diff options
Diffstat (limited to 'etc/etc.i386/MAKEDEV')
-rw-r--r-- | etc/etc.i386/MAKEDEV | 1442 |
1 files changed, 0 insertions, 1442 deletions
diff --git a/etc/etc.i386/MAKEDEV b/etc/etc.i386/MAKEDEV deleted file mode 100644 index 5e26cc1..0000000 --- a/etc/etc.i386/MAKEDEV +++ /dev/null @@ -1,1442 +0,0 @@ -#!/bin/sh - -# -# Copyright (c) 1990 The Regents of the University of California. -# All rights reserved. -# -# Written and contributed by W. Jolitz 12/90 -# -# Redistribution and use in source and binary forms are permitted provided -# that: (1) source distributions retain this entire copyright notice and -# comment, and (2) distributions including binaries display the following -# acknowledgement: ``This product includes software developed by the -# University of California, Berkeley and its contributors'' in the -# documentation or other materials provided with the distribution and in -# all advertising materials mentioning features or use of this software. -# Neither the name of the University nor the names of its contributors may -# be used to endorse or promote products derived from this software without -# specific prior written permission. -# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED -# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. -# -# @(#)MAKEDEV 5.2 (Berkeley) 6/22/90 -# -# Device "make" file. Valid arguments: -# all makes all known devices, standard number of units (or close) -# std standard devices -# jail suitable for a jail(8) -# local configuration specific devices -# mach-4 mach4&lites+devices for Mach's XFree86 distribution -# (see http://www.cs.hut.fi/lites.html for more info on LITES) -# -# Tapes: -# wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape -# sa* SCSI Sequential Access Devices -# ft* QIC-40/QIC-80 3M cartridge tape (interfaced -# via the floppy disk controller) -# -# Disks: -# acd* ATAPI CD-ROM disks -# amrd* AMI MegaRAID -# cd* SCSI CD-ROM disks -# da* SCSI Direct Access Devices -# fd* floppy disk drives (3 1/2", 5 1/4") -# fla* M-Systems DiskOnChip -# ida* Compaq Smart-2 RAID -# matcd* Matsushita (Panasonic) CD-ROM disks -# mcd* Mitsumi CD-ROM disks -# md* Memory (or malloc) disk -# mlxd* Mylex DAC960 RAID -# scd* Sony CD-ROM disks -# sd* SCSI disk, antiquated, use da* instead -# vn* vnode disks -# wd* "Winchester" disk drives (ST506,IDE,ESDI,RLL,...) -# wfd* IDE floppy disk drives (LS-120) -# -# Console ports: -# vty* virtual console devices for syscons/pcvt/codrv -# -# Pointing devices: -# mse* Logitech and ATI Inport bus mouse -# psm* PS/2 mouse -# sysmouse Mousesystems mouse emulator for syscons -# -# Time devices: -# refclock-* serial ports used by xntpd parse refclocks -# -# Terminal ports: -# tty* general purpose serial ports -# cua* dialout serial ports -# ttyA* Specialix SI/XIO dialin ports ('*' = number of devices) -# cuaA* Specialix SI/XIO dialout ports -# ttyD* Digiboard - 16 dialin ports -# cuaD* Digiboard - 16 dialout ports -# ttyR* Rocketport dialin ports -# cuaR* Rocketport dialout ports -# -# Pseudo terminals: -# pty* set of 32 master and slave pseudo terminals -# vty* virtual terminals using syscons/pcvt/codrv console -# -# Parallel port: -# lpt* Printer -# ppi* Parallel port i/o -# pps* Pulse per second timing interface -# -# I2C and SMBus: -# iic* I2C devices -# smb* SMBUS devices -# -# USB devices: -# usb* USB bus control device -# ums* mouse -# ulpt* printer -# ugen* generic USB device -# -# SCSI devices (other than CD-ROM, tape and disk): -# ch* SCSI Media-Changer (juke box) driver -# ssc The ``super scsi'' device -# worm* WORM driver -# pt* Processor Type (HP scanner, as one example) -# pass* CAM Passthrough device -# -# PC-CARD (previously called PCMCIA) support -# card* PC-CARD slots -# -# ISDN devices: -# i4b isdnd call control device -# i4bctl debugging control device -# i4btrc* trace data interface(s), one per passive card -# i4btel* telephony interface(s) -# i4bteld* telephony dialout interface(s) -# i4brbch* raw b channel access device(s) -# -# Special purpose devices: -# apm Advanced Power Management BIOS -# apmctl APM BIOS control device -# bpf* packet filter -# speaker pc speaker -# tw* xten power controller -# snd* various sound cards -# pcaudio PCM audio driver -# socksys iBCS2 socket system driver -# vat VAT compatibility audio driver (requires snd*) -# gsc Genius GS-4500 hand scanner -# joy pc joystick -# tun* Tunneling IP device -# snp* tty snoop devices -# spigot Video Spigot video acquisition card -# ctx* Cortex-I video