-# local configuration specific devices
-# mach-4 mach4&lites+devices for Mach's XFree86 distribution
-# (see http://www.cs.hut.fi/lites.html for more info on LITES)
-#
-# Tapes:
-# wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
-# sa* SCSI Sequential Access Devices
-# ft* QIC-40/QIC-80 3M cartridge tape (interfaced
-# via the floppy disk controller)
-#
-# Disks:
-# acd* ATAPI CD-ROM disks
-# amrd* AMI MegaRAID
-# cd* SCSI CD-ROM disks
-# da* SCSI Direct Access Devices
-# fd* floppy disk drives (3 1/2", 5 1/4")
-# fla* M-Systems DiskOnChip
-# ida* Compaq Smart-2 RAID
-# matcd* Matsushita (Panasonic) CD-ROM disks
-# mcd* Mitsumi CD-ROM disks
-# md* Memory (or malloc) disk
-# mlxd* Mylex DAC960 RAID
-# scd* Sony CD-ROM disks
-# sd* SCSI disk, antiquated, use da* instead
-# vn* vnode disks
-# wd* "Winchester" disk drives (ST506,IDE,ESDI,RLL,...)
-# wfd* IDE floppy disk drives (LS-120)
-#
-# Console ports:
-# vty* virtual console devices for syscons/pcvt/codrv
-#
-# Pointing devices:
-# mse* Logitech and ATI Inport bus mouse
-# psm* PS/2 mouse
-# sysmouse Mousesystems mouse emulator for syscons
-#
-# Time devices:
-# refclock-* serial ports used by xntpd parse refclocks
-#
-# Terminal ports:
-# tty* general purpose serial ports
-# cua* dialout serial ports
-# ttyA* Specialix SI/XIO dialin ports ('*' = number of devices)
-# cuaA* Specialix SI/XIO dialout ports
-# ttyD* Digiboard - 16 dialin ports
-# cuaD* Digiboard - 16 dialout ports
-# ttyR* Rocketport dialin ports
-# cuaR* Rocketport dialout ports
-#
-# Pseudo terminals:
-# pty* set of 32 master and slave pseudo terminals
-# vty* virtual terminals using syscons/pcvt/codrv console
-#
-# Parallel port:
-# lpt* Printer
-# ppi* Parallel port i/o
-# pps* Pulse per second timing interface
-#
-# I2C and SMBus:
-# iic* I2C devices
-# smb* SMBUS devices
-#
-# USB devices:
-# usb* USB bus control device
-# ums* mouse
-# ulpt* printer
-# ugen* generic USB device
-#
-# SCSI devices (other than CD-ROM, tape and disk):
-# ch* SCSI Media-Changer (juke box) driver
-# ssc The ``super scsi'' device
-# worm* WORM driver
-# pt* Processor Type (HP scanner, as one example)
-# pass* CAM Passthrough device
-#
-# PC-CARD (previously called PCMCIA) support
-# card* PC-CARD slots
-#
-# ISDN devices:
-# i4b isdnd call control device
-# i4bctl debugging control device
-# i4btrc* trace data interface(s), one per passive card
-# i4btel* telephony interface(s)
-# i4bteld* telephony dialout interface(s)
-# i4brbch* raw b channel access device(s)
-#
-# Special purpose devices:
-# apm Advanced Power Management BIOS
-# apmctl APM BIOS control device
-# bpf* packet filter
-# speaker pc speaker
-# tw* xten power controller
-# snd* various sound cards
-# pcaudio PCM audio driver
-# socksys iBCS2 socket system driver
-# vat VAT compatibility audio driver (requires snd*)
-# gsc Genius GS-4500 hand scanner
-# joy pc joystick
-# tun* Tunneling IP device
-# snp* tty snoop devices
-# spigot Video Spigot video acquisition card
-# ctx* Cortex-I video acquisition card
-# meteor* Matrox Meteor video acquisition card (pci)
-# bktr* Bt848 based video acquisition card (pci)
-# labpc* National Instrument's Lab-PC and LAB-PC+
-# perfmon CPU performance-monitoring counters
-# pci PCI configuration-space access from user mode
-# kbd keyboard devices
-#
-# $FreeBSD$
-#
-
-PATH=/sbin:/bin/:/usr/bin:/usr/sbin:$PATH
-umask 77
-
-# Usage: die exitcode msg
-die() {
- echo $2
- exit $1
-}
-
-# Convert integer to partition name
-dkitop() {
- local p
-
- case $1 in
- 0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
- *) p="?";;
- esac
- echo $p
-}
-
-# Convert integer to slice name
-dkitos() {
- local s
-
- case $1 in
- 0) s="";;
- 1) s="";;
- *) s=s$(($1-1));;
- esac
- echo $s
-}
-
-# Convert disk (type, unit, slice, partition) to minor number
-dkminor()
-{
- echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4))
-}
-
-# Override mknod(2) to add extra handling to it.
-mknod() {
- rm -f "$1" || exit 1
- /sbin/mknod "$@" || die 2 "/sbin/mknod $@ failed"
- chown root:wheel "$1" || exit 1
-}
-
-# Convert tape (ctrl, unit, mode, access) to minor number
-saminor()
-{
- echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
-}
-
-# Convert the last character of a tty name to a minor number.
