diff options
Diffstat (limited to 'etc/defaults/rc.conf')
| -rw-r--r-- | etc/defaults/rc.conf | 214 |
1 files changed, 214 insertions, 0 deletions
diff --git a/etc/defaults/rc.conf b/etc/defaults/rc.conf new file mode 100644 index 0000000..76256ef --- /dev/null +++ b/etc/defaults/rc.conf @@ -0,0 +1,214 @@ +#!/bin/sh +# + +# This is rc.conf - a file full of useful variables that you can set +# to change the default startup behavior of your system. You should +# not edit this file! Put any overrides into one of the ${rc_conf_files} +# instead and you will be able to update these defaults later without +# spamming your local configuration information. +# +# All arguments must be in double or single quotes. +# +# $Id: rc.conf,v 1.83 1999/02/09 04:17:45 dillon Exp $ + +############################################################## +### Important initial Boot-time options ##################### +############################################################## + +swapfile="NO" # Set to name of swapfile if aux swapfile desired. +apm_enable="NO" # Set to YES if you want APM enabled. +pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. +pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. +pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). +local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. +local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs +rc_conf_files="/etc/rc.conf /etc/rc.conf.local" + +############################################################## +### Network configuration sub-section ###################### +############################################################## + +### Basic network options: ### +hostname="myname.my.domain" # Set this! +nisdomainname="NO" # Set to NIS domain if using NIS (or NO). +firewall_enable="NO" # Set to YES to enable firewall functionality +firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) +firewall_quiet="NO" # Set to YES to suppress rule display +natd_enable="NO" # Enable natd (if firewall_enable == YES). +natd_interface="fxp0" # Public interface to use with natd. +natd_flags="" # Additional flags for natd. +tcp_extensions="NO" # Disallow RFC1323 extensions (or YES). +network_interfaces="lo0" # List of network interfaces (lo0 is loopback). +ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. +#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. +# +# If you have any sppp(4) interfaces above, you might also want to set +# the following parameters. Refer to spppcontrol(8) for their meaning. +sppp_interfaces="" # List of sppp interfaces. +#sppp_interfaces="isp0" # example: sppp over ISDN +#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" + +### Network daemon (miscellaneous) & NFS options: ### +syslogd_enable="YES" # Run syslog daemon (or NO). +syslogd_flags="" # Flags to syslogd (if enabled). +inetd_enable="YES" # Run the network daemon dispatcher (or NO). +inetd_flags="" # Optional flags to inetd. +# +# named. It may be possible to run named in a sandbox, man security for +# details. +# +named_enable="NO" # Run named, the DNS server (or NO). +named_program="named" # path to named, if you want a different one. +named_flags="" # Flags for named +#named_flags="-u bind -g bind" # Flags for named + +kerberos_server_enable="NO" # Run a kerberos master server (or NO). +kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on + # a slave kerberos server +kerberos_stash="" # Is the kerberos master key stashed? +rwhod_enable="NO" # Run the rwho daemon (or NO). +rwhod_flags="" # Flags for rwhod +amd_enable="NO" # Run amd service with $amd_flags (or NO). +amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map" +amd_map_program="NO" # Can be set to "ypcat -k amd.master" +nfs_client_enable="NO" # This host is an NFS client (or NO). +nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). +nfs_access_cache="2" # Client cache timeout in seconds +nfs_server_enable="NO" # This host is an NFS server (or NO). +nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). +mountd_flags="-r" # Flags to mountd (if NFS server enabled). +nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). +rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. +rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). +portmap_enable="YES" # Run the portmapper service (or NO). +portmap_flags="" # Flags to portmap (if enabled). +rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). +keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). +keyserv_flags="" # Flags to keyserv (if enabled). +rarpd_enable="NO" # Run rarpd (or NO). +rarpd_flags="" # Flags to rarpd. +xtend_enable="NO" # Run the X-10 power controller daemon. +xtend_flags="" # Flags to xtend (if enabled). + +### Network Time Services options: ### +timed_enable="NO" # Run the time daemon (or NO). +timed_flags="" # Flags to timed (if enabled). +ntpdate_enable="NO" # Run the ntpdate to sync time (or NO). +ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. +ntpdate_flags="" # Flags to ntpdate (if enabled). +xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO). +xntpd_program="xntpd" # path to xntpd, if you want a different one. +xntpd_flags="-p /var/run/xntpd.pid" # Flags to xntpd (if enabled). + +# Network Information Services (NIS) options: ### +nis_client_enable="NO" # We're an NIS client (or NO). +nis_client_flags="" # Flags to ypbind (if enabled). +nis_ypset_enable="NO" # Run ypset at boot time (or NO). +nis_ypset_flags="" # Flags to ypset (if enabled). +nis_server_enable="NO" # We're an NIS server (or NO). +nis_server_flags="" # Flags to ypserv (if enabled). +nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). +nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). +nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). +nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). + +### Network routing options: ### +defaultrouter="NO" # Set to default gateway (or NO). +static_routes="" # Set to static route list (or leave empty). +gateway_enable="NO" # Set to YES if this host will be a gateway. +router_enable="NO" # Set to YES to enable a routing daemon. +router="routed" # Name of routing daemon to use if enabled. +router_flags="-q" # Flags for routing daemon. +mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). +mrouted_flags="" # Flags for multicast routing daemon. +ipxgateway_enable="NO" # Set to YES to enable IPX routing. +ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. +ipxrouted_flags="" # Flags for IPX routing daemon. +arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. +forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") +accept_sourceroute="NO" # accept source routed packets to us + +### ATM interface options: ### +atm_enable="NO" # Configure ATM interfaces (or NO). +#atm_netif_hea0="atm 1" # Network interfaces for physical interface. +#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. +#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). +#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). +#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). +#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). +atm_pvcs="" # Set to PVC list (or leave empty). +atm_arps="" # Set to permanent ARP list (or leave empty). + +### ISDN interface options: ### +isdn_enable="NO" # Enable the ISDN subsystem (or NO). +isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). +isdn_flags="-dn -d0x1f9" # Flags for isdnd +isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). +isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace + +### Miscellaneous network options: ### +icmp_bmcastecho="NO" # respond to broadcast ping packets + + +############################################################## +### System console options ################################# +############################################################## + +keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). +keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). +keybell="NO" # bell to duration.pitch or normal or visual (or NO). +keychange="NO" # function keys default values (or NO). +cursor="NO" # cursor type {normal|blink|destructive} (or NO). +scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). +font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). +font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). +font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). +blanktime="300" # blank time (in seconds) or "NO" to turn it off. +saver="NO" # screen saver: Uses /modules/${saver}_saver.ko +moused_enable="NO" # Run the mouse daemon. +moused_type="auto" # See man page for rc.conf(5) for available settings. +moused_port="/dev/cuaa0" # Set to your mouse port. +moused_flags="" # Any additional flags to moused. +allscreens_flags="" # Set this vidcontrol mode for all virtual screens + + +############################################################## +### Miscellaneous administrative options ################### +############################################################## + +cron_enable="YES" # Run the periodic job daemon. +lpd_enable="NO" # Run the line printer daemon. +lpd_flags="" # Flags to lpd (if enabled). +usbd_enable="NO" # Run the usbd daemon. +usbd_flags="" # Flags to usbd (if enabled). +sendmail_enable="YES" # Run the sendmail daemon (or NO). +sendmail_flags="-bd -q30m" # -bd is pretty mandatory. +dumpdev="NO" # Device name to crashdump to (if enabled). +check_quotas="NO" # Check quotas (or NO). +accounting_enable="NO" # Turn on process accounting (or NO). +ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). +linux_enable="NO" # Linux emulation loaded at startup (or NO). +svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). +rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). +clear_tmp_enable="NO" # Clear /tmp at startup. +ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" + # shared library search paths +ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" + # a.out shared library search paths +kern_securelevel_enable="NO" # kernel security level (see init(8)), +kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure +update_motd="YES" # update version info in /etc/motd (or NO) +vinum_drives="" # put in names of disks containing vinum drives + +############################################################## +### Allow local configuration override at the very end here ## +############################################################## +# +# + +for i in ${rc_conf_files}; do + if [ -f $i ]; then + . $i + fi +done + |