acquisition card -# meteor* Matrox Meteor video acquisition card (pci) -# bktr* Bt848 based video acquisition card (pci) -# labpc* National Instrument's Lab-PC and LAB-PC+ -# perfmon CPU performance-monitoring counters -# pci PCI configuration-space access from user mode -# kbd keyboard devices -# -# $FreeBSD$ -# - -PATH=/sbin:/bin/:/usr/bin:/usr/sbin:$PATH -umask 77 - -# Usage: die exitcode msg -die() { - echo $2 - exit $1 -} - -# Convert integer to partition name -dkitop() { - local p - - case $1 in - 0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;; - *) p="?";; - esac - echo $p -} - -# Convert integer to slice name -dkitos() { - local s - - case $1 in - 0) s="";; - 1) s="";; - *) s=s$(($1-1));; - esac - echo $s -} - -# Convert disk (type, unit, slice, partition) to minor number -dkminor() -{ - echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4)) -} - -# Override mknod(2) to add extra handling to it. -mknod() { - rm -f "$1" || exit 1 - /sbin/mknod "$@" || die 2 "/sbin/mknod $@ failed" - chown root:wheel "$1" || exit 1 -} - -# Convert tape (ctrl, unit, mode, access) to minor number -saminor() -{ - echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4)) -} - -# Convert the last character of a tty name to a minor number. -ttyminor() -{ - case $unit in - [0-9]) m=$unit;; - a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;; - h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;; - o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;; - v) m=31;; - *) m="?";; - esac - echo $m -} - -# Raw partition for disks -dkrawpart=2 - -# Compatibility slice for disks -dkcompatslice=0 - -# Raw slice for disks -dkrawslice=1 - -# Standard umasks -disk_umask=037 # allow group operator to read disks -tape_umask=017 # allow group operator to read/write tapes - -for i in $*; do -case $i in - -all) - sh MAKEDEV std # standard - sh MAKEDEV fd0 fd1 # bdev, floppy disk - sh MAKEDEV da0 da1 da2 da3 # bdev, SCSI disk - sh MAKEDEV ad0 ad1 ad2 ad3 # bdev, ATA disk - sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices - sh MAKEDEV wd0 wd1 wd2 wd3 # bdev, OLD disk - sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs - sh MAKEDEV vn0 # bdev, virtual disk - sh MAKEDEV cd0 matcd0 mcd0 scd0 # bdev, cdrom - sh MAKEDEV ft0 sa0 wt0 # bdev, tape - sh MAKEDEV vty12 # cdev, virtual tty - sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty - sh MAKEDEV pty0 # cdev, pseudo tty - sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty - sh MAKEDEV kbd0 # cdev, keyboard - sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse - sh MAKEDEV pcaudio speaker # cdev, noise - sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer - sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port - sh MAKEDEV iic0 iic1 # cdev, I2C device - sh MAKEDEV smb0 smb1 # cdev, SMBus device - sh MAKEDEV usb usb0 ums0 ulpt0 ugen0 # cdev, USB devices - sh MAKEDEV bpf0 tun0 # cdev, network - sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous - sh MAKEDEV apm apmctl card0 card1 card2 card3 # cdev, laptop - sh MAKEDEV pass4 xpt2 # cdev, CAM - sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN - sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN - sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN - ;; - -std) - mknod console c 0 0; chmod 600 console - mknod drum c 4 0; chmod 640 drum; chgrp kmem drum - mknod kmem c 2 1; chmod 640 kmem; chgrp kmem kmem - mknod mem c 2 0; chmod 640 mem; chgrp kmem mem - mknod null c 2 2; chmod 666 null - mknod random c 2 3; chmod 644 random - mknod urandom c 2 4; chmod 644 urandom - mknod zero c 2 12; chmod 666 zero - mknod io c 2 14; chmod 600 io - mknod tty c 1 0; chmod 666 tty - mknod klog c 7 0; chmod 600 klog - mknod stdin c 22 0; chmod 666 stdin - mknod stdout c 22 1; chmod 666 stdout - mknod stderr c 22 2; chmod 666 stderr - mknod pci c 78 0; chmod 644 pci - mkdir -p fd - (cd fd && eval `echo "" | awk ' BEGIN { \ - for (i = 0; i < 64; i++) \ - printf("mknod %d c 22 %d;", i, i)}'`) - chown -R root:wheel fd - chmod 555 fd - chmod 666 fd/* - ;; - -jail) - sh MAKEDEV std pty0 - rm mem kmem drum pci io klog # for security - ln -sf null mem # for libkvm (ab)users - ln -sf null kmem # --//-- - ln -sf null drum # --//-- - ;; - -mach-4) - mknod iopl c 22 0 - mknod kbd c 23 0 - mknod mouse c 24 0 - mknod time c 25 0 - mknod timezone c 26 0 - ;; - -# Create device files for new Archive/Wangtek QIC-02 tape driver (vak) -wt*) - umask $tape_umask - u=`expr $i : '..\(.