diff options
Diffstat (limited to 'etc')
-rw-r--r-- | etc/MAKEDEV | 1778 | ||||
-rw-r--r-- | etc/MAKEDEV.local | 50 |
2 files changed, 0 insertions, 1828 deletions
diff --git a/etc/MAKEDEV b/etc/MAKEDEV deleted file mode 100644 index 72a8fe3..0000000 --- a/etc/MAKEDEV +++ /dev/null @@ -1,1778 +0,0 @@ -#!/bin/sh - -# -# Copyright (c) 1990 The Regents of the University of California. -# All rights reserved. -# -# Written and contributed by W. Jolitz 12/90 -# -# Redistribution and use in source and binary forms are permitted provided -# that: (1) source distributions retain this entire copyright notice and -# comment, and (2) distributions including binaries display the following -# acknowledgement: ``This product includes software developed by the -# University of California, Berkeley and its contributors'' in the -# documentation or other materials provided with the distribution and in -# all advertising materials mentioning features or use of this software. -# Neither the name of the University nor the names of its contributors may -# be used to endorse or promote products derived from this software without -# specific prior written permission. -# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. -# -# @(#)MAKEDEV 5.2 (Berkeley) 6/22/90 -# $FreeBSD$ -# -# Device "make" file. Valid arguments: -# all makes all known devices, standard number of units (or close) -# std standard devices -# jail suitable for a jail(8) -# local configuration specific devices -# mach-4 mach4&lites+devices for Mach's XFree86 distribution -# (see http://www.cs.hut.fi/lites.html for more info on LITES) -# -# Tapes: -# wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape -# sa* SCSI Sequential Access Devices -# -# Disks: -# aac* Adaptec FSA RAID controllers -# aacd* Adaptec FSA RAID -# acd* ATAPI CD-ROM disks -# amrd* AMI MegaRAID -# cd* SCSI CD-ROM disks -# da* SCSI Direct Access Devices -# fd* floppy disk drives (3 1/2", 5 1/4") -# fla* M-Systems DiskOnChip -# idad* Compaq Smart-2 RAID arrays -# mcd* Mitsumi CD-ROM disks -# md* Memory (or malloc) disk -# mlx* Mylex DAC960 RAID controllers -# mlxd* Mylex DAC960 RAID disk volumes -# mly* Mylex RAID controllers (newer models) -# scd* Sony CD-ROM disks -# wd* "Winchester" disk drives (ST506,IDE,ESDI,RLL,...) -# wfd* IDE floppy disk drives (LS-120) -# -# Console ports: -# vty* virtual console devices for syscons/pcvt/codrv -# -# Pointing devices: -# mse* Logitech and ATI Inport bus mouse -# psm* PS/2 mouse -# jogdial Sony VAIO jog dial -# sysmouse Mousesystems mouse emulator for syscons -# -# Time devices: -# refclock-* serial ports used by xntpd parse refclocks -# -# Terminal ports: -# tty* general purpose serial ports -# cua* dialout serial ports -# ttyA* Specialix SI/XIO dialin ports ('*' = number of devices) -# cuaA* Specialix SI/XIO dialout ports -# ttyDXX Digiboard Xi - 16 dialin ports (dgb) -# cuaDXX Digiboard Xi - 16 dialout ports (dgb) -# ttyDX.X Digiboards (work in progress) - 16 dialin ports (digi) -# cuaDX.X Digiboards (work in progress) - 16 dialout ports (digi) -# ttyM* Digiboard Xem - 16 dialin ports (dgm) -# cuaM* Digiboard Xem - 16 dialout ports (dgm) -# ttyR* Rocketport dialin ports -# cuaR* Rocketport dialout ports -# -# Pseudo terminals: -# pty* set of 32 master and slave pseudo terminals -# vty* virtual terminals using syscons/pcvt/codrv console -# -# Parallel port: -# lpt* Printer -# ppi* Parallel port i/o -# pps* Pulse per second timing interface -# pcfclock* Parallel time sync interface -# -# I2C and SMBus: -# iic* I2C devices -# smb* SMBUS devices -# -# USB devices: -# usb* USB bus control device -# ugen* generic USB device -# uhid* Human Interface Device (HID) -# ulpt* printer -# umodem* modems -# ums* mouse -# urio* Diamond Rio 500 -# uscanner* USB scanners -# ucom* USB serial devices -# -# SCSI devices (other than CD-ROM, tape and disk): -# ch* SCSI Media-Changer (juke box) driver -# pt* Processor Type (HP scanner, as one example) -# pass* CAM Passthrough device -# ses* SES (SCSI Environmental Services) and -# SAF-TE (Scsi Accessable Fault-Tolerant Enclosures) device -# -# PC-CARD (previously called PCMCIA) support -# card* PC-CARD slots -# -# ISDN devices: -# i4b isdnd call control device -# i4bctl debugging control device -# i4btrc* trace data interface(s), one per passive card -# i4btel* telephony interface(s) -# i4bteld* telephony dialout interface(s) -# i4brbch* raw b channel access device(s) -# -# Special purpose devices: -# acpi Advanced Configuration and Power Interface -# apm Advanced Power Management BIOS -# apmctl APM BIOS control device -# bpf* packet filter -# crypto crypto interface -# speaker pc speaker -# tw* xten power controller -# snd* various sound cards -# pcaudio PCM audio driver -# socksys iBCS2 socket system driver -# vat VAT compatibility audio driver (requires snd*) -# gsc Genius GS-4500 hand scanner -# joy pc joystick -# tun* Tunneling IP device -# tap* Ethernet Tunneling device -# snp* tty snoop devices -# spigot Video Spigot video acquisition card -# ctx* Cortex-I video acquisition card -# meteor* Matrox Meteor video