diff options
Diffstat (limited to 'crypto/openssl/crypto/sha/asm/sha512-ia64.pl')
-rwxr-xr-x | crypto/openssl/crypto/sha/asm/sha512-ia64.pl | 432 |
1 files changed, 432 insertions, 0 deletions
diff --git a/crypto/openssl/crypto/sha/asm/sha512-ia64.pl b/crypto/openssl/crypto/sha/asm/sha512-ia64.pl new file mode 100755 index 0000000..0aea023 --- /dev/null +++ b/crypto/openssl/crypto/sha/asm/sha512-ia64.pl @@ -0,0 +1,432 @@ +#!/usr/bin/env perl +# +# ==================================================================== +# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# project. Rights for redistribution and usage in source and binary +# forms are granted according to the OpenSSL license. +# ==================================================================== +# +# SHA256/512_Transform for Itanium. +# +# sha512_block runs in 1003 cycles on Itanium 2, which is almost 50% +# faster than gcc and >60%(!) faster than code generated by HP-UX +# compiler (yes, HP-UX is generating slower code, because unlike gcc, +# it failed to deploy "shift right pair," 'shrp' instruction, which +# substitutes for 64-bit rotate). +# +# 924 cycles long sha256_block outperforms gcc by over factor of 2(!) +# and HP-UX compiler - by >40% (yes, gcc won sha512_block, but lost +# this one big time). Note that "formally" 924 is about 100 cycles +# too much. I mean it's 64 32-bit rounds vs. 80 virtually identical +# 64-bit ones and 1003*64/80 gives 802. Extra cycles, 2 per round, +# are spent on extra work to provide for 32-bit rotations. 32-bit +# rotations are still handled by 'shrp' instruction and for this +# reason lower 32 bits are deposited to upper half of 64-bit register +# prior 'shrp' issue. And in order to minimize the amount of such +# operations, X[16] values are *maintained* with copies of lower +# halves in upper halves, which is why you'll spot such instructions +# as custom 'mux2', "parallel 32-bit add," 'padd4' and "parallel +# 32-bit unsigned right shift," 'pshr4.u' instructions here. +# +# Rules of engagement. +# +# There is only one integer shifter meaning that if I have two rotate, +# deposit or extract instructions in adjacent bundles, they shall +# split [at run-time if they have to]. But note that variable and +# parallel shifts are performed by multi-media ALU and *are* pairable +# with rotates [and alike]. On the backside MMALU is rather slow: it +# takes 2 extra cycles before the result of integer operation is +# available *to* MMALU and 2(*) extra cycles before the result of MM +# operation is available "back" *to* integer ALU, not to mention that +# MMALU itself has 2 cycles latency. However! I explicitly scheduled +# these MM instructions to avoid MM stalls, so that all these extra +# latencies get "hidden" in instruction-level parallelism. +# +# (*) 2 cycles on Itanium 1 and 1 cycle on Itanium 2. But I schedule +# for 2 in order to provide for best *overall* performance, +# because on Itanium 1 stall on MM result is accompanied by +# pipeline flush, which takes 6 cycles:-( +# +# Resulting performance numbers for 900MHz Itanium 2 system: +# +# The 'numbers' are in 1000s of bytes per second processed. +# type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes +# sha1(*) 6210.14k 20376.30k 52447.83k 85870.05k 105478.12k +# sha256 7476.45k 20572.05k 41538.34k 56062.29k 62093.18k +# sha512 4996.56k 20026.28k 47597.20k 85278.79k 111501.31k +# +# (*) SHA1 numbers are for HP-UX compiler and are presented purely +# for reference purposes. I bet it can improved too... +# +# To generate code, pass the file name with either 256 or 512 in its +# name and compiler flags. + +$output=shift; + +if ($output =~ /512.*\.[s|asm]/) { + $SZ=8; + $BITS=8*$SZ; + $LDW="ld8"; + $STW="st8"; + $ADD="add"; + $SHRU="shr.u"; + $TABLE="K512"; + $func="sha512_block"; + @Sigma0=(28,34,39); + @Sigma1=(14,18,41); + @sigma0=(1, 8, 7); + @sigma1=(19,61, 6); + $rounds=80; +} elsif ($output =~ /256.*\.[s|asm]/) { + $SZ=4; + $BITS=8*$SZ; + $LDW="ld4"; + $STW="st4"; + $ADD="padd4"; + $SHRU="pshr4.u"; + $TABLE="K256"; + $func="sha256_block"; + @Sigma0=( 2,13,22); + @Sigma1=( 6,11,25); + @sigma0=( 7,18, 3); + @sigma1=(17,19,10); + $rounds=64; +} else { die "nonsense $output"; } + +open STDOUT,">$output" || die "can't open $output: $!"; + +if ($^O eq "hpux") { + $ADDP="addp4"; + for (@ARGV) { $ADDP="add" if (/[\+DD|\-mlp]64/); } +} else { $ADDP="add"; } +for (@ARGV) { $big_endian=1 if (/\-DB_ENDIAN/); + $big_endian=0 if (/\-DL_ENDIAN/); } +if (!defined($big_endian)) + { $big_endian=(unpack('L',pack('N',1))==1); } + +$code=<<___; +.ident \"$output, version 1.0\" +.ident \"IA-64 ISA artwork by Andy Polyakov <appro\@fy.chalmers.se>\" +.explicit +.text + +prsave=r14; +K=r15; +A=r16; B=r17; C=r18; D=r19; +E=r20; F=r21; G=r22; H=r23; +T1=r24; T2=r25; +s0=r26; s1=r27; t0=r28; t1=r29; +Ktbl=r30; +ctx=r31; // 1st arg +input=r48; // 2nd arg +num=r49; // 3rd arg +sgm0=r50; sgm1=r51; // small constants + +// void $func (SHA_CTX *ctx, const void *in,size_t num[,int host]) +.global $func# +.proc $func# +.align 32 +$func: + .prologue + .fframe 0 + .save ar.pfs,r2 + .save ar.lc,r3 + .save pr,prsave +{ .mmi; alloc r2=ar.pfs,3,17,0,16 + $ADDP ctx=0,r32 // 1st arg + mov r3=ar.lc } +{ .mmi; $ADDP input=0,r33 // 2nd arg + addl Ktbl=\@ltoff($TABLE#),gp + mov prsave=pr };; + + .body +{ .mii; ld8 Ktbl=[Ktbl] + mov num=r34 };; // 3rd arg + +{ .mib; add r8=0*$SZ,ctx + add r9=1*$SZ,ctx + brp.loop.imp .L_first16,.L_first16_ctop + } +{ .mib; add r10=2*$SZ,ctx + add r11=3*$SZ,ctx + brp.loop.imp .L_rest,.L_rest_ctop + };; +// load A-H +{ .mmi; $LDW A=[r8],4*$SZ + $LDW B=[r9],4*$SZ + mov sgm0=$sigma0[2] } +{ .mmi; $LDW C=[r10],4*$SZ + $LDW D=[r11],4*$SZ + mov sgm1=$sigma1[2] };; +{ .mmi; $LDW E=[r8] + $LDW F=[r9] } +{ .mmi; $LDW G=[r10] + $LDW H=[r11] + cmp.ne p15,p14=0,r35 };; // used in sha256_block + +.L_outer: +{ .mii; mov ar.lc=15 + mov ar.ec=1 };; +.align 32 +.L_first16: +.rotr X[16] +___ +$t0="t0", $t1="t1", $code.