*\)'` - if [ -z "${u}" ]; then u=0; fi - mknod rwt${u} c 10 `expr 0 + $u` # default density, 512b blocks - mknod nrwt${u} c 10 `expr 4 + $u` -# mknod rWt${u} c 10 `expr 64 + $u` # default density, 1024b blocks -# mknod nrWt${u} c 10 `expr 68 + $u` - mknod rwt${u}b c 10 `expr 16 + $u` # 60 megabytes - mknod nrwt${u}b c 10 `expr 20 + $u` - mknod rwt${u}c c 10 `expr 24 + $u` # 120 megabytes - mknod nrwt${u}c c 10 `expr 28 + $u` - mknod rwt${u}d c 10 `expr 32 + $u` # 150 megabytes - mknod nrwt${u}d c 10 `expr 36 + $u` -# mknod rwt${u}e c 10 `expr 40 + $u` # 300 megabytes? -# mknod nrwt${u}e c 10 `expr 44 + $u` -# mknod rwt${u}f c 10 `expr 48 + $u` # 600 megabytes? -# mknod nrwt${u}f c 10 `expr 52 + $u` - chgrp operator r[Ww]t$u nr[Ww]t$u r[Ww]t$u[a-f] nr[Ww]t$u[a-f] - umask 77 - ;; - -# Individual slices. -ad*s*|afd*s*|amrd*s*|da*s*|fla*s*|ida*s*|md*s*|mlxd*s*|sd*s*|vn*s*|wd*s*|wfd*s*) - umask $disk_umask - case $i in - ad*s*) name=ad; blk=30; chr=116;; - afd*s*) name=afd; blk=32; chr=118;; - amrd*s*) name=amrd; blk=35; chr=133;; - da*s*) name=da; blk=4; chr=13;; - fla*s*) name=fla; blk=28; chr=102;; - ida*s*) name=ida; blk=29; chr=109;; - md*s*) name=md; blk=22; chr=95;; - mlxd*s*) name=mlxd; blk=27; chr=131;; - sd*s*) name=sd; blk=4; chr=13;; - vn*s*) name=vn; blk=15; chr=43;; - wd*s*) name=wd; blk=0; chr=3;; - wfd*s*) name=wfd; blk=1; chr=87;; - esac - case $i in - amrd*s*|mlxd*s*) - unit=`expr $i : '....\([0-9]*\)s'` - slice=`expr $i : '....[0-9]*s\([0-9]*\)'` - part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'` - ;; - afd*s*|fla*s*|ida*s*|wfd*s*) - unit=`expr $i : '...\([0-9]*\)s'` - slice=`expr $i : '...[0-9]*s\([0-9]*\)'` - part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'` - ;; - *) - unit=`expr $i : '..\([0-9]*\)s'` - slice=`expr $i : '..[0-9]*s\([0-9]*\)'` - part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'` - ;; - esac - case $unit in - [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1]) - case $slice in - [0-9]|[1-2][0-9]|30) - oldslice=$slice - slice=$(($slice+1)) - slicename=`dkitos $slice` - minor=`dkminor 0 $unit $slice $dkrawpart` - mknod $name$unit$slicename b $blk $minor - mknod r$name$unit$slicename c $chr $minor - case $part in - [a-h]) - case $oldslice in - 0) slice=$oldslice ;; - esac - for part in 0 1 2 3 4 5 6 7 - do - minor=`dkminor 0 $unit $slice $part` - partname=`dkitop $part` - mknod $name$unit$slicename$partname \ - b $blk $minor - mknod r$name$unit$slicename$partname \ - c $chr $minor - done - ;; - "") - ;; - *) - echo bad partition for disk in: $i - ;; - esac - chgrp operator $name$unit$slicename* \ - r$name$unit$slicename* - ;; - *) - echo bad slice for disk in: $i - ;; - esac - ;; - *) - echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)" - ;; - esac - umask 77 - ;; - -fd*) - umask $disk_umask - unit=`expr $i : '..\(.*\)'` - name=fd; blk=2; chr=9 - case $unit in - 0|1|2|3) - mknod ${name}${unit} b $blk `expr $unit '*' 64` - mknod r${name}${unit} c $chr `expr $unit '*' 64` - # Fake BSD partitions - for i in a b c d e f g h - do - ln -f ${name}${unit} ${name}${unit}$i - ln -f r${name}${unit} r${name}${unit}$i - done - # User-readable and programmer-readable name sets - - mknod ${name}${unit}.1720 b $blk `expr $unit '*' 64 + 1` - mknod r${name}${unit}.1720 c $chr `expr $unit '*' 64 + 1` - # ln -f ${name}${unit}.1720 ${name}${unit}135hs21 - # ln -f r${name}${unit}.1720 r${name}${unit}135hs21 - - mknod ${name}${unit}.1480 b $blk `expr $unit '*' 64 + 2` - mknod r${name}${unit}.1480 c $chr `expr $unit '*' 64 + 2` - # ln -f ${name}${unit}.1480 ${name}${unit}135hs18 - # ln -f r${name}${unit}.1480 r${name}${unit}135hs18 - # ln -f ${name}${unit}.1480 ${name}${unit}96hs18 - # ln -f r${name}${unit}.1480 r${name}${unit}96hs18 - - mknod ${name}${unit}.1440 b $blk `expr $unit '*' 64 + 3` - mknod r${name}${unit}.1440 c $chr `expr $unit '*' 64 + 3` - # ln -f ${name}${unit}.1440 ${name}${unit}135 - # ln -f r${name}${unit}.1440 r${name}${unit}135 - # ln -f ${name}${unit}.1440 ${name}${unit}135ds18 - # ln -f r${name}${unit}.1440 r${name}${unit}135ds18 - # ln -f ${name}${unit}.1440 ${name}${unit}96ds18 - # ln -f r${name}${unit}.1440 r${name}${unit}96ds18 - - mknod ${name}${unit}.1200 b $blk `expr $unit '*' 64 + 4` - mknod r${name}${unit}.1200 c $chr `expr $unit '*' 64 + 4` - # ln -f ${name}${unit}.1200 ${name}${unit}96 - # ln -f r${name}${unit}.1200 r${name}${unit}96 - # ln -f ${name}${unit}.1200 ${name}${unit}96ds15 - # ln -f r${name}${unit}.1200 r${name}${unit}96ds15 - # ln -f ${name}${unit}.1200 ${name}${unit}135ds15 - # ln -f r${name}${unit}.1200 r${name}${unit}135ds15 - - mknod ${name}${unit}.820 b $blk `expr $unit '*' 64 + 5` - mknod r${name}${unit}.820 c $chr `expr $unit '*' 64 + 5` - # ln -f ${name}${unit}.820 ${name}${unit}96hs10 - # ln -f r${name}${unit}.820 r${name}${unit}96hs10 - # ln -f ${name}${unit}.820 ${name}${unit}135hs10 - # ln -f r${name}${unit}.820 r${name}${unit}135hs10 - - mknod ${name}${unit}.800 b $blk `expr $unit '*' 64 + 6` - mknod r${name}${unit}.800 c $chr `expr $unit '*' 64 + 6` - # ln -f ${name}${unit}.800 ${name}${unit}96ds10 - # ln -f r${name}${unit}.800 r${name}${unit}96ds10 - # ln -f ${name}${unit}.800 ${name}${unit}135ds10 - # ln -f r${name}${unit}.800 r${name}${unit}135ds10 - - mknod ${name}${unit}.720 b $blk `expr $unit '*' 64 + 7` - mknod r${name}${unit}.720 c $chr `expr $unit '*' 64 + 7` - # ln -f ${name}${unit}.720 ${name}${unit}96ds9 - # ln -f r${name}${unit}.720 r${name}${unit}96ds9 - # ln -f ${name}${unit}.720 ${name}${unit}135ds9 - # ln -f r${name}${unit}.720 r${name}${unit}135ds9 - - mknod ${name}${unit}.360 b $blk `expr $unit '*' 64 + 8` - mknod r${name}${unit}.360 c $chr `expr $unit '*' 64 + 8` - # ln -f ${name}${unit}.360 ${name}${unit}48 - # ln -f r${name}${unit}.360 r${name}${unit}48 - # ln -f ${name}${unit}.360 ${name}${unit}48ds9 - # ln -f r${name}${unit}.360 r${name}${unit}48ds9 - - chgrp operator ${name}${unit}* r${name}${unit}* - ;; - *) - echo bad unit for disk in: $i - ;; - esac - umask 77 - ;; - -ft*) - umask $tape_umask - unit=`expr $i : '..\(.*\)'` - name=ft; blk=2; chr=9 - case $unit in - 0|1|2|3) - mknod ${name}${unit} b $blk `expr $unit '*' 64 + 32` - mknod r${name}${unit} c $chr `expr $unit '*' 64 + 32` - ln -f ${name}${unit} ${name}${unit}a - ln -f r${name}${unit} r${name}${unit}a - chgrp operator ${name}${unit}* r${name}${unit}* - ;; - *) - echo bad unit for tape in: $i - ;; - esac - umask 77 - ;; - -ad*|afd*|amrd*|da*|fla*|ida*|md*|mlxd*|od*|sd*|vn*|wd*|wfd*) - umask $disk_umask - case $i in - ad*) name=ad; blk=30; chr=116;; - afd*) name=afd; blk=32; chr=118;; - amrd*) name=amrd; blk=35; chr=133;; - da*) name=da; blk=4; chr=13;; - fla*) name=fla; blk=28; chr=102;; - ida*) name=ida; blk=29; chr=109;; - md*) name=md; blk=22; chr=95;; - mlxd*) name=mlxd; blk=27; chr=131;; - od*) name=od; blk=4; chr=13;; - sd*) name=sd; blk=4; chr=13;; - vn*) name=vn; blk=15; chr=43;; - wd*) name=wd; blk=0; chr=3;; - wfd*) name=wfd; blk=1; chr=87;; - esac - case $i in - amrd*|mlxd*) - unit=`expr $i : '....\(.*\)'` - ;; - afd*|fla*|ida*|wfd*) - unit=`expr $i : '...\(.*\)'` - ;; - *) - unit=`expr $i : '..\(.*\)'` - ;; - esac - case $unit in - [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1]) - for slicepartname in s0h s1 s2 s3 s4 - do - sh MAKEDEV $name$unit$slicepartname - done - ;; - *) - echo bad unit for disk in: $i - ;; - esac - umask 77 - ;; - -ccd*) - umask $disk_umask - name=ccd - blk=21; chr=74 - unit=`expr $i : '...\(.*\)'` - case $unit in - [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1]) - for part in 0 1 2 3 4 5 6 7 - do - minor=`dkminor 0 $unit 0 $part` - partname=`dkitop $part` - mknod $name$unit$partname b $blk $minor - mknod r$name$unit$partname c $chr $minor - done - chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h] - ;; - *) - echo bad unit for disk in: $i - ;; - esac - umask 77 - ;; - -ssc*) - mknod ssc c 49 0 - ;; - -# SCSI processor type driver -pt[0-9]*) - chr=61 - name=pt - unit=`expr $i : 'pt\([0-9][0-9]*\)'` - if [ -z "${unit}" ]; then - unit=0 - fi - unit=`expr $unit + 1 - 1` - mknod ${name}${unit} c $chr $unit - ;; - -# SCSI target mode sample driver -targ[0-9]*) - chr=65 - name=targ - unit=`expr $i : 'targ\([0-9][0-9]*\)'` - if [ -z "${unit}" ]; then - unit=0 - fi - unit=`expr $unit + 1 - 1` - mknod ${name}${unit} c $chr $unit - mknod ${name}.ctl c $chr 0xffff00ff - ;; - -# CAM transport layer device -xpt*) - umask 077 - # This major number is temporary - chr=104 - name=xpt - units=`expr $i : 'xpt\(.*\)'` - if [ -z "${units}" ]; then - units=1 - fi - eval `echo ${chr} ${units} ${name} |awk \ - '{ c=$1; n=$2; name=$3;} END { - for (i = 0; i < n; i++) - printf("rm -f %s%d r%s%d; mknod %s%d c %d %d; \ - chgrp operator %s%d;", \ - name, i, name, i, name, i, c, i, \ - name, i); }'` - ;; -# CAM passthrough device -pass*|uk*) - umask 077 - # This major number is temporary - chr=31 - name=pass - units=`expr $i : 'pass\(.