-ttyminor()
-{
- case $unit in
- [0-9]) m=$unit;;
- a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
- h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
- o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
- v) m=31;;
- *) m="?";;
- esac
- echo $m
-}
-
-# Raw partition for disks
-dkrawpart=2
-
-# Compatibility slice for disks
-dkcompatslice=0
-
-# Raw slice for disks
-dkrawslice=1
-
-# Standard umasks
-disk_umask=037 # allow group operator to read disks
-tape_umask=017 # allow group operator to read/write tapes
-
-for i in $*; do
-case $i in
-
-all)
- sh MAKEDEV std # standard
- sh MAKEDEV fd0 fd1 # bdev, floppy disk
- sh MAKEDEV da0 da1 da2 da3 # bdev, SCSI disk
- sh MAKEDEV ad0 ad1 ad2 ad3 # bdev, ATA disk
- sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
- sh MAKEDEV wd0 wd1 wd2 wd3 # bdev, OLD disk
- sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
- sh MAKEDEV vn0 # bdev, virtual disk
- sh MAKEDEV cd0 matcd0 mcd0 scd0 # bdev, cdrom
- sh MAKEDEV ft0 sa0 wt0 # bdev, tape
- sh MAKEDEV vty12 # cdev, virtual tty
- sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty
- sh MAKEDEV pty0 # cdev, pseudo tty
- sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty
- sh MAKEDEV kbd0 # cdev, keyboard
- sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse
- sh MAKEDEV pcaudio speaker # cdev, noise
- sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer
- sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port
- sh MAKEDEV iic0 iic1 # cdev, I2C device
- sh MAKEDEV smb0 smb1 # cdev, SMBus device
- sh MAKEDEV usb usb0 ums0 ulpt0 ugen0 # cdev, USB devices
- sh MAKEDEV bpf0 tun0 # cdev, network
- sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous
- sh MAKEDEV apm apmctl card0 card1 card2 card3 # cdev, laptop
- sh MAKEDEV pass4 xpt2 # cdev, CAM
- sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
- sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN
- sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN
- ;;
-
-std)
- mknod console c 0 0; chmod 600 console
- mknod drum c 4 0; chmod 640 drum; chgrp kmem drum
- mknod kmem c 2 1; chmod 640 kmem; chgrp kmem kmem
- mknod mem c 2 0; chmod 640 mem; chgrp kmem mem
- mknod null c 2 2; chmod 666 null
- mknod random c 2 3; chmod 644 random
- mknod urandom c 2 4; chmod 644 urandom
- mknod zero c 2 12; chmod 666 zero
- mknod io c 2 14; chmod 600 io
- mknod tty c 1 0; chmod 666 tty
- mknod klog c 7 0; chmod 600 klog
- mknod stdin c 22 0; chmod 666 stdin
- mknod stdout c 22 1; chmod 666 stdout
- mknod stderr c 22 2; chmod 666 stderr
- mknod pci c 78 0; chmod 644 pci
- mkdir -p fd
- (cd fd && eval `echo "" | awk ' BEGIN { \
- for (i = 0; i < 64; i++) \
- printf("mknod %d c 22 %d;", i, i)}'`)
- chown -R root:wheel fd
- chmod 555 fd
- chmod 666 fd/*
- ;;
-
-jail)
- sh MAKEDEV std pty0
- rm mem kmem drum pci io klog # for security
- ln -sf null mem # for libkvm (ab)users
- ln -sf null kmem # --//--
- ln -sf null drum # --//--
- ;;
-
-mach-4)
- mknod iopl c 22 0
- mknod kbd c 23 0
- mknod mouse c 24 0
- mknod time c 25 0
- mknod timezone c 26 0
- ;;
-
-# Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
-wt*)
- umask $tape_umask
- u=`expr $i : '..\(.*\)'`
- if [ -z "${u}" ]; then u=0; fi
- mknod rwt${u} c 10 `expr 0 + $u` # default density, 512b blocks
- mknod nrwt${u} c 10 `expr 4 + $u`
-# mknod rWt${u} c 10 `expr 64 + $u` # default density, 1024b blocks
-# mknod nrWt${u} c 10 `expr 68 + $u`
- mknod rwt${u}b c 10 `expr 16 + $u` # 60 megabytes
- mknod nrwt${u}b c 10 `expr 20 + $u`
- mknod rwt${u}c c 10 `expr 24 + $u` # 120 megabytes
- mknod nrwt${u}c c 10 `expr 28 + $u`
- mknod rwt${u}d c 10 `expr 32 + $u` # 150 megabytes
- mknod nrwt${u}d c 10 `expr 36 + $u`
-# mknod rwt${u}e c 10 `expr 40 + $u` # 300 megabytes?
-# mknod nrwt${u}e c 10 `expr 44 + $u`
-# mknod rwt${u}f c 10 `expr 48 + $u` # 600 megabytes?
-# mknod nrwt${u}f c 10 `expr 52 + $u`
- chgrp operator r[Ww]t$u nr[Ww]t$u r[Ww]t$u[a-f] nr[Ww]t$u[a-f]
- umask 77
- ;;
-
-# Individual slices.
