1 files changed, 0 insertions, 444 deletions
diff --git a/etc/etc.i386/inst2.rc b/etc/etc.i386/inst2.rc
deleted file mode 100644
index e439eb1..0000000
--- a/etc/etc.i386/inst2.rc
+++ /dev/null
@@ -1,444 +0,0 @@
-#	$Id: inst2.rc,v 1.4 1994/06/15 19:23:33 jkh Exp $
-#
-
-stty status '^T'
-trap : 2
-trap : 3
-PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/distbin; export PATH
-
-echo
-echo
-if [ -e /fastboot ]
-then
-	echo Fast boot ... skipping disk checks
-else
-	echo Automatic reboot in progress...
-	fsck -p
-	case $? in
-	0)
-		;;
-	2)
-		exit 1
-		;;
-	4)
-		echo; echo README README README README README README README
-		echo
-		echo "NOTE: The above errors are expected if this is the"
-		echo "first time you have booted from the hard disk after"
-		echo "completing the floppy install"; echo
-		echo "Automatic file system check changed the root file system"
-		echo "The system must halt for these corrections to take effect"
-		echo
-		reboot
-		echo "reboot failed... help!"
-		exit 1
-		;;
-	8)
-		echo "Automatic file system check failed... help!"
-		exit 1
-		;;
-	12)
-		echo "Reboot interrupted"
-		exit 1
-		;;
-	130)
-		exit 1
-		;;
-	*)
-		echo "Unknown error in reboot"
-		exit 1
-		;;
-	esac
-fi
-
-trap 2
-trap "echo 'Reboot interrupted'; exit 1" 3
-umount -a >/dev/null 2>&1
-mount -a -t nonfs
-rm -f /fastboot
-(cd /var/run && { rm -rf -- *; cp /dev/null utmp; chmod 644 utmp; })
-
-OPSYSTEM=FreeBSD
-# Sure wish we had uname at this point!
-RELEASE="2.0.0 (Development)"
-echo "${OPSYSTEM} Base System Release ${RELEASE}"
-echo ""
-echo "Congratulations, you've got ${OPSYSTEM} on the hard disk!"
-echo
-echo "Press the return key for more installation instructions"
-read junkit
-echo
-echo "To finish installation:"
-echo "Pick a temporary directory by running set_tmp_dir.  Make sure it's"
-echo "in a place with lots of space, probably under /usr."
-echo "Then, load the remaining distribution files into that temporary"
-echo "directory by issuing one of the following commands:"
-echo
-echo "	load_dos	load_fd		load_qic_tape	load_scsi_tape"
-echo
-echo "or by fetching the files with ftp (see the installation notes for"
-echo "information on how to do that)."
-echo
-echo "Once this is complete, extract the distribution files by issuing the"
-echo "command 'extract <distribution>'  where <distribution> is the base name"
-echo "of the distribution files, e.g. 'base10'."
-echo
-echo "Once all of the filesets you wish to install have been extracted,"
-echo "enter the command 'configure' to finish setting up the system"
-echo " "
-echo "If you wish to uninstall ${OPSYSTEM}, delete the partition by using the"
-echo "DOS 5 FDISK program. If installed on the entire drive, use the FDISK/MBR"
-echo "to remove the ${OPSYSTEM} bootstrap from the drive."
-echo 'erase ^H, kill ^U, intr ^C'
-stty newcrt erase ^H intr ^C kill ^U
-umask 0
-exit 1
-
-set_tmp_dir()
-{
-	def_tmp_dir=`pwd`
-	[ "$def_tmp_dir" = "/" ] && def_tmp_dir=/usr/distrib
-	echo -n "Copy files to which directory? [${def_tmp_dir}] "
-	read tmp_dir
-	[ ! "$tmp_dir" ] && tmp_dir=$def_tmp_dir
-	if [ ! -d "$tmp_dir" ]; then
-		/bin/rm -rf $tmp_dir
-		mkdir -p $tmp_dir
-	fi
-	echo
-}
-tmp_dir()
-{
-	if [ "$tmp_dir" = "" ]; then
-		set_tmp_dir
-	fi
-	cd $tmp_dir
-}
-load_fd()
-{
-	tmp_dir
-	drive=
-	altdrive=
-	subdir=
-	while [ -z "$drive" ]; do
-		echo -n "Read from which drive (or ? for help)? [c] "
-		read answer junk
-		case "${answer:-c}" in
-		a*b|A*B)	
-			drive=A; altdrive=B
-			;;
-		b*a|B*A)	
-			drive=B; altdrive=A
-			;;
-		a*|A*)	
-			drive=A; altdrive=A
-			;;
-		b*|B*)	
-			drive=B; altdrive=B
-			;;
-		c*|C*)