*\)'` - if [ -z "${units}" ]; then - units=1 - fi - eval `echo ${chr} ${units} ${name} |awk \ - '{ c=$1; n=$2; name=$3;} END { - for (i = 0; i < n; i++) - printf("rm -f %s%d r%s%d; mknod %s%d c %d %d; \ - chgrp operator %s%d;", \ - name, i, name, i, name, i, c, i, \ - name, i); }'` - ;; -pty*) - class=`expr $i : 'pty\(.*\)'` - case $class in - 0) offset=0 name=p;; - 1) offset=32 name=q;; - 2) offset=64 name=r;; - 3) offset=96 name=s;; -# Note that xterm (at least) only look at p-s. - 4) offset=128 name=P;; - 5) offset=160 name=Q;; - 6) offset=192 name=R;; - 7) offset=224 name=S;; - # This still leaves [tuTU]. - *) echo bad unit for pty in: $i;; - esac - case $class in - 0|1|2|3|4|5|6|7) - umask 0 - eval `echo $offset $name | awk ' { b=0+$1; n=$2 } END { \ - for (i = 0; i < 32; i++) { - c = substr("0123456789abcdefghijklmnopqrstuv", i + 1, 1); \ - printf("mknod tty%s%s c 5 %d; \ - mknod pty%s%s c 6 %d;", \ - n, c, b+i, \ - n, c, b+i); \ - } \ - }'` - umask 77 - ;; - esac - ;; - -sa*) - umask $tape_umask - unit=`expr $i : '..\(.*\)'` - chr=14 - - case $unit in - [0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]) - mknod rsa${unit}.ctl c $chr `saminor 1 ${unit} 0 0` - for m in 0 1 2 3 - do - mknod rsa${unit}.${m} c $chr `saminor 0 ${unit} ${m} 0` - mknod nrsa${unit}.${m} c $chr `saminor 0 ${unit} ${m} 1` - mknod ersa${unit}.${m} c $chr `saminor 0 ${unit} ${m} 2` - chgrp operator rsa${unit}.${m} nrsa${unit}.${m} \ - ersa${unit}.${m} - done - ln -f rsa${unit}.0 rsa${unit} - ln -f nrsa${unit}.0 nrsa${unit} - ln -f ersa${unit}.0 ersa${unit} - ;; - *) - echo bad unit for tape in: $i - ;; - esac - umask 77 - ;; - -ch*) - umask 37 - unit=`expr $i : '..\(.*\)'` - case $i in - ch*) name=ch; chr=17;; - esac - case $unit in - 0|1|2|3|4|5|6) - mknod ${name}${unit} c $chr $unit - chgrp operator ${name}${unit} - ;; - *) - echo bad unit for media changer in: $i - ;; - esac - umask 77 - ;; - -ast*) - umask 2 ; - unit=`expr $i : '...\(.*\)'` - chr=119 - case $unit in - 0|1|2|3) - mknod rast${unit} c $chr `expr $unit '*' 8 + 0` - chgrp operator rast${unit} - chmod 640 rast${unit} - mknod nrast${unit} c $chr `expr $unit '*' 8 + 1` - chgrp operator nrast${unit} - chmod 640 nrast${unit} - ;; - *) - echo bad unit for tape in: $i - ;; - esac - umask 77 - ;; - -acd*|cd*|mcd*|scd*) - umask $disk_umask - case $i in - acd*) units=`expr $i : '...\(.*\)'`; name=acd; blk=31; chr=117;; - cd*) units=`expr $i : '..\(.*\)'`; name=cd; blk=6; chr=15;; - mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; blk=7; chr=29;; - scd*) units=`expr $i : '...\(.*\)'`; name=scd; blk=16; chr=45;; - esac - if [ -z "${units}" -o "${units}" -le 0 ]; then - units=1 - fi - if [ "${units}" -le 31 ]; then - eval `echo ${chr} ${blk} ${units} ${name} |awk \ - '{ c=$1; b=$2; n=$3; name=$4;} END{ - for (i = 0; i < n; i++){ - printf("rm -f %s%d* r%s%d*; \ - mknod %s%da b %d %d; \ - mknod %s%dc b %d %d; \ - mknod r%s%da c %d %d; \ - mknod r%s%dc c %d %d; \ - chgrp operator %s%d* r%s%d*;", - name, i, name, i, - name, i, b, (i * 8), - name, i, b, (i * 8) + 2, - name, i, c, (i * 8), - name, i, c, (i * 8) + 2, - name, i, name, i); }}'` - else - echo "$i is invalid -- can't have more than 32 cd devices" - fi - umask 77 - ;; - -matcd*) - umask 2 - case $i in - matcd*) unit=`expr $i : '.....\(.*\)'`; name=matcd; blk=17; chr=46;; - esac - case $unit in - 0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15) - mknod ${name}${unit}a b $blk `expr $unit '*' 8 + 0` - mknod ${name}${unit}c b $blk `expr $unit '*' 8 + 2` - mknod r${name}${unit}a c $chr `expr $unit '*' 8 + 0` - mknod r${name}${unit}c c $chr `expr $unit '*' 8 + 2` - chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h] - chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h] - - mknod ${name}${unit}la b $blk `expr $unit '*' 8 + 128` - mknod ${name}${unit}lc b $blk `expr $unit '*' 8 + 130` - mknod r${name}${unit}la c $chr `expr $unit '*' 8 + 128` - mknod r${name}${unit}lc c $chr `expr $unit '*' 8 + 130` - chgrp operator ${name}${unit}l[a-h] r${name}${unit}l[a-h] - chmod 640 ${name}${unit}l[a-h] r${name}${unit}l[a-h] - ;; - *) - echo bad unit for disk in: $i - ;; - esac - umask 77 - ;; - -wcd*) - umask 2 ; - unit=`expr $i : '...\(.*\)'` - blk=19 - chr=69 - case $unit in - 0|1|2|3|4|5|6|7) - mknod wcd${unit}a b $blk `expr $unit '*' 8 + 0` - mknod rwcd${unit}a c $chr `expr $unit '*' 8 + 0` - mknod wcd${unit}c b $blk `expr $unit '*' 8 + 2` - mknod rwcd${unit}c c $chr `expr $unit '*' 8 + 2` - chgrp operator wcd${unit}[a-h] rwcd${unit}[a-h] - chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h] - ;; - *) - echo bad unit for disk in: $i - ;; - esac - umask 77 - ;; - -wst*) - umask 2 ; - unit=`expr $i : '...