acquisition card (pci) -# bktr* Bt848 based video acquisition card (pci) -# labpc* National Instrument's Lab-PC and LAB-PC+ -# perfmon CPU performance-monitoring counters -# pci PCI configuration-space access from user mode -# ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth) -# kbd keyboard devices -# 3dfx* 3dfx voodoo device for glide (tdfx) (/dev/3dfx,3dfxN,voodoo) -# agpgart AGP interface -# cfs* Coda Distributed Filesystem -# nsmb* SMB/CIFS protocol interface -# elan-mmcr AMD Elan support (e.g. mmap MMCR) -# - -if [ -n "$MAKEDEVPATH" ]; then - PATH="$MAKEDEVPATH" -else - PATH=/sbin:/bin -fi -umask 77 - -# Usage: die exitcode msg -die() { - echo $2 - exit $1 -} - -# Convert integer to partition name -dkitop() { - local p - - case $1 in - 0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;; - *) p="?";; - esac - echo $p -} - -# Convert integer to slice name -dkitos() { - local s - - case $1 in - 0) s="";; - 1) s="";; - *) s=s$(($1-1));; - esac - echo $s -} - -# Convert disk (type, unit, slice, partition) to minor number -dkminor() -{ - echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4)) -} - -# Print the hexadecimal representation of a decimal value from 0 to 15. -hexdigit() { - local d - - if [ $1 -lt 10 ]; then - d=$1 - else - case $1 in - 10) d=a;; 11) d=b;; 12) d=c;; 13) d=d;; 14) d=e;; 15) d=f;; - *) d="?";; - esac - fi - echo $d -} - -# Print the hexadecimal representation of an arbitrary decimal value. -hexprint() { - local dig - local str - local val - - val=$1 - str='' - dig=`hexdigit $(($val & 15))` - str=$dig$str - val=$(($val >> 4)) - while [ $val -gt 0 ]; do - dig=`hexdigit $(($val & 15))` - str=$dig$str - val=$(($val >> 4)) - done - echo $str -} - -# Override mknod(2) to add extra handling to it. -mknod=/sbin/mknod -for i in `IFS=':'; echo $PATH`; do - if [ -x "${i}/mknod" ]; then - mknod="${i}/mknod" - break - fi -done -mknod() { - rm -f "$1" || exit 1 - case $# in - 4) "$mknod" "$@" root:wheel || die 2 "$mknod $@ failed";; - 5) "$mknod" "$@" || die 2 "$mknod $@ failed";; - *) die 2 "bad node: mknod $@";; - esac -} - -# Convert tape (ctrl, unit, mode, access) to minor number -saminor() -{ - echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4)) -} - -# Convert the last character of a tty name to a minor number. -ttyminor() -{ - case $1 in - [0-9]) m=$1;; - a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;; - h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;; - o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;; - v) m=31;; - *) m="?";; - esac - echo $m -} - -# Convert a unit number to a minor number. -unit2minor() -{ - echo $(((($1 >> 8) << 16) | ($1 % 256))) -} - -# Zero-pad a value to the appropriate minimum length. -zeropad() { - local min - local val - - min=$1 - val=$2 - while [ ${#val} -lt $min ]; do - val=0$val - done - echo $val -} - -# Raw partition for disks -dkrawpart=2 - -# Compatibility slice for disks -dkcompatslice=0 - -# Raw slice for disks -dkrawslice=1 - -# Standard umasks -disk_umask=037 # allow group operator to read disks -tape_umask=017 # allow group operator to read/write tapes - -for i in $*; do -case $i in - -all) - sh $0 std # standard - sh $0 fd0 fd1 # floppy disk - sh $0 da0 da1 da2 da3 # SCSI disk - sh $0 ata # ATA control - sh $0 ad0 ad1 ad2 ad3 # ATA disk - sh $0 ar0 ar1 # ATA RAID disk - sh $0 acd0 acd0t0 afd0 ast0 # ATAPI devices - sh $0 wd0 wd1 wd2 wd3 # OLD disk - sh $0 wcd0 wfd0 wst0 # OLD ATAPI devs - sh $0 cd0 mcd0 scd0 # cdrom - sh $0 sa0 wt0 # tape - sh $0 vty12 # virtual tty - sh $0 cuaa0 cuaa1 cuaa2 cuaa3 # serial tty - sh $0 pty0 # pseudo tty - sh $0 ttyd0 ttyd1 ttyd2 ttyd3 # serial tty - sh $0 kbd0 kbd1 # keyboard - sh $0 mse0 psm0 jogdial sysmouse # mouse - sh $0 pcaudio speaker # noise - sh $0 lpt0 lpt1 lpt2 # printer - sh $0 ppi0 ppi1 ppi2 # parallel port - sh $0 iic0 iic1 # I2C device - sh $0 smb0 smb1 # SMBus device - sh $0 usb usb0 uhid0 ums0 ulpt0 ugen0 # USB devices - sh $0 urio0 uscanner0 umodem0 # USB devices too - sh $0 bpf0 bpf1 bpf2 bpf3 # network - sh $0 ipl tun0 tun1 tun2 tun3 # network - sh $0 tap0 tap1 tap2 tap3 # network - sh $0 ch0 perfmon tw0 # miscellaneous - sh $0 acpi # ACPI - sh $0 apm apmctl card0 card1 card2 card3 # laptop - sh $0 pass4 xpt2 # CAM - sh $0 i4b i4bctl i4btrc0 i4btrc1 # ISDN - sh $0 i4btel0 i4btel1 i4bteld0 i4bteld1 # ISDN - sh $0 i4brbch0 i4brbch1 # ISDN - sh $0 agpgart # AGP - sh $0 nsmb0 # SMB/CIFS - sh $0 ti0 ti1 # ti(4) - sh $0 crypto # crypto - ;; - -# a much restricted set of the above, to save precious i-nodes on the -# fixit floppy -fixit) - sh $0 std # standard - sh $0 fd0 # floppy disk - sh $0 da0 # SCSI disk - sh $0 ad0 # ATA disk - sh $0 acd0 afd0 ast0 # ATAPI devices - sh $0 wd0 # OLD disk - sh $0 wcd0 wfd0 wst0 # OLD ATAPI devs - sh $0 cd0 # cdrom - sh $0 sa0 # tape - sh $0 vty2 # virtual tty - sh $0 cuaa0 # serial tty - sh $0 pty0 # pseudo tty - sh $0 ttyd0 # serial tty - sh $0 kbd0 # keyboard - sh $0 mse0 psm0 jogdial sysmouse # mouse - sh $0 lpt0 # printer - sh $0 ppi0 # parallel port - sh $0 iic0 # I2C device - sh $0 smb0 # SMBus device - sh $0 ums0 # USB devices - sh $0 tun0 # network - sh $0 tap0 # network - sh $0 ch0 # miscellaneous - sh $0 acpi # ACPI - sh $0 apm apmctl card0 # laptop - sh $0 pass1 xpt1 # CAM - sh $0 i4b i4bctl i4btrc0 i4btrc1 # ISDN - sh $0 i4btel0 i4bteld0 # ISDN - sh $0 i4brbch0 # ISDN - rm -f fd/[1-9]? - ;; - -std) - mknod console c 0 0; chmod 600 console - mknod kmem c 2 1 root:kmem; chmod 640 kmem - mknod mem c 2 0 root:kmem; chmod 640 mem - mknod null c 2 2; chmod 666 null - mknod random c 2 3; chmod 666 random - ln -f random urandom - mknod zero c 2 12; chmod 666 zero - mknod io c 2 14; chmod 600 io - mknod tty c 1 0; chmod 666 tty - mknod klog c 7 0; chmod 600 klog - mknod pci c 78 0; chmod 644 pci - mknod mdctl c 95 0xffff00ff; chmod 600 mdctl - mkdir -p fd - (cd fd && i=0 && - while [ $i -lt 64 ]; do - mknod $i c 22 $i - i=$(($i + 1)) - done - ) - chmod 555 fd - chmod 666 fd/* - ln -sf fd/0 stdin - ln -sf fd/1 stdout - ln -sf fd/2 stderr - ;; - -jail) - sh $0 std pty0 - rm mem kmem pci io klog console # for security - ln -sf null mem # for libkvm (ab)users - ln -sf null kmem # --//-- - ln -sf null console - ;; - -mach-4) - mknod iopl c 22 0 - mknod kbd c 23 0 - mknod mouse c 24 0 - mknod time c 25 0 - mknod timezone c 26 0 - ;; - -# Create device files for new Archive/Wangtek QIC-02 tape driver (vak) -wt*) - umask $tape_umask - u=`expr $i : '..\(.*\)'` - if [ -z "${u}" ]; then u=0; fi - # default density, 512b blocks - mknod rwt${u} c 10 $(( 0 + $u)) root:operator - mknod nrwt${u} c 10 $(( 4 + $u)) root:operator - # default density, 1024b blocks -# mknod rWt${u} c 10 $((64 + $u)) root:operator -# mknod nrWt${u} c 10 $((68 + $u)) root:operator - mknod rwt${u}b c 10 $((16 + $u)) root:operator # 60 megabytes - mknod nrwt${u}b c 10 $((20 + $u)) root:operator - mknod rwt${u}c c 10 $((24 + $u)) root:operator # 120 megabytes - mknod nrwt${u}c c 10 $((28 + $u)) root:operator - mknod rwt${u}d c 10 $((32 + $u)) root:operator # 150 megabytes - mknod nrwt${u}d c 10 $((36 + $u)) root:operator -# mknod rwt${u}e c 10 $((40 + $u)) root:operator # 300 megabytes? -# mknod nrwt${u}e c 10 $((44 + $u)) root:operator -# mknod rwt${u}f c 10 $((48 + $u)) root:operator # 600 megabytes? -# mknod nrwt${u}f c 10 $((52 + $u)) root:operator - umask 77 - ;; - -raidctl) - mknod raidctl c 201 0 - ;; - -# Individual slices. -aacd*s*|ad*s*|ar*s*|afd*s*|amrd*s*|da*s*|fla*s*|idad*s*|md*s*|mlxd*s*|twed*s*|wd*s*|wfd*s*|raid*s*) - umask $disk_umask - case $i in - aacd*s*) name=aacd; chr=151;; - ad*s*) name=ad; chr=116;; - ar*s*) name=ar; chr=157;; - afd*s*) name=afd; chr=118;; - amrd*s*) name=amrd; chr=133;; - da*s*) name=da; chr=13;; - fla*s*) name=fla; chr=102;; - idad*s*) name=idad; chr=109;; - md*s*) name=md; chr=95;; - mlxd*s*) name=mlxd; chr=131;; - twed*s*) name=twed; chr=147;; - wd*s*) name=wd; chr=3;; - wfd*s*) name=wfd; chr=87;; - raid*s*) name=raid; chr=200;; - esac - case $i in - aacd*s*|amrd*s*|idad*s*|mlxd*s*|twed*s*|raid*s*) - unit=`expr $i : '....\([0-9]*\)s'` - slice=`expr $i : '....[0-9]*s\([0-9]*\)'` - part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'` - ;; - afd*s*|fla*s*|wfd*s*) - unit=`expr $i : '...\([0-9]*\)s'` - slice=`expr $i : '...[0-9]*s\([0-9]*\)'` - part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'` - ;; - *) - unit=`expr $i : '..\([0-9]*\)s'` - slice=`expr $i : '..[0-9]*s\([0-9]*\)'` - part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'` - ;; - esac - case $unit in - [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1]) - case $slice in - [0-9]|[1-2][0-9]|30) - oldslice=$slice - slice=$(($slice+1)) - slicename=`dkitos $slice` - minor=`dkminor 0 $unit $slice $dkrawpart` - mknod $name$unit$slicename c $chr $minor root:operator - ln -f $name$unit$slicename r$name$unit$slicename - case $part in - [a-h]) - case $oldslice in - 0) slice=$oldslice ;; - esac - for part in 0 1 2 3 4 5 6 7 - do - minor=`dkminor 0 $unit $slice $part` - partname=`dkitop $part` - mknod $name$unit$slicename$partname \ - c $chr $minor root:operator - ln -f $name$unit$slicename$partname \ - r$name$unit$slicename$partname - done - ;; - "") - ;; - *) - echo bad partition for disk in: $i - ;; - esac - ;; - *) - echo bad slice for disk in: $i - ;; - esac - ;; - *) - echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)" - ;; - esac - umask 77 - ;; - -fd*) - umask $disk_umask - unit=`expr $i : '..\(.*\)'` - name=fd; chr=9 - case $unit in - 0|1|2|3) - mknod ${name}${unit} c $chr $(($unit * 64)) root:operator - # Fake BSD partitions - for i in a b c d e f g h - do - ln -f ${name}${unit} ${name}${unit}$i - done - ;; - *) - echo bad unit for disk in: $i - ;; - esac - umask 77 - ;; - -ata) - umask 177 - mknod ata c 159 0 root:operator - umask 77 - ;; - - -aacd*|ad*|ar*|afd*|amrd*|da*|fla*|idad*|md*|mlxd*|twed*|wd*|wfd*|raid*) - umask $disk_umask - case $i in - aacd*) name=aacd; chr=151;; - ad*) name=ad; chr=116;; - ar*) name=ar; chr=157;; - afd*) name=afd; chr=118;; - amrd*) name=amrd; chr=133;; - da*) name=da; chr=13;; - fla*) name=fla; chr=102;; - idad*) name=idad; chr=109;; - md*) name=md; chr=95;; - mlxd*) name=mlxd; chr=131;; - twed*) name=twed; chr=147;; - wd*) name=wd; chr=3;; - wfd*) name=wfd; chr=87;; - raid*) name=raid; chr=200;; - esac - case $i in - aacd*|amrd*|idad*|mlxd*|twed*|raid*) - unit=`expr $i : '....