-ad*s*|afd*s*|amrd*s*|da*s*|fla*s*|ida*s*|md*s*|mlxd*s*|sd*s*|vn*s*|wd*s*|wfd*s*)
- umask $disk_umask
- case $i in
- ad*s*) name=ad; blk=30; chr=116;;
- afd*s*) name=afd; blk=32; chr=118;;
- amrd*s*) name=amrd; blk=35; chr=133;;
- da*s*) name=da; blk=4; chr=13;;
- fla*s*) name=fla; blk=28; chr=102;;
- ida*s*) name=ida; blk=29; chr=109;;
- md*s*) name=md; blk=22; chr=95;;
- mlxd*s*) name=mlxd; blk=27; chr=131;;
- sd*s*) name=sd; blk=4; chr=13;;
- vn*s*) name=vn; blk=15; chr=43;;
- wd*s*) name=wd; blk=0; chr=3;;
- wfd*s*) name=wfd; blk=1; chr=87;;
- esac
- case $i in
- amrd*s*|mlxd*s*)
- unit=`expr $i : '....\([0-9]*\)s'`
- slice=`expr $i : '....[0-9]*s\([0-9]*\)'`
- part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'`
- ;;
- afd*s*|fla*s*|ida*s*|wfd*s*)
- unit=`expr $i : '...\([0-9]*\)s'`
- slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
- part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
- ;;
- *)
- unit=`expr $i : '..\([0-9]*\)s'`
- slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
- part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
- ;;
- esac
- case $unit in
- [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
- case $slice in
- [0-9]|[1-2][0-9]|30)
- oldslice=$slice
- slice=$(($slice+1))
- slicename=`dkitos $slice`
- minor=`dkminor 0 $unit $slice $dkrawpart`
- mknod $name$unit$slicename b $blk $minor
- mknod r$name$unit$slicename c $chr $minor
- case $part in
- [a-h])
- case $oldslice in
- 0) slice=$oldslice ;;
- esac
- for part in 0 1 2 3 4 5 6 7
- do
- minor=`dkminor 0 $unit $slice $part`
- partname=`dkitop $part`
- mknod $name$unit$slicename$partname \
- b $blk $minor
- mknod r$name$unit$slicename$partname \
- c $chr $minor
- done
- ;;
- "")
- ;;
- *)
- echo bad partition for disk in: $i
- ;;
- esac
- chgrp operator $name$unit$slicename* \
- r$name$unit$slicename*
- ;;
- *)
- echo bad slice for disk in: $i
- ;;
- esac
- ;;
- *)
- echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
- ;;
- esac
- umask 77
- ;;
-
-fd*)
- umask $disk_umask
- unit=`expr $i : '..\(.*\)'`
- name=fd; blk=2; chr=9
- case $unit in
- 0|1|2|3)
- mknod ${name}${unit} b $blk `expr $unit '*' 64`
- mknod r${name}${unit} c $chr `expr $unit '*' 64`
- # Fake BSD partitions
- for i in a b c d e f g h
- do
- ln -f ${name}${unit} ${name}${unit}$i
- ln -f r${name}${unit} r${name}${unit}$i
- done
- # User-readable and programmer-readable name sets
-
- mknod ${name}${unit}.1720 b $blk `expr $unit '*' 64 + 1`
- mknod r${name}${unit}.1720 c $chr `expr $unit '*' 64 + 1`
- # ln -f ${name}${unit}.1720 ${name}${unit}135hs21
- # ln -f r${name}${unit}.1720 r${name}${unit}135hs21
-
- mknod ${name}${unit}.1480 b $blk `expr $unit '*' 64 + 2`
- mknod r${name}${unit}.1480 c $chr `expr $unit '*' 64 + 2`
- # ln -f ${name}${unit}.1480 ${name}${unit}135hs18
- # ln -f r${name}${unit}.1480 r${name}${unit}135hs18
- # ln -f ${name}${unit}.1480 ${name}${unit}96hs18
- # ln -f r${name}${unit}.1480 r${name}${unit}96hs18
-
- mknod ${name}${unit}.1440 b $blk `expr $unit '*' 64 + 3`
- mknod r${name}${unit}.1440 c $chr `expr $unit '*' 64 + 3`
- # ln -f ${name}${unit}.1440 ${name}${unit}135
- # ln -f r${name}${unit}.1440 r${name}${unit}135
- # ln -f ${name}${unit}.1440 ${name}${unit}135ds18
- # ln -f r${name}${unit}.1440 r${name}${unit}135ds18
- # ln -f ${name}${unit}.1440 ${name}${unit}96ds18
- # ln -f r${name}${unit}.1440 r${name}${unit}96ds18
-
- mknod ${name}${unit}.1200 b $blk `expr $unit '*' 64 + 4`
- mknod r${name}${unit}.1200 c $chr `expr $unit '*' 64 + 4`
- # ln -f ${name}${unit}.1200 ${name}${unit}96
- # ln -f r${name}${unit}.1200 r${name}${unit}96
- # ln -f ${name}${unit}.1200 ${name}${unit}96ds15
- # ln -f r${name}${unit}.1200 r${name}${unit}96ds15
- # ln -f ${name}${unit}.1200 ${name}${unit}135ds15
- # ln -f r${name}${unit}.1200 r${name}${unit}135ds15
-
- mknod ${name}${unit}.820 b $blk `expr $unit '*' 64 + 5`
- mknod r${name}${unit}.820 c $chr `expr $unit '*' 64 + 5`
- # ln -f ${name}${unit}.820 ${name}${unit}96hs10
- # ln -f r${name}${unit}.820 r${name}${unit}96hs10
- # ln -f ${name}${unit}.820 ${name}${unit}135hs10
- # ln -f r${name}${unit}.820 r${name}${unit}135hs10
-
- mknod ${name}${unit}.800 b $blk `expr $unit '*' 64 + 6`
- mknod r${name}${unit}.800 c $chr `expr $unit '*' 64 + 6`
- # ln -f ${name}${unit}.800 ${name}${unit}96ds10
- # ln -f r${name}${unit}.800 r${name}${unit}96ds10