\(.*\)'` - chr=90 - case $unit in - 0|1|2|3) - mknod rwst${unit} c $chr `expr $unit '*' 8 + 0` - chgrp operator rwst${unit} - chmod 640 rwst${unit} - ;; - esac - umask 77 - ;; - -iic*) - unit=`expr $i : 'iic\(.*\)'` - mknod iic$unit c 105 $unit - ;; - -smb*) - unit=`expr $i : 'smb\(.*\)'` - mknod smb$unit c 106 $unit - ;; - -ppi*) - unit=`expr $i : 'ppi\(.*\)'` - mknod ppi$unit c 82 $unit - ;; - -pps*) - unit=`expr $i : 'pps\(.*\)'` - mknod pps$unit c 89 $unit - ;; - -usb) - mknod usb$unit c 108 255 - ;; - -usb*) - unit=`expr $i : 'usb\(.*\)'` - mknod usb$unit c 108 $unit - ;; - -ums*) - unit=`expr $i : 'ums\(.*\)'` - mknod ums$unit c 111 $unit - ;; - -ulpt*) - unit=`expr $i : 'ulpt\(.*\)'` - mknod ulpt$unit c 113 $unit - ;; - -ugen*) - unit=`expr $i : 'ugen\([0-9][0-9]*\)'` - endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'` - if [ -z "${unit}" ]; then - echo $i - Invalid unit number - fi - if [ -z "${endpoint}" ]; then - minor=`expr $unit \* 16` - mknod ugen$unit c 114 $minor - else - minor=`expr $unit \* 16 + $endpoint` - mknod ugen$unit.$endpoint c 114 $minor - fi - ;; - -lpt*) - unit=`expr $i : 'lpt\(.*\)'` - mknod lpt$unit c 16 $unit - mknod lpctl$unit c 16 `expr $unit + 128` - ;; - -tw*) - unit=`expr $i : 'tw\(.*\)'` - mknod tw$unit c 19 $unit - chgrp operator tw$unit - ;; - -# Use this to create virtual consoles for syscons, pcvt or codrv -# ttyv0-b -# use as MAKEDEV vtyNN to create NN entries -vty*) - chr=12 - units=`expr $i : 'vty\(.*\)'` - eval `echo ${chr} ${units} | awk ' { c=0+$1; n=0+$2 } END { - for (i = 0; i < n; i++) - printf("mknod ttyv%01x c %d %d;", i, c, i); }'` - ln -fs ttyv0 vga # XXX X still needs this pccons relic - ;; - -bpf*) - nbpf=`expr $i : 'bpf\(.*\)$'` - unit=0 - while [ $unit -le $nbpf ]; do - mknod bpf$unit c 23 $unit - unit=`expr $unit + 1` - done - ;; - -speaker) - mknod speaker c 26 0 - ;; - -cuaa?|cua?) - umask 7 - unit=`expr $i : 'cua.*\(.\)$'` - m=`ttyminor $unit` - mknod cuaa$unit c 28 `expr $m + 128` - mknod cuaia$unit c 28 `expr $m + 32 + 128` - mknod cuala$unit c 28 `expr $m + 64 + 128` - chown uucp:dialer cua*a$unit - umask 77 - ;; - -tty0?|ttyd?|tty?) - unit=`expr $i : 'tty.*\(.\)$'` - m=`ttyminor $unit` - mknod ttyd$unit c 28 $m - mknod ttyid$unit c 28 `expr $m + 32` - mknod ttyld$unit c 28 `expr $m + 64` - ;; - -cuac?) - umask 7 - portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f - g h i j k l m n o p q r s t u v" - major=48 - card=`expr $i : 'cua.*\(.\)$'` - for unit in $portlist - do - minor=`ttyminor $unit` - minor=`expr $card \* 65536 + $minor` - name=$card$unit - mknod cuac$name c $major `expr $minor + 128` - mknod cuaic$name c $major `expr $minor + 32 + 128` - mknod cualc$name c $major `expr $minor + 64 + 128` - chown uucp:dialer cuac$name cuaic$name cualc$name - done - umask 77 - ;; - -ttyc?) - portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f - g h i j k l m n o p q r s t u v" - major=48 - card=`expr $i : 'tty.*\(.\)$'` - for unit in $portlist - do - minor=`ttyminor $unit` - minor=`expr $card \* 65536 + $minor` - name=$card$unit - mknod ttyc$name c $major $minor - mknod ttyic$name c $major `expr $minor + 32` - mknod ttylc$name c $major `expr $minor + 64` - done - ;; - -# RISCom8 'rc' driver entries - -cuam?) - umask 7 - unit=`expr $i : 'cua.*\(.\)$'` - m=`ttyminor $unit` - mknod cuam$unit c 63 `expr $m + 128` - chown uucp:dialer cuam$unit - umask 77 - ;; - -ttym?) - unit=`expr $i : 'tty.*\(.\)$'` - m=`ttyminor $unit` - mknod ttym$unit c 63 $m - ;; - -# Specialix SI/XIO. -# Note: these are 'base 1' to match the numbers on the panels, and to match -# the manual that comes with the system. -ttyA*) - major=68 - nports=`expr $i : 'ttyA\(.*\)$'` - port=1 - while [ $port -le $nports ]; do - minor=`expr $port - 1` - name=`expr $port + 1000 | cut -c 3-4` - mknod ttyA$name c $major $minor - mknod ttyiA$name c $major `expr $minor + 65536` - mknod ttylA$name c $major `expr $minor + 131072` - port=`expr $port + 1` - done - # For the user-mode control program, 'sicontrol' - mknod si_control c 68 262144 - ;; - -cuaA*) - umask 7 - major=68 - nports=`expr $i : 'cuaA\(.*\)$'` - port=1 - while [ $port -le $nports ]; do - minor=`expr $port - 1` - name=`expr $port + 1000 | cut -c 3-4` - mknod cuaA$name c $major `expr $minor + 128` - mknod cuaiA$name c $major `expr $minor + 128 + 65536` - mknod cualA$name c $major `expr $minor + 128 + 131072` - chown uucp:dialer cuaA$name cuaiA$name cualA$name - port=`expr $port + 1` - done - umask 77 - ;; - -# Digiboard PC/?? 