\(.*\)'` - ;; - afd*|fla*|wfd*) - unit=`expr $i : '...\(.*\)'` - ;; - *) - unit=`expr $i : '..\(.*\)'` - ;; - esac - case $unit in - [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1]) - for slicepartname in s0h s1h s2 s3 s4 - do - sh $0 $name$unit$slicepartname - done - ;; - *) - echo bad unit for disk in: $i - ;; - esac - umask 77 - ;; - -ccd*) - umask $disk_umask - name=ccd - chr=74 - unit=`expr $i : '...\(.*\)'` - case $unit in - [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1]) - for part in 0 1 2 3 4 5 6 7 - do - minor=`dkminor 0 $unit 0 $part` - partname=`dkitop $part` - mknod $name$unit$partname c $chr $minor root:operator - ln -f $name$unit$partname r$name$unit$partname - done - ;; - *) - echo bad unit for disk in: $i - ;; - esac - umask 77 - ;; - -# SCSI processor type driver -pt[0-9]*) - chr=61 - name=pt - unit=`expr $i : 'pt\([0-9][0-9]*\)'` - if [ -z "${unit}" ]; then - unit=0 - fi - unit=$(($unit + 1 - 1)) - mknod ${name}${unit} c $chr `unit2minor $unit` - ;; - -# SCSI SES/SAF-TE type driver -ses[0-9]*) - chr=110 - name=ses - unit=`expr $i : 'ses\([0-9][0-9]*\)'` - if [ -z "${unit}" ]; then - unit=0 - fi - unit=$(($unit + 1 - 1)) - mknod ${name}${unit} c $chr `unit2minor $unit` - ;; -# SCSI target mode sample driver -targ[0-9]*) - chr=65 - name=targ - unit=`expr $i : 'targ\([0-9][0-9]*\)'` - if [ -z "${unit}" ]; then - unit=0 - fi - unit=$(($unit + 1 - 1)) - mknod ${name}${unit} c $chr `unit2minor $unit` - mknod ${name}.ctl c $chr 0xffff00ff - ;; - -# CAM transport layer device -xpt*) - # This major number is temporary - chr=104 - name=xpt - units=`expr $i : 'xpt\(.*\)'` - if [ -z "${units}" ]; then - units=1 - fi - i=0 - while [ $i -lt $units ]; do - dname=$name$i - rm -rf $dname r$dname - mknod $dname c $chr `unit2minor $i` root:operator - i=$(($i + 1)) - done - ;; - -# CAM passthrough device -pass*) - # This major number is temporary - chr=31 - name=pass - units=`expr $i : 'pass\(.*\)'` - if [ -z "${units}" ]; then - units=1 - fi - i=0 - while [ $i -lt $units ]; do - dname=$name$i - rm -rf $dname r$dname - mknod $dname c $chr `unit2minor $i` root:operator - i=$(($i + 1)) - done - ;; -pty*) - class=`expr $i : 'pty\(.*\)'` - case $class in - 0) offset=0 name=p;; - 1) offset=32 name=q;; - 2) offset=64 name=r;; - 3) offset=96 name=s;; -# Note that xterm (at least) only look at p-s. - 4) offset=128 name=P;; - 5) offset=160 name=Q;; - 6) offset=192 name=R;; - 7) offset=224 name=S;; - # This still leaves [tuTU]. - *) echo bad unit for pty in: $i;; - esac - umask 0 - case $class in - 0|1|2|3|4|5|6|7) - i=0 - while [ $i -lt 32 ]; do -# This was an awk substr() before. - c=$(echo 0123456789abcdefghijklmnopqrstuv | - dd bs=1 skip=$i count=1 2>/dev/null) - mknod tty$name$c c 5 $(($offset + $i)) - mknod pty$name$c c 6 $(($offset + $i)) - i=$(($i + 1)) - done - ;; - esac - umask 77 - ;; - -sa*) - umask $tape_umask - unit=`expr $i : '..\(.*\)'` - chr=14 - - case $unit in - [0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]) - mknod sa${unit}.ctl c $chr `saminor 1 ${unit} 0 0` - ln -f sa${unit}.ctl rsa${unit}.ctl - for m in 0 1 2 3 - do - mknod sa${unit}.${m} c $chr \ - `saminor 0 ${unit} ${m} 0` root:operator - ln -f sa${unit}.${m} rsa${unit}.${m} - mknod nsa${unit}.${m} c $chr \ - `saminor 0 ${unit} ${m} 1` root:operator - ln -f nsa${unit}.${m} nrsa${unit}.${m} - mknod esa${unit}.${m} c $chr \ - `saminor 0 ${unit} ${m} 2` root:operator - ln -f esa${unit}.${m} ersa${unit}.${m} - done - ln -f sa${unit}.0 sa${unit} - ln -f sa${unit}.0 rsa${unit}.0 - ln -f sa${unit}.0 rsa${unit} - ln -f nsa${unit}.0 nsa${unit} - ln -f nsa${unit}.0 nrsa${unit}.0 - ln -f nsa${unit}.0 nrsa${unit} - ln -f esa${unit}.0 esa${unit} - ln -f esa${unit}.0 ersa${unit}.0 - ln -f esa${unit}.0 ersa${unit} - ;; - *) - echo bad unit for tape in: $i - ;; - esac - umask 77 - ;; - -ch*) - umask 37 - unit=`expr $i : '..\(.*\)'` - case $i in - ch*) name=ch; chr=17;; - esac - case $unit in - 0|1|2|3|4|5|6) - mknod ${name}${unit} c $chr $unit root:operator - ;; - *) - echo bad unit for media changer in: $i - ;; - esac - umask 77 - ;; - -ast*) - umask 2 ; - unit=`expr $i : '...\(.*\)'` - chr=119 - case $unit in - 0|1|2|3) - mknod ast${unit} c $chr $(($unit * 8 + 0)) root:operator - chmod 640 ast${unit} - mknod nast${unit} c $chr $(($unit * 8 + 1)) root:operator - chmod 640 nast${unit} - ;; - *) - echo bad unit for tape in: $i - ;; - esac - umask 77 - ;; - -acd*t*) - umask $disk_umask - units=`expr $i : '...\(.*\)t'`; - tracks=`expr $i : '.*t\(.*\)'`; - name=acd; - chr=117; - if [ -z "${units}" ]; then - units=0 - fi - if [ -z "${tracks}" ]; then - tracks=100 - fi - if [ "${units}" -le 31 -a "${tracks}" -le 169 ]; then - i=0 - while [ $i -le $units ]; do - dname=$name$i - rm -rf ${dname}t* - j=1 - while [ $j -le ${tracks} ]; do - mknod ${dname}t$j c $chr \ - $((($i * 8) + (65536 * $j))) \ - root:operator - j=$(($j + 1)) - done - i=$(($i + 1)) - done - else - echo "$i is invalid -- can't have more than 32 cd devices or 169 tracks" - fi - umask 77 - ;; - -acd*|cd*|mcd*|scd*) - umask $disk_umask - case $i in - acd*) units=`expr $i : '...