- # ln -f ${name}${unit}.800 ${name}${unit}135ds10
- # ln -f r${name}${unit}.800 r${name}${unit}135ds10
-
- mknod ${name}${unit}.720 b $blk `expr $unit '*' 64 + 7`
- mknod r${name}${unit}.720 c $chr `expr $unit '*' 64 + 7`
- # ln -f ${name}${unit}.720 ${name}${unit}96ds9
- # ln -f r${name}${unit}.720 r${name}${unit}96ds9
- # ln -f ${name}${unit}.720 ${name}${unit}135ds9
- # ln -f r${name}${unit}.720 r${name}${unit}135ds9
-
- mknod ${name}${unit}.360 b $blk `expr $unit '*' 64 + 8`
- mknod r${name}${unit}.360 c $chr `expr $unit '*' 64 + 8`
- # ln -f ${name}${unit}.360 ${name}${unit}48
- # ln -f r${name}${unit}.360 r${name}${unit}48
- # ln -f ${name}${unit}.360 ${name}${unit}48ds9
- # ln -f r${name}${unit}.360 r${name}${unit}48ds9
-
- chgrp operator ${name}${unit}* r${name}${unit}*
- ;;
- *)
- echo bad unit for disk in: $i
- ;;
- esac
- umask 77
- ;;
-
-ft*)
- umask $tape_umask
- unit=`expr $i : '..\(.*\)'`
- name=ft; blk=2; chr=9
- case $unit in
- 0|1|2|3)
- mknod ${name}${unit} b $blk `expr $unit '*' 64 + 32`
- mknod r${name}${unit} c $chr `expr $unit '*' 64 + 32`
- ln -f ${name}${unit} ${name}${unit}a
- ln -f r${name}${unit} r${name}${unit}a
- chgrp operator ${name}${unit}* r${name}${unit}*
- ;;
- *)
- echo bad unit for tape in: $i
- ;;
- esac
- umask 77
- ;;
-
-ad*|afd*|amrd*|da*|fla*|ida*|md*|mlxd*|od*|sd*|vn*|wd*|wfd*)
- umask $disk_umask
- case $i in
- ad*) name=ad; blk=30; chr=116;;
- afd*) name=afd; blk=32; chr=118;;
- amrd*) name=amrd; blk=35; chr=133;;
- da*) name=da; blk=4; chr=13;;
- fla*) name=fla; blk=28; chr=102;;
- ida*) name=ida; blk=29; chr=109;;
- md*) name=md; blk=22; chr=95;;
- mlxd*) name=mlxd; blk=27; chr=131;;
- od*) name=od; blk=4; chr=13;;
- sd*) name=sd; blk=4; chr=13;;
- vn*) name=vn; blk=15; chr=43;;
- wd*) name=wd; blk=0; chr=3;;
- wfd*) name=wfd; blk=1; chr=87;;
- esac
- case $i in
- amrd*|mlxd*)
- unit=`expr $i : '....\(.*\)'`
- ;;
- afd*|fla*|ida*|wfd*)
- unit=`expr $i : '...\(.*\)'`
- ;;
- *)
- unit=`expr $i : '..\(.*\)'`
- ;;
- esac
- case $unit in
- [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
- for slicepartname in s0h s1 s2 s3 s4
- do
- sh MAKEDEV $name$unit$slicepartname
- done
- ;;
- *)
- echo bad unit for disk in: $i
- ;;
- esac
- umask 77
- ;;
-
-ccd*)
- umask $disk_umask
- name=ccd
- blk=21; chr=74
- unit=`expr $i : '...\(.*\)'`
- case $unit in
- [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
- for part in 0 1 2 3 4 5 6 7
- do
- minor=`dkminor 0 $unit 0 $part`
- partname=`dkitop $part`
- mknod $name$unit$partname b $blk $minor
- mknod r$name$unit$partname c $chr $minor
- done
- chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h]
- ;;
- *)
- echo bad unit for disk in: $i
- ;;
- esac
- umask 77
- ;;
-
-ssc*)
- mknod ssc c 49 0
- ;;
-
-# SCSI processor type driver
-pt[0-9]*)
- chr=61
- name=pt
- unit=`expr $i : 'pt\([0-9][0-9]*\)'`
- if [ -z "${unit}" ]; then
- unit=0
- fi
- unit=`expr $unit + 1 - 1`
- mknod ${name}${unit} c $chr $unit
- ;;
-
-# SCSI target mode sample driver
-targ[0-9]*)
- chr=65
- name=targ
- unit=`expr $i : 'targ\([0-9][0-9]*\)'`
- if [ -z "${unit}" ]; then
- unit=0
- fi
- unit=`expr $unit + 1 - 1`
- mknod ${name}${unit} c $chr $unit
- mknod ${name}.ctl c $chr 0xffff00ff
- ;;
-
-# CAM transport layer device
-xpt*)
- umask 077
- # This major number is temporary
- chr=104
- name=xpt
- units=`expr $i : 'xpt\(.*\)'`
- if [ -z "${units}" ]; then
- units=1
- fi
- eval `echo ${chr} ${units} ${name} |awk \
- '{ c=$1; n=$2; name=$3;} END {
- for (i = 0; i < n; i++)
- printf("rm -f %s%d r%s%d; mknod %s%d c %d %d; \
- chgrp operator %s%d;", \
- name, i, name, i, name, i, c, i, \
- name, i); }'`
- ;;
-# CAM passthrough device
-pass*|uk*)
- umask 077
- # This major number is temporary
- chr=31
- name=pass
- units=`expr $i : 'pass\(.*\)'`
- if [ -z "${units}" ]; then
- units=1
- fi
- eval `echo ${chr} ${units} ${name} |awk \
- '{ c=$1; n=$2; name=$3;} END {
- for (i = 0; i < n; i++)
- printf("rm -f %s%d r%s%d; mknod %s%d c %d %d; \
- chgrp operator %s%d;", \
- name, i, name, i, name, i, c, i, \
- name, i); }'`
- ;;
-pty*)
- class=`expr $i : 'pty\(.*\)'`
- case $class in
- 0) offset=0 name=p;;
- 1) offset=32 name=q;;
- 2) offset=64 name=r;;
- 3) offset=96 name=s;;
-# Note that xterm (at least) only look at p-s.
- 4) offset=128 name=P;;
- 5) offset=160 name=Q;;
- 6) offset=192 name=R;;
- 7) offset=224 name=S;;
- # This still leaves [tuTU].
