diff options
Diffstat (limited to 'crypto/openssl/config')
-rwxr-xr-x | crypto/openssl/config | 233 |
1 files changed, 181 insertions, 52 deletions
diff --git a/crypto/openssl/config b/crypto/openssl/config index 40ad0fe..8988f66 100755 --- a/crypto/openssl/config +++ b/crypto/openssl/config @@ -20,6 +20,31 @@ # Be as similar to the output of config.guess/config.sub # as possible. +PREFIX="" +SUFFIX="" +TEST="false" + +# pick up any command line args to config +for i +do +case "$i" in +-d*) PREFIX="debug-";; +-t*) TEST="true";; +-h*) TEST="true"; cat <<EOF +Usage: config [options] + -d Add a debug- prefix to machine choice. + -t Test mode, do not run the Configure perl script. + -h This help. + +Any other text will be passed to the Configure perl script. +See INSTALL for instructions. + +EOF +;; +*) options=$options" $i" ;; +esac +done + # First get uname entries that we use below MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown" @@ -68,7 +93,7 @@ if [ "x$XREL" != "x" ]; then 4.2) echo "whatever-whatever-unixware1"; exit 0 ;; - OpenUNIX) + OpenUNIX) if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0 fi @@ -115,10 +140,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in HP-UX:*) HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "$HPUXVER" in - 11.*) - echo "${MACHINE}-hp-hpux11"; exit 0 - ;; - 10.*) + 1[0-9].*) # HPUX 10 and 11 targets are unified echo "${MACHINE}-hp-hpux10"; exit 0 ;; *) @@ -147,6 +169,10 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in echo "${MACHINE}-whatever-linux1"; exit 0 ;; + GNU*) + echo "hurd-x86"; exit 0; + ;; + LynxOS:*) echo "${MACHINE}-lynx-lynxos"; exit 0 ;; @@ -243,7 +269,15 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in ;; Darwin:*) - echo "ppc-apple-darwin"; exit 0 + case "$MACHINE" in + Power*) + echo "ppc-apple-darwin${VERSION}" + ;; + *) + echo "i386-apple-darwin${VERSION}" + ;; + esac + exit 0 ;; SunOS:5.*) @@ -317,6 +351,10 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in *CRAY*) echo "j90-cray-unicos"; exit 0; ;; + + NONSTOP_KERNEL*) + echo "nsr-tandem-nsk"; exit 0; + ;; esac # @@ -354,31 +392,6 @@ exit 0 # this is where the translation occurs into SSLeay terms # --------------------------------------------------------------------------- -PREFIX="" -SUFFIX="" -TEST="false" - -# pick up any command line args to config -for i -do -case "$i" in --d*) PREFIX="debug-";; --t*) TEST="true";; --h*) TEST="true"; cat <<EOF -Usage: config [options] - -d Add a debug- prefix to machine choice. - -t Test mode, do not run the Configure perl script. - -h This help. - -Any other text will be passed to the Configure perl script. -See INSTALL for instructions. - -EOF -;; -*) options=$options" $i" ;; -esac -done - # figure out if gcc is available and if so we use it otherwise # we fallback to whatever cc does on the system GCCVER=`(gcc -dumpversion) 2>/dev/null` @@ -409,6 +422,15 @@ if [ "$SYSTEM" = "HP-UX" ];then fi fi if [ "$SYSTEM" = "SunOS" ]; then + if [ $GCCVER -ge 30 ]; then + # 64-bit ABI isn't officially supported in gcc 3.0, but it appears + # to be working, at the very least 'make test' passes... + if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then + GCC_ARCH="-m64" + else + GCC_ARCH="-m32" + fi + fi # check for WorkShop C, expected output is "cc: blah-blah C x.x" CCVER=`(cc -V 2>&1) 2>/dev/null | \ egrep -e '^cc: .* C [0-9]\.