\(.*\)'`; name=acd; chr=117;; - cd*) units=`expr $i : '..\(.*\)'`; name=cd; chr=15;; - mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; chr=29;; - scd*) units=`expr $i : '...\(.*\)'`; name=scd; chr=45;; - esac - if [ -z "${units}" ]; then - units=0 - fi - if [ "${units}" -le 31 ]; then - i=0 - while [ $i -le $units ]; do - dname=$name$i - rm -rf ${dname}[!t]* r${dname}* - mknod ${dname}a c $chr $(($i * 8)) root:operator - mknod ${dname}c c $chr $(($i * 8 + 2)) root:operator - ln -f ${dname}a r${dname}a - ln -f ${dname}c r${dname}c - i=$(($i + 1)) - done - else - echo "$i is invalid -- can't have more than 32 cd devices" - fi - umask 77 - ;; - -wcd*) - umask 2 ; - unit=`expr $i : '...\(.*\)'` - chr=69 - case $unit in - 0|1|2|3|4|5|6|7) - mknod wcd${unit}a c $chr $(($unit * 8 + 0)) root:operator - mknod wcd${unit}c c $chr $(($unit * 8 + 2)) root:operator - ln -f wcd${unit}a rwcd${unit}a - ln -f wcd${unit}c rwcd${unit}c - chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h] - ;; - *) - echo bad unit for disk in: $i - ;; - esac - umask 77 - ;; - -wst*) - umask 2 ; - unit=`expr $i : '...\(.*\)'` - chr=90 - case $unit in - 0|1|2|3) - mknod rwst${unit} c $chr $(($unit * 8 + 0)) root:operator - chmod 640 rwst${unit} - ;; - esac - umask 77 - ;; - -iic*) - unit=`expr $i : 'iic\(.*\)'` - mknod iic$unit c 105 `unit2minor $unit` - ;; - -smb*) - unit=`expr $i : 'smb\(.*\)'` - mknod smb$unit c 106 `unit2minor $unit` - ;; - -pcfclock*) - unit=`expr $i : 'pcfclock\(.*\)'` - mknod pcfclock$unit c 140 `unit2minor $unit` - ;; - -ppi*) - unit=`expr $i : 'ppi\(.*\)'` - mknod ppi$unit c 82 `unit2minor $unit` - ;; - -pps*) - unit=`expr $i : 'pps\(.*\)'` - mknod pps$unit c 89 `unit2minor $unit` - ;; - -usb) - mknod usb c 108 255 root:operator - chmod 0660 usb - ;; - -usb*) - umask 7 - unit=`expr $i : 'usb\(.*\)'` - mknod usb$unit c 108 `unit2minor $unit` root:operator - umask 77 - ;; - -uhid*) - umask 7 - unit=`expr $i : 'uhid\(.*\)'` - mknod uhid$unit c 122 `unit2minor $unit` root:operator - umask 77 - ;; - -ums*) - umask 7 - unit=`expr $i : 'ums\(.*\)'` - mknod ums$unit c 111 `unit2minor $unit` root:operator - umask 77 - ;; - -ulpt*) - unit=`expr $i : 'ulpt\(.*\)'` - minor=`unit2minor $unit` - mknod ulpt$unit c 113 $minor - minor=`unit2minor $(($unit + 64))` - mknod unlpt$unit c 113 $minor # and the 'no prime' version - ;; - -ugen*) - umask 7 - unit=`expr $i : 'ugen\([0-9][0-9]*\)'` - endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'` - if [ -z "${unit}" ]; then - echo $i - Invalid unit number - fi - if [ -z "${endpoint}" ]; then # ugen0 & ugen0.1 - ugen0.15 - mknod ugen$unit c 114 \ - `unit2minor $(($unit * 16))` root:operator - i=1 - while [ $i -lt 16 ]; do - mknod ugen$unit.$i c 114 \ - `unit2minor $(($unit * 16 + $i))` root:operator - i=$(($i + 1)) - done - else - minor=`unit2minor $(($unit * 16 + $endpoint))` - mknod ugen$unit.$endpoint c 114 $minor root:operator - fi - umask 77 - ;; - -urio*) - umask 7 - unit=`expr $i : 'urio\(.*\)'` - mknod urio$unit c 143 `unit2minor $unit` root:operator - umask 77 - ;; - -ucom*) - umask 7 - unit=`expr $i : 'ucom\(.*\)'` - minor=`unit2minor $(($unit + 128))` - mknod ucom$unit c 138 $minor uucp:dialer - umask 77 - ;; - -uscanner*) - umask 7 - unit=`expr $i : 'uscanner\(.*\)'` - mknod uscanner$unit c 156 `unit2minor $unit` root:operator - umask 77 - ;; - -umodem*) - umask 7 - unit=`expr $i : 'umodem\(.*\)'` - mknod umodem$unit c 124 `unit2minor $unit` uucp:dialer - umask 77 - ;; - -lpt*) - unit=`expr $i : 'lpt\(.*\)'` - mknod lpt$unit c 16 `unit2minor $unit` - mknod lpctl$unit c 16 `unit2minor $(($unit + 128))` - ;; - -# Use this to create virtual consoles for syscons, pcvt or codrv -# ttyv0-b -# use as MAKEDEV vtyNN to create NN entries -vty*) - chr=12 - units=`expr $i : 'vty\(.*\)'` - i=0 - while [ $i -lt $units ]; do - mknod ttyv$(hexprint $i) c $chr `unit2minor $i` - i=$(($i + 1)) - done - ln -fs ttyv0 vga # XXX X still needs this pccons relic - ;; - -nmdm*) - units=`expr $i : 'nmdm\(.*\)'` - chr=18 - i=0 - while [ $i -lt $units ]; do - minor=`unit2minor $i` - minor=$(($minor + $minor)) - mknod nmdm${i}A c $chr $minor - mknod nmdm${i}B c $chr $(($minor + 1)) - i=$(($i + 1)) - done - ;; - -bpf*) - units=`expr $i : 'bpf\(.*\)$'` - unit=0 - while [ $unit -le $units ]; do - mknod bpf$unit c 23 `unit2minor $unit` - unit=$(($unit + 1)) - done - ;; - -speaker) - mknod speaker c 26 0 - ;; - -cua?|cuaa?|cuaa??) - umask 7 - unit_low=`expr $i : 'cua.*\(.\)$'` - case $i in - cua?|cuaa?) - unit_high="" - m_high=0 - ;; - cuaa??) - unit_high=`expr $i : 'cuaa\(.\).$'` - m_high=`ttyminor $unit_high` - ;; - esac - unit=$unit_high$unit_low - m=$(($m_high << 16 | `ttyminor $unit_low`)) - mknod cuaa$unit c 28 $(($m | 128)) uucp:dialer - mknod cuaia$unit c 28 $(($m | 32 | 128)) uucp:dialer - mknod cuala$unit c 28 $(($m | 64 | 128)) uucp:dialer - umask 77 - ;; - -tty?|tty0?|ttyd?