- *) echo bad unit for pty in: $i;;
- esac
- case $class in
- 0|1|2|3|4|5|6|7)
- umask 0
- eval `echo $offset $name | awk ' { b=0+$1; n=$2 } END { \
- for (i = 0; i < 32; i++) {
- c = substr("0123456789abcdefghijklmnopqrstuv", i + 1, 1); \
- printf("mknod tty%s%s c 5 %d; \
- mknod pty%s%s c 6 %d;", \
- n, c, b+i, \
- n, c, b+i); \
- } \
- }'`
- umask 77
- ;;
- esac
- ;;
-
-sa*)
- umask $tape_umask
- unit=`expr $i : '..\(.*\)'`
- chr=14
-
- case $unit in
- [0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
- mknod rsa${unit}.ctl c $chr `saminor 1 ${unit} 0 0`
- for m in 0 1 2 3
- do
- mknod rsa${unit}.${m} c $chr `saminor 0 ${unit} ${m} 0`
- mknod nrsa${unit}.${m} c $chr `saminor 0 ${unit} ${m} 1`
- mknod ersa${unit}.${m} c $chr `saminor 0 ${unit} ${m} 2`
- chgrp operator rsa${unit}.${m} nrsa${unit}.${m} \
- ersa${unit}.${m}
- done
- ln -f rsa${unit}.0 rsa${unit}
- ln -f nrsa${unit}.0 nrsa${unit}
- ln -f ersa${unit}.0 ersa${unit}
- ;;
- *)
- echo bad unit for tape in: $i
- ;;
- esac
- umask 77
- ;;
-
-ch*)
- umask 37
- unit=`expr $i : '..\(.*\)'`
- case $i in
- ch*) name=ch; chr=17;;
- esac
- case $unit in
- 0|1|2|3|4|5|6)
- mknod ${name}${unit} c $chr $unit
- chgrp operator ${name}${unit}
- ;;
- *)
- echo bad unit for media changer in: $i
- ;;
- esac
- umask 77
- ;;
-
-ast*)
- umask 2 ;
- unit=`expr $i : '...\(.*\)'`
- chr=119
- case $unit in
- 0|1|2|3)
- mknod rast${unit} c $chr `expr $unit '*' 8 + 0`
- chgrp operator rast${unit}
- chmod 640 rast${unit}
- mknod nrast${unit} c $chr `expr $unit '*' 8 + 1`
- chgrp operator nrast${unit}
- chmod 640 nrast${unit}
- ;;
- *)
- echo bad unit for tape in: $i
- ;;
- esac
- umask 77
- ;;
-
-acd*|cd*|mcd*|scd*)
- umask $disk_umask
- case $i in
- acd*) units=`expr $i : '...\(.*\)'`; name=acd; blk=31; chr=117;;
- cd*) units=`expr $i : '..\(.*\)'`; name=cd; blk=6; chr=15;;
- mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; blk=7; chr=29;;
- scd*) units=`expr $i : '...\(.*\)'`; name=scd; blk=16; chr=45;;
- esac
- if [ -z "${units}" -o "${units}" -le 0 ]; then
- units=1
- fi
- if [ "${units}" -le 31 ]; then
- eval `echo ${chr} ${blk} ${units} ${name} |awk \
- '{ c=$1; b=$2; n=$3; name=$4;} END{
- for (i = 0; i < n; i++){
- printf("rm -f %s%d* r%s%d*; \
- mknod %s%da b %d %d; \
- mknod %s%dc b %d %d; \
- mknod r%s%da c %d %d; \
- mknod r%s%dc c %d %d; \
- chgrp operator %s%d* r%s%d*;",
- name, i, name, i,
- name, i, b, (i * 8),
- name, i, b, (i * 8) + 2,
- name, i, c, (i * 8),
- name, i, c, (i * 8) + 2,
- name, i, name, i); }}'`
- else
- echo "$i is invalid -- can't have more than 32 cd devices"
- fi
- umask 77
- ;;
-
-matcd*)
- umask 2
- case $i in
- matcd*) unit=`expr $i : '.....\(.*\)'`; name=matcd; blk=17; chr=46;;
- esac
- case $unit in
- 0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15)
- mknod ${name}${unit}a b $blk `expr $unit '*' 8 + 0`
- mknod ${name}${unit}c b $blk `expr $unit '*' 8 + 2`
- mknod r${name}${unit}a c $chr `expr $unit '*' 8 + 0`
- mknod r${name}${unit}c c $chr `expr $unit '*' 8 + 2`
- chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h]
- chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h]
-
- mknod ${name}${unit}la b $blk `expr $unit '*' 8 + 128`
- mknod ${name}${unit}lc b $blk `expr $unit '*' 8 + 130`
- mknod r${name}${unit}la c $chr `expr $unit '*' 8 + 128`
- mknod r${name}${unit}lc c $chr `expr $unit '*' 8 + 130`
- chgrp operator ${name}${unit}l[a-h] r${name}${unit}l[a-h]
- chmod 640 ${name}${unit}l[a-h] r${name}${unit}l[a-h]
- ;;
- *)
- echo bad unit for disk in: $i
- ;;
- esac
- umask 77
- ;;
-
-wcd*)
- umask 2 ;
- unit=`expr $i : '...\(.*\)'`
- blk=19
- chr=69
- case $unit in
- 0|1|2|3|4|5|6|7)
- mknod wcd${unit}a b $blk `expr $unit '*' 8 + 0`
- mknod rwcd${unit}a c $chr `expr $unit '*' 8 + 0`
- mknod wcd${unit}c b $blk `expr $unit '*' 8 + 2`
- mknod rwcd${unit}c c $chr `expr $unit '*' 8 + 2`
- chgrp operator wcd${unit}[a-h] rwcd${unit}[a-h]
- chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h]
- ;;
- *)
- echo bad unit for disk in: $i
- ;;
- esac
- umask 77
- ;;
-
-wst*)
- umask 2 ;
- unit=`expr $i : '...\(.*\)'`
- chr=90
- case $unit in
- 0|1|2|3)
- mknod rwst${unit} c $chr `expr $unit '*' 8 + 0`
- chgrp operator rwst${unit}
- chmod 640 rwst${unit}
- ;;
- esac
- umask 77
- ;;
-
-iic*)
- unit=`expr $i : 'iic\(.*\)'`
- mknod iic$unit c 105 $unit
- ;;
-
-smb*)
- unit=`expr $i : 'smb\(.*\)'`
- mknod smb$unit c 106 $unit
- ;;
-
-ppi*)
- unit=`expr $i : 'ppi\(.*\)'`
- mknod ppi$unit c 82 $unit
- ;;
-
-pps*)
- unit=`expr $i : 'pps\(.*\)'`
- mknod pps$unit c 89 $unit
- ;;
-
-usb)
- mknod usb$unit c 108 255
- ;;
-
-usb*)
- unit=`expr $i : 'usb\(.*\)'`
- mknod usb$unit c 108 $unit
- ;;
-
-ums*)
- unit=`expr $i : 'ums\(.*\)'`
- mknod ums$unit c 111 $unit
- ;;
-
-ulpt*)
- unit=`expr $i : 'ulpt\(.*\)'`
- mknod ulpt$unit c 113 $unit
- ;;
-
-ugen*)
- unit=`expr $i : 'ugen\([0-9][0-9]*\)'`
- endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
- if [ -z "${unit}" ]; then
- echo $i - Invalid unit number
- fi
- if [ -z "${endpoint}" ]; then
- minor=`expr $unit \* 16`
- mknod ugen$unit c 114 $minor
- else
- minor=`expr $unit \* 16 + $endpoint`
- mknod ugen$unit.$endpoint c 114 $minor
- fi
- ;;
-
-lpt*)
- unit=`expr $i : 'lpt\(.*\)'`
- mknod lpt$unit c 16 $unit
- mknod lpctl$unit c 16 `expr $unit + 128`
- ;;
-
-tw*)
- unit=`expr $i : 'tw\(.*\)'`
- mknod tw$unit c 19 $unit
- chgrp operator tw$unit
- ;;
-
-# Use this to create virtual consoles for syscons, pcvt or codrv
-# ttyv0-b
-# use as MAKEDEV vtyNN to create NN entries
-vty*)
- chr=12
- units=`expr $i : 'vty\(.*\)'`
- eval `echo ${chr} ${units} | awk ' { c=0+$1; n=0+$2 } END {
- for (i = 0; i < n; i++)
- printf("mknod ttyv%01x c %d %d;", i, c, i); }'`
- ln -fs ttyv0 vga # XXX X still needs this pccons relic
- ;;
-
-bpf*)
- nbpf=`expr $i : 'bpf\(.*\)$'`
- unit=0
- while [ $unit -le $nbpf ]; do
- mknod bpf$unit c 23 $unit
- unit=`expr $unit + 1`
- done
- ;;
-
-speaker)
- mknod speaker c 26 0
- ;;
-
-cuaa?|cua?)