=<<___ if ($BITS==32); +{ .mib; (p14) add r9=1,input + (p14) add r10=2,input } +{ .mib; (p14) add r11=3,input + (p15) br.dptk.few .L_host };; +{ .mmi; (p14) ld1 r8=[input],$SZ + (p14) ld1 r9=[r9] } +{ .mmi; (p14) ld1 r10=[r10] + (p14) ld1 r11=[r11] };; +{ .mii; (p14) dep r9=r8,r9,8,8 + (p14) dep r11=r10,r11,8,8 };; +{ .mib; (p14) dep X[15]=r9,r11,16,16 };; +.L_host: +{ .mib; (p15) $LDW X[15]=[input],$SZ // X[i]=*input++ + dep.z $t1=E,32,32 } +{ .mib; $LDW K=[Ktbl],$SZ + zxt4 E=E };; +{ .mmi; or $t1=$t1,E + and T1=F,E + and T2=A,B } +{ .mmi; andcm r8=G,E + and r9=A,C + mux2 $t0=A,0x44 };; // copy lower half to upper +{ .mib; xor T1=T1,r8 // T1=((e & f) ^ (~e & g)) + _rotr r11=$t1,$Sigma1[0] } // ROTR(e,14) +{ .mib; and r10=B,C + xor T2=T2,r9 };; +___ +$t0="A", $t1="E", $code.=<<___ if ($BITS==64); +{ .mmi; $LDW X[15]=[input],$SZ // X[i]=*input++ + and T1=F,E + and T2=A,B } +{ .mmi; $LDW K=[Ktbl],$SZ + andcm r8=G,E + and r9=A,C };; +{ .mmi; xor T1=T1,r8 //T1=((e & f) ^ (~e & g)) + and r10=B,C + _rotr r11=$t1,$Sigma1[0] } // ROTR(e,14) +{ .mmi; xor T2=T2,r9 + mux1 X[15]=X[15],\@rev };; // eliminated in big-endian +___ +$code.=<<___; +{ .mib; add T1=T1,H // T1=Ch(e,f,g)+h + _rotr r8=$t1,$Sigma1[1] } // ROTR(e,18) +{ .mib; xor T2=T2,r10 // T2=((a & b) ^ (a & c) ^ (b & c)) + mov H=G };; +{ .mib; xor r11=r8,r11 + _rotr r9=$t1,$Sigma1[2] } // ROTR(e,41) +{ .mib; mov G=F + mov F=E };; +{ .mib; xor r9=r9,r11 // r9=Sigma1(e) + _rotr r10=$t0,$Sigma0[0] } // ROTR(a,28) +{ .mib; add T1=T1,K // T1=Ch(e,f,g)+h+K512[i] + mov E=D };; +{ .mib; add T1=T1,r9 // T1+=Sigma1(e) + _rotr r11=$t0,$Sigma0[1] } // ROTR(a,34) +{ .mib; mov D=C + mov C=B };; +{ .mib; add T1=T1,X[15] // T1+=X[i] + _rotr r8=$t0,$Sigma0[2] } // ROTR(a,39) +{ .mib; xor r10=r10,r11 + mux2 X[15]=X[15],0x44 };; // eliminated in 64-bit +{ .mmi; xor r10=r8,r10 // r10=Sigma0(a) + mov B=A + add A=T1,T2 };; +.L_first16_ctop: +{ .mib; add E=E,T1 + add A=A,r10 // T2=Maj(a,b,c)+Sigma0(a) + br.ctop.sptk .L_first16 };; + +{ .mib; mov ar.lc=$rounds-17 } +{ .mib; mov ar.ec=1 };; +.align 32 +.L_rest: +.rotr X[16] +{ .mib; $LDW K=[Ktbl],$SZ + _rotr r8=X[15-1],$sigma0[0] } // ROTR(s0,1) +{ .mib; $ADD X[15]=X[15],X[15-9] // X[i&0xF]+=X[(i+9)&0xF] + $SHRU s0=X[15-1],sgm0 };; // s0=X[(i+1)&0xF]>>7 +{ .mib; and T1=F,E + _rotr r9=X[15-1],$sigma0[1] } // ROTR(s0,8) +{ .mib; andcm r10=G,E + $SHRU s1=X[15-14],sgm1 };; // s1=X[(i+14)&0xF]>>6 +{ .mmi; xor T1=T1,r10 // T1=((e & f) ^ (~e & g)) + xor r9=r8,r9 + _rotr r10=X[15-14],$sigma1[0] };;// ROTR(s1,19) +{ .mib; and T2=A,B + _rotr r11=X[15-14],$sigma1[1] }// ROTR(s1,61) +{ .mib; and r8=A,C };; +___ +$t0="t0", $t1="t1", $code.