|ttyd??) - unit_low=`expr $i : 'tty.*\(.\)$'` - case $i in - tty?|tty0?|ttyd?) - unit_high="" - m_high=0 - ;; - ttyd??) - unit_high=`expr $i : 'ttyd\(.\).$'` - m_high=`ttyminor $unit_high` - ;; - esac - unit=$unit_high$unit_low - m=$(($m_high << 16 | `ttyminor $unit_low`)) - mknod ttyd$unit c 28 $m - mknod ttyid$unit c 28 $(($m | 32)) - mknod ttyld$unit c 28 $(($m | 64)) - ;; - -cuac?) - umask 7 - portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f - g h i j k l m n o p q r s t u v" - major=48 - card=`expr $i : 'cua.*\(.\)$'` - for unit in $portlist - do - minor=`ttyminor $unit` - minor=$(($card * 65536 + $minor)) - name=$card$unit - mknod cuac$name c $major $(($minor + 128)) uucp:dialer - mknod cuaic$name c $major $(($minor + 32 + 128)) uucp:dialer - mknod cualc$name c $major $(($minor + 64 + 128)) uucp:dialer - done - umask 77 - ;; - -ttyc?) - portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f - g h i j k l m n o p q r s t u v" - major=48 - card=`expr $i : 'tty.*\(.\)$'` - for unit in $portlist - do - minor=`ttyminor $unit` - minor=$(($card * 65536 + $minor)) - name=$card$unit - mknod ttyc$name c $major $minor - mknod ttyic$name c $major $(($minor + 32)) - mknod ttylc$name c $major $(($minor + 64)) - done - ;; - -# RISCom8 'rc' driver entries - -cuam?) - umask 7 - unit=`expr $i : 'cua.*\(.\)$'` - m=`ttyminor $unit` - mknod cuam$unit c 63 $(($m + 128)) uucp:dialer - umask 77 - ;; - -ttym?) - unit=`expr $i : 'tty.*\(.\)$'` - m=`ttyminor $unit` - mknod ttym$unit c 63 $m - ;; - -# Specialix SI/XIO. -# Note: these are 'base 1' to match the numbers on the panels, and to match -# the manual that comes with the system. -ttyA*) - major=68 - units=`expr $i : 'ttyA\(.*\)$'` - port=1 - while [ $port -le $units ]; do - minor=$(($port - 1)) - name=$(zeropad 2 $port) - mknod ttyA$name c $major $minor - mknod ttyiA$name c $major $(($minor + 65536)) - mknod ttylA$name c $major $(($minor + 131072)) - port=$(($port + 1)) - done - # For the user-mode control program, 'sicontrol' - mknod si_control c 68 262144 - ;; - -cuaA*) - umask 7 - major=68 - units=`expr $i : 'cuaA\(.*\)$'` - port=1 - while [ $port -le $units ]; do - minor=$(($port - 1)) - name=$(zeropad 2 $port) - mknod cuaA$name c $major $(($minor + 128)) uucp:dialer - mknod cuaiA$name c $major $(($minor + 128 + 65536)) \ - uucp:dialer - mknod cualA$name c $major $(($minor + 128 + 131072)) \ - uucp:dialer - port=$(($port + 1)) - done - umask 77 - ;; - -# Alpha AS8[24]00 (TurboLaser) console. -zs?) - unit=`expr $i : 'zs.*\(.\)$'` - m=`ttyminor $unit` - mknod zs$unit c 135 $m - ;; - -# Digiboard PC/?? 16 port card. -# The current scheme of minor numbering is: -# -# unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5} -# -# CARD bitfield in future versions may be extended to 3 bits. -# -# See dgb(4) -# -ttyD?) - portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" - major=58 - card=`expr $i : 'tty.*\(.\)$'` - for unit in $portlist - do - minor=`ttyminor $unit` - minor=$(($card * 65536 + $minor)) - name=$card$unit - mknod ttyD$name c $major $minor - mknod ttyiD$name c $major $(($minor + 32)) - mknod ttylD$name c $major $(($minor + 64)) - done - - # Also create devices for the digi driver - umask 7 - major=162 - card=`expr $i : 'tty.*\(.\)$'` - rm -f digi$card.ctl - mknod digi$card.ctl c $major $(($card * 65536 + 8388608)) uucp:dialer - unit=0 - while [ $unit -lt 16 ] - do - base=$(($card * 65536 + $unit)) - name=$card.$unit - rm -f tty*D$name - mknod ttyD$name c $major $base - mknod ttyiD$name c $major $(($base + 1048576)) - mknod ttylD$name c $major $(($base + 2097152)) - unit=$(($unit + 1)) - done - umask 77 - ;; - -cuaD?) - umask 7 - portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" - major=58 - card=`expr $i : 'cua.*\(.\)$'` - for unit in $portlist - do - minor=`ttyminor $unit` - minor=$(($card * 65536 + $minor)) - name=$card$unit - mknod cuaD$name c $major $(($minor + 128)) uucp:dialer - mknod cuaiD$name c $major $(($minor + 32 + 128)) uucp:dialer - mknod cualD$name c $major $(($minor + 64 + 128)) uucp:dialer - done - - # Also create devices for the digi driver - major=162 - card=`expr $i : 'cua.*\(.\)$'` - rm -f digi$card.ctl - mknod digi$card.ctl c $major $(($card * 65536 + 8388608)) uucp:dialer - unit=0 - while [ $unit -lt 16 ] - do - base=$(($card * 65536 + $unit)) - name=$card.$unit - rm -f cua*D$name - mknod cuaD$name c $major $(($base + 4194304)) uucp:dialer - mknod cuaiD$name c $major $(($base + 5242880)) uucp:dialer - mknod cualD$name c $major $(($base + 6291456)) uucp:dialer - unit=$(($unit + 1)) - done - umask 77 - ;; - -# Digiboard Xem - superceeded by the digi device above -# -ttyM*) - portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" - modulelist="a b c d" - major=101 - card=`expr $i : 'tty.*\(.\)$'` - for unit in $modulelist - do - moduleminor=`ttyminor $unit` - moduleminor=$(($moduleminor % 10 * 16)) - modulename=$unit - - for unit in $portlist - do - minor=`ttyminor $unit` - minor=$(($card * 65536 + $minor + $moduleminor)) - name=$card$modulename$unit - rm -f tty*M$name - mknod ttyM$name c $major $minor - mknod ttyiM$name c $major $(($minor + 64)) - mknod ttylM$name c $major $(($minor + 128)) - done - done - ;; - -cuaM?) - umask 7 - portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" - modulelist="a b c d" - major=101 - card=`expr $i : 'cua.