- umask 7
- unit=`expr $i : 'cua.*\(.\)$'`
- m=`ttyminor $unit`
- mknod cuaa$unit c 28 `expr $m + 128`
- mknod cuaia$unit c 28 `expr $m + 32 + 128`
- mknod cuala$unit c 28 `expr $m + 64 + 128`
- chown uucp:dialer cua*a$unit
- umask 77
- ;;
-
-tty0?|ttyd?|tty?)
- unit=`expr $i : 'tty.*\(.\)$'`
- m=`ttyminor $unit`
- mknod ttyd$unit c 28 $m
- mknod ttyid$unit c 28 `expr $m + 32`
- mknod ttyld$unit c 28 `expr $m + 64`
- ;;
-
-cuac?)
- umask 7
- portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
- g h i j k l m n o p q r s t u v"
- major=48
- card=`expr $i : 'cua.*\(.\)$'`
- for unit in $portlist
- do
- minor=`ttyminor $unit`
- minor=`expr $card \* 65536 + $minor`
- name=$card$unit
- mknod cuac$name c $major `expr $minor + 128`
- mknod cuaic$name c $major `expr $minor + 32 + 128`
- mknod cualc$name c $major `expr $minor + 64 + 128`
- chown uucp:dialer cuac$name cuaic$name cualc$name
- done
- umask 77
- ;;
-
-ttyc?)
- portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
- g h i j k l m n o p q r s t u v"
- major=48
- card=`expr $i : 'tty.*\(.\)$'`
- for unit in $portlist
- do
- minor=`ttyminor $unit`
- minor=`expr $card \* 65536 + $minor`
- name=$card$unit
- mknod ttyc$name c $major $minor
- mknod ttyic$name c $major `expr $minor + 32`
- mknod ttylc$name c $major `expr $minor + 64`
- done
- ;;
-
-# RISCom8 'rc' driver entries
-
-cuam?)
- umask 7
- unit=`expr $i : 'cua.*\(.\)$'`
- m=`ttyminor $unit`
- mknod cuam$unit c 63 `expr $m + 128`
- chown uucp:dialer cuam$unit
- umask 77
- ;;
-
-ttym?)
- unit=`expr $i : 'tty.*\(.\)$'`
- m=`ttyminor $unit`
- mknod ttym$unit c 63 $m
- ;;
-
-# Specialix SI/XIO.
-# Note: these are 'base 1' to match the numbers on the panels, and to match
-# the manual that comes with the system.
-ttyA*)
- major=68
- nports=`expr $i : 'ttyA\(.*\)$'`
- port=1
- while [ $port -le $nports ]; do
- minor=`expr $port - 1`
- name=`expr $port + 1000 | cut -c 3-4`
- mknod ttyA$name c $major $minor
- mknod ttyiA$name c $major `expr $minor + 65536`
- mknod ttylA$name c $major `expr $minor + 131072`
- port=`expr $port + 1`
- done
- # For the user-mode control program, 'sicontrol'
- mknod si_control c 68 262144
- ;;
-
-cuaA*)
- umask 7
- major=68
- nports=`expr $i : 'cuaA\(.*\)$'`
- port=1
- while [ $port -le $nports ]; do
- minor=`expr $port - 1`
- name=`expr $port + 1000 | cut -c 3-4`
- mknod cuaA$name c $major `expr $minor + 128`
- mknod cuaiA$name c $major `expr $minor + 128 + 65536`
- mknod cualA$name c $major `expr $minor + 128 + 131072`
- chown uucp:dialer cuaA$name cuaiA$name cualA$name
- port=`expr $port + 1`
- done
- umask 77
- ;;
-
-# Digiboard PC/?? 16 port card.
-# The current scheme of minor numbering is:
-#
-# unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
-#
-# CARD bitfield in future versions may be extended to 3 bits.
-#
-# See dgb(4)
-#
-ttyD?)
- portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
- major=58
- card=`expr $i : 'tty.*\(.\)$'`
- for unit in $portlist
- do
- minor=`ttyminor $unit`
- minor=`expr $card \* 65536 + $minor`
- name=$card$unit
- mknod ttyD$name c $major $minor
- mknod ttyiD$name c $major `expr $minor + 32`
- mknod ttylD$name c $major `expr $minor + 64`
- done
- ;;
-
-cuaD?)