-			while read data; do
-				msdos_device=`expr X"$data" : 'X[ 	]*\([^ 	]*\)[^M]*pcfs'`
-				msdos_dir=`expr X"$data" : 'X[ 	]*[^ 	]*[ 	]*\([^ 	]*\)'`
-				[ "${msdos_device}" ] && break
-			done </etc/fstab
-			if [ ! "$msdos_device" ]; then
-				echo
-				echo	"Cannot find MS-DOS in filesystem table"
-				continue
-			fi
-			drive=C; altdrive=C
-			while :; do
-				echo
-				echo -n "Read from which MS-DOS drive C: directory? [/] "
-				read resp junk
-				newdir=$(echo "${resp:-/}" | \
-				awk '{ sub(/^[Cc]*:*/, ""); gsub(/\\/, "/"); gsub(/^\/*/, ""); gsub(/\/*$/, ""); print $0 }')
-				if [ -d ${msdos_dir}/${newdir} ]; then
-					subdir=$newdir
-					break
-				else
-					echo "C:/${newdir}: No such directory"
-				fi
-			done
-			;;
-		q*|Q*)	
-			drive=q
-			;;
-		\?*)	
-			echo
-			echo "Enter:		To:"
-			echo "------		---"
-			echo "  a		Read from floppy drive A:"
-			echo "  b		Read from floppy drive B:"
-			echo "  c		Read from MS-DOS hard drive C:"
-			echo "  ab		Alternate between A: and B:, starting with A:"
-			echo "  ba		Alternate between A: and B:, starting with B:"
-			echo "  q		Quit"
-			echo
-			;;
-		esac
-	done
-	verbose=-v
-	interactive=-i
-	if [ "$drive" = "C" ]; then
-		dir=${msdos_dir}
-	elif [ "$drive" != "q" ]; then
-		dir=/tmp/floppy
-		[ -d $dir ] && umount $dir >/dev/null 2>&1
-		[ -f $dir ] && rm -f $dir
-		mkdir -p $dir
-	fi
-	while [ "$drive" != "q" ]
-	do
-		device=/dev/fd0
-		[ "$drive" = "B" ] && device=/dev/fd1
-		[ "$drive" = "C" ] && device=${msdos_device}
-		echo; 
-		if [ "$drive" != "C" ]; then
-			echo	"Insert floppy in drive $drive:, then press RETURN to copy files,"
-			echo -n "or enter option (? for help): "
-		else
-			echo -n "Press RETURN to copy files, or enter option (? for help): "
-		fi
-		read answer junk
-		case "${answer:-g}" in
-		c*|C*)
-			if [ "$drive" != "C" ]; then
-				echo "Cannot change directory: not reading from MS-DOS drive C:"
-			else
-				echo
-				echo -n "Read from which MS-DOS drive C: directory? [/${subdir}] "
-				read resp junk
-				[ ! "$resp" ] && resp="/$subdir"
-				absolute=`expr X"$resp" : 'X[Cc]*:*\([/\]\)'`
-				subsub=$(echo "${resp}" | \
-				awk '{ sub(/^[Cc]*:*/, ""); gsub(/\\/, "/"); gsub(/^\/*/, ""); gsub(/\/*$/, ""); print $0 }')
-				if [ "$absolute" -o ! "$subdir" ]; then
-					newsub=$subsub
-				else
-					newsub=$subdir/$subsub
-				fi
-				if [ -d ${dir}/${newsub} ]; then
-					subdir=$newsub
-				else
-					echo "C:/${newsub}: No such directory"
-				fi
-			fi
-			;;
-		g*|G*)	
-			sync
-			if [ "$drive" = "C" ]; then
-				[ "$verbose" ] &&
-				{ echo; echo "Copying files from MS-DOS C:/${subdir}"; }
-				cp ${msdos_dir}/${subdir}/* .
-				sync
-			elif mount -t pcfs $verbose $device $dir; then 
-				[ "$verbose" ] && 
-				{ echo; echo "Copying files to disk..."; }
-				cp $interactive $dir/* .
-				sync
-				umount $dir
-				tmp=$drive; drive=$altdrive; altdrive=$tmp
-			fi
-			;;
-		i*|I*)	
-			tmp=$interactive; interactive=; [ -z "$tmp" ] && interactive=-i
-			tmp=on; [ -z "$interactive" ] && tmp=off
-			echo "interactive mode is $tmp"
-			;;
-		l*|L*)
-			sync
-			[ "$verbose" ] && echo "Directory of ${drive}:/${subdir}"
-			if [ "$drive" = "C" ]; then
-				ls -l $dir/${subdir}
-			else
-				umount $dir >/dev/null 2>&1
-				if mount -t pcfs $device $dir; then 
-					ls -l $dir/${subdir}
-					umount $dir
-				fi
-			fi
-			;;
-		o*|O*)	
-			tmp=$drive; drive=$altdrive; altdrive=$tmp
-			;;
-		q*|Q*)	
-			drive=q
-			;;
-		s*|S*)	
-			echo; echo -n "tmp_dir is set to $tmp_dir"
-			[ "$tmp_dir" != "`pwd`" ] && echo -n " (physically `pwd`)"
-			echo; echo "Free space in tmp_dir:"
-			df -k .