*\(.\)$'` - for unit in $modulelist - do - moduleminor=`ttyminor $unit` - moduleminor=$(($moduleminor % 10 * 16)) - modulename=$unit - - for unit in $portlist - do - minor=`ttyminor $unit` - minor=$(($card * 65536 + $minor + $moduleminor)) - name=$card$modulename$unit - rm -f cua*M$name - mknod cuaM$name c $major $(($minor + 262144)) \ - uucp:dialer - mknod cuaiM$name c $major $(($minor + 64 + 262144)) \ - uucp:dialer - mknod cualM$name c $major $(($minor + 128 + 262144)) \ - uucp:dialer - done - done - umask 77 - ;; - -ttyR?) - major=81 - BOARD=1; Rnum=0 - MINOR=$(($BOARD * 65536)) - controllers=$( - dmesg | while read first rest; do - case "$first" in - RocketPort[0-4]) - echo "$first" - ;; - esac - done - ) - rm -f ttyR* ttyiR* ttylR* - for i in $controllers; do - ndevices=$( - dmesg | while read first foo bar ports rest; do - case "$first" in - $i*) - echo "$ports" - ;; - esac - done - ) - echo -n "Creating $ndevices devices for $i: " - dev=0 - while [ $dev -lt $ndevices ]; do - mknod ttyR$Rnum c $major $MINOR - mknod ttyiR$Rnum c $major $(($MINOR + 32)) - mknod ttylR$Rnum c $major $(($MINOR + 64)) - Rnum=$(($Rnum + 1)) - MINOR=$(($MINOR + 1)) - dev=$(($dev + 1)) - done - BOARD=$(($BOARD + 1)) - MINOR=$(($BOARD * 65536)) - echo " " - done - ;; - -cuaR?) - major=81 - BOARD=1; Rnum=0 - MINOR=$(($BOARD * 65536)) - controllers=$( - dmesg | while read first rest; do - case "$first" in - RocketPort[0-4]) - echo "$first" - ;; - esac - done - ) - rm -f cuaR* cuaiR* cualR* - for i in $controllers; do - ndevices=$( - dmesg | while read first foo bar ports rest; do - case "$first" in - $i*) - echo "$ports" - ;; - esac - done - ) - echo -n "Creating $ndevices devices for $i: " - dev=0 - while [ $dev -lt $ndevices ]; do - mknod cuaR$Rnum c $major $(($MINOR + 128)) uucp:dialer - mknod cuaiR$Rnum c $major $(($MINOR + 128 + 32)) \ - uucp:dialer - mknod cualR$Rnum c $major $(($MINOR + 128 + 64)) \ - uucp:dialer - Rnum=$(($Rnum + 1)) - MINOR=$(($MINOR + 1)) - dev=$(($dev + 1)) - done - BOARD=$(($BOARD + 1)) - MINOR=$(($BOARD * 65536)) - echo " " - done - ;; - -mse*) - unit=`expr $i : 'mse\(.*\)'` - chr=27 - # non-blocking for X11 - mknod mse$unit c $chr `unit2minor $(($unit * 2 + 1))` - ;; - -psm*) - unit=`expr $i : 'psm\(.*\)'` - chr=21 - # non-blocking for X11 - mknod psm$unit c $chr `unit2minor $(($unit * 2 + 1))` - ;; - -mouse*) - name=`expr $i : 'mouse\(.*\)'` - if [ ! -c $name ]; then - $0 $name # make the appropriate device - fi - ln -fs $name mouse - ;; - -pcaudio) - mknod pcaudio c 24 0 - mknod pcaudioctl c 24 128 - ;; - -socksys) - mknod socksys c 41 0 - mknod spx c 41 1 - ln -fs socksys nfsd - chmod 666 socksys nfsd spx - ;; - -snd*) -# -# changes from Linux voxware -# minor Linux FreeBSD -# 8 sequencer2 (aka music0) music0 -# 17 patmgr0 sequencer1 -# 33 patmgr1 sequencer2 -# - - unit=`expr $i : 'snd\(.*\)'` - chr=30 - - # XXX write this less verbosely, like std - snd_security_hole=0 # XXX - umask $snd_security_hole - - ln -fs mixer$unit mixer - ln -fs sequencer$unit sequencer - ln -fs dsp$unit dsp - ln -fs audio$unit audio - ln -fs dspW$unit dspW - ln -fs music$unit music - ln -fs pss$unit pss - - mknod mixer$unit c $chr `unit2minor $(($unit * 16 + 0))` - mknod sequencer$unit c $chr `unit2minor $(($unit * 16 + 1))` - mknod midi$unit c $chr `unit2minor $(($unit * 16 + 2))` - mknod dsp$unit c $chr `unit2minor $(($unit * 16 + 3))` - mknod audio$unit c $chr `unit2minor $(($unit * 16 + 4))` - mknod dspW$unit c $chr `unit2minor $(($unit * 16 + 5))` - mknod sndstat c $chr 6 - # minor number 7 is unused - mknod music$unit c $chr `unit2minor $(($unit * 16 + 8))` - mknod pss$unit c $chr `unit2minor $(($unit * 16 + 9))` - # minor number 10 is unused - mknod midistat c $chr 11 - # minor numbers 12-15 are unused - umask 77 - ;; - -vat) - mknod vatio c 25 128 - chmod 660 vatio - ;; - -gsc*) - unit=`expr $i : 'gsc\(.*\)'` - mknod gsc${unit} c 47 `unit2minor $unit` - mknod gsc${unit}p c 47 `unit2minor $(($unit + 8))` - mknod gsc${unit}d c 47 `unit2minor $(($unit + 32))` - mknod gsc${unit}pd c 47 `unit2minor $(($unit + 40))` - chmod 666 gsc${unit}* - ;; - -acpi) - mknod acpi c 152 0 root:operator - chmod 660 acpi - ;; - -apm) - mknod apm c 39 0 root:operator - chmod 664 apm - ;; - -apmctl) - mknod apmctl c 39 8 root:operator - chmod 660 apmctl - ;; - -card*) - unit=`expr $i : 'card\(.*\)'` - chr=50 - mknod card$unit c $chr `unit2minor $unit` - chmod 644 card$unit - ;; - -ti*) unit=`expr $i : 'ti\(.*\)'` - chr=153 - mknod ti$unit c $chr `unit2minor $unit` - chmod 600 ti$unit - ;; - -ttyx?|ttyy?