- umask 7
- portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
- major=58
- card=`expr $i : 'cua.*\(.\)$'`
- for unit in $portlist
- do
- minor=`ttyminor $unit`
- minor=`expr $card \* 65536 + $minor`
- name=$card$unit
- mknod cuaD$name c $major `expr $minor + 128`
- mknod cuaiD$name c $major `expr $minor + 32 + 128`
- mknod cualD$name c $major `expr $minor + 64 + 128`
- chown uucp:dialer cua*D$name
- done
- umask 77
- ;;
-
-ttyM*)
- portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
- modulelist="a b c d"
- major=101
- card=`expr $i : 'tty.*\(.\)$'`
- for unit in $modulelist
- do
- moduleminor=`ttyminor $unit`
- moduleminor=`expr $moduleminor % 10 \* 16`
- modulename=$unit
-
- for unit in $portlist
- do
- minor=`ttyminor $unit`
- minor=`expr $card \* 65536 + $minor + $moduleminor`
- name=$card$modulename$unit
- rm -f tty*M$name
- mknod ttyM$name c $major $minor
- mknod ttyiM$name c $major `expr $minor + 64`
- mknod ttylM$name c $major `expr $minor + 128`
- chown root:wheel tty*M$name
- done
- done
- ;;
-
-cuaM?)
- umask 7
- portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
- modulelist="a b c d"
- major=101
- card=`expr $i : 'cua.*\(.\)$'`
- for unit in $modulelist
- do
- moduleminor=`ttyminor $unit`
- moduleminor=`expr $moduleminor % 10 \* 16`
- modulename=$unit
-
- for unit in $portlist
- do
- minor=`ttyminor $unit`
- minor=`expr $card \* 65536 + $minor + $moduleminor`
- name=$card$modulename$unit
- rm -f cua*M$name
- mknod cuaM$name c $major `expr $minor + 262144`
- mknod cuaiM$name c $major `expr $minor + 64 + 262144`
- mknod cualM$name c $major `expr $minor + 128 + 262144`
- chown uucp:dialer cua*M$name
- done
- done
- umask 77
- ;;
-
-ttyR?)
- major=81
- BOARD=1; MINOR=65536; Rnum=0
- MINOR=`expr $BOARD \* 65536`
- dmesg | grep ^RocketPort[0-4] > /tmp/rp_list
- controllers=`awk '{print $1}' < /tmp/rp_list`
- rm -f /dev/ttyR*; rm -f /dev/ttyiR*; rm -f /dev/ttylR*
- for i in $controllers;do
- ndevices=`grep ^$i /tmp/rp_list | sed -e 's/.* \([0-9]*\) ports/\1/'`
- echo -n "Creating $ndevices devices for $i: "
- for dev in `jot $ndevices 0`;do
- mknod /dev/ttyR$Rnum c $major $MINOR
- mknod /dev/ttylR$Rnum c $major `expr $MINOR + 32`
- mknod /dev/ttyiR$Rnum c $major `expr $MINOR + 64`
- Rnum=`expr $Rnum + 1`
- MINOR=`expr $MINOR + 1`
- done
- BOARD=`expr $BOARD + 1`
- MINOR=`expr $BOARD \* 65536`
- echo " "
- done
- ;;
-
-cuaR?)
- major=81
- BOARD=1; MINOR=65536; Rnum=0
- MINOR=`expr $BOARD \* 65536`
- dmesg | grep ^RocketPort[0-4] > /tmp/rp_list
- controllers=`awk '{print $1}' < /tmp/rp_list`
- rm -f /dev/cuaR*; rm -f /dev/cuaiR*; rm -f /dev/cualR*
- for i in $controllers;do
- ndevices=`grep ^$i /tmp/rp_list | sed -e 's/.* \([0-9]*\) ports/\1/'`
- echo -n "Creating $ndevices devices for $i: "
- for dev in `jot $ndevices 0`;do
- mknod /dev/cuaR$Rnum c $major `expr $MINOR + 128`
- mknod /dev/cualR$Rnum c $major `expr $MINOR + 128 + 32`
- mknod /dev/cuaiR$Rnum c $major `expr $MINOR + 128 + 64`
- Rnum=`expr $Rnum + 1`
- MINOR=`expr $MINOR + 1`
- done
- BOARD=`expr $BOARD + 1`
- MINOR=`expr $BOARD \* 65536`
- echo " "
- done
- chown uucp:dialer /dev/cuaR*
- ;;
-
-mse*)
- unit=`expr $i : 'mse\(.*\)'`
- chr=27
- mknod mse$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11
- ;;
-
-psm*)
- unit=`expr $i : 'psm\(.*\)'`
- chr=21
- mknod psm$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11
- ;;
-
-mouse*)
- name=`expr $i : 'mouse\(.*\)'`
- if [ ! -c $name ]; then
- $0 $name # make the appropriate device
- fi
- ln -fs $name mouse
- ;;
-
-pcaudio)
- mknod pcaudio c 24 0
- mknod pcaudioctl c 24 128
- ;;
-
-socksys)
- mknod socksys c 41 0
- mknod spx c 41 1
- ln -fs socksys nfsd
- chmod 666 socksys nfsd spx
- ;;
-
-snd*)
-#
-# changes from Linux voxware
-# minor Linux FreeBSD
-# 8 sequencer2 (aka music0) music0
-# 17 patmgr0 sequencer1
-# 33 patmgr1 sequencer2
-#
-
- unit=`expr $i : 'snd\(.*\)'`
- chr=30
-
- # XXX write this less verbosely, like std
- snd_security_hole=0 # XXX
- umask $snd_security_hole
-
- ln -fs mixer$unit mixer
- ln -fs sequencer$unit sequencer
- ln -fs dsp$unit dsp
- ln -fs audio$unit audio
- ln -fs dspW$unit dspW
- ln -fs music$unit music
- ln -fs pss$unit pss
-
- mknod mixer$unit c $chr `expr $unit '*' 16 + 0`
- mknod sequencer$unit c $chr `expr $unit '*' 16 + 1`
- mknod midi$unit c $chr `expr $unit '*' 16 + 2`
- mknod dsp$unit c $chr `expr $unit '*' 16 + 3`
- mknod audio$unit c $chr `expr $unit '*' 16 + 4`
- mknod dspW$unit c $chr `expr $unit '*' 16 + 5`
- mknod sndstat c $chr 6
- # minor number 7 is unused
- mknod music$unit c $chr `expr $unit '*' 16 + 8`
- mknod pss$unit c $chr `expr $unit '*' 16 + 9`
- # minor numbers 10-15 are unused
- umask 77
- ;;
-
-vat)
- mknod vatio c 25 128
- chmod 660 vatio
- ;;
-
-gsc*)
- unit=`expr $i : 'gsc\(.*\)'`
- mknod gsc${unit} c 47 $unit
- mknod gsc${unit}p c 47 $(($unit + 8))
- mknod gsc${unit}d c 47 $(($unit + 32))
- mknod gsc${unit}pd c 47 $(($unit + 40))
- chmod 666 gsc${unit}*
- ;;
-
-apm*)
- chr=39
- mknod apm c $chr 0
- mknod apmctl c $chr 8
- chgrp operator apm
- chgrp operator apmctl
- chmod 660 apm
- chmod 660 apmctl
- ;;
-
-card*)
- unit=`expr $i : 'card\(.*\)'`
- chr=50
- mknod card$unit c $chr $unit
- chmod 644 card$unit
- ;;
-
-ttyx?|ttyy?|ttyz?)