-			echo -n "Reading from drive $drive:"
-			[ "$drive" != "$altdrive" ] && echo -n " and drive $altdrive:"
-			echo
-			tmp=on; [ -z "$verbose" ] && tmp=off
-			echo "Verbose mode is $tmp"
-			tmp=on; [ -z "$interactive" ] && tmp=off
-			echo "Interactive mode is $tmp"
-			;;
-		v*|V*)	
-			tmp=$verbose; verbose=; [ -z "$tmp" ] && verbose=-v
-			tmp=on; [ -z "$verbose" ] && tmp=off
-			echo "verbose mode is $tmp"
-			;;
-		\?)	
-			echo
-			echo "Enter:		To:"
-			echo "-----		---"
-			echo "(just RETURN)	Copy files from ${drive}:/${subdir} to $tmp_dir"
-			echo "  c		Change directory of MS-DOS drive C:"
-			echo "  i		Toggle interactive mode (cp -i)"
-			echo "  l		List directory of current drive"
-			echo "  o		Read from alternate floppy drive"
-			echo "  q		Quit"
-			echo "  s		Show status"
-			echo "  v		Toggle verbose mode"
-			echo 
-			;;
-		esac
-	done
-	echo "Working directory: `pwd`"
-	unset verbose answer drive altdrive device dir subdir tmp interactive
-}
-load_dos
-{
-	load_fd
-}
-load_qic_tape()
-{
-	tmp_dir
-	echo -n "Insert tape into QIC tape drive and hit return to continue: "
-	read foo
-	tar xvf /dev/rwt0
-}
-load_scsi_tape()
-{
-	tmp_dir
-	echo -n "Insert tape into SCSI tape drive and hit return to continue: "
-	read foo
-	tar xvf /dev/nrst0
-}
-extract()
-{
-	tmp_dir
-	echo -n "Would you like to be verbose about this? [n] "
-	read verbose
-	case $verbose in
-	y*|Y*)
-		tarverbose=--verbose
-		;;
-	*)
-		tarverbose=
-		;;
-	esac
-	#XXX ugly hack to eliminate busy files, copy them to /tmp and use them
-	#from there...
-	cp -p /bin/cat /usr/bin/gunzip /usr/bin/tar /tmp
-	
-	for i in $*; do
-		/tmp/cat "$i"* | 
-		/tmp/gunzip |
-		(cd / ; /tmp/tar --extract --file - --preserve-permissions ${tarverbose} )
-	done
-	rm -f /tmp/cat /tmp/gunzip /tmp/tar
-	sync
-}
-configure()
-{
-	echo	"You will now be prompted for information about this"
-	echo	"machine.  If you hit return, the default answer (in"
-	echo	"brackets) will be used."
-
-	echo
-	echo -n "What is this machine's hostname? [unknown.host.domain] "
-	read hname
-
-	if [ "$hname" = "" ]; then
-		hname=unknown.host.domain
-	fi
-	echo $hname > /etc/myname
-	proto_domain=`echo $hname | sed -e 's/[^.]*\.//'`
-	
-	echo
-	echo	"What domain is this machine in (this is NOT its YP"
-	echo -n "domain name)? [$proto_domain] "
-	read dname
-
-	if [ "$dname" = "" ]; then
-		dname=$proto_domain
-	fi
-
-	echo
-	echo -n "Does this machine have an ethernet interface? [y] "
-	read resp
-	case "$resp" in
-	n*)
-		;;
-	*)
-		intf=
-		while [ "$intf" = "" ]; do
-			echo -n "What is the primary interface name (i.e. ed0, etc.)? "
-			read intf
-		done
-		echo -n "What is the hostname for this interface? [$hname] "
-		read ifname
-		if [ "$ifname" = "" ]; then
-			ifname=$hname
-		fi
-		ifaddr=
-		while [ "$ifaddr" = "" ]; do
-			echo -n "What is the IP address associated with this interface? "
-			read ifaddr
-		done
-		echo "$ifaddr    $ifname `echo $ifname | sed -e s/\.$dname//`" \
-			>> /etc/hosts
-
-		echo -n "Does this interface have a special netmask? [n] "
-		read resp
-		case "$resp" in
-		y*)
-			echo -n "What is the netmask? [0xffffff00] "
-			read ifnetmask
-			if [ "$ifnetmask" = "" ]; then
-				ifnetmask=0xffffff00
-			fi
-			;;
-		*)
-			ifnetmask=
-			;;
-		esac
-		
-		echo -n "Does this interface need additional flags? [n] "
-		read resp
-		case "$resp" in
-		y*)
-			echo -n "What flags? [llc0] "
-			read ifflags
-			if [ "$ifflags" = "" ]; then
-				ifflags=llc0
-			fi
-			;;
-		*)
-			ifflags=
-			;;
-		esac
-		
-		echo "inet $ifname netmask $ifnetmask $ifflags" > /etc/hostname.$intf
-
-		echo	""
-		echo	"WARNING: if you have any more ethernet interfaces, you"
-		echo	"will have to configure them by hand.  Read the comments"
-		echo	"in /etc/netstart to learn how to do this"
-		;;
-	esac
-
-	sync
-
-	echo
-	echo	"OK.  You should be completely set up now."
-	echo	"You should now reboot your machine by issuing the 'reboot' command"
-	echo	"after removing anything that happens to be in your floppy drive."
-}