diff options
Diffstat (limited to 'etc/network.subr')
| -rw-r--r-- | etc/network.subr | 120 |
1 files changed, 60 insertions, 60 deletions
diff --git a/etc/network.subr b/etc/network.subr index 09ecc77..b14e7ca 100644 --- a/etc/network.subr +++ b/etc/network.subr @@ -1,6 +1,6 @@ #!/bin/sh - # -# $Id: rc.network,v 1.54 1999/08/19 21:15:16 brian Exp $ +# $Id: rc.network,v 1.55 1999/08/22 23:26:03 brian Exp $ # From: @(#)netstart 5.9 (Berkeley) 3/30/91 # Note that almost all the user-configurable behavior is no longer in @@ -14,25 +14,25 @@ network_pass1() { echo -n 'Doing initial network setup:' # Set the host name if it is not already set if [ -z "`hostname -s`" ] ; then - hostname $hostname + hostname ${hostname} echo -n ' hostname' fi # Set the domainname if we're using NIS - if [ -n "$nisdomainname" -a "x$nisdomainname" != "xNO" ] ; then - domainname $nisdomainname + if [ -n "${nisdomainname}" -a "${nisdomainname}" != "NO" ] ; then + domainname ${nisdomainname} echo -n ' domain' fi echo '.' # Initial ATM interface configuration - if [ "X${atm_enable}" = X"YES" -a -f /etc/rc.atm ]; then + if [ "${atm_enable}" = "YES" -a -f /etc/rc.atm ]; then . /etc/rc.atm atm_pass1 fi # ISDN subsystem startup - if [ "X${isdn_enable}" = X"YES" -a -f /etc/rc.isdn ]; then + if [ "${isdn_enable}" = "YES" -a -f /etc/rc.isdn ]; then . /etc/rc.isdn fi @@ -51,7 +51,7 @@ network_pass1() { done # Set up all the network interfaces, calling startup scripts if needed - if [ "x${network_interfaces}" = "xauto" ]; then + if [ "${network_interfaces}" = "auto" ]; then network_interfaces="`ifconfig -l`" fi for ifn in ${network_interfaces}; do @@ -64,7 +64,7 @@ network_pass1() { eval ifconfig_args=\$ifconfig_${ifn} if [ -n "${ifconfig_args}" ] ; then # See if we are using DHCP - if [ X"${ifconfig_args}" = X"DHCP" ]; then + if [ "${ifconfig_args}" = "XDHCP" ]; then ${dhcp_program} ${dhcp_flags} ${ifn} else ifconfig ${ifn} ${ifconfig_args} @@ -97,16 +97,16 @@ network_pass1() { done # Warm up user ppp if required, must happen before natd. - if [ "X$ppp_enable" = X"YES" ]; then + if [ "${ppp_enable}" = "YES" ]; then # Establish ppp mode. - if [ "X$ppp_mode" != X"ddial" -a "X$ppp_mode" != X"direct" \ - -a "X$ppp_mode" != X"dedicated" ]; then \ + if [ "${ppp_mode}" != "ddial" -a "${ppp_mode}" != "direct" \ + -a "${ppp_mode}" != "dedicated" ]; then \ ppp_mode="auto"; fi ppp_command="-${ppp_mode} "; # Switch on alias mode? - if [ "X$ppp_nat" = X"YES" ]; then + if [ "${ppp_nat}" = "YES" ]; then ppp_command="${ppp_command} -nat"; fi @@ -122,7 +122,7 @@ network_pass1() { firewall_in_kernel=0 fi - if [ $firewall_in_kernel = 0 -a "x$firewall_enable" = "xYES" ] ; then + if [ ${firewall_in_kernel} = 0 -a "${firewall_enable}" = "YES" ] ; then if kldload ipfw; then firewall_in_kernel=1 # module loaded successfully echo "Kernel firewall module loaded." @@ -132,16 +132,16 @@ network_pass1() { fi # Load the filters if required - if [ $firewall_in_kernel = 1 ]; then + if [ ${firewall_in_kernel} = 1 ]; then if [ -z "${firewall_script}" ] ; then firewall_script="/etc/rc.firewall" fi - if [ -f ${firewall_script} -a X"$firewall_enable" = X"YES" ]; then + if [ -f ${firewall_script} -a "${firewall_enable}" = "YES" ]; then . ${firewall_script} echo -n 'Firewall rules loaded, starting divert daemons:' # Network Address Translation daemon - if [ X"${natd_enable}" = X"YES" -a -n "${natd_interface}" ]; then + if [ "${natd_enable}" = "YES" -a -n "${natd_interface}" ]; then if echo ${natd_interface} | \ grep -q -E '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$'; then natd_ifarg="-a ${natd_interface}" @@ -153,7 +153,7 @@ network_pass1() { echo '.' else IPFW_DEFAULT=`ipfw l 65535` - if [ "$IPFW_DEFAULT" = "65535 deny ip from any to any" ]; then + if [ "${IPFW_DEFAULT}" = "65535 deny ip from any to any" ]; then echo -n "Warning: kernel has firewall functionality, " echo "but firewall rules are not enabled." echo " All ip services are disabled." @@ -168,13 +168,13 @@ network_pass1() { # Configure routing - if [ "x$defaultrouter" != "xNO" ] ; then + if [ "${defaultrouter}" != "NO" ] ; then static_routes="default ${static_routes}" route_default="default ${defaultrouter}" fi # Set up any static routes. This should be done before router discovery. - if [ "x${static_routes}" != "x" ]; then + if [ -n "${static_routes}" ]; then for i in ${static_routes}; do eval route_args=\$route_${i} route add ${route_args} @@ -182,78 +182,78 @@ network_pass1() { fi echo -n 'Additional routing options:' - if [ -n "$tcp_extensions" -a "x$tcp_extensions" != "xYES" ] ; then + if [ -n "${tcp_extensions}" -a "${tcp_extensions}" != "YES" ] ; then echo -n ' tcp extensions=NO' sysctl -w net.inet.tcp.rfc1323=0 >/dev/null fi - if [ -n "$log_in_vain" -a "x$log_in_vain" != "xNO" ] ; then + if [ -n "${log_in_vain}" -a "${log_in_vain}" != "NO" ] ; then echo -n ' log_in_vain=YES' sysctl -w net.inet.tcp.log_in_vain=1 >/dev/null sysctl -w net.inet.udp.log_in_vain=1 >/dev/null fi - if [ X"$icmp_bmcastecho" = X"YES" ]; then + if [ "${icmp_bmcastecho}" = "YES" ]; then echo -n ' broadcast ping responses=YES' sysctl -w net.inet.icmp.bmcastecho=1 >/dev/null fi - if [ "X$icmp_drop_redirect" = X"YES" ]; then + if [ "${icmp_drop_redirect}" = "YES" ]; then echo -n ' ignore ICMP redirect=YES' sysctl -w net.inet.icmp.drop_redirect=1 >/dev/null fi - if [ "X$icmp_log_redirect" = X"YES" ]; then + if [ "${icmp_log_redirect}" = "YES" ]; then echo -n ' log ICMP redirect=YES' sysctl -w net.inet.icmp.log_redirect=1 >/dev/null fi - if [ "X$gateway_enable" = X"YES" ]; then + if [ "${gateway_enable}" = "YES" ]; then echo -n ' IP gateway=YES' sysctl -w net.inet.ip.forwarding=1 >/dev/null fi - if [ "X$forward_sourceroute" = X"YES" ]; then + if [ "${forward_sourceroute}" = "YES" ]; then echo -n ' do source routing=YES' sysctl -w net.inet.ip.sourceroute=1 >/dev/null fi - if [ "X$accept_sourceroute" = X"YES" ]; then + if [ "${accept_sourceroute}" = "YES" ]; then echo -n ' accept source routing=YES' sysctl -w net.inet.ip.accept_sourceroute=1 >/dev/null fi - if [ "X$tcp_keepalive" = X"YES" ]; then + if [ "${tcp_keepalive}" = "YES" ]; then echo -n ' TCP keepalive=YES' sysctl -w net.inet.tcp.always_keepalive=1 >/dev/null fi - if [ "X$ipxgateway_enable" = X"YES" ]; then + if [ "${ipxgateway_enable}" = "YES" ]; then echo -n ' IPX gateway=YES' sysctl -w net.ipx.ipx.ipxforwarding=1 >/dev/null fi - if [ "X$arpproxy_all" = X"YES" ]; then + if [ "${arpproxy_all}" = "YES" ]; then echo -n ' ARP proxyall=YES' sysctl -w net.link.ether.inet.proxyall=1 >/dev/null fi echo '.' echo -n 'routing daemons:' - if [ "X$router_enable" = X"YES" ]; then + if [ "${router_enable}" = "YES" ]; then echo -n " ${router}"; ${router} ${router_flags} fi - if [ "X$ipxrouted_enable" = X"YES" ]; then + if [ "${ipxrouted_enable}" = "YES" ]; then echo -n ' IPXrouted' IPXrouted ${ipxrouted_flags} > /dev/null 2>&1 fi - if [ "X${mrouted_enable}" = X"YES" ]; then + if [ "${mrouted_enable}" = "YES" ]; then echo -n ' mrouted'; mrouted ${mrouted_flags} fi - if [ "X$rarpd_enable" = X"YES" ]; then + if [ "${rarpd_enable}" = "YES" ]; then echo -n ' rarpd'; rarpd ${rarpd_flags} fi echo '.' @@ -262,54 +262,54 @@ network_pass1() { network_pass2() { echo -n 'Doing additional network setup:' - if [ "X${named_enable}" = X"YES" ]; then + if [ "${named_enable}" = "YES" ]; then echo -n ' named'; ${named_program-"named"} ${named_flags} fi - if [ "X${ntpdate_enable}" = X"YES" ]; then + if [ "${ntpdate_enable}" = "YES" ]; then echo -n ' ntpdate'; ${ntpdate_program} ${ntpdate_flags} >/dev/null 2>&1 fi - if [ "X${xntpd_enable}" = X"YES" ]; then + if [ "${xntpd_enable}" = "YES" ]; then echo -n ' xntpd'; ${xntpd_program} ${xntpd_flags} fi - if [ "X${timed_enable}" = X"YES" ]; then + if [ "${timed_enable}" = "YES" ]; then echo -n ' timed'; timed ${timed_flags} fi - if [ "X${portmap_enable}" = X"YES" ]; then + if [ "${portmap_enable}" = "YES" ]; then echo -n ' portmap'; ${portmap_program} ${portmap_flags} fi # Start ypserv if we're an NIS server. # Run rpc.ypxfrd and rpc.yppasswdd only on the NIS master server. - if [ "X${nis_server_enable}" = X"YES" ]; then + if [ "${nis_server_enable}" = "YES" ]; then echo -n ' ypserv'; ypserv ${nis_server_flags} - if [ "X${nis_ypxfrd_enable}" = X"YES" ]; then + if [ "${nis_ypxfrd_enable}" = "YES" ]; then echo -n ' rpc.ypxfrd'; rpc.ypxfrd ${nis_ypxfrd_flags} fi - if [ "X${nis_yppasswdd_enable}" = X"YES" ]; then + if [ "${nis_yppasswdd_enable}" = "YES" ]; then echo -n ' rpc.yppasswdd'; rpc.yppasswdd ${nis_yppasswdd_flags} fi fi # Start ypbind if we're an NIS client - if [ "X${nis_client_enable}" = X"YES" ]; then + if [ "${nis_client_enable}" = "YES" ]; then