|ttyz?) - case $i in - *0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;; - *4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;; - *8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;; - *c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;; - esac - case $i in - ttyy?) unit=$(($unit + 16));; - ttyz?) unit=$(($unit + 32));; - esac - mknod $i c 42 $unit - ;; - -cronyx) - mknod cronyx c 42 63 - ;; - -joy) - mknod joy0 c 51 0 root:operator - mknod joy1 c 51 1 root:operator - chmod 640 joy0 joy1 - ;; - -spigot) - mknod spigot c 11 0 - chmod 444 spigot - ;; - -ctx?) - unit=`expr $i : 'ctx\(.*\)'` - mknod ctx$unit c 40 `unit2minor $unit` - chmod 444 ctx$unit - ;; - -meteor?) - unit=`expr $i : 'meteor\(.*\)'` - mknod meteor$unit c 67 `unit2minor $unit` - chmod 444 meteor$unit - ;; - -bktr?) - unit=`expr $i : 'bktr\(.*\)'` - mknod bktr$unit c 92 `unit2minor $unit` - mknod tuner$unit c 92 `unit2minor $((16 + $unit))` - mknod vbi$unit c 92 `unit2minor $((32 + $unit))` - chmod 444 bktr$unit tuner$unit vbi$unit - ;; - -tun*) - units=`expr $i : 'tun\(.*\)$'` - unit=0 - while [ $unit -le $units ]; do - mknod tun$unit c 52 `unit2minor $unit` - unit=$(($unit + 1)) - done - ;; - -tap*) - units=`expr $i : 'tap\(.*\)$'` - unit=0 - while [ $unit -le $units ]; do - mknod tap$unit c 149 `unit2minor $unit` root:network - unit=$(($unit + 1)) - done - ;; - -sysmouse) - mknod sysmouse c 12 128 - mknod consolectl c 12 255 - ;; - -jogdial) - mknod jogdial c 160 0 - ;; - -snp?) - unit=`expr $i : 'snp\(.*\)'` - mknod snp$unit c 53 `unit2minor $unit` - ;; - -# dufault@hda.com: If I do much more work on other A-D boards -# then eventually we'll have an "ad" and "dio" interface and some of these -# "labpcaio" ones will be gone. -# labpcaio: D-A and A-D. -# labpcdio: Digital in and Digital out. -# -labpc*) - umask 7 - case $i in - labpcaio*) - name=labpcaio - unit=`expr $i : 'labpcaio\(.*\)'` - all="0 1 2 3 4 5 6 7" - offset=0 - ;; - labpcdio*) - name=labpcdio - unit=`expr $i : 'labpcdio\(.*\)'` - all="0 1 2 3" - offset=8 - ;; - *) - die 3 "Don't know LabPC type $i" - ;; - esac - if [ -z "${unit}" ]; then - unit=all - fi - case $unit in - 0|1|2|3|4|5|6|7) - mknod $name$unit c 66 $(($offset + $unit)) - ;; - all) - for i in $all - do - mknod $name$i c 66 $(($offset + $i)) - done - ;; - *) - echo "No such LabPC unit: $unit" - ;; - esac - umask 77 - ;; - -perfmon) - mknod perfmon c 2 32 root:kmem - chmod 640 perfmon - ;; - -ipl) - mknod ipl c 79 0 - mknod ipnat c 79 1 - mknod ipstate c 79 2 - mknod ipauth c 79 3 - ;; - -kbd*) - unit=`expr $i : 'kbd\(.*\)'` - chr=112 - mknod kbd$unit c $chr `unit2minor $unit` - ;; - -i4b) - mknod i4b c 60 0 - ;; - -i4bctl) - mknod i4bctl c 55 0 - ;; - -i4brbch*) - unit=`expr $i : 'i4brbch\(.*\)'` - mknod i4brbch$unit c 57 `unit2minor $unit` - ;; - -i4bteld*) - offset=64 - unit=`expr $i : 'i4bteld\(.*\)'` - mknod i4bteld$unit c 56 `unit2minor $(($offset + $unit))` - ;; - -i4btel*) - unit=`expr $i : 'i4btel\(.*\)'` - mknod i4btel$unit c 56 `unit2minor $unit` - ;; - -i4btrc*) - unit=`expr $i : 'i4btrc\(.*\)'` - mknod i4btrc$unit c 59 `unit2minor $unit` - ;; - -aac*) - unit=`expr $i : 'aac\(.*\)'` - mknod aac$unit c 150 `unit2minor $unit` - ln -fs aac$unit afa$unit - ln -fs aac$unit hpn$unit - ;; - -mlx*) - unit=`expr $i : 'mlx\(.*\)'` - mknod mlx$unit c 130 `unit2minor $unit` - ;; - -mly*) - unit=`expr $i : 'mlx\(.*\)'` - mknod mlx$unit c 158 `unit2minor $unit` - ;; - -amr*) - unit=`expr $i : 'amr\(.*\)'` - mknod amr$unit c 132 `unit2minor $unit` - ;; - -ciss*) - unit=`expr $i : 'ciss\(.*\)'` - mknod ciss$unit c 166 `unit2minor $unit` - ;; - -3dfx*) - unit=`expr $i : '3dfx\(.*\)'` - mknod 3dfx$unit c 107 `unit2minor $unit` - ln -sf 3dfx$unit 3dfx - ln -sf 3dfx$unit voodoo - ;; - -agpgart) - mknod agpgart c 148 0 - ;; - -twe*) - unit=`expr $i : 'twe\(.*\)'` - mknod twe$unit c 146 `unit2minor $unit` - ;; - -tw*) - unit=`expr $i : 'tw\(.*\)'` - mknod tw$unit c 19 `unit2minor $unit` root:operator - ;; - -cfs*) - unit=`expr $i : 'cfs\(.*\)'` - mknod cfs$unit c 93 $unit root:operator - ;; - -nsmb*) - unit=`expr $i : 'nsmb\(.*\)'` - mknod nsmb$unit c 144 $unit - ;; - -elan*) - mknod elan-mmcr c 100 0 # XXX local major - chmod 600 elan-mmcr - ;; - -crypto) - mknod crypto c 70 0 root:operator - chmod 666 crypto - ;; - -fwmem*) - unit=`expr $i : 'fwmem\(.*\)'` - mknod fwmem$unit c 127 $((1<<24 | $unit)) root:operator - chmod 660 fwmem$unit - ;; - -fw*) - unit=`expr $i : 'fw\(.*\)'` - mknod fw$unit c 127 $unit root:operator - chmod 660 fw$unit - ;; - -local) - umask 0 # XXX should be elsewhere - sh $0.local - umask 77 - ;; - -*) - echo $i - no such device name - ;; - -esac -done diff --git a/etc/MAKEDEV.local b/etc/MAKEDEV.local deleted file mode 100644 index 06cc074..0000000 --- a/etc/MAKEDEV.local +++ /dev/null @@ -1,50 +0,0 @@ -#!/bin/sh - -# -# Copyright (c) 1991 The Regents of the University of California. -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by the University of -# California, Berkeley and its contributors. -# 4. Neither the name of the University nor the names of its contributors -# may be used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# $FreeBSD$ -# @(#)MAKEDEV.local 5.1 (Berkeley) 3/22/91 -# - -# Local device MAKEDEV script. - -PATH=/sbin:/bin:/usr/bin -umask 77 -for i -do -case $i in - -*) - echo 'MAKEDEV.local: no such device.' - ;; -esac -done |