[0-9]' | \ @@ -439,7 +461,6 @@ if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then fi fi -GCCVER=${GCCVER:-0} CCVER=${CCVER:-0} # read the output of the embedded GuessOS @@ -472,8 +493,10 @@ case "$GUESSOS" in mips4-sgi-irix64) echo "WARNING! If you wish to build 64-bit library, then you have to" echo " invoke './Configure irix64-mips4-$CC' *manually*." - echo " Type return if you want to continue, Ctrl-C to abort." - read waste < /dev/tty + if [ "$TEST" = "false" ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (stty -icanon min 0 time 50; read waste) < /dev/tty + fi CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` CPU=${CPU:-0} if [ $CPU -ge 5000 ]; then @@ -521,14 +544,16 @@ EOF m68k-*-linux*) OUT="linux-m68k" ;; ia64-*-linux?) OUT="linux-ia64" ;; ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;; - ppc-apple-darwin) OUT="darwin-ppc-cc" ;; + ppc-apple-darwin*) OUT="darwin-ppc-cc" ;; + i386-apple-darwin*) OUT="darwin-i386-cc" ;; sparc64-*-linux2) - #Before we can uncomment following lines we have to wait at least - #till 64-bit glibc for SPARC is operational:-( - #echo "WARNING! If you wish to build 64-bit library, then you have to" - #echo " invoke './Configure linux64-sparcv9' *manually*." - #echo " Type return if you want to continue, Ctrl-C to abort." - #read waste < /dev/tty + echo "WARNING! If *know* that your GNU C supports 64-bit/V9 ABI" + echo " and wish to build 64-bit library, then you have to" + echo " invoke './Configure linux64-sparcv9' *manually*." + if [ "$TEST" = "false" ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (stty -icanon min 0 time 50; read waste) < /dev/tty + fi OUT="linux-sparcv9" ;; sparc-*-linux2) KARCH=`awk '/^type/{print$3}' /proc/cpuinfo` @@ -561,17 +586,54 @@ EOF arm*-*-linux2) OUT="linux-elf-arm" ;; s390-*-linux2) OUT="linux-s390" ;; s390x-*-linux?) OUT="linux-s390x" ;; - *-*-linux2) OUT="linux-elf" ;; + x86_64-*-linux?) OUT="linux-x86_64" ;; + *-*-linux2) OUT="linux-elf" + if [ "$GCCVER" -gt 28 ]; then + if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then + OUT="linux-pentium" + fi + if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then + OUT="linux-ppro" + fi + if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then + OUT="linux-k6" + fi + fi ;; *-*-linux1) OUT="linux-aout" ;; sun4u*-*-solaris2) + OUT="solaris-sparcv9-$CC" ISA64=`(isalist) 2>/dev/null | grep sparcv9` - if [ "$ISA64" != "" -a "$CC" = "cc" -a $CCVER -ge 50 ]; then + if [ "$ISA64" != "" ]; then + if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then echo "WARNING! If you wish to build 64-bit library, then you have to" echo " invoke './Configure solaris64-sparcv9-cc' *manually*." - echo " Type return if you want to continue, Ctrl-C to abort." - read waste < /dev/tty + if [ "$TEST" = "false" ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (stty -icanon min 0 time 50; read waste) < /dev/tty + fi + elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then + # $GCC_ARCH denotes default ABI chosen by compiler driver + # (first one found on the $PATH). I assume that user + # expects certain consistency with the rest of his builds + # and therefore switch over to 64-bit. <appro> + OUT="solaris64-sparcv9-gcc" + echo "WARNING! If you wish to build 32-bit library, then you have to" + echo " invoke './Configure solaris-sparcv9-gcc' *manually*." + if [ "$TEST" = "false" ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (stty -icanon min 0 time 50; read waste) < /dev/tty + fi + elif [ "$GCC_ARCH" = "-m32" ]; then + echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI" + echo " and wish to build 64-bit library, then you have to" + echo " invoke './Configure solaris64-sparcv9-gcc' *manually*." + if [ "$TEST" = "false" ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (stty -icanon min 0 time 50; read waste) < /dev/tty + fi + fi fi - OUT="solaris-sparcv9-$CC" ;; + ;; sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;; sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;; sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;; @@ -583,9 +645,17 @@ EOF *86*-*-netbsd) OUT="NetBSD-x86" ;; sun3*-*-netbsd) OUT="NetBSD-m68" ;; *-*-netbsd) OUT="NetBSD-sparc" ;; - *86*-*-openbsd) OUT="OpenBSD-x86" ;; alpha*-*-openbsd) OUT="OpenBSD-alpha" ;; + *86*-*-openbsd) OUT="OpenBSD-i386" ;; + m68k*-*-openbsd) OUT="OpenBSD-m68k" ;; + m88k*-*-openbsd) OUT="OpenBSD-m88k" ;; + mips*-*-openbsd) OUT="OpenBSD-mips" ;; pmax*-*-openbsd) OUT="OpenBSD-mips" ;; + powerpc*-*-openbsd) OUT="OpenBSD-powerpc" ;; + sparc64*-*-openbsd) OUT="OpenBSD-sparc64" ;; + sparc*-*-openbsd) OUT="OpenBSD-sparc" ;; + vax*-*-openbsd) OUT="OpenBSD-vax" ;; + hppa*-*-openbsd) OUT="OpenBSD-hppa" ;; *-*-openbsd) OUT="OpenBSD" ;; *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;; *-*-osf) OUT="alphaold-cc" ;; @@ -620,6 +690,37 @@ EOF else OUT="hpux-parisc-$CC" fi + KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null` + KERNEL_BITS=${KERNEL_BITS:-32} + CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null` + CPU_VERSION=${CPU_VERSION:-0} + # See <sys/unistd.h> for further info on CPU_VERSION. + if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU + echo "NOTICE! 64-bit is the only ABI currently operational on HP-UXi." + echo " Post request to openssl-dev@openssl.org for 32-bit support." + if [ "$TEST" = "false" ]; then + (stty -icanon min 0 time 50; read waste) < /dev/tty + fi + OUT="hpux64-ia64-cc" + elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU + if [ "$CC" = "cc" ]; then + OUT="hpux-parisc2-cc" # can't we have hpux-parisc2-gcc? + fi + if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then + echo "WARNING! If you wish to build 64-bit library then you have to" + echo " invoke './Configure hpux64-parisc2-cc' *manually*." + if [ "$TEST" = "false" ]; then + echo " You have about 5 seconds to press Ctrl-C to abort." + (stty -icanon min 0 time 50; read waste) < /dev/tty + fi + fi + elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU + : + elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU + : + else # Motorola(?) CPU + OUT="hpux-$CC" + fi options="$options -D_REENTRANT" ;; *-hpux) OUT="hpux-parisc-$CC" ;; # these are all covered by the catchall below @@ -630,14 +731,21 @@ EOF *-*-cygwin) OUT="Cygwin" ;; t3e-cray-unicosmk) OUT="cray-t3e" ;; j90-cray-unicos) OUT="cray-j90" ;; + nsr-tandem-nsk) OUT="tandem-c89" ;; *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;; esac +# NB: This atalla support has been superceded by the ENGINE support +# That contains its own header and definitions anyway. Support can +# be enabled or disabled on any supported platform without external +# headers, eg. by adding the "hw-atalla" switch to ./config or +# perl Configure +# # See whether we can compile Atalla support -if [ -f /usr/include/atasi.h ] -then - options="$options -DATALLA" -fi +#if [ -f /usr/include/atasi.h ] +#then +# options="$options -DATALLA" +#fi # gcc < 2.8 does not support -mcpu=ultrasparc if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ] @@ -658,7 +766,7 @@ case "$GUESSOS" in i386-*) options="$options 386" ;; esac -for i in bf cast des dh dsa hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha +for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha do if [ ! -d crypto/$i ] then @@ -666,6 +774,27 @@ do fi done +# Discover Kerberos 5 (since it's still a prototype, we don't +# do any guesses yet, that's why this section is commented away. +#if [ -d /usr/kerberos ]; then +# krb5_dir=/usr/kerberos +# if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\ +# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ +# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ +# -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\ +# -a \( -f $krb5_dir/include/krb5.h \) ]; then +# options="$options --with-krb5-flavor=MIT" +# fi +#elif [ -d /usr/heimdal ]; then +# krb5_dir=/usr/heimdal +# if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\ +# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ +# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ +# -a \( -f $krb5_dir/include/krb5.h \) ]; then +# options="$options --with-krb5-flavor=Heimdal" +# fi +#fi + if [ -z "$OUT" ]; then OUT="$CC" fi |