echo -n ' ypbind'; ypbind ${nis_client_flags} - if [ "X${nis_ypset_enable}" = X"YES" ]; then + if [ "${nis_ypset_enable}" = "YES" ]; then echo -n ' ypset'; ypset ${nis_ypset_flags} fi fi # Start keyserv if we are running Secure RPC - if [ "X${keyserv_enable}" = X"YES" ]; then + if [ "${keyserv_enable}" = "YES" ]; then echo -n ' keyserv'; keyserv ${keyserv_flags} fi # Start ypupdated if we are running Secure RPC and we are NIS master - if [ "X$rpc_ypupdated_enable" = X"YES" ]; then + if [ "${rpc_ypupdated_enable}" = "YES" ]; then echo -n ' rpc.ypupdated'; rpc.ypupdated fi @@ -325,40 +325,40 @@ network_pass2() { network_pass3() { echo -n 'Starting final network daemons:' - if [ "X${nfs_server_enable}" = X"YES" -a -r /etc/exports ]; then + if [ "${nfs_server_enable}" = "YES" -a -r /etc/exports ]; then echo -n ' mountd' - if [ "X${weak_mountd_authentication}" = X"YES" ]; then + if [ "${weak_mountd_authentication}" = "YES" ]; then mountd_flags="-n" fi mountd ${mountd_flags} - if [ "X${nfs_reserved_port_only}" = X"YES" ]; then + if [ "${nfs_reserved_port_only}" = "YES" ]; then echo -n ' NFS on reserved port only=YES' sysctl -w vfs.nfs.nfs_privport=1 >/dev/null fi echo -n ' nfsd'; nfsd ${nfs_server_flags} - if [ "X$rpc_lockd_enable" = X"YES" ]; then + if [ "${rpc_lockd_enable}" = "YES" ]; then echo -n ' rpc.lockd'; rpc.lockd fi - if [ "X$rpc_statd_enable" = X"YES" ]; then + if [ "${rpc_statd_enable}" = "YES" ]; then echo -n ' rpc.statd'; rpc.statd fi fi - if [ "X${nfs_client_enable}" = X"YES" ]; then + if [ "${nfs_client_enable}" = "YES" ]; then echo -n ' nfsiod'; nfsiod ${nfs_client_flags} - if [ "X${nfs_access_cache}" != X ]; then + if [ "${nfs_access_cache}" != "X" ]; then echo -n " NFS access cache time=${nfs_access_cache}" sysctl -w vfs.nfs.access_cache_timeout=${nfs_access_cache} \ >/dev/null fi fi - if [ "X${amd_enable}" = X"YES" ]; then + if [ "${amd_enable}" = "YES" ]; then echo -n ' amd' - if [ "X${amd_map_program}" != X"NO" ]; then + if [ "${amd_map_program}" != "NO" ]; then amd_flags="${amd_flags} `eval ${amd_map_program}`" fi - if [ -n "$amd_flags" ] + if [ -n "${amd_flags}" ] then amd -p ${amd_flags} > /var/run/amd.pid 2> /dev/null else @@ -366,20 +366,20 @@ network_pass3() { fi fi - if [ "X${rwhod_enable}" = X"YES" ]; then + if [ "${rwhod_enable}" = "YES" ]; then echo -n ' rwhod'; rwhod ${rwhod_flags} fi # Kerberos runs ONLY on the Kerberos server machine - if [ "X${kerberos_server_enable}" = X"YES" ]; then - if [ "X${kerberos_stash}" = "XYES" ]; then + if [ "${kerberos_server_enable}" = "YES" ]; then + if [ "${kerberos_stash}" = "YES" ]; then stash_flag=-n else stash_flag= fi echo -n ' kerberos'; \ kerberos ${stash_flag} >> /var/log/kerberos.log & - if [ "X${kadmind_server_enable}" = "XYES" ]; then + if [ "${kadmind_server_enable}" = "YES" ]; then echo -n ' kadmind'; \ (sleep 20; kadmind ${stash_flag} >/dev/null 2>&1 &) & fi |