16 port card. -# The current scheme of minor numbering is: -# -# unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5} -# -# CARD bitfield in future versions may be extended to 3 bits. -# -# See dgb(4) -# -ttyD?) - portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" - major=58 - card=`expr $i : 'tty.*\(.\)$'` - for unit in $portlist - do - minor=`ttyminor $unit` - minor=`expr $card \* 65536 + $minor` - name=$card$unit - mknod ttyD$name c $major $minor - mknod ttyiD$name c $major `expr $minor + 32` - mknod ttylD$name c $major `expr $minor + 64` - done - ;; - -cuaD?) - umask 7 - portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" - major=58 - card=`expr $i : 'cua.*\(.\)$'` - for unit in $portlist - do - minor=`ttyminor $unit` - minor=`expr $card \* 65536 + $minor` - name=$card$unit - mknod cuaD$name c $major `expr $minor + 128` - mknod cuaiD$name c $major `expr $minor + 32 + 128` - mknod cualD$name c $major `expr $minor + 64 + 128` - chown uucp:dialer cua*D$name - done - umask 77 - ;; - -ttyM*) - portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" - modulelist="a b c d" - major=101 - card=`expr $i : 'tty.*\(.\)$'` - for unit in $modulelist - do - moduleminor=`ttyminor $unit` - moduleminor=`expr $moduleminor % 10 \* 16` - modulename=$unit - - for unit in $portlist - do - minor=`ttyminor $unit` - minor=`expr $card \* 65536 + $minor + $moduleminor` - name=$card$modulename$unit - rm -f tty*M$name - mknod ttyM$name c $major $minor - mknod ttyiM$name c $major `expr $minor + 64` - mknod ttylM$name c $major `expr $minor + 128` - chown root:wheel tty*M$name - done - done - ;; - -cuaM?) - umask 7 - portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" - modulelist="a b c d" - major=101 - card=`expr $i : 'cua.*\(.\)$'` - for unit in $modulelist - do - moduleminor=`ttyminor $unit` - moduleminor=`expr $moduleminor % 10 \* 16` - modulename=$unit - - for unit in $portlist - do - minor=`ttyminor $unit` - minor=`expr $card \* 65536 + $minor + $moduleminor` - name=$card$modulename$unit - rm -f cua*M$name - mknod cuaM$name c $major `expr $minor + 262144` - mknod cuaiM$name c $major `expr $minor + 64 + 262144` - mknod cualM$name c $major `expr $minor + 128 + 262144` - chown uucp:dialer cua*M$name - done - done - umask 77 - ;; - -ttyR?) - major=81 - BOARD=1; MINOR=65536; Rnum=0 - MINOR=`expr $BOARD \* 65536` - dmesg | grep ^RocketPort[0-4] > /tmp/rp_list - controllers=`awk '{print $1}' < /tmp/rp_list` - rm -f /dev/ttyR*; rm -f /dev/ttyiR*; rm -f /dev/ttylR* - for i in $controllers;do - ndevices=`grep ^$i /tmp/rp_list | sed -e 's/.* \([0-9]*\) ports/\1/'` - echo -n "Creating $ndevices devices for $i: " - for dev in `jot $ndevices 0`;do - mknod /dev/ttyR$Rnum c $major $MINOR - mknod /dev/ttylR$Rnum c $major `expr $MINOR + 32` - mknod /dev/ttyiR$Rnum c $major `expr $MINOR + 64` - Rnum=`expr $Rnum + 1` - MINOR=`expr $MINOR + 1` - done - BOARD=`expr $BOARD + 1` - MINOR=`expr $BOARD \* 65536` - echo " " - done - ;; - -cuaR?) - major=81 - BOARD=1; MINOR=65536; Rnum=0 - MINOR=`expr $BOARD \* 65536` - dmesg | grep ^RocketPort[0-4] > /tmp/rp_list - controllers=`awk '{print $1}' < /tmp/rp_list` - rm -f /dev/cuaR*; rm -f /dev/cuaiR*; rm -f /dev/cualR* - for i in $controllers;do - ndevices=`grep ^$i /tmp/rp_list | sed -e 's/.* \([0-9]*\) ports/\1/'` - echo -n "Creating $ndevices devices for $i: " - for dev in `jot $ndevices 0`;do - mknod /dev/cuaR$Rnum c $major `expr $MINOR + 128` - mknod /dev/cualR$Rnum c $major `expr $MINOR + 128 + 32` - mknod /dev/cuaiR$Rnum c $major `expr $MINOR + 128 + 64` - Rnum=`expr $Rnum + 1` - MINOR=`expr $MINOR + 1` - done - BOARD=`expr $BOARD + 1` - MINOR=`expr $BOARD \* 65536` - echo " " - done - chown uucp:dialer /dev/cuaR* - ;; - -mse*) - unit=`expr $i : 'mse\(.*\)'` - chr=27 - mknod mse$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11 - ;; - -psm*) - unit=`expr $i : 'psm\(.*\)'` - chr=21 - mknod psm$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11 - ;; - -mouse*) - name=`expr $i : 'mouse\(.*\)'` - if [ ! -c $name ]; then - $0 $name # make the appropriate device - fi - ln -fs $name mouse - ;; - -pcaudio) - mknod pcaudio c 24 0 - mknod pcaudioctl c 24 128 - ;; - -socksys) - mknod socksys c 41 0 - mknod spx c 41 1 - ln -fs socksys nfsd - chmod 666 socksys nfsd spx - ;; - -snd*) -# -# changes from Linux voxware -# minor Linux FreeBSD -# 8 sequencer2 (aka music0) music0 -# 17 patmgr0 sequencer1 -# 33 patmgr1 sequencer2 -# - - unit=`expr $i : 'snd\(.