=<<___ if ($BITS==32); +// I adhere to mmi; in order to hold Itanium 1 back and avoid 6 cycle +// pipeline flush in last bundle. Note that even on Itanium2 the +// latter stalls for one clock cycle... +{ .mmi; xor s0=s0,r9 // s0=sigma0(X[(i+1)&0xF]) + dep.z $t1=E,32,32 } +{ .mmi; xor r10=r11,r10 + zxt4 E=E };; +{ .mmi; or $t1=$t1,E + xor s1=s1,r10 // s1=sigma1(X[(i+14)&0xF]) + mux2 $t0=A,0x44 };; // copy lower half to upper +{ .mmi; xor T2=T2,r8 + _rotr r9=$t1,$Sigma1[0] } // ROTR(e,14) +{ .mmi; and r10=B,C + add T1=T1,H // T1=Ch(e,f,g)+h + $ADD X[15]=X[15],s0 };; // X[i&0xF]+=sigma0(X[(i+1)&0xF]) +___ +$t0="A", $t1="E", $code.=<<___ if ($BITS==64); +{ .mib; xor s0=s0,r9 // s0=sigma0(X[(i+1)&0xF]) + _rotr r9=$t1,$Sigma1[0] } // ROTR(e,14) +{ .mib; xor r10=r11,r10 + xor T2=T2,r8 };; +{ .mib; xor s1=s1,r10 // s1=sigma1(X[(i+14)&0xF]) + add T1=T1,H } +{ .mib; and r10=B,C + $ADD X[15]=X[15],s0 };; // X[i&0xF]+=sigma0(X[(i+1)&0xF]) +___ +$code.=<<___; +{ .mmi; xor T2=T2,r10 // T2=((a & b) ^ (a & c) ^ (b & c)) + mov H=G + _rotr r8=$t1,$Sigma1[1] };; // ROTR(e,18) +{ .mmi; xor r11=r8,r9 + $ADD X[15]=X[15],s1 // X[i&0xF]+=sigma1(X[(i+14)&0xF]) + _rotr r9=$t1,$Sigma1[2] } // ROTR(e,41) +{ .mmi; mov G=F + mov F=E };; +{ .mib; xor r9=r9,r11 // r9=Sigma1(e) + _rotr r10=$t0,$Sigma0[0] } // ROTR(a,28) +{ .mib; add T1=T1,K // T1=Ch(e,f,g)+h+K512[i] + mov E=D };; +{ .mib; add T1=T1,r9 // T1+=Sigma1(e) + _rotr r11=$t0,$Sigma0[1] } // ROTR(a,34) +{ .mib; mov D=C + mov C=B };; +{ .mmi; add T1=T1,X[15] // T1+=X[i] + xor r10=r10,r11 + _rotr r8=$t0,$Sigma0[2] };; // ROTR(a,39) +{ .mmi; xor r10=r8,r10 // r10=Sigma0(a) + mov B=A + add A=T1,T2 };; +.L_rest_ctop: +{ .mib; add E=E,T1 + add A=A,r10 // T2=Maj(a,b,c)+Sigma0(a) + br.ctop.sptk .L_rest };; + +{ .mib; add r8=0*$SZ,ctx + add r9=1*$SZ,ctx } +{ .mib; add r10=2*$SZ,ctx + add r11=3*$SZ,ctx };; +{ .mmi; $LDW r32=[r8],4*$SZ + $LDW r33=[r9],4*$SZ } +{ .mmi; $LDW r34=[r10],4*$SZ + $LDW r35=[r11],4*$SZ + cmp.ltu p6,p7=1,num };; +{ .mmi; $LDW r36=[r8],-4*$SZ + $LDW r37=[r9],-4*$SZ +(p6) add Ktbl=-$SZ*$rounds,Ktbl } +{ .mmi; $LDW r38=[r10],-4*$SZ + $LDW r39=[r11],-4*$SZ +(p7) mov ar.lc=r3 };; +{ .mmi; add A=A,r32 + add B=B,r33 + add C=C,r34 } +{ .mmi; add D=D,r35 + add E=E,r36 + add F=F,r37 };; +{ .mmi; $STW [r8]=A,4*$SZ + $STW [r9]=B,4*$SZ + add G=G,r38 } +{ .mmi; $STW [r10]=C,4*$SZ + $STW [r11]=D,4*$SZ + add H=H,r39 };; +{ .mmi; $STW [r8]=E + $STW [r9]=F +(p6) add num=-1,num } +{ .mmb; $STW [r10]=G + $STW [r11]=H +(p6) br.dptk.many .L_outer };; + +{ .mib; mov pr=prsave,0x1ffff + br.ret.sptk.many b0 };; +.endp $func# +___ + +$code =~ s/\`([^\`]*)\`/eval $1/gem; +$code =~ s/_rotr(\s+)([^=]+)=([^,]+),([0-9]+)/shrp$1$2=$3,$3,$4/gm; +if ($BITS==64) { + $code =~ s/mux2(\s+)\S+/nop.i$1 0x0/gm; + $code =~ s/mux1(\s+)\S+/nop.i$1 0x0/gm if ($big_endian); +} + +print $code; + +print<<___ if ($BITS==32); +.align 64 +.type K256#,\@object +K256: data4 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 + data4 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 + data4 