diff options
Diffstat (limited to 'crypto/openssl/doc/apps/s_server.pod')
-rw-r--r-- | crypto/openssl/doc/apps/s_server.pod | 327 |
1 files changed, 0 insertions, 327 deletions
diff --git a/crypto/openssl/doc/apps/s_server.pod b/crypto/openssl/doc/apps/s_server.pod deleted file mode 100644 index 7c1a958..0000000 --- a/crypto/openssl/doc/apps/s_server.pod +++ /dev/null @@ -1,327 +0,0 @@ - -=pod - -=head1 NAME - -s_server - SSL/TLS server program - -=head1 SYNOPSIS - -B<openssl> B<s_server> -[B<-accept port>] -[B<-context id>] -[B<-verify depth>] -[B<-Verify depth>] -[B<-cert filename>] -[B<-certform DER|PEM>] -[B<-key keyfile>] -[B<-keyform DER|PEM>] -[B<-pass arg>] -[B<-dcert filename>] -[B<-dcertform DER|PEM>] -[B<-dkey keyfile>] -[B<-dkeyform DER|PEM>] -[B<-dpass arg>] -[B<-dhparam filename>] -[B<-nbio>] -[B<-nbio_test>] -[B<-crlf>] -[B<-debug>] -[B<-msg>] -[B<-state>] -[B<-CApath directory>] -[B<-CAfile filename>] -[B<-nocert>] -[B<-cipher cipherlist>] -[B<-quiet>] -[B<-no_tmp_rsa>] -[B<-ssl2>] -[B<-ssl3>] -[B<-tls1>] -[B<-no_ssl2>] -[B<-no_ssl3>] -[B<-no_tls1>] -[B<-no_dhe>] -[B<-bugs>] -[B<-hack>] -[B<-www>] -[B<-WWW>] -[B<-HTTP>] -[B<-engine id>] -[B<-id_prefix arg>] -[B<-rand file(s)>] - -=head1 DESCRIPTION - -The B<s_server> command implements a generic SSL/TLS server which listens -for connections on a given port using SSL/TLS. - -=head1 OPTIONS - -=over 4 - -=item B<-accept port> - -the TCP port to listen on for connections. If not specified 4433 is used. - -=item B<-context id> - -sets the SSL context id. It can be given any string value. If this option -is not present a default value will be used. - -=item B<-cert certname> - -The certificate to use, most servers cipher suites require the use of a -certificate and some require a certificate with a certain public key type: -for example the DSS cipher suites require a certificate containing a DSS -(DSA) key. If not specified then the filename "server.pem" will be used. - -=item B<-certform format> - -The certificate format to use: DER or PEM. PEM is the default. - -=item B<-key keyfile> - -The private key to use. If not specified then the certificate file will -be used. - -=item B<-keyform format> - -The private format to use: DER or PEM. PEM is the default. - -=item B<-pass arg> - -the private key password source. For more information about the format of B<arg> -see the B<PASS PHRASE ARGUMENTS> section in L<openssl(1)|openssl(1)>. - -=item B<-dcert filename>, B<-dkey keyname> - -specify an additional certificate and private key, these behave in the -same manner as the B<-cert> and B<-key> options except there is no default -if they are not specified (no additional certificate and key is used). As -noted above some cipher suites require a certificate containing a key of -a certain type. Some cipher suites need a certificate carrying an RSA key -and some a DSS (DSA) key. By using RSA and DSS certificates and keys -a server can support clients which only support RSA or DSS cipher suites -by using an appropriate certificate. - -=item B<-dcertform format>, B<-dkeyform format>, B<-dpass arg> - -addtional certificate and private key format and passphrase respectively. - -=item B<-nocert> - -if this option is set then no certificate is used. This restricts the -cipher suites available to the anonymous ones (currently just anonymous -DH). - -=item B<-dhparam filename> - -the DH parameter file to use. The ephemeral DH cipher suites generate keys -using a set of DH parameters. If not specified then an attempt is made to -load the parameters from the server certificate file. If this fails then -a static set of parameters hard coded into the s_server program will be used. - -=item B<-no_dhe> - -if this option is set then no DH parameters will be loaded effectively -disabling the ephemeral DH cipher suites. - -=item B<-no_tmp_rsa> - -certain export cipher suites sometimes use a temporary RSA key, this option -disables temporary RSA key generation. - -=item B<-verify depth>, B<-Verify depth> - -The verify depth to use. This specifies the maximum length of the -client certificate chain and makes the server request a certificate from -the client. With the B<-verify> option a certificate is requested but the -client does not have to send one, with the B<-Verify> option the client -must supply a certificate or an error occurs. - -=item B<-CApath directory> - -The directory to use for client certificate verification. This directory -must be in "hash format", see B<verify> for more information. These are -also used when building the server certificate chain. - -=item B<-CAfile file> - -A file containing trusted certificates to use during client authentication -and to use when attempting to build the server certificate chain. The list -is also used in the list of acceptable client CAs passed to the client when -a certificate is requested. - -=item B<-state> - -prints out the SSL session states. - -=item B<-debug> - -print extensive debugging information including a hex dump of all traffic. - -=item B<-msg> - -show all protocol messages with hex dump. - -=item