*\)'` - chr=30 - - # XXX write this less verbosely, like std - snd_security_hole=0 # XXX - umask $snd_security_hole - - ln -fs mixer$unit mixer - ln -fs sequencer$unit sequencer - ln -fs dsp$unit dsp - ln -fs audio$unit audio - ln -fs dspW$unit dspW - ln -fs music$unit music - ln -fs pss$unit pss - - mknod mixer$unit c $chr `expr $unit '*' 16 + 0` - mknod sequencer$unit c $chr `expr $unit '*' 16 + 1` - mknod midi$unit c $chr `expr $unit '*' 16 + 2` - mknod dsp$unit c $chr `expr $unit '*' 16 + 3` - mknod audio$unit c $chr `expr $unit '*' 16 + 4` - mknod dspW$unit c $chr `expr $unit '*' 16 + 5` - mknod sndstat c $chr 6 - # minor number 7 is unused - mknod music$unit c $chr `expr $unit '*' 16 + 8` - mknod pss$unit c $chr `expr $unit '*' 16 + 9` - # minor numbers 10-15 are unused - umask 77 - ;; - -vat) - mknod vatio c 25 128 - chmod 660 vatio - ;; - -gsc*) - unit=`expr $i : 'gsc\(.*\)'` - mknod gsc${unit} c 47 $unit - mknod gsc${unit}p c 47 $(($unit + 8)) - mknod gsc${unit}d c 47 $(($unit + 32)) - mknod gsc${unit}pd c 47 $(($unit + 40)) - chmod 666 gsc${unit}* - ;; - -apm*) - chr=39 - mknod apm c $chr 0 - mknod apmctl c $chr 8 - chgrp operator apm - chgrp operator apmctl - chmod 660 apm - chmod 660 apmctl - ;; - -card*) - unit=`expr $i : 'card\(.*\)'` - chr=50 - mknod card$unit c $chr $unit - chmod 644 card$unit - ;; - -ttyx?|ttyy?|ttyz?) - case $i in - *0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;; - *4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;; - *8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;; - *c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;; - esac - case $i in - ttyy?) unit=`expr $unit \+ 16`;; - ttyz?) unit=`expr $unit \+ 32`;; - esac - mknod $i c 42 $unit - chown uucp:wheel $i - ;; - -cronyx) - mknod cronyx c 42 63 - ;; - -joy) - mknod joy0 c 51 0 - mknod joy1 c 51 1 - chgrp operator joy0 joy1 - chmod 640 joy0 joy1 - ;; - -spigot) - mknod spigot c 11 0 - chmod 444 spigot - ;; - -ctx?) - unit=`expr $i : 'ctx\(.*\)'` - mknod ctx$unit c 40 $unit - chmod 444 ctx$unit - ;; - -meteor?) - unit=`expr $i : 'meteor\(.*\)'` - mknod meteor$unit c 67 $unit - chmod 444 meteor$unit - ;; - -bktr?) - unit=`expr $i : 'bktr\(.*\)'` - mknod bktr$unit c 92 $unit - mknod tuner$unit c 92 $((16 + $unit )) - mknod vbi$unit c 92 $((32 + $unit )) - chmod 444 bktr$unit tuner$unit vbi$unit - ;; - -tun*) - ntun=`expr $i : 'tun\(.*\)$'` - unit=0 - while [ $unit -le $ntun ]; do - mknod tun$unit c 52 $unit - chown uucp:dialer tun$unit - unit=`expr $unit + 1` - done - ;; - -sysmouse) - mknod sysmouse c 12 128 - mknod consolectl c 12 255 - ;; - -snp?) - unit=`expr $i : 'snp\(.*\)'` - mknod snp$unit c 53 $unit - ;; - -# dufault@hda.com: If I do much more work on other A-D boards -# then eventually we'll have a "ad" and "dio" interface and some of these -# "labpcaio" ones will be gone. -# labpcaio: D-A and A-D. -# labpcdio: Digital in and Digital out. -# -labpc*) - umask 7 - case $i in - labpcaio*) - name=labpcaio - unit=`expr $i : 'labpcaio\(.*\)'` - all="0 1 2 3 4 5 6 7" - offset=0 - ;; - labpcdio*) - name=labpcdio - unit=`expr $i : 'labpcdio\(.*\)'` - all="0 1 2 3" - offset=8 - ;; - *) - die 3 "Don't know LabPC type $i" - ;; - esac - if [ -z "${unit}" ]; then - unit=all - fi - case $unit in - 0|1|2|3|4|5|6|7) - mknod $name$unit c 66 `expr $offset + $unit ` - ;; - all) - for i in $all - do - mknod $name$i c 66 `expr $offset + $i ` - done - ;; - *) - echo "No such LabPC unit: $unit" - ;; - esac - umask 77 - ;; - -perfmon) - mknod perfmon c 2 32 - chgrp kmem perfmon - chmod 640 perfmon - ;; - -kbd*) - unit=`expr $i : 'kbd\(.*\)'` - chr=112 - mknod kbd$unit c $chr $unit - ;; - -i4b) - mknod i4b c 60 0 - chown root:wheel i4b - chmod 600 i4b - ;; - -i4bctl) - mknod i4bctl c 55 0 - chown root:wheel i4bctl - chmod 600 i4bctl - ;; - -i4brbch*) - unit=`expr $i : 'i4brbch\(.*\)'` - mknod i4brbch$unit c 57 $unit - chown root:wheel i4brbch$unit - chmod 600 i4brbch$unit - ;; - -i4bteld*) - offset=64 - unit=`expr $i : 'i4bteld\(.*\)'` - mknod i4bteld$unit c 56 `expr $offset + $unit ` - chown root:wheel i4bteld$unit - chmod 600 i4bteld$unit - ;; - -i4btel*) - unit=`expr $i : 'i4btel\(.*\)'` - mknod i4btel$unit c 56 $unit - chown root:wheel i4btel$unit - chmod 600 i4btel$unit - ;; - -i4btrc*) - unit=`expr $i : 'i4btrc\(.*\)'` - mknod i4btrc$unit c 59 $unit - chown root:wheel i4btrc$unit - chmod 600 i4btrc$unit - ;; - -local) - umask 0 # XXX should be elsewhere - sh MAKEDEV.local - umask 77 - ;; - -*) - echo $i - no such device name - ;; - -esac -done |