- case $i in
- *0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;;
- *4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;;
- *8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;;
- *c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;;
- esac
- case $i in
- ttyy?) unit=`expr $unit \+ 16`;;
- ttyz?) unit=`expr $unit \+ 32`;;
- esac
- mknod $i c 42 $unit
- chown uucp:wheel $i
- ;;
-
-cronyx)
- mknod cronyx c 42 63
- ;;
-
-joy)
- mknod joy0 c 51 0
- mknod joy1 c 51 1
- chgrp operator joy0 joy1
- chmod 640 joy0 joy1
- ;;
-
-spigot)
- mknod spigot c 11 0
- chmod 444 spigot
- ;;
-
-ctx?)
- unit=`expr $i : 'ctx\(.*\)'`
- mknod ctx$unit c 40 $unit
- chmod 444 ctx$unit
- ;;
-
-meteor?)
- unit=`expr $i : 'meteor\(.*\)'`
- mknod meteor$unit c 67 $unit
- chmod 444 meteor$unit
- ;;
-
-bktr?)
- unit=`expr $i : 'bktr\(.*\)'`
- mknod bktr$unit c 92 $unit
- mknod tuner$unit c 92 $((16 + $unit ))
- mknod vbi$unit c 92 $((32 + $unit ))
- chmod 444 bktr$unit tuner$unit vbi$unit
- ;;
-
-tun*)
- ntun=`expr $i : 'tun\(.*\)$'`
- unit=0
- while [ $unit -le $ntun ]; do
- mknod tun$unit c 52 $unit
- chown uucp:dialer tun$unit
- unit=`expr $unit + 1`
- done
- ;;
-
-sysmouse)
- mknod sysmouse c 12 128
- mknod consolectl c 12 255
- ;;
-
-snp?)
- unit=`expr $i : 'snp\(.*\)'`
- mknod snp$unit c 53 $unit
- ;;
-
-# dufault@hda.com: If I do much more work on other A-D boards
-# then eventually we'll have a "ad" and "dio" interface and some of these
-# "labpcaio" ones will be gone.
-# labpcaio: D-A and A-D.
-# labpcdio: Digital in and Digital out.
-#
-labpc*)
- umask 7
- case $i in
- labpcaio*)
- name=labpcaio
- unit=`expr $i : 'labpcaio\(.*\)'`
- all="0 1 2 3 4 5 6 7"
- offset=0
- ;;
- labpcdio*)
- name=labpcdio
- unit=`expr $i : 'labpcdio\(.*\)'`
- all="0 1 2 3"
- offset=8
- ;;
- *)
- die 3 "Don't know LabPC type $i"
- ;;
- esac
- if [ -z "${unit}" ]; then
- unit=all
- fi
- case $unit in
- 0|1|2|3|4|5|6|7)
- mknod $name$unit c 66 `expr $offset + $unit `
- ;;
- all)
- for i in $all
- do
- mknod $name$i c 66 `expr $offset + $i `
- done
- ;;
- *)
- echo "No such LabPC unit: $unit"
- ;;
- esac
- umask 77
- ;;
-
-perfmon)
- mknod perfmon c 2 32
- chgrp kmem perfmon
- chmod 640 perfmon
- ;;
-
-kbd*)
- unit=`expr $i : 'kbd\(.*\)'`
- chr=112
- mknod kbd$unit c $chr $unit
- ;;
-
-i4b)
- mknod i4b c 60 0
- chown root:wheel i4b
- chmod 600 i4b
- ;;
-
-i4bctl)
- mknod i4bctl c 55 0
- chown root:wheel i4bctl
- chmod 600 i4bctl
- ;;
-
-i4brbch*)
- unit=`expr $i : 'i4brbch\(.*\)'`
- mknod i4brbch$unit c 57 $unit
- chown root:wheel i4brbch$unit
- chmod 600 i4brbch$unit
- ;;
-
-i4bteld*)
- offset=64
- unit=`expr $i : 'i4bteld\(.*\)'`
- mknod i4bteld$unit c 56 `expr $offset + $unit `
- chown root:wheel i4bteld$unit
- chmod 600 i4bteld$unit
- ;;
-
-i4btel*)
- unit=`expr $i : 'i4btel\(.*\)'`
- mknod i4btel$unit c 56 $unit
- chown root:wheel i4btel$unit
- chmod 600 i4btel$unit
- ;;
-
-i4btrc*)
- unit=`expr $i : 'i4btrc\(.*\)'`
- mknod i4btrc$unit c 59 $unit
- chown root:wheel i4btrc$unit
- chmod 600 i4btrc$unit
- ;;
-
-local)
- umask 0 # XXX should be elsewhere
- sh MAKEDEV.local
- umask 77
- ;;
-
-*)
- echo $i - no such device name
- ;;
-
-esac
-done
OpenPOWER on IntegriCloud