diff options
Diffstat (limited to 'etc')
| -rw-r--r-- | etc/etc.i386/install_notes | 36 |
1 files changed, 26 insertions, 10 deletions
diff --git a/etc/etc.i386/install_notes b/etc/etc.i386/install_notes index 0cc86f6..e8ac5b5 100644 --- a/etc/etc.i386/install_notes +++ b/etc/etc.i386/install_notes @@ -1,5 +1,6 @@ -FreeBSD 1.0 -INSTALLATION NOTES <2.00, 10 September 1993> + INSTALLATION NOTES + FreeBSD + Release 1.0 These notes have been prepared from those written originally for NetBSD 0.9. The conversion was done by someone who has had experience with @@ -137,40 +138,55 @@ allow you to run X and/or compile, but it's extremely slow.) Supported devices include: Standard floppy controllers + Standard hard disk controllers: MFM ESDI IDE RLL + SCSI hard disk controllers: - Adaptec AHA-1542{A,B,C}, -1742 [kcopy-ah-floppy] - Bustek 742 (EISA) Ultrastor 14f and 34f [kcopy-bt-floppy] + Adaptec 154x series * [kcopy-ah-floppy] + Adaptec 174x series + Buslogic 545S + Bustek 742 (EISA) [kcopy-bt-floppy] + DTC 3290 in 1542 emulation mode * + Ultrastor 14f and 34f + + * Your system can NOT have more than 16MB of memory with + these controllers. + Display Adaptors: MDA CGA VGA (and SVGA) HGC + Serial communications ports 8250 16450 16550A [4-port multi-serial cards - require kernel built with MULTI_PORT option] + [We do not support the Intel 82501 serial chip used + in some PC's at this time] + Ethernet controllers SMC/WD 8003, 8013, and equivalents (including the SMC "Elite" series) Novell NE1000, NE2000 3COM 3c503 ISOLAN ISOLink + Tape drives: QIC-02 format tape drives most SCSI tape/DAT drives [an early QIC-40 or QIC-80 tape driver exists, but is not yet incorporated into FreeBSD] + CD-ROM drives: - most SCSI CD-ROM drives - [an early MITSUMI non-SCSI CD-ROM driver exists, - but is not yet incorporated into FreeBSD] + Mitsumi CDROM drive with Mitsumi Controller + Most SCSI CD-ROM drives on a supported SCSI controller To be detected by the distributed kernels, the devices must be configured as follows: (Note: IRQ 9 is the same as IRQ 2 @@ -178,10 +194,10 @@ on ISA/EISA based machines) Device Name Port IRQ DRQ Misc ------ ---- ---- --- --- ---- -Floppy Cntlr. fdc0 0x3f0 6 2 +Floppy Cntlr. fd0 0x3f0 6 2 Std. Hard Disk Cntlr. - wdc0 0x1f0 14 + wd0 0x1f0 14 AHA-154x SCSI Cntlr. 0x330 11 5 [kcopy-ah-floppy] @@ -1036,4 +1052,4 @@ THANKS FOR USING THIS; that's what makes it all worthwhile. as they will end up in our personal mail spools. We will be happy to make other arrangements] -This is $Id: install_notes,v 1.8 1993/10/01 04:43:56 rgrimes Exp $ +This is $Id: install_notes,v 1.9 1993/10/01 19:22:43 rgrimes Exp $ |