B<-nbio_test> - -tests non blocking I/O - -=item B<-nbio> - -turns on non blocking I/O - -=item B<-crlf> - -this option translated a line feed from the terminal into CR+LF. - -=item B<-quiet> - -inhibit printing of session and certificate information. - -=item B<-ssl2>, B<-ssl3>, B<-tls1>, B<-no_ssl2>, B<-no_ssl3>, B<-no_tls1> - -these options disable the use of certain SSL or TLS protocols. By default -the initial handshake uses a method which should be compatible with all -servers and permit them to use SSL v3, SSL v2 or TLS as appropriate. - -=item B<-bugs> - -there are several known bug in SSL and TLS implementations. Adding this -option enables various workarounds. - -=item B<-hack> - -this option enables a further workaround for some some early Netscape -SSL code (?). - -=item B<-cipher cipherlist> - -this allows the cipher list used by the server to be modified. When -the client sends a list of supported ciphers the first client cipher -also included in the server list is used. Because the client specifies -the preference order, the order of the server cipherlist irrelevant. See -the B<ciphers> command for more information. - -=item B<-www> - -sends a status message back to the client when it connects. This includes -lots of information about the ciphers used and various session parameters. -The output is in HTML format so this option will normally be used with a -web browser. - -=item B<-WWW> - -emulates a simple web server. Pages will be resolved relative to the -current directory, for example if the URL https://myhost/page.html is -requested the file ./page.html will be loaded. - -=item B<-HTTP> - -emulates a simple web server. Pages will be resolved relative to the -current directory, for example if the URL https://myhost/page.html is -requested the file ./page.html will be loaded. The files loaded are -assumed to contain a complete and correct HTTP response (lines that -are part of the HTTP response line and headers must end with CRLF). - -=item B<-engine id> - -specifying an engine (by it's unique B<id> string) will cause B<s_server> -to attempt to obtain a functional reference to the specified engine, -thus initialising it if needed. The engine will then be set as the default -for all available algorithms. - -=item B<-id_prefix arg> - -generate SSL/TLS session IDs prefixed by B<arg>. This is mostly useful -for testing any SSL/TLS code (eg. proxies) that wish to deal with multiple -servers, when each of which might be generating a unique range of session -IDs (eg. with a certain prefix). - -=item B<-rand file(s)> - -a file or files containing random data used to seed the random number -generator, or an EGD socket (see L<RAND_egd(3)|RAND_egd(3)>). -Multiple files can be specified separated by a OS-dependent character. -The separator is B<;> for MS-Windows, B<,> for OpenVMS, and B<:> for -all others. - -=back - -=head1 CONNECTED COMMANDS - -If a connection request is established with an SSL client and neither the -B<-www> nor the B<-WWW> option has been used then normally any data received -from the client is displayed and any key presses will be sent to the client. - -Certain single letter commands are also recognized which perform special -operations: these are listed below. - -=over 4 - -=item B<q> - -end the current SSL connection but still accept new connections. - -=item B<Q> - -end the current SSL connection and exit. - -=item B<r> - -renegotiate the SSL session. - -=item B<R> - -renegotiate the SSL session and request a client certificate. - -=item B<P> - -send some plain text down the underlying TCP connection: this should -cause the client to disconnect due to a protocol violation. - -=item B<S> - -print out some session cache status information. - -=back - -=head1 NOTES - -B<s_server> can be used to debug SSL clients. To accept connections from -a web browser the command: - - openssl s_server -accept 443 -www - -can be used for example. - -Most web browsers (in particular Netscape and MSIE) only support RSA cipher -suites, so they cannot connect to servers which don't use a certificate -carrying an RSA key or a version of OpenSSL with RSA disabled. - -Although specifying an empty list of CAs when requesting a client certificate -is strictly speaking a protocol violation, some SSL clients interpret this to -mean any CA is acceptable. This is useful for debugging purposes. - -The session parameters can printed out using the B<sess_id> program. - -=head1 BUGS - -Because this program has a lot of options and also because some of -the techniques used are rather old, the C source of s_server is rather -hard to read and not a model of how things should be done. A typical -SSL server program would be much simpler. - -The output of common ciphers is wrong: it just gives the list of ciphers that -OpenSSL recognizes and the client supports. - -There should be a way for the B<s_server> program to print out details of any -unknown cipher suites a client says it supports. - -=head1 SEE ALSO - -L<sess_id(1)|sess_id(1)>, L<s_client(1)|s_client(1)>, L<ciphers(1)|ciphers(1)> - -=cut |