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 + data4 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 + data4 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc + data4 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da + data4 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 + data4 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 + data4 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 + data4 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 + data4 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 + data4 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 + data4 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 + data4 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 + data4 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 + data4 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 +.size K256#,$SZ*$rounds +___ +print<<___ if ($BITS==64); +.align 64 +.type K512#,\@object +K512: data8 0x428a2f98d728ae22,0x7137449123ef65cd + data8 0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc + data8 0x3956c25bf348b538,0x59f111f1b605d019 + data8 0x923f82a4af194f9b,0xab1c5ed5da6d8118 + data8 0xd807aa98a3030242,0x12835b0145706fbe + data8 0x243185be4ee4b28c,0x550c7dc3d5ffb4e2 + data8 0x72be5d74f27b896f,0x80deb1fe3b1696b1 + data8 0x9bdc06a725c71235,0xc19bf174cf692694 + data8 0xe49b69c19ef14ad2,0xefbe4786384f25e3 + data8 0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65 + data8 0x2de92c6f592b0275,0x4a7484aa6ea6e483 + data8 0x5cb0a9dcbd41fbd4,0x76f988da831153b5 + data8 0x983e5152ee66dfab,0xa831c66d2db43210 + data8 0xb00327c898fb213f,0xbf597fc7beef0ee4 + data8 0xc6e00bf33da88fc2,0xd5a79147930aa725 + data8 0x06ca6351e003826f,0x142929670a0e6e70 + data8 0x27b70a8546d22ffc,0x2e1b21385c26c926 + data8 0x4d2c6dfc5ac42aed,0x53380d139d95b3df + data8 0x650a73548baf63de,0x766a0abb3c77b2a8 + data8 0x81c2c92e47edaee6,0x92722c851482353b + data8 0xa2bfe8a14cf10364,0xa81a664bbc423001 + data8 0xc24b8b70d0f89791,0xc76c51a30654be30 + data8 0xd192e819d6ef5218,0xd69906245565a910 + data8 0xf40e35855771202a,0x106aa07032bbd1b8 + data8 0x19a4c116b8d2d0c8,0x1e376c085141ab53 + data8 0x2748774cdf8eeb99,0x34b0bcb5e19b48a8 + data8 0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb + data8 0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3 + data8 0x748f82ee5defb2fc,0x78a5636f43172f60 + data8 0x84c87814a1f0ab72,0x8cc702081a6439ec + data8 0x90befffa23631e28,0xa4506cebde82bde9 + data8 0xbef9a3f7b2c67915,0xc67178f2e372532b + data8 0xca273eceea26619c,0xd186b8c721c0c207 + data8 0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178 + data8 0x06f067aa72176fba,0x0a637dc5a2c898a6 + data8 0x113f9804bef90dae,0x1b710b35131c471b + data8 0x28db77f523047d84,0x32caab7b40c72493 + data8 0x3c9ebe0a15c9bebc,0x431d67c49c100d4c + data8 0x4cc5d4becb3e42b6,0x597f299cfc657e2a + data8 0x5fcb6fab3ad6faec,0x6c44198c4a475817 +.size K512#,$SZ*$rounds +___ |